southeast 01 2014

PortMiami Makes Way for

Economic Growth…8

NCM Demos Old Office

Building…18

May Equipment Partners With

NSTH…12

Inside

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

® SoutheastEdition

$3.00

January 8, 2014 • Vol. XXV • No.1 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910

www.constructionequipmentguide.comPublished Nationally

By Cindy RileyCEG CORRESPONDENT

Described as playing a key role in the revi-talization of the downtown area, the newSumter County Judicial Center in Sumter,S.C., is a source of pride for those it serves. Ina period of 21 months, construction crews

transformed a parking lot into a civic land-mark that will serve generations to come.“The Sumter County Judicial Center is

located in the heart of our downtown district,”said Sumter County clerk of court James C.Campbell. “We’re diagonally behind the his-toric courthouse, which has served this com-

Judicial Center Plays KeyRole Revitalizing Sumter

The Equipment Leasing and FinanceAssociation’s (ELFA) Monthly Leasing andFinance Index (MLFI-25), which reports economicactivity from 25 companies representing a crosssection of the $827 billion equipment finance sec-tor, showed its overall new business volume forNovember was $6.6 billion, up 3 percent from newbusiness volume in November 2012. Month-over-month, new business volume was down 13 percentfrom October. Year to date, cumulative new busi-ness volume increased 5 percent compared to 2012.Receivables over 30 days were at 1.8 percent in

November, up slightly from 1.5 percent in October.Delinquencies declined from 2 percent in the sameperiod in 2012. Charge-offs declined to once againmatch the all-time low of 0.3 percent from 0.4 per-cent the previous month.Credit approvals totaled 76.5 percent in

November, a slight decrease from 77.6 percent theprevious month. Forty-seven percent of participat-ing organizations reported submitting more transac-tions for approval during October, a level more inline with previous months’ activity after a spike to82 percent last month.Finally, total headcount for equipment finance

companies was up 1.4 percent year over year.Separately, the Equipment Leasing & Finance

Foundation’s Monthly Confidence Index (MCI-

ELFA’s MLFI-25Reports NewBusiness Volume

By Lori TobiasCEG CORRESPONDENT

Thirty-nine states posted gainsin construction jobs over the pastyear, but analysts say the industryremains fragile.“We think the market is soft,”

said Brian Turmail, spokesman of

The Associated GeneralContractors of America. “Privatesector demand is getting weakand employment gains can befleeting.”That concern was underscored

by Mississippi, which led thecountry with a 17-percentincrease, or 8,000 jobs, over

2012. Nonetheless, the southernstate lost more than 2 percent —1,300 — of those jobs fromOctober to November, placing itat 49th out 50 states for growth.Conversely, Indiana led the

monthly rankings with a 4.8 per-cent increase — 5,400 construc-tion jobs — but saw a 3.4 percent

decline or about 4,100 jobs overlast year. California added 31, 500 jobs

for an increase of 5.2 percent. Buteven that is a mixed picture.

“They top the list in total jobsadded,” Turmail said. “But it’s atale of two markets. In coastal

Industry Remains Fragile Despite Job Gains

see JOBS page 56

see SURVEY page 60see SUMTER page 32

Luke Lukens of Sumter County, S.C. photoCrews pump cement into the building tower at the Sumter County Judicial Center inSumter, S.C. jobsite.

Table of Contents ................4

Truck & Trailer Section ..............................................35-38

Recycling Section ........39-49

Attachment & Parts Section......................................51-54

Auction Section............70-77

Business Calendar ............71

Advertisers Index ..............78

• January 8, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Corporate704-494-8100

Asheville828-687-0620

Greenville252-754-5280

Columbia803-791-0740

North Charleston843-414-1120

TENNESSEEKnoxville

865-525-1845Chattanooga423-308-7940

GEORGIASavannah

912-964-8079

NORTH CAROLINA SOUTH CAROLINA

Call ASC Construction Equipment for Doosan Portable Power Sales, Service, Parts or Rentals.

Portable Power

WWW.ASCVOLVO.COM

Charlotte704-596-8283

Raleigh919-661-8710

Piedmont864-704-1060

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 8, 2014 •

Volvo Construction Equipment

USED EQUIPMENT

North Dakota: Bismarck

FargoMinot

North Carolina: CharlotteRaleigh

AshevilleGreenville

South Carolina: Columbia

North CharlestonPiedmont

Georgia: Buford

Forest ParkSavannah

Tennessee: Knoxville

Chattanooga

Your VOLVO dealer inThe Carolinas • Georgia • East Tennessee • North Dakota

www.ascvolvo.com

(5) 2010 Volvo A40E, 1514-2709 hrs,$390,000 - $395,000

(2) 2007 Volvo T450D, 1530-1632 hrs,$225,000 Ea.

2011 Volvo EW180C, 1677 hrs, $155,000

2012 Volvo L90G, 2549 hrs, $170,000

2011 Volvo L150G, 1937 hrs, $280,000

(2) 2012 Volvo A40F, 1580-1730 hrs,$440,000-$460,000

2011 Volvo EC380D, 1806 hrs, $265,000

(2) 2009 Volvo G930, 2663-3623 hrs,$120,000 Ea.

(3) 2011 Volvo L110F, 3055-5034 hrs,$145,000-$180,000

Doug Wilson 704-562-2032 Email: [email protected]

Billy Brice 678-318-9500Email: [email protected]

ASC has the largest supply of Tier 3 Articulated Trucks in inventory, call for more details.

2006 Volvo EC160B LC, 1900 Hrs, $80,000Asphalt/Pavers/ConcreteEquipment2006 VOLVO PF6110, 2866 Hrs ......................$185,000

(2) 2007 VOLVO PF6110, 2809-3061 Hrs ......$160,000 Ea.

2008 VOLVO PF6110, 3258 Hrs ......................$185,000

2007 VOLVO PF6170, 1451 Hrs ......................$230,000

Compactors-Smooth Drum2010 VOLVO DD112HF, 1664 Hrs......................$85,000

2008 VOLVO DD118HF, 1874 Hrs......................$90,000

Excavators-Crawler2011 VOLVO EC210CL, 1931 Hrs ....................$145,000

2007 VOLVO EC210CL, 2529 Hrs ......................$90,000

2008 VOLVO EC210C LC, 2588 Hrs ..................$115,000

2011 VOLVO EC240C LC, 2759 Hrs ..................$160,000

2008 VOLVO EC240CL, 6361 Hrs ......................$90,000

2011 VOLVO EC250DL, 2277 Hrs ....................$200,000

2012 VOLVO EC300DL, 1820 Hrs ....................$225,000

(2) 2011 VOLVO EC340DL, 3041-3815 Hrs ....................

................................................$230,000-$235,000

(7) 2012 VOLVO EC340DL, 1573-3432 Hrs ....................

................................................$260,000-$270,000

2011 VOLVO EC380D, 2119 Hrs......................$265,000

2011 VOLVO EC460C LC, 3903 Hrs ..................$280,000

2011 VOLVO EC480DL, 3380 Hrs ....................$340,000

2013 KOMATSU PC350 LC-8, 1967 Hrs ............$250,000

Excavators-Wheel(2) 2011 VOLVO EW180C, 2041-2580 Hrs ....$155,000 Ea.

Motor Graders(2) 2009 VOLVO G930, 2716-3823 Hrs ........$120,000 Ea.

(2) 2010 VOLVO G930, 3226-3313 Hrs ........$150,000 Ea.

2011 VOLVO G946B, 1957 Hrs ......................$240,000

Off-Highway Trucks2004 VOLVO A25D, 5609 Hrs ........................$190,000

2010 VOLVO A25F, 1727 Hrs ........................$285,000

(6) 2012 VOLVO A25F, 1590-2222 Hrs..$300,000-$310,000

(5) 2006 VOLVO A30D, 4710-10800 Hrs$105,000-$210,000

(2) 2008 VOLVO A30E,7188-7614 Hrs..........$175,000 Ea.

2011 VOLVO A30E, 3078 Hrs ........................$310,000

(2) 2008,VOLVO,A35E,3849-5086 Hrs..$255,000-$265,000

(5) 2010 VOLVO A40E, 1972-4850 Hrs $350,000-$390,000

(4) 2011 VOLVO A40E, 3730-4450 Hrs $350,000-$385,000

2009 VOLVO A40F, 2333 Hrs ........................$440,000

(10) 2011 VOLVO A40F, 1551-6374 ....$345,000-$480,000

(8) 2012 VOLVO A40F, 1815-3136 Hrs..$440,000-$480,000

2013 VOLVO A40F, 1718 Hrs ........................$500,000

Sweepers / Broom Equipment2010 BROCE MK I, 536 Hrs ............................$93,750

Wheel Loaders2010 VOLVO L50F, 7623 Hrs ..........................$58,000

(2) 2011 VOLVO L50F, 6148-6185 Hrs ..........$65,000 Ea.

(3) 2012 VOLVO L70G, 2155-3182 Hrs $148,000-$160,000

2006 VOLVO L90E, 16653 Hrs ........................$58,000

(2) 2012 VOLVO L90G, 2523-2736 Hrs $170,000-$198,000

2010 VOLVO L110F, 5170 Hrs ........................$145,000

(3) 2011 VOLVO L110F, 3634-5474 Hrs $160,000-$180,000

(2) 2012 VOLVO L110G, 2221-2576 Hrs$225,000-$230,000

2009 VOLVO L120F, 6870 Hrs ........................$165,000

2013 VOLVO L120F, 5497 Hrs ........................$175,000

2011 VOLVO L120F, 5316, Hrs ......................$185,000

2009 VOLVO L150F, 5726 Hrs ........................$205,000

(2) 2010 VOLVO L150F, 9463-11462 Hrs ......................

................................................$140,000-$160,000

(4) 2011 VOLVO L150G, 1881-3329 Hrs$260,000-$280,000

2010 VOLVO L180F, 3187 Hrs ........................$265,000

2012 VOLVO L180G, 2551 Hrs ......................$325,000

2012 VOLVO L250G, 1642 Hrs ......................$480,000

2011 VOLVO L350F, 1820 Hrs ........................$685,000


SOUTHEAST EDITIONCirculated Throughout • Alabama • Arkansas • Florida • Georgia • Louisiana

• Mississippi • North Carolina • South Carolina • Tennessee • Virginia • Puerto Rico • Virgin Islands

Founder, Publisher & CEO Edwin M. McKeon Sr.Southeast Publisher Richard C. McKeon

Editor In Chief Craig Mongeau Associate Editor Christine Reckner

Editorial Consultant Pete Sigmund Production Mgr. John Pinkerton

Controller Tom WeinmannCirculation Mgr. Cathy Printz

Main office 470 Maryland Drive Fort Washington, PA 19034

215/885-2900Toll Free 800/523-2200

Fax 215/885-2910

Web site www.constructionequipmentguide.comEditorial e-mail [email protected]

Advertising e-mail [email protected]

For advertising rates Contact Richard C. McKeon• North & South Carolina • Tennessee •Virginia

704/553-8888Toll Free 800/288-4234

Fax 704/553-8899e-mail [email protected]

Contact Rich Olivier• Alabama • Arkansas • Georgia •Mississippi • Tennessee • Florida Panhandle

770/443-3174Toll Free 800/409-1479


Contact Jim Van Natta• Florida • Virgin Islands • Puerto Rico

407/365-5720Toll Free 800/344-3026


Contact Dale Agnew•Louisiana

Toll Free 877/877-4997 Fax 972/719-2611

e-mail [email protected]

Construction Equipment Guide Southeast Edition is published bi-weekly by Construction Equipment Guide Ltd.Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send addresschanges to Construction Equipment Guide Southeast Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Contents Copyrighted ©2014, by Construction Equipment Guide, which is a Registered Trademark, registered in theU.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced(including framing) in whole or part without written permission from the publisher. All editorial material, photo-graphs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyrightpurposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially.Contributor articles do not necessarily reflect the policy or opinions of this publication.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is notresponsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used inadvertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occa-sionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any adver-tising.

IN THIS ISSUESPECIAL SECTION…RECYCLING, CRUSHING AND SCREENINGBe sure to check out this special section! Keep up to date with the latest information on recycling, crushing and screening.

FEATURES…CREWS DREDGE UP ECONOMY WHILE DEEPENING PORTMIAMISituated in the Biscayne Bay and home to many protected, threatened andendangered species, PortMiami is undergoing a major dredging that’sexpected to create 33,000 new jobs, double cargo throughput and increaseits annual economic impact to more than $34 billion.

MAY EQUIPMENT LOOKS TO FUTURE, EXPANDSWITH VSTHMay Heavy Equipment currently stocks more than 150 machines consistingof every type of “earth moving” equipment imaginable.

NCM STAYS AHEAD OF SCHEDULE FOR OFFICEBUILDING DEMONCM Group of Charlotte, N.C., is nearly finished the demolition of theoffice building in the SouthPark section of the city. According to JosephDelahunty, operations manager, work began in mid-July on the formerMaersk Shipping building, and will be completed shortly.

OFFICIALS CONSIDER RESTORING 27-MILE N.C.RAILROAD LINEThe StarNews of Wilmington reported that officials are considering if itwould be worth the investment to restore a 27-mi. (43 km) line betweennorthern New Hanover County and southern Duplin County.

REPLACEMENT OF SABINE RIVER SPAN SET FOR JANUARYA project two decades in the making will mark its next milestone whenconstruction begins in January on new U.S. Highway 84 bridges overSabine River.

BELOVED LEADER OF J.M. WOOD PASSES AWAY ATAGE 65J.M. Wood Auction Co. Inc. — a 40-year-old Montgomery, Ala., fixturethat’s now among the largest auction firms in the country — lost itsbeloved leader, Brenda Wood, on Dec. 22.

RIDENOUR SET TO RETIRE FROM LIUGONG NORTH AMERICALiuGong announced Fred Ridenour’s retirement from LiuGong NorthAmerica on Dec. 31, 2013. Ridenour has represented multiple manufacturers during his career before LiuGong North America.

20

20

60

64

18

12

8

39

68 CLASSIFIEDS70 COMING AUCTIONS71 BUSINESS CALENDAR

EQUIPMENT…24 BOBCAT Tier IV Loaders38 TALBERT Hydraulic Gooseneck Trailer

12

39

18

8

60

®Mobile LinkedIn Facebook Twitter YouTube

To read these s tories and many more, vis it w w w .construct ionequipmentguide.com

Ft. Myers, FL239-337-1313

Jacksonville, FL904-786-6710

Ocala, FL352-629-7585

Orlando, FL407-849-6560

Pembroke Pines, FL954-433-2800

Plant City, FL813-754-2727

West Palm Beach, FL561-863-0570

Ashville, NC828-681-5172

Charlotte, NC704-376-7554

Greenville, NC252-695-6200

High Point, NC336-665-0110

Raleigh, NC919-851-2030

Wilmington, NC910-254-2031

Columbia, SC803-794-6150

Greer, SC864-877-8962

N. Charleston, SC843-552-0095

Need a machine for a week?

A month?

Check out Linder’s

brand-new rental fleet

“The most important thing we bring to the table for

rental customers is the certainty that they’ll get a high-

quality, brand-name, low-hour machine at a competi-

tive price,” said Ronnie Sims, General Manager of

Komatsu Rents. “When they rent from one of the large

rental houses, they’ll get you whatever that store has

in stock at the time, which may well be an off-brand.

At Komatsu Rents, we rent Komatsus, period. So

customers know they’re getting an efficient,

productive, reliable machine each and every time.”

“We inspect each machine thoroughly after it comes in

and before it goes out,” Sims pointed out. “We

address any problems and take care of any services

that are due. If one of our units needs repair on the

job, and our certified technicians can’t take care of it in

a timely manner, we’ll bring the customer a replace-

ment machine.”

To rent a machine or to get pricing information, call

Komatsu Rents toll-free at 866-559-2878, or call your

nearest Linder branch location.

Ronnie Sims is the General Manager of Komatsu Rents, Linder’s new rental division,

which features an all-new earthmoving fleet.



606 S. R. 16 East, Green Cove Springs, FL 32043

904-284-9670 Fax: 904-358-8706Call Neil Corrado: 888-370-9336 or 904-284-9670 • Cell: 904-571-9270 • Email: [email protected]

MOBRO MARINE, INC.

FOR SALEKobelco CK 2750G - 150’ Main Boom, Free Fall, Block & Ball, 2 Drums, 275 Ton Capacity, Call for Price

We Sell & Rent Cranes,Barges & Tugs


HOT USED / RENTAL FLEET SPECIALS2006 John Deere 750J LGP Dozer, Cab Six Way Blade 7412 hours unit#1184 ............................................................................................$69,0002004 CAT 320CL Excavator, 32” pads, Thumb, 42” bucket 6600 hours unit#209 ........................................................................................$74,5002005 John Deere 600LC Excavator, 2 bkts., 13’6” stick, 9127 hours unit#2140..........................................................................................$99,0002005 CAT 930G Loader, Cab, Bucket & Forks, 5800 hours unit#561............................................................................................................$69,0002007 Sakai SV400TF 66” Pad Foot Roller, with Shell Kit, OROPS unit#8024..............................................................................................$59,000

Call Will Blackerby 336-357-5005

www.mayequip.comColumbia, SC (803) 409-0460

www.mayequip.comLexington, NC (866) 629-3784

> > >

DEALER IMPRINT AREA

VISIT US AT

EXHIBIT #40042

AN E.P.I.C. GENERATIONEFFICIENT. POWERFUL. INTELLIGENT. COMFORTABLE.

DEALER IMPRINT AREA

DEALER IMPRINT AREA

www.mayequip.com

Lexington, NC(866) 629-3784

Columbia, SC(803) 409-0460

May Heavy EquipmentYour Authorized Distributor

Ask about 0% Financing

RENTALS • SALES • PARTS • SERVICEHYUNDAI

Reliability backedby the best industrywarranty, Hyundai,Moving You Further.Choose Hyundai for your next job.

SAKAI

With Sakai high-frequency rollers you can speed compaction and be sure you’re rolling at the preciseimpact spacing at the fastest possible ground speed.

Put Sakai to work on your next job.

www.sakaiamerica.com

TEREX

Terex Arctic Trucks Powerful & ProductiveTerex Gen 9 trucks are built for productive hauling,

with body capacities that are matched to their outstanding power and braking abilities. Terex Gen 9 trucks are a powerful and productive choice for any job site.


Crews Dredge Up Economy While Deepening PortMiamiPortMiami photo

Work is currently underway in the area highlighted in yellow.

PortMiami photoPortMiami is undergoing a major dredging that’sexpected to create 33,000 new jobs, double cargothroughput and increase its annual economic impactto more than $34 billion.

By Cindy RileyCEG CORRESPONDENT

Situated in the Biscayne Bay and home to many protect-ed, threatened and endangered species, PortMiami is under-going a major dredging that’s expected to create 33,000 newjobs, double cargo throughput and increase its annual eco-nomic impact to more than $34 billion. The U.S. ArmyCorps of Engineers (USACE) is overseeing the dramaticundertaking, which should be completed in the next 18months.“With a project of this magnitude, there are many chal-

lenges and components to balance, including environmentalmonitoring, safety and the loosening and removal of rock,which requires specialty equipment that is rare, expensiveand requires specialized expertise to operate and maintain,”said Laurel Reichold, project manager of USACE. “MiamiHarbor is a very active port, and poses many logistical chal-lenges of accomplishing the job without disruption of serv-ice. PortMiami will be one of only three U.S. Atlantic ports to

be at 50 ft. (15.2 m) when the expanded Panama Canal opensin 2015. The deeper depth means PortMiami can accommo-date larger Post-Panamax vessels. As the closest U.S. port toPanama, PortMiami also expects to benefit from increasedAsian trade. The channel widening features are necessary tomaintain safe navigation. “This project has several widening components that are

needed to counter balance hydrodynamic forces that posenavigational safety risks to existing port traffic,” saidReichold. “Congressionally authorized channel deepening iseconomically driven by the method and the cost of deliver-ing goods and services to the nation. With the ongoingexpansion of the Panama Canal, high opportunity costs andeconomic efficiencies of larger cargo and container shipsbeing able to carry more goods faster through the canal now

exists. “In order for the larger ships to call on U.S. East Coast

ports, the port channels need to be sufficiently deep,” saidReichold. “This deepening project was specifically author-ized to accommodate this growth and trend of larger shipsdelivering goods and services to the nation.”Dredging to deepen the Port’s main harbor channel began

in late November 2013. Great Lakes Dredge and DockCompany LLC, the selected contractor for the project, beganmobilizing its dredging equipment that same month, includ-ing the hopper dredge, Terrapin Island, which has com-menced dredging operations in the Port’s outer channel.Mayor Carlos Gimenez called the start-up a “major mile-

stone” for all of Florida that will benefit from increased tradeopportunities once the expanded Panama Canal opens.“PortMiami will be the closest U.S. port to the Panama

Canal able to accommodate the mega size cargo vessels thatrequire a 50 foot depth when at full capacity,” Gimenez said.“New trade opportunities translate into new jobs. The DeepDredge will create thousands of permanent and well-payingjobs throughout the region.”PortMiami director Bill Johnson credited Florida Gov.

Rick Scott and the state legislature for moving the DeepDredge Project forward. The state is contributing $112 mil-lion to funding the $220 million project, and Miami-DadeCounty’s share totals $108 million.“PortMiami will be big ship ready when the expanded

Panama Canal opens in less than two years,” Johnson said.“The importance of the dredging project cannot be overstat-ed.”Johnson said this is the first time that non-federal dollars

are funding a U.S. Army Corps of Engineers project.“We are grateful to the vision of our state and local lead-

ers in moving this critical infrastructure improvement projectforward,” Johnson said. “The investment in the deep dredgewill pay dividends in years to come, making Florida an even

more powerful player in the global marketplace.”In addition to the significant economic impact, Johnson

said the dredging project would follow the highest environ-mental standards.

The project includes the restoration of more than 16 acresof seagrass in Biscayne Bay and the creation of nine acres ofartificial reef. In order to minimize impact on existingresources, the Port’s mitigation measures include the reloca-tion of hard coral colonies. Additionally, divers will be onsite to monitor natural resources for turbidity and sedimenta-tion effects before and during all dredging activities.The excavation will result in the removal of approximate-

ly 2.1 million cu. yds. (1.6 million cu m) of material.Materials that are not used to create the environmental miti-gation sites will be transported to the ocean dredged materi-al disposal site.The project was authorized by Congress in 1990 and ini-

tially involved deepening the Miami Harbor entrance chan-nel from 38 to 44 ft. (11.6 to 13.4 m) and the inner harborfrom 36 to 42 ft. (11 to 12.8 m). The current deepening wasauthorized by Congress in the Water ResourcesDevelopment Act of 2007 and involves deepening the outerfederal channel to 52 ft. (15.8 m) and the inner channel to 50ft. (15.2 m). Work on the latest dredging was delayed byabout two months, giving officials time to complete envi-ronmental resource surveys and other paperwork. “All tasks of this project are crucial from environmental

monitoring to dredging, to ensuring top-notch safety proto-cols are in place,” said Reichold. “The loosening andremoval of rock is an example of a crucial task to be per-formed. The rock will be cut down to size and then it will besuctioned off of the bottom and placed into barges. It willthen be taken to the ocean disposal area, where the bargeswill open and drop the rock in several hundred feet of water.This operation will require specialty equipment that is not

see PORTMIAMI page 72


IN FLORIDA,

GS EQUIPMENT IS YOUR

SOURCE FOR GRADALL VERSATILITY

See GS Equipment for Gradall parts, service and the world’s most versatile excavators, including ...

• Series IV models with automatic transmissions, making them easier than ever to drive to job sites at speeds up to 60 mph.

• On-off pavement wheeled excavators that can work at the front, back or either side without the need for outriggers.

All Gradall excavators feature the world-famous telescoping, full tilting Gradall boom that handles more work faster.

For a demo, contact any of these GS Equipment locations:

POMPANO BEACH ORLANDO954-327-8808 407-859-9160

TAMPA FT. MYERS813-248-4971 239-334-6063

For more information call Jay Stafford today! 813-210-2045

Tampa813-248-4971

Pompano Beach954-327-8808

Ft. Myers239-334-6063

Orlando407-859-9160

Jacksonville904-268-4400

Performance you can count onEquipment • Parts • Service • Rentals

www.gsequipment.comMaterial HandlingEquipment and attachmentsfor all your needs

Material HandlersNumber one brand in North America for recycling and scrap metalyards, barge and port operations, log handling, transfer stations andwaste facilities

• Variety - 45 models with operating weights from 48,000 - 265,000lb, rubber tired, crawler and pedestal versions

Model Horsepower Max. Working Radius Weight

Rubber Tired 142 - 426 HP 44’ - 66’11” 54,000 -165,400 lbTracked 142 - 640 HP 44’ - 85’ 51,000 - 265,000 lb

ShearsFor cutting metal and other scrap yard tasks

• Powerful - Best weight to power ratio in the industry• Large variety - Many sizes and mounting options,including full 360˚ rotation

Container LoadersMiTilt horizontal container loaders and container tilters

• Faster, more efficient loading - One tilter dispatches500 tons of scrap in an average day• Compact - Moves between stockpiles easily

Scrap & Demo MagnetsInexpensive to buy and run

• Easy to install• No gen set required• Operates off the machine’s 12 or 24 volt battery system• Sizes available in 26”, 32”, and 36”


YOU UNITE & CONQUER WITH INNOVATION.PEOPLE, POWER, PRODUCTIVITY.

Smart Works.

CORPORATE: 704-494-8100

Buford678-318-9500

Forest Park770-319-0074

Savannah912-964-8079

Asheville828-687-0620


Greenville252-754-5280

Raleigh919-661-8710

Charleston843-414-1120

Columbia803-791-0740

Piedmont864-704-1060

Chattanooga423-308-7940

Knoxville865-525-1845

Bismarck701-250-4882

Fargo701-271-2360

Minot701-250-4882

GEORGIA NORTH CAROLINA SOUTH CAROLINA TENNESSEE NORTH DAKOTA

ascvolvo.com

Volvo Construction Equipment


38297 Hwy. 30Gonzalez, LA 70737

225-450-6425

P.O. Box 417St. Rose, LA 70087

504-467-7663

3062 Hwy. 397 SouthLake Charles, LA

70615337-436-7726

Contact your sales representative to seehow we can make a difference for you.

Raleigh • Durham919-556-9110 • 877-469-3471

www.ccsequipment.com


May Equipment Looks to Future, Expands With VSTHBy Brenda Ruggiero CEG CORRESPONDENT

Founded in 1997 by Bert and Jacob Mayin Lexington, N.C., May Heavy Equipmentis a heavy equipment rental and sales com-pany in the Southeast. The company is proudto be an industry leader in equipment solu-tions, according to Richie Ambrose, vicepresident of new equipment sales.“We pride ourselves on being known for

our high level of service and response time,”said Ambrose. “As the company hasevolved, we have sought new and inventiveways to better serve our customers. It wasnot until a few years ago that we decided topartner up with several top OEMs to provideongoing support to our current customerbase, as well as grow the market share forthese manufacturers.”

Ambrose noted that one of May’s chosenbusiness focuses is new equipment sales. “We are an attractive company for OEMs

because we are established, have such alarge customer base, and offer a level ofindustry knowledge they can’t get anywhereelse,” Ambrose said. “In the past year, wehave become the authorized dealer in Northand South Carolina for Terex trucks,Hyundai, Kawasaki, LayMor, Magnum,Hydro-Ram and Sakai in South Carolina.We cover a vast territory that spans as farsouth as Florida, as far north as Washington,D.C., and as far west as Arkansas.”

