sunanda's latest bill of quantities water proofing

8/11/2019 Sunanda's Latest Bill of Quantities water proofing

1/28

SUNANDASPECIALITY COATINGS PVT.LTD

BILL OF QUANTITIES

INDIA U.S.A. U.A.E. TANZANIA GHANA KENYA

ETHIOPIA MALDIVES NEPAL AFGHANISTAN RUSSIA OMAN

CONCRETE MATERIALS CONSULTANCY DIVISIONSatyadham, Road No. 2, Sion (E),

Mumbai400 022, India

Tel: +91-22-24034130 / Fax: +91-22-24034133

Email :[email protected]

Website :www.sunandaglobal.com

Consultants for Building Materials

Manufacturers of Construction Chemicals since 1979

ISO 9001:200
mailto:[email protected]:[email protected]:[email protected]://www.sunandaglobal.com/http://www.sunandaglobal.com/http://www.sunandaglobal.com/http://www.sunandaglobal.com/mailto:[email protected]


2/28

2

Sunanda Speciality Coatings Pvt. Ltd. www.sunandaglobal.com

SUNANDAS P E C I A L I T Y C O A T I N G S P V T . L T D

A N I S O 9 0 0 1 : 2 0 0 8 C O M P A N Y

I N D E X

Sr. No. PARTICULARS Pg No

A. SPECIALISED ADMIXTURES FOR PCC & RCC WORKS

1. Integral Waterproofing Admixture for PCC Works 4

2. Superplasticisers for RCC Members 4

3. Integral Corrosion Inhibiting Admixture for RCC Members 5

4. Protection to Foundation from Chloride Attack. 5

Option 1 - Tar Modified Epoxy Coating For Foundation Protection

Option 2 Polymer Modified Bitumous Coating For Foundation Protection

5. Repairs of Honeycombed Concrete 6

B. EXTERNAL APPLICATIONS

6. External Crackless Plaster 7

7. Waterproofing of Dead Walls 7

8.100% Acrylic, Decorative, Waterproof And Heat Insulating Paint For External

Walls

8

9. Textured Paint/ Finish 9

10. Treatment to Tie- Rod Hole On Mivan Shuttering Walls 9

C. WATERPROOFING TREATMENT TO VARIOUS AREAS11. Podium Waterproofing

Waterproofing Treatment to Softscape Area 10-11

Waterproofing & Anti-Rooting Treatment To Planter Boxes 11

Waterproofing Treatment to Hardscape Area 11-12-13

12. Waterproofing Treatment of Water bodies 13-14

13. Waterproofing Treatment to R.C.C. Terrace Slab 14-15

14. Waterproofing Treatment to Toilet Blocks 16-17

15. Waterproofing Treatment to O.H.W.T. 17-18

16. Waterproofing Treatment to RCC Bore Packing 19


3/28

3



A N I S O 9 0 0 1 : 2 0 0 8 C O M P A N Y

D. DIFFERENT TYPES OF BONDING AGENT

17. Bonding Agent for C.M. Plaster with RCC Surface 20

18. Bonding Agent for RCC Construction Joints 2019. Bonding Agent for Gypsum Plaster 20

20. Bonding Agent for Tile Fixing. 21

E. VARIOUS COATINGS & APPLICATION FOR CAR PARKING AREAS

21. Anti-Carbonation Coating 22

22. Epoxy Coating 22

23. Non-Metallic Floor Hardeners 23

Option1 : Dust Proof Liquid Floor Hardener

Option2: Dry Shake Floor Hardener

24. Hygienic Coating for Water Tanks 23

F. ANTI-CORROSIVE TREATMENT TO STEEL

25. Rust Removal and Conversion for Steel 24

26. Rust Passivation of Steel 24

27. Corrosion Protection to Steel With Sacrificial Anode -SUNANODE 24

28. Integral Corrosion Inhibiting Admixture 25

29. PU Coating For Protection to Structural Steel/ Railings/ Grills 25

G. ANCHORING OF DOWEL BARS

30. Anchoring Dowel Bars in RCC Members Using Epoxy Grouts 26

31. Rock Anchoring for Foundations/Rafts Using Microconcrete 26

H. CURING COMPOUNDS

32. Curing Compounds 27

I. EPOXY FLOORING

33a 1mm Self Levelling Epoxy flooring 28

33b 2mm Self Levelling Epoxy flooring 28

33c 3mm Epoxy Screed + Self Levelling Epoxy flooring 28


4/28

4



A N I S O 9 0 0 1 : 2 0 0 8 C O M P A N Y

Sr. No Description of Works Qty Per Rate

Rs.

Amoun

Rs.

A. SPECIALISED ADMIXTURES FOR PCC & RCC WORKS

1. INTEGRAL WATERPROOFING ADMIXTURE FOR PCC WORKS

A Providing and laying P.C.C. in designed grade at all

heights and levels on well compacted/sound

surfaces using a mechanical mixer including

dewatering, shuttering, vibrating, curing and

finishing as required. Admix POLYTANCRETE IWL of

M/s. Sunanda Speciality Coatings Pvt. Ltd. or

equivalent. It is to be added directly to the gauging

water @200 ml per bag of cement. The rate to

include for storage, handling, transportation of all

materials, equipments, providing material test

reports of Cement/Sand/Aggregates/Water from

manufacturer and approved testing agencies,

casting- curing and testing of concrete cubes @

three cubes/100 cum of concrete pour, etc. all

complete to the satisfaction of the EIC

Cu. m

2. SUPERPLASTICISERS FOR RCC MEMBERS

A

Providing and laying R.C.C. of designed grade at allheights and levels on well compacted/sound



finishing as required. Admix superplasticiser

POLYTANCRETE SPR of M/s. Sunanda Speciality

Coatings Pvt. Ltd. or equivalent @ 150ml-200 ml per

bag of cement The rate to include for storage,

handling, transportation of materials, equipments

etc using appropriate methods etc. complete.

