clamps workholding

Clamps and Workholding

Band Clamps 182Bar Clamps 181C-Clamps 178 - 180Clamp Accessories 136 - 138Grippers and Pads 168 - 171Horizontal Handle Hold Down Clamps 118 - 121Hydraulic Power Workholding 148 - 155Manual Clamping Systems 156 - 167Pneumatic Clamp Accessories 147Pneumatic Heavy Duty Clamps 142 - 144Pneumatic Hold Down Clamps 139 - 140Pneumatic Straight Line Action Clamps 141Pneumatic Swing Cylinder Clamps 145 - 146Pull Action Latch Clamps 122 - 125Spring Clamps 180Squeeze Action Plier Clamps 134 - 135Straight Line Action Clamps 126 - 133Vertical Handle Hold Down Clamps 112 - 117Vises and Accessories 172 - 177

LIB

RA

RY

LIB

RA

RY

109

0109.qxd 2/23/2010 12:42 PM 09

110

WO RKHOLDING SOLUT IONS

If you don’t see the DE-STA-CO products youneed, let us know and we’ll get them for you.

Available from Reid Supply:

• DE-STA-CO Toggle Clamps and Accessories

• DE-STA-CO Plier Clamps

• DE-STA-CO Premium Clamps

• DE-STA-CO Pneumatic Clamps and Accessories

• Superior consultation, innovation, engineering,service and more

Today’s manufacturing challenges are tougher than ever.Regardless of your application, DE-STA-CO offersworkholding and automation solutions to meet your needs.

• DE-STA-CO products are ideal for a wide variety of industries and manufacturing processes

• Flexible workholding selection accommodates all parts, rangingfrom small and delicate to large and heavy

Reid Supply is the largest stocking distributor of DE-STA-CO in North America

0110-111.qxd 2/19/2010 12:14 PM Page 110

A WORLD OF DE-STA-COAT REID SUPPLY

800.253.0421ReidSupply.com

111

0110-111.qxd 2/19/2010 12:15 PM Page 111

REID SUPPLY 2010/2011 Order more, save more: Quantity Discounts on Back Cover!112

Cla

mp

s an

d W

ork

ho

ldin

g

AA

E

E

D

D1

F

B

H

C C

J

G

VERTICAL HANDLE HOLD-DOWN CLAMPS

See pages 136 and 137 for clamp accessories.

Series TC-2002, 2007, 2010

Now you can save valuable space in all your applications without sacrificing holding capacity or clamp performance. The open “U” barhas a knob on the end to prevent the spindle from slipping off the end of the arm. Unique design delivers greater hand clearance in theopen position, eliminating pinch points and improving safety and ergonomics. Clamp comes complete with ergonomic handle grip, twoflanged washers and spindle assembly (“U” bar models only). All “S” bar models supplied with bolt retainer.

AA

E

E

D

D1

F

B

TC-2002-UB TC-2007-UB TC-2010-UB

H

C C

J

G

TC-2002-STC-2007-STC-2010-S

TC-2002-S

TC-2002-U

TC-2002-UB

Series TC-2002R, 2007R, 2010R

Discount 30 applies.

Cat. No. A B C D D1 E F G H JBar

Opening

HoldingCapacity

Lbs.

PriceEach1-49

TC-2002-SR 4.73 4.17 .95 .90 .50 1.06 1.36 1.52 1.93 .22 85° 600 24.57TC-2002-UBR 5.07 4.17 1.27 .90 .50 .25 1.36 — 1.93 .22 85° 600 26.15TC-2002-UR 4.73 4.17 .95 .90 .50 1.06 1.36 1.52 1.93 .22 85° 600 23.58TC-2007-SR 7.21 5.94 1.25 1.25 .75 1.25 1.93 1.94 2.88 .28 76° 1000 35.05TC-2007-UBR 7.64 5.94 1.68 1.25 .75 .25 1.93 — 2.88 .28 76° 1000 35.81TC-2007-UR 7.21 5.94 1.25 1.25 .75 1.25 1.93 1.94 2.88 .28 76° 1000 34.39TC-2010-SR 9.00 7.28 1.70 1.25 — 1.78 2.53 2.62 3.56 .34 83° 1400 47.55TC-2010-UR 9.00 7.28 1.70 1.25 — 1.78 2.53 2.62 3.56 .34 83° 1400 46.51

Series TC-207-R, 210-R

These clamps lock in both clampedand unclamped positions. Boltretainer supplied with solid barmodels. Flanged washers suppliedwith U-bar models. Series 207accommodates any 5/16” spindle.Series 210 accommodates any 3/8”spindle.

Discount 30 applies. C

B

Locking Mechanism

A

TC-207-LRTC-210-UR

BarType

Base Type

HoldingCapacity Lbs.

Bar Opening

Price Each1-49Cat. No. A B C D E F

TC-207-LR 6.90 1.25 4.58 .75 1.25 .28 Solid Flanged 500 100° 30.93TC-207-UR 6.90 1.25 4.58 .75 1.28 .25 U-Bar Flanged 375 100° 31.01TC-210-SR 8.00 1.68 6.61 1.25 1.75 .33 Solid Flanged 750 103° 44.07TC-210-UR 8.00 1.68 6.61 1.25 1.75 .33 U-Bar Flanged 600 103° 43.42

Designed with maximum safety and ergonomic benefits as itsfoundation, these toggle-lock plus clamps offer many outstandingfeatures, including:

• Bushings at major pivot points for longer life• Stop point locations at the base for added durability• Greater hand clearance for ease of use• Elimination of pinch points for added safety• Extended handle length for improved ergonomics• Longer clamping arm for greater flexibility• Spindle contacts workpiece in vertical position for less

workpiece marring or movement• Clamping arm completely clears workpiece for easy load/unload

Toggle-Lock Plus clamps have a locking release lever for improved safety. Used in applications where there is severe stress or vibrationon the clamps, or for over-head installations.

Toggle-Lock Plus


Cat. No. A B C D D1 E F G H JHandleMoves

BarOpens

HoldingCapacity

Lbs.

PriceEach1-49

TC-2002-S 4.73 3.29 .95 .90 .50 1.06 1.36 1.52 1.93 .22 85 71 600 15.39TC-2002-U 4.73 3.29 .95 .90 .50 1.06 1.36 1.52 1.93 .22 85 71 600 14.68TC-2002-UB 5.07 3.29 1.27 .90 .50 .25 1.36 — 1.93 .22 85 71 600 16.32TC-2007-S 7.21 4.81 1.25 1.25 .75 1.25 1.93 1.94 2.88 .28 76 65 1000 19.49TC-2007-U 7.21 4.81 1.25 1.25 .75 1.25 1.93 1.94 2.88 .28 76 65 1000 18.89TC-2007-UB 7.64 4.81 1.68 1.25 .75 .25 1.93 — 2.88 .28 76 65 1000 20.31TC-2010-S 9.00 6.09 1.70 1.25 — 1.78 2.53 2.62 3.56 .34 83 69 1400 29.22TC-2010-U 9.00 6.09 1.70 1.25 — 1.78 2.53 2.62 3.56 .34 83 69 1400 28.21TC-2010-UB 9.612 6.09 2.20 1.25 — .316 2.53 — 3.56 .34 83 69 1400 30.11

0112.qxd 2/17/2010 2:57 PM Page 112

http://www.reidsupply.com/Detail.aspx?itm=TC-2002-UBR

http://www.reidsupply.com/Detail.aspx?itm=TC-2007-UBR

http://www.reidsupply.com/Detail.aspx?itm=TC-2002-SR

http://www.reidsupply.com/Detail.aspx?itm=TC-2002-UR





http://www.reidsupply.com/Detail.aspx?itm=TC-2002-UB



http://www.reidsupply.com/Detail.aspx?itm=TC-207-LR




http://www.reidsupply.com/Detail.aspx?itm=TC-2002-S

http://www.reidsupply.com/Detail.aspx?itm=TC-2002-U





Call 800.253.0421 Click ReidSupply.com REID SUPPLY 2010/2011 113

Clam

ps an

d W

orkh

old

ing



Series TC-201Holding Capacity: 100 Lbs.Handle Moves: 60°, Bar Moves: 110°

Steel models furnished with neoprene tipped M4 spindle(TC-201208-M), flanged washers and lock nuts. Stainlessmodels furnished with stainless steel hex head spindle(TC-201943), without neoprene tip.

Note: Also available as power Model TC-812. See page 139.


TC-201-UB

TC-201-TU

TC-201-U

Cat. No. A B C D EHandleType

BarType

BaseType

Price Each1-49

SteelTC-201-U 3.03 .63 2.02 .63 .94 Vertical U-Bar Flange 10.77TC-201-TU 2.25 .63 2.02 .63 .94 Tee U-bar Flange 14.17TC-201-UB 3.13 .88 2.02 .63 .16 Vertical U-Bar Straight 12.49Stainless SteelTC-201-USS 3.03 .63 2.02 .63 .94 Vertical U-Bar Flange 21.28


Steel furnished with M6 spindle (TC-202208-M) and lock nuts.U-bar models also include flanged washers.



TC-202-UB

TC-202-T

TC-202


BarType

BaseType

Price Each1-49

SteelTC-202 4.21 .94 2.31 .50 1.06 Vertical Fixed Flange 11.30TC-202-T 2.81 .94 2.31 .50 1.06 Tee Fixed Flange 15.42TC-202-TU 2.81 .94 2.69 .50 1.06 Tee U-Bar Flange 15.42TC-202-B 4.40 1.13 2.31 .50 .25 Vertical Fixed Straight 13.57TC-202-U 4.21 .94 2.73 .50 1.06 Vertical U-Bar Flange 11.30TC-202-UL 4.21 .94 3.27 .50 1.06 Vertical U-Bar Flange 13.09TC-202-UB 4.40 1.13 2.73 .50 .25 Vertical U-Bar Straight 13.57Stainless SteelTC-202-SS 4.21 .94 2.31 .50 1.06 Vertical Fixed Flange 26.79TC-202-USS 4.21 .94 2.73 .50 1.06 Vertical U-Bar Flange 26.79TC-202-UBSS 4.40 1.13 2.73 .50 .25 Vertical U-Bar Straight 32.81

Series TC-207Holding Capacity: -L and -S Models = 500 Lbs.U Model = 375 Lbs.Handle Moves: 62°, Bar Moves: 115°

Bolt retainers are furnished with solid bar models. Two flangedwashers are furnished with U-bar models. Accommodates any5/16" spindle.

Note: Also available as power Model TC-807-L, see page 139, and asToggle-Lock Plus Model TC-207-LR and TC-207-UR, see page 112.

*Supplied with spindle TC-225208-M


A A

BB

E

C

D

TC-207-L

TC-207-TS

TC-207-UO


BarType

Base Type

Price Each1-49

SteelTC-207-L 6.89 1.25 5.02 .75 1.25 Vertical Solid Flange 16.76TC-207-LB 7.48 1.55 5.02 .75 .25 Vertical Solid Straight 17.63TC-207-S 6.89 1.25 3.75 .75 1.25 Vertical Solid Flange 14.75TC-207-SB 7.48 1.55 3.75 .75 .25 Vertical Solid Straight 17.03TC-207-TS 4.36 1.25 3.75 .75 1.25 Tee Solid Flange 19.35TC-207-U* 6.89 1.25 3.68 .75 1.25 Vertical U-Bar Flange 14.75TC-207-UB* 7.48 1.55 3.68 .75 .25 Vertical U-Bar Straight 17.03TC-207-TU 4.36 1.25 3.75 .75 1.25 Tee U-Bar Flange 19.02TC-207-UL* 6.89 1.25 5.41 .75 1.25 Vertical U-Bar Flange 15.01TC-207-ULB* 7.48 1.55 5.41 .75 .25 Vertical U-Bar Straight 17.36TC-207-TUL 4.36 1.25 5.41 .75 1.25 Tee U-Bar Flange 19.02Stainless SteelTC-207-USS 5.63 1.25 4.38 .75 1.25 Vertical U-Bar Flange 34.51

Series TC-210Holding Capacity: 750 Lbs. (max. for solid bar models)Holding Capacity: 600 Lbs. (max. for U-bar models)Handle Moves: 66°, Bar Moves: 122°

Two flanged washers (TC-235106) furnished with U-bar modelsand bolt retainer (TC-210114) supplied with solid bar models.Accommodates any 3/8” spindle.

Note: Also available as power Model TC-810-U, see page 139, and asToggle-Lock Plus Model TC-210-SR and TC-210-UR, see page 112.

*Supplied with spindle TC-240208-M


TC-210-SB

TC-210-U


BarType

BaseType

Price Each1-49

SteelTC-210-U* 8.00 1.67 5.53 1.25 1.78 Vertical U-Bar Flange 21.54TC-210-UB* 8.16 2.19 5.53 1.25 .31 Vertical U-Bar Straight 27.31TC-210-S 8.00 1.67 5.53 1.25 1.78 Vertical Solid Flange 24.06TC-210-SB 8.16 2.19 5.35 1.25 .31 Vertical Solid Straight 27.98TC-210-TU 5.38 1.69 5.35 1.25 1.78 Tee U-bar Flange 29.82Stainless SteelTC-210-USS 7.66 1.69 5.35 1.25 1.78 Vertical U-bar Flange 47.90

0113.qxd 2/17/2010 2:57 PM Page 113

http://www.reidsupply.com/Detail.aspx?itm=TC-202-UBSS

http://www.reidsupply.com/Detail.aspx?itm=TC-201-USS


http://www.reidsupply.com/Detail.aspx?itm=TC-207-ULB

http://www.reidsupply.com/Detail.aspx?itm=TC-207-TUL



http://www.reidsupply.com/Detail.aspx?itm=TC-201-TU



http://www.reidsupply.com/Detail.aspx?itm=TC-202-UL


http://www.reidsupply.com/Detail.aspx?itm=TC-202-SS

http://www.reidsupply.com/Detail.aspx?itm=TC-207-LB

http://www.reidsupply.com/Detail.aspx?itm=TC-207-SB

http://www.reidsupply.com/Detail.aspx?itm=TC-207-TS








http://www.reidsupply.com/Detail.aspx?itm=TC-202-T

http://www.reidsupply.com/Detail.aspx?itm=TC-202-B


http://www.reidsupply.com/Detail.aspx?itm=TC-207-L





http://www.reidsupply.com/Detail.aspx?itm=TC-202


Cla

mp

s an

d W

ork

ho

ldin

gVERTICAL HANDLE HOLD-DOWN CLAMPS


TC-229Handle Moves: 180°, Bar Moves: 115°

Featuring a unique cam action, these clamps will hold workpiecesof inconsistent height. Ideal for castings or forgings. Once set fornominal or average piece height, it will allow for a 5/32” deviationlarger or smaller than average. Overall clamping range is 5/16”.Furnished with 1/2” spindle assembly (TC-220203).


Series TC-247Holding Capacity: 1,000 Lbs.Handle Moves: 75°, Bar Moves: 136°

Bolt retainer furnished with solid bar models. Flanged washersfurnished with U-bar models. Accommodates any 1/2” spindle.



TC-247-U

TC-247-S


BarType

BaseType

PriceEach1-49

TC-247-U 8.69 2 6.87 1.25 1.78 Vertical U-Bar Flange 31.56TC-247-S 8.69 2 6.87 1.25 1.78 Vertical Solid Flange 36.61

Series TC-267Holding Capacity: 1,200 Lbs.Handle Moves: 70°, Bar Moves: 140°

Bolt retainer furnished with solid bar models. Flanged washersfurnished with U-Bar models. Accommodates any 5/8” spindle.


TC-267-S

TC-267-U


Bar Type

Base Type

Price Each1-49

TC-267-S 11.88 3.08 8.88 2 2.75 Vertical Solid Flange 50.94TC-267-U 11.88 3.08 8.92 2 2.75 Vertical U-Bar Flange 49.97

TC-91090Holding Capacity: 385 LbsHandle Moves: 60°, Bar Moves: 100°

TC-91140 Holding Capacity: 1,000 Lbs.Handle Moves: 65°, Bar Moves: 100°

Front flange mount for mounting flexibility on vertical surfaces.Stainless steel rivets for increased strength. Guide bars allowfor more clamp stability. Supplied with two flanged washers.TC-91090 accommodates any 5/16” or M8 spindle. TC-91140accommodates any 3/8” or M10 spindle. Spindles not included.


TC-91090

Cat. No. A B C D E F G H J K LPrice Each

1-49TC-91090 7.68 4.72 2.68 .80 1.29 1.32 2.09 2.99 .28 2.40 .33 18.14TC-91140 11.06 7.87 5.24 1.26 1.81 2.17 2.74 5.24 .33 4.41 .43 27.25

HoldingCapacity

(Lbs.)

PriceEach1-49Cat. No. A B C D E F G H I J K

TC-229 9.94 7.13 2.06 .88 2.0 1.88 2.75 5.25 1/2-13 .33 2.75 1,000 61.79

0114.qxd 2/17/2010 2:57 PM Page 114









Clam

ps an

d W

orkh

old

ing




Compact clamps with great holding capacity. Made from C-1008or C-1010 low carbon, cold rolled steel with a black oxide finish.Hardened and ground pivots can be replaced. Forged clamps canbe cut or welded to suit fixturing or tooling needs.


G

AA

C C

E

HH F

B

F

D J

516-B

516 516

516-B

TC-516 TC-516-B

Cat. No. A B C D E F G HBaseType

Price Each1-49

TC-516 6.31 4.00 1.25 — — 1.63 .53 2.38 Straight 81.92TC-516-B 6.72 4.38 1.50 1.00 1.50 2.00 2.00 2.19 Flange 92.63

TC-518Holding Capacity: 500 Lbs.Handle Moves: 75°, Bar Moves: 90°

Features a forged hold-down bar and ergonomic plastic grip.Forged hold-down bar can be cut or welded to suit the fixture.Offers twice the normal clearance under the bar as other clampsthis size.


Cat. No. A B C D E F G H JPrice Each

1-49TC-518 6.88 4.28 2.5 1.00 .88 1.50 1.38 2.63 .29 27.69

TC-548, 578Handle Moves: 129°, Bar Moves: 199°

Largest capacity clamps. The “bar-guide” feature provides extrasupport and improves rigidity and repeatability.


Cat. No. A B CHoldingCapacity

HandleType

BarType

BaseType

Price Each1-49

TC-548 9.44 2.25 7.50 2,500 Vertical Solid Straight 90.63TC-578 11.00 2.75 8.63 4,000 Vertical Solid Straight 140.87

Cam Action Clamps

Automatically compensates for variations in part thickness. A high to low limit clamping range allows for normal part size variation andeliminates adjustments. Normalized cast steel construction for heavy duty use. Fast, one hand operation. Cam action resists vibrationloosening. Accommodates from 1/8” to 1/2” part size variation.

M D

N

N

J

A

EH

C

FBG

LK

Maximum HoldingCapacity Lbs.

PriceEachCat. No. A B C D E F G H J K L M N

TC-7-101 5.00 3.13 1.44 .50 1.75 1.25 .75 1.25 .25 .25 .22 .50 .13 475 84.52TC-7-58 7.00 2.55 1.88 .56 2.25 1.69 1.00 1.62 .31 .34 .28 .50 .13 600 143.02TC-7-59 8.50 3.50 2.19 .63 2.50 2.06 1.38 1.88 .31 .39 .34 .63 .19 1,000 172.13TC-7-60 9.50 4.38 2.50 .88 2.88 2.44 1.62 2.12 .38 .44 .41 .75 .25 1,600 210.64TC-7-61 13.93 5.93 2.88 1.25 4.50 3.00 2.00 3.50 .51 .50 .53 1.13 .38 3,750 346.37

0115.qxd 2/22/2010 10:12 AM Page 115


http://www.reidsupply.com/Detail.aspx?itm=TC-7-101










Cla

mp

s an

d W

ork

ho

ldin

gECONOMY VERTICAL HANDLE HOLD-DOWN CLAMPS

All models have a blue vinyl grip handle. Supplied with spindle assembly.

A

A

C C

H B

L

E

A A

D

E

F

G

K

Ø J

ETC-11020

ETC-11021ETC-11022

ETC-11025ETC-11026

Cat. No. A B C D E F G H J K LBar

TypeBaseType

HandleType

HoldingCap. Lbs.

SpindleSize

HandleMoves

BarMoves

PriceEach

ETC-11011 3.38 2.07 0.73 0.63 0.95 1.00 1.32 1.06 0.17 0.77 — U-Bar Flanged Standard 100 #10-24 X 1.38 Bonded 56° 100° 7.36ETC-11012 3.65 2.04 1.00 0.63 0.14 1.00 — 1.03 0.17 0.82 — U-Bar Straight Standard 100 #10-24 X 1.38 Bonded 56° 100° 8.23ETC-11013 2.41 2.07 0.68 0.63 0.94 1.00 1.32 1.06 0.17 0.81 1.77 U-Bar Flanged T Handle 100 #10-24 X 1.38 Bonded 56° 100° 9.15ETC-11020 4.01 2.50 0.98 0.51 1.00 0.98 1.50 1.28 0.21 — — Solid Flanged Standard 200 1/4-20 X 1.75 Bonded 60° 100° 7.95ETC-11021 4.01 2.68 0.95 0.52 1.03 0.98 1.50 1.68 0.20 1.08 — U-Bar Flanged Standard 200 1/4-20 X 1.75 Bonded 60° 100° 7.95ETC-11022 4.27 2.68 1.18 0.51 0.26 0.98 — 1.68 0.21 1.08 — U-Bar Straight Standard 200 1/4-20 X 1.75 Bonded 60° 100° 9.06ETC-11023 3.12 2.68 0.98 0.51 1.03 0.98 1.53 1.70 0.21 0.98 2.60 U-Bar Flanged T Handle 200 1/4-20 X 1.75 Bonded 60° 100° 9.90ETC-11025 4.23 2.48 1.15 0.72 0.24 0.98 — 1.24 0.21 — — Solid Straight Standard 200 1/4-20 X 1.75 Bonded 60° 100° 9.06ETC-11026 3.03 2.50 0.97 0.56 0.99 0.98 1.48 1.26 0.21 — 2.60 Solid Flanged T Handle 200 1/4-20 X 1.75 Bonded 60° 100° 9.90


A

A

C C

H B

L

E

A A

D

E

F

G

K

Ø J

ETC-11071

ETC-11072ETC-11073

ETC-11074


TypeBaseType

HandleType

HoldingCap. Lbs.

SpindleSize

HandleMoves

BarMoves

PriceEach

ETC-11018 5.60 5.43 1.25 0.78 1.25 1.38 1.77 3.75 0.27 2.79 — Long U-Bar Flanged Standard 500 5/16-18 X 2.50 Bonded 60° 100° 10.61ETC-11019 5.90 5.50 1.62 0.75 0.25 1.38 — 2.85 0.27 2.85 — Long U-Bar Straight Standard 375 5/16-18 X 2.50 Bonded 60° 100° 11.41ETC-11071 5.88 4.59 1.23 0.75 1.25 1.38 1.82 2.85 0.27 2.05 — U-Bar Flanged Standard 200 5/16-18 X 2.50 Bonded 60° 100° 10.42ETC-11072 5.93 4.61 1.57 0.75 0.25 1.38 — 2.85 0.27 2.03 — U-Bar Straight Standard 375 5/16-18 X 2.50 Bonded 60° 100° 11.41ETC-11073 4.10 4.60 1.23 0.75 1.25 1.38 1.77 2.86 0.27 2.10 3.86 U-Bar Flanged T Handle 375 5/16-18 X 2.50 Bonded 60° 100° 12.29ETC-11074 5.90 3.75 1.26 0.75 1.25 1.38 1.80 2.24 0.27 — — Solid Bar Flanged Standard 375 5/16-18 X 2.50 Bonded 60° 100° 10.42ETC-11077 6.12 3.75 1.57 0.75 0.25 1.38 — 2.24 0.27 — — Solid Straight Standard 375 5/16-18 X 2.50 Bonded 60° 100° 11.41ETC-11078 5.58 4.78 1.26 0.75 1.25 1.38 1.76 3.40 0.27 — — Long Solid Flanged Standard 500 5/16-18 X 2.50 Bonded 60° 100° 11.77ETC-11079 6.12 4.85 1.57 0.75 0.25 1.38 — 3.47 0.27 — — Long Solid Straight Standard 500 5/16-18 X 2.50 Bonded 60° 100° 11.77

Verticle Handle Hold-Down Clamps


A

A

C C

H B

L

E

A A

D

E

F

G

K

Ø J


TypeBaseType

HandleType

HoldingCap. Lbs.

SpindleSize

HandleMoves

BarMoves

PriceEach

ETC-11101 7.96 5.65 1.66 1.25 1.80 1.94 2.55 3.56 0.31 2.31 — U-Bar Flanged Standard 600 3/8-16 X 3.50 Bonded 58° 105° 15.19ETC-11102 8.46 5.65 2.18 1.25 0.31 1.94 -— 3.56 0.31 2.23 — U-Bar Straight Standard 600 3/8-16 X 3.50 Bonded 58° 105° 17.01ETC-11103 5.60 5.50 1.62 1.25 1.77 1.94 2.50 3.56 0.31 2.40 5.13 U-Bar Flanged T Handle 600 3/8-16 X 3.50 Bonded 58° 105° 18.24ETC-11104 7.89 5.59 1.26 1.25 1.81 1.94 2.56 3.53 0.31 — — Solid Flanged Standard 750 3/8-16 X 3.50 Bonded 58° 105° 16.10ETC-11107 8.46 5.59 2.16 1.25 0.35 1.94 — 3.59 0.31 — — Solid Straight Standard 750 3/8-16 X 3.50 Bonded 58° 105° 17.45



0116.qxd 2/22/2010 10:17 AM Page 116

http://www.reidsupply.com/Detail.aspx?itm=ETC-11011
























Clam

ps an

d W

orkh

old

ing

ECONOMY VERTICAL HANDLE HOLD-DOWN CLAMPS

Vertical Handle Hold-Down Action Clamps


E

B

K

FD ØJ

E G

C

A

H

Cat. No. A B C D E F G H J KBar

TypeBaseType

HandleType

HoldingCap. Lbs.

SpindleSize

HandleMoves

BarMoves

PriceEach

ETC-11471 8.81 6.89 1.95 1.25 1.77 2.00 2.56 4.87 0.35 2.98 U-Bar Flanged Standard 1000 1/2-13 X 3.00 Plain 70° 135° 22.26ETC-11472 9.17 6.89 2.31 1.25 0.31 2.00 — 4.90 0.35 3.00 U-Bar Straight Standard 1000 1/2-13 X 3.00 Plain 70° 135° 29.26ETC-11474 8.81 7.12 2.00 1.25 1.79 2.00 2.56 4.95 0.35 — Solid Flanged Standard 1000 1/2-13 X 3.00 Plain 70° 135° 24.13ETC-11477 9.17 7.12 2.72 1.25 0.39 2.00 — 4.95 0.35 — Solid Straight Standard 1000 1/2-13 X 3.00 Plain 70° 135° 32.00



DD

F

E G

K

H

C

BE

A

ØJ


TypeBaseType

HandleType

HoldingCap. Lbs.