May Partners With VSTH CapitalLLC for Expanded Growth

Another exciting change for the companyis the addition of an investment company.May partnered with VSTH Capital LLC inJuly to allow them the capital for newgrowth to meet increased constructiondemands, according to Chuck McGirt, MayHeavy Equipment COO. This partnership has allowed May Heavy

to upgrade its entire rental fleet, purchasingnearly 100 new pieces of equipment in thepast year. “Within the next nine months, we have a

very attainable goal for every vehicle in ourrental fleet to average only one to two yearsin age,” Ambrose said.“The announcement of this partnership

and recapitalization with VSTH Capital rep-resents a key milestone in our ongoingefforts to become the premier heavy equip-ment rental and sales company in theSoutheast,” said Jacob May, president ofMay Heavy Equipment. “It will allow us tomove faster, evaluate larger opportunities,and provide more certainty of long term suc-cess, while greatly improving our balancesheet as we prepare for significant growth.’’Kerry Vickar, president of VSTH Capital

is pleased with the partnership as well.

“We are impressed with May Heavy’sreputation in the industry and their steadfastcommitment to building what will be thenewest and most versatile rental fleet in itsgeography over the next 12 to 18 months,”Vickar said. “We are pleased that MayHeavy will be our partner, and we will pro-vide additional leadership and capital toassist the Company in executing its growthplan organically and through acquisitions.We think this transaction combines greatcapabilities at both of the firms.”

May Heavy Equipment Looking to the Future

New faces and promotions have becomekey components to May Heavy Equipment’scontinued success. Recently, Jesse Beasley

was hired as a product support manager tofacilitate the company’s OEM parts, serviceand warranty service. Will Blackerby waspromoted to vice president of fleet manage-ment.“Like many companies in the industry, we

have had to evaluate areas of our businessand become more efficient as a company,”Ambrose said. “We are 30 employees strongand are always looking for good people whowant to join a great team. We are currentlyhiring mechanics and sales staff for all loca-tions. We are also identifying new areas toestablish additional branch locations.”As for the future, the May Equipment phi-

losophy is a straight-forward one.“Simply put, we want to be the industry’s

first choice for construction equipment, and

we will continue to support the Southeast’sconstruction industry in every aspect of ourbusiness, whether sales, rentals or services.Providing a world class customer serviceexperience has and always will come first,”Ambrose said. “We can see ourselvesexpanding into some new markets asdemand arises, but more importantly, wewant customers to know we are still here andstronger than ever. We appreciate our loyalcustomers, and we look forward to expand-ing our customer base. The future of theindustry is bright, and we are certain the bestis yet to come.”

About May Heavy EquipmentMay Heavy Equipment currently stocks

more than 150 machines consisting of everytype of “earth moving” equipment imagina-ble. Its extensive inventory includes a varietyof specialty machines, such as long reachexcavators, hydraulic rock hammers, watertrucks, and many types of compactionequipment.May Heavy’s service capabilities include

major engine repair, rebuilding componentssuch as final drives and transmissions, andtrack repair, such as removal and installationof undercarriages, pin/bushing replacement,turning and lubrication. In addition, it alsocan rebuild idlers and re-shell rollers. May’smobile lube units are available to providepreventive maintenance and service to thefleet while in the field.For more information call 803/865-1002

or visit www.mayequip.com.(This story also can be found on

Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)CEG

The company is proud to be an industry leader in equipmentsolutions, according to Richie Ambrose, vice president of newequipment sales.

(L-R): Chuck McGirt, Ronnie Yeatts, Scott Hatley and Will Blackerby stand in frontof some of the equipment available at May Equipment in Lexington, S.C.

Founded in 1997 by Bert and Jacob May in Lexington, N.C.,May Heavy Equipment is a heavy equipment rental and salescompany in the Southeast.


Randy Barrett336-339-9960

[email protected]

Jeff Keilen704-622-2304

[email protected]

Jay Sellers252-202-9363

[email protected]

The SY215CLC is Sany's 20 metric ton excavator, comes standard with:• Tier III Cummins engine• Kawasaki Pumps• Auxiliary Hydraulics

• 3 Year/3000 hour full machine warranty

• Pattern control changer

For a FREE Demonstration Call:

Charlotte Office704-622-2304

Raleigh Office919-773-1424

Reidsville Office336-347-7681

Tar Heel Machinery

Visit us on the web at www.tarheelmachinery.com

2006 John Deere 700J LGP, 3086 hours - $94,975 2006 Cat D5G LGP Open Cab, 2733 hrs - $59,975 2005 Link Belt 330LX, 4363 hours, Choice of Buckets - $99,000

What is a SY215CLC?

We Want to buy your heavy equipment..We purchase all makes of excavators, wheel loaders, dozers, graders, backhoes, trailers, etc. Please call a member of our staff to make an appointment that best fits your busy schedule!!

Save 10-50% on New & Used Construction Parts and Deere and Case Agricultural Parts including Tillage

1996 Champion 720A, 5446 hours, Rear Ripper,Air Condition, Top Con Ready - $57,000

2005 Terex TA27G7, 5438 hours - $70,000 2003 Terex TA30G7, 4889 hours - $80,500 2005 Terex TA 30G7, 4206 hours - $109,975 2006 Terex TA30G7, 4597 hours - $112,000

Winter Rental Fleet ClearanceSOLDSOLD SOLDSOLD


The Worldwide Leader in Concrete Paving Technology

CONCRETE STREETS AND HIGHWAYS � AIRPORT RUNWAYS � CURB AND GUTTER � SIDEWALKSRECREATIONAL TRAILS � SAFETY BARRIER � BRIDGE PARAPET � BRIDGE DECKS � IRRIGATION CANALS

GOMACO CORPORATION IN IDA GROVE, IOWA, USA � THE WORLDWIDE LEADER IN CONCRETE PAVING TECHNOLOGY � 800-831-2320

[email protected] � www.gomaco.com

ARROW EQUIPMENTServing Western North Carolina

(800) 277-2080

CarolinaCat.com

BLANCHARD MACHINERYServing South Carolina

(800) 922-2790

BlanchardMachinery.com

GREGORY POOLEServing Eastern North Carolina

(800) 447-3112

GregoryPoole.com


(800) 277-2080CarolinaCat.com


(800) 922-2790BlanchardMachinery.com


(800) 447-3112GregoryPoole.com


MultiThe Use

e orcFForcUse Loadereed FFeed

oader

MultiThe -Use snopugickinp, rkhorsewo

wlofast, r fols riaatem -coyber ad lodfeerce fothe

pce singinadlol riaatem

e orcFForcUse Loadereed FFeed ther odangnliilm, ilsow, sno

le Whi. ginadlol riaatemst coas hyBoeeLe, amneyAth its y

ct udropeyAththe gasinrchup

- drounrowind

ay muoyreatlygas

-100 2inct .

cap

w

oader

LFF0030s inmmCuPH031 oTurb

riveDc istatrodyHatFlwith ift LCo

Engiesel Do

at

0 50000 9to'5ginavP

PH73el Traver dUnroElect

Wid" 66dStan

rtessteaMMath aPPaemSystScreed egend L'9

0mfrowidthg -ackPt lenSiatz HP

002o tpuspeeds ginavP& el tCuer gAuer - ffs o

tronCogrinSteestick yoJic nroeasArginavPr tehTigr Foth WidnCogOperatinc liraudyHard

FPM

ltroeas

lstron

atoFlwith ift Lr oeyvnCoatoFlrdaobldoM

r odarobldMoeredTaple iabVar v RedandeeSp

at

er guAse orputipMuldanFeeder le ersibv oeyvnCo

dStannTo50,021

ro

nCogOperatinc liraudyHardacityCaper ppoH

s bL0

lstron


(800) 277-2080

CarolinaCat.com


(800) 922-2790

BlanchardMachinery.com


(800) 447-3112

GregoryPoole.com



NCM Stays Ahead of Schedule for Office Building Demo

NCM Group of Charlotte, N.C., is nearly finished the demolition ofan office building in the SouthPark section of the city.

Machines used include Hitachi and a newly purchased Komatsu PC490 excavator with a Genesisattachment.

Sam Ortiz, project superintendent of NCM stands on the job site.

NCM’s contract entails the demolition of the 300,000 sq. ft. (27,870.9 sq m) office structure, which hasbeen empty since 2009.

By Brenda RuggieroCEG CORRESPONDENT

NCM Group of Charlotte, N.C., is nearly finished the demolition ofthe office building in the SouthPark section of the city. According to Joseph Delahunty, operations manager, work began in

mid-July on the former Maersk Shipping building, and will be com-pleted shortly. The demolition will make room for a new 350-unit apart-ment project. “The project is actually ahead of schedule by about two weeks,”

Delahunty said. “We were asked to go out of sequence to accommodatea new apartment building going up. It was more difficult to completethis way, but we were able to do it, and it accelerated their schedule by1-1/2 months.”NCM is the demolition contractor, while JLB Partners is the general

contractor, under the direction of Bryan Walker.NCM’s contract entails the demolition of the 300,000 sq. ft. (27,870.9

sq m) office structure, which has been empty since 2009. “The interior drywall and ceilings were removed via Bobcats and

hand work,” Delahunty said. “We worked to segregate the recyclablematerial in the building. We had excavators equipped with shears, grap-ples, and buckets to demolish the building and below grade structures.”Other machines used include Hitachi and a newly purchased

Komatsu PC490 excavator with a Genesis attachment.The number of people working on the job fluctuated between five

and 20 throughout the timeline of the job.Construction debris was disposed of in a landfill, concrete was taken

to recycling yards and steel and non-ferrous metal was taken for reuse.A total of 90 loads of construction debris were removed, as well as 1,600truckloads of concrete.“The biggest challenge on the job site was demolishing the structure

out of sequence to allow the GC to construct a below grade parkingstructure where part of the building once stood,” Delahunty said. “Thismeant demolishing next to a 25-foot drop for the remainder of the proj-ect while other contractors were working constructing the new parkinggarage while we maintained a safe work site. Plans were set in place andexecuted to allow the work to take place safely without incident.”

(This story also can be found on Construction Equipment Guide’s Website at www.constructionequipmentguide.com.) CEG


757-545-3600 2506 South Military Highway • Chesapeake, VA 23320

Bryan Smith & Tom Coyne: Sales • Ryan Mellott: Sales & PartsBrian Evans: Rentals

See our website www.secva.net

1997 Cat 320BL, EROPS w/Heat andA/C, Progressive Hydraulic Thumb,Quick Coupler, Like New Undercarriage,Very Well Maintained, Excellent 48” Bkt,Oroginal Paint $51,500

2004 Komatsu PC220LC-7, EROPSw/Heat and Air, original paint, tightgood running machine $69,500

2005 Linkbelt 160LX, enclosed cabwith heat & AC. Hydraulic thumb.Clean, straight, tight, well maintained,low hour, one owner machine in verygood condition $69,500

2005 JD 200C LC, Enclosed cab withheat & AC. One owner well maintainedexcavator in good repair with new railsand sprocket $64,500

2007 JCB 3CX-14, OROPS, 4X4,very tight, Clean and nice$35,500

2011 Cat D5KXL, Open Canopy, AllHydraulic 6-Way Blade, System OneUndercarriage, Low Hours, In Like NewCondition $89,500

2004 Cat 247B OROPS, Good Tracks,Newer Rollers, Runs Out Very Nice$19,500

2007 Komatsu WA320-5, EROPS withheat and A/C, Clean, Tight and Original.Center joint is tight, all pins are tight.The machine is job ready $79,500

2004 Cat D6RLGP, Enclosed cab withcold AC. Straight blade with hyd tilt.Differential steering. Clean $99,500

2006 Komatsu PC200LC-8, EnclosedCab w/AC, 32” Pads, 42” Esco Bkt,Geith Manual Thumb $69,500

2007 Cat 320DL, EROPS with Heat &A/C, Wide Tracks, CAT Thumb$127,500

1996 Cat 312, Cab w/AC & Heat,Mechanical Thumb, Good Undercarriage,Tight Turntable, Tight Boom & Stick,Good Clean Original Machine $34,500

2004 JD 135C RTS, Enclosed Cab w/AC, Geith Bucket, Backfill blade, RunsGreat, Well Maintained $72,500

2004 JD 330C LC, EROPS with heatand A/C, great undercarriage, tightclean and original machine $57,500

3144 Hwy 74 EastMonroe, NC 28112

www.brookssales.com

HoursMon.-Fri. 7:30am-5:00pmSat. 8am-12pm

BROOKS SALES FOR CASE SERVICE & SALES

Call Jimmy for Service & Brian for Parts.

704-233-4242 800-443-7569

The Best Parts & Technicians for your Case Skid Steer Loaders & CTL Track Machinesare at Brooks Sales. They are waiting for you.

Mon.-Fri. 7:30am-5:30pmSaturday 8:00am-12:00pm

Call Jimmy for Service & Brian for Parts.

704-233-4242800-443-7569

7

4:28 PM

7

4:28 PM

The Best Parts & Technicians for yourCase Skid Steer Loaders & CTL Track Machines are

at Brooks Sales. They are waiting for you.

KOMATSU PC300LC-7EO

Guy Roof2091 Bishop Rd. • Greensboro, NC 27406

[email protected]

2006 KOMATSU PC300LC-7 4200 HRS,48” BKT 70% U/C PATTERN CHANGER, EXCELLENT CONDITION ..........$135,000

KOMATSU D65PX-15EO

2006 KOMATSU D65PX-15EO 6715 HRS,50% U/C, CAB/AC, ST TILT, DRAW BAR,VERY DRY & GOOD COND, WORKREADY ......................................$70,000

DEERE 670A

1978 DEERE 670A SCARIFIER 30% RUBBER, GOOD CONDITION ....$18,500

KOMATSU D31EX-22

2009 KOMATSU D31EX-22 1780 HRS, 80 TO 90% U/C PAT BLADE, EXCELLENTCOND ........................................$45,000

KOMATSU PC200LC-8

2006 KOMATSU PC200LC-8 6810 HRS,48” BKT, MAN THUMB, NEW RAILS &SPROCKETS, VERY GOOD COND $77,500

VERMEER BC1800XL

2008 VERMEER BC1800XL 883 HRS, 140 HP DEERE, VERY GOOD COND. JOB READY ................................$37,500

CAT CS56

2008 CAT CS56 84” SMOOTH DRUMROLLER W/CAB & AIR, 75% TIRES, 5000HRS, VERY GOOD COND ..........$77,500

CAT 312B

2000 CAT 312B 6824 HRS, 75% U/C,MANUAL THUMB, 30” CAT BKT, FRESHHYD PUMP W/WARRANTY ........$42,500

2010 DOOSAN DX350LC 2150 HRS, AYX HYD, 54” BKT, EXC. CONDITION ..............................................................................................................................$150,0002007 KOMATSU D61PX-15EO 5918 HRS, 60 TO 70% U/C, VERY GOOD CONDITION ................................................................................................................$89,5002007 KOMATSU WA430-6 3850 HRS, 23.5X25 RADIALS, 4.6YD GP BKT W/B.O.E. ..................................................................................................................$149,000TEREX TA40 GEN 7 4500 HRS, TIER III, EXCELLENT CONDITION ............................................................................................................................................$145,000ATTACHMENTS(2) 36” HENSLEY KOMATSU PC150 BUCKETS WITH SIDE CUTTERS LIKE NEW......................................................................................................................$1,500 EA.

ADDITIONAL EQUIPMENT AVAILABLE

Free Delivery within 200 Miles!


WILMINGTON, N.C. (AP) Transportation officials areconsidering reopening a railroad line in southeastern NorthCarolina. The StarNews of Wilmington reported that officials are

considering if it would be worth the investment to restore a27-mi. (43 km) line between northern New Hanover Countyand southern Duplin County. Paul Worley of the state rail division is studying the local

economic impact and cost of restoring the line betweenWallace and Castle Hayne. Worley said officials also are looking at connections to

military bases and industrial sites and terminals, includingthe Port of Wilmington. He said state lawmakers will get a preliminary report on

the idea by March 1. A final report is due in January 2015. Officials say restoration of the line could help attract new

industry to the area. (This story also can be found on Construction Equipment

Guide’s Web site at www.constructionequipmentguide.com.)

Reopening Decision…

Officials ConsiderRestoring 27-MileN.C. Railroad Line

LOGANSPORT, La. (AP) A project two decades in themaking will mark its next milestone when constructionbegins in January on new U.S. Highway 84 bridges overSabine River. The (Shreveport) Times reported a $20.4 million con-

struction bid recently got the green light from the TexasDepartment of Transportation, which is leading the project inconjunction with the Louisiana Department ofTransportation and Development. James ConstructionGroup LLC, of Baton Rouge, was awarded the contract. Contractors first will build a two-lane span close to the

existing railroad bridge to accommodate motorists travelingeast from Shelby County, Texas, into Logansport. Then theU.S. Highway 84 bridge will be demolished to make way foranother two-lane span to handle westbound traffic. All trafficwill be diverted onto the first bridge until construction of thesecond span is completed.

(This story also can be found on Construction Equipment


Replacement of Sabine River SpanSet for January

INTERSTATE EQUIPMENT CO., INCwww.interstateeq.com • N. Seymour Dr., Thomson, GA 30824 (706) 595-1550

We Specialize inQuality - One Ownerand Late Model

Machines!

2004CHEVROLETKODIAK C7500C7 Caterpillar Engine;137,789 mi; Drive Side:Left Hand Drive; GVWR

25,950, AIR BRAKES, 13'ftSERVICE BODY, LINCOLNCOMMANDER 400, AUTOCRANE 6006H, AIR COM-

PRESSOR$36,900

2001 Ford F750 XL

163,153 Miles, Drive Side, Left Hand Drive,

Autocrane 6006H, Hyd.Outriggers

$37,500

2004 Case721D

4 in 1 Bucket, Solid Tires, Approximately

3,000 hrs.

$59,900

2013 EagerBeaver

50GSL/BR350 Ton Detach Lowboyw/Beavertail & ManualRamps, Pony Motor

Call for Special Price!

1997 KAWASAKI 65Z IV

9092 Hrs, Cold A/C

$38,500

2014February 5-7

NC State Fairgrounds, Raleigh NCHours: 9am to 4pm

Wednesday, Thursday, FridayFree Admission and Parking

It’s Not Just for Farmers...

www.SouthernFarmShow.comA Southern Shows Inc. Production | 800.849.0248

CaterpillarNew Holland • JCBGehl • Kubota

Hyundai • HitachiBoxer • John DeereVolvo • Takeuchi

and more

Construction professionals know the Southern Farm Show has a great selection of construction equipment. Loaders, excavators, trenchers, andgrading equipment can be found

throughout the show. You’ll also findattachments and other products for

construction contractors.


Booth 1425 in

the Gold lot.

COME

VISIT US!

Keep crew and equipment safer with the MAC3 Wind Speed Alarm.

508.995.2200 www.maximum-commercial.com

WWW.BRANDYWINE-EQP.COMCelebrating 70 Years in the Industry • Shipping & Containerization Available

Call David Basulto or Keith Davis 800-462-4123Wholesale/Export Call Hank Meinhardt at 240-417-3236

1997 Cat 815F, OROPS, 12’4” Tilt Blade,New Feet Installed, Stk#’s 409H ........................................................Call for Price

1984 Grove TMS250B, EROPS, 6x6,80’ Reach, 26’-46’ 3 Sec Boom, Stock#482G ........................................$52,500

2006 Cat 330DL, Model #492G, 4600Hrs, 56” Bkt, A/C, 12’10” Stick ........................................................Call for Price

2005 Cat D8T, Cab, Air, Cat Ripper,Trimble GPS, New U/C & EqualizerBar, One Owner Machine, 12’6” Blade,Stock# 413G ....................Call for Price

2011 Cat 272C, ROPS, 6’ G.P., LightPkg, Aux Hyd, 10’ Reach, AC/Heat,Stock# 488G ............................$49,500

2010 Cat 950H, 9’5”, EROPS, A/C andHeat, Stk #374H......................$135,000 2011 Cat 304D CR, 970 Hours, EROPS,

Aux Hyd, Hyd Tilt Blade, Stk #409H...................................................... $46,500

1997 Cat D8R, S/N M02107, Stock#956G, EROPS, AC/Heat, SU Blade, SSRipper, 24” Tracks, Last Serviced at16,941 Hrs ..............................$165,000

2008 Komatsu PC200LC-8, 1,394 Hrs,9’10” Stick, 42” Bucket, Rear VisionCamera, Brand New TAG MechanicalThumb, Stk # 381H ..........Call for Price

1994-2000 XL4100, New Paint, Serviced................................Starting at $14,500

New 35-50 Ton Detachable Lowboys ..............................................Call for Price

2006 Komatsu WA4005L, EROPS, L-Series, 2180 Loadrite System, Stock#365H ..........................................$72,500

(4) Avail.In Stock New

(1) Available

Many Lowboys in Stock!NEW/UNUSED

WE BUYTRUCKS!

WE BUY EQUIIPMENT!

(2) Available

Low Hours

Low Hours


USED MATERIAL HANDLERS2003 Liebherr R924EW

New 15kw Generator & Controller, 36’ Reach $85,000

1995 LITRONIC LIEBHERR A932

36’ Reach..................................................$56,000

2201 Mingee Drive • Hampton, VA 23661757-827-4778

[email protected] • www.aeandsupply.com

For the second straight year, exhibit space has sold out forThe Rental Show. In 2014, the trade show will have a greaternumber of exhibitors, a larger show floor and an increasednumber of first-time exhibitors.There will be more than 675 exhibitors in Orlando, Fla.,

next February at The Rental Show, which is an increase of 10percent over 2013. Of the 2014 exhibitors, more than 80 willbe brand-new to the show.The first-time exhibitors cover all three trade show depart-

ments — construction/ industrial, general tool/homeownerand party/special event — and will be displaying products

such as generators, access equipment, pumps, drywall equip-ment, tools, lawn and garden equipment, software, furniture,games, dinnerware, centerpieces and more.In addition to what’s offered from these first-time compa-

nies, many exhibitors debut new products at The RentalShow each year. More than 120 companies have submittedproducts for inclusion in The Hot List, the special supple-ment featuring the latest rental products that is distributedwith the January issue of Rental Management and availableon site in Orlando.Show-Only specials are another offering from exhibitors,

with more than 60 companies signing up to offer specials todate and more companies to come. Show-Only specials areincentives for purchasing that are available just to attendeesat The Rental Show, a benefit many attendees take advantageof each year.“Whether it’s free freight or an extra 5 percent off or some-

thing else, every year I save enough with the show-only spe-cials to pay for my trip to The Rental Show,” said MikeBaartman of Rent-All in Sioux Center, Iowa. “You can’t beatthe deals. The major benefit of going to the show is the sav-ings you can only get from being there in person.”The Rental Show 2014 is Feb. 9 to 12 at the Orange

County Convention Center in Orlando, with the trade showFeb. 10 to 12. Discount registration, offering AmericanRental Association members a savings of $100, is availablethrough Dec. 9. For more information, visit TheRentalShow.com. (This story also can be found on Construction Equipment


Rental Show SpaceSells Out for SecondConsecutive Year

“The major benefit of goingto the show is the savingsyou can only get from beingthere in person.”

Mike BaartmanRent-All


www.MorookaCarriers.com1-877-667-6652

#1 Selling Crawler Carrier in the World!Japan • United States


Bobcat Launches Tier IV Non-DPF Solution LoadersBobcat Company has released

its first Tier IV loaders — includ-ing a non-diesel particulate filter(DPF) engine solution. The sevenmedium-sized machines make upthe most popular size class in theBobcat loader family and provideoperators with all of the same per-formance benefits of the previousinterim Tier IV models.

The Tier IV Bobcat non-DPFsolution was achieved by design-ing an ultra-low particulate com-bustion (ULPC) engine. TheULPC is accomplished through aspecially designed engine combus-tion chamber that reduces theamounts of particulate matter cre-ated during combustion.Therefore, Tier IV emissions com-pliance can be achieved withoutusing a DPF, according to the man-ufacturer.

In addition to eliminating theneed for a DPF, the new enginesused in 500 frame-size loaders willhave 4 to 12 percent increase intorque. This increase in torque isproduced over a wide range ofengine rpm, allowing operators ofall skill levels to better utilize themachines’ maximum performance.

The S510, S550 and T550 fea-ture a radius lift path, providingoperators the reach and visibilitythey require for dumping over awall, backfilling or loading flatbedtrucks. The S530, S570, S590 andT590 models feature a vertical liftpath, providing operators the abili-ty to lift heavier loads higher, mak-ing it easier to clear high-sidedtruck boxes and hoppers, as well asplacing pallets.

The new Tier IV loaders featurea machine protection system thatmonitors, manages and shuts downthe engine if needed. This systemmonitors engine coolant and oiltemperatures and will manageengine systems to reduce thepotential of these fluids reaching apoint where the machine has to beshut down. This minimizes poten-tial damage to the engine, stopsunnecessary engine wear andkeeps operators working.

Another new feature of the skidsteer and compact track loader lineis cold weather protection.Anytime the engine temperature istoo low, the loader will temporari-ly limit the maximum engine speed(rpm) to prevent premature com-ponent wear or failure. Engine idle

speed also is raised slightly to helpthe engine reach its operating tem-perature faster. As soon as theengine warms up to a predeter-mined temperature, the protectionmechanism will deactivate.

Cab-Forward Design The 500 frame-size loaders fea-

ture a cab-forward design thatmoves the operator closer to theattachment and provides increasedvisibility in all directions. The newloaders tout a large cab door open-ing, offering greater visibility to thecutting edge of the bucket or thecorners of an attachment.

Windows on the sides and rearof the cab are larger in size to pro-vide more visibility to the tiresand back of the machine. Thelarger top window makes it easierand more comfortable for theoperator to see an attachment withthe lift arms raised, an advantagewhen loading trucks or perform-ing other tasks.

Easier MaintenanceImproves ProductivityOperators want to spend mini-

mal time on routine maintenanceto start the workday earlier, and theloaders are designed to work longhours in demanding conditions.Simple check points and superiordesign make it easier to performmaintenance correctly at the prop-er intervals. The auxiliaryhydraulic quick couplers aremounted directly to the front plateof the lift arm to provide a solidmounting, and hoses are routedthrough the loader arms for betterprotection.

Operator Comfort Is KingComfortable operators are more

productive, so to create a betterworking environment, the 500frame-size loaders feature a largecab, redesigned interior andimproved cab pressurization. Theloaders have a pressurized cab witha new one-piece seal that goes allthe way around the door and fitsinto a special curved pocket. Thisminimizes the amount of dirt anddust that might enter the cab, creat-ing more enjoyable working con-ditions and making it easier toclean the cab.

Operators also have the choicebetween standard foot pedalhydraulic controls, the advanced

control system (ACS) or the selec-table joystick controls (SJC) on allmachine models.

The Best of Both Worlds:Hydraulics andHorsepower

The hydraulic systems on M-Series loaders have been engi-neered for higher standard flowand pressure, which providesincreased attachment performance.

Engine horsepower and hydraulicflow are matched to the loader’srated operating capacity, size andweight — producing a loader thatcan outperform higher-horsepowercompact loaders.

Available only on M-Seriesloaders, the optional deluxe instru-mentation panel intelligently mon-itors key loader functions —including fuel consumption — andthe keyless start helps prevent

theft. The 5-in., full-color LCDscreen offers better readability andoperator interaction. Easy-to-readvirtual sweep gauges allow opera-tors to quickly read and understandthe machine’s performance.

For more information, visitwww.bobcat.com.

(This story also can be found onConstruction Equipment Guide’sWeb site at www.constructionequip-mentguide.com.)

The S530, S570, S590 and T590 models feature a vertical lift path, providing operators the ability tolift heavier loads higher, making it easier to clear high-sided truck boxes and hoppers, as well asplacing pallets.

The 500 frame-size loaders feature a cab-forward design that moves the operator closer to theattachment and provides increased visibility in all directions.


Since 1985!

CALL JENNIFER TODAY!(888) [email protected]

www.RBusedParts.com

NEW, USED & REMAN PARTS• Undercarriage

• Arms & Booms

• Cylinders

• Valves

• Transmissions

• Pumps

• Engines

• and More!


ConExpo 1999Las Vegas, Nevada

ConExpo ’99 Highlights the Best, Brightest

Las Vegas was the place to befor the latest in machinery, equip-ment and services for the con-struction, aggregates and ready-mix concrete industries.