a) For Footings and other foundation works Cu.m

b) For Columns at all levels Cu.m

c) For Beams at all levels. Cu.m

d) For Slabs at all levels Cu.m


5/28

5



A N I S O 9 0 0 1 : 2 0 0 8 C O M P A N Y

3. INTEGRAL CORROSION INHIBITING ADMIXTURE FOR RCC MEMBERS

Providing and laying R.C.C. of designed grade at all

heights and levels on well compacted/sound



finishing as required. Admix integral corrosion

inhibitorPOLYALK CP293of M/s. Sunanda Speciality

Coatings Pvt. Ltd. or equivalent @ 0.5 to 1% by

weight of cement depending on amount of chloride

present. The rate to include for storage, handling,

transportation of materials, equipments etc using

appropriate methods etc. complete.

Cu.m

4. PROTECTION TO FOUNDATION FROM CHLORIDE ATTACK.

Option 1 - Tar modified epoxy coating for foundation protectionA Providing and applying two coats of protective

membrane over the cured concrete surface like RCC

footings, columns, plinth beams etc. which will be

submerged under soil so as to protect the same.

Apply two pack coal tar epoxy system of SUNEPOXY

COAL TARof M/s. Sunanda Speciality Coatings Pvt.

Ltd. or equivalent.Mix Part A and Part B of

SUNEPOXY COAL TAR in 1:1 ratio with slow speed

stirrer and apply the same on a clean RCC surface by

brush. Allow to set for 8-10 hours and apply the

second coat. The rate to include for application at all

levels to various RCC elements to the satisfaction of

the EIC etc. complete. Sq. m

Option 2 Polymer modified bituminous coating for foundation protection

B Providing and applying coats of polymerized

bituminous coating of POLYALK WPBover the cured

concrete surface like RCC footings, columns, plinth

beams etc. which will be submerged under soil so as

to protect the same. Apply a primer coat of POLYALK

WPB with equal amount of water. Prime surfaceshould be allowed to dry for 24 hrs. Apply a coat of

POLYALK WPB in a continuous unbroken film. Allow

to set for 24 hours and apply the second coat. Avoid

pinholes The rate to include for application at all

levels to various RCC elements to the satisfaction of

the EIC etc. complete.

Sq.m


6/28

6



A N I S O 9 0 0 1 : 2 0 0 8 C O M P A N Y

5. REPAIRS TO HONEYCOMBED SURFACE

Clean & chip off the damaged and honeycombed RCC

portion etc. Moisten the surface and apply bonding coatof POLYALK EPof M/s. Sunanda Speciality Coatings Pvt.

Ltd. or equivalent to the entire honeycombed concrete

surface. Hand pack Polymer Modified Mortar by mixing

1 part by weight of POLYALK EP

5 parts by weight of cement

15 parts by weight of well graded sand and water to

achieve the desired consistency

At a time apply mortar layer not more than 15-20 mm

thick. The mortar should be prepared using mechanical

mixers / stirrers & should be well compacted and

finished using appropriate methods. If the thickness ofmortar required to make up the concrete section is

more; then repeat above procedure. The rate to include

for necessary compaction with mechanical plate vibrator

etc. complete to the satisfaction of the EIC. Payment will

be made on the quantity of POLYALK EPconsumed. Litrs


7/28

7



A N I S O 9 0 0 1 : 2 0 0 8 C O M P A N Y

B. EXTERNAL APPLICATIONS

6. EXTERNAL CRACKLESS PLASTER

Providing and applying 20-25 mm thick sand faced

cement plaster to external surfaces in two coats with

first coat in 12-15 mm thick in 1:4 C.M and second coat

in 8-10 mm thick in C.M 1:4 finished in proper line and

level. Add in both the coats shrinkage compensating

admixture cum plasticizer-SUNPLEX330 gms pouch of

M/s. Sunanda Speciality Coatings Pvt. Ltd. or equivalent

per 50 Kg bag of cement. Add SUNPLEX in dry machine

mix before addition of gauging water. The rate to

include for drip moulds, grooves, bands, watas at all

heights including necessary curing etc. complete. Sq.m

7. WATERPROOFING OF DEAD WALLS

Clean the receiving plastered surface of all loose

particles, dirt & rub down to original hard surface.

Inspect for cracks if any, and clean and moisten them.

Define the crack with sharp edge tool. Providing and

applying ready to use acrylic polymeric non-shrink auto-

suction putty POLYFILL-AR of M/s. Sunanda

Speciality Coatings Pvt. Ltd. or equivalent on the crack

and finish at all heights, level etc. complete. After 24

hours inspect and if required as a result of auto-suction,

provide another filling over the same.

Provide and apply 2 coats of POLYALK WP& cement in

1:1 proportion by weight in slurry form on the entire

dead walls of the building. Prepare a slurry using 1 part

by weight of POLYALK WP and 1 part by weight of fresh

cement (white) (Do not add any water). Mixing is best

done using a low-speed stirrer. Keep the mix

continuously stirred so as to ensure brushable

consistency. Air cure for 24 hrs for initial setting andthen by sprinkling water for 3 days. The rate includes

erection of scaffolding at all levels, applying coating,

curing etc. all complete as per the satisfaction of the EIC.

