sers manal - ams diffusion · nhl combine 2 use the original monitor intelliview can be connected 3...
TRANSCRIPT
DESI
GNED BY AMS • ASSEMBLED BY AMS •
FRANCE
www.ams-diffusion.com
NHL COMBINE 2
USE The original monitor INTELLIVIEW can be connected 3 dedicated cables1 dedicated cable can be connected 1 AMS camera.You can connect up to 6 AMS cameras using 6 dedicated cables NHL COMBINE 2 and 2 INTELLIVIEW IV monitors in your CR7, CR8, CR9 and CR10 New Holland combine produced from January 2015.
Dedicated cableVICAM-AMS-NHL COMBINE 2
an AMS camera VICAM-AMS-CAM-PAL* Extension cable from 2 to 20 m VICAM-AMS-CR2 À 20
Your original monitor INTELLIVIEW IV*
*CAUTION : Camera and original monitor are not included. All the AMS cameras are compatible with this dedicated cable.
PRODUCTS NEEDED
YOUR ORIGINAL MONITOR INTELLIVIEW IV*
DEDICATED CABLE
NHL COMBINE 2 X1
AN AMS CAMERA X1*
USER’S MANUAL
www.ams-diffusion.com
NHL COMBINE 2
3. Connect the camera cable with the dedicated cable NHL COMBINE 2 (4-pin connector).
4. Install the camera and connect the extension cable CR (from 2 to 20 metres), feed the cable from the camera to the connector used.
USER’S MANUAL
EXTENSION CABLE
AN AMS CAMERA
NHL COMBINE 2
CONNECTOR
2. Connect the video cable of the machine (Deutsh 4 male pins) under the cab with the adaptor NHL COMBINE 2 (Deutsh 4 female ways).
1. Locate the empty connectors ramp affected to the video under the front of the cab.
INSTALLATION INSTRUCTIONS
INTELLIVIEW IV (DISPLAY 2)
N°2
SOUS LA CABINE
9. If a camera is not displayed when needed (e.g. rear-view camera while you are emptying through the tube) do not disconnect the cameras, but the change the camera function 1, 2 or 3.
8. Select the functions of each camera. For example: ▪ Camera 1: Rear-view camera▪ Camera 2: Default▪ Camera 3: Emptying screw
6. To enable the video function: Check that the cameras have been detected by the monitor INTELLIVIEW.
7. In Camera, press on Configurations.5. Press the Diagnostics button.
CONNECTIONS
BEAM
Legend :
2nd Intelliview monitor in option
INTELLIVIEW IV (DISPLAY 1) N°1
DISPLAY 2 DISPLAY 1C3 C2 C1 C3 C2 C1
RECOMMENDATIONS If your monitor INTELLIVIEW does not have a video input management system, contact CNH for an update of the system. You need at least version v.21 of the software. INTELLIVIEW.
WARRANTY The product is guaranteed for two years as from the date of sale to the end user, remembering that the sale must take place within 24 months after delivery to the concession.
AFTER SALES SERVICE Reserved for professionals: > Download the service form from our site www.ams-diffusion.com/aftersale/ When returning, please include the following documents for managing repairs and the warranty:> The return-authorisation form duly completed> A copy of the invoice with the date of sale to the end user> The reason for the claim, or a description of the malfunction. > For more information, contact our technical department Tel : +33 (0)3 27 94 44 44 or @ : [email protected] If you are the end user: Please go to your dealer.
www.ams-diffusion.com
USER’S MANUALNHL COMBINE 2
Tel : +33 (0)3 27 94 44 44 - Fax : +33 (0)3 27 94 44 45 - @ : [email protected] AMS - Rue des Galeries - Z.A. du Chevalement - 59286 ROOST WARENDIN - France
RCS DOUAI A 451 360 382 - CODE APE 4531Z - SIRET 451 360 382 00035 - TVA FR 55 451 360 382 v1-072014