With more than 1,850exhibits, ConExpo ’99 treatedattendees to miles and miles ofsmiles. Construction EquipmentGuide was there to report on allthe happenings.

(This story also can befound on ConstructionEquipment Guide’s Web site atwww.constructionequip-mentguide.com.) CEG


This ConExpo article was published in Construction Equipment Guide (CEG) in March 1999. This and other ConExpoarticles to follow will be part of a continuing series that take a look back at ConExpos past through the reporting of CEG.We hope you enjoy these retros as much as we did searching for them deep in our archives.

Coming next issue: ConExpo Catapults From a Humble Road Show to an Industry Extravaganza.


Colleagues have bid a fond farewell toJCB Chief Executive Officer Alan Blakewho is retiring from the company afteralmost a quarter of a century of service.Blake will remain as an advisor to JCB.

Blake became JCB CEO on Jan. 1, 2010,making him only the fifth person to hold theposition in JCB's history. Dozens of friendsand colleagues gathered at the World HQ inRocester to say goodbye at a special presen-tation.

Chief Executive Officer DesignateGraeme Macdonald will take over as CEOon Jan. 1.

“Alan has contributed a huge amount tothe growth and success of JCB over manyyears,” Macdonald said. “The expansionprojects Alan led enabled JCB to double itsproduction from 36,000 to 72,000 machinesover a five year period.

“In addition to his vast achievements atJCB, he will also be remembered for hishumility and for making time to speak toeveryone, no matter what their rank or posi-tion and that’s something we are all going tomiss.

“On behalf of the 11,000 JCB employeesaround the world, our dealers and customers,we wish him a very long and happy retire-ment.”

“Coming to JCB was one of the best deci-sions of my life,” Blake said. “The breadthand width of what you can learn here is enor-mous, and the opportunity to achieve greatthings is endless.

“I have been fortunate to have a greatcareer here and one that has coincided withthe global growth of the company. I havemet and worked with some truly brilliantpeople all around the world and I will neverforget my time at JCB.”

Blake joined JCB in 1989 from Somerset-based Westland Helicopters after a distin-guished 19-year tenure at the company,which saw him rise through the ranks fromapprentice to head of HelicopterTransmissions.

He joined JCB Transmissions inWrexham in 1989 as operations directorwith responsibility for developing new trans-missions for two of JCB’s two key products:the backhoe loader and Loadall telescopichandler.

In 1995 he was promoted to managingdirector of JCB Transmissions and led thecompany through an unprecedented periodof growth which saw the doubling of pro-duction capacity with the opening of a sec-ond plant at the Wrexham site.

In 2000, Blake was appointed managing

director of JCB Service with the task ofmaximizing JCB’s reputation for excellentcustomer service as the company rapidlyexpanded its dealer network and customerbase in new and expanding territories.

In 2003, he became group manufacturingdirector, making him responsible for JCB’sglobal production operations. Blake led the

biggest expansion and investment programin the company’s history.

Blake became JCB’s chief operating offi-cer in 2009 before taking up his current posi-tion.

(This story also can be found on

Construction Equipment Guide’s Web site at

www.constructionequipmentguide.com.)

JCB CEO, Alan Blake (front, C) with his wife Diane at his retirement presentation.

Popular JCB CEO Bows Out After Almost 25 Years of Service


REGISTER NOW TO SEE WHAT’S NEWREGISTER NOW TO SEE WHAT’S NEWGet the ultimate up-close look at the future of asphalt.Registration is now open for the show that offers an immense unveiling of all the newest equipment, technology and product breakthroughs in asphalt. Bringing you the latest in everything from warm-mix asphalt to making roads smoother, it’s the one show that paves the way to working smarter.

Register now at www.conexpoconagg.com to save over 30%!

MARCH 4-8, 2014 | LAS VEGAS CONVENTION CENTER | LAS VEGAS, USA Co-located with ®2014


SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL

• No tools required• No expensive

hardware needed• No more rags

stuffed into hoses• No more messy

plastic caps• The ultimate

contamination control tool• One hand installation• Eliminate hydraulic

oil spills & clean up• Quick installation

& ease of usage• Safe for personnel

& environment• Industry acclaimed• 100% Made in USA

For more information contact Mike Pearl at914.980.8890 or email mike @ flangelock.comwww.flangelock.com


County Voters Approve $22.5M ‘Penny for Progress’ Projectmunity for approximately 110 years, and continues to do so.This location was important for several reasons. The com-munity wanted to keep the judicial complex in the down-town area, and the county owned the property on which thebuilding sits.” Located at the corner of North Harvin and East Canal, the

new facility is roughly 80,000 sq. ft. (7,432.2 sq m) and pro-vides adequate storage for legal records, as required by statelaw. The judicial center houses the probate office, publicdefender’s quarters, the solicitor’s office, the family courtdivision and the circuit division of the clerk of court’s office.There’s also a jury assembly room, an intake space for theDepartment of Social Services and a workroom office spacefor the county’s IT department. At a cost of $22.5 million, the project didn’t happen

overnight.“This project has been discussed a good bit over the last

several years, but the county didn’t have the means to pay forit,” Campbell said. “Our county council decided to providea list of projects on a one cent sales tax initiative on the ref-erendum several years ago.”Sumter County voters, in the general elections of

November 2008, approved the “Penny for Progress” project.Passage of the referendum authorized the Sumter Countycouncil to levy a temporary sales tax to fund 16 capital proj-ects. The sales tax was implemented in May of 2009 and willbe removed when the $75 million is collected, or in sevenyears, whichever occurs first.“After the courtroom shooting in Atlanta several years

ago, our Chief Justice of the South Carolina Supreme Courtcame up with a set of minimum security standards all court-houses must follow,” Campbell said. “That helped push thisproject up on the list of needs when the council waswrestling with the sales tax initiative and what projects toplace on the ballot.”As far as construction challenges Campbell said, “I think

the biggest hurdle was the limited amount of space aroundthe proposed site for the general contractor’s equipment andsupplies, because the county library and the chamber ofcommerce were still in operation as this structure was goingup. The biggest challenge of all was parking. The site cho-sen to put this building was nothing but extra parking for sev-eral county buildings in the area. So, when the fencing wentup to outline the construction site, parking really became anissue for all.”The judicial center design and construction team included

general contractor Thompson-Turner Construction, architectStevens & Wilkinson of Columbia, South Carolina andJustice Planning Associates, which handled facility pro-gramming. Stevens & Wilkinson also served as engineer,responsible for civil, structural, mechanical, electrical, secu-rity and audio/visual matters.According to Ashby Gressette, senior vice president and

director of architecture of Stevens & Wilkinson, the firm’soverall vision was to provide a technologically savvy facili-ty for the county’s judicial system, which would be incorpo-rated into the fabric of historic downtown Sumter.“Security is always a number-one priority in courthouse

design, said Gressette. “The basic design concept recognizes

and separates the primary users — public, restricted areas forjudges and jury and the high-security holding areas fordetainee circulation. Beyond the basic layout, security cam-eras and electronic locks assure restricted travel. Screeningtakes place at a checkpoint for both visitors and packages,with all actions monitored from two remote locations. There are approximately 85 to 100 employees in the

building at any given time. Four of the five courtrooms arelocated on the second and third floors. On each floor, court-rooms flank a security core that stacks over the holding area.The judges’ chambers and jury deliberation rooms, also onthe two floors, have limited access via a system of restrictedcorridors. The public access corridor to the courtrooms islocated on the south side of the building.Law enforcement is provided parking spaces adjacent to

the rear of the building. All judges have a private entranceinto a brick fenced parking lot, which leads straight to their

Luke Lukens of Sumter County, S.C. photoWorkers pump cement into the elevator base.

Luke Lukens of Sumter County, S.C. photoWorkers install a storm water inlet.

Luke Lukens of Sumter County, S.C. photoCrews install storm drainpipes.

Luke Lukens of Sumter County, S.C. photoCrews set in place the first floor steel beam.

SUMTER see page 76

SUMTER from page 1

Luke Lukens of Sumter County, S.C. photoThis civic landmark will serve generations to come.

cONSTRUcTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 8, 2014 •

Contact us today.

CHECK OUT OUR LATEST BIG IDEA.

You gave us plenty of big ideas for our reimagined E-Series. A clean-sheet redesign resulted in North America’s largest ADT — the new John Deere 460E, plus the 370E and 410E. Thanks to customer input, all three come loaded with durable John Deere EPA Interim Tier 4/EU Stage IIIB diesel engines. Purpose-built transmissions with eight forward and four reverse gears. Heavy-duty Deere-built axles with wet-disc brakes. Standard adaptive suspensions. Full-time six-wheel drive. Ground-level servicing. Boost productivity, uptime, and savings. Big time.

Albany, GA229/888-1212

Atlanta, GA404/691-9445Grovetown, GA706/855-5440Columbus, GA

706/687-3344Braselton, GA

770/965-1889Macon, GA

478/788-1586Adairsville, GA770/773-9857

Brunswick, GA912/264-6161Savannah, GA

912/964-7370Dothan, AL

334/794-8691Troy, AL

334/566-4181Perry, FL

850/584-9200Tallahassee, FL850/575-5600

Aynor, SC843/358-5688

West Columbia, SC803/794-9340Simpsonville, SC864/963-5835

Ladson, SC843/572-0400

Andrews, SC843/221-4940Walterboro, SC843/539-1420

R.W. MOORE EQUIP. cO.

Main OfficeGarner, NC

919/772-2121Ahoskie, NC

252/332-5550Hope Mills, NC910/424-1200New Bern, NC

252/638-5838Greenville, NC

252/758-4403Castle Hayne, NC910/675-9211

Ashland, VA804/798-6001

Manassas Park, VA703/631-8500Winchester, VA540/667-9777Richlands, VA

276/596-9440Asheville, NC

828/667-0176

Charlotte, NC704/597-0211800/532-6797Greensboro, NC336/668-2762800/632-0376Mt. Gilead, NC910/439-5653800/692-9175

Salem, VA540/380-2011

cOASTAl EQUIPMENT

cORP.

www.coastalequipment

system.com

Main Office

504 South MilitaryHwy.

Virginia Beach, VA23464

757/424-1900Yorktown, VA

757/898-1900

Nashville, TN615/501-8600Chattanooga, TN423/855-0633

Knoxville, TN865/546-3207Kingsport, TN

423/349-5001Louisville, KY

502/253-3721Richmond, KY

859/623-2030

Bowling Green, KY270/842-3400

London, KY606/862-8447

Lutz, FL813/995-0841

Riverview, FL813/621-4902

Sarasota, FL941/752-1300Fort Myers, FL

239/334-3627

Miami, FL305/592-5740

Pompano Beach, FL954/977-9541

West Palm Beach,FL

561/848-6618Orlando, FL

407/299-1212

flINT EQUIPMENT cOMPANy JAMES RIVER EQUIPMENT NORTRAX

,

u

a e

M a 5

,

4

Powering Your Productivity...For Over A Century

Portable Power

©2013 Doosan Infracore Portable PowerFind Us on DoosanPortablePower.com (800) 633-5206 Follow Us on

AIRCOMPRESSOR

SALESGEORGIA

5490 Thomaston RoadMacon

(478) 474-8460

NORTH CAROLINA

11425 Reames RdCharlotte

(704) 596-8283

Asheville(828) 687-0620

Raleigh(919) 661-8710

Greenville(252) 754-5280

GEORGIA

Savannah (912) 964-8079

SOUTH CAROLINA

Columbia

(803) 791-0740

Piedmont(864) 704-1060

North Charleston(843) 414-1120

TENNESSEE

Knoxville (865) 525-1845

Chattanooga(866) 495-3406

BLANCHARD MACHINERY,

INC.www.blanchardmachinery.net

FLORIDA

1890 NE 150th St.Miami

(305) 949-2581Fax: (305) 949-0747

Miami(305) 232-2255

West Palm Beach(561) 833-4634

ALABAMA

2238 Pinson Valley ParkwayBirmingham

(205) 841-6666

Mobile(251) 633-4020

Montgomery(334) 262-6642

Huntsville(256) 350-0006

Oxford(256) 832-5053

FLORIDA

Pensacola(850) 479-3004

GEORGIA

Atlanta(404) 696-7210

PINNACLE CENTRAL

COMPANY, INC. www.pinnaclecentral.com

FLORIDA

103 Bryan StreetJacksonville

(904) 354-5746

Polk City(888) 253-2444

JWH EQUIPMENT

www.jwhequipment.com

MISSISSIPPI

1101 Hwy. 80 WestJackson, MS 39204(601) 974-8090

ASC CONSTRUCTION EQUIPMENT

COWIN EQUIPMENT


Nicolas Delivers MHD G2 SPE to Addax Petroleum, NigeriaA tropical climate, average tem-

peratures around 86°F, salty air:for the MHD G2 SPE with its 20driven axle lines and completewith an electronic multi-modesteering system, which is currentlybeing delivered to AddaxPetroleum in Nigeria, it also has tocombat the toughest operatingconditions. With a zinc dust primer as a basisand coated with polyurethane, and paintedusing environmentally compatible so-calledhigh-solid top coat in the customer’s compa-ny color, the vehicles are suitably equippedto resist the adverse weather conditions.With up to 50.7 tons (46 t) axle load and theability to also accommodate extremely con-

centrated loads, the modular vehicle is pre-destined for use in the demanding day-to-day operations in the oil and gas industry,according to the company.Addax Petroleum will be using the newly-

acquired vehicles mainly for loading off-shore components onto floating productionstorage and offloading units (FPSOs), which

are utilized in offshore activitiesfor the extraction, storage andloading of crude oil and naturalgas by means of one or moredrilling platforms. AddaxPetroleum is part of the SinopecGroup, the largest oil refininggroup of companies in Asia, andoperates production facilities in

Africa, Middle East and the North Sea.“We were able to deliver at very short

notice, the vehicle precisely fulfilled all pay-load requirements and the customer waswell convinced by the excellent quality ofworkmanship. The latest changes in the pro-duction process guarantee even higher relia-bility of our vehicles,” said Pierre Berret,

area manager sales of Nicolas.The bogie of the new Nicolas MHD G2

generation — available with mechanical orelectronic multi-mode steering — has beenspecially designed to carry extremely con-centrated loads. For road transportation, theMHD G2 can be used as a trailer or semi-trailer combination as well as coupled side-by-side as a 3 or 4-file combination. Due tothe Nicolas steering philosophy, the MHDG2 has the lowest driving height on the mar-ket when loaded, according to the company.For more information, visit www.nico-

las.fr.(This story also can be found on

Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)

Pages 35-38To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

SECT IONTrucks & Trailers

B&W Introduces New RVB3500 Companion Trailer HitchB&W Trailer Hitches, a U.S.-based manufacturer of

heavy-duty, engineered trailer hitches and aftermarkettruck/trailer accessories, introduced its RVB3500 compan-ion fifth wheel aftermarket trailer hitch. The new companionhitch employs B&W’s turnoverball mounting design thatpromotes quick, single-point hitch installation. The quiet rid-ing hitch is designed to handle today’s heavier trailers andpickups with varying truck bed configurations, according tothe manufacturer.B&W’s earlier companion model had an 18,000-lb.

(8,164 kg) towing capacity and had gained a solid reputationwithin the RV community for its ease of installation, robustdesign, smooth ride and, most of all, its low noise character-istics. The original companion hitch has remained virtuallyunaltered since its inception in 1998. The new 20,000-lb.(9,072 kg) rated companion fifth wheel trailer hitch has allthe features that RV owners and dealers favored in its prede-cessor and then some.“The combination of product quality and reliability, along

with B&W’s reputation among customers, have made theB&W Companion fifth wheel hitch our most popular,” DonCollins, president, DC’s RV Centers, said. “With its 20,000-pound towing capacity, enhanced height adjustment andflexible installation design, we anticipate that the new com-panion will be even more commercially successful than itsforerunner.” B&W’s new Companion fifth wheel aftermarket trailer

hitch is designed for today’s trucks and trailers and fortomorrow’s as well. RV trailers are becoming bigger andheavier, and the towing capacities of the pickup trucks thathaul them have continued to increase. The new companion

hitch features two adjustable pivot arms that can be orientedhorizontally, relative to the truck’s axle, and vertically toallow trailers to clear the taller truckbed walls now on many late-model pickups. Thenew hitch also featuresadjustable plastic feetthat allow the hitch toadapt and mount snuglyto an ever-increas-ing variety oftruck bed corru-gation patterns.The entire system

is made of Americansteel and is finished top tobottom with a tough, durablepowder coating. Once installed,the substructure leaves the truckbed totally unobstructed. The sub-structure’s socket accommodatesany of seven different turnover-ball-style hitches, including the RVB3500 companion.The single-post hitch base drops easily into the socket and,

once married to the substructure, uses adaptable leveling feetfor stabilization and bolts to lock it securely into position.Pivot arms are also fully adjustable with a height range of 161/4 to 18 1/4 in. (41 to 46 cm). The arms feature thickpolyurethane bushings that allow the locked coupler head topivot effortlessly, and the coupler head itself is fitted with ahydraulic dampening mechanism that absorbs road shock

and tilts up to seven degrees.“Our new 20,000-pound rated companion hitch is a

response to recent trends in the structure and shape of truckbeds, along with the increasing lengths and weights of trail-ers,” Cleat Stockebrand, product design engineer of B&WTrailer Hitches, said. “The new companion hitch basetakes advantage of the structural features of late modeltruck beds, optimizing the capacity of the hitch and giv-

ing customers the needed adjustments to accommo-date their towing needs.”

The new companion fifth wheel aftermar-ket trailer hitch makes unhitching the

trailer easier as well. The hitch fea-tures massive 1-in. (2.5 cm)-thick castlocking jaws that are twice as hefty astraditional mechanisms. The jaw’srobust cam-lock design allows anyoperator to uncouple a trailer evenwhen parked on significantly uneventerrain, according to the manufacturer.The RVB3500 companion fifth

wheel aftermarket trailer hitch fits vir-tually any pickup truck make and model, including any 2013Ram 3500, without a factory-installed hitch prep package.The product has been extensively tested and meets orexceeds the J2638 standard for a 20,000-lb. vehicle tow rat-ing (VTR). As with any towing scenario, B&W strongly rec-ommends that users never exceed a VTR.For more information, visit .www.Turnoverball.com.(This story also can be found on Construction Equipment


Thenew companion

hitch features twoadjustable pivot arms that

can be oriented horizontally, rela-tive to the truck’s axle, and vertically to

allow trailers to clear the taller truck bedwalls now on many late-model pickups.

Final function tests before delivery: the Nicolas MHD G2SPE with coupled PowerPack.

• January 8, 2014 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

TIGER EQUIPMENTwww.tigerequipment.com

4181 New Bern HwyJacksonville, NC 28546

910-346-1932

805 Old Roberts RdBenson, NC 27504919-989-0066

KELLY TRACTORMiami, FL

[email protected]

Davie, FL954-581-8181

Fort Myers, FL239-693-9233

Clewiston, FL863-983-8177


Mack Celebrates Ongoing Commitment to Tech EducationMack Trucks continues to invest in train-

ing for future technicians, recently awardingNathaniel Chyle, a student enrolled inWyoTech’s Diesel Advanced TechnologyEducation (DATE) for Mack Trucks pro-gram in Blairsville, Pa., with a Mack TrucksDATE Scholarship.

Chyle, who aspires to be a shop foremanor lead technician, will use the $8,700 schol-arship to take part in the three-month DATEprogram in preparation for a position servic-ing and repairing Mack trucks. Studentsenrolled in the DATE program receive spe-cialized training on Mack engines, electron-ics, emissions, powertrain and chassis com-ponents. The program is designed to helpstudents graduate as advanced apprenticetechnicians with a potential for an accelerat-ed path to achieve Mack master technicianstatus.

“Students who complete WyoTech’sDATE program for Mack Trucks in additionto the core Diesel Technology training pro-gram are ready to join the workforce andwill bring extensive hands-on experience totheir new positions at Mack dealerships,”said Dale Eslinger, executive director of theWTI Foundation, a 501(c)(3) non-profitorganization that administers scholarshipsfor WyoTech students.

Mack’s own technician training pro-grams, offered through the seven MackTrucks Academy locations, also recentlyreceived recognition, winning a 2013

Excellence in Learning Award from theBrandon Hall Group, a preeminent researchand analyst organization focused on drivingorganizational performance. Mack Trucks

Academy took home a Gold Award, thehighest honor, for its comprehensive cur-riculum and certification program that helpsMack technicians progress through trainingpaths as they work toward becoming mastertechnicians.

“It’s an honor to receive what is oftencalled an ‘Academy Award’ by the learningindustry,” said John Walsh, Mack vice pres-ident of marketing. “Strong training andcertification programs are essential toMack’s businesses, helping ensure our serv-ice technicians are authorities on the opera-tions of our vehicles and are up to speed onthe latest technologies.”

Mack’s certification program blendsonline and instructor-led courses, followedby comprehensive skills testing, to helptechnicians achieve the competencies need-ed to progress from skilled, to expert andultimately master technician and maintainthose certifications. At minimum, 50 per-cent of a Mack dealership’s service techni-cians must maintain Expert or Master Techstatus.

For more information, visit www.mack-trucks.com.

(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)

Mack Trucks recently awarded Nathaniel Chyle, a student enrolled in WyoTech’sDiesel Advanced Technology Education (DATE) for Mack Trucks program inBlairsville, Pa., with a Mack Trucks DATE Scholarship.

Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • January 8, 2014 •

• January 8, 2014 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

LB’s Trailer Sales2904 Harmony HighwayHarmony, NC 28634(704) 546-2231

Bobcat of Charleston(843) 725-6330(800) 220-6266

Bobcat of Columbia(803) 933-9996(800) 220-6266

Bobcat of Spartanburg(864) 342-9003(800) 220-6266

Bobcat of Savannah(912) 236-5538

www.bobcatops.com

Telescopic 55-Ton HRG Offers Multiple ConfigurationsThe telescopic 55-ton (50

t) hydraulic removablegooseneck (HRG) trailerfrom Talbert Manufacturingoffers a 20-in. (51 cm) deckheight, the versatility toextend deck length and theflexibility to operate withmultiple rear axle configura-tions. Talbert designed the 55-

ton HRG with a telescopicdeck capable of extendingfrom 30 to 50 ft. (9 to 15 m)long. Extended, the unit hasa 27-ft. (8 m) wood deck inthe front and a 3-ft. (.9 m)wood platform in the rearwith beams stretchingbetween. The trailer expandsand locks in 4-ft. (1.2 m) increments. Whenlengthened, the telescopic trailer is ideal forhauling any equipment that requires a longdeck, such as tanks, bridge beams or bulkyequipment. When compressed, the trailercan be used as a standard deck trailer. The HRG features a 96-in. (244 cm)

swing radius and a gooseneck extensionwith a 120-in. (305 cm) swing clearance.While the competition offers 22- and 24-in.

(56 and 61 cm) deck heights, Talbert offersthis telescopic HRG with a 20-in. deckheight.The unit can be set up as a four axle close

couple or in a 2 + 2 or 3 + 1 spread axle con-figuration. Due to permitting requirements,getting a trailer to an overall length of lessthan 53 ft. (16 m) can be important. TheTalbert 55-ton telescopic trailer features 3rdand 4th axles that can be flipped or removed,

plus a 24-in. pinned and hinged gooseneckextension that also can be flipped. With these two key features, the trailer can

be shortened to less than 53 ft. so there is noneed to obtain an over-length permit whenthe trailer is running empty.The Talbert 55-ton telescopic trailer is

equipped with standard air-ride suspension.The trailer also is equipped with optionalDura-Bright aluminum wheels, strobe lights

at each axle, and a batterybackup that powers the light-ing package when the traileris disconnected from thetruck cab.This trailer delivers

greater lifting capacity overcomparable models due tothe gooseneck design. Whilemost conventional trailersfeature only two or threecylinders that run perpendi-cular to the deck, Talbertengineers its trailers withfour that run parallel. Thismeans Talbert trailers offer astronger lifting capacity andminimizes or eliminates theneed for frequent loadadjustments, according to

the manufacturer. In combination with its heavy-duty T-1,

100,000-PSI minimum yield steel construc-tion, the Talbert 55-ton telescopic traileroffers added strength and reliability.For more information, call 800/348-5232

or visit www.talbertmfg.com.(This story also can be found on


Talbert designed the 55-ton (50 t) HRG with a telescopic deck capable of extending from 30 to 50 ft. (9 to 15 m)long. Extended, the unit has a 27-ft. (8 m) wood deck in the front and a 3-ft. (.9 m) wood platform in the rearwith beams stretching between.

Powerscreen Mid-Atlantic Inc. recentlyhosted an event premiering the AggreSandfrom Terex Washing Systems (TWS) at theCarolina Sunrock facility in Kittrell, N.C., aswell as an event that followed at CarolinaSunrock’s facility in Butner, N.C., featuringthe Matec System.In Kittrell, approximately 155 guests saw

shot blasted rock — hard granite rockindigenous to the area — fed into thePowerscreen Premiertrak 400 jaw crusher at

24 to 30 in. (61 to 76 cm). After beingcrushed down to a 4-in (10 cm) minus prod-uct, the material was fed into thePowerscreen 1000 Maxtrak equipped with a40 in. (102 cm) cone for secondary crushing,and then fed to the Powerscreen Warrior1400X equipped with a 12-ft. x 5-ft. (3.7 x1.5 m) two-deck screen box. This processreduced the size of the shot rock to 1.5 in.(3.8 cm) minus and was ready for the TerexAggreSand wash plant. All of these

machines work together to create five fin-ished products, three types of clean graveland two types of sand.The Terex AggreSand system combines

aggregate washing and screening with sandprocessing on a modular chassis. It brings

together Terex Washing Systems compo-nents in a modular design. The TerexAggreSand has multiple applications includ-ing virgin aggregate; manufactured sand;sand and gravel; crushed rock; crusher dust;

Powerscreen Mid-Atlantic Premieres AggreSand in N.C.

Pages 39-49

Crushing, Screening & Recycling SectionFor more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

(L-R): John Tankard, Katherine and Bryan Pfohl of Carolina Sunrock; AndrewConey of Powerscreen Mid-Atlantic; Kevin Sasser of Carolina Sunrock; and AdamLogan of Powerscreen Mid-Atlantic await the demonstration.

Andrew Coney (L), owner ofPowerscreen Mid-Atlantic, welcomesJason Rollins of G.S. Materials inBurlington, N.C.

(L-R): Adam Logan of Powerscreen Mid-Atlantic (L) talks about the operation ofPowerscreen products and how they work in tandem with the AggreSand to BrianDonaghy of Terex Washing Sytems and Marc Furman, Marco Furman, Ali Ramaliuof 1st Response Rail Service in Bishopville, S.C.

Powerscreen Mid-Atlantic invited more than 60 of its customers to see the TerexAggreSand machine as well as many Powerscreen products.

see POWERSCREEN page 44

Ian Williamson (L) of Powerscreen Mid-Atlantic and Jay Campbell of CarolinaSunrock go over the production capa-bilities of the Powerscreen products.