Sq.m


8/28

8



A N I S O 9 0 0 1 : 2 0 0 8 C O M P A N Y

8100% ACRYLIC, DECORATIVE , WATERPROOFING & HEAT INSULATING EXTERNAL PAINT

A Clean the receiving plastered surface of all loose

particles, dirt & rub down to original hard surface.

Inspect for cracks if any, and clean and moisten them.

Define the crack with sharp edge tool. Providing and

applying ready to use acrylic polymeric non-shrink auto-

suction putty POLYFILL-AR of M/s. Sunanda

Speciality Coatings Pvt. Ltd. or equivalent on the crack

and finish at all heights, level etc. complete. After 24

hours inspect and if required as a result of auto-suction,

provide another filling over the same. Provide and apply

a coat of POLYALK WP & cement in 1:1 proportion by

weight in slurry form on the crackfilled area

B Providing and applying 100% acrylic, heat insulating and

decorative external acrylic coating SUNEXT-8 of M/s.

Sunanda Speciality Coatings Pvt. Ltd. or equivalent or

equivalent or equivalent of approved shade. Mix 1 litre

of SUNEXT-8with 1 L of water and use as priming coat

on the surface. Mix 1 L of Sunext-8 with 400-500 ml of

water, stir well and apply by brush for subsequent twocoats. The process includes erection of scaffolding at all

levels, applying three coats at an interval of 4-6 hours

between each coat. Cure as normal etc. all complete as

per the satisfaction of the EIC

Sq.m


9/28

9



A N I S O 9 0 0 1 : 2 0 0 8 C O M P A N Y

9. TEXTURED PAINT/ FINISH

Clean the existing surface by scrubbing so as to remove

all the dust, dirt, grime, oil etc and washing the surface

clean with jet of water etc. complete to the satisfaction

of the EIC. Apply textured coat- POLYTEXT FINISH of


using flat trowel at a thickness of 1.5-2 mm and

repeat trowel on the spread material in one direction

only till desired finish is obtained. Remove the excess

POLYTEXT FINISHbefore material has set. Cure applied

material for 12 - 16 hours prior to application of exterior

paint. The rate includes erection of scaffolding at all

levels, applying texture finish, curing etc. all complete as

per the satisfaction of the EIC.

Sq. m

10. TREATMENT TO TIE- ROD HOLE ON MIVAN SHUTTERING WALLS

Clean the tie rod hole on the RCC surfaces and remove

dust, loose particles, etc. Apply bonding coat slurry of

POLYALK EP of M/s. Sunanda Speciality Coatings Pvt.

Ltd. or equivalent to the entire surface. Provide Hand

pack Polymer Modified Mortar within 10 to 15 minutes

i.e. (wet on wet)as per following specifications using :

2 part by weight of POLYALK EP

5 parts by weight of cement

15 parts by weight of well graded sand

The mortar should be prepared using mechanical

mixers/stirrers and should be well compacted and

finished using appropriate methods. The rate to include

for erecting necessary scaffolding, curing etc complete

to the satisfaction of the EIC.

Nos


10/28

10



A N I S O 9 0 0 1 : 2 0 0 8 C O M P A N Y

C. WATERPROOFING TREATEMENT TO VARIOUS AREAS

11 PODIUM WATERPROOFING

A WATERPROOFING TREATMENT TO SOFTSCAPE AREA1 Clean the existing surface for waterproofing treatment

of Podium slab by removing dust, dirt, loose particles,cement laitance etc. using Floor Polishing Machine.

Drilling holes at construction joints and identify

damaged/honeycombed of the concrete surface and

fixing PVC nozzles at 2-3 ft c/c and sealing the same with

PMM, then total area to be filled with water minimum

6 deep for minimum 3 days, after 3 days of ponding

slab shall be checked for leakage/ seepage even

dampness and such area shall be marked and pressure

grouting / crack filling shall be done, Identifying the

cracks, construction joints & filling the same with

Polymer Modified Mortar using POLYALK EP. Injection

grouting shall be done with providing and injection non

shrink cementations grout by mixing 2 pouches (330

gms. Each) of SUNPLEX of M/s. Sunanda Speciality

Coatings Pvt.Ltd. or equivalent and 50 kgs of cement and

sufficient water for flow ability, Grouting the same

under pressure in pre-drilled holes by grouting pump

etc. complete. After grouting is completed after 24

hours, cut the nipples and seal it with PMM etc.

complete. After completion of crackfilling & grouting

again ponding shall be done for 3 days to ensure thesuccess of pressure grouting, if there is no leakages/

seepage/ dampness then only further activities shall be

started. Providing and applying three coats of POLYALK

WP of M/s. Sunanda Speciality Coatings Pvt. Ltd. or

equivalent by mixing it in cement in 1:1.25 ratio by

weight at an interval of 24 hours. Using mechanical

stirrer for mixing.

Finally, providing and applying single coat of bonding

agent HACK-AID-PLAST of M/s. Sunanda Speciality

Coatings Pvt. Ltd. or equivalent and providing wet on

wet a cement mortar screed of 1:4 cement mortar in 12-

15 mm thickness. Air cure the same for 24 hrs and

thoroughly curing by filling water for 7 days, by making

6 vattas.