SpindleSize

HandleMoves

BarMoves

PriceEach

ETC-11671 11.87 9.00 3.08 2.00 2.75 2.99 3.75 5.99 0.48 4.33 U-Bar Flanged Standard 1200 1/2-13 X 4.50 Plain 60° 140° 33.47ETC-11674 11.83 8.97 3.22 2.00 2.75 2.99 3.75 5.99 0.48 — Solid Flanged Standard 1200 1/2-13 X 4.50 Plain 60° 140° 33.47



C

A

H

K

F

D

E G

C

B

ØJ


TypeBaseType

HandleType

HoldingCap. Lbs.

SpindleSize

HandleMoves

BarMoves

PriceEach

ETC-11351 6.85 4.22 1.20 1.26 1.44 1.97 2.20 2.25 0.33 1.53 LowU-Bar Flanged Standard 850 3/8-16 X 3.50 Bonded 85° 90° 13.56ETC-11352 6.85 4.22 2.26 1.26 1.44 1.97 2.20 2.25 0.33 1.53 High U-Bar Flanged Standard 850 3/8-16 X 3.50 Bonded 85° 90° 13.56

0117.qxd 2/17/2010 2:59 PM Page 117










Cla

mp

s an

d W

ork

ho

ldin

gHORIZONTAL HANDLE HOLD-DOWN CLAMPS

TC-2013-U, 2017-U, 2027-U, 2037-UFlanged Base

A

ML

CH

L1

Cat No.Holding

Cap. Lbs.Bar

Opening A C H L L1 M Price EachTC-2013-U 295 71° .53 .75 1.27 5.88 1.65 10-32 13.37TC-2017-U 560 73° 1.03 .98 1.95 8.62 2.53 1/4-20 17.25TC-2027-U 840 68° 1.03 1.32 2.20 9.88 2.86 5/16-18 19.11TC-2037-U 1680 73° 1.63 1.62 2.75 13.35 4.40 3/8-16 32.22

MOpening

H

AL1

L

B

C

Cat No.Holding

Cap. Lbs.Bar

Opening A B C H L L1 M Price EachTC-2013-UR 295 70° .53 .70 .75 1.27 5.88 1.65 10-32 21.40TC-2017-UR 560 73° 1.03 1.21 .98 1.95 8.62 2.53 1/4-20 27.62TC-2027-UR 840 70° 1.03 1.21 1.32 2.20 9.88 2.86 5/16-18 30.52TC-2037-UR 1680 70° 1.63 1.69 1.62 2.75 13.35 4.40 3/8-16 52.95

Series TC-2005

Cat No.Holding

Cap. Lbs. A4 B C H L L1 M Price EachTC-2005-U 180 .09 .62 .31 .73 3.14 .85 M4 10.39TC-2005-S 100 .09 .62 .38 .73 3.12 .83 M4 10.39

• Robust design offers increased holding capacity over TC-213-U,217-U, 227-U, 237-U

• Low arm deflection under load (greater stiffness)• Mounting hole interchangeable with TC-213-U, 217-U, 227-U,

237-U• Large handle clearance reduces pinch points• Fixed handle pivot provides smooth action

• Robust design offers increased holding capacity over TC-205-Uand TC-205-S

• Mounting hole interchangeable with TC-205-U and TC-205-S• Large handle clearance reduces pinch points• Fixed handle pivot provides smooth action• Requires only two mounting screws

H

62°Opening

M

C

L1

B

A4L

TC-2013-UR, 2017-UR, 2027-UR, 2037-URFlanged BaseToggle Lock Plus®

• Additional locking lever lockshandle in closed and openpositions

• Robust design offers increasedholding capacity over TC-213-U,217-U, 227-U, 237-U

• Low arm deflection under load(greater stiffness)

• Mounting hole interchangeablewith TC-213-U, 217-U, 227-U,237-U

• Large handle clearance reducespinch points

• Fixed handle pivot providessmooth action


The smallest of the horizontalhandle, horizontal bar clamps.Steel models supplied with M4neoprene tipped spindleassembly (TC-205208-M).Stainless steel modelssupplied with stainless steelhex head spindle (TC-205943).


TC-205-S

TC-205-UR

TC-205-SB

TC-205-SL

TC-205-SR

TC-205-UB

Cat. No. A B C D EBar

TypeBase Type

Price Each1-49

SteelTC-205-S .67 .37 2.78 .53 .63 Solid Flange 8.33TC-205-SB .84 .63 2.78 .53 — Solid Straight 10.09TC-205-SL .67 .37 2.78 .53 — Solid Left Flange 10.72TC-205-SR .67 .37 2.78 .53 — Solid Right Flange 10.72TC-205-U .67 .31 2.65 .53 .63 U-Bar Flange 8.33TC-205-UB .84 .53 2.65 .53 — U-Bar Straight 10.30TC-205-UL .67 .31 2.65 .53 — U-Bar Left Flange 10.72TC-205-UR .67 .31 2.65 .53 — U-Bar Right Flange 10.72Stainless SteelTC-205-SSS* .67 .37 2.75 .53 .63 Solid Flange 16.15TC-205-USS* .67 .31 2.66 .53 .63 U-Bar Flange 15.82*Handle does not have vinyl grip.

TC-205-U

0118.qxd 3/5/2010 2:59 PM Page 118





http://www.reidsupply.com/Detail.aspx?itm=TC-205-SSS









http://www.reidsupply.com/Detail.aspx?itm=TC-205-SL








Clam

ps an

d W

orkh

old

ingHORIZONTAL HANDLE HOLD-DOWN CLAMPS


Series TC-206-SSHolding Capacity: 100 Lbs.Handle Moves: 90°, Bar Moves: 90°

Made of stainless steel. Offers good clearance height under thebar, while maintaining a low profile. Optional high bar provideseven more space to clamp for thicker material. Furnished withflanged washers (TC-105906) and stainless steel spindle assem-bly (TC-205943), two 8-32 lock nuts and one 8-32 x 3/4” bolt.


TC-206-SS

TC-206-HSS


All steel models furnished with M6 bonded neoprene spindle(TC-202208-M), lock nuts and flanged washers or bolt retainer.Stainless steel models supplied with stainless steel hex headspindle (TC-202943), without neoprene tip.


TC-215-U


Steel models furnished with M8 bonded neoprene tippedspindle (TC-225208-M), flanged washers and lock nuts.Stainless steel models supplied with stainless steel hex headspindle (TC-207943), without neoprene tip.Discount 30 applies.

TC-225-U

TC-225-UB

BarType

BaseType

Price Each1-49Cat. No. A B C D E

SteelTC-225-U 1.84 1.32 6.70 1 .88 U-Bar Flange 12.82TC-225-UB 2.13 1.63 6.70 1 — U-Bar Straight 16.41Stainless SteelTC-225-USS* 1.84 1.32 6.70 1 .88 U-Bar Flange 30.98*Handle does not have plastic grip

TC-225-URToggle-Lock PlusHolding Capacity: 500 Lbs.Handle Moves: 70°, Bar Moves: 90°

TC-235-URToggle-Lock PlusHolding Capacity: 750 Lbs.Handle Moves: 55°, Bar Moves: 90°

Equipped with a release lever which locks in clamped position only. Large handle pad for greater comfort. TC-225-UR supplied with anM8 neoprene tipped spindle assembly (TC-225208-M) and two washers (TC-507107). TC-235-UR furnished with M10 bondedneoprene tipped spindle (TC-240208-M), flanged washers and lock nuts.Discount 30 applies.

LOCKINGMECHANISM

C

BA

D

EF

TC-225-UR TC-235-UR


Steel models furnished with M10 bonded neoprene tippedspindle (TC-240208-M), flanged washers and lock nuts.Stainless steel models supplied with stainless steel hex headspindle (TC-237943), without neoprene tip.


TC-235-U

TC-235-UB

BarType

BaseType


SteelTC-235-U 2.55 1.75 10.87 1.63 1.63 U-Bar Flanged 21.69TC-235-UB 2.91 2.16 10.87 1.63 .31 U-Bar Straight 24.99Stainless SteelTC-235-USS 2.55 1.75 10.87 1.63 1.63 U-Bar Flanged 52.98


TypeBaseType

Price Each1-49

SteelTC-215-S 1.53 1.03 5.50 1 .88 Solid Flange 14.18TC-215-U 1.53 1.03 5.50 1 .88 U-Bar Flange 11.23TC-215-UB 1.78 1.28 5.50 1 .19 U-Bar Straight 13.41Stainless SteelTC-215-USS* 1.53 1.03 5.50 1 .88 U-Bar Flange 22.38*Handle does not have plastic grip


TypeBaseType

Price Each1-49

Stainless SteelTC-206-SS 1.06 .40 2.75 .53 .63 Low U-Bar Flanged 23.65TC-206-HSS 1.06 .75 2.75 .53 .63 High U-Bar Flanged 23.65

Bar Type

BaseType


TC-225-UR 1.92 1.32 7.14 1.00 .88 .27 U-Bar Flanged 29.31TC-235-UR 2.50 1.75 10.50 1.63 1.63 .33 U-Bar Flanged 48.13

0119.qxd 2/23/2010 12:43 PM 9




http://www.reidsupply.com/Detail.aspx?itm=TC-206-HSS












Cla

mp

s an

d W

ork

ho

ldin

gHORIZONTAL HANDLE HOLD-DOWN CLAMPS


Series TC-305, 307, 309

Small compact clamps provide considerable holding capacityin a small size. T-handle can be operated from either side orfrom behind. All have U-Bar and flanged base. TC-305-USSand TC-307-USS handle moves 175°, bar 92°. TC-309-USShandles moves 160°, bar moves 88°. Supplied with fullythreaded, stainless steel, hex head spindle, without neoprenetip, except TC-309-USS, which comes with press on neoprenecap. See page 136 for accessories.


TC-305-USS

HoldingCapacity


SteelTC-305-U 1.38 .50 2.22 .53 .63 M5 150 10.50TC-307-U 2.40 .87 3.60 0.91 1.16 M8 350 15.77TC-309-U 3.55 1.30 5.18 1.38 1.5 M10 750 26.14Stainless SteelTC-305-USS 1.38 .50 2.22 .53 .63 10-32 150 20.84TC-307-USS 2.40 .87 3.60 .91 1.16 5/16-18 350 33.72TC-309-USS 3.55 1.30 5.18 1.38 1.50 3/8-16 750 50.29

These clamps feature a compact locking release lever, which locks in the clamped position only. Provided with red vinyl handle grip andflanged washers. TC-305-UR and TC-307-UR are supplied with neoprene-tipped spindle assemblies. TC-309-UR is provided with a hex-head spindle assembly and slip-on neoprene cap TC-235119.


TC-309-UR

Cat. No.HoldingCapacity

HandleMoves°

BarOpening°

FlangedWasher

SpindleAssembly A B C D E F G H J K

Price Each1-49

TC-305-UR 150 Lbs. 175 92 TC-102111 TC-305208-M 1.44 2.25 .50 .53 .63 1.03 1.00 1.22 .17 .50 21.47TC-307-UR 350 Lbs. 175 92 TC-507107 TC-307208-M 2.44 3.61 .88 .91 1.16 1.72 1.81 1.89 28 .75 29.21TC-309-UR 750 Lbs. 160 92 TC-235106 TC-309208 3.59 5.19 1.31 1.38 1.50 2.52 2.47 2.66 33 1.06 43.15

Series TC-213, 217, 227, 237, 245

Safety designed to give more hand clearance between the barand handle when clamps are in full, open position. Bar guidefeature gives extra lateral support and rigidity to hold-down bar atfront of base. Steel series 213, 217, 227, 237 are supplied withneoprene tipped spindle assemblies and flanged washers. Series245 and all stainless steel clamps are supplied with a hex headspindle assembly. U-bar type.


TC-213-U

Cat. No. A B C D E FHandleMoves°

BarMoves°

BaseType

HoldingCapacity

PriceEach1-49

SteelTC-213-U 1.39 .72 4.12 .53 .70 M5 60 90 Flange 150 10.82TC-217-U 1.95 .97 6.56 1.03 1.12 M6 76 92 Flange 200 14.00TC-227-U 2.43 1.30 7.56 1.03 1.22 M8 62 92 Flange 500 15.44TC-237-U 3.20 1.62 10.67 1.63 1.69 M10 63 92 Flange 750 26.01TC-245-U 4.25 2.25 12.33 1.63 1.63 1/2-13 67 105 Flange 1,000 41.26Stainless SteelTC-213-USS 1.36 .75 3.94 .53 .69 10-32 60 90 Flange 150 21.83TC-217-USS 1.97 .97 6.30 1.03 1.15 1/4-20 76 92 Flange 250 26.40TC-227-USS 2.39 1.31 7.24 1.03 1.23 5/16-18 62 92 Flange 600 34.95


U-Bar model furnished with M8 bonded neoprene tipped spindle,flanged washers and lock nuts.


AB

C

E

D 329 Dia.

TC-317-S


TypePrice Each

1-49TC-317-S 5.62 2.67 6.44 0.63 1 Solid 21.67TC-317-U 5.62 2.67 6.07 0.63 1 U-Bar 22.76

Series TC-527, 528Holding Capacity: 1,000 Lbs.Handle Moves: 65°, Bar Moves: 195°

For tough, heavy-duty workholding. Clamp has square, colddrawn steel hold down bar. Pivot points have serrated, hardenedbushings.


TC-527-F

TC-527

Cat. No.BaseType

HandleType

Price Each1-49

TC-527 Flanged Pull Down 65.13TC-527-F Front Mount / Straight Pull Down 65.13TC-528 Flanged Vertical 65.13TC-528-F Front Mount / Straight Vertical 65.13

TC-305-UR, 307-UR, 309-URToggle-Lock Plus

TC-317-U

0120.qxd 2/17/2010 3:01 PM 0

http://www.reidsupply.com/Detail.aspx?itm=TC-305208-M
























http://www.reidsupply.com/Detail.aspx?itm=TC-527-F

http://www.reidsupply.com/Detail.aspx?itm=TC-528-F




Clam

ps an

d W

orkh

old

ing

ECONOMY HORIZONTAL HOLD-DOWN CLAMPSHorizontal HandleHold-Down Clamps

All models have a blue handle grip. Supplied with spindle assembly.

E

A A

H

C CCC

B

K

ØJ

DF

E G


TypeBaseType

HandleType

HoldingCap. Lbs.

SpindleSize

HandleMoves

BarMoves

PriceEach

ETC-16351 3.15 9.00 1.20 1.27 1.47 1.97 2.20 2.25 0.33 1.53 Low U-Bar Flanged Standard 850 3/8-16 X 3.50 Bonded 90° 90° 13.55ETC-16352 3.15 9.00 2.26 1.27 1.47 1.97 2.20 2.25 0.33 1.53 High U-Bar Flanged Standard 850 3/8-16 X 3.50 Bonded 90° 90° 13.56ETC-16353 4.00 9.00 2.03 1.27 — 1.97 — 2.25 0.33 1.53 Low U-Bar Straight Standard 850 3/8-16 X 3.50 Bonded 90° 90° 13.78ETC-16354 4.00 9.00 3.15 1.27 — 1.97 — 2.25 0.33 1.53 High U-Bar Straight Standard 850 3/8-16 X 3.50 Bonded 90° 90° 13.78

Horizontal HandleHold-Down Clamps


A

C

H B

F D ØJ

E G L

K


TypeBaseType

HandleType

HoldingCap. Lbs.

SpindleSize

HandleMoves

BarMoves

PriceEach

ETC-16051 1.47 2.30 0.65 0.53 0.66 1.03 1.03 1.26 0.17 0.44 1.32 U-Bar Flanged T-Handle 150 #10-24 X 1.38 Bonded 170° 90° 7.40ETC-16071 2.49 3.68 0.89 0.91 1.17 1.72 1.82 1.93 0.28 0.77 2.01 U-Bar Flanged T-Handle 350 5/16-18 X 2.50 Bonded 170° 90° 10.90ETC-16091 3.73 5.33 1.31 1.38 1.50 2.52 2.52 2.81 0.31 1.32 2.48 U-Bar Flanged T-Handle 750 3/8-16 X 3.50 Bonded 170° 90° 16.27

Horizontal HandleHold-Down Clamps


C C

H B E

A A

K

D

F

Ø J

E G

ETC-14051

ETC-14052

ETC-14054

ETC-14057

ETC-14151

ETC-14152


TypeBaseType

HandleType

HoldingCap. Lbs.

SpindleSize

HandleMoves

BarMoves

PriceEach

ETC-14051 0.70 3.10 0.34 0.42 0.65 0.95 0.98 0.78 0.17 0.48 U-Bar Flanged Standard 60 #8-32 X .75 Nylon 80° 90° 5.84ETC-14052 0.83 3.11 0.47 0.40 0.11 0.95 — 0.78 0.17 0.48 U-Bar Straight Standard 60 #8-32 X .75 Nylon 80° 90° 6.52ETC-14054 0.73 3.24 0.42 0.41 0.64 0.95 0.98 0.87 0.17 — Solid Flanged Standard 60 #8-32 X .75 Nylon 80° 90° 5.84ETC-14057 0.87 3.23 0.54 0.40 0.11 0.95 — 0.87 0.17 — Solid Straight Standard 60 #8-32 X .75 Nylon 80° 90° 6.52ETC-14151 1.52 5.90 0.96 0.98 0.87 1.46 1.36 2.29 0.21 1.51 U-Bar Flanged Standard 200 1/4-20 X 2.13 Bonded 60° 85° 8.11ETC-14152 1.76 5.90 1.23 0.98 0.16 1.46 — 2.28 0.21 1.33 U-Bar Straight Standard 200 1/4-20 X 2.13 Bonded 60° 85° 8.95ETC-14154 1.52 5.90 1.00 0.98 0.83 1.46 1.36 2.29 0.21 — Solid Flanged Standard 200 1/4-20 X 2.13 Bonded 60° 85° 8.83ETC-14157 1.76 5.90 1.26 0.98 0.16 1.46 — 2.29 0.21 — Solid Straight Standard 200 1/4-20 X 2.13 Bonded 60° 85° 11.29ETC-14251 1.96 6.88 1.31 0.99 0.89 1.51 1.36 2.91 0.28 1.31 U-Bar Flanged Standard 500 5/16-18 X 3.00 Bonded 65° 90° 9.34ETC-14252 2.18 6.88 1.66 0.99 0.23 1.51 — 2.91 0.28 1.42 U-Bar Straight Standard 500 5/16-18 X 3.00 Bonded 65° 90° 10.22ETC-14351 2.55 10.40 1.73 1.62 1.60 2.25 2.23 4.29 0.31 2.75 U-Bar Flanged Standard 750 3/8-16 X 3.50 Bonded 50° 85° 15.47ETC-14352 2.93 10.40 2.17 1.62 0.27 2.25 — 4.24 0.31 2.75 U-Bar Straight Standard 750 3/8-16 X 3.50 Bonded 50° 85° 17.06

ETC-14154

0121.qxd 2/17/2010 3:01 PM Page 121





















Cla

mp

s an

d W

ork

ho

ldin

gPULL-ACTION LATCH CLAMPS


Series TC-301, 311

Fixed stop automatically limits handle travel at variousclamping positions once the clamp is installed. Redvinyl handle for comfortable operation.


TC-301

DrawingMovement

HoldingCapacity (Lbs.)

Price Each1-49Cat. No. A B D E F G J K N

SteelTC-301 1.91 8.40 .75 1.25 1.38 1.75 .28 .56 .12 4.00 375 19.65TC-311 2.44 9.52 1.25 1.78 1.91 2.53 .33 .56 .13 3.38 1,200 26.50Stainless SteelTC-301-SS 1.91 8.40 .75 1.25 1.38 1.75 .28 .56 .12 4.00 375 45.37

Series TC-323, 331, 341

The threaded U-bolt permits easy adjustment and provides a positive connection with the supplied latch plate. Furnished with athumb control lever.


TC-323

Drawing Movement

Holding Capacity

(Lbs.)

PriceEach1-49Cat. No. A B C D E F G H J J1 K L N O

SteelTC-323 1.13 4.00 .39 .63 .75 1.02 1.11 .79 1.81 .17 .17 .75 .52 .13 .47 360 11.95TC-331 1.96 5.97 .56 .75 1.25 1.56 1.75 1.00 1.75 .27 .27 1.00 .69 .17 .66 700 15.91TC-341 2.89 7.50 .75 1.63 1.50 2.38 2.13 1.50 2.5 .33 .33 1.75 1.19 .31 .94 2,000 24.77Stainless SteelTC-323-SS 1.13 4.00 .39 .63 .75 1.02 1.11 .79 1.81 .17 .17 .75 .52 .13 .47 360 26.12TC-331-SS 1.96 5.97 .56 .75 1.25 1.56 1.75 1.00 1.75 .27 .27 1.00 .69 .17 .66 700 31.31TC-341-SS 2.89 7.50 .75 1.63 1.50 2.38 2.13 1.50 2.50 .33 .33 1.75 1.19 .31 .94 2,000 56.50

Series TC-323-R, TC-331-R, 341-RToggle-Lock Plus

Supplied with release lever catch which allows clamp to lock in closed position only. The threaded U-bolt provides easy adjustment anda positive connection with the supplied latch plate.


TC-331-R

DrawingMovement


Price Each1-49Cat. No. A B C D E F G H J O

SteelTC-323-R 1.23 4.00 .39 .63 .75 1.02 1.11 .79 1.17 .47 1.17 360 19.50TC-331-R 2.08 5.97 .56 .75 1.25 1.56 1.75 1.00 .27 .68 1.75 700 28.80TC-341-R 2.89 7.50 .75 1.63 1.50 2.38 2.12 1.50 .33 .94 2.50 2,000 42.18Stainless Steel

TC-323-RSS 1.23 4.00 .39 .63 .75 1.02 1.11 .79 1.17 .47 1.17 360 36.25TC-331-RSS 2.08 5.97 .56 .75 1.25 1.56 1.75 1.00 .27 .68 1.75 700 50.29TC-341-RSS 2.89 7.50 .75 1.63 1.50 2.38 2.12 1.50 .33 .94 2.50 2,000 83.44

0122.qxd 2/17/2010 3:02 PM Page 122

http://www.reidsupply.com/Detail.aspx?itm=TC-323-RSS







http://www.reidsupply.com/Detail.aspx?itm=TC-323-R









Clam

ps an

d W

orkh

old

ing

TC-375, 375-BHolding Capacity: 4,000 Lbs.Drawing Movement: 3-1/2

TC-385, 385-LHolding Capacity: 7,500 Lbs.Drawing Movement: 2-3/16

PULL-ACTION LATCH CLAMPS


Latch plate is notincluded, soldseparately below(except for TC-375-B).Furnished with athumb control lever.


TC-375TC-375-B

w/ Latch Plate(TC-375509)

TC-385 TC-385-L TC-385102

Price Each1-49Cat. No. A B C D E F G H K L N O

TC-375 4.19 9.63 1.38 2.25 2.25 3.44 3.19 2.25 1.75 3.13 .39 1.13 55.75TC-375-B* 4.19 9.63 — — — 2.81 1.00 1.38 1.75 .88 .39 1.13 49.05TC-375509 Steel Latch Plate For TC-375-B 6.24TC-385 3.63 8.75 1.38 2.25 2.25 3.44 3.19 2.25 2.13 3.13 .47 1.13 72.73TC-385-L 1.94 9.16 1.38 2.25 2.25 3.44 3.19 2.25 2.13 3.13 .47 1.13 87.71TC-385102 Steel Latch Plate For TC-375 and TC-385 16.93*Narrow base

Series TC-375-R, TC-385-RToggle-Lock Plus

Heavy duty models.Supplied with a releaselever which locks into theforged steel base in closedposition only. Latch platenot included.TC-375-R

TC-385-R

TC-385102

DrawingMovement


Price Each1-49Cat. No. A B C D E F G H J K L N O

TC-375-R 4.19 9.63 1.28 2.25 2.25 3.44 3.13 2.25 .41 1.75 3.13 .39 1.13 3.50 4,000 73.65TC-385-R 3.63 8.75 1.38 2.25 2.25 3.44 3.19 2.25 .41 2.13 3.13 .47 1.13 2.19 7,500 93.50TC-385102 Steel Latch Plate For TC-375 and TC-385 16.93

Series TC-330, 351, 371, 381

Pull bar is threaded for convenient adjustment. Furnished with a thumb control lever.Discount 30 applies.

B

Q

C A

FD

J

EN

G K

TC-351

Holding Capacity

(Lbs.)Price Each

1-49Cat. No. A B C D E FDrawing

Movement G J K N Q Min. Q Max.SteelTC-330 .90 5.64 .56 .50 1.23 1.00 2.31 1.69 .22 .31 .19 1.60 1.85 200 14.17TC-351 1.34 8.56 .75 .75 1.38 1.50 4.00 1.94 .20 .38 .31 1.75 2.18 375 12.15TC-351-B* 1.34 8.56 — 1.50 — 2.00 4.00 .56 .27 .44 .31 1.75 2.18 375 13.68TC-371 2.23 12.00 1.42 1.25 1.94 1.94 5.38 2.62 .34 .50 .39 2.02 2.83 750 29.15TC-381 2.71 13.45 1.81 1.13 2.38 2.13 6.13 3.38 .41 .63 .47 2.17 3.10 1,000 33.80Stainless SteelTC-330-SS .90 5.64 .56 .50 1.23 1.00 2.31 1.69 .22 .31 .19 1.60 1.85 200 25.96TC-351-SS 1.34 8.56 .75 .75 1.38 1.50 4.00 1.94 .20 .44 .31 1.75 2.18 375 26.40TC-351-BSS* 1.34 8.56 — 1.50 — 2.00 4.00 .56 .27 .44 .31 1.75 2.18 375 26.90TC-371-SS 2.23 12.00 1.42 1.25 1.94 1.94 5.38 2.62 .34 .50 .39 2.02 2.83 750 67.19*Narrow base

Series TC-351, 371Toggle-Lock Plus

Supplied with a release lever catchwhich allows the clamp to lock inclosed position only. Large handlepad improves operability. Pull baris threaded for adjustment.


D O

G

AC

E

N

K

BH

F

D

J

TC-351-R

DrawingMovement


Price Each1-49Cat. No. A B C D E F G H J K N

TC-351-R 1.42 9.10 .75 .75 1.38 1.50 1.94 2.18 .22 .38 .31 4.00 375 26.50TC-371-R 2.25 12.88 1.42 1.25 1.94 1.94 2.62 2.83 .34 .50 .39 5.38 750 49.78

0123.qxd 2/17/2010 3:02 PM Page 123

http://www.reidsupply.com/Detail.aspx?itm=TC-351-BSS


























Cla

mp

s an

d W

ork

ho

ldin

gPULL-ACTION LATCH CLAMPS


Series TC-324, 334, 344, 374

Latch plate included with all clamps listed below except TC-374. Furnished with a thumb control lever.