• January 8, 2014 • www.constructionequipmentguide.com • Crushing, Screening & Recycling Section • Construction Equipment Guide

8255 NW 58th StreetMiami, FL 33166

305-592-5360Fax: 305-463-6066

5460 Okeechobee BoulevardWest Palm Beach, FL 33417

561-683-2015Fax: 561-683-4591

2801 Reese RoadDavie, FL 33314

954-581-8181Fax: 954-581-6464

801 East Sugarland HighwayClewiston, FL 33440

863-983-8177Fax: 863-902-1000

9651 Kelly Tractor DriveFt. Myers, FL 33905

239-693-6563Fax: 239-690-8600

8418 Palm River RoadTampa, FL 33619

813-630-0077F813-630-2233

9601 Boggy Creek RoadOrlando, FL 32824

407-850-9614F407-850-0823

2663 Roberts StreetJacksonville, FL 32207

904-737-6000F904-737-1260

5151 Dr. Martin Luther King, Jr. Blvd.Ft. Myers, FL 33905

239-481-8554F239-481-3302

5210 Reese RoadDavie, FL 33314

954-581-4744F954-583-0318

539 SW Arrowhead TerraceLake City, FL 32024

386-758-7444F386-758-7744

www.flaflerce.com

Construction Equipment Guide • Crushing, Screening & Recycling Section • www.constructionequipmentguide.com • January 8, 2014 •

www.thompsonmachinery.com

Camden, TN • 731-584-2732Clarksville, TN • 931-552-5496Columbus, MS • 662-327-3083Cookeville, TN • 931-646-3200Greenwood, MS • 662-453-5233Jackson, TN • 731-988-4240La Vergne, TN • 615-256-2424Manchester, TN • 931-461-5000Memphis, TN • 901-332-3051Tupelo, MS • 662-844-1634

www.thompsontractor.com

Birmingham, AL • 205-841-8601Dothan, AL • 334-671-1040

Huntsville, AL • 256-532-1776Mobile, AL • 251-626-5100

Montgomery, AL • 334-215-5000Oxford, Anniston, AL • 256-831-4104Panama City, FL • 850-785-4007Pensacola, FL • 850-471-6700

Shelby County, AL • 205-664-4833Tuscaloosa, AL • 205-247-2800

StowersCat.com

Knoxville, TN • 865-546-1414Knoxville West, TN • 865-218-8800

Sevierville, TN • 865-595-3750Kingsport, TN • 423-323-0400

Chattanooga, TN • 423-698-6943Crossville, TN • 931-484-4040

louisianacat.com

Alexandria, LA • 318-443-2577Bossier City, LA • 318-746-2341Hammond, LA • 985-340-2820Lafayette, LA • 337-837-2476

Lake Charles, LA • 337-439-3601Monroe, LA • 318-323-1345

Prairieville, LA • 225-673-3480Reserve, LA • 985-536-1211

www.ringpower.com

Daytona Beach, FL • 386-947-3363Gainesville, FL • 352-371-9983Lake City, FL • 386-755-3997Lakeland, FL • 863-606-0512Ocala, FL • 352-732-2800

Orlando, FL • 407-855-6195Palm Bay, FL • 321-952-3001Riverview, FL • 813-671-3700

St. Augustine, FL • 904-737-7730Sarasota, FL • 941-359-6050

Tallahassee, FL • 850-562-2121Tarpon Springs, FL • 727-938-1515

www.kellytractor.com

8255 NW 58 StreetMiami, FL 33166

888-502-8033 • 305-592-5360Davie, FL • 954-581-8181


Clewiston, FL • 863-983-8177Fort Myers, FL • 239-693-9233


SENNEBOGEN green line material handling machines make your competitors “green with envy”SENNEBOGEN green line material handling machines make your competitors “green with envy”

High Productivity – Low Operating Costs

Alabaster, AL205-621-2489Anniston, AL

256-831-2440Birmingham, AL205-591-2131Decatur, AL

256-355-0305Dothan, AL

334-678-1832Mobile, AL

251-457-8991Montgomery, AL334-288-6580

Shoals Area, AL256-383-5666Tuscaloosa, AL205-752-0621Panama City, FL850-763-4654Pensacola, FL850-505-0550Albany, GA

229-435-0982Atlanta, GA

404-366-0693Augusta, GA

706-798-7777

Calhoun, GA706-879-6200Columbus, GA706-562-1801Hoschton, GA706-654-9850Kennesaw, GA678-354-5533Macon, GA

478-745-6891Savannah, GA912-330-7500

POWER EQUIPMENT COMPANY

www.powerequipco.comKnoxville, TN865/577-5563LaVergne, TN 615/213-0900Chattanooga, TN423/894-1870Kingsport, TN423-349-6111Memphis, TN901-346-9800Saltillo, MS

662-869-0283

ATLANTIC EQUIPMENT & SUPPLY

www.aeandsupply.comHampton, VA 23661

757/827-4778800/325-0461

ASC CONSTRUCTIONEQUIPMENT USA, INC.

www.ascvolvo.comAsheville, NC828-687-0620Charlotte, NC704-596-8283Greenville, NC252-754-5280Raleigh, NC

919-661-8710Charleston, SC843-414-1120Columbia, SC803-791-0740Piedmont, SC864-704-1060

GS EQUIPMENT INC.www.gsequipment.net

Tampa, FL 866-586-8956

Fort Lauderdale, FL954-327-8808Fort Myers, FL239-334-6063Jacksonville, FL904-268-4400Orlando, FL

407-859-9160

LYLE MACHINERYwww.lylemachinery.com

Jackson, MS800-898-4000

Fax: 601-939-8440Gulfport, MS

228-832-7575Hattiesburg, MS601-296-7556Magnolia, MS601-783-2111

TRACTOR & EQUIPMENT CO.www.tractor-equipment.com


EVO. A NEW CLASS OF MACHINERY.

MR 110 EVO MR 130 EVO

www.wirtgenamerica.comROAD AND MINERAL TECHNOLOGIES


Carolina SunrockHosts PowerscreenDemonstrationsscalpings; iron ore; other mineral ores and construction anddemolition waste material.

At Carolina Sunrock’s Butner, N.C., location, customerssaw the Matec system in action that Carolina Sunrock pur-chased from Powerscreen Mid-Atlantic earlier in 2013. TheMatec is a completely automated system designed for recy-cling waste slurry water from an aggregate wash plant. Itremoves the silt and clay from the slurry water and producesa dry silt cake and then sends the clean filtered water back tothe wash plant for use. This eliminates the need for any set-tling ponds at the quarry and saves the customer the expen-sive maintenance costs that come with these traditionalponds.

The system at Carolina Sunrock consisted of a filter press,thickener tank, buffer tank, flocculant dosing station and

clean water tank. Matec is a world leader in custom designedwater treatment systems. Based in Italy, Matec has installedmore than 1,000 systems worldwide, with more than 75working in the United States.

Also during the event, Powerscreen Mid-Atlantic demon-strated the new Trakpactor 320SR impact crusher.

The Trakpactor 320SR is a mid-sized horizontal impactcrusher redesigned to offer operators and contractors excel-lent reduction and high consistency of product shape for per-formance in quarry and recycling applications. The crushingchamber features a 44.5 x 31.5 in. (1130 x 800 mm) feedopening, hydraulically assisted CSS adjustment, four barrotor and twin apron design and hydraulic overload protec-tion as standard. New to this model is an optional fully inde-pendent hydraulic pre-screen, which improves fines removaland reduces chamber wear costs.

The plant features rapid set-up time, a fuel-efficient directdrive system and excellent output potential of up to 352 tonsper hour (320 tph). The plant features a recirculating con-veyor, which rises for transport, allowing more ground clear-ance under the machine when moving on site and loading fortransport. A main feature of the Trakpactor 320SR crusher is

About the AggreSand SystemKey features of the AggreSand System

include:

• H 12 HopperTWS designed a new modular hopper feed-

er with 12 square meter capacity in keepingwith ever increasing loading shovel sizes intoday’ s modern quarries and sand pits. TheH 12 is available with a remote-controlled tip-ping grid.

• Feed ConveyorThe wide feed conveyor has a direct drive

electric motor and gearbox arrangement andwill work at a 19-degree angle when feedingthe AggreSand system. The inclined feed con-veyor features an innovative sealed wash boxat the discharge point to give material a pre-rinse to pre-condition for screening. Thisdesign eliminates splashing at this point andproduces an even distribution of material tothe full width of the rinsing screen thus utilizingthe full screening area.

• 165R-3 Rinsing ScreenTWS opted for the highly efficient 165R-3

(three-deck, two-bearing) rinsing screen. Thescreen’ s riveted construction reduces thestress associated with welded constructionmethods. TWS engineers designed this in sucha way to isolate the spray bars from all vibra-tion, utilizing rubber gators on the mid andbottom decks. Top deck rubber extensionsalso prevent overspill or splashing from thetop deck screen. The 165R-3 gives a true 80sq. ft. (7.54 sq m) of screening area on allthree decks. Each deck has eight individuallycontrolled spray bars fitted with polyurethanefan type spray nozzles. An advancedrolling chute arrangement gives the ability toblend top-deck and mid-deck overflows aswell as mid-deck and bottom-deck overflows,which will prove very useful in constructionand demolition recycling applications. Thescreen is designed to receive standardpolyurethane modular screens (woven wirescreens option also available) on all decks.

• Sump TankThe large capacity split sump tank receives

the rinsed fines from the bottom deck screeninto either a course or fine compartment. Thecourse side of the tank has a built-in float sys-tem to help equalize the levels in both tanksand prevent overflowing. Large inspectiondoors are included in both tanks as well asbutterfly valve drains on both sides. The tankalso is fitted with anti-turbulence plates and apump protection system.

• Centrifugal Slurry Pumps andHydrocylones

Two centrifugal slurry pumps (course andfine) are used to pump material from bothsides of the sump tank into two hydrocyclones.The hydrocyclones remove silts and clay(material below 63 micron), which are sent tothe water treatment plant. The heavier materi-al (above 63 micron) exits the bottom of thehydrocyclones into a rubber-lined box whereblending can take place if required.

• 125 Dewatering ScreenThe underflow from the hydrocyclones trans-

fers onto a dewatering screen via a dischargebox, which equally distributes the materialacross the screen to increase the dewateringscreen area. Both materials are dewateredover a 500 micron polyurethane screen toproduce two instantly salable grades of sand.The high-energy dewatering screen is fittedwith two high efficiency counter rotating vibra-tory motors, which remove capillary water toproduce two dewatered sands. The rubber-lined catchbox under the dewatering screencarries the underflow back to the tank forrecirculation through the cyclones.

Carolina Sunrock’ s plant had a 146 dewa-tering screen instead of the standard 125dewatering screen and it also had biggerhydrocyclones.

• Integrated ConveyorsThe AggreSand system has the option of

five conveyors, three aggregate and twosand. The 650 mm wide conveyors are pow-ered by direct drive electric motors and gear-box arrangements. The 9.3 meter long con-veyors are angled at optimum height for excel-lent production. The two conveyors have aunique automated radial wheel drive systemthat increases stockpiling capacity to a 350cubic meter. The conveyors are fitted with highquality teardrop polyurethane scrapers. Theaggregate oversize conveyor has a novel fea-ture whereby it can be placed on either sideof the machine in accordance with the cus-tomer’ s site set-up/preference. The 4 meterstockpile height of these conveyors make themideal for producing generous stock piles orfeeding other equipment within the Terexproduct range.

• Accessible Service AreasThere are 600 mm wide access platforms on

both sides of the machine. This allows easyaccess to both the rinsing and dewateringscreens. All walkways and handrails are gal-vanized as standard with curved ends andexpanded metal floors.

The 1.5 in. (3.8 cm) minus material is fed into the TerexAggreSand machine and three clean gravels and twosands are produced.

POWERSCREEN from page 39

see POWERSCREEN page 48


Visit Us At Booth 602


Demolition & Recycling

2005 Liebherr A924B MH 40 ft Max Reach (2piece) Material Handling front, Hydraulic ElevatingCab w/ Heat & A/C, Dual Solid Tires, Outriggers x4,and 10 kw Generator Set. Includes 5 tine Cat GSH22Orange Peel grapple with 360 rotation. Machine isclean, straight, tight, and in very good operating con-dition. FOB our yard in Summerville, SC ........$139,500

2006 Hitachi ZX270LC-3 with 5207 hours andCab Guarding, Very Good U/C, Equipped w/ factoryrebuilt LaBounty MSD50 Series III #50800 StraightMobile Shear. Through shop and work ready. Genesisfactory warranty on MSD50 shear....Call for Price.

2010 Cat M322D MH #W2T05047, DeliveredNEW in 2011, 3847 Hrs, Hydraulic Elevating Cab,FOPS Cab Guarding, Heat & A/C, 41’ MaterialHanding Front, Drop Nose Stick, 12.5 kw Gen Set,Cat GSH15-5 3/4 yd3 Grapple w/360 rotation (FullyInstalled), Dual Solid Tires, Rear Camera System, andOutriggers x4. Cat Dealer Maintained Since Neww/Service History Report Available. ExcellentCondition & Appearance ..................Call for price.

2005 Liebherr A934B MH 9670 total hrs, 50 ftMax Reach Material Handling Arrangement, Drop NoseStick, Hydraulic Elevating Cab, Heat & A/C, AutomaticLubrication System, Generator System for Magnet, andDual Solid Tires. Choice of several orange peel grap-ple options. Excellent all around condition and appear-ance. Checked through our shop and fully serviced.FOB our yard in Summerville, SC..............$189,500

1999 Liebherr A932 HD #361-5179,15,000 Hrs, Fixed Elevated Cab, MaterialHandling Front, Drop Nose Stick, 20 kw BeltDrive Generator, NEW Generator Controller,Recent Engine, Trans & Pumps by LiebherrDealer, Solid Tires. Good Overall RunningCondition for the Age & Hours. FOB Hanover, MD.................Call for Price.

QUALITY USED DEMOLITION & RECYCLING EQUIPMENT

WE HAVE ATTACHMENTS FOR YOUR EVERY NEED

1050 Drop Off Drive • Summerville, SC 29483 (843) 873-8333 after hours: (843) [email protected]

KUHNEQUIPMENT.COM

2003 Cat 330CL UHD 69’ Reach UltraHigh Demolition Front and Standard ExcavatorFront. Both Fronts are Quick Attach, BothFronts are Fully Piped for Rotating Tools, andBoth Come with Transport Stands. Machinehas a Tilt Cab, Heat & A/C, Heated Seat, and a Hydraulic Expanding/Contracting U/C ........................................................Call for Price.

2006 Hitachi ZX270LC-3 with 6600 Hrs,Cab w/Heat & A/C, Cab Guarding, Very GoodU/C and Equipped w/ LaBounty MSD2000RSaber Series Mobile Shear w/360 Rotation.Less than 250 Hour Use Since Complete Rebuild of Shear and All Components. ThroughShop and Work Ready. ........................................................Available for Sale or Rent.

Shears Pulverizers Processors Grapples Generator Sets


www.superior-ind.com

KING OF THE HILL

At Superior, we’re constantly searching for new ways to use our knowledge of bulk material handling systems to solve challenges and improve production. We’re driven by curiosity, loaded with determi-nation and energized by progress. How can we help you?

500 World Commerce PkwySt. Augustine, FL 32092

904-737-7730

390 SW Ring Ct.Lake City, FL 32025386-755-3997

3425 Reynolds Rd.Lakeland, FL 33803

863-606-0512

6200 North U.S. 301/441Ocala, FL 34475352-735-2800

9901 Ringhaver Dr.Orlando, FL 32824467-855-6195

415 Community College Pkwy SEPalm Bay, FL 32909

321-952-3001

14300 Ponce De Leon Blvd.Brooksville, FL 34601

352-796-4978

401 North Tomoka Farms Rd.Daytona Beach, FL 32124

386-947-3363

4900 North Main St.Gainesville, FL 32609

352-371-9983

330 Pecan Park Rd.Jacksonville, FL 32218

904-714-2600

32000 Blue Star HighwayTallahassee, FL 32343

850-562-2121

10421 Fern Hill Dr.Tampa, FL 33578813-671-3700

Open Days Prove SuccessfulShowcasing Terex Aggresandthe quick-detach post-screen section thatconverts it to a standard Trakpactor 320 unit. “We were very happy with the success of

our recent open days here in NorthCarolina,” said Mark Keenan, sales managerof Terex Washing Systems and Matec prod-uct lines of Powerscreen Mid-Atlantic Inc.“It gave us a great opportunity to showcaseour various machinery to our customer base.The main emphasis for the shows was theofficial U.S. launch of the Terex AggreSandand we think this machine will be very pop-ular in the U.S. market. The ease of set upand installation due to its modular designenables us to provide the customer with acomplete turnkey solution, which can bemoved from one site to another in a shortspace of time. We feel like Terex WashingSystems have really set themselves apartfrom the competition with the modular con-cept and look forward to installing theirproducts with many of our customers.”

About Powerscreen Mid-AtlanticPowerscreen Mid-Atlantic has been a suc-

cessful Powerscreen dealer for nearly 20years, having installed many wash plants

over that time. With the introduction ofTerex Washing Systems in 2012 for themobile and modular wash plant market,Powerscreen Mid-Atlantic’s portfolio ofwashing equipment has vastly increased. Powerscreen Mid-Atlantic Inc., based in

Kernersville, N.C., is a dealer for the follow-ing product lines: Powerscreen; TerexWashing Systems; Terex EnvironmentalEquipment; Terex Minerals Processing;Telestack; Matec; Lippmann; and MGLEngineering. These lines enable the compa-ny to provide a large selection of equipmentfor crushing, screening and washing ofaggregates and minerals, along with special-ty conveyors, loading systems, filter pressesand water treatment systems and C&D recy-cling systems. Powerscreen Mid-Atlanticprovides sales, rentals, service and parts sup-port for its products in North Carolina, SouthCarolina, Virginia and West Virginia.For more information, visit www.power-

screenmidatl.com.(This story also can be found on

Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)CEG

POWERSCREEN from page 44


Knoxville Headquarters6301 Old Rutledge Pk

East Knoxville, TN 37924(865) 546-1414

West Knoxville, TN • (865) 218-8800Chattanooga, TN • (423) 698-6943Kingsport, TN • (423) 323-0400Crossville, TN • (931) 484-4040Sevierville, TN • (865) 595-3750

BOBCAT OF JACKSONVILLE11657 Phillips HwyJacksonville, FL 32256www.bobcatjax.com

(904) 288-9181(904) 288-9182 Fax(877) 213-9408 Toll Free

of Jacksonville

STOWERS MACHINERY CORPwww.stowerscat.com


American Crushers & Screens, LLC.855-216-7625 www.americancrushers.comMike Andrews John Riley

336-455-1257 • [email protected] 336-210-0840 • [email protected]

NEW EQUIPMENT

Partners with CDE Global inNC, SC, VA, WV, TN AND KY

CDE Global manufacturers washing equipment for quarry, sand & gravel, and recycling industrieswith a focus on fines recovery systems. We are

the first partner in the US for CDE Global.

McCloskey International Dealer inNC, TN, Eastern KY

• We offer superior service along with local parts at competitive prices for all brand of mobile crushing and screening equipment. “We guarantee service.”

• We carry McCloskey International’s complete line of track conveyors

• Rentals Available

True 50” Wide Jaw Opening, Class LeadingCrushing Capacity, Forward and Reverse

Hydrostatic Drive, Tier 3 Caterpillar C-9 DieselEngine, Unrivaled Engine Accessibility,Closed Side Setting While Crushing,

Automatic Hydraulic Relief and Reset, HardoxLined Hopper and Feeder, Independent Pre-Screen For Maximum Fines Removal

McCloskeyJ50C JawCrusher

CDE Global, the leading supplier ofwashing equipment for the sand &gravel, quarry, and mining industries.CDE Global manufactures worldclass equipment for sand washing,manufactured sand washing, gravelscrubbing, lignite removal, specialistsands and water treatment industriesjust to name a few. Each of ourinstallations are engineered and customized to meet our customersexpectations. Whether you need astandalone fines recovery unit or afully engineered customized washingplant we can provide the solutions tomeet your expectations.

Closed Circuit Impact Crusher with Approx.125 Hrs, 4 Bar Rotor, 45” Wide Feed Openingwith Hydraulic Lifting Lid, Tier 3 CAT C-9 DieselEngine 350 HP, Hydraulic CSS, Optional 3rd

Apron with Ceramic Inserts, Quick DetachableScreen Module, Under Crusher Vibrating PanFeeder, Eriez Overband Magnet, Dirt Conveyor,Dust Suppression with Water Pump, 3 SpeedTracks, Hardox Hydraulic Folding Hopper

Wings and Hopper Extensions.

2012 McCloskey I44R

High Energy 20X5 Two Deck Screenbox, HydraulicScreen Angle Adjustment From 20 to 30 Degrees,

Caterpillar 127HP Tier 111 Diesel Engine, High CapacityVAriable Speed Feeder, Remote Controlled Crawler

Tracks Remote Controlled Tipping Grid

McCloskey S190 2D ScreeningPlant

We Rent Equipment

Equipment-Mounted Drills Offer Productive SolutionE-Z Drill’s Model 210 equipment-mount-

ed concrete drill attachment series consistsof three models: the three-gang Model 210-3 EQ MT, four-gang Model 210-4 EQ MTand five-gang Model 210-5 EQ MT. Theseries is compatible with most models ofbackhoes and excavators. The pneumaticdrills offer specially designed features formaximum productivity and reduced mainte-nance, making them practical for full-depthroad repair and patching projects, accordingto the manufacturer.A user-friendly, easily accessible control

panel is mounted on the drill to provide con-venient operation from the ground. The unitsare capable of drilling 5/8- to 2 ½-in. (1.6 to6.3 cm) diameter holes, at a depth of 18 in.(45.7 cm). Each individual drill motorrequires a minimum of 100 cfm (2.8 cum/min) for operation, with a minimum of300 cfm (8.4 cu m/min) required to powerthe smallest unit in the series, the three-gangModel 210-3 EQ MT. To reduce air com-pressor requirements, an optional 120-gal.air tank is available.Designed for quick, precise drill position-

ing, the 210 EQ MT drills feature a side-shift control. In contrast to similarequipment-mounted drills, the carrieroperator is not required to position theunit in the exact drilling location. Thedrill must simply be placed in closeproximity to the specified drilling area,then can be quickly and easily adjustedto the target location with a toggleswitch found on the control panel.The side-shift feature further

enhances productivity by allowing asecond set of holes to be drilled withoutthe need to move the drill, backhoe orexcavator, provided holes are specified on12-in. (30.5 cm) centers. Simply set the drillspacing at 24-in. (61 cm), drill one set ofholes, and engage the side-shift. The unitwill quickly and precisely move 12-in. todrill the second set, all without repositioningthe drill or carrier. Drill spacing is adjustableup to 24-in., and the drills offer lateral travelup to 14-in. (35.5 cm). To reduce operator effort and increase

hole-drilling speed, the drills feature a “float-ing” bucket curl pin. By providing the pin

with a small range of motion, the drill auto-matically levels itself, eliminating thetedious and time-consuming process ofmanually leveling and positioning the drillwith each movement. For added convenience and productivity,

the 210 EQ MT drills feature 360-degreerotation, which allows quick repositioningfor drilling within the same patch. Toenhance operator safety, the rotating featureincludes a safety swivel lock. With the sim-ple flip of a switch, the lock is activated and

the drill is secured into place, ensur-ing safe transport and preventingpotential harm to the operator.A number of features have been

incorporated into the 210 EQ MTdrills to enhance durability andextend service life. Multi-point oilinjection allows each drill to be lubri-cated individually from a singlereservoir, ensuring each drill alwayshas the proper amount of oil. Thisreduces wear on the motor and ismore effective than a central oilingsystem, which doesn’t offer individ-ual lubrication points. An automatic

drill shut-off further extends individual drilllife by preventing dry-firing. The 210 EQ MT drills offer extra height

adjustment, providing access to the center ofa slab, even in extreme asphalt overlay con-ditions. To offer a complete system, a fullline of drill bits and drill steel is available. For more information, call 800/272-0121

or visit www.ezdrill.com.(This story also can be found on


Blastcrete Attachment Features Hydraulic Squeeze PumpBlastcrete Equipment

Company, manufacturer ofconcrete mixers, pumps andrelated products, offers theModel RD6536 skid steerpump attachment. Featuringa universal design compati-ble with any skid steer, the3-in. (7.6 cm) hydraulicsqueeze pump is ideal forICF, block fill, form andpour, driveways, basementsand various shotcrete appli-cations.With the ability to pump grout

materials, 3/8-in. (.95 cm) shot-crete and 3/4-in. (1.9 cm) structur-al concrete mixes, the RD6536 is afast, efficient solution for contrac-tors performing a variety of con-

crete and shotcrete applications.The unit offers a variable speed of0 to 25 cu. yds. (0 to 19 cu m) perhour. Vertical pumping distancereaches 50 ft. (15 m) with the useof a rubber delivery line, while hor-

izontal distance can reachup to 250 ft. (76 m). A hydraulic agitator is

included in the receivinghopper. The agitator’s con-tinuous motion keeps themix well blended, ensuringaggregate and sand stayevenly suspended through-out the mix. Not only doesthis result in high-strengthconcrete, it keeps the aggre-gate and sand from settlingto the bottom of the hopper

and clogging near the suction area.To relieve pressure build-up

clogs and eliminate potential dam-age to the pump, the RD6536 canbe run in both forward and reverse.Hydraulically powered controls

are located on the pump and alsooperate both agitator and pumpspeed. The RD6536 weighs in at 2,700

lbs. (1,225 kg) and hydraulic oilrequirement is 18 gpm (68 Lpm) at3,000 psi. The 48-in. (122 cm)wide frame (55-in. [140 cm] withreceiving hopper) is designed to benarrow enough to fit between thewheel wells of most standard worktrucks. The unit includes forkliftpockets to allow quick and easyloading and unloading from thetransport vehicle.Maintenance requirements for

the RD6536 are simple and takejust minutes. The steel-constructedunit is designed to prevent anyconcrete from coming in contact

with the pump’s moving parts, fur-ther reducing maintenance con-cerns and ensuring a long servicelife. The primary wear part, therubber pumping tube, can be easilyreplaced on the job site in about 20minutes. And unlike other types ofconcrete pumps, cleanup on theRD6536 squeeze pump is fast andhassle-free. Using just water and asponge ball, the pump can becleaned out in approximately 5minutes.For more information, call

800/235-4867 or visit www.blast-crete.com.

(This story also can be found onConstruction Equipment Guide’sWeb site at www.constructionequip-mentguide.com.)

Pages 51-54For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

SECT IONAttachment & Parts

• January 8, 2014 • www.constructionequipmentguide.com • Attachment & Parts Section • Construction Equipment Guide

North American Attachments

800-380-8808www.excavator-attachments.com

Excavator Attachments

Skidsteer Attachments

Loader/Backhoe Attachments

Quality Construction Attachments

CompactionWheels

Ditching Cleaning BucketDrain Holes Optional

Dual ActionGrapples

Grapple Rakes Grapple Buckets Skeleton Buckets

Fork Carriages &FORKS

General PurposeLoader Buckets

Loader Rakew/Grapples

All Sizes... Manual &Hydraulic Thumbs

Dozer Rakes

HydraulicThumbs

Ripper Tooth Severe Duty & RockExcavator Buckets

Tree Stumpers Pin Grap Couplers

Learn more at

theTVboss.org

BE THE BOSSOF WHAT YOUR KIDS WATCH

Parental blocking controls not only prevent your kids from viewing mature content, but also allow you to decide what programs they can watch. Parental controls are available through your TV, cable or satellite provider.

Would you likeYOUR COMPANY

featured inConstruction

Equipment Guide?

If so, please contact us:

470 Maryland Drive,Fort Washington, PA 19034

800/523-2200

Construction Equipment Guide • Attachment & Parts Section • www.constructionequipmentguide.com • January 8, 2014 •

• January 8, 2014 • www.constructionequipmentguide.com • Attachment & Parts Section • Construction Equipment Guide

Whatever Your Application: RECYCLING • LOGGING • CONSTRUCTION • AQUATIC • WASTE HANDLING • DEMO • SCRAP • ROAD & BRIDGEWe Have Your Attachment: GRAPPLES • BUCKETS • CRUSHERS • SHEARS • FORKS • CUSTOM ENGINEERING

CLICK OR CALL TODAY! PEMBERTONINC.COM • 1-800-393-6688

No matter what your material, Pemberton has the bucket, grapple or forks to handle it and we can fit it to your specific wheelloader or excavator. We have the attachment you need for construction, demolition, logging and scrap material or waste handling.

Contact Pemberton today to see how we can help you maximize your equipment and your manpower.

Got MATERIALSto Move?