11/28

11



A N I S O 9 0 0 1 : 2 0 0 8 C O M P A N Y

2 Providing and laying thick soaked brick bat coba in CS

Mortar 1:3 to proper level and slope, curing shall be

done with filling of water for 48 hrs fill up the BBK joints

and lay metal coba in CM 1:3 by adding SUNPLEX and

making 6 vattas on the junctions of wall and floorkeeping surface rough for further tiling. Curing to be

done for minimum 7 days. by filling water with vataas,

then final inspection shall be carried out to ensure that

there are no damp patches, leakages, seepages etc at

lower slab., if any type of leakages, seepages damp

patches are found, in that case same shall be repaired /

part shall be redone as per requirement. Rate to include

for making side watta in PMM, ponding for seven days

by closing the outlets etc. complete to the satisfaction of

the EIC. Further finishing as per requirement.

3 Sealing the cutouts in the slab and the pipes passing

through the terrace floor by filling PMM/Micro-

concrete. Nos

B. WATERPROOFING & ANTI-ROOTING TREATMENT TO PLANTER BOXES

After above waterproofing application gets over as

above for planter boxes. Smoothening and proper curing

of IPS is done, mix 30% anti-rooting solution of SUN-

ANTIFUNGAL of M/s. Sunanda Speciality Coatings Pvt.

Ltd. or equivalent in water homogenously.

Provide and apply first coat of anti-rooting coating of

SUN- ANTIFUNGAL mixed with water by brush on the

cured dash coat.

Apply a second coat & third coat of SUN-ANTIFUNGAL

over the first coat by maintaining 3-4 hours time

interval.

Proceed with earth filling etc.

Sq. m

C. WATERPROOFING TREATMENT TO HARDSCAPE AREA

1 Clean the existing surface for waterproofing treatment

of Podium slab by removing dust, dirt, loose particles,

cement laitance etc. using Floor Polishing Machine.





12/28

12



A N I S O 9 0 0 1 : 2 0 0 8 C O M P A N Y






cracks, construction joints & filling the same withPolymer Modified Mortar using POLYALK EP. Injection









complete. After completion of crackfilling & groutingagain ponding shall be done for 3 days to ensure the

success of pressure grouting, if there is no leakages/


started. Providing and applying two coats of POLYALK


equivalent by mixing it in cement in 1:1.25 ratio by

weight at an interval of 24 hours. Using mechanical

stirrer for mixing.

Finally, providing and applying single coat of bonding

agent HACK-AID-PLAST of M/s. Sunanda Speciality

Coatings Pvt. Ltd. or equivalent and providing wet onwet a cement mortar screed of 1:4 cement mortar in 12-

15 mm thickness. Air cure the same for 24 hrs and

thoroughly curing by filling water for 7 days, by making

6 vattas of the EIC. Further finishing as per

requirement.

Sq. m

2 Providing and laying 4 thick soaked brick bat coba in

CS Mortar 1:3 to proper level and slope, curing shall be

done with filling of water for 48 hrs fill up the BBK jointsand lay metal coba in CM 1:3 by adding SUNPLEX and

making 6 vattas on the junctions of wall and floor

keeping surface rough for further tiling. Curing to be

done for minimum 7 days. by filling water with vataas,

then final inspection shall be carried out to ensure that

there are no damp patches, leakages, seepages etc at

lower slab., if any type of leakages, seepages damp


13/28

13



A N I S O 9 0 0 1 : 2 0 0 8 C O M P A N Y

patches are found, in that case same shall be repaired /

part shall be redone as per requirement. Rate to include

for making side watta in PMM, ponding for seven days

by closing the outlets etc. complete to the satisfaction of

the EIC. Further finishing as per requirement.

3 Sealing the cutouts in the slab and the pipes passing

through the terrace floor by filling PMM/Micro-

concrete. Nos

12. WATERPROOFING TREATMENT TO WATERBODIES

1. Clean the RCC side walls and base slab surface for

treatment by removing dust, dirt and layers of concrete

over the surface. etc. using Floor Polishing Machine.











grouting shall be done with providing and injection nonshrink cementations grout by mixing 2 pouches (330


Coatings Pvt. Ltd. or equivalent and 50 kgs of cement

and sufficient water for flow ability, Grouting the same





again ponding shall be done for 3 days to ensure the



started. Providing and applying three coats ofPOLYALK


equivalent and cement in 1:1.25 ratio at an interval of

24 hours on the slab and side walls. Apply two coats and

sure the same and apply the third coat and while it is

still wet and tacky providing wet chat/dash coat of 1:4

cement mortar in 10-12 mm thickness.

Sq. m


14/28

14



A N I S O 9 0 0 1 : 2 0 0 8 C O M P A N Y

2. Lay on the slab an average 2 thick well soaked brick

bat metal coba in cement mortar 1:4 to proper level and

slope as per instructions adding SUNPLEX - 330 gms

pouch of M/s. Sunanda Speciality Coatings Pvt. Ltd. or

equivalent or equivalent or equivalent per 50 Kg bag ofcement to the mortar mix.

Fill up the brick joints and lay metal coba in C:M 1:4

adding SUNPLEX- 330 gms pouch of M/s. Sunanda

Speciality Coatings Pvt. Ltd. or equivalent per 50 Kg bag

of cement and finished with further provision of floor

tiles. Rate to include for making side watta in PMM,

ponding for seven days by closing the outlets etc.

complete to the satisfaction of the EIC. Further finishing

as perrequirement.

Sq. m

13. WATERPROOFING TREATMENT TO R.C.C. TERRACE SLAB

A Clean the RCC terrace slab surface for treatment by

removing dust, dirt and layers of concrete over the

surface. etc. using Floor Polishing Machine. Drilling holes

at construction joints and identify



PMM, then total area to be filled with water minimum6 deep for minimum 3 days, after 3 days of ponding



















15/28

15



A N I S O 9 0 0 1 : 2 0 0 8 C O M P A N Y

started.

