ø406.4

31

25

200

InletSERVICE

N4

N2N1

ITEM

N3

RF Outlet

10"1

RATINGQTY. NPS

TYPE

NOZZLES11 1"

1 10"

Drain300# Vent

Longitudinal moment, Ml

Longitudinal load, Vl

Circunferential load, VcCircunferential moment, Mc

Torsional moment, Mt

LOADS AND MOMENTS SHELL-NOZZLES

LOADS AND MOMENTS SHELL-NOZZLES

LOADS AND MOMENTS SHELL-NOZZLES

LOADS AND MOMENTS SHELL-NOZZLES

LOADS AND MOMENTS SHELL-NOZZLES

LOADS AND MOMENTS SHELL-NOZZLES

LOADS AND MOMENTS SHELL-NOZZLES

NOZZLERadial load, P

INLET N1

MtMtMtMtMtMtMtMl

Vc P

3000# NPT3000# NPT

RF300#

5.000 N-m 4.250 N-m

11.000 N

8.000 N 2.800 N·m

7.000 N

Manufactured by:Xina Solar One

1"

and Safety Act. 1993 (Act No. 85 of 1993)Serial No:Design Code:

Design Data

Design Code

Design Pressure

FluidASME B&PVC Sec. VIII Div.1 Ed. 2013

2

11

N3

8

N2

7

12

NORTEMECÁNICA designs and manufactures filtering equipment and filtration systems for both liquid and gas.

Our manufacturing programme includes the following different types:

- Basket strainers - Cartridge filters - Bag filters - Self-cleaning strainers - Tee strainers - Y strainers - Temporary conical strainers - Sand filters - Activated-carbon filters

Área Industrial de Tabaza I, parcela E-5, E-33469 Carreño, Asturias Tel. +34 985 579 857

www.nortemecanica.es

Manufacturing Programme

200

2

11Filtration forPower Stations andPetrochemical Plants

780

Power Stations andPetrochemical Plants

270

780

1050

6

2

1

"A""A""A"

502

502

R398

183

94

51

29

600 600

872

675300

190

Ă60

10

Ă60

Tubo 80x40x4

100

193.5

100 12

0

Ă82.5

Ă61

e=12

193.5

Ă88.9

75

360

200

170

15

R50

R406.5

263120

R30

55

Ă29

MATERIAL

ESCALA

POS. NºPZAS.

PESO Kg.

DENOMINACIÓN

MATERIAL

ESCALA

POS. NºPZAS.

PESO Kg.

POS. NºPZAS.NºPZAS.

DIN 931DIN 931

CASQUILLO GUIA GATOMANGUITO SUJECIÓN 6x16

2

DIN 1481DIN 1481

s/plano NM-2445/01/17J

CASQUILLO GUIA GATO

s

/plano NM-2445/01/17J

CASQUILLO GUIA GATO

A

B

C

F

LIN

EA D

E PL

EGA

DO

LIN

EA D

E PL

EGA

DO

DESARROLLO

S275JR1/2

214A

S275JR1/2

214DLPN 50x50x5x719

18

The basic data for the design and thickness calculation are the following ones:

- Filtrating degree - Allowable pressure loss - Filtering surface - Type of cleaning - Flow rate - Pressure - Temperature - Fluid - Materials - Corrosion over thickness - Connections - Space limitations, etc.

At the same time manufacturing is being carried out, a Quality Dossier is being prepared and it will include the following documents:

- Procedures followed - Quality certificates of materials - Welders’ certificate of compliance - Non-destructive trial reports - EC Marking and Compliance Declaration - ASME Data Report - As-Built drawings - Other documents required by the

Customer or the technical or legal regulations.

Design

Quality CertificatesManufacturingManufacturing of filtering equipment and filtration systems is carried out in our facilities in Tabaza, Asturias.

Based on the drawings approved by the customer, our technical department begins the manufacturing process. The customer is invited to be present at any time in any stage of the manufacturing process to check its condition, as well as to attend the final tests required in the specifications or in the design code to be implemented for each case

With reference to the final tests - either the pressure or the operation tests - a certified public body will be responsible for their verification if required by the Customer, Design Code or the EC compliance evaluation procedure.

After manufacturing has been finished, equipment surface is submitted to the relevant treatment and it is prepared for transportation.

In NORTEMECÁNICA we have all the necessary means and resources for the design and manufacturing of filtering equipment and filtration systems.

Based on each customer’s needs and specifications, we make the design of filtering equipment based on the codes to be implemented for each case, i.e. the ASME American code (with optional U stamp), the AD-Merkblatt German code or the EN-13445 European Standard, fulfilling the provisions specified in the Pressure Equipment Directive PED 2014/68/EU.

NºPZAS.

DENOMINACIÓN

CHAPA SOPORTENºPZAS.

DENOMINACIÓN

CHAPA SOPORTE

E J

C

F

Our Quality Management System has been certified by Lloyd’s Register Quality Assurance according to the Quality Assurance Standard ISO 9001:2008.

NORTEMECÁNICA has been certified as manufacturer according to the AD-2000-Merkblatt HP 0 and the EN ISO 3834-2 by TÜV SÜD Industrie Service GmbH.

The company is authorized by ASME (American Society of Mechanical Engineers) as manufacturer of pressure equipment. We have been granted the U seal.

ECA Bureau Veritas has certified that our Quality System fulfils the requirements specified in Module H of the Pressure Equipment Directive PED 2014/68/EU.

Some references - Combined Cycle Power Plant “TARRAGONA I”, Tarragona, Spain (2002) - Combined Cycle Power Plant “ARCOS I” and “ARCOS II”. Cádiz, Spain (2004) - Combined Cycle Power Plant “ACECA”, Toledo, Spain (2005) - Delayer Coker Complex. “Refinería Aconcagua”, Concón, Chile (2006) - Combined Cycle Power Plant “HADJRET IN NOUSS”, Tipaza, Algeria (2008) - Combined Cycle Power Plant “MOERRDIJK”, Brabante, Holland (2010) - Thermo-Solar Power Plant “VALLESOL 1” and “VALLESOL 2”, Cádiz, Spain (2011) - Thermo-Solar Power Plant “LA AFRICANA”, Córdoba, Spain (2012) - Thermo-Solar Power Plant “GENESIS SOLAR ENERGY”, Riverside County, California, USA (2012) - Combined Cycle Power Plant “GREAT ISLAND”, Leinster, Ireland (2013) - Thermo-Solar Power Plant “BOKPOORT CSP”, NORTHERN Cape, South African Republic (2014) - Thermo-Solar “ASHALIM CPS”, Be’er Sheva, Israel (2016)