PROVIDING SUPERIOR PRODUCTS & SUPPORT SINCE 1996

ASK ABOUT OUR BREAKER AUTOLUBE SYSTEMS!


And Your Hitachi Dealers

9550 Statesville RoadCharlotte, NC 28269

704/597-0211Fax 704/596-6198

101 Bruce Rd.Asheville, NC 28806

828/667-0176Fax 828/667-4865

411 South Regional RoadGreensboro, NC 27409

336/668-2762Fax 336/668-3714288 Westgate Drive

Wilkesboro, NC 28697336/973-8201

Fax 336/973-8496305 N. Main St.

Mt. Gilead, NC 27306910/439-5653

Fax 910/439-4568

380 Anderson Road HighwayRock Hill, SC 29730

803/325-1555Fax 803/325-1506

2421 US Highway 64 EastAsheboro, NC 27203

336/625-2212Fax 336/625-0738

2725 Old Monroe RoadMatthews, NC 28104

704/821-7399Fax 704/821-4915805 Klumac Road

Salisbury, NC 28144704/636-2671

Fax 704/633-4827

11047 Leadbetter Rd.Ashland, VA 23005

804/798-6001Fax 804/752-7111

1711 E. Hundred Rd.Chester, VA 23836804/748-9324

Fax 804/530-1930Route 360 & 460

Burkeville, VA 23922434/767-5578

Fax 434/767-37743902 W. Main St.Salem, VA 24153540/380-2011

Fax 540/380-5547

98 Expo RoadFishersville, VA 22939

540/337-3057Fax 540/337-1495287 Victory Road

Winchester, VA 22602540/667-9777

Fax 540/667-94419107 Owens Drive

Manassas Park, VA 20111703/631-8500

Fax 703/631-47152055 South Boston Road

Danville, VA 24540434/822-6110

Fax 434/822-6055

Carolinas’ Division

Virginia Division

504 South Military Hwy.Virginia Beach, VA 23464

757/424-1900

333 Freedom Blvd.Yorktown, VA 23692

757/898-1900

Coastal Equipment Corpwww.coastalequipment.net

Residential Construction Drives JobsCalifornia, you can’t even find enoughworkers But when you get into thatcentral valley, it’s still kind of sleepy.”Other states reporting good news

include Connecticut with an 11 percentincrease, Missouri, at 9.8 percent, andGeorgia, which added, 13, 200 jobs.“Connecticut is a bit of a surprise,”

Turmail said. “New England — out-side of Boston — has had a harder timegetting into a recovery.”Montana also was a surprise, but not

a good one, Turmail said. Constructionmanagers report work is good, with alot of new construction activity on theeast side of the state. But the data, asreported by the Labor Department,indicates the state is still losing con-struction jobs.For the month, 30 states added con-

struction jobs, 16 lost jobs, whileemployment stayed steady in fourstates. The biggest driver of the jobs was

residential construction, both in the sin-gle- and multi-family markets. Activityin the energy sector was also up, aswas, surprisingly, the lodging industry.

“There was a lot of renovation offacilities,” Turmail said. “In 2006through 2008 when money was verycheap, there was a lot of hotel con-struction. There was so much overbuilthotel capacity. What we’re seeing nowis either hotel owners upgrading or put-ting money back in and renovatingthem and keeping them competitive asopposed to building new hotels fromscratch.”But all that good news is under-

mined by declines in other areas, likeretail and office space. The trendtoward on-line retailing has dampenedthe demand for new retail space, whileteleworking is shrinking the footprintfor office space and will weakendemand for new space even as employ-ers add employees.There also was a surprise spike in

public spending, but analysts don’texpect to see that again. On the con-trary, public spending has been trend-ing down. “The federal government is not

pumping as much money into publicworks,” Turmail said. “State and localspending will continue to be weak, but

as the economy improves you will seea lot more municipal spending. You canexpect to see increased construction inschools, fire departments and policestations, but that’s probably later nextyear.” The ACG again urged Congress and

President Obama to finalize waterresources legislation and to act swiftlyto renew long-term highway and transitlegislation.“At this point, it is hard to predict

whether construction employment willcontinue to expand in many states nextyear,” said Stephen E. Sandherr, theassociation’s chief executive officer.“Passing vital infrastructure measureswill help protect construction employ-ers from any softening in private sectordemand, while giving the economy aneeded boost.” For the ranking of each state, visit

http://www.agc.org/galleries/default-file/State%20Empl%20201311%20rank.pdf.

(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.) CEG

JOBS from page 1

Mike Rhoda, a construction and industrial equipmentexecutive with extensive international experience in market-ing, operations, product development and sales, has beennamed chief executive officer ofSany America Inc. He replacesTim Frank, who resigned as chair-man in October.As CEO, Rhoda has overall

responsibility for manufacturing,sales, marketing and support forall Sany equipment products inthe United States, Canada,Mexico and Central America.“Mike Rhoda has more than

two decades of directly relevantexperience in the off-highwayequipment sector, including workin Asia and emerging markets,”said Liang Wengen, chairman ofthe board of Sany Group, based inBeijing, China. “Mike’s strategicexpertise and record of accom-plishment will serve Sany well aswe continue to grow our presenceand further establish our brand as a market leader in Northand Central America.”“I am honored that the Board has selected me to lead Sany

America and the dedicated and talented group of employeeswho work here,” Rhoda said. “We will build on the compa-ny’s recent successes, which include a significant expansion

of our dealer network, as well asgrowing sales and profit in thisimportant market. Sany is the fifth-largest manufacturer of constructionequipment in the world, and has agreat reputation in China for prod-uct support and service. We intendto work hard to ensure that everySany customer here can count onexcellent support as well.”Prior to being named CEO,

Rhoda was chief technology officerof Doosan Infracore ConstructionEquipment. He also served at VolvoConstruction Equipment as vicepresident of product development,and then president and CEO of theexcavator business line. Rhoda pre-viously served in various seniormanagement positions at IngersollRand.

For more information, visit www.sanyamerica.com.(This story also can be found on Construction Equipment


Industry Veteran Rhoda Replaces Frank as New CEO of Sany America

Mike Rhoda has been named chief execu-tive officer of Sany America Inc. As CEO,Rhoda has overall responsibility for manu-facturing, sales, marketing and support forall Sany equipment products in the UnitedStates, Canada, Mexico and CentralAmerica.


Flint EquipmentCompany

1206 Blaylock St. Albany, GA 31705

229/888-1212Fax: 229/435-3612

180 Princeton Blvd.Adairsville, GA 30103-2628

770-773-9857Fax: 770-773-7226

4500 Wendell Dr. SWAtlanta, GA 30336-1627

404/691-9445Fax: 404/696-1170

5333 BBS WayBraselton, GA 30517-1707

770-965-1889Fax: 770-965-1894

251 Perry Lane Road Brunswick, GA 31525

912-264-6161Fax: 912-264-5263

2400 Victory Dr.Columbus, GA 31902-3457

706/687-3344Fax: 706/682-4738

515 Chamblin Rd. Grovetown, GA 30813-3905

706/855-5440Fax: 706/855-5447

136 Acres DriveLadson, SC 29546

843/572-0400Fax: 843/572-7746

4600 Pio Nono AveMacon, GA 31206-5064

478/788-1586Fax: 478/781-8591

7566 W. Tennessee St. Tallahassee, FL 32304

850/575-5600Fax: 850/575-9972

3033 US Highway 27 East Perry, FL 32348850/584-9200

Fax: 850/584-2844

169 Ross Clark Circle N.E. Dothan, AL 36303

334/794-8691Fax: 334/794-8696

50 Morgan Industrial Blvd. Garden City, GA 31408

912/964-7370Fax: 912/964-1822

1220 Henderson HWY Troy, AL 36081 334/566-4181

Fax: 334/566-4361

4900 East Highway 501 Aynor, SC 29511

843/358-5688Fax: 843/358-2826

116 Corporate Drive Simpsonville, SC 29681

864/963-5835Fax: 864/963-7405

4717 Jefferies Hwy Walterboro, SC 29488

843/539-1420Fax: 843/539-1424

3464 Sunset Boulevard West Columbia, SC 29169

803/794-9340Fax: 803/794-9346

178 Seaboard RoadAndrews, SC 29510

843/221-4940Fax: 843/221-4942

1128 Hwy 70 WestGarner, NC 27529

919/772-2121Fax 919/779-5432

3604 Highway 264EGreenville, NC 27834

252/758-4403Fax 252/758-6508

3816 Martin Luther King BlvdNew Bern, NC 28562

252/638-5838Fax 252/638-2949

5039 US 301 SouthFayetteville, NC 28348

910/424-1200Fax 910/424-8763

Northside Industrial ParkWilmington, NC 28429

910/675-9211Fax 910/675-3640

Highway 42 Aulander RoadAhoskie, NC 27910

252/332-5550Fax 252/332-4186

EquipmentCompany


SANY America Inc.318 Cooper Circle, Peachtree City, GA 30269Tel: 678-251-2869 | Fax: 770-632-7820Email: [email protected]

MORE. DIGGING. EFFICIENCY.OPTIONS.

.

Inc. America SANYcle, Peachtr318 Cooper Cir

el: 678-251-2869 TTel: 678-251-2869 | Fax: 770-632-7820Email: [email protected]

, GA 30269ee Citycle, Peachtr Fax: 770-632-7820

Email: [email protected]



EARTHMOVER CONSTRUCTIONEQUIPMENT LLCA Division of Advantage

Construction Equipment &Parts

8451 SW Old Kansas Ave.Stuart, FL 34997407-401-8956

www.constructionequip.com

INTERNATIONALIRON

1920 Boothe Circle, Suite230

Longwood, FL 32750407-809-5856F407-347-4664

www.intiron.com

GRANITE MOUNTAIN

MACHINERY2101 Plunkett Road NW

Conyers, GA 30012770-929-8287888-413-9145

www.granitemountainmachinery.com

HAWKINS-GRAVES,INC.

13432 Wards Rd.Lynchburg, VA 24501

434-847-7703866-847-7703

www.hawkinsgraves.com

RICHARDSONSERVICE 1991 INC.

2667 U. S. 378,Conway, SC 29527

843-397-2050www.rs91inc.com

TAR HEEL MACHINERY

165 Sommerville Park Rd.Raleigh, NC 27603919-773-1425www.tarheel

machinery.com


With over 100 years of experience and a commitment to speed, Terex Cranes focuses on getting the job done, aiming at maximum uptime and a high return on investment. Because your results are what really matters.

Contact our distributors and find out how we can help to improve your bottom line.

Authorized Terex Cranes Distributors

All rights reserved. Terex is a registered trademark o

For Your Local Terex Dealer, Please Contact: Terex USA, LLC, 106 12th St. SE • Waverly, IA 50677 USAPhone: (319) 352-3920 • Fax: (319) 352-9395

email: [email protected]: www.terex.com/cranes

MARYLAND4601 Washington Blvd.Baltimore, MD 21227

410-242-6500VIRGINIA

160 Kentmere CourtWinchester, VA 22603

540-722-3700

1345 Mountain Rd.Glen Allen, VA 23060

804-266-00004112 Holland Blvd.

Chesapeake, VA 23323757-485-3314

8450 Quarry Rd.Manassas, VA 20110

703-393-7344

2025 Cook DriveSalem, VA 24153

540-989-3750808 Norton Rd.

Wise, VA 24293276-328-8027

DELAWARE17941 Sussex HighwayBridgeville, DE 19933

302-337-3400NORTH CAROLINA3908 N. Graham St.Charlotte, NC 28206

704-509-2728

MCCLUNG-LOGAN EQUIPMENT COMPANY INC.R T- T- HC/CC- AT- B T

www.mcclung-logan.com

DOZIER CRANE(RT-T-HC/CC-AT-BT)

www.doziercrane.com

155 Pine Barren RoadPooler, GA 31322

912-748-2684Fax: 912-748-5361


Beloved Leader of J.M. Wood Passes Away at Age 65J.M. Wood Auction Co. Inc. — a 40-year-

old Montgomery, Ala., fixture that’s nowamong the largest auction firms in the country— lost its beloved leader, Brenda Wood, onDec. 22. A Montgomery native (and great-great-

granddaughter of Confederate AdmiralRaphael Semmes) Mrs. Wood graduated fromSidney Lanier High School and earned a homeeconomics degree at Auburn before she mether husband, the late Malcolm Wood. He hadgrown up in west Montgomery, selling pro-duce door-to-door for his family farm, whichraised fruit, vegetables and cattle.Together the pair founded J.M. Wood. Mrs.

Wood handled the books and the office whileher husband hit the road to meet contractorsand farmers to see what equipment they need-ed for jobs and to see what they wanted to sellor trade. An unexpected turn of events came about

that would not only affect the company but theWood household, as well. At an auction inGeorgia in 1989, Mr. Wood started complain-ing of pains, and soon after he was diagnosedwith an advanced form of colon cancer. A meresix months later, at 46 years of age, Mr. Woodpassed away.Mrs. Wood was faced with one of the hard-

est decisions of her life. What was she to do

with the company and employees who hadbeen with them for years?Before Mr. Wood passed away, he urged her

to give up the auction business. But as she toldit, he knew that she was stubborn and would-n’t take his advice, so he instructed her to put$50,000 of their life’s savings into the busi-ness. He told her, “If you lose it, walk away.”Mrs. Wood’s contributions paid off. Today

J.M. Wood is the fourth largest privatelyowned machinery auction company in theUnited States. It auctions heavy machinery atpermanent facilities in Montgomery and inColumbia, S.C. and handles on-site auctionsfor the Alabama Department of Transportationand many other DOT and government agen-cies across the Southeast.Mrs. Wood is survived by her long-time

companion William Roger North; Children:Kimberly Wood Cox, Bryant Semmes Wood,Ruston Ryan Wood Sr. and Robin AlexanderWood; Grandchildren: Shelby, Sarah Beth, andAubrey Cox, Katie Brooke and Lauren Wood,Ruston and Watson Wood.

This article was written by Christina M.Caldwell and published in Business Alabama.It has been edited for reprint in CEG.

(This story also can be found on ConstructionEquipment Guide’s Web site at www.construc-tionequipmentguide.com.)Brenda Semmes Wood, 65, of Montgomery, Ala., passed away on Dec. 22.

Activity Trends PositivelyEFI) for December is 55.8, a decrease fromthe November index of 56.9, reflectingindustry concerns over uncertainty regardingcapital expenditures (capex) and competitivemarket pressures in 2014, among otherissues.ELFA President and CEO William G.

Sutton said: “Overall new busi-ness activity in the equipmentfinance sector continues to trendpositively, despite some soft-ness in November compared tolate-summer and early-fall per-formance. Year-to-date volumealso is encouraging as we headinto the final month of the year,which is typically a strong peri-od for the sector. Fiscal pres-sures seem to be dissipating aswell with the U.S. Congressagreeing on a two-year budget,which should lessen the chance of anypotential government shutdown and providea measure of comfort to U.S. businesses try-ing to make planning decisions for the com-ing year and beyond. Credit quality contin-ues its strong showing, notwithstanding aslight uptick in November delinquencies.”Christopher Enbom, CEO and chairman,

Allegiant Partners Incorporated, said, “Thecontinued growth in equipment finance fromthe previous year shows continued strengthin the economy and in equipment spending.The numbers are especially good consider-ing the fact there were fewer working days inNovember 2013 than 2012. We are expect-ing a strong 2014 in the small company seg-

ment we serve. The budget deal is increasingstability and has boosted our forecast fornext year.”For more information, visit www.elfaon-

line.org.(This story also can be found on


SURVEY from page 1

“The continued growth in equipmentfinance from the previous year showscontinued strength in the economyand in equipment spending.”

Christopher EnbomAllegiant Partners Incorporated

Corporate Responsibility…

Hyundai Heavy Sends Aid toPhilippines Typhoon VictimsHyundai Heavy Industries Group,

Hyundai Construction Equipment’s parentcompany, recently made a donation of$200,000 via the Korean Red Cross in thewake of Typhoon Haiyan, which caused cat-astrophic damage to the Philippines. Thecompany also dispatched a21-ton class excavator, abackhoe loader and experi-enced operators to the area toassist in recovery efforts.“We express our deep

condolences to the victimsof the typhoon,” said LeeJai-Seong, Hyundai Heavy’spresident and CEO. “Wewill provide as much assis-tance as we can in order tohelp the victims reclaim theirnormal lives.”As a responsible corpo-

rate citizen in the countriesHHI operates in, this aid

effort is in line with the support rendered forseveral other recent natural disasters inBrazil, Japan, China and Haiti.

(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)

Hyundai Heavy Industries Group dispatched a 21-tonclass excavator, a backhoe loader and experiencedoperators to the area to assist in recovery efforts.


Introducing the new Kubota KX080-3.This 8-ton, utility-class excavator is the next big thing in Kubotaexcavators. With a Kubota Tier II compliant diesel engine, theKX080-3 is powerful enough to handle the toughest diggingsituations, yet small enough to maneuver in tight work conditions.•64 HP•15-foot digging depth•18,254 lbs. operating weight•14,660 lbs. bucket breakout force

Completely new...still a Kubota.

Unearthing a whole new utility class.

©Kubota Tractor Corporation, 2007

www.kubota.com

GROWERS EQUIPMENT CO.2695 Davie RoadDavie, FL 33314954-916-1020

www.growersequipment.com

CHARLOTTE TRACTOR1700 Starita Road

Charlotte, NC 28206704-596-8900

www.charlottetractor.com

DITCH WITCH OF TENNESSEENashville

140 Charter PlaceLaVergne, TN 37027

615-793-7576

Knoxville10732 Dutchtown Road

Knoxville, TN 37932865-970-2840800-445-4814

www.ditchwitchtn.com

GREENSBORO TRACTOR2820 S. Elm-Eugene Street

Greensboro, NC 27406336-273-3606

www.greensborotractor.com

FUTCH’S TRACTOR DEPOT, INC.

8515 SR 207 N.Hastings, FL 32145

904-692-3673www.futchstractordepot.com

9775 W. Boynton Beach Blvd.Boynton Beach, FL 33472

561-369-0414F561-369-1282

www.floridacoasteq.com

15900 Westpark LaneFt. Pierce, FL 34945

772-461-1003F772-461-1007

694 Commercial Blvd.Naples, FL 34104

239-435-1667F239-435-9153

CAHABA TRACTOR CO.Hwy 31 South

Pelham, AL 35124205-663-1470F205-663-1485

www.cahabatractor.com

TUSCALOOSA TRACTOR, INC.3921 Skyland Blvd. ETuscaloosa, AL 35405

205-553-8573F205-554-0431

www.tuscaloosatractor.com

FLORIDA COAST EQUIPMENT


Authorized Doosan Dealers

ALABAMARental, Inc.

Dothan334-984-2444

www.rentalinc.net

ARKANSASAlma Tractor & Equipment Inc.

Alma479-632-6300

www.almatractor.com

FLORIDABobcat of Jacksonville, LLC

Jacksonville904-288-9181

www.bobcatjax.com

Bobcat of OrlandoOrlando

407-273-7383www.cfbobcat.com

Bobcat of Tampa, LLCTampa

813-626-3470www.cfbobcat.com

GEORGIABobcat of Savannah

Bloomingdale 912-236-5588

www.bobcatops.com

Cowin Equipment Company, IncMableton

404-696-7210www.cowin.com

MISSISSIPPIH & E Equipment Services, Inc.

Jackson601-373-0444

www.he-equipment.com

NORTH CAROLINAH & E Equipment Services, Inc.


Fletcher828-684-1692

Garner919-781-9454

Winston-Salem336-767-6900

www.he-equipment.com

SOUTH CAROLINAH & E Equipment Services, Inc

Columbia803-776-8465Greenville

864-272-2600www.he-equipment.com

TENNESSEEBobcat of Nashville

La Vergne615-941-4000

www.bobcatofnashville.com

H & E Equipment Services, Inc.Memphis


VIRGINIAH & E Equipment Services, Inc

Ashland804-798-9740Chesapeake757-295-4944

Roanoke540-362-3600Warrenton


A NAME YOU CAN’T FORGET. PRODUCTS YOU CAN’T IGNORE.

Doosan and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. ©2014 Doosan Infracore Construction Equipment America. All rights reserved. | 1213982

If you want to do more, there are two simple syllables you need to remember. Doosan. Doosan delivers performance, productivity, durability, comfort and easy maintenance in all of its machines. When you look into our products and our committed dealer and support networks, you’ll know that we’re up for your biggest, toughest jobs. Stop into our dealership to experience for yourself what these machines can do. You’ll never forget it.

Doosan DeliversDoosanEquipment.com/CantIgnore11

pmeiu Eq &rrotcar TamlAASSNAKRA

ten.clinatner.www44424-984-33

anhtoDc. In,latneRAMAABAL

tbbf734-62-6318

apmTapmaf Tt oacboB.ctacbobf.cwww873-732-704

odanlrOal Orf otacobB

c. Intnpme

anoso DdzeirohtuA

tnpmeiu Eq E &H CAHTNOR

ipmuqe-eh.www-73-3106skacJtnpmeiu Eq E &H

SSISIM

07

CL, Lapmo.c

38

ndoa

sreale Dan

e-eh.www-2468erG-038olumCmpiuqH & E EHTUOS

c. Insceivre SttANIOLR CA

moc.tneipm4440-

nosc. In,sceivre Stt S

PIPSI

7C80

uqH & E E

moc.tneipmuqe006-227-2

eillvnee65486-77aibolum

cn, Isecivret SnemANIOLR CA

kenoaoR4494-5927-57ekeapasehC047998-74-80

dnahlsAcn, Isecivret Snempi

AIINGIRV

moc.axjtacbob.www1891-882-409eillvnoskcaJ

llivnosck Jaf ott ocabBoAIDROLF

o.cortcartalma.www003-623-6974

amlApmeiu Eq &rr &otcar TamlA

ocin.owc.www12-7696-404

notbleaM Cotnpmeiu EqniwCo

spotacobb.www855-362-219

dagnimoolBaav Sf otacboB

AIGREOG.ctacbobf.cwww

m

CL Le,l

m

c. Intnpme

ipmuqe-eh.www7-67-633

n-tosniW1-8-7919nraG4-868-28chteFl405-470olrahCtnpmeiu Eq E &H

mo01

c In,ynpam Coomc.s

88elda

hannaA

mo.c

e-eh.www-190eM

pmeiu Eq E &Hacobb.www-516

a VLtacboBNNEET

moc.tneipm00967-melaSn-

45491-ren

92614-rech7082-

ettoc. In,sceivre Stt S

.www54

5

moc.tneipmuqe2904-573

shipmec. In,sceivre Stnpme

omc.ellivshanfota0004-149engrea V

eillvhsa Nf oESESNNE

moc.tneipmuqe-eh8782-934-054

notnerrWa006-326-3045

kenoaoR


COWIN EQUIPMENT COMPANY, INC.Birmingham, AL • 800-239-2694

Mobile, AL • 800-223-6755Montgomery, AL • 800-239-6642

Madison, AL • 256-350-0006Huntsville, AL • 800-239-7368Oxford, AL • 800-917-7931

Pensacola, FL • 800-239-4736Atlanta, GA • 800-849-3540

QUEST CONSTRUCTION EQUIPMENT LLCwww.questequip.com

New Orleans (St. Rose), LA • 888-892-6066Baton Rouge (Gonzales) • 225-450-6425

CLM EQUIPMENT CO., INC.Broussard, LA • 337-837-6693Sulphur, LA • 337-625-5942Baytown, TX • 281-385-6633

GS EQUIPMENT INC.Tampa, FL • 866-586-8956

Ft. Lauderdale, FL • 954-327-8808Ft. Myers, FL • 239-334-6063

GREAT SOUTHERN CONSTRUCTION EQUIPMENTOrlando, FL • 407-859-9160

Jacksonville, FL • 904-268-4400

CUMBERLAND TRACTOR & EQUIPMENTNashville, TN • 866-902-7800

LINK-BELT MID ATLANTICAshland, VA • 866-955-6071

Chesapeake, VA • 800-342-3248

FINLEY LLCDiv. of Heavy Machines Inc.www.heavymachinesinc.com

Gray, TN • 855-201-7453

Memphis, TN • 888-366-9028Shreveport, LA • 318-621-0854

CCS EQUIPMENT SALESwww.ccsequipment.com

Raleigh Durham • 877-469-3471

MAYHEAVY-EQUIP RENTAL & SALESwww.mayequip.com

Lexington, NC • 866-629-3784Columbia, SC • 888-865-1002

SCOTT-GALLAHER INC.www.scott-gallaher.com

8071 Lee Hwy. • Troutville, VA 24175540-992-4560

> > >

Kennesaw, Georgia 30144www.kawasakiloaders.com

AN E.P.I.C. GENERATIONEFFICIENT

POWERFUL

INTELLIGENT

COMFORTABLE

Kennesaw, Georgia 30144www.kawasakiloaders.com

eor kilo

Visit Us At

Exhibit# 40042


Albany, GA229/888-1212

Adairsville, GA770/773-9857

Atlanta, GA404/691-9445

Grovetown, GA706/855-5440

Columbus, GA706/687-3344

Macon, GA478/788-1586

Brunswick, GA912/264-6161

Savannah, GA912/964-7370

Perry, FL850/584-9200

Tallahassee, FL850/575-5600

Troy, AL334/566-4181

Dothan, AL334/794-8691

West Columbia, SC803/794-9340

Simpsonville, SC864/963-5835

Aynor, SC843/358-5688

Ladson, SC843/572-0400

Andrews, SC843/221-4940

Walterboro, SC843/539-1420

FLINT EQUIPMENT COMPANY

DON ALLISON EQUIPMENT, INC.233 Melville Road Arley, AL 35541

800-669-6450205-387-1600

Fax: 205-387-1668

Ridenour Set to Retire FromLiuGong North America

LiuGong announced Fred Ridenour’sretirement from LiuGong North America onDec. 31, 2013. Ridenour has devoted 40years of his life to the construction industryperforming in a varietyof roles, including con-struction equipmentsales and marketing, dis-tribution and credit at themanufacturer level, withexperience progressingfrom district sales man-ager in the northeasternUnited States, to prod-uct, marketing, sales,finance and credit man-agement on a NorthAmerican level.

Ridenour has repre-sented multiple manu-facturers during hiscareer before LiuGongNorth America. His product experienceincludes conventional and hydraulic cranesmounted on crawler tracks, rubber tires andpedestals, hydraulic excavators ranging

from 2 to 85 tons (1.8 to 77 t), wheel loadersranging from 1 to 7 cu. yds. (.7 to 5.3 cu m),as well as compaction, skid steer, tractorloader backhoes and Diesel Pile hammer

product lines.Before joining

LiuGong full-time,Ridenour worked forLiuGong on a consultingbasis for three years. In2010, he joined LiuGongNorth America as theGM of BusinessOperations.

“Fred’s contributionsto our industry and to theinitial growth atLiuGong have beentremendous,” statedMarc Dowdell, presidentof LiuGong NorthAmerica. “He is a true

professional and will be missed.”(This story also can be found on


“He is a trueprofessional andwill be missed.”