Providing and applying two coats of POLYALK WP of


and cement in 1:1.25 ratio at an interval of 24 hours on

the chajjas and extending it upto 10 over the side

walls. Air cure the same for 24 hours and damp cure fornext 4-5 days. Providing and applying single coat of

bonding agent HACK-AID-PLAST of M/s. Sunanda

Speciality Coatings Pvt. Ltd. or equivalent on the

POLYALK WP coating by spray and providing wet on wet

a chat/dash coat of 1:4 cement mortar in 10-12 mm

thickness.

All mortar mix to be necessarily added with SUNPLEX

330 gms pouch of M/s. Sunanda Speciality Coatings Pvt.

Ltd. or equivalent or equivalent or equivalent per 50 Kg

bag of cement. All coats of POLYALK WP to be inspectedusing a Magnifying glass by the EIC to satisfaction to

ensure pinhole free coating. Ensure mechanical mixing

of POLYALK WP and cement slurry using stirrers and

check that cement particles do not settle down in the

prepared mix. Consume the prepared mix within 30

minutes. Payment will be made as per the plan area.

Sq.m

B Lay small sized well soaked brick bat metal coba in

cement mortar 1:3 to proper level and slope as per

instructions adding SUNPLEX- 330 gms pouch of M/s.

Sunanda Speciality Coatings Pvt. Ltd. or equivalent orequivalent or equivalent per 50 Kg bag of cement to the

mortar mix.

Fill up the joints and lay I.P.S adding SUNPLEX- 330 gms

pouch of M/s. Sunanda Speciality Coatings Pvt. Ltd. or

equivalent per 50 Kg bag of cement to the cement

mortar 1:3 mixed and finished smooth with neat cement

on top so as to drain water smoothly. Make chequered

markings with a grid of 24X 24.

Provide about 9 to 12 watta along the walls with

cement mortar 1:3 small brick bats and IPS finish on the

top. Rate to include for making border at the junction of

watta and wall plaster, ponding for seven days by

closing the RW outlets and making watas etc. complete

to the satisfaction of the EIC.

Sq.m


16/28

16



A N I S O 9 0 0 1 : 2 0 0 8 C O M P A N Y

C. Providing and applying china mosaic chips over the

surface of approved make and selected design over the

I.P.S surface, vatas etc in cement mortar bedding

including cleaning, acid washing etc. complete to the

satisfaction of the EIC. Add SUNPLEX- 330 gms pouchof M/s. Sunanda Speciality Coatings Pvt. Ltd. or

equivalent per 50 Kg bag of cement to the cement

mortar bedding.

Sq.m

14. WATERPROOFING TREATMENT TO TOILET BLOCKS

A Clean the RCC slab surface & wall for treatment by


surface. etc. by mechanical means. Drilling holes at

construction joints and identify damaged/honeycombed

of the concrete surface and fixing PVC nozzles at 2-3 ft

c/c and sealing the same with PMM, then total area to

be filled with water minimum 6 deep for minimum 3

days, after 3 days of ponding slab shall be checked for

leakage/ seepage even dampness and such area shall be

marked and pressure grouting / crack filling shall be

done, Identifying the cracks, construction joints & filling

the same with Polymer Modified Mortar using POLYALK

EP. Injection grouting shall be done with providing and

injection non shrink cementations grout by mixing 2

pouches (330 gms. Each) of SUNPLEX of M/s. SunandaSpeciality Coatings Pvt.Ltd. or equivalent and 50 kgs of

cement and sufficient water for flow ability, Grouting

the same under pressure in pre-drilled holes by grouting

pump etc. complete. After grouting is completed after

24 hours, cut the nipples and seal it with PMM etc.





started.Providing and applying two coats of POLYALK WP of



the terrace slab and extending it upto 10 over the

F.F.L. Air cure the same for 24 hours and damp cure for

next 4-5 days.

Providing and applying single coat of bonding agent


17/28

17



A N I S O 9 0 0 1 : 2 0 0 8 C O M P A N Y

HACK-AID-PLASTof M/s. Sunanda Speciality Coatings

Pvt. Ltd. or equivalent on the POLYALK WP coating by

spray and providing wet on wet a chat/dash coat of 1:4

cement mortar in 10-12 mm thickness.

All mortar mix to be necessarily added with SUNPLEX

330 gms pouch of M/s. Sunanda Speciality Coatings Pvt.Ltd. or equivalent per 50 Kg bag of cement. All coats of

POLYALK WPto be inspected using a Magnifying glass

by the EIC to satisfaction to ensure pinhole free coating.

Ensure mechanical mixing of POLYALK WP and

cement slurry using stirrers and check that cement

particles do not settle down in the prepared mix.

Consume the prepared mix within 30 minutes. Payment

will be made as per the plan area.

Sq.m

B Lay an average 2 thick well soaked brick bat metalcoba in cement mortar 1:4 to proper level and slope as

per instructions adding SUNPLEX - 330 gms pouch of


or equivalent per 50 Kg bag of cement to the mortar

mix.

Fill up the brick joints and lay metal coba in C:M 1:4

adding SUNPLEX- 330 gms pouch of M/s. Sunanda

Speciality Coatings Pvt. Ltd. or equivalent or equivalent

per 50 Kg bag of cement and finished with chequered

markings for further provision of floor tiles. Rate to

include for making border at the junction of watta andwall plaster, ponding for seven days by closing the SWR

and soil outlets and making watas etc. complete to the

satisfaction of the EIC.