TC-334

ThreadSize

HoldingCapacity

(Lbs)Price Each

1-49Cat. No. A B C D E F G HDrawing

Movement J J1 K L M N O P QSteelTC-324 2.00 3.35 .56 .50 .88 1.00 1.38 1.00 1.53 .20 .17 .81 .53 2.69 .14 .19 .63 .91 M4 500 17.95TC-334 2.44 4.25 .81 .75 1.00 1.31 1.56 1.50 2.00 .28 .22 1.13 .68 3.69 .25 .35 .69 1.35 M6 1,000 22.28TC-344 3.24 5.35 1.06 1.25 1.44 1.94 2.13 2.13 2.50 .34 .34 1.75 1.19 5.31 .31 .50 1.25 1.93 M8 2,000 33.74TC-374 2.67 5.69 .56 1.25 1.50 2.50 2.50 2.72 1.75 .41 .25 1.63 1.13 4.94 .39 .56 .75 2.34 M10 4,000 87.28Stainless SteelTC-324-SS 2.00 3.35 .56 .50 .88 1.00 1.38 1.00 1.53 .20 .17 .81 .53 2.69 .14 .19 .63 .91 M4 500 33.96TC-334-SS 2.44 4.25 .81 .75 1.00 1.31 1.56 1.50 2.00 .28 .22 1.13 .68 3.69 .25 .35 .69 1.35 M6 1,000 40.02TC-344-SS 3.25 5.35 1.06 1.25 1.44 1.94 2.13 2.13 2.50 .34 .34 1.75 1.19 5.31 .31 .50 1.25 1.93 M8 2,000 67.69

0124.qxd 2/22/2010 8:49 AM Page 124









Clam

ps an

d W

orkh

old

ing

ECONOMY PULL-ACTION LATCH CLAMPSPull ActionLatch Clamps

All models have a blue handle grip. Clamps are supplied with latch plates.

L

ON

K G

A

E

CH

DF

ØJ

Q

B

Cat. No. A B C D E F G H J K L N OQ

Min.Q

Max.Holding

Cap. Lbs.Drawing

MovementHookSize

PriceEach

ETC-12230 1.31 4.18 0.40 0.62 0.76 1.03 1.12 0.78 0.17 0.80 0.55 0.13 0.44 1.84 2.57 360 1.81 M4 8.67ETC-12310 1.91 6.56 0.48 0.78 1.25 1.52 1.75 1.01 0.28 1.00 0.79 0.17 0.50 2.53 3.69 700 1.75 M5 11.56ETC-12410 2.75 8.48 0.76 1.62 1.44 2.39 2.12 1.17 0.34 1.75 1.17 0.31 0.83 4.39 5.37 2000 2.50 M8 18.01

Pull ActionLatch Clamps


ØJ

L E

H F

K G

B

A

C D

O

ØN

Q

ETC-12750

ETC-12850

Cat. No. A B C D E F G H J K L N OQ

Min.Q

Max.Holding

Cap. Lbs.Drawing

MovementHookSize

PriceEach

ETC-12750 3.96 11.39 1.37 2.24 2.28 3.43 3.21 2.32 0.41 1.71 3.14 0.39 1.17 6.22 7.21 4000 3.50 M10 37.32ETC-12850 3.63 10.18 1.37 2.24 2.26 3.43 3.17 2.32 0.41 2.06 3.14 0.46 1.08 6.13 7.25 7500 2.19 M12 48.70



A

Q

M

H

O

Ø N

P

L

C

Ø J

K

Cat. No. A B C D E F G H J K L M N O PQ

Min.Q

Max.Holding

Cap. Lbs.Drawing

MovementHookSize

PriceEach

ETC-12240 2.22 3.15 0.57 0.51 0.87 1.02 1.39 1.00 0.21 0.86 0.54 3.43 0.12 0.2 0.43 0.54 1.20 500 1.53 M4 12.01ETC-12340 2.86 4.71 0.81 0.75 1.02 1.30 1.56 1.50 0.28 1.06 0.67 4.36 0.23 0.25 0.64 0.54 1.50 1000 2.00 M6 14.90ETC-12440 3.60 5.25 1.06 1.25 1.47 1.86 2.11 2.13 0.35 1.74 1.19 5.75 0.31 0.5 0.79 2.14 2.11 2000 2.50 M8 22.26


All models have a blue handle grip. B Q

Ø N Ø K

A C /O

D

E G

F Ø J

Cat. No. A B C D E F G J NQ

Min.Q

Max.Holding

Cap. Lbs.Drawing

MovementHookSize

PriceEach

ETC-12510 1.45 8.33 0.74 0.94 1.44 1.50 1.99 0.24 0.30 1.53 3.11 375 4.00 M8 8.83ETC-12710 2.17 11.46 0.96 1.25 1.97 1.86 2.61 0.35 0.39 2.70 3.44 750 5.38 M10 18.53ETC-12810 2.62 13.80 1.82 1.13 2.49 2.13 3.30 0.41 0.47 2.75 3.60 1000 6.13 M12 17.55


All models have a blue handle grip.

ØJ

FD

E G

N

K

O A

B

Cat. No. A B D E F G J K N OHolding

Cap. Lbs.Drawing

MovementBar

TypePriceEach

ETC-12010 1.88 8.40 0.75 1.22 1.38 1.72 0.28 0.60 0.12 1.59 375 4.00 Fixed Hook 9.83

B

Ø J

E G

D

F

0125.qxd 2/17/2010 3:05 PM Page 125














Cla

mp

s an

d W

ork

ho

ldin

gSTRAIGHT-LINE ACTION CLAMPS


Series TC-601Holding Capacity: 100 Lbs.Plunger Travel: .63"

Series TC-6001-MHolding Capacity: 150 Lbs.Plunger Travel: .63"

Smallest of the straight-line toggle clamps. Ideal for electronicapplications and similar small fixturing. TC-601(shown) has an 8-32 nylon spindle (TC-105203). TC-601-SS has an 8-32 stainlesssteel spindle (TC-205943). TC-601-0 and TC-601-0SS have exter-nally threaded 1/4-20 plunger tips. TC-601-M has a M4 internalthread. TC-6001-M is a heavier duty version and has 50% greaterholding capacity. It is manufactured from heavy gauge materialand has a more flexible mounting base to enable side-mountingthe clamp. TC-6001-M has a M4 internal thread.

Note: Also available as power model TC-816. See page 141.


TC-601-0

TC-601TC-601, 601-0

TC-6001-M

TC-6001-M

PlungerType

PriceEach1-49Cat. No. A B C D E F G H J M N O P

SteelTC-601 1.19 2.62 .50 .63 .63 1.33 1.05 1.29 .17 .25 — — — 8-32 Tap 11.03TC-601-M 1.19 2.62 .50 .63 .63 1.33 1.05 1.29 .17 .25 — — — M4 Tap 13.90TC-601-0 1.19 2.86 .50 .63 .63 1.33 1.05 1.53 .17 1/4-20 — — — 1/4-20 Thd 12.00TC-6001-M 1.26 2.63 .50 .63 .63 1.54 1.23 1.10 .19 .28 .43 .33 .19 M4 Tap 15.63Stainless SteelTC-601-SS* 1.19 2.63 .50 .63 .63 1.33 1.05 1.29 .17 .25 — — — 8-32 Tap 23.59TC-601-0SS* 1.19 2.86 .50 .63 .63 1.31 1.05 1.53 .17 1/4-20 — — — 1/4-20 Thd 23.59TC-6001-MSS 1.26 2.63 .50 .63 .63 1.54 1.23 1.10 .19 .28 .43 .33 .19 M4 Tap 29.56*Handle does not have plastic grip

Series TC-602, 604, 624

Fully retractable locators, these models mount directly through amember by a jam nut on the work side, or flush by drilling andtapping the member. Locks in extended or retracted position.When flush mounted, plunger completely retracts from work area.An optional base mounting is available for TC-604 as TC-604106,and for TC-624 as TC-624108.


ØD

C

BA

PlungerTravel

TC-602

TC-604 TC-624 TC-6004

TC-624108Mounting Plate

TC-604106Mounting Plate

TravelB

HoldingCap. Lbs.

InternalThread

PriceEach1-49Cat. No. A C D Thread

SteelTC-602 3.14 .75 2.44 .37 5/8-18 200 1/4-20 x 5/8 15.60TC-602-MM 3.14 .75 2.44 .37 M16x1.5 200 M6 18.99TC-604 4.16 1.50 4.78 .44 3/4-16 300 5/16-18 x 1 17.45TC-604-MM 4.16 1.50 4.78 .44 M20x1.5 300 M8 23.92TC-6004 4.12 1.50 5.63 .50 3/4-16 450 5/16-18 31.53TC-6004-MM 4.12 1.50 5.63 .50 M20x1.5 450 M8 33.74TC-624 5.62 2.63 6.69 .62 1-14 700 3/8-16 x 11/4 36.72TC-604106 Optional Mounting Plate for TC-604 7.82TC-624108 Optional Mounting Plate for TC-624 9.66Stainless SteelTC-602-SS 3.14 .75 2.44 .38 5/8-18 200 1/4-20 x 5/8 51.54TC-604-SS 4.16 1.50 4.78 .44 3/4-16 400 5/16-18 x 1 46.14TC-624-SS 5.62 2.63 6.69 .62 1-14 700 3/8-16 x 11/4 96.36

TC-617Holding Capacity: 2,000 Lbs.Plunger Travel: 1"

Compact clamp with great holding capacity. Made from C-1008 orC-1010 low carbon, cold rolled steel with a black oxide finish.Hardened and ground pivots can be replaced. Forged clamp canbe cut or welded to suit fixturing or tooling needs. Plunger istapped 5/16-18 x 1” deep.

Discount 30 applies.Price Each

1-49Cat. No. A B C F G H MTC-617 5 7.00 1 1.75 .75 1 .50 105.47

Series TC-620Holding Capacity: 600 Lbs.Plunger Travel: 1-1/8”

TC-620 features a reverse handle action. As handle moves backand down to horizontal lock position, plunger moves forward. Canbe positioned for angular clamping by drilling base or may beused without base. TC-620 plungers are tapped 3/8-16 x 1” deep.TC-620-M plunger has M10 thread.


E

DØ.34

AB

ØF C


TC-620 2.25 1.67 11.70 1.63 1.63 .62 43.58TC-620-M 2.25 1.67 11.70 1.63 1.63 .62 56.81

0126.qxd 2/17/2010 3:05 PM Page 126

http://www.reidsupply.com/Detail.aspx?itm=TC-6001-MSS

http://www.reidsupply.com/Detail.aspx?itm=TC-601-0SS

http://www.reidsupply.com/Detail.aspx?itm=TC-6004-MM























Clam

ps an

d W

orkh

old

ing

STRAIGHT-LINE ACTION CLAMPS


Series TC-603Holding Capacity: 600 Lbs.Plunger Travel: 1-1/4"

This straight-line action toggle clamp has a large holding capacityfor its size. The TC-603 works well in confined areas because ofits small size and low height. TC-603 plunger is tapped 5/16-18 x1” deep for spindle. TC-603-M plunger has a M8x1.25 spindlethread.

Note: Also available as Power Model TC-803. See page 141.


D

E

A

C

B

7/32

F


SteelTC-603 3.28 .97 4.71 1.44 1.31 .44 20.81TC-603-M 3.28 .97 4.71 1.44 1.31 .44 24.05Stainless SteelTC-603-SS 3.28 .97 4.71 1.44 1.31 .44 47.57

Series TC-605, 615, 6015Holding Capacity: 300 Lbs.

For push and pull clamping. Furnished with red vinyl grip.Plungers on TC-605 and TC-615 are tapped 5/16-18 x 1” deepfor adjustment spindle. Base is heat treated for addedstrength. TC-615 is similar to TC-605 except it has reversehandle action. Plunger locks in the forward position only, asthe handle is moved downward. TC-605-M has M8 x 1.25spindle thread.


Travel

D

Ø J

B

F E G

A

CTC-6015-M

PlungerTravel


SteelTC-605 3.16 5.47 .97 1.38 1.63 .44 1.25 16.34TC-605-M 3.16 5.47 .97 1.38 1.63 .44 1.25 17.69TC-615 2.28 8.53 .97 1.38 1.63 .44 .97 26.03TC-6015-M 1.60 2.95 .50 1.75 .88 .38 .70 27.69Stainless SteelTC-6015-MSS 1.60 2.95 .50 1.75 .88 .38 .70 44.88

Series TC-6015-MR - Compact SizeToggle-Lock PlusHolding Capacity: 350 Lbs.Plunger Travel: .70”

Compact size allows use in confined areas and on small fixtures, where safety is a concern.Features a locking release lever which locks in the clamped position only.

Discount 30 applies.PlungerThread

Price Each1-49Cat. No. A B C D E F G H J M

SteelTC-6015-MR 1.60 2.95 .50 1.75 .88 2.25 1.25 .70 .22 .38 M6 x 1.0 36.61Stainless SteelTC-6015-MRSS 1.60 2.95 .50 1.75 .88 2.25 1.25 .70 .22 .38 M6 x 1.0 48.70

TC-603-RToggle-Lock PlusHolding Capacity: 600 Lbs.Plunger Travel: 1.25”

For use in confined areas. Theergonomic handle is slanted forwardto provide an adequate grip. Clamplocks in both the extended andretracted positions while the releaselever secures the clamp in theextended position only. Plunger istapped for 5/16-18 adjustmentspindle or detail.


1-49Cat. No. A B C D E F G H J MTC-603-R 3.42 4.69 .97 1.44 1.31 2.00 1.86 2.16 .27 .44 38.88

0127.qxd 2/23/2010 1:27 PM Page 127

http://www.reidsupply.com/Detail.aspx?itm=TC-6015-MRSS


http://www.reidsupply.com/Detail.aspx?itm=TC-6015-MR










Cla

mp

s an

d W

ork

ho

ldin

gSTRAIGHT-LINE ACTION CLAMPS


TC-606Holding Capacity: 450 Lbs.Plunger Travel: 1-1/2”

Features an unusual 180° swiveling handle and linkage. Canbe mounted in many positions with the handle remaining in anup-right or other convenient position. This feature along with anarrow base permits use where other clamps won’t fit. Heattreated base. TC-606 has a 7/16” diameter plunger tapped5/16-18 x 1” deep.


1-49Cat. No. A B C D E F G MTC-606 2.62 6.72 .88 1.25 .63 1.75 1.13 .44 30.59


Compact, low silhouette clamp locks in either extended orretracted position. Available with 1/2” round plunger or 1/2” squareplunger for multiple point locating. TC-607 and TC-607-SQ aredrilled and tapped 5/16-18 x 1” deep for spindle and TC-607-M.


E

ED

9/32" Dia.

B

C

A

PlungerType


TC-607 3.59 .69 6.02 1.38 1.63 1/2 dia. 31.93TC-607-M 3.59 .69 6.02 1.38 1.63 1/2 dia. 33.65TC-607-SQ 3.59 .69 6.02 1.38 1.63 1/2 sq. 49.86

TC-608Holding Capacity: 850 Lbs.Plunger Travel: 1-5/8”

Low profile clamp with cast base. Plunger locks in either retractedor extended positions. Plunger is tapped for 3/8-16 adjustmentspindle.


1-49Cat. No. A B C D E F G H J M

TC-608 4.04 6.13 1.25 1.63 1.63 2.31 2.25 3.00 .33 .62 36.66


Locks in either extended or retracted positions. The 1/2” diameterplunger is drilled and tapped 5/16-18 to accept customized fixtureor neoprene tipped spindle. Plunger retracts completely to clearthe work area. Available with a straight base,TC-609-B or aflanged base TC-609.


TC-609


TC-609 3.25 5.48 .97 1.38 1.62 3.60 2.19 1.88 .27 .50 18.87TC-609-B 4.28 5.48 1.56 1.38 — 3.60 .25 1.88 .27 .50 19.14

0128.qxd 2/22/2010 10:29 AM Page 128

http://www.reidsupply.com/Detail.aspx?itm=TC-607-SQ








Clam

ps an

d W

orkh

old

ing

STRAIGHT-LINE ACTION CLAMPS


Series TC-630, 640

A

C

PlungerTravel

D

ø.41

E

B

F

D

Forged alloy steel base designed for heavy duty service. Ruggedhandle is red vinyl coated for easy operation. Low silhouette,maximum capacity for the size. Plunger locks in extended orretracted position. TC-630 plunger is tapped 3/8-16 x 1-1/4” deepfor adjustment spindle. TC-640 plunger is tapped 1/2-13 x 2” deepfor adjustment spindle. TC-630-M has M10 thread.

Note: Also available as Toggle-Lock Plus Model TC-630-R. See page129. For Power Model TC-830. See page 141.


D E

ø.34

EF

TC-630 TC-640

HoldingCapacity

(Lbs.)PlungerTravel


TC-630 3.09 .81 7.03 1.38 1.63 .63 2,500 2 39.04TC-630-M 3.09 .81 7.03 1.38 1.63 .63 2,500 2 41.79TC-640 4.38 1.25 12.66 3.56 2.12 .87 7,500 4 107.61

TC-630

Series TC-610Holding Capacity: 800 Lbs.

TC-610 features balanced construction for rigid holding andassured long life. Plunger tip is drilled and tapped 3/8-16 x 1”deep for spindle. TC-610-M has M10 thread.

Discount 30 applies.BaseType


TC-610 4.38 1.70 6.72 1.63 1.63 .63 Flanged 29.31TC-610-M 4.38 1.70 6.72 1.63 1.63 .63 Flanged 33.81

TC-650 Holding Capacity: 16,000 Lbs.Plunger Travel: 3"

Largest holding capacity of the straight line action clamps. TC-650is precision built with forged alloy steel handle and base. Base isheat treated for added strength. Snap ring pivot pin constructionallows easy removal of plunger even after unit is mounted. TC-650plunger is tapped 5/8-11 x 2” deep.

Note: Also available as Power Model TC-850. See page 141.


1-49Cat. No. A B C D E G H J MTC-650 4.88 11.25 2.25 2.75 2.25 3.13 6.25 .41 1 124.91

TC-95030, 95040, 95050, 95060

Low profile to use where overhead clearance is a problem.Handle can be easily disassembled and re-assembled in thereverse position, allowing more flexibility. Plunger is tapped withmetric thread.


A

C

B

TRAVELPLUNGER

H D D

F

E GM

J

TC-95030


TC-95030 2.32 4.13 .31 .98 .98 3.07 1.38 .20 .22 .39 32.08TC-95040 3.00 5.91 .39 1.38 1.38 4.33 1.97 .33 .26 .55 39.50TC-95050 3.50 7.52 .55 1.77 1.77 5.59 2.56 .39 .33 .75 50.97TC-95060 4.08 9.17 .63 2.17 2.17 6.73 3.00 .39 .41 .87 66.35

HoldingCapacity

PlungerTravel

PlungerThreadCat. No.

TC-95030 550 .98 M6TC-95040 1,100 1.50 M8TC-95050 1,650 1.97 M12TC-95060 3,965 2.36 M12

TC-630-RToggle-Lock PlusHolding Capacity: 2,500 Lbs.Plunger Travel: 2”

Locking release lever locks into the rugged forged steel base.Large handle pad for greater comfort. Plunger is tapped 3/8-16 x1-1/4” deep to accommodate spindle assembly.


1-49Cat. No. A B C D D1 E F G H J M

TC-630-R 3.06 7.03 .81 1.38 1.63 1.63 5.03 2.30 2 .34 .62 77.06

0129.qxd 2/17/2010 3:06 PM Page 129

















Cla

mp

s an

d W

ork

ho

ldin

g

ETC-13485

ETC-13585

ECONOMY STRAIGHT-LINE ACTION CLAMPSStraight-LineAction Clamp

All models have a blue handle grip. Spindle assemblies are supplied.

F

E G

D ØJ

M

C C

H

ØJ B

A A ETC-13100

ETC-13180

Cat. No. A B C D E F G H J MHolding

Cap. Lbs.PlungerTravel

SpindleSize

PriceEach

ETC-13100 5.04 6.82 1.75 1.63 1.58 2.25 2.20 4.23 0.34 0.62 800 1.63 3/8-16 X 1.25 19.60ETC-13180 5.80 6.79 2.36 1.63 — 2.25 0.24 4.23 0.34 0.62 800 1.63 3/8-16 X 1.25 32.96

Straight-LineAction Clamp

All models have a blue handle grip. Spindle assemblies are supplied.

C

B

A

H

D D1F

E G

Ø M

Ø J

Cat. No. A B C D D1 E F G H J MHolding


SpindleSize

PriceEach

ETC-13070 3.28 6.10 0.68 1.38 1.63 1.63 4.30 2.18 1.86 0.28 0.51 800 1.63 5/16-18 X 1.00 22.54ETC-13300 2.93 7.06 0.88 1.38 1.39 1.63 5.25 2.24 1.82 0.35 0.63 2500 2.00 3/8-16 X 1.25 28.39


All models have a blue handle grip. Spindles are supplied.B

A

C

Ø M

C

A

H

D

E G

Ø J

F

M



SpindleSize

HandleType

PriceEach

ETC-13030 3.34 3.64 0.98 1.44 1.32 2.30 1.85 2.03 0.23 0.43 600 1.25 5/16-18 X 1.00 45° 15.11ETC-13485 4.19 6.41 1.25 1.62 1.63 2.33 2.25 3.13 0.33 0.63 850 1.65 3/8-16 X 1.25 45° 24.53ETC-13415 4.95 9.39 1.78 1.99 2.00 2.89 2.48 5.00 0.34 0.70 1500 2.36 1/2-13 X 2.00 45° 15.53ETC-13585 4.75 6.41 1.25 1.60 1.62 2.33 2.25 3.14 0.33 0.62 850 1.65 3/8-16 X 1.25 90° 27.72ETC-13515 6.93 9.38 1.83 2.00 2.02 2.85 2.82 5.75 0.35 0.70 1500 2.36 1/2-13 X 2.00 90° 27.72


All models have a blue handle grip. Spindles are supplied.

F

D

ØJ

E G

A

H

C

B

ØM



SpindleSize

PriceEach

ETC-13090 4.10 5.00 0.85 1.57 1.33 3.27 1.95 1.71 0.26 0.47 300 1.25 5/16-18 X 1.00 12.65

0130.qxd 2/17/2010 3:08 PM Page 130












Clam

ps an

d W

orkh

old

ingECONOMY STRAIGHT-LINE ACTION CLAMPS



E G

M

J

FD

A

C

HB

ETC-13010

ETC-13011



SpindleSize

PriceEach

ETC-13010 1.57 2.67 0.52 0.63 0.61 1.31 1.07 1.35 0.17 0.25 100 .63 #8-32 X .50 DP 7.79ETC-13011* 1.59 2.85 0.57 0.63 0.61 1.31 1.07 1.53 0.17 1/4-20 100 .63 1/4-20 X .50 LG 8.03

*External thread



C H

B

A

J L (FLATS)

Ø F

K

D

Cat. No. A B C D F H J K LHolding


SpindleSize

BaseType

PriceEach

ETC-13020 3.06 2.67 0.48 1.03 0.37 0.81 0.58 0.26 0.94 200 .75 1/4-20 X .63 Through-Hole 10.97ETC-13040 4.16 4.26 0.63 1.28 0.43 1.57 0.73 0.25 1.17 300 1.50 5/16-18 X 1.00 Through-Hole 12.29ETC-13240 5.43 6.73 0.88 1.86 0.63 2.80 1.05 0.35 1.59 700 2.63 3/8-16 X 1.25 Through-Hole 24.60



FD

ØJ

E G

ØM

A

C

HB



SpindleSize

PriceEach

ETC-13050 3.14 5.45 0.98 1.38 1.64 3.55 2.22 1.90 0.22 0.47 300 1.25 5/16-18 X 1.00 11.53

0131.qxd 2/17/2010 3:08 PM Page 131








Cla

mp

s an

d W

ork

ho

ldin

g

TC-2010 TC-2020

TC-2040 TC-2050

STRAIGHT-LINE ACTION CLAMPSDesigned for quick action where there are wide size variations from part to part or where the opening and closing motions need to belong. In operation, the plunger is pushed forward until it contacts the work piece. The locking lever is then rotated clockwise whichadvances the plunger and simultaneously locks it with the collet action. Short stroke models are single handled and long stroke models(with interchangeable length plungers) have a separate locking handle. All dimensions below are metric. Accessory plungers for longstroke models and plunger tips are sold separately.

TC-1000Through Hole Mount - Hand Knob

10

M24 x 1.5 Metric

35 Dia.

PlungerTappedThread

mm

PlungerDia.mm

StrokeLgth.mm

PriceEachCat. No. De-Sta-Co

HandleType

Interchg.Plungers

HoldingCap. Lbs.

TC-1000 G-082/40 8 M5x0.80 40 Hand Knob No 300 174.77

TC-1010Through Hole Mount - Lever

23

80R

40

12

1812

M30 x 1.5 Metric

PlungerTappedThread

mm

PlungerDia.mm

StrokeLgth.mm


Interchg.Plungers

HoldingCap. Lbs.

TC-1010 G-121/45 12 M6x1.00 45 No 600 238.51

TC-2000, 2030Foot Mount - Hand Knob

30.5

55

6.5 Dia. 2 Holes8R

52

44

25

1010

18

6

40

TC-2030TC-2000

PlungerTappedThread

mm

PlungerDia.mm

StrokeLgth.mm


HoldingCap. Lbs.

TC-2000 FO-082/40 8 M5x0.80 40 300 174.77TC-2030 FO-122/45 12 M6x1.00 45 600 215.25

TC-2010, 2020, 2040, 2050Foot Mount - Locking Lever

23

115R

1720

74

3058

7090

26R

23 40

12

M6

115

4220

2,5

44Stroke

12

40

3 2

12

TC-2010, 2020 TC-2040, 2050

Cat. No. De-Sta-Co

PlungerDia.mm

PlungerTappedThread

mm

StrokeLgth.mm

Interchg.Plungers

HoldingCap. Lbs.

PriceEach

TC-2010 FO-121/45 12 M6x1.00 45 No 600 225.59TC-2020* FO-120/- 12 M6x1.00 — Yes 600 197.72TC-2040 FO-161/60 16 M8x1.25 60 No 2,000 291.80TC-2050* FO-160/- 16 M8x1.25 — Yes 2,000 250.90*Long stroke models. Attached lever. Interchangeable plungers soldseparately.

TC-3000, 3010, 3020, 3030Flange Mount - Locking Lever

1218

43.5

40

6

12

30

23

80R

52

8R 6.5 Dia. 2 Holes

58.8

20

46

40

14

14

30

23

115R

51

10R

17

TC-3010

TC-3020

TC-3000TC-3010

TC-3020TC-3030TC-3030

Cat. No. De-Sta-Co

PlungerDia.mm

PlungerTappedThread

mm

StrokeLgth.mm

Interchg.Plungers

HoldingCap. Lbs.

PriceEach

TC-3000 FL-121/45 12 M6x1.00 45 No 600 225.59TC-3010* FL-120/- 12 M6x1.00 — Yes 600 203.70TC-3020 FL-161/60 16 M8x1.25 60 No 2,000 291.80TC-3030* FL-160/- 16 M8x1.25 — Yes 2,000 257.09*Long stroke models. Attached levers. Interchangeable plungers soldseparately.