Marc DowdellLiuGong North America


Built from a lineage of market leaders for over 60+ years

FLORIDANORTRAX

www.nortrax.comTampa

(813) 635-2300Orlando

(407) 299-1212Pompano Beach(954) 977-9541

Riverview(813) 621-4902

Sarasota(941) 752-1300

Fort Myers(239) 334-3627

Lutz(813) 995-0841

Miami(305) 592-5740

THOMPSON TRACTOR

www.thompsontractor.com

Pensacola, FL(850) 471-6710

FLINT EQUIPMENT CO.www.flintequipco.com

Perry(850) 584-9200Tallahassee

(850) 575-5600

VIRGINIAJAMES RIVEREQUIPMENT

www.jamesriverequipment.com

Danville(434) 822-6110

Fishersville(540) 337-3057

Manassas(703) 631-8500

Salem(540) 380-2011

Winchester(540) 667-9777

LOUISIANAH & E EQUIP SERVICESwww.he-equipment.com

Alexandria(318) 443-7173Baton Rouge

(225) 356-6113Bossier City

(318) 746-5272Gonzales

(225) 644-2328Kenner

(504) 467-5906Lafayette

(337) 837-9600Lake Charles

(337) 528-2661

MISSISSIPPIPUCKETT RENTS

www.puckettrents.comRichland

(601) 939-5151Biloxi

(228) 392-2211Hattiesburg

(601) 264-1111Meridian

(601) 703-0116Madison

(601) 859-5131

NORTH CAROLINAJAMES RIVER EQUIPMENT

www.jamesriverequipment.com

Asheville(828) 667-0176

Charlotte(704) 597-0211Greensboro

(336) 668-2762Mt. Gilead

(910) 439-5653Wilkesboro

(336) 973-8201

R. W. MOORE EQUIPMENT CO.

www.rwmoore.comGarner

(919) 772-2121Ahoskie

(252) 332-5550Castle Hayne

(910) 675-9211Fayetteville

(910) 424-1200Greenville

(252) 758-4403New Bern

(252) 638-5838

SOUTH CAROLINA


Aynor(843)358-5688Simpsonville

(864) 963-5835West Columbia(803)794-9340

Ladson(843)572-0400

Andrews(843)221-4940Walterboro

(843)539-1420

ALABAMATHOMPSON TRACTOR

www.thompsontractor.comAuburn, AL

(334) 321-2030Birmingham, AL(205) 326-0334

Dothan, AL(334) 673-3300Huntsville, AL(256) 532-3001

Mobile, AL(251) 452-1180Montgomery, AL(334) 262-1101

Oxford/Anniston. AL(256) 835-5737

Shelby County, AL(205) 649-9489Tuscaloosa, AL(205) 247-3402


Dothan(334) 794-8691

Troy(334) 566-4181

GEORGIAFLINT EQUIPMENT CO.www.flintequipco.com

Adairsville(770) 773-9857

Albany(229) 888-1212

Atlanta(404) 691-9445

Braselton(770) 965-1889

Columbus(706) 687-3344

Grovetown(706) 855-5440

Macon(478)788-1586

Savannah(912) 964-7370

Brunswick(912)264-6161


Allis-Chalmers Forest Green HD21 Dozer/Ripper, 1:50

Scale ....................................................................................$80

Allis-Chalmers Orange HD21 Dozer/Ripper, 1:50 Scale $80

Allis-Chalmers Yellow HD21 Dozer/Ripper, 1:50 Scale ..$80

Bantam Truck Mounted Crane, 1:50 Scale ..................$115

Bobcat A300 Skid Steer Loader, Scale 1:25 ..................$40

Bobcat E35 Compact Excavator, 1:25 Scale ................$50

Bobcat E55 Compact Excavator, 1:25 Scale ................$60

Bobcat 5600 Toolcat Utility Vehicle, 1:25 Scale ............$55

Bobcat M200 Gold Skid Steer Loader, Scale 1:25 ......$30

Bobcat M400 Gold Skid Steer Loader, Scale 1:25 ......$25

Bobcat S510 Skid Steer Loader, 1:25 Scale ..................$65




Bobcat T550 Compact Track Loader, 1:25 Scale ..........$65



Bobcat Versahandler Tool Carrier, 1:25 Scale ..............$50

Bucyrus Erie 22B Backhoe, 1:50 Scale ......................$225

Bucyrus Erie 22B Shovel, 1:50 Scale ..........................$225

Case CX250C Excavator, 1:50 Scale ............................$195

Case 580ST Backhoe/Loader, 1:50 Scale ......................$95

Case 695 Super “R” Backhoe/Loader, 1:50 Scale ......$165

Case 1102 Vibromax Roller, 1:35 Scale ......................$100

Caterpillar AP655D Asphalt Paver, W/O Canopy, 1:50

Scale..................................................................................$80

Caterpillar CT660 Day Cab Tractor w/Trail King Lowboy

Trailer, 1:50 Scale ..........................................................$100

Caterpillar D5K2 LGP Track-Type Tractor, 1:50 Scale ..$65

Caterpillar D7E Track-Type Tractor, 1:50 Scale ............$90

Caterpillar D8T Track-Type Tractor, 1:50 Scale ..........$110

Caterpillar D10T Track-Type Tractor, 1:50 Scale ........$105

Caterpillar D11R Track-Type Tractor, 1:50 Scale ........$100

Caterpillar 140M Motor Grader, 1:50 Scale....................$85

Caterpillar M200 Cold Planer, 1:50 Scale ....................$110

Caterpillar 226B3 Skid Steer Loader, 1:32 Scale ..........$40

Caterpillar 336D L Excavator, 1:50 Scale ......................$95

Caterpillar 336D L Excavator, 1:50 Scale ......................$95

Caterpillar 365B L Series II Excavator, 1:50 Scale........$75

Caterpillar 963D Track Loader, 1:50 Scale ....................$60

Caterpillar 977 Traxcavator, 1:50 Scale..........................$60

Doosan Moxy MT31 Articulated Truck ........................$100

Hamm GRW 280 Compactor w/Canopy, 1:50 Scale......$90

Hamm 3307 Compact Roller, 1:34 Scale........................$45

Hamm 3414 Soil Compactor, 1:50 Scale........................$90

Hitachi EH700 Off-Highway Truck, 1:50 Scale ..............$40

International 175 Crawler Loader, 4in1, 1:50 Scale ......$65

International TD-20E Dozer, 1:64 Scale ........................$24

International TD-25 Dozer, 1:50 Scale............................$75

JCB 3CX Backhoe/Loader, 1:50 Scale ..........................$75

John Deere “BO” Lindeman Crawler Tractor, 1:16 Scale ..

..........................................................................................$70

John Deere MC Crawler Dozer, 1:16 Scale ....................$60

John Deere 200 LC Excavator, 1:50 Scale ....................$60

Komatsu D51 PX Dozer, 1:50 Scale................................$85

Komatsu D51 EX Dozer, 1:50 Scale................................$85

Komatsu D65PX-17 Dozer, 1:50 Scale ..........................$80

Komatsu D155 AX Dozer, 1:50 Scale..............................$85

Komatsu D375 A Dozer, 1:50 Scale ..............................$125

Komatsu D475A-SEO Dozer, 1:50 Scale ......................$125

Komatsu HD605 Off-Highway Truck, 1:50 Scale ..........$80

Komatsu HM250 Articulated Dump Truck, 1:50 Scale..$75

Komatsu HM400-3 Articulated Truck, 1:50 Scale........$100

Komatsu PC14R Mini-Excavator, 1:32 Scale ................$45

Komatsu WA500 Wheel Loader, 1:50 Scale ..................$80

Komatsu WB146 Backhoe/Loader, 1:50 Scale ..............$75

Komatsu Mack Granite MP w/Lowboy Trailer, 1:50 Scale ..

..........................................................................................$90

Liebherr LTF 1060-4.1 4 Axle Crane, 1:50 Scale ........$215

Liebherr LTM 1050-3.1 Tri-Axle Crane, 1:50 Scale ......$185

Liebherr LTM 1070-4.1 4 Axle Crane, 1:50 Scale ........$265

Link-Belt 250 X Excavator, 1:50 Scale ........................$140

Poclain 350 Front Shovel, 1:50 Scale ..........................$190

Terex AC100/4 All Terrain Crane, 1:50 Scale ..............$200

Terex TR60 Off-Highway Truck, 1:50 Scale ................$160

Vogele MT3000 Powerfeeder, 1:50 Scale ....................$140

Vogele Super 700 Paver, 1:50 Scale ..............................$80

Vogele 1900 Tracked Paver, 1:50 Scale ......................$125

Vogele Vision 5200-2 Tracked Paver, 1:50 Scale ........$115

Volvo A40F Articulated Truck, 1:50 Scale....................$130

Volvo EC280 Excavator, 1:50 Scale................................$50

Volvo L220G Wheel Loader, 1:50 Scale ......................$120

Volvo 6870 Wheeled Asphalt Paver, 1:50 Scale ............$90

Wirtgen W210 Cold Milling Machine, 1:50 Scale ..........$80

Wirtgen W250i Cold Milling Machine, 1:50 Scale........$160

Wirtgen WR240 Recycler, 1:50 Scale ..........................$140

Collections Wanted, I Buy Collections Shipping and Handling Included

Contact – Barry McKeon800-523-2200 Ext. 197 • 610-506-5961 Cell

Email – [email protected]

CEG Scale Models470 Maryland Drive

Fort Washington, PA 19034Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

Liebherr LTM 1050-3.1 Three Axle Crane, 1:50 Scale $185International 560 Pay Loader, 1:25 Scale $145Caterpillar 988K Wheel Loader, 1:50 Scale $120

Toys For Boys(and also men)Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.


RISH EQUIPMENT COMPANYwww.rish.com

Bluefield, WV • 304/327-5124Chesapeake, VA • 757/485-2100

Chester, VA • 804/748-6411Coeburn, VA • 276/395-6901

Opal, VA • 540/439-0668Salem, VA • 540/380-2090

Staunton, VA • 540/887-8291

POWER EQUIPMENTwww.powerequipco.com

Knoxville, TN • 865/577-5563LaVergne, TN • 615/213-0900

Chattanooga, TN • 423/894-1870Kingsport, TN • 423/349-6111Memphis, TN • 901/346-9800Saltillo, MS • 662/869-0283

LINDER INDUSTRIALMACHINERY

www.linderco.com

www.facebook.com/linderindustrialmachinery

FloridaFt. Myers • 239/337-1313

Jacksonville • 904/786-6710Ocala • 352/629-7585

Orlando • 407/849-6560Pembroke Pines • 954/433-2800

Plant City • 813/754-2727West Palm Beach • 561/863-0570

North CarolinaAsheville • 828/681-5172Charlotte • 704/376-7554Greenville • 252/695-6200High Point • 336/665-0110Raleigh • 919/851-2030

Wilmington • 910/254-2031

South CarolinaColumbia • 803/794-6150

Greer • 864/877-8962North Charleston • 843/552-0095

TRACTOR & EQUIPMENTCOMPANY

www.tractor-equipment.com

AlabamaAlabaster • 205/621-2489Anniston • 256/831-2440

Birmingham • 205/591-2131Decatur • 256/355-0305Dothan • 334/678-1832Mobile • 251/457-8991

Montgomery • 334/288-6580Shoals Area • 256/383-5666Tuscaloosa • 205/752-0621

FloridaPanama City • 850/763-4654Pensacola • 850/505-0550

GeorgiaAlbany • 229/435-0982Atlanta • 404-366-0693Augusta • 706/798-7777Calhoun • 706/879-6200

Columbus • 706/562-1801Hoschton • 706/654-9850Kennesaw • 678/354-5533

Macon • 478/745-6891Savannah • 912/330-7500

find us on


ASPHALT EQUIPMENT

Asphalt Pavers

'00 Blaw Knox PF-2181, 8'-13'

vibratory screed, front wheel

assist, ready to work, 5790 hrs

..................................$19,000.

'95 Blaw Knox PF-200B, 10'-

16' vibratory screed, front wheel

assist, electronics ready, ready

to work, 5155 hrs ......$16,000.

'95 Blaw Knox PF-220B, 10'-

18- vibratory screed, front

wheel assist, electronics ready,

ready to work, 7139 hrs ..........

..................................$15,000.

301-589-9490

EXCAVATORS

Hydraulic Excavators

2006 Hyundai R500LC-7A,S/N NB0610013, good condi-tion, 5200 hours ......$135,000.

440/439/4000

LOADERS

Backhoe Loaders

2001 John Deere 310SG,OROPS, 4x4, Ext-A-Hoe, goodcondition, 3400 hrs ....$32,500.

913-787-2371

1987 CASE 580K, 2WD, ROPSCanopy, 24'' bucket, fair condi-tion, 7600 hours..........$10,950.

800-432-0913

Crawler Loaders

1999 Catepillar 953C,OROPS, Single-lever, GPBucket, good cond ....$29,500.

913-371-3822

Wheel Loaders

2005 JCB 407B, Cab w/ Heat &AC, 1.0 CU YD Compact WheelLoader, QC Coupler, picturesavailable, good condition, 2950hrs ..............................$29,750.

908-625-0697

MATERIAL HANDLERS

Material Handlers

Liebherr A932HD MaterialHandler, S/N 5316, good condi-tion, 17,968 hours ....$125,000.

440/439/4000

Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢. For just an additional $20 your ad can be posted on our online searchable database for 30 days

Ad runs for 2 (two) insertions - no changes in second insertion.

PLEASE ENCLOSE PAYMENT WITH ORDER and mail to: 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200

CLASSIFIEDS

Here's how the BARGAIN ADS Work:• Supply us with a photo of a machine

(one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number.

• Either email your copy & photo to:[email protected],

or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.

• Cost is $95 per ad, $50 additional for color.

• Your ad will run for two consecutive issues in 1 region.

Your Ad Will Be Seen By Over 24,273 ConstructionEquipment Buyers in the Southeast States.

For more information, call Construction Equipment Guide today at

800/523-2200

The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95

Sennebogen 835M Multihandler7006 hours $295,000

Please call Rob Jordan at 704-839-9553for more information. 1 RM

“TRACKS FOR YOUR MACHINE!!” $7,000,000 Inventory of High-QualityRubber Tracks to fit over 3000 models of construction equip. PNEUMATICAND FLATPROOF SKIDSTEER TIRES also available. $95 Next day ship-ping to 23 states...........................................................................................Call

Summit Supply LLC888-888-1248 • [email protected] 1-2 TM

McLaren Rubber Tracks for Mini Excavators & TrackLoaders, The Most Trusted Brand in America Brings YouQuality Tracks for your Specific Make and Model

Call McLaren 888-492-4230 1 FS

Wacker Neuson’s HDR 155Directs Clean, Dry Heat

The Wacker Neuson HDR 155 direct-fired radiant heater features a heating designunaffected by the elements, so the heat iseasily directed exactly to where it’s needed,according to the manufacturer. Delivering 155,000 BTU/hour (45 kW)

heat input, the HDR 155 easily heats work-spaces, workers and objects such as equip-ment, concrete form work and other struc-tures from approximately 15 ft. (5 m) away.Since infrared heat radiates directly from theheater’s disc, the HDR 155 does not rely onwarming the surrounding air like convectionheating, so it produces quick, intense heat.The direct-fired HDR 155 heater uses an

oil flame to heat its stainless steel disc toapproximately 1,700 F (926.7 C). The shieldemits electromagnetic (infrared) waves thattravel in straight lines away from the heater,unaffected by wind or weather, to warmobjects they hit. Exhaust gases are directedupward, so the heat is clean, dry and healthy.The heater’s 300-series stainless steel frontpanel delivers performance and extreme reli-ability and longevity.The design of the HDR 155 boasts three

concentric cones: the inner cone containingthe flame; center cone that protects the out-ermost surface from heat; and external coneconstructed of high-temperature-painted car-bon steel. The air stream is split between theinner cone to support the flame and centercone to provide cooling air for the heater’ssurface. This “refractory free” cooling sys-tem results in a significantly cooler heatersurface that does not require the expense ormaintenance of molded heat refractory pan-els, according to the manufacturer. “Molded refractory is used to slow the

movement of heat, but the rear surface of a

heater using molded refractory still getsextremely hot after less than one hour ofoperation,” said David Mencel, ClimateTechnology product manager of WackerNeuson. “Conversely, the Wacker Neusonair-cooled design keeps the rear of the HDR155 significantly cooler than other radiantheaters on the market. In addition, ours is alow-maintenance cooling system, whereasmolded refractory eventually cracks andmust be replaced, which costs the ownerhundreds of dollars in maintenance.”The new construction-grade Wacker

Neuson HDR 155 direct-fired radiant heaterboasts many rental- and user-friendly fea-tures that lower operating costs and providemany years of reliable service. Large pneu-matic tires, single point lift bail and tie-downs provide easy loading and transport.Its retractable floor guard eliminates the needfor floor mats or other protection, while atwo-position, 10-degree adjustable housingoffers precise control over heat direction.The heater’s rugged, rotomolded plastic fueltank provides enough capacity for a 15-hourcontinuous run time, and an optional remotethermostat gives operators control over thetemperature at the job site.Because of its rugged design, the HDR

155 can be used in a variety of heating appli-cations, including construction sites, ware-houses, dairy, sports arenas, aircraft/hangarheating and thawing, mining and oil servic-es, highway maintenance, and concrete cur-ing.For more information, visit www.wack-

erneuson.com.(This story also can be found on



CATERPILLAR 12G MOTOR GRADER |10,000 SERIAL NUMBER, CAB, RIPPEROR SCARIFIER, WHOLESALE/AUCTIONPRICE, UNADVERTISEDCONTACT: RICHARDPHONE: 603 828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––KOMATSU BR380 JG1 TRACK JAWCRUSHER | LATE MODEL LOW HOURUSA LOCATIONCONTACT: RICHARDPHONE: 603 828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––WATERJET PUMP | ORMOND, LLC ISLOOKING TO PURCHASE A USEDDIRECT DRIVE TRIPLEX PUMP CAPA-BLE OF 50 THRU 60 KSI AT 1 GPM.PUMP WILL BE USED WITH HANDHELDBLASTING TOOLS.CONTACT: JOE MALONEYPHONE: 253-852-6942FAX: 253-852-6940EMAIL:[email protected]––––––––––––––––––––––––––––––––WE WANT TO KNOW WHO OWNS USEDMARSH BUGGIES AND WE PAY SEVER-AL $1,000 FINDERS FEES IF THEIR INFOHELPS US FIND UNITS TO RENT BUYOR SELL. CONTACT: TYLER PALUMBOEMAIL: [email protected]––––––––––––––––––––––––––––––––WE BUY MANUALS | WE ARE LOOKINGTO PURCHASE NEW OR USED SERV-ICE, SHOP, PARTS, OPERATOR’S OROTHER MANUALS FOR EQUIPMENT,TRUCKS AND VEHICLES OF ALLSORTS. WE PREFER IN BULK, PER-HAPS YOU HAVE COMPUTERIZEDYOUR SERVICE OR PARTS OPERATIONAND YOU HAVE BOOKS OR MANUALSYOU NO LONGER NEED, OR INVENTO-RIES YOU HAVE NOT SOLD. PERHAPSAS A DISCONTINUED PRODUCT LINE.WE WILL PURCHASE IN ANY USEABLECONDITION IN ANY AMOUNT YOUHAVE. CONTACT: GRACE FRANCESPHONE: 270-849-2270EMAIL: [email protected]––––––––––––––––––––––––––––––––CUMMINS ENGINE K38 | WE ARE LOOK-ING FOR 10 UNITS CUMMINS DIESELENGINES TO FIT IN KOMATSU DUMPTRUCK.( NEW, REBUILD OR GOODUSED TAKE OUT IN WORKING CONDI-TION ) PLEASE SERIOUS SUPPLIERSEND ME PICTURES, FULL DETAILSCONTACT: M.ASKARIPHONE: 819-246-9577FAX: 819-205-0972 |EMAIL:[email protected]––––––––––––––––––––––––––––––––TBM SALE NOTICE | WE ARE OFFER-ING DOUBLE SHIELD TBM WITH BACK-UP FOR SALE CURRENTLY THIS TBM ISDEPLOYED AT ONE OF OUR PROJECTIN INDIA AND WILL BE AVAILABLE FORSALE BY APRIL 2014.CONTACT: HINDUSTAN CONSTRUCTIONCOMPANY LTD PHONE: +91 022 25751444EMAIL:[email protected]––––––––––––––––––––––––––––––––

300 TON PER HOUR JAW CRUSHER | (3)- 60 FT. CONVEYORS (18" - 24" BELT) -(3) - 80 FT.CONVEYORS (24" BELT)CONTACT: SEMAC CONSTRUCTIONPHONE: 229-344-4235EMAIL: [email protected]––––––––––––––––––––––––––––––––NEEDED 12 MONTHS 7 DAYS BULLDOZ-ER D7AT D10 ENC CAB RIPPERKOMASTU 155 375 ENC CAB RIPPER2009 AND UP LOW HOURS NOT ADVER-TISED DRIVER BUY SELL INSPECTIONBULLDOZERSCONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975 OR MOB 1 514 38 68975EMAIL:[email protected]––––––––––––––––––––––––––––––––CATERPILALR 14G AND A 140G. THE140G NEEDS A RIPPER. NEED TO BE INGOOD CONDITION. CONTACT: SAM MAIERPHONE: 912-433-9449FAX: 912-826-0665EMAIL:[email protected]––––––––––––––––––––––––––––––––2006 VOLVO L90E & L220E LOADER |NEED IN USA. THEY NEED TO BE INGOOD CONDITION.CONTACT: ROBERT HERRINGPHONE: 229-344-4235 FAX: 229-439-4578EMAIL:[email protected]––––––––––––––––––––––––––––––––CARLSON SUPERVISOR GPS SYSTEMCONTACT: STEVE SHERFEYPHONE: 423-316-2886EMAIL:[email protected]––––––––––––––––––––––––––––––––MOTOR GRADER | WE WANT TO BUYUSED CAT 14G MOTOR GRADER, 1979AND UP. SEND PICTURES, SERIALNUMBERS, YEAR MODEL, MACHINECONDITION, LOCATION AND FINALOFFER PRICE. WE ARE ALSO LOOKINGFOR CAT 140G/H GRADERS YEAR 1988-2005 WITH RIPPER.CONTACT: AIMN BLBOLPHONE: +971504814823FAX: +97165355291EMAIL:[email protected]––––––––––––––––––––––––––––––––NEED TO BUY (3) S/S RIPPERS FOR (3)CAT 10N CRAWLER TRACTORS THAT ISFOR SALE. ALSO I NEED (1) S/S RIPPERFOR A CAT D9R THAT IS FOR SALE.CONTACT: R.L. HERRINGPHONE: 229-638-0635EMAIL: [email protected]––––––––––––––––––––––––––––––––PRESSURE DIGGER WITH TRUCK |LOOKING FOR A SINGLE AXLE TRUCKWITH PRESSURE DIGGER WITH 15-20DIG CAPACITYCONTACT: KENEMAIL: [email protected]––––––––––––––––––––––––––––––––TRUCK TRACTOR TRIAXLE | 2004-2009PETERBILT OR KENWORTH LOW MILESHEAVY DUTY MICHIGAN SPECIAL, DOU-BLE FRAME, H.D. REAR ENDS. N-14CUMMINS OR CAT CA15 OR BIGGERMOTOR, WET KITCONTACT: MARK STANKEVICH FAX: 248-667-9121EMAIL: [email protected]––––––––––––––––––––––––––––––––

JOHN DEERE 410G 2002 2003 2004CONTACT: ANGEL MENESESPHONE: 561 412 9288EMAIL: [email protected]––––––––––––––––––––––––––––––––LOOKING TO PURCHASE 1- CATERPIL-LAR D9T DOZER WITH RIPPER AND3000-5000 HOURS. WORK READY.CONTACT: GLENN RUSSELLPHONE: 360.314.7413FAX: 360.722.3222EMAIL:[email protected]––––––––––––––––––––––––––––––––BLAW KNOX PF 4410 TRACKS | PAIROF TRACKSCONTACT: M. TIM EASTONPHONE: 216-990-8347FAX: 440-422-3201EMAIL:[email protected]––––––––––––––––––––––––––––––––LOOKING FOR TH210 TH215 TELEHANDLERCONTACT: TIM BEMAIL: [email protected]––––––––––––––––––––––––––––––––WHEEL LOADER | LOOKING FOR AGOOD USED WHEEL LOADER WITHUNDER 4000 HRS FOR UNDER $55,000CONTACT: JAY MESSLERPHONE: 508-726-4409EMAIL:[email protected]––––––––––––––––––––––––––––––––MINI LOADERCONTACT: JOSEPH ROUHANAPHONE: 009613415866EMAIL:[email protected]––––––––––––––––––––––––––––––––CUMMINS DIESEL ENGINES K38 | WEARE LOOKING TO BUY 10 COMPLETENEW / REBUILD OR GOOD TAKE OUTCUMMINS DIESEL ENGINES K38 ( 12CYLINDER ) TO FIT IN KOMATSU DUMPTRUCK. PLEASE CONTACT IF YOU AREA SERIOUS SUPPLIERCONTACT: M.ASKARIPHONE: 819-246-9577FAX: 819-205-0972EMAIL:[email protected]––––––––––––––––––––––––––––––––WANTED 2004-2008 CHEVY/GMCTRUCK, 2500, 4X4, REGULAR CAB, 8FTBED. WILL TRADE HISTORICAL/CLAS-SIC CADILLAC ELDORADO BIARRITZ.CONTACT: JOHNPHONE: 440-567-5108FAX: 440-269-8161EMAIL: [email protected]––––––––––––––––––––––––––––––––WANTED 2004-2007 CHEVY/GMC TRUCK,2500, 4X4, REGULAR CAB, 8FT BED.WILL TRADE HISTORICAL/CLASSICCADILLAC, ORIGINAL OWNER.CONTACT: JOHNPHONE: 440-567-5108FAX: 440-269-8161EMAIL: [email protected]––––––––––––––––––––––––––––––––

DEERE 844K NEW OR UNDER 3000HOURS I HAVE AN ‘02 CAT 345 FORSALE, ‘08 CAT CS 56 ROLLER, NEWERMACK TRI DUMP WITH TRAILER, ‘08CAT 345, ‘11 CAT 247B ALL FOR SALE!CONTACT: JOEYPHONE: 570-250-5559EMAIL: [email protected]––––––––––––––––––––––––––––––––LOOKING FOR TO BUY CAT WHEELLOADER: 910/920/930 966 C/D/E /F / G/950 B/E/F I-II 910 E / 970 F 936 E/F 980F/GI/H/C - CAT EXCAVATOR: 215 / 219/225 / 229 / 235, YEAR : 1986 & UPCONTACT: MAHMOUD RAGABPHONE: +20 1272769667FAX: +20 26998400EMAIL:[email protected]––––––––––––––––––––––––––––––––JOHN DEERE A7 BACKHOE ATTACHMENTCONTACT: TOMASPHONE: 7072724592EMAIL: [email protected]––––––––––––––––––––––––––––––––JOHN DEERE BACKHOE ATTACHMENTFOR A 401 TRACTOR IN THE MINNESOTA AREA.CONTACT: MIKE BERGEMAIL: [email protected]––––––––––––––––––––––––––––––––MACK CTP713 DUMP TRUCK | I NEEDSEVERAL MACK CTP713 GRANITEDUMP TRUCKS. SEND WHAT YOUHAVE. THANKSCONTACT: SAM MAIERPHONE: 912-433-9449FAX: 912-826-0665EMAIL:[email protected]––––––––––––––––––––––––––––––––HYDRA PLATFORM PARTS | A STARTERCONTACT: GLORIA HURSTPHONE: 757-362-4079EMAIL: [email protected]––––––––––––––––––––––––––––––––YANMAR | I WANT TO BUY A USED 4554WD YANMAR TRACTOR LOADER 4CYL. OR A YANMAR LX49 (INCLUDING ABACKHOE IF POSSIBLE). CONTACT: VASSILISEMAIL: [email protected]––––––––––––––––––––––––––––––––