Sq.m

15. WATERPROOFING TREATMENT TO O.H.W.T.

1. Clean the RCC slab surface & wall for treatment by


surface. etc. by mechanical means. Ensure that all bolt

holes and sleeving of pipe inserts have been completedproperly. Drilling holes at construction joints and

identify damaged/honeycombed of the concrete surface

and fixing PVC nozzles at 2-3 ft c/c and sealing the same

with PMM, then total area to be filled with water

minimum 6 deep for minimum 3 days, after 3 days of

ponding slab shall be checked for leakage/ seepage even



18/28

18



A N I S O 9 0 0 1 : 2 0 0 8 C O M P A N Y






gms. each) of SUNPLEX of M/s. Sunanda SpecialityCoatings Pvt.Ltd. or equivalent and 50 kgs of cement and

sufficient water for flow ability, grouting the same under

pressure in pre-drilled holes by grouting pump etc.

complete. 24 hours after grouting is completed, cut the

nipples and seal it with PMM etc. complete. After

completion of crackfilling & grouting again ponding shall

be done for 3 days to ensure the success of pressure

grouting, if there is no leakages/ seepage/ dampness

then only further activities shall be started.

Providing and applying three coats of POLYALK WP ofM/s. Sunanda Speciality Coatings Pvt. Ltd. or equivalent


the slab and side walls. Apply two coats and cure the

same and apply the third coat and while it is still wet

and tacky providing wet chat/dash coat of 1:4 cement

mortar in 10-12 mm thickness. Sq.m

2. Lay Metal Coba in cement mortar in ratio1:3 by adding

SUNPLEX on the base floor with vata at wall & floor

junctions. On the side walls and ceiling provide double

coat CS 1:3 Plaster with appropriate chemicals agentsfollowed by curing for 7 days. All mortar mix to be

necessarily added with SUNPLEX 330 gms pouch of


or equivalent per 50 Kg bag of cement. All coats of

POLYALK WP to be inspected using a Magnifying glass

by the EIC to satisfaction to ensure pinhole free coating.

Ensure mechanical mixing of POLYALK WP and cement

slurry using stirrers and check that cement particles do

not settle down in the prepared mix. Consume the

prepared mix within 30 minutes. Payment will be madeas per the plan area.

Sq.m


19/28

19



A N I S O 9 0 0 1 : 2 0 0 8 C O M P A N Y

16 WATERPOOFING TREATMENT TO RCC BORE PACKING

Clean the Annular space around the pipe thoroughly;

make the concrete surface rough so as to create

bonding key for the micro-concrete to be placed.

Similarly roughen the surface of PVC pipe (the part

which is going into bore) using a rough file, wound 20

gauge GI wire around the pipe, Apply a bonding coat of

SUNEPOXY-368 (Resin 1 kg and Hardener 0.3 gms) &

after 20-30 minutes sprinkle sand layer on this portion

to make surface rough Apply one coat of POLYALK EP

the concrete and pipe surface & fill the annular space

with micro-concrete POLYCRETE A with proper

consistency and compact the same using proper tool,

leaving. After 24 hours fix the PVC nozzles in the groove

left and grout the same with cement using non shrink

cement grout prepared by mixing cement (50Kgs) andSUNPLEX (330 gms pouch) as per standard

specifications. Cut the nozzles after grouting. Pond the

water and check for water tightness of the bore packing.

Rate to include cleaning, placing in position pipe sleeve,

application of bonding coat, preparation of Pipe sleeve,

pouring of POLYCRETE-A and curing at all height sand

levels etc. complete to the satisfaction of the EIC.

Nos


20/28

20



A N I S O 9 0 0 1 : 2 0 0 8 C O M P A N Y

D. DIFFERENT TYPES OF BONDING AGENT

17. BONDING AGENT FOR C.M. PLASTER WITH RCC SURFACE

Providing and applying one pack Bonding coat between

concrete members like RCC slabs, columns, beams,Chajjas, pardis etc and cement mortar plaster using

HACK AID PLAST of M/s. Sunanda Speciality Coatings

Pvt. Ltd. or equivalent Clean the concrete surface

thoroughly to remove dust, dirt, grime, deshuttering oils

and rub down to a clean surface. Apply HACK AID PLAST

by spray on the entire concrete surface. Provide a lean

cement- sand dash coat over the same. Allow the dash

coat to set for around 24 hours. Further plastering as

per specifications can continue. The rate to include for

entire application at all heights and levels to thecomplete satisfaction of the EIC. Sq.m

18. BONDING COAT FOR CONSTRUCTION JOINTS IN CONCRETE

Providing and applying acrylic based polymeric Bonding

coat between concrete to concrete joint using POLYALK

EP of M/s. Sunanda Speciality Coatings Pvt. Ltd. or

equivalent in the ratio by weight to the entire concrete

joint. Make sure that no area is left uncovered. The rate

to include application and ensuring poring of new

concrete maintaining sufficient tacky period of the

bonding coat, and application at all heights etc.

complete or as directed by the EIC.

