stop the shock with w-technologies hydraulic shock dampers
DESCRIPTION
Learn about the benefits of hydraulic shock dampers for blanking, punching or die trimming.TRANSCRIPT
Stop the SHOCKW-Technologies Hydraulic Shock Dampers
Who Needs Shock Dampers?
Anyone Blanking, Punching or Die Trimming
Why do You Need Shock Dampers?
To Reverse the Shocks of Presses
To Prevent Premature Die Wear
To Reduce Mechanical Failures
To Extend Press Life Three to Five Times Longer
That’s Right It Can BeThree to Five Times Longer
cWhat Are Hydraulic Shock
Dampers?
• A simple hydraulic cylinder with external pressure adjustment.
• Each component working seamlessly together to give every press a smoother and longer life.
c
A Powerful Tool that– Reverses Break Through Shock– Absorbs Shocks Without Derating
Presses
What Are Hydraulic Shock Dampers?
Reversing The LoadSee How Shock Dampers can Reverse the Load and
Save the Machine from shocks
Are They Easy To Install?
“It’s no more difficult than setting up tooling inside a press”
cIs the Pressure Easy to Adjust?
As Easy as Turning an Allen Wrench
What are the advantages of external adjustment control?– You can adjust tonnage capacity with each cylinder
externally– Cylinders can be adjusted quickly to fit any new
tonnage requirements on existing or different presses
What To Expect After Installation• Dramatic Reduction in Noise• Reduced Mechanical and Hydraulic Press
Failures• Improved Operator’s Ergonomics• Presses Can Be Off Center Loaded• Can increase Blanking Capacity to 95% of Press
Capacity• Increased Production Speed
W-Technologies Guarantee
We back our products with 100% satisfaction guarantee. If the hydraulic dampers do not meet customer satisfaction, all financial obligation is
cancelled and returned.
Contact W-Technologies Today
Phone: 618-263-4385Fax: 618-262-8934
[email protected] Market Street Ste 206
Mt. Carmel, IL 62863http://www.w-tech.biz