RADIAL STACKER 36" TO 60" WIDE 150FEET LONG | NEED IMMEDIATELYCONTACT: SEMAC CONSTRUCTIONPHONE: 229-344-4235FAX: 229-439-4578EMAIL:[email protected]––––––––––––––––––––––––––––––––DIESEL GENERATORS | I AM BUYINGGENSETS!!! PLEASE CONTACT ME IFYOU HAVE ANY FOR SALE.CONTACT: DAMIAN MILLERPHONE: 260.210.9184EMAIL: [email protected]––––––––––––––––––––––––––––––––NEEDED D3GXL LOW HOURS, D5GXLLOW HOURS, NEAR NEW YORK USERONLY. NOT ADVERTISEDCONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975 OR MOB 1 514 386 8975EMAIL:[email protected]––––––––––––––––––––––––––––––––CATERPILLAR D9N & D9R CRAWLERTRACTORS | NEED RIPPER TRACTORSCONTACT: SEMAC CONSTRUCTIONPHONE: 229-344-4235FAX: 229-439-4578EMAIL:[email protected]––––––––––––––––––––––––––––––––REPLACEMENT GLASS FOR NEW HOLLAND L223 SKIDSTEER DOORCONTACT: DREAM ON FARMPHONE: 802-897-2610EMAIL: [email protected]––––––––––––––––––––––––––––––––KOMATSU BR380 JG1TRACK JAWCRUSHER | LATE MODEL LOW HOURUSA LOCATIONCONTACT: RICHARDPHONE: 603 828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––HA33CJ HAULOTTE | ARTICULATINGELECTRIC LIFT 35FT.CONTACT: BRANDON MINCHPHONE: 5305260538EMAIL: [email protected]––––––––––––––––––––––––––––––––L39 KUBOTA BACKHOE | L39 OR COMPARABLE BACKHOE FOR USE INCEMETERY EXCAVATIONS. USED WITHLOW HOURS IN GOOD MECHANICALCONDITION, 36" BUCKET. TEXAS LOCATIONS WITHIN 500 MILES OFHUNTSVILLE, TXCONTACT: WILLIAM EDWARDSPHONE: 210-336-0576EMAIL: [email protected]––––––––––––––––––––––––––––––––EXCAVATORSCONTACT: MICHAELPHONE: 207-667-4081FAX: 207-667-9443EMAIL: [email protected]––––––––––––––––––––––––––––––––END DUMP TRAILER | 6X10 SM DUMPTRAILER, SHINGLE LADDER HOIST200LB, TOE BEHING PERSONAL LIFTCONTACT: KEVINPHONE: 4132121601FAX: 4136371570EMAIL: [email protected]––––––––––––––––––––––––––––––––

NEED TO BUY MINING MACHINES ,EXCAVATOR, WASHING PLANTS ANDHEAVY DUTY EQUIPMENT FOR BUILD-ING AND ROAD CONSTRUCTION.CONTACT: GEORGE MARTINSPHONE: 000233244143452FAX: 00233303434546EMAIL:[email protected]––––––––––––––––––––––––––––––––S/A SEMI WITH SLEEPER 2003 OR 04 |LOOKING FOR A FREIGHTLINER S/ASLEEP 4 TO 500 HORSE, FOR HAULINGAUTOS ANY MAKE WILL DOCONTACT: JAMESPHONE: 513-4929671FAX: 513-4929670EMAIL: [email protected]––––––––––––––––––––––––––––––––LOADER & EXCAVATOR & CRAWLER |CONTACT: KEVINPHONE: 2187795516FAX: 7018472379EMAIL: [email protected]––––––––––––––––––––––––––––––––CASE DH7 TRENCHER | RIGHT REARAXLE FOR A CASE DH7 TRENCHER.CONTACT: RON HEINEPHONE: 620-617-6486EMAIL: [email protected]––––––––––––––––––––––––––––––––BOOM SECTIONS FOR A GROVE HL 150T--#68CONTACT: MARVIN WASIKPHONE: 352 746 4860FAX: 352 746 7722EMAIL:[email protected]––––––––––––––––––––––––––––––––SMOOTH INTERIOR PIPE | 600FT OF12"-24" SMOOTH INTERIOR PIPE. USED,LEFTOVER, FADED, BAD GASKETS OK.NO CRACKS. WATER MAIN, HDPE, ORSEWER PIPE ACCEPTABLE. CONTACT: ZACH PIEPERPHONE: 319-470-8200FAX: 319-372-2277EMAIL:[email protected]––––––––––––––––––––––––––––––––YANMAR TRACTOR WITH FRONTBUCKET | SMALL TRACTOR. AROUND40 WITH A FRONT BUCKETCONTACT: DEEJAY PEPPERPHONE: 318-413-1351EMAIL: [email protected]––––––––––––––––––––––––––––––––BULLDOZER 450 JD | IT’S IN A VERYGOOD AND WORKING CONDITION.CONTACT: MARK WOLFEMAIL: [email protected]––––––––––––––––––––––––––––––––NEED ALL THE TIME NOT ADVERTISEDBULLDOZER EXCAVATOR GRADERLOADER LIFT USER USA NEAR F PORTI NEED TO SEE PROOF OF OWNERSHIP CONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975 OR MOB 1 514 38 68975EMAIL:[email protected]––––––––––––––––––––––––––––––––

Attention Contractors!Post Your Wanted To Buy Listings FREE!

Here’s How! List Your Wanted ItemsIf you would like to place your Wanted To Buy listings on our website

for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings.


ALEX LYON & SON

AUCTIONEERS

www.lyonauction.com

315-633-2944�

• Philadelphia, PA

Fri., January 10, 2014For: Late Model Rental ReturnConstruction Equipment

• Totowa, NJ

Sat., January 11, 2014For: Complete Liquidation ofTrucking & WarehouseCompany

• Atlanta, GA

Thurs., January 16, 2014For: Liquidation of MajorTrucking Company, etc.

• Columbus, OH

Sat., January 18, 2014For: Late Model John Deere &Cat Rental Fleet

• Lima, Peru

Sat., January 25, 2014For: Late Model John Deere &Cat Construction Equipment &Support Accessories

• Kissimmee, FL

February 1-9, 2014For: 21st Annual ConstructionEquipment Auction

• Las Vegas, NV

Wed., March 5, 2014For: Rental Fleet Equipment

• Atlantic City, NJ

March 27-29, 2014For: Construction Equipment

• Buffalo, NY

April 5-6, 2014For: Estate Auction, Cars,Construction Equip., Trucks &Trailers

RITCHIE BROS.

AUCTIONEERS

www.rbauction.com

402-421-2631

• Orlando, FL

February 17-22, 2014

BIG IRON

www.bigiron.com

800-937-3558�

• ONLINE ONLY

January 15, 2014

• ONLINE ONLY

January 22, 2014

• ONLINE ONLYJanuary 29, 2014

• ONLINE ONLYFebruary 5, 2014




• ONLINE ONLYMarch 5, 2014




• ONLINE ONLYApril 2, 2014





CAT AUCTION SERVICES

www.catauctions.com

866-750-9432�

• FloridaFri., February 14, 2014For: Construction Equipment

HESS AUCTIONEERS

www.hessauctioneers.net

�866-511-2493

• Marietta, PAFri., February 7, 2014For: Truck, Trailer &Equipment

IRAY AUCTIONS

www.iraymn.com

�320-968-7230

• Foley, MNFri., March 7, 2014For: Heavy ConstructionEquipment, Truck & Trailer

• Foley, MNFri., June 6, 2014For: Heavy ConstructionEquipment, Truck & Trailer

• Foley, MNFri., September 12, 2014For: Heavy ConstructionEquipment, Truck & Trailer

• Foley, MNFri., December 5, 2014For: Heavy ConstructionEquipment, Truck & Trailer

IRON PLANET AUCTIONS

www.ironplanet.com

�888-433-5426

ONLINE AUCTIONSGo to www.ironplanet.com to

view the complete auction sched-

ules, inspection reports and to

place your bid!



• ONLINE ONLYJanuary 28-30, 2014



• ONLINE ONLYFebruary 26-28, 2014




• ONLINE ONLYMarch 26-28, 2014

J.J. KANE AUCTIONEERS

www.jjkane.com

�855-GO2-KANE

• Philadelphia, PASat., January 25, 2014For: Construction Equipment

• Portland, ORWed., January 29, 2014For: Construction Equipment

• Dallas, TXThurs., January 30, 2014For: Construction Equipment

• St. Louis, MOThurs., February 20, 2014For: Construction Equipment

KEENAN AUCTION COMPANY

www.keenanauction.com

207-885-5100

• Augusta, METhurs., January 30, 2014For: Construction and SupportEquipment

MARTIN & MARTIN

AUCTIONEERS, INC.

www.mmaauction.com

�800-763-2728

• Mooresville, NCTues., January 14, 2014For: Absolute complete liqui-dation

• Hobbs, NMWed., January 15, 2014For: Oil Field Auction

• Pelzer, SCJanuary 21-23, 2014For: Three Day Public WinterAuction

• Brooklyn, MSFebruary 20-22, 2014For: Three day Early SpringContractors Auction

• Lucedale, MSSat., March 8, 2014For: Farm & Construction

• Meridian, MSSat., March 29, 2014For: Farm & ConstructionEquipment

• Ellijay, GASat., April 12, 2014For: Farm/Real Estate Auction

MEEKINS AUCTION

COMPANY

www.meekinsauction.com

�800-499-6560

• New Bern, NCTues., January 28, 2014For: Marine ConstructionEquipment

POWERS AUCTION &

EQUIPMENT SALES

www.mikepowersauctions.com

�815-338-9700

• Hampshire, IL

Sat., January 11, 2014For: P.S. Coyote UndergroundEquipment Reduction

VAUGHAN AUCTION GROUP

www.vaughanauctiongroup.com

�903-873-6777

• Wills Point, TX

Thurs., February 6, 2014For: Contractor’s PublicAuction

WAYNE PIKE

AUCTION COMPANY

www.waynepikeauction.com

763-389-5700

• Princeton, MN

Sat., March 15, 2014For: Heavy Equipment

• Princeton, MN

Sat., June 14, 2014For: Heavy Equipment

• Princeton, MN

Sat., September 13, 2014For: Heavy Equipment

• Princeton, MN

Sat., December 6, 2014For: Heavy Equipment

YODER & FREY

AUCTIONEERS, INC.

www.yoderandfrey.com

�419-865-3990

• Ft. Myers, FL

Fri., January 31, 2014For: Complete Liquidation

• Kissimmee, FL

February 10-17, 2014For: 40th Annual Auction

• St. Cloud, FL

Tues., February 18, 2014For: Absolute Antique Farm

UTILITY AUCTIONS

www.utilityauctions.net

302-530-9103

• Wilmington, DE

Friday, February 28, 2014For: Construction, Utility, &Forestry Equipment

AuctionsComingTo view information on upcoming auctions visit our Auction Calendar at

www.constructionequipmentguide.com


To view our Business Calendar online, go to www.constructionequipmentguide.com.

AGC ST. LOUIS IF IT’S NEW, IT’S HERE!CONEXPO-CON/AGG will represent an immense unveiling of all thenewest equipment, technology and product breakthrough in con-struction. From earthshaking big iron to groundbreaking innova-tions, it’s all assembled in one place to help you work smarter.CONEXPO-CON/AGG 2014 – If it’s new, it’s here!

CONEXPO – CON/AGG 2014 – if it’s new, it’s here!MARCH 4 thru 8, 2014LAS VEGAS, NEVADA USA

LAS VEGAS CONVENTION CENTER

CONEXPO-CON/AGG 2014 WILL FEATURE:. 2,400 exhibitors showcasing new products and technologiesfrom for every major construction industry including asphalt,aggregates, concrete, earthmoving, lifting, mining, utilities andmore.. Over 130,000 attendees that range from contractors, to deal-ers & distributors, to service providers, engineers, producers,municipalities, and more. . A comprehensive education program during the five-day expo-sition with sessions emphasizing industry issues and trends,management and applied technology.

For more information, please contact AGC of St. Louis, 6330Knox Industrial Drive, Suite 200, St. Louis, MO - Phone:314/781-2356; Fax: 314/781-2874.

February 10 – 13, 2014 – The Rental Show (ARA)Orange County Convention Center, Orlando, FLThe Rental Show is the American Rental Association’s annualconvention and trade show for the equipment rental industry.It features construction/industrial equipment, generaltool/homeowner and party/special event equipment, as wellas rental – specific seminars and industry networking. Formore information on The Rental Show, please contact SumnerManufacturing Company, Inc., Houston, Texas at 281/999-6900.

Ohio Oil and Gas Association (OOGA)2014 OOGA WINTER MEETING AND HALL OF FAME DINNERMarch 5 to 7, 2014Hilton Columbus at Easton3900 Chagrin DriveColumbus, OH 43219OOGA, general information phone number: 614/824-3901.

Illinois Association of Aggregate Producers (IAAP) – 2014’sfirst AGGI ONLINE WEBINAR, “The Journey to Zero,” willtake place on January 14, 2014 (Noon to 1:00 PM CST).Go to https://www.nssga.org/commerce/AGGI OnlineWebinar 0114 regform.cfm to learn more and register. Ifyou have questions, contact Catherine Whalen,NSSGA:[email protected]. Phone: 217/241-1639; Fax:217/241-1641.

Minnesota Nursery & Landscape Association (MNLA)Super Tuesday: Landscape Lighting Design & Technology (PLTRelicensure)Date: January 7, 2014Time: 8:00 AM CST to 5:00 PM CSTLocation: Minneapolis Convention Center, 1301 2nd Avenue S.,Minneapolis, MNPlease note: Advance Registration is required for Super Tuesday pro-grams. No onsite registration will be taken for Super Tuesday. Class# 20130421…this class provides a total of eight hours of continu-ing education credits for the Power Limited technician license, withmaterial orientated specifically towards the landscape lighting spe-cialist. You may contact the MNLA at 651/633-4987 for more information.

Minnesota Nursery & Landscape Association (MNLA)MNLA CEO Symposium – Workforce 2020: Preparing for What(and Who) the Future will Bring Date: January 7, 2014Time: 4:00 PM CST to 8:30 PM CSTLocation: Hyatt Regency Hotel, 1300 Nicollet Mall, Minneapolis, MNIn order to position your organization to attract top talent, drive break-throughs, and serve customers better, employers need to understandand prepare for the evolution of the workforce. In this presentation,CEO’s will learn about the chief workforce indicators of change, howto position their companies to be innovative and responsive to thesechanges to attract top talent and win in the marketplace. Presentedby Sarah Sladek, Founder and CEO of XYZ University and a renownedspeaker who delivers clear value to audiences committed to bridgingthe generational gap and creating sustainable organizations. Formore information on this Symposium, you may contact the MNLA at651/633-4987.

SAVE THE DATE!!!2014 OILFIELD EXPODECEMBER 2 thru 4, 2014International Exhibition (1X) CenterCleveland, OhioNORTHERN GREEN EXPO 2014 – January 8, 9 & 10, 2014Minneapolis Convention Center/NorthernGreenExpo.orgThis year’s trade show features over 825 booths in a 178,000

square foot exhibit hall. For a full listing of exhibitors please visit the Northern Green Expowebsite Vendor Directory. Wednesday, January 8, 2014 from 10:30 AM to 5:00 PMThursday, January 9, 2014 from 9:30 AM to 5:00 PMFriday, January 10, 2014 from 9:30 AM to 1:00 PMInterested in exhibiting at the show? Contact Mary Dunn at651/633-4987; and you may call the Northern Green Expo office directly toll free:888/886-6652.

CENTS SHOW, Columbus, OhioThe Central Environmental Nursery Trade Show is a specialkind of show that is going to be organized from January 13 to15, 2014 at the Greater Columbus Convention Center inColumbus, Ohio. CENTS is one of the very different kinds of anevent that provide the latest technologies of green industry.This event comprises different set of programs which will takeplace in the span of three days. It can be the right place to planout something very serious, something related to tradition andinnovation in the field of nursery and green industry. TheCENTS Marketplace is managed by the Ohio Nursery &Landscape Association (ONLA). To reserve your booth for thisevent, please call 800/825-5062. For more information,please call ONLA Headquarters main phone: 614/899-1195and Main Fax: 614/899-9489.

AED CONDEX, Houston, TexasCONDEX 2014: January 15 to 17, 2014 at the George R.Brown Convention Center, Houston, TexasShow Location: Exhibit Hall EThanks to all of our 2013 Exhibitors! We look forward to see-ing you in Houston, Texas in 2014!There’s no time like the present to prepare for CONDEX 2014. . Introduce your company, products or services to potentialnew distributors. Enhance your brand image or identity. Improve your competitive position in the marketplace. Network with your current distributors. Introduce new products or services to existing distributorsEach year the industry’s top executives gather at the AEDSummit & CONDEX Trade Show as the only show in the indus-try dedicated strictly to equipment distribution.Success is all about partners and CONDEX is your chance tocreate dialogue and build sound business relationships.QUESTIONS? Contact Sandy Brassel at 630/468-5126.

WORLD OF CONCRETE (WOC) 2014, Las Vegas ConventionCenter, Las Vegas, NVJanuary 21 to 24, 2014 - Celebrating 40 Years of IndustryExcellence…WOC is the industry’s only annual internationalevent dedicated to the commercial concrete and masonry con-struction industries showcasing leading industry suppliers.WOC features innovative tools, construction machinery, con-struction equipment, safety training courses and training, tech-nologies and unlimited networking opportunities to give younew ways to sustain and grow your business. World ofConcrete is considered by many to be one of the top shows inthe industry. The outdoor exhibit areas, including the hugelypopular Artistry in Decorative Concrete, make World of ConcreteTHE event to attend in 2014. WOC attracts approximately1,300 exhibitors and occupies more than 500,000 square feetof indoor and outdoor exhibit space. For more information, youmay contact Tom Cindric, Vice President at 972/536-6371 orJackie James, Director at 972/536-6379.

MICHIGAN INFRASTRUCTURE TRANSPORTATION ASSOCIA-TION (MITA)2014 MITA ANNUAL CONFERENCEDates: January 22 to 24, 2014; Soaring Eagle Casino &Resort, Mt. Pleasant, MIBegins JAN 22, 2014 at 8 AM Ends JAN 24, 2014 at 12 AMFor more information, please contact MITA offices at 517/347-8336

OMEDA 2014 POWER SHOWJANUARY 24, 25 & 26, 2014OHIO EXPO CENTER, COLUMBUS, OHIOFriday…Saturday…Sunday…9 AM to 4 PMPower Show Ohio is a major event of its kind in the region. Theevent showcases everything falling in the purview ofAgricultural Equipment, Construction Equipment and OutdoorPower Equipment. The event brings to the table the variousdevelopments and advancements made in this field. The showhaving such a vast area of expertise has a wide appeal amonga varied section of business community. Power Show Ohiocan be seen as a trend setter as this event sets a bench markfor future development and research in the industry. The eventhaving such a massive appeal in the visitors as well asexhibitors community it acts as the perfect platform for newproduct launches, networking and building new businessopportunities. Power Show Ohio is sponsored by the Ohio-Michigan Equipment Dealers Association, P. O. Box 68,Dublin, OH 43017. For more information, please call614/889-1309 or Email: [email protected].

BusinessCalendar

Phone: (315) 633-2944 • Fax: (315) 633-8010

Syracuse, NY (Evenings) (315) 637-8912

www.lyonauction.com

Sales Managers & Auctioneers, Inc.

ALEX

LYON& SON

THURSDAY, JAN. 16 @ 10:00 AM

& Hertz EquipmentRentals

Sunbelt Rentals

NOTE: Selling Will Be a Long Time Local Trucking Company That is LiquidatingIts Trucks Along with Equipment Trailers From Hertz Equipment Rentals and RentalFleet Equipment From Sunbelt Rentals.

EARLY HILITES: 23 TRUCK TRACTORS: (22) 2007 Int’l. 9900 (t/a), 2005Western Star 4900EX (t/a), 5 EQUIPMENT TRAILERS: (5) 2005 TrailkingTK70HT 35ton (t/a), 7 VAN TRAILERS: (5) 2007 Wabash (t/a), (2) 2006 Hyundai(t/a) , HYDRAULIC EXCAVATORS: 2006 Takeuchi TB016, 7 TELESCOPICFORKLIFTS: 2005 JCB 508C (4x4), (6) 2005 JCB 506C (4x4), SCISSOR LIFT:2006 Genie GR12, AIR COMPRESSOR: 2006 IR P185WJD, WELDER: 2007Miller CST-280, SWEEPER: 2005 Laymor 8HC, SERVICE TRUCK: 2008 FordF550 (s/a), 3 UTILITY TRAILERS: 2008-2006 BestTB102x18, 2007 EZ-DumpBass1810, SUPPORT EQUIPMENT: New Easy Kleen Pressure Washers, 2007ELSE-30 Port-a-power, Avtron LoadBank, Wacker Heater, (4) New Mustang LF88Plate Compactors, New Mustang ML80S Rammers, New Mustang M30 Core Drill,New Mustang MP3 3in. Water Pump, (3) New Mustang MP4800 2in. SubmersiblePumps, (3) New Mustang CV3500 Concrete Vibrators, (12) New 3pc. 14in. DiamondBlades, (6) New 6 packs of 14in. Abrasive Blades, (6) New 4 packs of 10,000lb.Ratchet Cargo Straps, New 5 Ton Digital 4ft. x 4ft. Platform Scales, New Huskie11218 SDS Hammer Drills, (4) New 1in. Drive Air Impact Wrenches, (4) New 1/2in.Drive Air Spray Gun Kits, (6) New 2in. x 50ft. Discharge Water Hoses, (4) New StiffNeck Pintle Hitches.

Address: 6315 Highway 78 West, Bremen, GA 30110.

DIRECTIONS: From Atlanta Airport: take Camp Creek Parkway West to 285N to I-20W to Exit 11. Turn right onto Rt. 27N, go 1 mile to 4th light, turn left, sale site onleft.

SITE PHONE: (770) 537-7386 GA LICENSE: AUNR002859 – Jack Lyon Auctioneer.

AUCTIONATLANTA (BREMEN),

GEORGIA

LIQUIDATION MAJOR TRUCKING COMPANY

25-30 TRUCK TRACTORS, 5 HYDRAULIC BEAVERTAIL EQUIPMENT TRAILERS. QUANTITY OF

VAN TRAILERS, CONSTRUCTION EQUIPMENT FORKLIFTS & SKID STEERS,

SUPPORT EQUIPMENT.


Preparations Efforts Focus on Environmental Impacteasily found. This equipment is quite expensive and requiresa lot of expertise to operate and maintain.”Eight years ago, Great Lakes deepened the channel to 42

ft. (12.8 m) with the same equipment used for phase three.The key will be for the equipment to operate effectively andefficiently, while minimizing any impacts to the surroundingenvironment. Before the dredging began, Great Lakes mobi-lized engineering and project staff to Miami and preppedequipment. “Our crews typically stay with the dredges as they travel

from job to job, so they are experienced and talented,” saidWilliam Hanson, vice president of Great Lakes. “The equip-ment is maintained with the latest automation technology tohelp the operators be as efficient in their operations as possi-ble. The fact that we completed a smaller version of this jobin 2005 is helpful, but this particular deepening has its ownspecific challenges, mostly owing to the scale of the projectand the complex operating conditions working in an activeoperating port.” Crews will primarily use the hopper dredge Terrapin

Island and the cutter suction dredge Texas. Other equipmentmay be used during the project. Previous work has involvedbucket dredges, drillboats, spider barge loaders and materialbarges, as well as workboats, tugs, and numerous pieces ofsupport plant.More than anything, Reichold said communication is cru-

cial as work gets under way.“Outreach and early coordination is key,” said Reichold.

“Miami Harbor is a very active port, and poses many logis-tical challenges of accomplishing the job without disruptionof service. Working with the construction contractor, thePort, the USCG and Biscayne Bay Harbor pilots helps toopen lines of communication to ensure all stakeholdersremain on the same page.” The project has a hefty price tag, which Reichold says can

be difficult to pinpoint.“The Federal Acquisition Regulation requires that when

we solicit bids for a contract, we disclose the magnitude ofthe project in terms of physical characteristics and pricerange, without disclosing the government’s exact estimate.The defense federal acquisition regulation supplement pro-vides parameters, and the government estimate in terms ofthe physical characteristics for this project fell within thedefined price range of $100 million to $250 million.”

The construction area is within an active channel, includ-ing both cruise and cargo in over half the project. This aspectof the project was built into the contract and the projectscope. “Constant communication and coordination between the

USACE, the USCG, the Biscayne Bay harbor pilot and thecontractor will be required and is underway,” said Reichold.“This project includes an excellent plan to meet these chal-lenges and all partners are committed to see everythingthrough.”“In preparation for this dredge project, the Port started out-

reach efforts to stakeholders, Biscayne Bay pilots, the U.S.Coast Guard and others,” said Becky Hope, manager ofPortMiami’s deepening project. “We feel it’s important tokeep everyone updated with the project, have an open line ofcommunication and ensure all parties are part of the coordi-nation effort throughout. “It’s anticipated the contractor will begin dredging in the

outer channels, while creating artificial reefs and building theseagrass restoration area. Over 1,300 corals will also be relo-cating during this base work. The contract’s options areanticipated to be awarded in January 2014, which will allowthe contractor to dredge the inner channel area as well. Thetotal contract is expected to take approximately two years.” As with many massive construction projects, the mini-

mization of environmental impacts can’t be stressed enough,especially when dealing with vulnerable species. “This includes the Florida manatee, five sea turtle species,

American crocodile and bottlenose dolphins, in addition tonumerous important recreational and commercial fishspecies,” said Hope. “Terrestrial and marine habitats sur-rounding the Port include beaches, mangroves, seagrassbeds, and hard bottom and reef communities. Due to theecologically diverse marine resources within the vicinity ofthe Port, this project includes monitoring of adjacentresources by in-water divers twice a week during all activedredging activities. If any unanticipated impacts are noted,the project is designed to have dredging operations in thearea cease until the resources are returned to stable condition. “Designating a marine environment as a ‘National Marine

Sanctuary’ is the highest environmental protection the feder-al government bestows upon water bodies of special nation-al significance. Sanctuaries are managed to protect and con-serve their resources and to allow uses that are compatiblewith resource protection. The Deep Dredge project is utiliz-

ing the same extensive resource and sedimentation-monitor-ing protocols as established for the Florida Keys NationalMarine Sanctuary, for the entire dredge project, making it thefirst Florida port-dredging project to implement the highestenvironmental protection monitoring protocols outside of anational marine sanctuary.” PortMiami is working with all parties to ensure resources

are protected outside of the project, and is committed tolong-term monitoring after the dredging takes place. In addi-tion, PortMiami is committed to protecting our surroundingenvironment in the Biscayne Bay, while serving its commu-nity, to provide a sustainable Port, according to Hope. “An extensive construction safety protocol for construc-

tion activities in addition to a marine mammal watch pro-gram and sedimentation and turbidity monitoring of adjacentseagrass and hardbottom reef communities will be imple-mented during all construction activities, said Reichold.“These programs were developed in coordination with local,state, and federal agencies to ensure protection of all life dur-ing construction.”Miami’s deep dredge project makes the port more com-

petitive with other deep water east coast ports, includingNorfolk and Baltimore. Because of PortMiami’s geograph-ic location, the world’s largest shipping lines offer regularservice from PortMiami to more than 100 countries in morethan 250 ports across the globe. Rebeca Sosa, commission chairwoman of Miami-Dade

county has described the Deep Dredge as one of the mostimportant projects in the Port’s history, while Lynda Bell,commission vice-chairwoman, and head of the commissioncommittee overseeing the seaport, called it a vital economiccatalyst.“PortMiami is South Florida’s second largest economic

engine after Miami International Airport,” Bell said. “Thedredging project will ensure that our seaport remains com-petitive in the global marketplace.” PortMiami is among America’s busiest ports and recog-

nized across the globe with the dual distinction of being theCruise Capital of the World and the Cargo Gateway of theAmericas. PortMiami contributes more than $27 billionannually to the south Florida economy and helps providedirect and indirect employment for more than 207,000.

(This story also can be found on ConstructionEquipment Guide’s Web site at www.constructionequip-mentguide.com.) CEG

PortMiami photoGov. Rick Scott takes a boat ride to check on the progress of the dredging project.

PortMiami photoThe Terrapin Island dredges the Port’s outer channel.

PORTMIAMI from page 8


First sale. No travel. 100% online.

IT PAYS TO BE FIRST.