Sq.m

19. BONDING AGENT FOR GYPSUM PLASTER

Providing and applying Gypsum plaster (of any standard

make) to the internal walls of the surface including

bonding agent HACK AID PLAST-G of M/s. Sunanda

Speciality Coatings Pvt. Ltd. or equivalent

Apply HACK AID PLAST-G by brush/ roller or spray on

the surface. Provide Gypsum plaster over the same. All

complete as per the satisfaction of the EIC Sq.m


21/28

21



A N I S O 9 0 0 1 : 2 0 0 8 C O M P A N Y

20. BONDING AGENT FOR TILE FIXING.

Providing and fixing polymerized cementitious ready to

use tile adhesive for fixing of tiles using POLYALK TAofM/s. Sunanda Speciality Coatings Pvt. Ltd. or equivalent

.Add 20% of water by weight of POLYALK TAand lay the

same on the required area. Immediately place in

position the tile and tamp it to position so as to remove

the entrapped air and fix in position. Allow to set for 24

hours before proceeding with joint filling of the same.

The rate to include for cleaning, watering the entire

surface, laying and fixing in position of tiles at all levels

and heights to floors, walls, dado wherever necessary

etc. complete to the satisfaction of the EIC. Payment willbe made as per the plan area. Sq.m


22/28

22



A N I S O 9 0 0 1 : 2 0 0 8 C O M P A N Y

E. VARIOUS COATINGS & APPLICATION FOR CAR PARKING AREAS

21. ANTI CARBONATION COATING

A Clean the existing surface by scrubbing so as to remove

all the existing paint, dust, dirt, grime, oil etc and

washing the surface clean with jet of water etc.

complete to the satisfaction of the EIC.

B Providing and applying anti carbonation coating

SUNEXT-SP of M/s. Sunanda Speciality Coatings Pvt.

Ltd. or equivalent of approved shade. Mix 1 litre of

SUNEXT-SPwith 1 L of water and use as priming coat

on the surface. Mix 1 L of Sunext-8 with 100ml of water,

stir well and apply by roller for subsequent two coats.

The process includes erection of scaffolding at all levels,

applying three coats at an interval of 24 hours betweeneach coat curing etc. complete to the satisfaction of EIC Sq.m

22. EPOXY COATING FOR CAR PARK AREAS

A Clean the existing cured RCC surface so that it is free

from loose particles, flakes, grease, oil etc. and make

sure that the surface is dry & sound. Ensure to provide

necessary crack filling treatment if any on the existing

surface using epoxy mortar.

Mix SUNEPOXY 378of M/s. Sunanda Speciality CoatingsPvt. Ltd. or equivalent (resin and hardener in the ratio of

1:0.5 by weight) and apply by roller on the clean and dry

RCC surface. Allow to air cure for 24 hours and apply

similar two coats to achieve final finish. Rate includes

cleaning, treatment to existing cracks, application and

cleaning at all levels etc. complete to the satisfaction of

the EIC Sq. m


23/28

23



A N I S O 9 0 0 1 : 2 0 0 8 C O M P A N Y

23. NON-METALLIC FLOOR HARDENERS

OPTION 1: DUST PROOF LIQUID FLOOR HARDENER

Providing & applying coating of SUNFLOOR METALLIN

over the concrete slabs of pavements, parking lots,

swimming pool decks etc. Dilute 0.5kg SUNFLOOR

METALLINin 3.5kgs of water. Use a broom or brush for

ensuring uniform absorbency of liquid in the entire area.

After 24 hrs. prepare a solution using 1 kg SUNFLOOR

METALLIN in 3kgs of water & apply the second coat.

Apply third coat after 24 hrs using 2 kgs of SUNFLOOR

METALLIN in 2kgs of water. Light foot traffic may be

allowed after 24 hours etc. all complete as per the

satisfaction of the EIC Sq.m

OPTION 2: DRY SHAKE FLOOR HARDENERProviding and sprinkling synthetic, non metallic, high

abrasion resistant floor hardener over the concrete slabs

of pavements, parking lots, swimming pool decks etc.

While the base concrete is about to set and the bleeding

water appears on the surface, sprinkle POLYABRES of


over the bleeding water @3- 5 Kg per Sqm and finish

with trowel as per requirement. Allow to set for 24

hours and proceed with regular concrete curing

specification. Light foot traffic may be allowed after 24hours etc. all complete as per the satisfaction of the EIC Sq.m

24. HYGENIC COATING FOR WATER TANKS

Clean the existing cured internal surface of the water

tank so that it is free from loose particles, flakes and

ensure that the surface is dry & sound. Ensure to

provide necessary crack filling treatment if any on the

existing surface using epoxy mortar. Mix SUNEPOXY 378

of M/s. Sunanda Speciality Coatings Pvt. Ltd. or

equivalent (resin and hardener in the ratio of 1:0.5 byweight) and apply by roller on the clean and dry surface.

Allow to air cure for 24 hours and apply similar two

coats to achieve final finish. Rate includes erection of

scaffolding cleaning, treatment to existing cracks,

application and cleaning at all levels etc. complete to the

satisfaction of the EIC Sq.m


24/28

24



A N I S O 9 0 0 1 : 2 0 0 8 C O M P A N Y

F. ANTI-CORROSIVE TREATMENT TO STEEL

25. RUST REMOVAL AND CONVERSION FOR STEEL

Remove loose rust from the reinforcement bars by

mechanical means like wire brushing, chipping,hammering, etc. Using cotton waste swab apply

RUSTICIDE of M/s. Sunanda Speciality Coatings Pvt.

Ltd. or equivalent. The rusted surface will turn from

reddish brown to blackish non-rusted colour. After 24

hours remove the free / loose rust particles by simple

dusting with brush, etc. complete to the satisfaction of

the EIC. Payment will be made on the quantity of

RUSTICIDEconsumed.