Series TC-4000Plungers for Long Stroke Models

CA

B

D

Cat. No. De-Sta-CoA

mmB

mmC

mmD

mmStroke

mmPriceEach

TC-4000 12/100 198 12 29 M6x1.00 100 23.31TC-4010 12/200 298 12 29 M6x1.00 200 32.45TC-4020 12/300 400 12 29 M6x1.00 300 36.38TC-4030 16/100 215 16 35 M8x1.25 100 30.61TC-4040 16/200 315 16 35 M8x1.25 200 35.70TC-4050 16/300 416 16 35 M8x1.25 300 46.73

Series TC-5000Swivel Face Thrust Pads for Plunger Tips

A

7 MAX. TILT

B D

C

Thd.D

mmCat. No. De-Sta-CoA

mmB

mmC

mmPriceEach

TC-5000 K508 6 9.2 8 M5x0.80 14.12TC-5010 K612 8.5 12.5 10 M6x1.00 12.55TC-5020 K816 10 14.8 14 M8x1.25 15.59

0132.qxd 2/17/2010 3:09 PM Page 132























Clam

ps an

d W

orkh

old

ing

STRAIGHT-LINE ACTION CLAMPSDesigned for quick action where there are wide size variations from part to part or where the opening and closing motions need to belong. In operation, the plunger is pushed forward until it contacts the work piece. The locking lever is then rotated clockwise whichadvances the plunger and simultaneously locks it with the collet action. See pages 136 and 137 for accessories.


Series TC-FRF, FRL

To operate:• Slide spindle bar forward to contact the work piece• Turn the locking lever clockwise to engage the locking mechanism• Turn knob handle to “fine” to adjust the clamping force• After operation is finished, turn the locking lever counter-clockwise to disengage locking mechanism


Series FRF Series FRL

Cat. No.HoldingCapacity Stroke A B C D E F G H J

Price Each1-49

TC-FRF-12 5,500 0 - 33/8 6.46 1.26 .67 .75 1.97 1.50 1.30 .24 .22 68.84TC-FRF-16 11,000 0 - 55/16 9.25 1.69 .87 .98 2.54 1.91 1.65 .31 .28 84.54TC-FRL-12 5,500 0 - 33/8 6.46 1.26 .63 .75 2.17 1.77 .79 .24 .22 68.84TC-FRL-16 11,000 0 - 55/16 9.25 1.69 .79 .98 2.56 2.09 1.10 .31 .28 84.54

SQUEEZE ACTION PLIER CLAMPSSeries TC-325Holding Capacity: 800 Lbs. (max)Jaw Moves: 90°, Handle Moves: 50°

Designed for attachment by welding front of top of base tocontainer or cover. Forged alloy steel jaw moves 90° to clearcompletely. Red vinyl grip provides easy operation and good-looking appearance. TC-325 is furnished with M12 hex headspindle (TC-325203-M) and lock nut. TC-325-SS furnished withstainless steel M12 hex head spindle (TC-325943-M) and lock nut.


Cat. No. A B C D E F G HPrice Each

1-49SteelTC-325 8.68 2.62 1.78 .75 2.94 1.25 .50 .27 24.50Stainless SteelTC-325-SS 8.68 2.62 1.78 .75 2.94 1.25 .50 .27 66.43

TC-345Holding Capacity: 800 Lbs. (max.)Jaw Moves: 86°, Handle Moves: 60°

Designed for bolting or welding to a fixture at any point alongbase, or base can be cut off for end welding. This model hasa forged steel jaw with M10 swivel foot spindle assembly(TC-468206-M).


Cat. No. B C D FSpindleThread

Price Each1-49

TC-345 6.56 10.12 .69 2.69 M10 57.18

0133.qxd 2/22/2010 10:32 AM Page 133

http://www.reidsupply.com/Detail.aspx?itm=TC-FRF-12

http://www.reidsupply.com/Detail.aspx?itm=TC-FRF-16

http://www.reidsupply.com/Detail.aspx?itm=TC-FRL-12

http://www.reidsupply.com/Detail.aspx?itm=TC-FRL-16





Cla

mp

s an

d W

ork

ho

ldin

gSQUEEZE ACTION PLIER CLAMPS


TC-425, 435, 445, 470

These high strength squeeze action clamps are ideal for ruggedclamping applications. Made from SAE 1045 steel for strength.Two way trigger release allows for fast unclamping. Supplied withspindle.


TC-425

TC-435

TC-445

TC-470

Cat. No.HoldingCapacity A B C D E F

SpindleSupplied

Price Each1-49

TC-425 500 1.63 5.55 1.10 .39 2.56 1.83 (1) M6 x 1.0 21.68TC-435 500 1.63 5.55 1.77 .39 3.23 1.83 (2) M6 x 1.0 22.99TC-445 2,000 2.00 8.27 2.09 .63 4.41 2.76 (1) M10 x 1.0 34.75TC-470 2,000 2.00 8.27 3.35 .63 5.63 2.76 (2) M10 x 1.0 77.49


TC-441 has a M8 adjustment spindle (TC-441203-M). TC-441-2has two adjustment spindles (TC-461203-M). Maximum jawopening is 2-55/64”.


Cat. No. A B C D E FPrice Each

1-49TC-441 1.97 6.06 1.25 .50 2.86 1.77 21.41TC-441-2 1.97 6.06 1.25 .50 2.86 1.77 23.47

TC-443Holding Capacity: 500 Lbs.

Compact design features wide angle 64° jaw opening. Two-waytrigger release is standard. TC-443 comes with M8 hex headspindle assembly (TC-441203-M).


Cat. No. A B C D F ThreadPrice Each

1-49TC-443 2.47 6.70 1.39 .56 1.88 M8 97.07


Tempered spring-steel jaws have exceptional 2-15/16” jawdepth. TC-431 has single neoprene tipped adjustment spindle(TC-424208-M). Maximum opening is 3-1/16”.


AC

431-2

431

E

D

B

F

Cat. No. A B C D E FPrice Each

1-49TC-431 2.41 6.88 .75 .50 3.06 2.92 21.75

0134.qxd 2/17/2010 3:09 PM Page 134










Clam

ps an

d W

orkh

old

ing

SQUEEZE ACTION PLIER CLAMPS


TC-463, 491, 482, 484, 486

Most models have trigger release for easy one hand operation. Ideal for clamping and fixturing, holding and processing, etc.


TC-463

TC-491

HoldingCapacity

SpindleType

No. ofSpindles

Spindle(s)Furnished

TriggerRelease

E SpindleThread

Price Each1-49Cat. No. A B C D

TC-463 700 Std. 2 TC-468206-M & TC-210203-M Yes 2.69 3.00 8.50 2.72 M10 36.34TC-491 850 Std. 1 TC-491203-M Yes 2.87 1.00 10.10 3.50 M10 86.75TC-482 1,200 Std. 1 TC-468206-M Yes 2.80 1.70 9.19 2.56 M10 43.28TC-484 1,200 Std. 2 TC-468206-M & TC-210203-M Yes 2.69 3.83 9.06 2.56 M10 44.99TC-486 1,000 Std. 2 TC-240203-M Yes 2.88 6.00 9.22 2.56 M10 48.27

TC-462

Furnished with M10 swivel-foot adjustment spindle (TC-468206-M)and two-way trigger release. Forged alloy steel components, clevistype construction with stainless steel rivets.

Discount 30 applies.Holding

Cap. Lbs.Price Each

1-49Cat. No. A B C D E FTC-462 2.69 8.47 1.75 .69 4.10 2.78 700 31.69


Smallest of the forged alloy steel squeeze action clamps.TC-424 has a single M6 neoprene tipped adjustment spindle(TC-424208-M). TC-424-2 has two neoprene tipped adjustmentspindles (TC-431208-M). Maximum jaw opening is 2-1/16”.


TC-424-2


TC-424 1.94 4.75 1 .50 2.06 1.08 16.22TC-424-2 1.94 4.75 1 .50 2.06 1.08 16.87

TC-453Holding Capacity: 1,000 Lbs.

Features a special action to provide full 88° clearance in theopen position. This is particularly suited for clamping parts andassemblies where fast action, max. jaw clearance is essential.Two-way trigger release. Furnished with one M10 swivel footassembly (TC-468206-M) and one M10 hex head spindleassembly (TC-491203-M).


1-49Cat. No. A B C D F ThreadTC-453 2.77 8.56 3 .69 2.5 M10 43.80


Furnished with M10 swivel foot adjustment spindle assembly(TC-468206-M). Forged alloy steel components and clevis typeconstruction with stainless steel rivets.


1-49Cat. No. A B C D E FTC-468 2.66 8.47 1.75 .69 4.10 2.75 43.68

0135.qxd 3/5/2010 3:00 PM Page 135



















Cla

mp

s an

d W

ork

ho

ldin

gCLAMP ACCESSORIES

Hex Head Assemblies with Locknuts


TC-105203

TC-205943

Cat. No. Thread Thread Lgth. OALPrice Each

1-99Steel - InchTC-105203 8-32 Nylon Bolt .75 .84 .92TC-305203 10-32 1.00 1.09 .92TC-205203 1/4-20 1.69 1.88 1.15TC-202203 1/4-20 3.00 3.13 1.15TC-461203 5/16-18 .81 1.00 1.22TC-441203 5/16-18 1.75 1.94 1.51TC-207203 5/16-18 2.50 2.75 1.12TC-491203 3/8-16 1.25 1.50 1.22TC-210203 3/8-16 2.75 3.00 1.23TC-240203 3/8-16 4.00 4.25 2.15TC-527203 3/8-16 5.00 5.25 2.06TC-325203 1/2-13 2.50 2.75 1.89TC-220203 1/2-13 3.00 3.31 2.11TC-250203 5/8-11 4.00 4.38 3.44Steel - MetricTC-325203-M M12 2.56 2.83 2.00TC-210203-M M10 2.76 3.03 1.40TC-240203-M M10 4.00 4.25 2.41TC-441203-M M8 1.75 1.94 1.49TC-461203-M M8 .81 1.00 1.51TC-491203-M M10 1.25 1.50 1.65Stainless Steel - InchTC-205943 8-32 .75 .86 1.40TC-213943 8-32 1.03 1.13 2.67TC-201943 10-32 1.03 1.13 1.52TC-202943 1/4 -20 1.38 1.50 1.52TC-207943 5/16-18 2.31 2.50 3.56TC-237943 3/8-16 2.25 2.50 3.94

Flat-Tip Bonded Assemblies with Neoprene Cap and Locknuts


Flat Tip

Low Cushion


1-99Flat Tip - InchTC-201208 10-32 1.00 1.38 1.52TC-431208 1/4-20 .63 1.00 1.69TC-424208 1/4-20 1.13 1.50 1.69TC-202208 1/4-20 1.25 1.63 1.82TC-215208 1/4-20 1.66 2.19 2.15TC-225208 5/16-18 1.50 2.25 2.15TC-507208 5/16-18 2.31 3.06 2.18TC-240208 3/8-16 2.31 3.31 2.85TC-527208 3/8-16 2.50 3.50 3.15TC-235208 3/8-16 4.88 5.88 3.83TC-247208 1/2-13 2.69 4.00 4.29TC-267208 5/8-11 3.63 5.00 5.08Flat Tip - MetricTC-102208-M M4 1.00 1.25 1.80TC-431208-M M6 0.63 1.00 1.69TC-424208-M M6 1.13 1.50 1.69TC-202208-M M6 1.25 1.73 1.95TC-215208-M M6 1.66 2.19 2.18TC-225208-M M8 1.50 2.25 2.18TC-507208-M M8 2.31 3.06 2.30TC-240208-M M10 2.31 3.31 3.02TC-235208-M M10 4.88 5.88 4.22TC-247208-M M12 2.68 3.82 5.95Flat Tip Low Cushion w/ Locknuts - MetricTC-205208-M M4 .76 .87 1.90TC-201208-M M4 1.06 1.26 1.57TC-213208-M M5 1.14 1.34 1.59TC-305208-M M5 .94 1.14 1.82TC-307208-M M8 1.34 1.69 2.09

Cone-Tip Bonded Neoprene Cap Assemblies with Locknuts



1-99TC-305208 10-32 1.00 1.44 1.82TC-213208 1/4-20 1.50 2.13 2.22TC-509208 5/16-18 2.25 2.94 2.30TC-519208 5/16-18 4.75 5.38 3.21TC-220208 3/8-16 2.00 2.88 2.62TC-210208 3/8-16 2.50 3.44 2.47

Plunger-Matic Assemblies

Automatically compensates for variations in part thicknesses. Tobe mounted to plunger clamps.

Discount 36 applies.ThreadLgth.

Lbs.Pressure*

Max. SpringCompression

Price Each1-99Cat. No. Thread OAL

TC-905 5/16-18 .75 2.50 135 3/16 15.21TC-920 3/8-16 1.13 3.63 308 3/8 20.08*Per 1/8” deflection

Swivel Foot Assemblies with Locknuts



1-99InchTC-207206 1/4-20 1.50 2.38 3.83TC-507206 5/16-18 1.94 2.75 4.06TC-468206* 3/8-16 2.00 3.00 4.29TC-210206 3/8-16 2.44 3.38 4.63TC-250206 1/2-13 3.50 4.63 7.18MetricTC-468206-M M10 2.00 3.00 4.34*Threaded to the foot with knurled end

Neoprene Swivel Foot Assemblies


Cat. No. Thread Thread Lgth. OAL Pad Dia.Price Each

1-99TC-207209 1/4-20 1.50 2.63 1.00 8.16TC-507209 5/16-18 1.94 3.00 1.50 9.08TC-210209 3/8-16 2.44 3.63 2.00 9.78

0136.qxd 2/17/2010 3:10 PM Page 136








































































Clam

ps an

d W

orkh

old

ing

CLAMP ACCESSORIESNeoprene Caps

Slip on the heads of thehex head spindles.


Cat. No. OD ID Height For Spindle Dia.Price Each

1-99TC-215119 .63 .25 .44 1/4 .51TC-225119 .75 .31 .50 5/16 .56TC-235119 .78 .38 .53 3/8 .66

Neoprene Caps

Designed to fit over thethreaded end of a spindle.


Cat. No. For Spindle Dia.Price Each

1-99TC-424107 7/32 .51TC-235110 11/32 .64

Latch Plates


A B C D

For Use w/ Clamp

Price Each1-99

For Usew/ Clamp

Price Each1-99Cat. No. Style Cat. No. Style

Steel Stainless SteelTC-323104-M A TC-323 1.97 TC-323104-MSS A TC-323-SS 2.90TC-324101 B TC-324 1.97 TC-331905 A TC-331-SS 3.88TC-331005 A TC-331, 331-R 2.11 TC-341905 A TC-341-SS 10.65TC-334101 B TC-334 2.47TC-341005 A TC-341,341-R 3.29TC-344101 B TC-344 3.15TC-375509 C TC-375-B 6.24TC-385102 D TC-375, TC-385 16.93

Hook Assemblies with Locknuts


U-Hook J-Hook

For Use w/ Clamp

PriceEach1-99

For Usew/ Clamp

PriceEach1-99Cat. No. Style Cat. No. Style

Steel Stainless SteelTC-323215 U-Hook TC-323 3.33 TC-323915 U-Hook TC-323-SS 7.49TC-324215 U-Hook TC-324 3.15 TC-331915 U-Hook TC-331-SS 6.67TC-331215 U-Hook TC-331 2.78 TC-341915 U-Hook TC-341-SS 11.06TC-334215 U-Hook TC-334 3.02 TC-344915 U-Hook TC-344-SS 11.06TC-341215 U-Hook TC-341 4.81 TC-330915* J-Hook TC-330-SS 4.45TC-344215 U-Hook TC-344 4.86 TC-351915 J-Hook TC-351-SS 6.66TC-375215 U-HookTC-375, 375-R 6.66TC-385215 U-Hook TC-385 7.57TC-330215*J-Hook TC-330 2.14TC-371215 J-Hook TC-371 5.09*Supplied with two jam nuts

Polyurethane Caps

Internally threaded to screw on to spindle. High oil and abrasionresistance. Good memory.


Cat. No. For Spindle Dia.Price Each

1-99Flat TipTC-215219 1/4 1.28TC-225219 5/16 1.28TC-235219 3/8 1.43Cone TipTC-215319 1/4 1.28TC-225319 5/16 1.26TC-235319 3/8 1.43

Flanged Washers for U-Bar Clamps

Discount 36 applies.PriceEach1-99

PriceEach1-99Cat. No.

Use w/ Spindle Cat. No.

Usew/ Spindle

Steel Stainless SteelTC-102111 No.10 Spindle .27 TC-102911 No.10 Spindle .35TC-105106 No. 8 Spindle .23 TC-507907 5/16 Spindle .76TC-215105 1/4 Spindle .29 TC-235906 3/8 Spindle 1.04TC-507107 5/16 Spindle .33TC-235106 3/8 Spindle .40TC-247109 1/2 Spindle .76TC-267102 5/8 Spindle 1.09

Bolt Retainers for Clamps with Solid Hold Down Bars


Cat. No. DescriptionPrice Each

1-99TC-207105 1.25 Bolt Retainer for 5/16 Spindle 1.57TC-210114 1.50 Bolt Retainer for 3/8 Spindle 2.30TC-247110 1.63 Bolt Retainer for 1/2 Spindle 3.76TC-110122 1.88 Bolt Retainer for 5/8 Spindle 6.62TC-250121 1.88 Bolt Retainer for 1/2 Spindle 5.09

Ergonomic Grips

Provides a safe and comfortable grippingsurface for vertical hold down clamps. Theadditional guard helps protect againstpotential pinch points.Item Description Price EachTC-202305 Fits 202, 2002 series clamps .94TC-207305 Fits 207, 2007 series clamps 1.58

0137.qxd 2/23/2010 12:46 PM Page 137




















































































Cla

mp

s an

d W

ork

ho

ldin

gECONOMY CLAMP ACCESSORIES

Bolt Retainers

B

A

d F1

Cat. No. A B F1 d Price EachETC-19516 1.20 0.64 0.25 0.32 .80ETC-19380 1.47 0.74 0.33 0.41 .89ETC-19120 1.70 1.19 0.38 0.67 1.27

Swivel Foot Spindles

D

L1 L G

Hex Head Spindles

L1 L

D

G

Cat. No. D G L L1 Price EachETC-19338 0.55 3/8-16 3.23 3.00 1.02ETC-19310 0.74 1/2-13 3.31 3.00 1.73ETC-19112 0.43 1/4-20 1.65 1.50 .82ETC-19212 0.49 5/16-18 2.71 2.50 .89

Bonded Neoprene Spindles

L1

L

D

G

Cat. No. D G L L1 Price EachETC-19312 0.88 3/8-16 3.44 2.60 1.91ETC-19218 0.59 1/4-20 2.17 1.59 1.28ETC-19316 0.49 5/16-18 3.05 2.31 1.41

Cat. No. D G L L1 Price EachETC-19214 0.43 1/4-20 2.40 2.12 2.10ETC-19234 0.47 5/16-18 2.83 2.48 2.25ETC-19300 0.63 3/8-16 3.18 2.80 2.58

0138.qxd 2/22/2010 10:46 AM Page 138















Clam

ps an

d W

orkh

old

ing

PNEUMATIC HOLD-DOWN CLAMPSPneumatic cylinder provides the activating force for these over-center toggle clamps. Built to perform repetitive production operations.Portable and economical for use on short run jobs with temporary fixturing. Magnetic ring cylinders are used when there is a need tosense the open/close position of the cylinder. By adding a sensing switch, the position of the cylinder can be sensed. All these modelscome with magnetic ring for sensing capability. See page 147 for sensor options.

See page 147 for pneumatic clamp accessories.

Cyl.Area

(Sq. In.)

Max. InletPress atMax.MA

psig

Max.Mechanical Advantage

ESpindle

SizeCyl.Bore

Max. Hold.Cap. (Lbs.)

Exert. Force80 psig (Lbs.)

PriceEachCat. No. P A D F G H J Port Size

TC-812 .75 .44 80 150 2.7:1 to 3.8:1 98/135 5.60 1.50 1.02 10-32 .69 .94 .69 .17 10-32NF 96.15TC-802-U 1.13 .99 40 200 2:1 to 5:1 160/200 7.39 2.34 1.72 M6 1.06 1.06 .50 .22 1/8 NPT 103.93TC-807-S 1.13 .99 80 500 2:1 to 6.1 150/500 9.96 3.00 3.13 5/16 1.38 1.25 .75 .28 1/8 NPT 115.10TC-807-U 1.13 .99 55 350 3:1 to 6.1 150/350 9.21 3.00 2.50 5/16 1.38 1.25 .75 .28 1/8 NPT 115.10TC-8021 1.12 .994 105 390 2.2:1 to 1.3:1 100/175 9.31 2.19 2.25 .38 1.56 1.50 .79 .21 1/8 NPT 274.97TC-8071 1.50 1.77 105 450 2.4:1 to 4.2:1 250/450 10.93 2.59 2.50 .31 1.66 1.58 1.97 .28 1/8 NPT 323.86TC-8101 2.00 3.141 110 700 2.0:1 to 1.1:1 275/500 15.30 3.50 4.00 .38 2.87 2.20 3.54 .34 1/4 NPT 450.97TC-810-S 1.50 1.77 80 750 2.9:1 to 5:1 400/700 12.13 3.79 3.48 .38 1.80 1.78 1.25 .33 1/8 NPT* 195.95TC-810-U 1.50 1.77 70 600 2.9:1 to 5:1 400/600 12.28 3.79 3.58 — 1.80 1.78 1.25 .33 1/8 NPT* 187.46TC-846 1.50 1.77 125 750 3.5:1 to 5.6:1 500/750 10.50 3.63 2.13 — 1.63 1.50 1.00 .28 1/8 NPT* 335.91TC-847-S 2.00 3.14 80 1,000 1.8:1 to 4:1 450/1000 16.00 4.34 4.88 .50 2.25 1.78 1.25 .34 1/8 NPT* 341.75TC-847-U 2.00 3.14 60 800 1.8:1 to 4:1 450/750 16.00 4.34 4.88 — 2.25 1.78 1.25 .34 1/8 NPT* 341.75TC-858 2.50 4.90 200 4,000 2.3:1 to 4:1 900/1,600 18.09 7.12 4.88 — 3.84 2.75 4.25 .41 1/8 NPT* 436.66*Restrictor fittings are supplied that must be installed on clamp cylinder

TC-812

Smallest of hold-down models,this miniature clamp is the powerversion of TC-201. The 10-32spindle is adjustable for heightand location along the bar.Cylinder has built in speedcontrols for smooth operation.Clamp and base are stainlesssteel. Bar opens 90°. TC-812uses the TC-810156 reed switch.

A

D

P

F

H

G

J (Screw Size)E Spindle Size

TC-802-U

TC-802 provides 200 lbs. holdingcapacity in a package less than7” long. Threaded spindle isadjustable to accommodate workpiece height and is neoprenetipped for part protection. Doubleacting power cylinder has built-inspeed control (restriction) andneeds only to be hooked up to a

controlled air or hydraulic power source. Hold down bar opens95° to facilitate easy part loading/unloading. Clamps may not beexactly as pictured. Clamps may be provided with a new extrudedcylinder with no tie rods and with both ports at the back end.

TC-807

Two versions available. TC-807-Swith solid steel hold-down barand TC-807-U (illustrated) withU-bar. TC-807-S is furnished witha separate bolt retainer whichcan be welded onto the hold-

down bar (bar can be cut or modified). TC-807-U is furnished withflanged washers. A wide range of spindles are available to suityour application. Bar opens 92°.

TC-8021, 8071, 8101

Ideal for dirty environmentssuch as spot and MIG welding.Similar to TC-802, TC-807-Uand TC-810-U, except the inter-nal mechanism is totally

enclosed. Stationary cylinder allows hard piping. Low and narrowmounting profile. U-bar opens 90°. Comes with magnetic ring forsensing switches as a standard feature.

TC-810

Similar to Series 807 but largerand higher capacity. TC-810-Swith solid bar and TC-810-U withU-bar. Bar opens 95°.Accommodates any 3/8-16spindle assembly (not included).

Clamps may not be exactly as pictured. Clamps may be providedwith a new extruded cylinder with no tie rods and with both portsat the back end.

Series TC-846, 847

TC-846 is the pneumatic version of the TC-516. TC-847-S (solidbar) and TC-847-U have patented bar guide feature. Thisprovides additional side support to the hold-down bar and allowsa take-up adjustment to compensate for misalignment or wear.Other features are similar to preceding models. The hold-downbar opens 95°. Accommodates any 1/2-13 spindle assembly (notincluded).

TC-846

TC-847-U

TC-858

Heavy-duty model uses forgedalloy steel links and steel compo-nents machined to closetolerances. Base is a 1/2” thicksteel plate. All pivot points havehardened bushings fitted withhardened steel pivot pins. The 1”

x 1-3/8” steel hold-down bar may be cut, drilled, tapped or weldedto adapt to application. Bar opens 92°.

0139.qxd 2/17/2010 3:11 PM Page 139















Cla

mp

s an

d W

ork

ho

ldin

gPNEUMATIC HOLD-DOWN CLAMPS

Pneumatic cylinder provides the activating force for these over-center toggle clamps. Built to perform repetitive production operations.Portable and economical for use on short run jobs with temporary fixturing. By adding a sensing switch, the position of the cylinder canbe sensed. All these models come with magnetic ring for sensing capability. See page 147 for sensor options.


Series TC-817, 827, 868 - Right Angle

Used where space dictates such as rotary indexing tables and injection molding operations. Can also be used with the cylinder horizon-tal in which case the hold-down bar pulls back toward itself. All models can be mounted on the side of the fixture. TC-817-U andTC-817-S can also be top mounted. Clamps may not be exactly as pictured. Clamps may be provided with a new extruded cylinder withno tie rods and with both ports at the back end.

ED

CA

B

TC-827-U TC-868

ECONOMY PNEUMATIC HOLD-DOWN CLAMPSPneumaticHold-Down Clamp

Spindle assemblies are supplied.

C

H B

A

D

ØJ

K

E G

Cat. No. A B C D E G H J KHolding

Cap. Lbs.PortSize

SpindleSize

PriceEach

ETC-17018 3.04 12.75 1.41 0.74 1.25 2.28 2.83 0.28 2.05 375 1/8 NPT 5/16-18 X 2.50 Bonded 92.22ETC-17101 3.69 15.43 1.74 1.25 1.78 4.00 3.74 0.33 2.31 600 1/8 NPT 3/8-16 X 3.50 Bonded 150.20

PneumaticHold-Down Clamp

Spindle assemblies are supplied.

A

E

K

G

ØJ

F

D H

C

L

B

Cat. No. A B C D E F G H J K LHolding

Cap. Lbs.PortSize

SpindleSize

PriceEach

ETC-17171 10.28 7.63 2.80 0.63 1.03 0.63 2.28 2.47 0.25 2.13 0.64 350 1/8 NPT 5/16-18 X 2.50 Bonded 104.42ETC-17271 9.50 9.21 3.93 1.25 1.75 1.25 4.00 3.41 0.33 2.31 0.75 600 1/8 NPT 3/8-16 X 3.50 Bonded 162.58

ExertingForce

80 psi (Lbs.)Cyl.Bore

Cyl. AreaSq. In.