BUY EARLYJANUARY 28-30, 2014

INSPECTED & GUARANTEED100% ONLINEThese items & much more for sale in the first big auction of 2014

www.ironplanet.com January 28–30

Equipment from

2011 CAT D6N LGP Dozer 2009 CAT CS64Cab Vibratory Compactor

(2) 2008 CAT 725 Artic Trucks

2011 CAT CS56 Vibratory Compactor

2009 CAT 120M Motor Grader 2008 CAT 12M Motor Grader

2011 CAT 336EL Hydraulic Excavator

2007 CAT D6K LGP Dozer

2009 Ford F550 4X4 Service Truck

2005 CAT CB534DXW Vibratory Compactor


Phone: (315) 633-2944 • Fax: (315) 633-8010 • Syracuse, NY (Evenings) (315) 637-8912 www.lyonauction.com

Sales Managers & Auctioneers, Inc.ALEXLYON & SON

Address: 12601 State Rd. 545 North (Avalon Rd.), Winter Garden, FL 34787.FLORIDA AUCTIONEER LICENSE: #AU 0001548, FLORIDA LICENSE: #AB-1091 SITE PHONE: (407) 239-2700

AucTiOn21st Anniversary!

ANNUAL RENTAL RETURNS AUCTION* Construction Equipment, Aerials, Forklifts, Dump Trucks,

Truck Tractors, Trailers, Support & Attachments.

THE GREATEST SALE OF

THE YEAR!9 DAYS OF SELLING!

JACK’S NOTE: Once again we’re returning to Kissimmee with the sale that gets bigger and better each year! It’s recognized as “The Class Sale”, where top-quality EQUIPMENT is the norm, not the exception. You can become part of construction history either as a buyer or a seller. The EQUIPMENT comes from the BEST authorized dealership rental fleets.

*** SPECIAL NOTE: For Non-US Resident Bidders: A $10,000 Cashier’s Check Deposited Prior to Bidding will be Required. * No Exceptions.

DIRECTIONS: From Tampa: I-4E to Rte. 27N for 6.5 miles to Rt.192E for 1 mile. Left on Avalon Rd. for 3 miles to sale site on

left. From Orlando: I-4W to Rt. 192W for 5.5 miles, turn right on Avalon Rd. to sale site.

SATURDAY, FEBRUARY 1st - SUNDAY, FEBRUARY 9th @ 9:00 AM

KISSIMMEE, FLORIDA(WINTER GARDEN)

HILITES: 25 ARTICULATED HAUL TRUCKS: (2) 2011 Cat 740 (3,000hrs.),(2) 2005 Cat 740, (2) 2011 Cat 735, Volvo A40E, 4 STRAIGHT FRAME HAULTRKS, 150 HYDR. EXCAVATORS: (2) Cat 385BL, 2010 Cat 349ELC, (3) 2006Cat 345CL, (3) 2011 Cat 336EL, (2) Cat 330DL, Cat 329EL, (2) Cat 321CLCR, (2)2012 Cat 320EL, 2008 Komatsu PC800LC-8, 2007 Komatsu PC600LC-8, (2) 2013Komatsu PC360LC-10, (4) 2011-2010 Komatsu PC350LC-8, 2010- (3)2008Komatsu PC300LC-8, (2) New 2013 Kobelco SK295LC-9, 2013-2010 DoosanDX140, 3 LONG REACH EXCAVATORS: 2009 Cat 324DLC, 2006 VolvoEC240BLR, RUBBER TIRED EXCAVATORS: 2010 Cat M322, 15 MOTORGRADERS: 2006 Cat 14H, (2) Cat 140M, Cat 16G, (4) 2008 Cat 12M, 6 MOTORSCRAPERS: (4) Cat 631D, 58 RUBBER TIRED LOADERS: Cat 980K, 2010-(3)2007 Cat 980H, 2010 Cat 972H, Unused Cat 966K, 2011 Cat 966K, 2011-2010-2006Cat 966H, 2013 Cat 950K (150 hrs.), 2008 Cat 950H, Cat 938G, (2)2011 Cat 930H,2010 Cat 928HZ, 2012-2011-(3) 2010 Cat 924H, (2) 2010 Liebherr 586, 2010-2008Komatsu WA470-6, 2010 Komatsu WA380-6, 2 SIDE BOOM TRACTORS: (2)2012 Cat, 124 CRAWLER TRACTORS: (2) Cat D9N, Cat D9H, Unused Cat D8T(ripper), 2012 Cat D8T (ripper), 2011 Demo Cat D8T (ripper), 2008-(2)2006-(3)2005 Cat D8T, (5) Cat D8R-II, (2) 2010 Cat D7RXW(ripper), (6) 2006 CatD7RLGP-II, 2007 Cat D6TLGP, 2011 Cat DTXL, Cat D6TXL (cab, winch), CatD6RLGP-II, (3) 2008 Cat D6NXL, Cat D6D (ripper), Cat D5NLGP, JD 1050C,2010 JD 750J, (2) 2006 JD 700J, (3) 2006- (4) 2005 JD 650J, (2) 2010-2006Komatsu D155AX-6 (ripper), (7) 2010 Komatsu D65EX-16 (ripper), 110 TRAC-TOR LOADER BACKHOES: (3) 2009-2008 Cat 450E (4x4), (2) 2011-2009-2008Cat 420E (4x4), (7) Cat 420D (4x4), 2012-(5) 2011 Cat 416E (4x4), (5) Cat 416C(4x4), (2) 2012-(4) 2011 Case 580N (4x4), (3) 2008-(4) 2007 Komatsu WB146-5(4x4), (8) 2008 JD 310J (4x4), PAVERS, 9 ASPHALT ROLLERS: (3) 2010 Cat434D, 2 COMPACTORS: (2) Cat 825B, 68 VIBRATORY ROLLERS: (8)New/Unused Volvo SD115D, (11) New/Unused Volvo SD105DXTF, 2008-(6) 2006IR SD70D, 2011-2010-(3) 2008 IR SD45F, 2010-2008-(11) 2006 IR SD45D, 2009Cat CS64, (3) Cat CS56, (2) Cat CP56, (4) Cat CS533E, 2011 Cat CS553, 2007 CatCS533E, 2005 Cat CS423E, (2) Cat CS423E, (8) 2006 Bomag BW211D-3, (2) JCBVM46D, 25 RUBBER TRACKED SKID STEERS: (2) 2013 Case TV380, 2012Cat 287B, 2012 Cat 272C, (5) Takeuchi TL130, 43 SKID STEERS: Cat 252B, (2)

2011-2009 Cat 246C, 2011 Cat 246, 2005 Cat 242B, (3) 2011 Cat 226B-3, (4) DemoJCB 260, (2) 2012 JCB 225, (2) 2010 Bobcat S630, TRENCHERS, 81 TELE-SCOPIC FORKLIFTS: (2) Cat TL1055(cab), (4) 2011- 2010-(3) 2008 Cat TL943,Cat TH460B, Cat TH360B, 2005 JLG G12-55A (4x4), 2007 Dieci XRM7.732, (4)2007 Dieci XRM6.621, (3) 2008-2007 Dieci XRM 6.221, (6) 2008 Dieci XRM5.519,(2) 2006 JCB 550 (4x4), (7) 2005 JCB 52050 (4x4), 2006-(2) 2005 JCB 520 (4x4),(5) JCB 506CHL(4x4), 2006- (3) 2005 JCB 506C (4x4), 63 BOOM LIFTS: New2014 JLG 1350SJP (4x4), New 2014 JLG 800S (4x4), (4) JLG 450AJ (4x4), (2) JLG400S (4x4),(10) JLG 400S (4x4), (4) JLG E400AN, (2) Snorkel TB126J, (3) GenieS60 (4x4), 72 SCISSOR LIFTS: Genie GS3384RT, (2) Genie GS3246, (5) 2007Genie GS3268RT, (2) Skyjack 4626, Skyjack 3226, (4) 2006-2005 Skyjack 3219, (8)Skyjack 3219, 23 AIR COMPRESSORS: 2006 IR XP750WCU, 2006 IRXP375WCU, 2008-2007 Atlas Copco XAS375JD6, 2008 Sullair 375(high pressure),18 GENERATORS: Cat D343A, 34 WELDERS: (6) 2008-2007 MillerBB500CCCV, 2006 Miller Big Blue 400, 88 LIGHT PLANTS: (2) 2013- (3) 2012Doosan 60HZ-T, 2013-2012 Doosan LSCWKUB, (10) 2013 IR, (3) 2010-(4) 2008IR Light Source, 44 WATER PUMPS: (2) 2007-(5) 2006 Pioneer, (15) 2011-2008Magnum MTP6000D, (3) 2012 –(14) 2011Magnum MTP4000D, 5 AIR WINCHES,SCREENING PLANTS: Extec S-5, 15 AG. TRACTORS: 2012 KubotaM9960HDC (4x4), (6) 2010 Challenger MT465B (4x4), 7 SWEEPERS: (2) 2011Blaw Knox FB90 (cab, 400hrs.), 7 CONCRETE MIXER TRKS: (5) 2006-(2)2002 Peterbilt (t/a), BOOM TRK: 2007 Sterling (40 ton), 19 WATER TRKS: (2)2005 Ford F650 (s/a), 2007- (2) 2004-2003-2001 Mack 4000gal. (t/a), 7 ROLL-BACK TRKS: 2008 Peterbilt 340 w/Jerr-Dan 815TRB(t/a), 27 TRUCK TRAC-TORS: 2013 Kenworth W900 (tri.), (4) 2010- (2)2009 Mack CH613 (t/a), 25DUMP TRUCKS: (3) 2007 Mack(tri.), FUEL/ LUBE TRK, 10 AMBULANCES/MEDICAL VANS: 2011-(4) 2006-(2) 2005 –(2) 2003 Ford E350 (Fully LoadedAmbulances!), 2008 Ford F250 Wheelchair Van, MOTOR HOME: 2007Fleetwood Bounder 34ft. (s/a), 16 DETACHABLE GOOSNECK TRAILERS: (2)2014 Fontaine Magnitude 55L (tri.), 2013 Witzco RG-60 62.5 ton (quad.), (7) 2014Witzco 50 T (tri.), (2) 2014 Witzco 35 T (tri.), 8 EQUIP. TRAILERS: 2005-(7)2004 Trailking TK70HT (t/a), 2 DETACHABLE REAR BRIDGE TRAILERS:(2) 2014, 18 RECREATIONAL & UTILITY VEHICLES, 390 TIRES/RECAPS.


Judicial Center IncorporatesEnergy-Efficient Systemselevator. The detention center vans pull intoa sally port to load and unload the inmateswho are being held into custody, waiting fortheir day in court.

“As on many projects, budgets are alwaystight and this one had challenges,” Gressettesaid. “Courthouses have to have more circu-lation spaces than most buildings, so normalnet/gross efficiency is not in play. Also, dueto appropriate finishes and security monitor-ing, a higher cost/square foot needs to beconsidered. Thus, more square footage at ahigher budget causes issues.”

The building style is neo-traditional, fea-turing brick and cast stone veneer as the pri-mary exterior materials. The entry and sideporches combine glass curtain-wall withcolumns.

“A courthouse is a direct reflection of thecommunity in which it is built, saidGressette. “Most people take pride in theircourthouse, which should evoke perma-nence and the decorum and fairness of thejustice system. A new courthouse also makesit easier to address the various needs of thetax-paying citizens of the county. Computer-assisted services offer visitor’s quickanswers. The court scheduling and otheraspects of case management align withdirectives from the South Carolina SupremeCourt.”

Although not aiming for LEED certifica-tion, the Judicial center incorporates mostnormal energy-efficient systems. For per-formance and noise considerations, air-cooled chillers located off the building wereutilized to provide chilled water-cooling tothe units that supply air to the building. Inorder to reduce the amount of outdoor airbeing provided to the building, demand con-trol ventilation was used in spaces that havevarying occupancy. This saves energy byminimizing the amount of outdoor air thathas to be cooled. To save water, pint flushurinals were installed. The power consump-tion of the lighting system is 15 percentbelow the code limitations.

“Considering the initial vision and goals,”said Gressette, “I think it’s important for thevisitors and Sumter County citizens to beproud of their new courthouse, to be assuredthat the design-construction team was a goodsteward of tax-payer money, that the build-ing is functionally sound and safe, and thatthe courthouse enjoys being a distinguishedfocal point for the community.”

SIFCO Mechanical, Inc., recognized asSumter’s oldest continuing business enter-prise, was contracted in a pre-constructionrole to meet and work with the HVAC engi-neers from the design development through

the construction drawing process. AllenGoff, owner of SIFCO Mechanical saidcommunication at all times was key.

“The interior of a courthouse facilityincludes many wood and cabinetry features,which sometime limit the above ceilingspace where the heating and cooling systemsare located, said Goff. “Close coordinationwith all trades was necessary.

“The heating and cooling generation wasdesigned to utilize air cooled chillers forcooling and gas fired hot water boilers forheating. These components of the systemwere located outdoors to allow for remotelocation to avoid any possible sound trans-missions into the building. Air movingequipment was all located on the concreteroof slab, as was most large ductwork.Underground chilled and hot water pipingwas buried approximately five feet deep toenter into the building. Excavation and back-fill was accomplished via track hoe. Roofmounted air handlers and ductwork wererigged via 60-ton hydraulic crane.”

All ductwork was shop fabricated andfield installed by Prewitt Sheetmetal Worksin Lugoff, S.C. The project included approx-imately 70,000 lbs. (31,751.5 kg) of galva-nized metal, ranging from 26 to 18 gauge.The chilled and hot water piping was fur-nished and installed by SIFCO. The projectincluded approximately 6,000 linear ft.(1828.8 m) of piping ranging from 6 in.(15.2 cm) to .75 in. (1.9 cm) black steel andcopper.

“All workers had to have security back-ground checks in order to gain access to thesite,” said Goff . “The heating and coolingsystems were designed with security gradeair distribution grills in all secure areas, suchas holding rooms and lawyer/client confer-ence rooms.The Sumter County Courthouseproject is of historical significance to ourcounty, and we were extremely honored tohave been a part of the overall project.”

“I believe the employees of every depart-ment have thoroughly enjoyed the new facil-ity,” said Campbell. “The public is veryimpressed with the building when I givethem tours. It was the talk of the town whenconstruction was going on. To watch thisbuilding come from images on paper to con-crete footers and steel beams being erectedwas a personal joy, knowing this is thelargest project in our county’s history.”

(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)CEG

SUMTER from page 32

1670 Commerce RoadHolland, OH 43528www.yoderandfrey.com

Sale Conducted By:Phone: 419-865-3990

Fax: 419-865-4595Email: [email protected]

ONE OWNER - ABSOLUTE AUCTION

CONSTRUCTION EQUIPMENT - TRUCKS & TRAILERSSTRICKLER BROS., INC.

4176 CANAL STREET, FT. MYERS, FL 33916

FRIDAY, JANUARY 31, 2014 - 10:00 AM

CRAWLER TRACTORS: 2005 KOMATSU D31PX-12; 1999 CASE 550G WT; 1998 CASE 550G WT;RUBBER TIRED LOADERS: 2005 KOMATSU WA250-5; 2001 KOMATSU WA250, (2) 2005KOMATSU WA200L-5; KOMATSU WA180 (ALL HAVE FORKS, BUCKETS); EXCAVATORS: 2002KOMATSU PC400LC-6; 2006 KOMATSU PC220LC; 2000 KOMATSU 220LC; 2004 KOMATSUPC138; 1997 KOMATSU PC100-6; 2003 KOBELCO SK330 (ALL HAVE ADDITIONAL BUCKETS);MINI EXCAVATORS: 2008 KOMATSU PC27MR-2; (2) 2005 KOMATSU PC27MR-2; 2004 KOMATSUPC27; SKID STEER LOADER: 2008 CATERPILLAR 297C, ENCL. CAB; LOADER BACKHOES:2005 KOMATSU 4X4 WB150-2; 2005 KOMATSU 4X4 WB150; 2002 KOMATSU 4X4 WB150-2; 2000CASE 4X4 590SL; 1997 CASE 580L (ALL KOMATSU LDR/BKHOES HAVE EXTENDAHOE);HYDRAULIC HAMMERS: ATLAS COPCO, FITS PC27MR-2; 3000# NPK 210A; SINGLE DRUMVIBRATORY ROLLERS: 2001 NEW HOLLAND CV700D; BOMAG BW177D-3; TANDEM ROLLER:MAULDIN; MOTOR GRADER: 2005 NORAM; DIRECTIONAL BORING MACHINES: 1999AMERICAN AUGER DD60, RIPPENATOR 36" PACK; 1997 VERMEER NAVIGATOR D24X40;FUSION EQUIPMENT: MCELROY 3600712; MCELROY 412; CENTRAL ELECTRO FUSION SYS-TEM COUPLINGS; BROOM & VAC: LAYMOR 8HC; VERMEER E800 EVACULATOR VAC W/TRAILER; PUMPS: (7) MUD HOG TRASH; STONE & TRENCH BOXES: (2) 2005 TRENCH BOXES;2005 M&R GRAVEL BOX; MISCELLANEOUS: AIR COMPRESSORS; CHAIN SAWS; CUT SAWS;TAMPERS; PLATE COMPACTORS, ETC.; DUMP TRUCKS: 1999 FREIGHTLINER T/A; 1997 INTER-NATIONAL S/A; 1996 INTERNATIONAL S/A; SERVICE TRUCKS: 2003 CHEVROLET 3500; 2001FORD F450; 2001 FORD F350; BOX TRUCK: 2001 FORD E350; PICKUP TRUCKS: 2008 FORDF350; 2001 FORD F350; 2008 FORD F250; TRAILERS: 2006 ROLLS-RITE 24 TON; 1999 COBRA 12TON; 2005 ROLLS-RITE 7 TON; 2004 ROLLS-RITE 6 TON; 1999 TCF BOBCAT; (2)2007 TRIPLECROWN; 1998 TRIPLE CROWN; 2004 EXPRESS; 2004 A-OK; 2003 EAGER BEAVER; 2002 HAUL-MARK; (5) OFFICE TRAILERS

Terms: Payment in full on Sale Day by Cash, Cashier’s Check or Certified Checks. Personal and Company Checks MUSThave bank letter of guarantee. Additional terms can be found in the sale day catalog. Note: There is a FIVE (5%) percentbuyer’s premium.

V. Peter Clark, License #AU2863 FL Firm Lic# AB2485

Please check our website (www.yoderandfrey.com) and future advertising for updated information. Please call 1-800-842-6221 for more information.

Bill Newman's Extensive Antique Tractor CollectionFEATURING MANY RARE MINNEAPOLIS-MOLINE, OLIVER, MASSEY FERGUSON, JOHN

DEERE AND CASE TRACTORS, PARTS, ENGINES, PEDAL TRACTORS, MEMORIBILIA,HOLT & CATERPILLAR HISTORICAL CONSTRUCTION EQUIPMENT, AND MUCH MORE

Terms: Payment in full on Sale Day by Cash, Cashier’s Check or Certified Checks. Personal and Company ChecksMUST have bank letter of guarantee. Additional terms can be found in the sale day catalog. Note: There is a SEVEN(7%) percent buyer’s premium, additional buyers premium applies for successful internet bidders.

Auctioneer: V. Peter Clark, Lic # AU2863 FL Firm Lic # AB2485Please check our website (www.yoderandfrey.com) and future advertising for updated information.

1670 Commerce RoadHolland, OH 43528www.yoderandfrey.com

Sale Conducted By:Phone: 419-865-3990

Fax: 419-865-4595Email: [email protected]

ABSOLUTE ANTIQUE TRACTOR AUCTIONPARTIAL LIQUIDATION - BILL NEWMAN COLLECTION

2475 HICKORY TREE ROAD, ST. CLOUD, FLORIDA 34772TUESDAY, FEBRUARY 18, 2014

Online & Absentee Bidding will be provided. Visit our website atwww.yoderandfrey.com for more information and to BID ONLINE!

Note: There is an additional 2% buyer’s premium for Online & Absentee Bidders.


Three leaders in transportation academia, five studentsand one long-time industry advocate will be honored Jan. 11,2014, by the Council of University Transportation Centers(CUTC) for their outstanding contributions to transportationresearch and education.Honorees will be recognized during CUTC’s 17th Annual

Awards Banquet in Washington, D.C., and awards will bepresented in these categories:

The Lifetime Achievement in TransportationResearch & Education: Recognizes individuals who havecontributed immensely throughout their professional lives totransportation research and education by working in govern-ment, business or non-governmental organizations.• Rod Diridon Sr., executive director, Mineta National

Transit Research Consortium and the Mineta TransportationInstitute

Distinguished Contribution to UniversityTransportation and Research: Given to individuals whohave had a long history of significant and outstanding con-tribution to university-level transportation education andresearch.• Genevieve Giuliano, Ph.D., professor and John Ferraro

chair in effective local government and senior associate deanfor research and technology, University of SouthernCalifornia�

CUTC-ARTBA New Faculty Award: Presented totenure-track educators in recognition of outstanding teachingand research contributions.• Amit Bhasin, Ph.D., assistant professor, The University

of Texas-AustinCUTC-ARTBA Administrative Leadership Award:

Honors individuals in a staff position or non-tenure-trackfaculty position who make outstanding administrative lead-ership contributions to the transportation field by non-aca-demic appointments.• Patrick Szary, Ph.D., associate director, Center for

Advanced Infrastructure and Transportation (CAIT) atRutgers -The State University of New Jersey

Milton Pikarsky Award: Presented to two graduate stu-dents in the transportation field for best doctoral dissertationand M.S. thesis with an emphasis on science and technolo-gy.• Rajesh Paleti, The University of Texas at Austin• Sriram Narayanamoorth, The University of Texas at

AustinCharlie V. Wootan Award:Given annually to two grad-

uate students in the transportation field for the best doctoraldissertation and M.S. thesis with an emphasis on policy andplanning.• Ranjit Godavarthy, Ph.D., Kansas State University• Christina Bernado, The University of Texas at AustinNeville A. Parker Award: Recognizes the best non-the-

sis paper in transportation submitted for the M.S. degree inlieu of a thesis, in the areas of policy & planning.• Martin Barna, San Jose State UniversityFor more information, visit http://mycutc.com.(This story also can be found on Construction Equipment


CUTC Set to HonorAchievements of Nine Individuals


ADVERTISER INDEX

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

ALEX LYON & SON INCKISSIMMEE FL ......................................................................75ATLANTA GA..........................................................................71

ALLU GROUP) ..............................................................................53AMERICAN CRUSHERS................................................................50ANACONDA USA ..........................................................................45ASC CONSTRUCTION EQUIPMENT USA ............................2,3,10ATI CORPORTATION/LEVEL-BEST ..............................................25ATLANTIC EQUIPMENT & SUPPLY INC ......................................22BANDIT INDUSTRIES INC ............................................................49BARGAINS ....................................................................................68BRANDYWINE TRUCKS & EQUIPMENT......................................21BROOKS SALES INC ....................................................................19CAROLINA CAT ........................................................................14-17CATERPILLAR................................................................................41CCS & QUEST EQUIPMENT ........................................................11CEG SCALE MODELS ..................................................................66CLASSIFIEDS ................................................................................68CON-EQUIPMENT OF THE CAROLINAS ....................................19CONEXPO......................................................................................29CONSTRUCTION EQUIPMENT GUIDE

AUCTION PROFILE PROMO................................................74NEWSLETTERS ....................................................................55WANTED................................................................................69CONEX/CONAGG..................................................................30

DOOSAN INFRACORE AMERICA ................................................62DOOSAN PORTABLE POWER......................................................34DYNAPAC ......................................................................................64EAGER BEAVER TRAILERS ........................................................37FELLING TRAILERS ......................................................................38FLANGE LOCK ..............................................................................31FLECO ATTACHMENTS ................................................................54G S EQUIPMENT ............................................................................9GEHL ..............................................................................................64GRINDERCRUSHERSCREEN.COM ............................................48GROVE WORLDWIDE ..................................................................79HILLS MACHINERY COMPANY ....................................................80HITACHI CONSTRUCTION MACHINERY................................56,57HYDRAULICIRCUIT TECHNOLOGY ............................................54INTERSTATE EQUIPMENT CO ....................................................20

IROCK CRUSHERS ......................................................................46IRON PLANET................................................................................73JOHN DEERE ................................................................................33KAWASAKI CONSTRUCTION MACHINERY ................................63KLEEMAN ......................................................................................43KOMATSU AMERICA CORP..........................................................67KPI-JCI ..........................................................................................40KUBOTA EXCAVATOR ..................................................................61KUHN EQUIPMENT SALES INC ..................................................47LINDER INDUSTRIAL MACHINERY CO ........................................5MAXIMUM GROUP ........................................................................21MAY HEAVY EQUIPMENT ..............................................................7MOBILE TRACK SOLUTIONS ......................................................21MOBRO MARINE INC ....................................................................6MOROOKA USA ............................................................................23NATIONAL ATTACHMENTS ..........................................................54NORAM ..........................................................................................65NORTH AMERICAN ATTACHMENTS............................................52NORTRAX EQUIPMENT CO FL ..............................................25,31PEMBERTON INC..........................................................................54RANSOME EQUIPMENT SALES LLC ..........................................69ROAD BUILDERS MACHINERY....................................................25SANY AMERICA INC......................................................................58SCHAEFER ENTERPRISES..........................................................52SCREEN MACHINE INDUSTRIES INC ........................................46SENNEBOGEN ..............................................................................42SOLESBEES EQUIP & ATTACHMENTS ......................................53SOUTHEASTERN EQUIPMENT CORP ........................................19SOUTHERN SHOWS

RALEIGH NC ........................................................................20SULLIVAN PALATEK......................................................................22SUPERIOR INDUSTRIES ..............................................................48TAR HEEL ......................................................................................13TEREX CRANES............................................................................59THOMPSON MACHINERY USED PARTS ....................................52TOWMASTER INC ........................................................................36TRENCH SHORING SERVICES....................................................28YODER & FREY AUCTIONEERS

FT MYERS / ST CLOUD........................................................76KISSIMMEE ..........................................................................77

To read articles about these CEG advertisers, visit www.constructionequipmentguide.com


Birmingham, AL205-841-6666Mobile, AL 36608251-633-4020Montgomery, AL334-262-6642Pensacola, FL

850-479-3004

Huntsville, AL256-536-9390Decatur, AL

256-350-0006Oxford, AL

256-832-5053

Springdale, AR479-927-1672Little Rock, AR

501-568-7867Shreveport, LA318-746-5272Alexandria, LA

318-443-7173Lafayette, LA

337-837-9600

Lake Charles, LA337-528-2661Baton Rouge, LA225-356-6113

Kenner, LA504-467-5906Memphis, TN

901-375-4902Nashville, TN

615-248-0266

Chattanooga, TN423-499-7700

Arden, NC828-684-1692Charlotte, NC

704-504-2870Raleigh, NC

919-781-9454Winston-Salem, NC

336-767-6900

Chesapeake, VA757-295-4944Ashland, VA

804-798-9740Roanoke, VA

540-362-3600Warrenton, VA

540-349-2878

www.cowin.com www.HE-equipment.com


North Carolina

South Carolina

Call Today!

F Series Wheel Loaders

8 models

oday!Call T Today!

.hillsmachinerwww

.comy.hillsmachiner

252-758-4163FaxPhone 252-752-7145877-549-3232

eenville, NC 27834Greet315 Easy Str

eenvilleGrNorth Carolina

Fax Phone 919-746-7938888-986-8680Raleigh, NC 276041501 Hedingham Blvd.Raleigh

Fax Phone888-830-5939Columbia, SC 292091014 Atlas WColumbiaSouth Carolina

919-746-7939Fax Phone 919-746-7938888-986-8680Raleigh, NC 276041501 Hedingham Blvd.Raleigh

FaxPhone866-830-7577North Charleston, SC 294187168B CrCharleston

803-233-4482Fax 803-658-0200Phone

888-830-5939Columbia, SC 29209

ay 1014 Atlas WColumbiaSouth Carolina

843-225-9378843-225-9377

866-830-7577North Charleston, SC 29418

oss County Road 7168B CrCharleston

southeast 01 2014

Documents