Litres

26. RUST PASSIVATION OF STEEL

Prepare a lump free consistent slurry of 1 kg. of

POLYALK FIXOPRIME of M/s. Sunanda Speciality

Coatings Pvt. Ltd. or equivalent with 1.25 kg. of fresh

grey cement. Do not add any water. Apply the above

slurry to the derusted steel surface by a paint brush.

Allow this coat to set for 24 hours & then apply a similar

second coat etc. complete to the satisfaction of the EIC.

Prepare as much slurry as can be applied within 30minutes. Payment will be made on the quantity of

POLYALK FIXOPRIMEused.

Litres

27. CORROSION PROTECTION TO STEEL WITH SACRIFICAL ANODE - SUNANODE

Providing and fixing in position zinc based sacrificial

anode- SUNANODE of M/s. Sunanda Speciality Coatings

Pvt. Ltd over the cleaned steel surface. Fixing to be done

using anode connectors or tack welding to steel surface.The rate includes cleaning, applying, fixing in position,

welding at all heights etc. complete to the satisfaction of

the EIC.

Nos


25/28

25



A N I S O 9 0 0 1 : 2 0 0 8 C O M P A N Y

28. INTEGRAL CORROSION INHIBITING ADMIXTURE FOR RCC MEMBERS

Providing and laying R.C.C. of designed grade at all

heights and levels on well compacted/sound surfaces

using a mechanical mixer including dewatering,shuttering, vibrating, curing and finishing as required.

Admix integral corrosion inhibitor POLYALK CP293 of


@ 1% by weight of cement. The rate to include for

storage, handling, transportation of materials,

equipments etc using appropriate methods etc.

complete.

Cu.m

29. PU COATING FOR PROTECTION TO STRUCTURAL STEEL/ RAILINGS/ GRILLS

Clean the existing steel surface by scrubbing so as toremove al the existing loose rust etc. Using cotton waste

swab apply RUSTICIDE of M/s. Sunanda Speciality

Coatings Pvt. Ltd. or equivalent. After 24 hours remove

the free / loose rust particles by simple dusting with

brush, etc. complete to the satisfaction of the EIC.

Providing and applying three coats of protective coating

of SUN PUGARD of M/s. Sunanda Speciality Coatings

Pvt. Ltd over the cleaned steel surface. Mix 4 parts of

Part-A to 1 part of Part-B using mechanical stirrer to

form uniform consistency. Apply the three coats bybrush or spray at 4-6 hours interval between each coat.

to the satisfaction of the EIC. Sq. m


26/28

26



A N I S O 9 0 0 1 : 2 0 0 8 C O M P A N Y

G. ANCHORING OF DOWEL BARS

30. ANCHORING DOWEL BARS IN RCC MEMBERS USING EPOXY GROUTS

Drilling holes in the existing RCC surface beams,

columns, slabs for inserting dowel rods of stipulatedsize. Mixing and placing SUNEPOXY 358of M/s. Sunanda

Speciality Coatings Pvt. Ltd. or equivalent in the ratio ( 1

part Resin and 0.5 part Hardener) and pouring with

appropriate tools in the clean drilled hole. Ensure

surface is dry and free from moisture. Insert the dowel

rod in position and leave un-disturbed for next 24 hours.

If necessary give the packing to it. Further work to

proceed after 3 days of setting time. Rate to include

drilling, cleaning, placing epoxy, setting etc. all complete

as per the satisfaction of the EIC Payment will be madeon the quantity of SUNEPOXY 358 consumed Liters

31 ROCK ANCHORING

Clean the drilled hole on the rock surface and remove

dust, loose particles, etc using electric blowers or

suction device. Apply bonding coat of POLYALK EP of


to the entire surface. Provide rod in place and pour highstrength POLYCRETE-A of M/s. Sunanda Speciality

Coatings Pvt. Ltd in the hole. POLYCRETE-A is prepared

by adding 12.5- 13% water by weight of POLYCRETE-A

and mixing it using mechanical stirrer to form flowable

consistency, curing etc complete to the satisfaction of

the EIC. Nos


27/28

27



A N I S O 9 0 0 1 : 2 0 0 8 C O M P A N Y

H. CURING COMPOUNDS

32. CURING COMPOUNDS

A Clean the existing RCC and plaster surface by scrubbing

so as to remove all the existing, dust, dirt, grime, oil etc

and washing the surface clean with jet of water etc.


B Providing and applying one pack curing compound

SUNPOLICUREof M/s. Sunanda Speciality Coatings Pvt.

Ltd. or equivalent on the entire surface using a curing

pump. Moisten the surface before the application and

saturate the substrate. Immediately while the surface is

damp spray SUNPOLICURE to form a uniform film overthe entire surface. The rate to include for application of

the same at all heights and levels etc. all complete as per

the satisfaction of the EIC Sq.m


28/28


A N I S O 9 0 0 1 : 2 0 0 8 C O M P A N Y

I.EPOXY FLOORING

33 EPOXY FLOORING

Clean the existing RCC and plaster surface by scrubbing

so as to remove all the existing, dust, dirt, grime, etc.


Providing and applying SUNEPOXY 378of M/s.

Sunanda Speciality Coatings Pvt. Ltd. or equivalent and

apply by roller on the clean and dry RCC surface.

33a 1mm Self Leveling Epoxy flooring Sq.m

33b 2mm Self Leveling Epoxy flooring Sq.m

33c 3mm Epoxy Screed + Self Leveling Epoxy flooring Sq.m

sunanda's latest bill of quantities water proofing

Documents