Max. Inlet Press.at Max. MA psig

Max.Hldg.Cap. (Lbs.)

MechanicalAdvantage

PortSize

PriceEachCat. No. A B C D E

TC-817-U 1.125 .994 80 350 2.5:1 to 4.4:1 200/320 7.42 .63 2.44 6.18 2.41 1/8 NPT 139.68TC-817-S 1.125 .994 100 450 2.5:1 to 4.4:1 200/400 7.42 .63 3.06 6.75 2.41 1/8 NPT 139.68TC-827-U 1.500 1.767 95 600 2:1 to 3.5:1 300/500 9.66 .75 3.26 8.75 2.94 1/8 NPT* 232.25TC-827-S 1.500 1.767 110 700 2:1 to 3.5:1 300/500 9.66 .75 3.19 8.64 2.94 1/8 NPT* 232.25TC-868 2.500 4.903 200 4,000 2.3:1 to 4:1 900/1,600 14.32 1.25 4.69 10.11 4.00 1/8 NPT* 502.03*Restrictor fittings are supplied that must be installed on clamp cylinder

0140.qxd 2/23/2010 1:28 PM Page 140












Clam

ps an

d W

orkh

old

ingPNEUMATIC STRAIGHT-LINE ACTION CLAMPS

Magnetic ring cylinders are used when there is a need to sense the open or closed position of the cylinder. By adding a sensing switch, theposition of the cylinder can be sensed. All these models come with magnetic ring for sensing capability. See page 147 for sensor options.


LTravel

ThreadE

D P

A

FM

JJ

H hD

G

CylinderArea

(Sq. In.)

Max. Cyl.Air Pressure

psi

MaximumHolding

Cap. (Lbs.)

MaxMechanicalAdvantage

Exert. Forceat 80 psi

(Lbs.)Cylinder

BorePortSize

PriceEachCat. No. P A D E F G H h J L M

TC-816 .75 .44 60 200 5.5:1 190 6.22 1.58 1.28 8-32 .56 .63 .63 — #8 .44 .25 10-32NF 105.35TC-803 1.13 .99 80 600 7.5:1 600 9.82 2.88 2.19 5/16-18 1.09 1.31 1.44 — .19 .75 .44 1/8NPT 154.44TC-830 1.50 1.77 145 2,500 5.7:1 800 14.08 3.25 2.00 3/8-16 1.06 1.63 1.38 1.63 .31 1.25 .63 1/8NPT* 256.64TC-850 2.50 4.90 125 16,000 5.2:1 2,050 21.17 7.50 4.50 5/8-11 2.63 2.25 2.75 — .38 2.00 1.00 1/8NPT* 467.26

*Restrictor fittings supplied that must be installed on clamp cylinder

TC-816 - Miniature

This miniature straight-line clamp is the power version of TC-601.The double-acting cylinder has built in speed controls for smoothoperation. TC-816 is ideal for applications calling for small sizeand remote or automated control. TC-816 uses the TC-810156reed switch.

TC-803 - Compact

This compact plunger action clamp is less than 10” long butprovides a holding capacity of up to 600 lbs. The 7/16” diameterplunger extends 3/4” to a locked position. The end of the plungeris drilled and tapped for a 5/16-18 spindle. Also available as afully enclosed clamp (TC-8031).

TC-830

The 5/8” dia. plunger travels forward 1-1/4” from an open to aclosed and locked position. Plunger is drilled and tapped toaccept a 3/8-16 spindle or to receive your custom fixture. TC-830is also available as special order in an alternate configuration asTC-830-10 which locks in the retracted position only and has aplunger travel of 3/4”. Please call for price and delivery.

TC-850 - Large

The largest of the straight-line actions, this model has a full 1”dia. plunger that extends 2” and goes into a mechanical lock. A3/8” thick steel base provides rigidity and can be welded or boltedinto position. Snap ring construction permits easy removal of theplunger without demounting the entire unit.

TC-8031 - Fully Enclosed

TC-8031 is the fully enclosed version of TC-803. It can be used in the harshest environments. Cylinder is sensor ready and the clampcan be hard piped.

HoldingCapacity

PlungerTravel

PlungerThread

PortSize

PriceEachCat. No. A B C D E F G H J

TC-8031 2,000 Lbs. .75 5/16 - 18 2.37 7.83 .037 2.17 2.36 .44 2.75 1.25 .27 1/8 NPT 404.86

0141.qxd 2/17/2010 3:12 PM Page 141









Cla

mp

s an

d W

ork

ho

ldin

gPNEUMATIC HEAVY DUTY CLAMPS


Toggle-LockTC-840, 841

Designed for high production applications, these pneumatic clamps offer exceptional clamping forces and holding capabilities.Does not require greater pressure to open than to close.The TC-840 and TC-841 have oval cylinders which allows them to be used in close quarters or they can be ganged together in multiple installations. The even numbered models feature a 180°clamping arm which travels to an over-center locked position parallel (180°) to the clamps center line. The corresponding odd numbered models have a 90° arm. The angular locked position of both versions is precisely controlled by the hardened steel insert. The magnetic ring cylinders are used when there is a need to sense the open or closed position of the cylinder. Then by adding a tie rod mounted reed switch, the position of the cylinder can be sensed. See page 147 for sensor options.

Note: Maximum inlet pressure: 150 psig.

Max. Exert.Force

@ 80 psig2” from

Pivot Point

Hold Cap.@ 3” fromPivot to

Load Point

MechanicalAdvantage

2” fromPivot Point

Range of Arm

PriceEachCat. No. Bore A B C D E F G H J K L M N O

TC-840 1.5 Equiv. .375 1.375 10 .625 100° 1.812 .28 .875 — 3.69 1.875 2.563 1.000 — 180° 1,500 475 3:1 616.78TC-841 1.5 Equiv. .375 1.375 10 .625 100° 1.812 .28 .875 3.25 — 1.875 2.563 1.000 5.47 90° 1,500 475 3:1 616.78

TC-860, 861, 890, 891,1001A

Designed for high production applications, these pneumaticclamps offer exceptional clamping forces and holding capabilities.Does not require greater pressure to open than to close. Theeven numbered models feature a 180° clamping arm whichtravels to an over-center locked position parallel (180°) to theclamps center line. The corresponding odd numbered modelshave a 90° arm. The angular locked position of both versions isprecisely controlled by the hardened steel insert. The magneticring cylinders are used when there is a need to sense the openor closed position of the cylinder. Then by adding a tie rodmounted reed switch, the position of the cylinder can be sensed.See page 147 for sensor options.

Max. Exert.Force

@ 80 psig2” from

Pivot Point

Hold Cap.@ 3” fromPivot to

Load Point

MechanicalAdvantage

2” fromPivot Point

Range of Arm

PriceEachCat. No. Bore A B C D E F G H J K L M N O

TC-860 2.00 .375 1.75 11.63 .625 96° 2.50 .34 1.130 — 4.50 2.188 2.500 2.313 — 180° 3,000 1,250 5:1 536.37TC-861 2.00 .375 1.75 12.25 .625 110° 2.50 .34 1.130 4.00 — 2.188 2.500 2.313 6.47 90° 3,000 1,250 5:1 536.37TC-890 2.50 .375 2.00 13.00 .690 96° 3.06 .41 1.250 — 5.50 2.500 3.560 2.760 — 180° 5,000 2,600 6.5:1 635.06TC-891 2.50 .375 2.00 13.63 .690 119° 3.06 .41 1.250 5.00 — 2.500 3.560 2.760 8.06 90° 5,000 2,600 6.5:1 635.06TC-1001A 3.25 .500 2.63 17.88 1.000 122° 3.75 .53 1.750 7.00 — 3.500 3.750 3.500 11.31 90° 10,000 6,000 9:1 965.74

Power RollerTC-870, 871

These models use a roller and cam principle to enable clamping work of inconsistent thickness whilestill maintaining a locked condition. Modular units 2-1/8” square can stack together for minimumdistance between clamping points. Four-way mounting surface for full mounting flexibility. Built-in pre-stop eliminates need to bottom out cylinder. Gives extra travel to automatically compensate for wear.Also permits arm to be machined accurately relative to mounting surface. TC-870-2 maximumopening is 112°, cylinder stroke is 2-3/8”. TC-871-2 maximum opening is 126°, cylinder stroke is 2-7/8”. The magnetic ring cylinders are used when there is a need to sense the open or closedposition of the cylinder. By adding a tie rod mounted reed switch, the position of the cylinder can besensed. All these models come with magnetic ring for sensing capability. See page 147 for sensoroptions.

67/8 Max. (871)63/8 Max. (870)

33/8Typ. for Screws (4) Slots

13/4

31/8

TC-871

111/2141/4

TC-870

21/8

25/32

1/4

3/4

9/32

1/4

5/8 3/8

21/8

1

NPT NPT

1/4

TC-870-2 TC-871-2

Max. CylinderAir Pressure

psig

Max. HoldCapacity

(Lbs.)

ExertingForce

80 psig (Lbs.)Cat. No.Cyl.Bore

Cyl. AreaSq. In.

MechanicalAdvantage Price Each

TC-870-2 1.5 1.767 250 psig 2,000 1.2 to 2.5:1 170/350 435.25TC-871-2 1.5 1.767 250 psig 2,000 1.2 to 2.5 170/350 435.25

0142.qxd 2/17/2010 3:12 PM Page 142

http://www.reidsupply.com/Detail.aspx?itm=TC-1001A










Clam

ps an

d W

orkh

old

ing

PNEUMATIC HEAVY DUTY TOGGLE-LOCK CLAMPSFully Enclosed Side Arm ClampsSeries 863, 864, 893, 894

T

893-L

893-D893-R

C

N

H

B

F

E

S

A

D1

D

JJ1

J

M

R

P

Q

G

118° Arm Opening

Pivot Point

Designed for use in hostile welding and machining environments. Linkage is completely enclosed to keep contaminants out. Clamp armis offset and can be mounted on left side, right side or both sides of the clamp. Over center toggle lock design for maximum reliabilityand clamping forces. Mounting surfaces allow blade mounting on either side of the clamps. Clamp arms are indexable and can berepositioned in 45° increments. Clamp arm is weldable/machinable to suit any application. Magnetic ring sensing options available. Themagnetic ring cylinders are used when there is a need to sense the open or closed position of the cylinder. Then by adding a tie rodmounted reed switch, the position of the cylinder can be sensed. All these models come with magnetic ring for sensing capability. Seepage 147 for sensor options.

863-L

863-R

863-DC

NH

FD

E

A

J

J1

M

R

P

J

J1 Q

G

BPivot Point

130° Arm Opening

U

TC-864-D TC-863-D TC-863, 864 TC-893, 894

Arm Style

Arm Opening

NPTA

PriceEachCat. No. B C D D1 E F G H J J1 M N P Q R S T U

TC-863-D 90 Dual 130 3/8 (2) 2.50 13.58 1.77 - 4.31 1.61 .75 1.00 .37 (2) 3/8-16 (4) 3.64 1.31 3.44 2.24 5 - - 1.77 760.13TC-863-L 90 LH 130 3/8 (2) 2.50 13.58 1.77 - 4.31 1.61 .75 1.00 .37 (2) 3/8-16 (4) 3.64 1.31 3.44 2.24 5 - - 1.77 698.32TC-863-R 90 RH 130 3/8 (2) 2.50 13.58 1.77 - 4.31 1.61 .75 1.00 .37 (2) 3/8-16 (4) 3.64 1.31 3.44 2.24 5 - - 1.77 698.32TC-864-D 180 Dual 121 3/8 (2) 2.50 13.58 1.77 - 4.31 1.61 .75 1.00 .37 (2) 3/8-16 (4) 3.64 1.31 3.44 2.24 5 - - 1.77 760.13TC-864-L 180 LH 121 3/8 (2) 2.50 13.58 1.77 - 4.31 1.61 .75 1.00 .37 (2) 3/8-16 (4) 3.64 1.31 3.44 2.24 5 - - 1.77 698.32TC-864-R 180 RH 121 3/8 (2) 2.50 13.58 1.77 - 4.31 1.61 .75 1.00 .37 (2) 3/8-16 (4) 3.64 1.31 3.44 2.24 5 - - 1.77 698.32TC-893-D 90 Dual 118 3/8 (2) 3.48 14.60 1.38 .69 4.86 3.00 1.00 1.00 .37 (2) 3/8-16 (8) 3.22 1.50 4.12 1.61 5 1.74 1.01 2.50 766.92TC-893-L 90 LH 118 3/8 (2) 3.48 14.60 1.38 .69 4.86 3.00 1.00 1.00 .37 (2) 3/8-16 (8) 3.22 1.50 4.12 1.61 5 1.74 1.01 2.50 690.48TC-893-R 90 RH 118 3/8 (2) 3.48 14.60 1.38 .69 4.86 3.00 1.00 1.00 .37 (2) 3/8-16 (8) 3.22 1.50 4.12 1.61 5 1.74 1.01 2.50 690.48TC-894-D 180 Dual 118 3/8 (2) 3.48 14.60 1.38 .69 4.86 3.00 1.00 1.00 .37 (2) 3/8-16 (8) 3.22 1.50 4.12 1.61 5 1.74 1.01 2.50 766.92TC-894-L 180 LH 118 3/8 (2) 3.48 14.60 1.38 .69 4.86 3.00 1.00 1.00 .37 (2) 3/8-16 (8) 3.22 1.50 4.12 1.61 5 1.74 1.01 2.50 690.48TC-894-R 180 RH 118 3/8 (2) 3.48 14.60 1.38 .69 4.86 3.00 1.00 1.00 .37 (2) 3/8-16 (8) 3.22 1.50 4.12 1.61 5 1.74 1.01 2.50 690.48

Cat. No. Formula to Calculate Exerting ForceTC-863 Max. Clamp Arm = 30 x Line Pressure (psi)TC-864 Exerting Force (lbs.) Distance from Pivot Point to Clamping Point (in.)

Cat. No. Formula to Calculate Exerting ForceTC-893 Max. Clamp Arm = 40 x Line Pressure (psi)TC-894 Exerting Force (lbs.) Distance from Pivot Point to Clamping Point (in.)

Series TC-800, 1200

Operates on an ordinary shop line air (properly filtered and lubricated). Clamp arm completely retracts from the work area for ease inpart loading/unloading. Model 800E and 1200E have extended arm. Min. operating pressure is 70 psig.

Note: Use with pneumatic power only. 3-Way air valve required to power unit (single-acting, spring return).

G F

D

E C

M

B

HN

L

A A1/2

3/16

5/16

P K

J

I

K

J

I

Clamping Arm TC-800, 1200 TC-800E, 1200E

Mtg.Holes

InputPressure

ExertingForce

PriceEachCat. No. A B C D E F G H I J K L M N P

TC-800 1.63 4.81 2.72 .25 2.21 .25 3.13 1.19 .59 .19 .50 1/4 NPT 2.31 1.50 — .26 70-150 850 - 1,500 646.78TC-800-E 1.63 4.81 2.72 .25 2.21 .25 3.13 1.19 .59 .16 .50 1/4 NPT 2.31 1.50 .50 .26 70-150 650 - 1,200 646.78TC-1200 2.25 6.00 3.00 .28 2.44 .28 4.25 1.50 .63 .25 100 1/4 NPT 3.00 1.38 — .26 70-150 750 - 1,600 667.23TC-1200-E 2.25 6.00 3.00 .28 2.44 .28 4.25 1.50 .63 .38 1.00 1/4 NPT 3.00 1.38 .69 .26 70-150 550 - 1,200 667.23

TC-801 - Low Profile

Retracted Extended Clamped

Completely enclosed unit makes it useful in heavy machining applications. Low and narrowprofile for use in confined areas. Clamping arm action extends out horizontally, then clampsdown. The double acting cylinder has built in restriction to help control the speed of thecylinder. Can be adapted with larger cylinder for greater exerting force. The clamp comeswith a magnetic ring cylinder which is used when there is a need to sense the open orclosed position of the cylinder. By adding a sensor the position of the cylinder can besensed. See page 147 and 147 for sensor options.

*Magnetic ring

M

E

DNH J (4 Holes)

BK L

F Gcadb

C

A

PortSize

PriceEachCat. No. A B C D E F G H J K L M N

TC-801 1.62 8.42 1.62 1.50 1.32 5.37 2.84 1.00 #10 5.06 3.36 .50 1.38 1/8 NPT 391.02

Clamping Arm Configurationa b c d

Retracted .50 .13 .38 —Extended .50 .13 1.00 .85Clamped .50 .13 1.00 .65

Exerting Force w/ 1 1/8” Dia. CylinderAir/psig Standard Arm Extended Arm

40 45 lbs. 38 lbs.50 67 lbs. 57 lbs.60 98 lbs. 77 lbs.70 125 lbs. 94 lbs.80 164 lbs. 114 lbs.90 192 lbs. 129 lbs.100 216 lbs. 147 lbs.110 238 lbs. 165 lbs.

PNEUMATIC RETRACTOR CLAMPS

0143.qxd 2/17/2010 3:12 PM Page 143

http://www.reidsupply.com/Detail.aspx?itm=TC-1200-E

http://www.reidsupply.com/Detail.aspx?itm=TC-863-D












http://www.reidsupply.com/Detail.aspx?itm=TC-800-E







ALL NEW PRODUCT


Cla

mp

s an

d W

ork

ho

ldin

g

AUTOMATION POWER CLAMPS

Miniature DesignSeries TC-81L

Opening Angle

Opening Angle

Area of Interference

Pivot

Right Hand: T-slot for sensorLeft Hand: Round slot for sensor

Powered with compressed air max. 6 BarOperation with oil-free air is permissible

B1

B10

L7

L6

81**-101

B10

B7

L9

D3(8x)L1

B18

81L**-141

B11b

B11a

Cat No.Holding Torque

Max (In-lbs.)Clamping Torque

Max (In-lbs.) D3 B1 B7 B10 B11a B11b B18 L1 L6 L7 L9 Price EachHorizontalTC-81L12-10100 221 39 M4X6 24 15 9 27 31.5 28 104 4.5 15 9 331.53TC-81L16-10100 531 53 M5X5 30 20 15 30 39.5 30 119 5.75 20 12 360.55TC-81L20-10100 885 57 M6X8 35 20 20 30.5 40 40 151 9 25 15 419.32TC-81L25-10100 885 159 M6X8 35 20 20 40.5 50 40 151 9 25 15 419.32VerticalTC-81L12-14100 177 39 M4X6 24 15 9 27 31.5 28 104 4.5 15 9 331.53TC-81L16-14100 354 57 M5X5 30 20 15 30 39.5 30 119 5.75 20 12 360.55TC-81L20-14100 708 150 M6X8 35 20 20 30.5 40 40 151 9 25 15 419.32TC-81L25-14100 708 150 M6X8 35 20 20 40.5 50 40 151 9 25 15 419.32

Without Hand LeverSeries TC-82L

L8a

L1 MAXB7a

(L9a)

B23 MAX

L9

B7

Cat No.Max. HoldingTorque (lbs.) B7 B7a B23 L1 L8a L9 Price Each

Without SensorTC-82L2G-2030000 55 25 - 53 179.5 - 18 382.00TC-82L3G-2030000 132 20 3 60 211 42 20 413.70TC-82L4G-2030000 280 25 35 74 242 50 20 429.10With SensorTC-82L2G-203B800 55 25 - 53 179.5 - 18 516.10TC-82L3G-203B800 132 20 3 60 211 42 20 547.80TC-82L4G-203B800 280 25 35 74 242 50 20 563.20

With Hand LeverSeries TC-82L

L1 MAX

L9

B7

B23

Clamping, holding, gripping and positioning of metal sheets andother parts in jigs and handling systems. Features compactdesign, long life cycle, high holding torques, two mounting areas(front and rear), and toggle action mechanism. These modelscan be quickly fitted with magnetic position sensors. Horizontalclamping arms have 120° standard opening angle and the verti-cal clamping arms have 90° standard opening angle. See page147 for sensors.

• Lightweight aluminum design• Enclosed model• Contaminant resistant• Compact design• High holding torques• Long life cycle

• Lightweight aluminum design• Enclosed model• Contaminant resistant• Compact design• High holding torques• Long life cycle

Cat No.Max. Hold.

Torque(Lbs.)Opening

AngleAir

Connection B7 B23 L1 L9PriceEach

Without SensorTC-82L2G-20300H0 55 105° 1/8 25 53 179.5 18 539.70TC-82L3G-20300H0 132 105° 1/8 20 60 211 20 483.20TC-82L4G-20300H0 280 105° 1/4 25 74 242 20 587.80With SensorTC-82L2G-203B8H0 55 105° 1/8 25 53 179.5 18 673.80TC-82L3G-203B8H0 132 105° 1/8 20 60 211 20 617.30TC-82L4G-203B8H0 280 105° 1/4 25 74 242 20 721.90

0144.qxd 2/17/2010 3:12 PM Page 144

http://www.reidsupply.com/Detail.aspx?itm=TC-82L2G-2030000



http://www.reidsupply.com/Detail.aspx?itm=TC-82L2G-203B800



http://www.reidsupply.com/Detail.aspx?itm=TC-82L2G-20300H0



http://www.reidsupply.com/Detail.aspx?itm=TC-82L2G-203B8H0



http://www.reidsupply.com/Detail.aspx?itm=TC-81L12-10100









Clam

ps an

d W

orkh

old

ing

PNEUMATIC SWING CYLINDER CLAMPS AND ACCESSORIESSwing and Straight Line Cylinders with Standard Sensing Feature

90° swing of clamping arm minimizes obstruction in the work space and makes loading and unloading of parts easy. Ideal for installa-tions where hydraulic power is not suitable. Straight line clamps operate in only straight line or vertical clamping strokes. These doubleacting clamps are intended for quick clamping in secondary manufacturing operations. Made of aluminum, red anodized, with either athreaded body that permits three mounting options, or a block style mounting body. Available with or without arm. Separate arm optionsavailable. See page 145. TC-8015, 8016, 8115 and 8116 are supplied with a 10-32 hex head steel spindle (TC-305203). TC-8415 and8416 are supplied with a 3/8-16 hex head spindle assembly (TC-485203-AL) and neoprene cap (TC-235110). TC-8215, 8216, 8315 and8316 are supplied with a 3/8-16 hex head aluminum spindle (TC-485203-AL). Standard sensing feature allows user to determine whenthe clamps are fully open and fully closed. To sense the opened and closed positions, optional small low voltage hall effect switches canbe installed in a groove machined into the side of the cylinder body. The switches are actuated by a magnetic piston ring as the cylinderpiston moves up and down. The open or closed condition of the switches is then read by a programmable logic controller (PLC) or otherelectronic device. Optional sensing switches available. See page 147. Swing Cylinder Rotation: Frame of reference for specifyingrotation is the clamp arm viewed from above during the clamping stroke. A right-hand unit rotates clockwise and then clamps down; aleft-hand unit rotates counter-clockwise, and then clamps down. The straight line cylinders offer only vertical clamping strokes. The armsdo not swing. Straight line cylinders supplied without arm and without spindle assembly. See page 147 for sensor options.


Series TC-8000, 8200, 8400 - Threaded Body with or without Arm

F

EUnclampPort

ClampPort

A

B

C

D Thread

Mounting blocks available for threaded body style. See page 145.Series TC-8200 Series TC-8000, 8400-LA

Exerting Force@

80 psiw/Standard Arm

w/ ArmCat. No.

w/o ArmCat. No.

Rot.Trvl.

VerticalClampStroke

PortSize

Price EachSwing A B C D E F G H w/ Arm w/o Arm

TC-8015 TC-8015-LA RH .466 .38 22 4.88 2.87 .62 11/8-16 1.25 — — — 10-32 264.81 247.28TC-8016 TC-8016-LA LH .466 .38 22 4.88 2.87 .62 11/8-16 1.25 — — — 10-32 264.81 247.28TC-8215 TC-8215-LA RH .75 .50 80 6.36 3.36 .87 21/4-12 3.00 1.16 .25 2.66 1/8 NPT 350.41 315.53TC-8216 TC-8216-LA LH .75 .50 80 6.36 3.36 .87 21/4-12 3.00 1.16 .25 2.66 1/8 NPT 350.41 315.53TC-8415 TC-8415-LA RH .75 .50 62 6.14 3.17 .88 13/4-12 2.13 .98 — — 1/8 NPT 318.77 290.11TC-8416 TC-8416-LA LH .75 .50 62 6.14 3.17 .88 13/4-12 2.13 .98 — — 1/8 NPT 318.77 290.11

Series TC-8100 - Block Style - Standard Sensing Feature - with or without ArmSeries TC-8300

Series TC-8100 Series TC-8300-LA

Vert.ClampStroke

Exerting Force@

80 psiw/Standard Arm

w/ ArmCat. No.

w/o ArmCat. No.

Rot.Trav.

PortSize

Price EachSwing A B C D E F G H J K L M N P Q R w/ Arm w/o Arm

TC-8115 TC-8115-LA RH .466 .38 22 4.88 3.50 1.25 1.25 .62 .47 .47 1.00 1.12 1.00 .25 1.00 1.57 .35 .20 #10 10-32 252.91 235.96TC-8116 TC-8116-LA LH .466 .38 22 4.88 3.50 1.25 1.25 .62 .47 .47 1.00 1.12 1.00 .25 1.00 1.57 .35 .20 #10 10-32 252.91 234.96TC-8315 TC-8315-LA RH .75 .50 80 6.36 4.27 3.00 2.00 1.00 .72 1.22 2.25 .53 2.37 .44 2.25 1.016 .65 .40 .313 1/8 NPT 340.78 303.14TC-8316 TC-8316-LA LH .75 .50 80 6.36 4.27 3.00 2.00 1.00 .72 1.22 2.25 .53 2.37 .44 2.25 1.016 .65 .40 .313 1/8 NPT 340.78 303.14

L-ArmsSeries TC-80152, 82151, 841512

A F

B

E

CD

Use w/Series No.

PriceEachCat. No. A B C D E F

TC-801528 8000, 8100 1.75 1.12 .39 .27 .62 10-32 20.12TC-801529 8000, 8100 2.87 2.25 .39 .27 .62 10-32 20.12TC-821512 8200, 8300 2.75 2.00 .75 .37 .75 3/8-16 24.20TC-821513 8200, 8300 3.75 3.00 .75 .37 .75 3/8-16 31.42TC-841512 8400 2.31 1.58 .75 .37 .75 3/8-16 31.26

T-ArmsSeries TC-80153, 80155

A

FBB

E

C D

Use w/Series No.


TC-801530 8000, 8100 2.87 1.12 (2) .39 .27 (2) .62 10-32 (2) 28.39TC-801531 8000, 8100 5.12 2.25 (2) .39 .27 (2) .62 10-32 (2) 28.39TC-821554 8200, 8300, 8400 4.75 2.00 (2) .75 .37 (2) .75 3/8-16 (2) 35.06TC-821555 8200, 8300, 8400 6.75 3.00 (2) .75 .37 (2) .75 3/8-16 (2) 35.06

Blank ArmsTC-801532, 821556

E

FAB

D

G

C

Use w/Series No.

