sentey cases - filedn.com · ranuras de expansión 3.5” internal bays bahías int. de 3.5”:...
TRANSCRIPT
SS1-2420SS1-2421SS1-2422
www.sentey.com
USER MANUALMANUAL DEL USUARIO
SENTEY CASES
FEATURES: SLIM SERIE 1CARACTERÍSTICAS: SLIM SERIE 1
2420 2421 2421
Case type
Tipo de Gabinete
Expansion Slots
Ranuras de Expansión
3.5” Internal Bays
Bahías Int. de 3.5”:
Front Material
Material del frente
Clamps included
Clamps incluìdos
Side panel
Panel lateral
Frontal Ports
Puertos Frontales
Motherboard holders
Soportes de motherboard
3.5” External Bays
Bahías Ext. de 3.5”:
Weight
Peso
Material
Material
Bay foldable covers
Tapas de bahìa rebatibles
Color
Color
LCD panel
Panel LCD
Motherboards supported
Motherboards soportados
Power Supply Included
Fuente Incorporada
5.25” Bays
Bahías de 5.25”:
Size
Dimensiones
Mid Tower
Mid Tower
4 - Low Profile
4 - Bajo Perfil
1
1
Plastic
Plástico
No
No
Solid
Sólido
USB 2.0, Audio & Mic
USB 2.0, Audio y Micrófono
Bronze screws
Tornillos de bronce
1
1
5 kg
5 kg
Laminated steel SECC 0,5 mm
Acero Laminado SECC 0,5mm
1
1
Bright Black
Negro Brillante
Yes
Sí
Micro ATX, Mini ITX
Micro ATX, Mini ITX
BCP-450OS
BCP-450OS
1
1
400 mm x 104 mm x 325 mm
400 mm x 104 mm x 325 mm
LCD DISPLAYSDISPLAYS LCD
Fan display
Display de fan.
Speaker Volume
Volumen de beep.
Internal temperature
Temperatura interna.
Fan use (percentage)
Uso del fan (Porcentaje)
H.D.D. Activity
Actividad del H.D.D.
Power
Energía.
Control Buttons
Botones de Control.
3-BUTTON DISPLAY BUTTON FUNCTIONS
SPECIAL FEATURES
DISPLAY DE 3 BOTONES FUNCIONES DE BOTONES
CARACTERISTICAS ESPECIALES
Setting the temperature of cooling fan operation
Ajusta la temperatura del fan.
Raises the value
Aumenta el valor
Lowers the value
Disminuye el valor
1XTemperature control, in both Celsius and Farenheit degrees.
Control de temperatura en grados Celsius y Farenheit.
XSpecial fan, manually controlled from the LCD display.
Fan controlado desde el display LCD.
XSetting range: from 20 to 79. When the inner temperature raises over the set value, the display color changes, an alarm beeps and the fan is set to 100% RPM until 10 minutes after the temperature descends from the setting value.
Rango de seteo: de 20 a 79. Cuando la temperatura interna supera el valor seteado, el display cambia de color, suena un beep de alarma y prende el fan al 100% de RPM hasta 10 minutos después que la temperatura descienda del valor seteado.
XFan cooler icon in LCD display.
Ícono del fan cooler en el display.
XAutomatic beep when the temperature raises over the 40º, 50º and 60º C.
Beep de alarma automático al superar los 40º, 50º y 60º Celsius.
XHDD reading. Lectura de HDD.
B
WIRING DIAGRAMS BACK SIDEPOWER SUPPLYDIAGRAMA DE CONECTORES PARTE TRASERAFUENTE DE ALIMENTACIÓN
REMOVING SIDE COVERS INSTALLING 3.5 EXTERNAL DRIVE
CONNECTORS
INSTALLING 3.5 INTERNAL DRIVE
REMOVING THE MULTI-BAY TRAY
USB WIRING DIAGRAM
AUDIO WIRING DIAGRAM
EXTRAYENDO PANELES LATERALES INSTALANDO LA UNIDAD EXTERNA 3.5
CONECTORES
INSTALANDO LA UNIDAD INTERNA 3.5
EXTRAYENDO BANDEJA MULTI-BAHIA
DIAGRAMA DE CONECTORES USB
DIAGRAMA DE CONECTORES DE AUDIO
A C D 1
2Extract the 4 screws and slide the cover towards the back side of the case. Lift the cover.
Extraiga los 4 tornillos manuales. Deslice las tapas laterales hacia la parte trasera y levante.
To remove the multi-bay tray, unscrew it from the chassis and lift up.
Saque los dos tornillos que sujetan la bandeja al chassis y levántela para sacarla del gabinete.
Remove the multi-bay tray from the case.
Retire la bandeja multi-bahía del gabinete.
Remove the multi-bay tray from the case.
Retire la bandeja multi-bahía del gabinete.
Insert the optic drive in the corresponding bay.
Inserte la unidad óptica en la bahía correspondiente.
Insert the optic drive in the corresponding bay.
Inserte la unidad óptica en la bahía correspondiente.
Adjust the screws until the drive is firmly held.
Ajuste los tornillos hasta dejarlo en posición firme.
Adjust the screws until the drive is firmly held.
Ajuste los tornillos hasta dejarlo en posición firme.
1 1 1
2 2 2
3 3
3
20+4 Pin Motherboard x 1
Connector Floppy Disk x 1
Connector Sata x 1
Connector Molex x 4
Connector 4 Pin CPU 12v x 1
Power supply
Fuente de alimentación
Airing grille
Rejillas de ventilación
PCI Card sockets
Ranuras para tarjetas PCI
PIECES INCLUDEDACCESORIOS
X14 tornillos cabeza solapada (Mother-ODD).X6 tornilos de cabeza plana (HDD).X6 Tornillos de bronce.X1 speaker.X1 Base plastica de apoyoX1 Guía de bloqueo antirrobo con tornillo.X1 Cable Power.X1 Guía de Armado
X14 self-tapping screws (Mother ODD)X6 plain screws (HDD)X6 bronze screws.X1 speaker.X1 plastic support baseX1 Anti-theft blocking guide with screw.X1 Power cable.X1 Assembly guide.
INSTALLING A MOTHERBOARDINSTALANDO EL MOTHERBOARDF
Use the bronze screws over the plating of the chassis.
Fije los tornillos de bronce al chapón del chassis.
Mount the motherboard on its place (Use the plastic pieces only if necesary).
Monte el motherboard en su posiciòn (Utilice los tacos plásticos solo si son necesarios).
Screw the motherboard to the bronze pieces.
Atornille el motherboard a los bronces.
VCC (1,2)
USB- (3,4)
USB+ (5,6)
GND (7,8,9)
INSTALLING OPTIC DRIVES IN 5.25 BAYSINSTALANDO LAS UNIDADES OPTICAS EN BAHIAS 5.25C
Withdraw the multi-bay tray from the case and insert the optic drive in the corresponding bay.
Retire la bandeja multi-había del gabinete e inserte la unidad óptica en la bahía correspondiente.
Screw the drive to the tray until held firm.
Atornille la unidad a la bandeja hasta dejar en posición firme.
Once the drive has been placed, match its holes with the ones in the chassis structure.
Una vez ubicado, haga coincidir los orificios de la unidad óptica con los agujeros de la estructura del chassis.
1 3
2
1