PriceEachCat. No. A B C D E F G

TC-801532 8000, 8100 1.37 1.00 .39 .25 .62 10-32 (2) .62 21.33TC-821556 8200, 8300, 8400 1.50 1.06 .75 .37 .75 1/4-20 (2) .75 37.10

Mounting BlocksTC-801553, 821553, 841550


TC-801553 1.38 .69 1.08 .54 .20 11/8-16 35.11TC-841550 2.00 1.00 1.60 .80 .28 13/4-12 36.05TC-821553 2.50 1.25 2.12 1.06 .27 21/4-12 37.43

0145.qxd 2/17/2010 3:13 PM Page 145

http://www.reidsupply.com/Detail.aspx?itm=TC-8015-LA


































ALL NEW PRODUCT


Cla

mp

s an

d W

ork

ho

ldin

g

PNEUMATIC SWING CLAMPS AND ACCESSORIESSeries TC-9500

J

(CLAMP STROKE)K

N (PORTS)

BA

DE

90°±5°

Clamp ArmsFor Series TC-9500

B B

A

CD

F

D C

A

BF

E

TC-954054

Series TC-89R

l6l5

l3

l1

M3

M3

Rotation Range90° ±5°right

Rotation range 90°±5°(standard adjustment)

h3

Clamp ArmsFor Series TC-89R

b

h h1

l

l1l2

M1

Cat No. I I1 I2 h h1 M1 b Price EachTC-8JG-215-1 67 52 7 15 27.8 M6 15 35.15TC-8JG-217-1 80 60 10 20 35.7 M8 20 38.90TC-8JG-218-1 95 70 10 25 40 M8 25 41.72TC-8JG-219-1 106 80 10 30 48.4 M8 30 47.91TC-8JG-220-1 120 90 12 35 53 M10 35 54.67

Cat No.ClampForce A B D E J K N Price Each

TC-9522R 45 36 25 — — 150.7 13 M5 282.80TC-9522L 45 36 25 — — 150.7 13 M5 282.80TC-9530R 61 44.7 34 12.7 5.1 167.3 20 1/8NPT 315.70TC-9530L 61 44.7 34 12.7 5.1 167.3 20 1/8NPT 315.70TC-9540R 105 52 40 16 9 176.2 20 1/8NPT 338.25TC-9540L 105 52 40 16 9 176.2 20 1/8NPT 338.25

Innovative design allows clamp arm to swing 90° in a horizontalplane at the top of the stroke before traveling down through theclamping stroke. There is no linear travel during rotation. Pistonrod is fully shielded throughout the stroke. Clamps are sensorready built-in sensor tracks. Clamp arms are ordered separately.Clamp forces shown are at 80psi with shortest standard arm. Seepage 147 for sensors.

Standard arms for the TC-9500 series pneumatic swing clampsare made from aluminum and are mounted in 90° increments tothe piston rod.

Swing clamp arms are madefrom aluminum and may bepositioned radially 360°.

• TC-8JG-215-1 used withTC-89R20-010-1


• TC-8JG-218-1 used withTC-89R40-010-1 andTC-89R40-025-1


• TC-8JG220-1 used withTC-89R63-025-1

L-Arm

T-Arm

Cat. No.Use With

Series A B C D E F Price EachL-ArmsTC-954050 9540, 9530 70 50 20 10 20 M8X1.25 24.15TC-954053 9540, 9530 100 80 20 10 20 M8X1.25 31.35TC-952250 9522 58 45 15 7.5 15 M6x1.0 22.15TC-952253 9522 78 65 15 7.5 15 M6X1.0 28.30T-ArmsTC-954054 9540, 9530 120 50 20 10 20 M8X1.25 35.04TC-954055 9540, 9530 180 80 20 10 20 M8X1.25 35.04TC-952254 9522 103 45 15 7.5 15 M6X1.0 30.55TC-952255 9522 143 65 15 7.5 15 M6X1.0 30.55

TC-954050

Easily adjustable swing directions, left hand, right hand,straight pull (TC-89R20-010-1 not adjustable). Simple, doubleacting cylinder will produce several million cycles. Clamps aresensor ready built-in sensor tracks for 4mm round diameter or6.5mm x 5mm T-slot style sensors. Clamp arms are orderedseparately. See page 147 for sensors.

Cat No.Total

Stroke

TravelDuring

Rotation

VerticalClampStroke

ExertingForce At

80 psi h3 I1 I3 I5 I6 M3 Price EachTC-89R20-010-1 21 11 10 20 105.5 39.5 22 22 32 M5 227.37TC-89R32-010-1 28 18 10 62 125 60 36 32 45 G1/8 252.63TC-89R40-010-1 31.5 21.5 10 94 140 66 40 40 54.5 G1/8 282.61TC-89R40-025-1 46.5 21.5 25 94 170 66 40 40 54.5 G1/8 294.95TC-89R50-025-1 52 27 25 154 194.5 78.5 50 50 65 G1/8 341.67TC-89R63-025-1 58.5 33.5 25 242 211.5 95 62 62 80 G1/4 401.85

0146.qxd 2/17/2010 3:13 PM Page 146

http://www.reidsupply.com/Detail.aspx?itm=TC-89R20-010-1






http://www.reidsupply.com/Detail.aspx?itm=TC-8JG-215-1













http://www.reidsupply.com/Detail.aspx?itm=TC-9522R

http://www.reidsupply.com/Detail.aspx?itm=TC-9522L






Clam

ps an

d W

orkh

old

ing

Switching Logic Normally openOperating Voltage 528 VDCSwitching Current 50 mA Max.

Power Rating1.5 Watts Warning:Never exceed rating (Watt = Voltagex Amperage) or permanent damage to sensor willoccur.

Leakage Current 0.01 mA Max.

CableRobotic grade, abrasion resistant polyurethane(PUR) jacket, PVC insulation

Operating Frequency 1000 Hz

Magnetic Requirement50 Gauss parallel14° to 158° F (-10° to +70°C)

Enclosure Classification IP 67 (NEMA 6)Protection Circuit Reverse polarity, surge suppression

PNEUMATIC CLAMP ACCESSORIESSensing SwitchesSeries TC-8215-SO

These switches are optional and can be used with all series pneumatic swing and straight line cylinders. WARNING: Reverse wiringwill destroy solid state electronic components. Presence of external magnetic/electromagnetic field may interfere with theoperation of the sensor.

TC-8315w/ Sensor

TC-8215-SO-25Sensing Switch

TC-8215-SO-27Sensing Switch

Output CurrentSourcing

VoltageDrop

Current Consumption

LEDIndicator

LeadLgth.

PriceEachCat. No.

TC-8215-SO-25 PNP 1.2V@25mA max. 9 mA@24 VDC max. Green 3 Meters 45.60TC-8215-SO-26 NPN .5V@25mA max. 7 mA@24 VDC max. Red 3 Meters 45.60TC-8215-SO-27 PNP 1.2V@25mA max. 9 mA@24 VDC max. Green 6" w/ Pigtail Connector 47.50TC-8215-SO-28 NPN .5V@25mA max. 7 mA@24 VDC max. Red 6" w/ Pigtail Connector 47.50

Sensing SwitchesNew Style

Tie Rod04mmCat. No. Mount Operation Operating Voltage Switching Current Voltage Drop Cord Type Price EachTC-810165 Tie Rod TRIAC 24-240V AC

50/60Hz Only4 AmpsMax-25

Amplnrush1.5V @.05A Max. 3 meters 64.66

TC-810172 Tie Rod TRIAC 24-240V AC50/60Hz Only

4 AmpsMax-25Amplnrush

1.5V @.05A Max. 6" Male M8 Connector 66.78

TC-810166 Ø4mm PNP 4.5-28V DC 100mA Max. .5V @50mA Max. 3 Meters 48.34TC-810167 Ø4mm NPN 4.5-28V DC 100mA Max. .5V @50mA Max. 3 Meters 48.34TC-810173 Ø4mm PNP 4.5-28V DC 100mA Max. .5V @50mA Max. 6" Male M8 Connector 50.35TC-810174 Ø4mm NPN 4.5-28V DC 100mA Max. .5V @50mA Max. 6" Male M8 Connector 50.35TC-810159 Ø4mm SPST 5-120V DC/AC 50/6 50mA Max. 3.0V Max. 3 Meters 48.34TC-810169 Ø4mm SPST 5-120V DC/AC 50/6 50mA Max. 3.0V Max. 6" Male M8 Connector 50.35

SENSOR OPTIONSSeries TC-81015

Switches are activated by a magnetic ring installed on cylinder piston. As the magnetic ring moves under the switch, it closes thecontacts and sends a signal to a programmable controller or other electronic device. All switches have a 9 foot lead except for theTC-810152 which has a 12 foot lead. Longer leads are available as special order. Please call for price and delivery. Switches comewith tie-rod mounting clamp as standard. Minimum gauge rating required for proper operation, as measured on sensor surfaces, is85 GA.

Note: TC-810156 and TC-810158 use a band to mount the switch to the wall of the cylinder. All other models use tie rod clamp clip.

B

A

C

Switch Mounted on Power Clamp(Power Clamp Not Included)

Switch w/ Mounting Clamp

Switch Dimensionsw/o Mounting Clamp

Cat. No. A B C Type FunctionSwitching

VoltageSwitchingCurrent

SwitchingPower

Max. VoltageDrop

PriceEach

TC-810151 .37 .93 .53 Reed, LED, MOV - w/Tie Rod Clip SPST - Normally Open 5-120V AC/DC50/60 HZ

0.5 Amp. Max.0.005 Amp. Min.

10 3.5 Volts 98.24

TC-810152 .37 .93 .53 Reed, LED, MOV - w/Tie Rod Clip SPST - Normally Open 5-120V AC/DC50/60 HZ

0.5 Amp. Max.0.005 Amp. Min.

10 3.5 Volts 117.81

TC-810154 .37 .93 .53 Reed, LED, MOV - w/Tie Rod Clip SPST -Normally Open 0-120V AC/DC50/60 HZ

0.5 Amp. Max. 10 0 Volts 98.24

TC-810155 .37 .93 .53 Hall Effect, LED Sourcing - w/ Tie Rod Clip Normally Open - PNP Output 6-24V DC 0.5 Amp. Max. 12 1 Volt 108.95TC-810156 .37 .93 .53 Reed, LED, MOV SPST - Normally Open 5-120V AC/DC

50/60 HZ0.5 Amp. Max.

0.005 Amp. Min.10 3.5 Volts 98.24

TC-810157 .37 .93 .53 Hall Effect - with Tie Rod Clip Normally Open - NPN Output 6-24V DC 0.5 Amp. Max. 12 1 Volt 108.95TC-810158 .37 .93 .53 Hall Effect Normally Open - PNP Output 6-24V DC 0.5 Amp. Max. 12 1 Volt 108.95

Heavy Duty Switch

Cable: Robotic Grade, abrasion resistant polyurethane (PUR) jacket, PVC insulationTemperature Range: 14 to 158°F (-10 to +70°C)Switching Logic: Normally Open

SwitchType

SwitchingVoltage

SwitchingCurrent

Switching PowerWatts Max.

VoltageDrop

PriceEachCat. No. A B C Function

TC-810153 .87 1.30 .67 ReedLED, MOV

NormallyOpen

24-240V AC50/60 HZ

4 Amp. Max.50 Amp. In Rush.005 Amp. Min.

100 1 Volt 146.25

0147.qxd 2/22/2010 2:57 PM Page 147

http://www.reidsupply.com/Detail.aspx?itm=TC-8215-SO-25




























Cla

mp

s an

d W

ork

ho

ldin

gHYDRAULIC POWER WORKHOLDING

Threaded Body Cylinders

Features:• Stainless steel pistons won’t “mushroom” even when used without grippers• Variety of sizes that support precise fixture designs• Springs are designed to return the cylinder and contact points, not intended to pull mechanisms• SAE fluid ports are common to all models• Operating Pressure - 150 to 5,000 psi

Single-acting (spring return) and double-acting threaded cylinders are extremely versatile and durable. They can be designed into avariety of high production applications including workpiece positioning, holding and ejecting applications where space is at a premium.Double-acting cylinders assure complete powered-retraction for CNC controlled operations (where time is critical) or when using heavyend effectors. Double-acting models are also suited to manufacturing applications, such as production punching. Single-acting cylindersshould be used with small end effectors only and where retraction speed is not critical.

Single ActingCat. No.

Double ActingCat. No.

S/Act.A

D/Act.A B C C1 D D1 E F G K L M P S T

— TBC-DA-2220 — 3.444 2.814 2.494 0.625 1.750-16 1.564 0.437 1.375 SAE#4 1/4-20 0.422 0.39 0.2 0.375 0.500TBC-SA-2220 TBC-DA-2215 4.064 5.184 3.684 3.664 0.625 1.750-16 1.564 0.437 1.375 SAE#4 1/4-20 0.422 0.39 0.2 0.375 0.500TBC-SA-3900 TBC-DA-3900 3.465 3.985 3.195 2.875 0.625 1.875-16 1.73 0.625 1.61 SAE#4 5/16-24 0.53 0.39 0.2 0.500 0.625TBC-SA-3906 TBC-DA-3902 5.005 6.405 4.405 4.085 0.625 1.875-16 1.73 0.625 1.61 SAE#4 5/16/24 0.53 0.39 0.2 0.500 0.625TBC-SA-8800 TBC-DA-8800 3.917 4.62 3.62 3.125 0.69 2.500-16 2.375 1 2.25 SAE#4 1/2-13 0.8 0.55 0.375 0.835 0.625TBC-SA-8805 TBC-DA-8802 5.067 6.62 4.62 4.125 0.69 2.500-16 2.35 1 2.25 SAE#4 1/2-13 0.8 0.55 0.375 0.835 0.625

Single-Acting Threaded Cylinders

Cat. No.Force at 5kpsi. Push

BoreSize Rod Stroke

Effec. AreaPush

Oil Cap.Push Price Each

TBC-SA-2220 2,220 0.75 0.437 0.38 0.442 0.168 160.04TBC-SA-3900 3,900 1 0.625 0.27 0.785 0.212 159.53TBC-SA-3906 3,900 1 0.625 0.6 0.785 0.471 192.35TBC-SA-8800 8,800 1.5 1 0.297 1.767 0.525 206.18TBC-SA-8805 8,800 1.5 1 0.447 1.767 0.789 245.29

Double-Acting Threaded Cylinders

Force at 5k psi. Bore Effective Area Oil CapacityCat. No. Push Pull Size Rod Stroke Push Pull Push Pull Price EachTBC-DA-2220 2,220 1,400 0.75 0.437 0.63 0.442 0.292 0.279 0.184 143.54TBC-DA-2215 2,220 1,400 0.75 0.437 1.5 0.442 0.292 0.663 0.438 160.60TBC-DA-3900 3,900 2,390 1 0.625 0.79 0.785 0.478 0.62 0.378 149.02TBC-DA-3902 3,900 2,390 1 0.625 2 0.785 0.478 1.57 0.956 176.92TBC-DA-8800 8,800 4,900 1.5 1 1 1.767 0.982 1.767 0.982 196.38TBC-DA-8802 8,800 4,900 1.5 1 2 1.767 0.982 3.534 1.964 228.37

Threaded Cylinders

Single-acting with spring return action, these cylinders can be used singly or combined byusing a common manifold. Easily mounted. Can be used in any attitude and requires only asingle inlet port. Threaded cylinders can be directly inserted into a fixture or used with mount-ing blocks. Locknuts, mounting blocks and end caps are available. Call for price and delivery.The 1-5/16” through 2-1/2” diameters are furnished with a radial port as well as axial.

BDA

C

F(HEX SIZE)

E(PORT SIZE)

Lbs. Force@ 3,000

psig

OilDisplaceCu. In.Cat. No. Thread Stroke A B C D

SAEE F

PriceEach

TC-010-210-400 1/2-20 .219 279 1.66 1.41 .15 .16 #2 .44 .024 84.70TC-010-210-501 3/4-16 .313 588 2.25 1.97 .22 .28 #4 .62 .061 92.40TC-010-210-702 1-12 .500 1,326 2.56 2.31 .24 .31 #4 .75 .221 98.18TC-010-211-002 15/16-16 .500 2,355 2.63 2.25 .64 1.25 #4 1.00 .393 118.85TC-010-211-004 15/16-16 1.000 2,355 3.63 3.25 .64 1.25 #4 1.00 .785 137.49TC-010-211-502 17/8-16 .500 5,301 2.94 2.57 1.00 1.75 #4 1.50 .884 156.30TC-010-212-004 21/2-16 1.000 9,423 4.13 3.76 1.50 2.38 #4 2.00 3.142 240.82

0148.qxd 2/17/2010 3:14 PM Page 148

http://www.reidsupply.com/Detail.aspx?itm=TC-010-210-400







http://www.reidsupply.com/Detail.aspx?itm=TBC-DA-2220

http://www.reidsupply.com/Detail.aspx?itm=TBC-SA-2220






















Clam

ps an

d W

orkh

old

ing

HYDRAULIC POWER WORKHOLDING

Features:• Advanced seals and wipers utilize a special, highly wear-resistant construction for long cycle life

and 5,000 psi operation• Triple track piston rod design for field adjustable swing direction• Hardened and hard chrome plated piston rod for increased strength and wear resistance• Advanced metal treated body for superior wear and corrosion resistance• MRO interchange design• Straight pull capacity 600 lbs. at 5,000 psi max (TBSC-SA-475, TBSC-DA-475, TBSC-DA-475-R)• Straight pull capacity 1,400 lbs. at 5,000 psi max (TBSC-SA-1100, TBSC-SA-1100-R, TBSC-DA-1100, TBSC-DA-1100-R)• Straight pull capacity 3,150 lbs. at 5,000 psi max (TBSC-SA-2400, TBSC-SA-2400-R, TBSC-DA-2400, TBSC-DA-2400-R)

The premium threaded body swing/pull clampsare available in both single-acting and double-acting versions. They incorporate the latesthydraulic swing clamp technology. The top portdesign allows easy access for plumbingconnections. They are available with 90 degreeleft or right hand rotation, or with guidedstraight pull. The breather port on single-actingmodels may be replaced with tubing for remoteventing. The optional arms clamp securely tothe piston rod to reduce fatigue and deflection.Arms may be easily modified or custom armsmay be substituted.

Cat. No.

TotalStroke

AClamping

Stroke CClamp

DUnclamp

E F G H J K L M N P Q R S T UTBSC-SA-475 0.65 0.21 0.59 SAE-2 SAE-2 1.929 2.086 3.07 4.429 0.8 M6x1 0.157 0.393 11/8-16UN 4.96 0.495 1.3 1.55 0.61TBSC-SA-475-R 0.65 0.21 0.59 SAE-2 SAE-2 1.929 2.086 3.07 4.429 0.8 M6x1 0.157 0.393 11/8-16UN 4.96 0.495 1.3 1.55 0.61TBSC-DA-475 0.65 0.32 0.59 SAE-2 SAE-2 1.929 2.086 3.07 4.429 0.8 M6x1 0.157 0.393 11/8-16UN 4.96 0.495 1.3 1.55 0.61TBSC-DA-475-R 0.65 0.32 0.59 SAE-2 SAE-2 1.929 2.086 3.07 4.429 0.8 M6x1 0.157 0.393 11/8-16UN 4.96 0.495 1.3 1.55 0.61TBSC-SA-1100 0.89 0.39 0.6 SAE-4 SAE-4 2.4 2.6 3.58 5.31 0.94 M8x1.25 0.196 0.629 13/8-18UN 5.965 0.40 1.5 1.87 0.75TBSC-SA-1100-R 0.89 0.39 0.6 SAE-4 SAE-4 2.4 2.6 3.58 5.31 0.94 M8x1.25 0.196 0.629 13/8-18UN 5.965 0.40 1.5 1.87 0.75TBSC-DA-1100 0.89 0.39 0.6 SAE-4 SAE-4 2.4 2.6 3.58 5.31 0.94 M8x1.25 0.196 0.629 13/8-18UN 5.965 0.40 1.5 1.87 0.75TBSC-DA-1100-R 0.89 0.39 0.6 SAE-4 SAE-4 2.4 2.6 3.58 5.31 0.94 M8x1.25 0.196 0.629 13/8-18UN 5.965 0.40 1.5 1.87 0.75TBSC-SA-2400 1.12 0.5 0.62 SAE-4 SAE-4 3.18 3.38 4.38 6.8 1.28 M10x1.5 0.196 0.87 17/8-16UN 7.543 0.517 2 2.38 1TBSC-SA-2400-R 1.12 0.5 0.62 SAE-4 SAE-4 3.18 3.38 4.38 6.8 1.28 M10x1.5 0.196 0.87 17/8-16UN 7.543 0.517 2 2.38 1TBSC-DA-2400 1.12 0.5 0.62 SAE-4 SAE-4 3.18 3.38 4.38 6.8 1.28 M10x1.5 0.196 0.87 17/8-16UN 7.543 0.517 2 2.38 1TBSC-DA-2400-R 1.12 0.5 0.62 SAE-4 SAE-4 3.18 3.38 4.38 6.8 1.28 M10x1.5 0.196 0.87 17/8-16UN 7.543 0.517 2 2.38 1

Threaded Body Swing/Pull Clamps

TU

S 50

D Port

25

E Port

L

QJ

HG F

M

CN

P

K

AB

R

TBSC-SA-475 TBSC-SA-2400 TBSC-SA-475-R

Cat. No. Swing Operation ForceEffective Area

ClampSq. InchUnclamp

Oil CapacityClamp

Cu. Inch.Unclamp

Max Oil FlowIn 3/m In Price Each

TBSC-SA-475 LH Single-acting 475 0.12 — 0.08 — 12 311.44TBSC-SA-475-R RH Single-acting 475 0.12 0.24 0.08 0.15 12 311.44TBSC-DA-475 LH Double-acting 475 12 — 0.08 — 12 311.44TBSC-DA-475-R RH Double-acting 475 12 0.24 0.08 0.15 12 311.44TBSC-SA-1100 LH Single-acting 1100 0.28 — 0.25 — 25 337.40TBSC-SA-1100-R RH Single-acting 1100 0.28 0.59 0.25 0.52 25 337.40TBSC-DA-1100 LH Double-acting 1100 0.28 — 0.25 — 25 337.40TBSC-DA-1100-R RH Double-acting 1100 0.28 0.59 0.25 0.52 25 337.40TBSC-SA-2400 LH Single-acting 2400 0.63 — 0.7 — 100 394.12TBSC-SA-2400-R RH Single-acting 2400 0.63 1.23 0.7 1.4 100 394.12TBSC-DA-2400 LH Double-acting 2400 0.63 — 0.7 — 100 412.89TBSC-DA-2400-R RH Double-acting 2400 0.63 1.23 0.7 1.4 100 412.89

Swing/Pull Clamp Arms

Custom built arms of any length must clamp to the swing/pull clamp’s piston rodin a manner similar to the arms or some derating of the clamp will be necessary.IMPORTANT: Any clamp using a modified or custom arm that is longer or heavierthan standard arms must be derated to prevent internal damage.

• Do not exceed the maximum speed and pressure ratings for standard arms.• Do not use meter-out circuitry for controlling double-acting clamp speeds.Cat. No. A B C D G H I J K L M N O P Q T U Price EachHSCA-S-475 1.929 0.709 M6 0.63 0.126 1.139 0.394 0.63 0.236 0.217 0.394 0.394 0.256 0.984 M6 0.236 1.22 34.74HSCA-L-475 3.959 0.709 — 0.63 0.126 1.166 0.394 0.63 0.236 0.217 0.394 0.394 0.256 — M6 — 3.25 49.31HSCA-S-1100 2.598 0.709 M8 0.748 0.126 1.294 0.433 0.748 0.236 0.217 0.63 0.472 0.335 1.575 M6 0.315 1.889 40.89HSCA-L-1100 6.019 0.709 — 0.748 0.126 1.412 0.433 0.748 0.236 0.217 0.63 0.472 0.335 — M6 — 5.31 60.13HSCA-S-2400 3.268 0.866 M10 1 0.126 1.459 0.63 1 0.236 0.217 0.866 0.709 0.413 1.969 M8 0.433 2.402 50.50HSCA-L-2400 7.226 0.866 — 1 0.126 1.696 0.63 1 0.236 0.217 0.866 0.709 0.413 — M8 — 6.36 79.37

Flange Mounting Brackets

Flange mounting brackets allow you to secure your swing/pullclamps in two ways. You may use the set screw and nylon threadprotector ball (supplied) or simply lock the clamp using anoptional jam nut. Swing clamps may also be screwed into athreaded hole and locked in position with a jam nut.

Note: Includes locking set screw and nylon ball to protect clamp threads.

A E

B

CB4X D

A

F

I I I I I I I I I I IIIIIIIIIIIIIIIIIIIIIIIIII

IIII

III I

I II I I

I I I I I I I

Cat. No. A B C D E F Price EachTC-FM475 1.5 1.12 11/8-16 0.219 0.5 10-24 58.21TC-FM1100 1.75 1.34 13/8-18 0.272 0.5 10-24 58.21TC-FM2400 2.25 1.77 17/8-16 0.328 1 1/4-20 55.44

Jam Nuts

Cat. No. A B C D E Price EachTC-JN475 1.75 11/8-16 0.685 0.128 0.256 23.16TC-JN1100 1.88 13/8-18 0.82 0.125 0.25 27.60TC-JN2400 2.5 17/8-16 1.06 0.187 0.374 27.60TC-JN5000 3.38 25/8-20 1.5 0.187 0.374 30.67

0149.qxd 2/17/2010 3:14 PM Page 149

http://www.reidsupply.com/Detail.aspx?itm=TBSC-SA-1100-R

http://www.reidsupply.com/Detail.aspx?itm=TBSC-DA-1100-R











http://www.reidsupply.com/Detail.aspx?itm=TBSC-SA-1100

http://www.reidsupply.com/Detail.aspx?itm=TBSC-DA-1100











http://www.reidsupply.com/Detail.aspx?itm=TC-FM1100


http://www.reidsupply.com/Detail.aspx?itm=TC-JN1100





http://www.reidsupply.com/Detail.aspx?itm=S-1100

http://www.reidsupply.com/Detail.aspx?itm=S-475

http://www.reidsupply.com/Detail.aspx?itm=HSCA-S-1100

http://www.reidsupply.com/Detail.aspx?itm=HSCA-L-1100






Cla

mp

s an

d W

ork

ho

ldin


Block Cylinders

Features:• Stainless-steel plunger for long-lasting performance• Variety of strokes to meet specific design needs• SAE oil ports• No special mounting hardware required• Operating Pressure - 150 to 5,000 psi

Double-acting block cylinders are designed for punching,pressing, riveting and bending applications. These blockcylinders require no special mounting hardware and can bedual-position mounted (parallel or perpendicular) to pistontravel on every model.

Double-Acting Block Cylinders

BHC-DA-2220

Force at 5k psi. Bore Effective Area Oil CapacityCat. No. Push Pull Size Rod Stroke Push Pull Push Pull Price EachBHC-DA-2220 2,220 1,400 0.75 0.437 0.63 0.442 0.292 0.279 0.184 209.21BHC-DA-2215 2,220 1,400 0.75 0.437 1.5 0.442 0.292 0.663 0.438 230.88BHC-DA-3900 3,900 2,390 1 0.625 0.79 0.785 0.478 0.62 0.378 247.26BHC-DA-3902 3,900 2,390 1 0.625 2 0.785 0.478 1.57 0.956 272.29BHC-DA-8800 8,800 4,900 1.5 1 1 1.767 0.982 1.767 0.982 291.50BHC-DA-8802 8,800 4,900 1.5 1 2 1.767 0.982 3.534 1.964 346.18

Hollow Cylinders

These hollow cylinders can be used to push or pull depending on the position of the ram. They will actuate a rod of any length or shapeand are extremely effective in translating power to a remote location. Larger piston diameter provides greater clamping force. Hardenedsteel piston and rod. Supplied with through hole insert threaded into the top. Optional thread inserts (inch/metric) are available asspecial order. An accessory adapter plate,which fastens to the ram base and permits mounting the ram with a single cap screw is alsoavailable as special order. Please call for price and delivery. Maximum input pressure is 3,500 psig.

B

A

C

Oil DisplacementCu. In.

Lbs. Force @3000 psig

PriceEachCat. No. ID* Port A B C Stroke

TC-021-011-011 .38 1/8 NPT 2.13 1.88 2.25 .375 .547 4,380 173.57TC-020-011-011 .38 #2 SAE 2.13 1.88 2.25 .375 .547 4.380 214.77TC-020-012-021 .50 #4 SAE 3.00 2.63 2.88 .500 1.35 8,100 260.02TC-020-013-031 .63 #4 SAE 3.25 3.00 3.63 .625 2.51 12,066 310.73*Clearance for rod or bolt

O

H

J

TLK

S

CB

A

DE

RK

MP

(S/S Vent Plug) G KV

F

G V

I

Double ActingCat. No.

S/Act.A

D/Act.A B C D E F G H I J K L M O P R S T V

BHC-DA-2220 — 3.078 2.448 2.128 2.36 0.375 0.437 SAE#4 0 0.756 1.206 0.295 1.77 0.98 1/4-20UNC 1.57 0.785 0.9 1.18 0.28BHC-DA-2215 3.698 4.818 3.318 2.998 2.36 0.375 0.437 SAE#4 2.058 0.756 1.248 0.295 1.77 0.98 1/4-20UNC 1.57 0.785 1.77 1.18 0.28BHC-DA-3900 3.031 3.551 2.761 2.441 2.559 0.5 0.625 SAE#4 0 0.788 1.378 0.295 1.969 1.181 5/16-24UNF 1.772 0.886 1.181 1.28 0.35BHC-DA-3902 4.571 5.971 3.971 3.651 2.559 0.5 0.625 SAE#4 2.558 0.788 1.378 0.295 1.969 1.181 5/16-24UNF 1.772 0.886 2.391 1.28 0.35BHC-DA-8800 3.472 4.175 3.175 2.68 3.15 0.835 1 SAE#4 0 0.708 1.42 0.374 2.403 1.548 1/2-13UNC 2.295 1.148 1.5 1.575 0.391BHC-DA-8802 4.622 6.175 4.175 3.68 3.15 0.835 1 SAE#4 2.62 0.708 1.44 0.374 2.403 1.548 1/2-13UNC 2.295 1.148 2.5 1.575 0.391

0150.qxd 2/17/2010 3:14 PM Page 150





http://www.reidsupply.com/Detail.aspx?itm=BHC-DA-2220













Clam

ps an

d W

orkh

old

ing

HYDRAULIC POWER WORKHOLDINGHydraulic Edge Clamp

For quick part load/unload in drilling, milling, planing, grinding andother surfacing operations on either CNC or Bridgeport-typemachines. Clamps are low profile and provide horizontal andvertical clamping force simultaneously against the sides of aworkpiece allowing cutter access to an entire top surface.Powered using shop air with an air/hydraulic booster. Positivespring return and replaceable grippers.

1.191.25

1.50

.27 (4) Holes .13 Clamping Range & Part Location

1/4-28 Tap-Removable

Standard Gripper

.50 Travel (Max.).19 Optimum

Clamping Range1/8 NPT

2.00

1.381.75

1.00

5.06 .88

Hydraulic Pressure Rangepsig

Vertical Travel @Horizontal

StrokeDisplacement

(In.3)Effective Area

(In.2)Horizontal

StrokePriceEachCat. No. Max Min

TC-70626 3,500 500 .139 .442 .31 .22 467.06

Hydraulic Clamp Force at 5/16" Hydraulic Clamp Force at 5/16"Pressure Horizontal Stroke (lbs.) Pressure Horizontal Stroke (lbs.)

psig Horizontal Vertical psig Horizontal Vertical500 190 170 2500 1060 8701000 390 350 3000 1300 10501500 620 520 3500 1520 12202000 850 700

Semi Automatic - Air / Hydraulic Boosters

Converts normal shop line air pressure to high pressure hydraulic power. With the system filled, the volume of oil required to actuate acylinder or pressure point is only equal to the cubic content of the piston displacement. Boosters have built in manifold and are made ofcorrosion and wear-resistant materials. Hydraulic piston tube has wear rings and the air piston is self centering for long life. Boostersoffer automatic relief of system overcharge as well as complete automatic bleeding with each return, eliminating prefilling. Large volumevisible oil reservoir automatically replenishes the system with available reserves. 100 psig max. input air pressure.

A

B

Nom. Displac.Per Stroke

Cu. In.

ReservoirCapacity

Cu. In.Pressure

RatioNPTPorts

PriceEachCat. No. A B

TC-70101 33.87 1 10.4 1/8 4.5 10.875 753.51TC-70104 32.41 4 42 1/4 6.5 16.375 1034.09

0151.qxd 2/17/2010 3:14 PM Page 151





Cla

mp

s an

d W

ork

ho

ldin


Swing Cylinders w/o ArmsLight Duty

Unclamp Port(S/A Vent Plug)

K

K

G Clamp Port

M

N

L

I

A

ClampedPosition

D

C

B

J

H

F

E

ArmNot

Included

AB

EF

H

R

J

C

D

I

BoltsIncluded

Arm NotIncluded

N

ML

K

P

QGUnclampPort(S/A VentPlug)

ManifoldPort (FixtureHole Dia. .19)

G ClampPort

Manifold Port(Fixture HoleDia. .19)

I

AB

E

F

JC

D

R

H

Bolts Included

Arm NotIncluded

L M

P N

Q

ManifoldPorts(FixtureHole Dia..19)

GUnclampPort(S/A Vent Plug)

G ClampPort

K

These swing cylinders rotate 90° as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can bechanged to left swing, right swing or pull applications by loosening the bottom plug. All single acting cylinders come with a retract springfor single-acting operations. Max. psi 5,000. Clamp arms not included but sold separately on page 155. Body styles available arethreaded with upper flange or non-threaded with lower or upper flange.

*All threaded bodies have upper flange

L

M

K

I

A

D

N

C

B

J

H

F

E

GClamp

Port

ArmNot

Included

GUnclamp Port

Upper Flange

Threaded VE-72VE-600-1, 605-1, 610-1

Lower Flange

VE-70, 73, 75 VE- 71, 74, 76

CylinderCapacity

w/Std. Arm

Hydraulic Oil Capacity

(In.3)BodyStyle

Stroke Effective Area (In.2)

PriceEachCat. No. Enerpac Total Clamping A B C D E F G H I J K L M N

Double ActingVE-70 SURD-51 Upper Flange 1,250 .89 .39 .28 .28 5.31 4.42 2.60 .98 1.82 1.08 SAE #4 .39 1.57 13/8-18 25° 1.12 .75 1.50 430.00VE-71 SLRD51 Lower Flange 1,250 .89 .39 .28 .28 5.31 4.42 2.60 .98 1.82 1.08 SAE #4 .39 1.57 13/8-18 25° 1.12 .75 1.50 398.00VE-72 STRD121 Threaded* 2,600 1.12 .50 .63 .70 6.75 5.63 3.38 1.00 2.25 1.06 SAE #4 .38 2.00 17/8-16 .81 1.38 1.00 2.00 398.00VE-73 SURD-121 Upper Flange 2,600 1.12 .50 .63 .70 6.75 5.63 3.38 1.00 2.25 1.06 SAE #4 .38 2.00 17/8-16 25° 1.38 1.00 2.00 491.00VE-74 SLRD121 Lower Flange 2,600 1.12 .50 .63 .70 6.75 5.63 3.38 1.00 2.25 1.06 SAE #4 .38 2.00 17/8-16 25° 1.38 1.00 2.00 469.00Single ActingVE-600-1 STRS21 Threaded* 475 .65 .32 .12 .08 4.41 3.76 2.09 .98 1.67 1.04 SAE #2 .39 .97 11/8-16 25° .94 .61 1.30 301.00VE-605-1 STRS51 Threaded* 1,100 .89 .39 .28 .28 5.31 4.42 2.60 .98 1.82 1.08 SAE #4 .39 1.57 13/8-18 25° 1.12 .75 1.50 325.00VE-75 SURS-51 Upper Flange 1,100 .89 .39 .28 .28 5.31 4.42 2.60 .98 1.82 1.08 SAE #4 .39 1.57 13/8-18 25° 1.12 .75 1.50 430.00VE-76 SLRS51 Lower Flange 1,100 .89 .39 .28 .28 5.31 4.42 2.60 .98 1.82 1.08 SAE #4 .39 1.57 13/8-18 25° 1.12 .75 1.50 398.00VE-610-1 STRS121 Threaded* 2,400 1.12 .50 .63 .70 6.75 5.63 3.38 1.00 2.25 1.06 SAE #4 .38 2.00 17/8-16 25° 1.38 1.00 2.00 398.00

Swing Cylinders With Arms P

ON

Q D

JR

S

G

FB

A

C

H

M

E

TLK

X

W

F

I

These swing cylinders rotate 90° as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can bechanged to left swing, right swing, or pull applications by loosening the side plug and then rotating the plunger to a desired position.The VE-354 and VE-352 have a retract spring for single-acting operations. The VE-360 is only for double-acting operation and has noreturn spring. Clamp arm provided. Can be mounted with the built-in flange by securing the swinger to the top or bottom of a toolingplate or by screwing the threaded body into a mounting bracket.

P

ON

QD

JR

S

G

FB

AC

H

M

E

TLK

X

W

VE-354VE-352, 360

Cat. No. Enerpac A B C D E F G H I J K L M N O P Q R S T W X Price EachVE-354 SC-1 7.37 8.88 5.74 3.00 2.87 1/4-18 1/8-27 3.31 .50 .38-16 .44 .88 17/8-16 1.88 1.28 2.90 2.06 2.00 .40 5.87 1/2-13 1.000 687.00VE-352 SC-3 4.26 5.27 3.48 2.13 2.03 1/8-27 1/8-27 2.15 — .250-20 .32 .63 1-12 1.13 .75 2.00 1.50 1.00 .20 3.71 5/16-24 .500 478.00VE-360 SC-4 3.13 4.30 2.50 1.62 1.40 5/16-27 5/16-27 1.44 — 10-32 .30 .60 3/4-16 .88 .60 1.52 1.13 .75 .20 2.83 5/16-24 .375 507.00*Standard clamping arm supplied. Longer arms indicated in chart can be fabricated by the user.

Cylinder Oil Max.Cylinder Capacity

@ Maxpsi (Lbs.)

Effective Capacity Max.Pressure

PSIArm

SwingCylinder

TypeHydraulic Stroke Retracted

HeightArea (In2) (In.3) Arm

Lgth.Cat. No. Enerpac Total Clamping Pull Push Pull Push

VE-354 SC-1 Straight, Leftor Right

Single or Double-acting,

Pull

2,640 2,164 1,960 1,740 1,200 840

1.50 1.50 1.50 1.50 1.50 1.50

.50

.50

.50

.50

.50

.50

7.37 7.37 7.37 7.37 7.37 7.37

.980

.980

.980

.980

.980

.980

1.767 1.767 1.767 1.767 1.767 1.767

1.470 1.470 1.470 1.470 1.470 1.470

2.650 2.650 2.6502.650 2.6502.650

None 2.00* 3.004.00 5.006.00

3,0003,0003,0003,0002,4002,000

VE-352 SC-3 Straight, Leftor Right

Single or Double-acting,

Pull

700500250

.75

.75

.75

.25

.25

.25

4.52 4.52 4.52

.245

.245

.245

.442

.442

.442

.184

.184

.184

.331

.331

.331

None 1.00* 2.00

3,0003,0002,000

VE-360 SC-4 Straight, Left or Right

Double-acting 300 25

.56

.56.19 .19

3.74 3.74

.137

.137.246 .246

.770

.770.138 .138

.75* 1.50

3,0001,500

0152.qxd 2/22/2010 11:10 AM Page 152

http://www.reidsupply.com/Detail.aspx?itm=VE-600-1



http://www.reidsupply.com/Detail.aspx?itm=VE-354













http://www.reidsupply.com/Detail.aspx?itm=SC-1







Clam

ps an

d W

orkh

old

ing

HYDRAULIC POWER WORKHOLDINGSingle-Acting Manifold Cylinder

C

AB

EF

HD

G

These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action forrapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used withstandard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See page 155 for accessories.

BA

C

G DFEH

VE-411, 412, 414 VE-413 thru 419, 82 thru 86 and 424, 425

Max.Clamp Force

Eff. Area(In.2).

Oil Cap.(In.3).Cat. No. Enerpac Stroke A B C D E F G H Price Each

VE-411 TS-271ST 380 .28 .08 .02 1.58 1.86 .97 .69 .19 6-32 7/16-20 1/2-20 75.00VE-412 TS-2131ST 380 .51 .08 .04 1.99 2.50 1.38 .69 .19 6-32 7/16-20 1/2-20 95.00VE-414 TS-3131ST 560 .51 .11 .06 2.15 2.66 1.52 .75 .19 6-32 7/16-20 5/8-18 97.00VE-413* TS-471ST 980 .28 .20 .05 1.87 2.15 1.71 .65 .27 8-32 7/16-20 3/4-16 80.00VE-416 TS-4131ST 980 .51 .20 .10 2.21 2.72 2.05 .65 .27 8-32 7/16-20 3/4-16 83.97VE-417 TS-4191ST 980 .75 .20 .15 2.62 3.37 2.46 .65 .27 8-32 7/16-20 3/4-16 91.00VE-418 TS-4251ST 980 .98 .20 .19 2.97 3.96 2.82 .65 .27 8-32 7/16-20 3/4-16 81.00VE-419 TS-4381ST 980 1.50 .20 .29 4.27 5.77 4.11 .65 .27 8-32 7/16-20 3/4-16 81.00VE-82 TS-971ST 1950 .28 .39 .11 2.25 2.53 2.03 .81 .39 1/4-28 7/16-20 1-12 83.00VE-83 TS-9131ST 1950 .51 .39 .20 2.50 3.01 2.28 .81 .39 1/4-28 7/16-20 1-12 110.00VE-84 TS-9191ST 1950 .75 .39 .29 3.11 3.86 2.89 .81 .39 1/4-28 7/16-20 1-12 92.00VE-85 TS-9251ST 1950 1.00 .39 .39 3.41 4.41 3.19 .81 .39 1/4-28 7/16-20 1-12 108.00VE-86 TS-9381ST 1950 1.50 .39 .59 4.11 5.61 3.89 .81 .39 1/4-28 7/16-20 1-12 125.00VE-424 TS-18131ST 3860 .51 .77 .40 2.76 3.27 2.50 1.22 .63 5/16-24 7/16-20 15/16-16 125.00VE-425 TS-18251ST 3860 .98 .77 .77 3.52 4.51 3.27 1.22 .63 5/16-24 7/16-20 15/16-16 140.00

*Nitro carburized

Threaded Cylinders

Cylinders can be fixtured into manual strapor bridge clamp assemblies. Fully threadedbodies allow cylinders to be threadeddirectly into tapped holes of the fixture foreasy installation. Available as single-actingspring return or double acting hydraulicreturn. The VE-90 can use carbide grippers(Grippers sold on page 170).VE-88 VE-90

Cylinder Capacity Cylinder Oil@ Max. psi Effective Capacity

(Lbs.) HydraulicStroke

Retr.Hgt.

BoreDia.

Area (In.3) Area (In.2) PriceEachCat. No. Enerpac Push Pull Push Pull Push Pull A B C D E F G H I J K L M

Single-ActingVE-88 WRT-21 3900 — .50 3.25 1.00 .79 — .39 — 3.25 3.75 2.33 1.23 .75 1/4-28 x .32 5/16-24 .62 .24 .30 .50 .25 13/8-18 180.00Double-ActingVE-90 WMT-39 3900 2700 .50 3.26 1.00 .79 .54 .39 .27 3.26 3.76 2.05 1.30 .56 1/4-28 x .39 1/8-27 NPT .73 — .27 — — 13/8-18 273.00

Hollow Cylinders

I

K 1/8-27 ManifoldPNT and NTP(except VE-347)

DJL

C

EF

H

A B

1/8-27 NPTThese hollow cylinders combine compactness with power andversatility. Any application requiring either a pushing or pullingaction is easily handled with this type of cylinder. The cylindersare threaded and can be placed over a bolt or a stud to upgrademost existing manual clamping fixtures.

VE-326, 327,355

VE-347, 349,350, 351

Eff. Area(In.2)

ClampPres.*

Oil Cap(In.3)

PriceEachCat. No. Enerpac A B C D E F H I J K L

VE-326 RWH-120 2.19 2.50 1.19 2.75 1.38 3/4-16 .39 5/16-18 .19 .770 23/4-16 2.76 27,600 .86 419.00VE-327 RWH-121 3.19 4.19 1.19 2.75 1.38 3/4-16 .53 5/16-18 .19 .770 23/4-16 2.76 27,600 2.76 551.00VE-355 RWH-20 2.06 2.38 1.50 1.79 1.00 .53 .28 1/4-20 .12 1/2-20 17/8-16 1.32 4,000 .41 245.00VE-347 CY1254-25 2.00 2.25 .91 1.75 .56 3/8-16 .29 1/4-20 1.75 .390 .86 .87 2,610 .22 260.00VE-350 CY2129-25 2.00 2.31 .75 2.63 1.13 3/4-10 .31 3/8-16 2.50 .765 .86 2.47 7,410 .77 301.00VE-349 CY2129-5 2.73 3.36 1.48 2.63 1.13 3/4-10 .31 3/8-16 2.50 .765 1.06 2.47 7,410 1.56 366.00VE-351 CY2754-5 3.00 3.63 1.55 3.50 1.25 7/8-9 .31 3/8-16 3.13 .890 1.50 4.44 13,320 2.80 443.00*Clamping pressure at 10,000 psi, except for VE-355 which is 3,000 psi

Clamping CylindersSingle-Acting

Used for a wide range of production tooling applications, heavy duty force requirements and high cycle applications. Block shapedclamps provide a high amount of force in a tight area. Designed to be surface mounted on the machine tool bed or on a fixture surface.Provide force in horizontal or vertical direction. Cylindrical clamps have collar threads and base holes for mounting. All have springreturn operation for easy unloading of workpiece and faster cycling. Spring is designed to return plunger only.

VE-372VE-373,377,378 VE-375

Cyl. Cap.@ Max

psi

Cyl. Eff.Area(In.2)

OilCap.(In.3)

Hyd.Stroke

Retrac.Hght.

BoreDia.

PriceEachCat. No. Enerpac A B C D E F G H I J K L M

VE-372 RW-50 9,940* .62 1.62 1.12 .994 .620 1.62 2.25 1.50 1.62 1.12 .22 3/8-18 1.00 .56 1.12 2.31 .75 — 209.00VE-373 RW-51 9,940* 1.00 4.12 1.12 .994 .994 4.37 5.37 4.12 11/2-16 1.00 1/4-20 3/8-18 .75 .12 1.12 — — 3/4-16 230.00VE-377 RW-53 9,940* 3.00 6.25 1.12 .994 3.20 6.50 9.50 6.25 11/2-16 1.00 1/4-20 3/8-18 .75 .12 1.12 — — 3/4-16 236.00VE-378 RW-55 9,940* 5.00 8.25 1.12 .994 5.20 8.50 13.50 8.25 11/2-16 1.00 1/4-20 3/8-18 .75 .12 1.12 — — 3/4-16 250.00VE-375 RW-102 22,300* 2.00 4.53 1.69 2.236 4.75 4.78 6.78 4.53 21/4-14 1.38 5/16-18 3/8-18 .75 .19 1.06 — — 1-8 274.00*Cylinder capacity shown is rated at 10,000 psi

0153.qxd 2/17/2010 3:15 PM Page 153
































Cla

mp

s an

d W

ork

ho

ldin

gWORK SUPPORTS

Work supports provide additional support to avoid excessive movement or deflection of the workpiece during machining. Whenhydraulic pressure is applied to the work support, a piston pushes against an internal adjustable spring that advances the work supportplunger against a workpiece at the force set by the adjustable spring. As more hydraulic pressure is applied, an internal sleeve will gripand lock the plunger in that position. Available as a spring or fluid advance unit. The spring advanced unit can be converted to air bysimply removing the internal adjustment spring and attaching a low pressure air line to the air breather vent tube. Operating pressure is700 psi minimum, 5,000 psi maximum.

Q

T

SRF

L

E

K

CONTACT BOLTINCLUDEDJ

BA C

H

SAE #4U

J1J1

.28

MI

AIR BREATHER/FILTER VENT1 8-27 NPT

N

D

AIR PORT

OPTIONAL MANIFOLD-MOUNT PORT(FIXTURE HOLE ¯.0.17)

U

Cap@ Max

psi

Support Plunger OilCap.(In.3)

Hyd.Stroke

Spring Force Lbs. PriceEachCat. No. Enerpac Extended Retracted A B C D E F H I J J1 K L M N Q R S T U

Fluid AdvancedVE-19 WFL-111 2,500 .38 3.4 5.2 .06 3.53 3.91 3.10 13/8-18 .63 .49 .56 1.08 .18 .57 M10x1.5 1.50 .70 .73 .28 1.62 2.38 .94 .17 240.00Spring AdvancedVE-21 WSL-111 2,500 .38 3.4 5.2 .02 2.97 3.35 2.54 13/8-18 .63 .49 .44 .94 .18 .57 M10x1.5 1.50 .30 .73 .28 1.62 2.38 .94 .17 207.00

Turbo Air/Hydraulic Pumps

A turbo air pump is recommended where input air pressure is limited. Engineered to recycle exhaust air to help power the pump.Maintains a tight pressure range for reliable clamping performance. Pump will automatically restart in the event of a pressure drop inthe hydraulic system. Mounting plate allows for horizontal or vertical machine-side mounting. Buna-N polyurethane and Teflon seals.

VE-391, VE-392Requires remote valve to complete system. Best

choice for multiple remote valve applications.

VE-4604 way tandem center valve can operatesingle to double-acting cylinders. Best

choice for continuous hookup to cylinder.

Hydraulic PressureAIr

Consump.SCFM

AIrPressureRange psi

Usable OilRange psi Hydraulic

Air RatioHydraulic

Output Ports.Capacity (In.3) Price

EachCat. No. Enerpac Min. Max. Vertical HorizontalVE-391 PACG-5002SB 2,500 5,000 72:1 SAE #4 15 40-120 70 127 646.00VE-392 PACG-3002SB 1,400 5,000 50:1 SAE #4 15 40-120 70 127 712.00VE-460 PAMG-5402NB 2,500 5,000 72:1 3/8-18 15 40-120 70 127 1051.00

0154.qxd 2/17/2010 3:15 PM Page 154










Clam

ps an

d W

orkh

old

ing

HYDRAULIC POWER WORKHOLDING

Clamping Arms

CA

B

G

E

D

KL

FH

I O

MJ

N

P

These clamp arms are designed for use with the swing cylinders shown on page 152. Clamp arms can be positioned and tight-ened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger.Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length.

ABC

DE

G

Q

O

K

F

L

H

IP

JM

N

Short Arm Long Arm

For Use WithCylinder Cap.Cat. No. Enerpac A B C D E F G H I J K L M N O P Q Price

Short ArmVE-600-2 CAS-21 500 1.60 .97 .38 .76 .38 .13 .25-28 .68 .466 .394 .63 .28 .37 .40 .25-20 14° .50 41.00VE-605-2 CAS-51 1,250 2.39 1.57 .50 1.00 .50 .17 .312-24 1.02 .728 .630 .75 .31 .51 .45 .312-18 12° .63 44.00VE-610-2 CAS-121 2,600 3.13 2.00 .70 1.39 .69 .28 .375-24 1.40 1.000 .875 1.19 .44 .66 .63 .375-16 18° .82 53.00Long ArmVE-14 CAL-22 500 3.63 .44 .38 .76 .38 .13 M6x1 .68 .466 .394 .63 .28 .37 .40 .92 14° — 52.00VE-15 CAL-52 1,250 5.81 .55 .50 1.00 .50 .17 M8x1 1.02 .728 .630 .75 .31 .51 .45 1.37 12° — 63.00VE-16 CAL-122 2,600 7.06 .72 .70 1.39 .69 .28 M10x1.5 1.40 1.000 .875 1.19 .44 .66 .63 1.73 18° — 83.00VE-17 CAL-202 3,900 7.95 1.00 .95 1.90 .95 .20 M12x1.25 2.59 1.400 1.259 1.18 .47 .94 .82 1.11 18° — 97.00

Jam Nuts

C

A

BD

E

Cat. No. Enerpac A B C D E Price EachVE-387 JN-48 1.88 15/16-16 .25 .25 .12 30.50VE-307 JN-12 2.50 17/8-16 .50 .38 .19 34.00

Sequence Valves For Time Interval Control

These valves can be plumbed to provide a sequence of clampingfunctions from just one hydraulic power source. Sequenced locat-ing, clamping, and/or supporting functions can be controlled in alogical order by plumbing one sequence valve to each clampinggroup requiring a different time interval. The valve can be presetto different pressure values, allowing fluid flow in sequence as thehydraulic pressure increases in the entire system to whatever thepower source provides, after all valves are open. These valvesare basically timers, not pressure controllers. The VE-211features a lock nut which secures the hydraulic pressure settingfor the secondary circuit and a tamper proof cover can be placedover the set screw. Maximum operating pressure is 5,000 psi.

VE-211

VE-210

Cat. No. Enerpac Pressure Setting Range (psi) Price EachVE-210 V-2000 200 to 2,000 319.00VE-211 WVP-5 500 to 5,000 406.00

Hydraulic Oil

Cat. No. Enerpac Description Price EachVE-255 HF-101 Hydraulic Oil (gallon) 42.50

0155.qxd 3/2/2010 2:36 PM Page 155














Cla

mp

s an

d W

ork

ho

ldin

gCLAMPING SYSTEMS

Fixture Clamps

The Mitee-Bite™ clamping system combines strength, versatilityand performance with economy and ease of use. Consisting of acam action socket cap screw with a brass hex washer, set upsare simplified even for hard to hold parts. Its small size allowsmore parts per load on multiple series jobs. The low profile makesprogramming easier because there are no clamps to jump over.Fast to use (just 1/4 turn of screw loosens clamp) and no looseparts to set up each time. Economical— all six sides of the hexnut can be used. Available in six sizes for use on multiple partfixtures. Metric sizes are in millimeters. MB-10203 and MB-50207are stainless steel.

PRODUCTS INC.


Cat. No.ScrewSize

ThreadLgth.

HexSize

HexHt.

Max.Holding

Force Lbs.Total

Throw

No. ofClampsPer Pkg.

PricePer Pkg.

1-24InchMB-2 8-32 .350 .312 .110 205 .030 10 50.70MB-3 10-32 .340 .500 .160 350 .040 10 53.35MB-4 1/4-20 .470 .625 .190 800 .040 10 53.35MB-10203* 1/4-20 .470 .625 .190 — .040 4 57.45MB-5 5/16-24 .460 .812 .190 750 .040 12 66.85MB-5C 5/16-18 .460 .812 .190 750 .040 12 66.85MB-6 3/8-16 .710 .812 .250 2,000 .050 10 61.50MB-8 1/2-13 .900 1.000 .375 4,000 .100 8 66.85MetricMB-50204 M4 9.6 7.93 2.80 93 .76 10 50.70MB-50206 M6 11.2 15.86 4.75 364 1.01 10 53.35MB-50208 M8 15.0 20.61 4.75 340 1.01 12 66.85MB-50207* M8 15.0 20.60 6.35 — 1.01 4 76.95MB-50210 M10 19.0 20.61 6.35 910 1.52 10 61.50MB-50212 M12 22.8 25.38 9.52 1,818 2.03 8 66.85MB-50216 M16 28.5 30.13 12.69 2,720 2.54 4 50.70*Stainless steel

Multi-Fixture Clamps and Stops

Works in plates with tapped hole layouts or T-slot configurationsproviding flexible set ups for hard to hold parts. Can be mountedvertically or horizontally. Stops locate workpiece for repeatpositioning. Tapered mounting slots prevents movement whenclamping pressure is applied. Closed slot.

PRODUCTS INC.


Clamp Stop

MountingPriceEach

Cat. No. Description A B C F G Screws 1-24MB-150 Clamp 3.75 1.12 .62 1.68 .50 1/2 54.55MB-200 Stop 3.75 1.12 .87 1.68 .50 1/2 49.40

Uniforce® Clamps

Compact and economical, uniforce clamps enable you to fixturemore parts on the machine table. The specially designed steelwedge spreads the clamping force uniformly on both sides of thealuminum channel. Minimizes tool changes. Ideal for clamping flator round work pieces. Order one piece and you will receive onepackage.

PRODUCTS INC.


A

C

D

E

BF

Machinable Uniforce Clamps

The compact clamp is available with extra material on the clamp-ing jaws so it can be machined to conform to the shape of yourwork piece, enabling you to fixture unusual applications easily.The specially designed steel wedge spreads the clamping forceuniformly on both sides of the aluminum channel. A uniquelocking plate is provided to make the clamp rigid while machiningthe jaws to your specifications. Order one piece and you willreceive one complete assembly with mounting screws and lockingplate.

PRODUCTS INC.


Cat. No. A* B C D E F** G H I

PriceEach1-24

MB-250 1.125 .50 .62 .42 .25 .18 .400 2-56 8-32 21.25MB-750 1.50 .75 .94 .64 .38 .28 .625 6-32 1/4-20 22.50MB-1000 2.00 1.00 1.25 .82 .50 .38 .810 6-32 5/16-18 31.05MB-1500 3.00 1.50 1.87 1.87 .75 .62 1.20 10-32 1/2-13 86.15

*A is the distance needed between work pieces for clamp clearance,drill and tap mounting holes on the center of the A dimension.**F dimension is the amount of machinable stock.

Holding No. PriceThread Max Force Per Each

Cat. No. A B C D* E F** Size Spread Lbs. Pack 1-24MB-6025 .240 .250 .320 .210 .140 .250 2-56 .260 200 6 62.75MB-6037 .360 .375 .470 .310 .185 .375 4-40 .390 310 6 62.75MB-6050 .485 .500 .625 .410 .220 .500 8-32 .530 500 8 62.75MB-6075 .735 .750 .940 .635 .375 .750 1/4-20 .785 1,500 6 63.90MB-6100 .980 1.000 1.250 .820 .500 1.000 5/16-18 1.050 2,000 4 62.75MB-6150 1.470 1.500 1.875 1.215 .750 1.500 1/2-13 1.560 3,500 2 104.50

*A shallow slot a little wider than D dimension will insure clamp remainsin line with workpiece.**F is the distance needed between workpieces for clamp clearance.Drill and tap mounting hole on the center of F dimension.

0156.qxd 2/23/2010 12:49 PM Page 156

http://www.reidsupply.com/Detail.aspx?itm=MB-10203




















http://www.reidsupply.com/Detail.aspx?itm=MB-5C








Clam

ps an

d W

orkh

old

ing

CLAMPING SYSTEMSSide-Loc Xpansion Clamps

H

G

E

H

F

C

AB

D

The side-loc xpansion clamp is an ideal way to clamp on the I.D.when the part has a blind bore. It is actuated by turning a sockethead cam on the side, which moves a tapered plunger to expandthe clamp. The side-loc xpansion clamp is designed in two styles,one for milling operations and one for lathe applications.Presently one size is available for each model. The mill side-locxpansion clamp can be machined from 1.120 to .710 and thelathe version from 2.09 to .710. The lathe version has a straightmounting shank of 1”.

Note: Six mounting screws included.

PRODUCTS INC.


A

C B

F

D

H

G

EMB-31210 MB-31370

Cat. No. A B C D E F G HHex Key

SizeHolding

Force Lbs.

PriceEach1-24

MB-31210 1.625 .875 .69 0.75 1.968 1.13 0.71 8-32 on 1.550 BHC M6 4,000 92.70MB-31370 1.750 1.00 .84 0.75 2.10 2.10 0.71 1.0 M6 4,000 136.00

Machinable Pitbull® Clamps

This new Pitbull® fixture clamp is a machinable version of thepopular Pitbull® clamp. The clamp has positive down force and avery low gripping profile. The machinable Pitbull® clamp is madeof tool steel and heat treated to about 43 Rc for long life, yet stillmachinable. There is additional material on the clamping face toallow for machining a radius. A dowel pin is included in eachpackage to locate the clamp during the machining process.

PRODUCTS INC.


DA

B

C

E

Cat. No. Description A B C D* EClampWidth

ScrewSize

Max. HoldingForce Lbs.

TorqueIn.-Lbs.

TotalThrow

DowelPin Size

NumberPer Pack

PriceEach1-24

MB-26077 Tool Steel, Machinable .400 .450 1.00 .250 .710 1.00 3/8-16 6,000 360 .050 1/8 4 83.05MB-26088 Tool Steel, Machinable .600 .640 1.50 .375 .770 1.50 1/2-13 12,000 1,300 .075 1/4 2 72.65*D is clamp height.

Modular Pitbull® ClampsF

D

C

B

A

G

E The slotted modular Pitbull® clamp with a step offers increasedversatility through its unique riser design. This clamp supports thework piece off the machine table for through milling and drilling.The hardened and ground clamps are designed for use on workcubes, as well as machined tables with tapped holes or T-slotconfigurations. The compact modular Pitbull® clamp is ideal forclamping work pieces in a series by using the back surface of aclamp to locate the next work piece. The back of the clamp isground square to the bottom for precise location of parts. Theheight of the clamp can be adjusted by the depth of the milledslot used to locate the clamp.

PRODUCTS INC.


F

BA

C

E

H*

MB-26220 MB-26230

MB-26240 MB-26250

Cat. No. Description A B C D E F G

HMax

MovementHolding

Force Lbs.

PriceEach1-24

MB-26220 Medium/Compact 2.25 1.23 .98 NA .62 1.50 — .024 3,600 59.45MB-26230 Large/Compact 2.70 1.48 1.24 NA .74 1.85 — .050 6,000 93.40MB-26240 Medium/Slotted 4.08 1.25 .99 .730 .36 1.70 .50 .024 3,600 63.70MB-26250 Large/Slotted 4.20 1.50 1.61 1.378 .36 1.52 .43 .050 6,000 169.75

ID Xpansion™ Clamps

These clamps are ideal to hold multiple parts on an insidediameter for machining on a machining center. These clampsare produced in 10 sizes and can hold internal diameters from.16” to 4.06”. Expand clamp approximately .005” over relaxeddiameter and machine to fit work piece bore.

• Ideal for secondary operations on lathe parts• Easily machined to size on lathe or mill• Excellent for palletized setups• Allows more parts per work cube or fixture plates• Clamp body made of mild steel for machinability• Tighten with hex key or hydraulic pull cylinders (drill clearance

hole for longer bolt into cylinder)• Three mounting screws included

PRODUCTS INC.


AC

D

J

B

F

I

+.000/-.002E

HMountingScrews

IThread

PriceEachCat. No. A B C D F G* J

MB-31000 .42 .30 .24 .12 .787 .29 .16 2-56 on .540 BHC 2-56 .16 36.70MB-31050 .86 .63 .59 .23 1.170 .49 .28 6-32 on .825 BHC 8-32 .30 36.70MB-31100 .98 .75 .59 .23 1.240 .56 .48 6-32 on .910 BHC 1/4-20 .50 36.70MB-31150 .98 .75 .59 .23 1.476 .79 .53 6-32 on 1.140 BHC 5/16-18 .56 39.05MB-31200 1.13 .88 .69 .25 1.968 1.06 .71 8-32 on 1.550 BHC 3/8-16 .71 50.80MB-31250 1.25 1.00 .81 .25 2.205 1.39 .90 8-32 on 1.790 BHC 1/2-13 .71 62.65MB-31300 1.56 1.25 1.06 .31 2.736 1.65 1.15 10-32 on 2.200 BHC 5/8-11 .79 80.30MB-31350 1.56 1.25 1.06 .31 2.972 2.03 1.15 10-32 on 2.515 BHC 5/8-11 .79 88.10MB-31400 1.79 1.48 1.27 .31 4.232 3.06 1.15 1/4-20 on 3.646 BHC 5/8-11 .79 140.10MB-31450 1.79 1.48 1.27 .31 5.232 4.06 1.15 1/4-20 on 4.648 BHC 5/8-11 .79 171.95MB-31500 1.79 1.48 1.27 .31 5.232 6.89 1.15 1/4-20 on 4.648 BHC 5/8-11 .79 484.10*The “G” dimension is the minimum diameter that the “F” dimension can be machined or turned (down) to.

0157.qxd 2/17/2010 3:16 PM Page 157





















Cla

mp

s an

d W

ork

ho

ldin

gCLAMPING SYSTEMS

T-Slot Toe Clamps

A low profile cam action clamp with positive down force. Thisclamp is mounted in the T-slots of machine tables by sliding theclamp to the work piece and tightening the locking screw. Totaldistance of movement .100”. Two clamping edges, smooth formachined surface, and serrated for rough cut material.

PRODUCTS INC.


1.12

.62

1.94

.38

1.00

Cat. No. T-Slot Size

PriceEach1-24 Cat. No. T-Slot Size

PriceEach1-24

MB-24128 9/16 40.20 MB-24168 11/16 40.20MB-24148 5/8 40.20

Knife Edge Clamps

Low profile, fast cam action. Hardened steel bites into workpiecefor secure clamping for castings and rough cut stock. Followscontour of part for maximum contact.

PRODUCTS INC.


Thread ClampsPriceEach For

PriceEach

Cat. No. Size Per Pack 1-24 Cat. No. Set 1-24Sets Replacement WasherMB-22584 3/8-16 8 98.75 MB-12584 MB-22584 8.40MB-22588 1/2-13 8 115.95 MB-12588 MB-22588 8.85MB-22592 5/8-11 4 76.95 MB-12592 MB-22592 10.45

Compact Toe Clamps

Cam action, positive down force clamps can be used in series.Clamp base should be installed in a slot to retain location. Clampbase provides for higher clamping; height is determined by depthof slot. Mounting screws included.

PRODUCTS INC.


D

GF

C

AE

B

Total PriceDistance of Key Mounting Each

Cat. No. A B C D E F G Movement Size Screws 1-24MB-24106 1.70 .75 .50 1.00 .090 .75 .25 .050 3/16 5/16-18x3/4 39.10MB-24108 2.12 1.00 .45 1.32 .110 1.00 .38 .100 5/16 3/8-16x3/4 44.10

Pitbull® Clamps

The Pitbull® clamp is a revolu-tionary new fixture clamp withpositive down force and a lowgripping profile. High verticaland horizontal clamping forcesare generated, considering thesize of the Pitbull® Clamps. Ituses a standard cap screwand an oil resistant O-ring.The Pitbull® Clamp is availablein 5 sizes and several styles, atool steel knife edge foraggressive stock removal, atool steel blunt edge forgeneral purpose and a brassversion to help preventmarring in the work piece.

PRODUCTS INC.


Screw Size

Max. HoldingForce (Lbs.)

TotalThrow

NumberPer Pack

Price PerPackage

1-24Cat. No. Material/Edge A B CPBCL-1 Steel/Knife .150 .140 .375 4-40 650 .0075 8 74.60PBCL-2 Steel/Blunt .150 .140 .375 4-40 650 .0075 8 74.60PBCL-3 Brass/Blunt .150 .140 .375 4-40 650 .0075 8 74.60PBCL-4 Steel/Knife .200 .187 .500 8-32 1,500 .0160 8 79.20PBCL-5 Steel/Blunt .200 .187 .500 8-32 1,500 .0160 8 79.20PBCL-6 Brass/Blunt .200 .187 .500 8-32 1,500 .0160 8 79.20PBCL-7 Steel/Knife .300 .280 .750 1/4-20 3,600 .0240 6 76.80PBCL-8 Steel/Blunt .300 .280 .750 1/4-20 3,600 .0240 6 76.80PBCL-9 Brass/Blunt .300 .280 .750 1/4-20 3,600 .0240 6 76.80

OK Vise Low Profile ClampsThese hardened and ground clamps can produce holding forcesof over 19,000 lbs. The OK-Vise clamp achieves this by its cross-wedge construction, which allows the clamp to lock firmly in everydirection as it is tightened down. Jaws with 30-34 HRC can bemachined to suit the geometry of the workpiece. Includes mount-ing screws.

Single Wedge

Completely free of play.

PRODUCTS INC.


BD

F

OK-VISE A max.A min.

E

C

PressingForce of

Jaws (Lbs.)

Hardnessof Jaws(HRC)

A MountingScrew

PriceEachCat. No. Min. Optimum Max B C D E F

MB-471* 1.06 1.14 1.22 1.14 .59 .83 .10 .040 5/16-18x3/4 3,300 48-52 102.20MB-479 1.06 1.14 1.22 1.14 .59 .83 .10 .040 5/16-18x3/4 3,300 48-52 102.20MB-472 1.65 1.77 1.93 1.61 .87 1.18 .16 .080 1/2-13x11/4 6,600 48-52 151.55MB-474* 1.30 1.38 1.46 1.14 .59 .83 .10 .040 5/16-18x3/4 3,300 30-34 143.15MB-475 2.05 2.17 2.32 1.61 .87 1.18 .16 .080 1/2-13x11/4 6,600 30-34 217.65*Ends of jaws are smooth

Double Wedge

Pull down action towards the work piece.

PRODUCTS INC.

BD

F

OK-VISE

A max.A min.

E

CC1

Discount 143 applies.PressureForce of

Jaws (Lbs.)

Hardnessof Jaws(HRC)

A MountingScrew

PriceEachCat. No. Min. Opt. Max. B C C1 D E F

MB-477 1.65 1.77 1.93 1.61 1.42 1.18 1.18 .20 .080 1/2-13x11/2 11,000 48-52 214.00MB-478 2.24 2.40 2.64 2.20 1.97 1.65 1.65 .20 .120 5/8-11x21/4 19,800 48-52 359.50

0158.qxd 2/17/2010 3:16 PM Page 158

http://www.reidsupply.com/Detail.aspx?itm=PBCL-1































Clam

ps an

d W

orkh

old

ing

CLAMPING SYSTEMS

TalonGrip™ Vise Jaws SystemsSteel Vise Jaw SetSet includes 4 TalonGrips™, 1 stop with M5 screws.

TalonGrip™ vise jaws systems is a new and innovative productthat will increase the versatility of your standard 4” and 6” vises. Itis a simple bolt on system that will allow you to perform aggres-sive machining operations while clamping on as little as .060 ofan inch. Ideal for small lot sizes, difficult application or proto-typework when building a fixture would not be beneficial. TalonGrips™

are also available with the Pitbull® clamp or soft jaw applications.

PRODUCTS INC.

DC

B A

C

AD

B

E

Vise Jaw

Grip

TalonGrip™ Vise Jaw SystemsVise Jaw Grips and Stops

Cat. No. Description A B C DRecommendedGripping Height

PerPack Price Each

MB-32050 Grips .75 .500 .250 10-32 .060-.075 2 24.50MB-33050 Grips .75 .500 .250 M5 .060-.075 2 24.50MB-32025 Stop — — — 10-32 — 1 15.00MB-33025 Stop — — — M5 — 1 15.00

TalonGrip™ Vise Jaws SystemsFixture Grips

Cat. No. A B C DRecommendedGripping Height

PerPack Price Each

MB-32075 .75 .75 .312 10-32 .06-.120 2 27.50MB-33075 .75 .75 .312 M5 .06-.120 2 27.50MB-32100 .75 1.00 .312 10-32 .06-.120 2 30.25MB-33100 .75 1.00 .312 M5 .06-.120 2 30.25

VersaGrip™ Vise Jaws SystemsSteel Vise Jaw SetsSet includes 4 VersaGrips™

VersaGrip™ allows you the versatility of clamping standard visework as well as providing a solution for difficult applications thatwould normally require fixturing or machining soft-jaws. By simplyreplacing your current jaws with the VersaGrip™ system you cansecurely hold odd shaped parts while machining at speeds andfeeds you never thought possible. This system can accommodatea wide range of part sizes as well as holding multiple parts in asingle cycle. The hardened (52-54 RC) VersaGrip™ has penetrat-ing teeth designed to bite into your workpiece preventing lateraland horizontal movements. These grips will hold flame cut parts,castings, even parts with a negative draft.

PRODUCTS INC.

A

C

B

C

B

E

D

A

Vise Jaw

Grip

VersaGrip™ Vise Jaws SystemsVersaGrips™

Cat. No. A B CRecommendedGripping Height

PerPack Price Each

MB-32175 .750 .375 M5 .060-.140 2 35.00

CAM ACTION CLAMPS

Low profile quick action clamp. Jaw pivots forward and downwardat the same time when the handle is turned. Locks positively atany position within its 180° turn, so that it will hold parts that varyslightly in dimension. Clamps with extended base allow positionadjustment on machine tables.

Standard

Extended

Cat. No. Vise Size A B C D E Price EachMB-32044 4 2.5 .688 1.49 4.0 1.0 150.00MB-32066 4 / 6 2.5/3.88 .688/.94 1.74 6.0 1.0 170.00MB-32068 6 3.88 .94 1.74 8.0 1.0 190.00

Cat. No. Vise Size A B C D E Price EachMB-32166 4 / 6 6.00 1.88 1.0 2.5/3.88 .688/.94 185.00MB-32168 6 8.00 1.88 1.0 3.88 .94 200.00

Tool Sets

See pages735, 736, 738.

LifetimeGuarantee






Price Each1-11Cat. No. Base Stud A B C D E F G

CAC-5 Standard 5/16-18 11/4 1 15/8 13/4 5 1/8 — 63.41CAC-10 Extended 5/16-18* 11/4 1 15/8 31/8 5 1/8 1 71.68CAC-15 Standard 1/2-13 17/8 11/2 21/2 23/4 71/2 5/32 — 74.55CAC-20 Extended 1/2-13* 17/8 11/2 21/2 43/4 71/2 5/32 11/2 79.52*Stud not included in extended base clamps

0159.qxd 2/22/2010 9:25 AM Page 159















http://www.reidsupply.com/Detail.aspx?itm=CAC-10





Cla

mp

s an

d W

ork

ho

ldin

gCLAMP ASSEMBLIES

Strap

Spherical washers compensate for irregularities between clampstrap and part being clamped allowing for more rigid clamping.Double end clamp straps can be used for clamping flat workpieces or they can be inverted for holding round work pieces inV-blocks or other nesting arrangements. All parts (except jamnuts) are heat treated steel with black oxide finish.

Cat. No. A B C D E F GThread

SizePrice Each

1-24ACA-107 7/8 5/8 3/8 21/2 1 21/4 7/8 1/4-20 23.63JCA-13515 13/4 11/4 5/8 31/2 11/8 31/2 17/16 3/8-16 25.18JCA-13516 13/4 11/4 5/8 41/2 15/8 31/2 17/16 3/8-16 29.75

Flange Nut

Used where high clamping pressures are needed and vibrationcould cause loosening. They have a spherical flange nut andwasher for greater flexibility. Extra long, true milled slot allowsmore clearance for placing and removing work.

F

GThreadSize

A

C

B

DE

PriceEachCat. No. A B C D E F G** Thread

JCA-12701* 3/4 5/8 1/2 2 5/8 15/8 7/8 1/4-20 27.49JCA-12703 11/2 11/4 7/8 31/2 11/8 215/16 17/16 3/8-16 33.74JCA-12705 11/2 11/4 7/8 41/2 15/8 215/16 115/16 3/8-16 36.86JCA-12707 11/8 11/2 11/8 41/2 11/4 3 21/8 1/2-13 39.99JCA-12710 11/8 11/2 11/8 6 2 3 27/8 1/2-13 36.94JCA-12711 25/8 13/4 13/8 5 11/2 51/16 21/8 5/8-11 43.70JCA-12713 25/8 13/4 13/8 7 21/2 51/16 31/8 5/8-11 46.34JCA-12714 13/4 13/4 11/2 5 11/2 43/8 21/8 3/4-10 50.71JCA-12716 13/4 13/4 11/2 7 21/2 43/8 31/8 3/4-10 54.19*Finger handle not included. See page 88 for finger handle.**G dimension represents an optimum dimension.

Radius End Flange Nut

For heavy duty clamping of plain surfaces with spherical flangenut and washer for angular flexibility. Radius end strap and springloaded stud for quick release.

F

GThreadSize

A

C

B

DE

Center CamSingle End

Note: See page 161 for additional steel cam handles.

Cat. No. A B C D E G HThread

SizePrice Each

1-24ACA-305 3/4 5/8 3/8 2 5/8 7/8 21/2 1/4-20 26.93ACA-307 3/4 5/8 3/8 2 1/2 1 7/8 21/2 1/4-20 27.62JCA-12513 11/8 7/8 1/2 21/2 3/4 11/4 37/16 5/16-18 34.82JCA-12514 11/8 7/8 1/2 31/2 11/4 11/4 37/16 5/16-18 34.82JCA-12515 11/2 11/4 5/8 31/2 11/8 17/16 37/16 3/8-16 36.58JCA-12516 11/2 11/4 5/8 41/2 15/8 17/16 37/16 3/8-16 37.31ACA-332 13/8 11/2 3/4 41/2 11/4 17/8 5 1/2-13 55.00JCA-12518 13/8 11/2 3/4 6 2 1/7/8 5 1/2-13 54.55JCA-12519 15/8 13/4 7/8 5 11/2 115/16 51/16 5/8-11 54.55

Center CamDouble End

Note: See page 161 for additional steel cam handles.

Cat. No. Jergens A B C D E HThread

Size

PriceEach1-24

ACA-350 12523 13/8 11/2 3/4 4 11/4 5 1/2-13 55.74ACA-354 12524 13/8 11/2 3/4 5 11/4 5 1/2-13 55.96ACA-368 12526 15/8 15/8 7/8 6 11/2 51/16 5/8-11 65.77

Double Cam

Features fast-action, light duty holding of plain surface workwhere quick movements are required in a restricted space. Longend slot for lateral adjustment. Spring loaded stud member understurdy double cam lever.

GThreadSize

A

C

B

DE

H

PriceEachCat. No. A B C D E G** H Thread

JCA-12501* 5/8 5/8 1/2 2 5/8 7/8 21/2 1/4-20 51.24JCA-12502 15/16 11/4 7/8 31/2 11/8 17/16 37/16 3/8-16 58.75*Finger handle not included. See page 88 for finger handle.**G dimension represents an optimum dimension.

PriceEachCat. No. A B C D E F G** Thread

JCA-14103 7/8 5/8 3/8 2 5/8 15/8 7/8 1/4-20 25.32JCA-14105 13/4 11/4 5/8 31/2 11/8 215/16 17/16 3/8-16 29.37JCA-14108 11/2 11/2 3/4 41/2 11/4 3 17/8 1/2-13 35.61JCA-14111 31/8 13/4 7/8 5 11/2 51/16 2 5/8-11 47.50JCA-14114 21/4 13/4 1 5 11/2 43/8 21/8 3/4-10 55.00

PriceEachCat. No. A B C D E F G Thread

JCA-14123 7/8 5/8 3/8 2 1 15/8 11/16 1/4-20 21.08JCA-14125 13/4 11/4 5/8 31/2 11/2 215/16 11/4 3/8-16 27.65JCA-14128 11/2 11/2 3/4 41/2 113/16 3 115/16 1/2-13 29.87JCA-14134 21/4 13/4 1 5 21/16 43/8 23/16 3/4-10 45.88

Radius Swing

0160.qxd 2/17/2010 3:17 PM Page 160

http://www.reidsupply.com/Detail.aspx?itm=JCA-13515




























http://www.reidsupply.com/Detail.aspx?itm=ACA-107








Clam

ps an

d W

orkh

old

ing

A

DE

L

C

G

B

CLAMP ASSEMBLIESSwing Clamp Assemblies

Very useful in limited space applications. Knob swivel screwassembly allows for quick clamping and release and for protectionagainst marring the work piece.The shoe of the swivel screwstops rotation upon contact with the work piece. To compensatefor irregular work surfaces, the shoe swivels approximately threedegrees in all directions. Arm may be used for right or left handswing. Knob and arm are cadmium plated cast iron. All otherparts are heat treated steel with black oxide finish.

Reamed Hole Mounting

C

B

A

D

D

Cat. No. A+.000/-.001

B C DThreadTravel

PriceEach

SCA-21205 2 .874 11/8 1/2-13 1.00 79.28SCA-21219 3 1.123 13/8 5/8-11 1.50 79.28

Flange Base

H

A

E

F

AlternateStop PinLocations

G

B

C

D

ThreadTravel

PriceEachCat. No. A B C D E F G H

SCA-21202 11/2 1 17/16 11/2 3/4 1 #10 5/16-18 .40 51.67SCA-21211 3 1.25 21/4 21/4 11/8 13/8 1/4 1/2-13 1.00 84.23SCA-21223 4 1.25 21/4 21/4 11/4 11/2 3/8 5/8-11 1.25 98.31

Hook Clamp Assemblies

Alloy steel, black oxide finish. Ideal for jig and fixture quick buildsystems. Hook rotates 360°. Screws and springs provided.

Bold catalog numbers conform to TCMAI Standards.

C

B

FCap

Screw

AReam

C

B

GStud

AReam

D

E

FCap

Screw

Cap ScrewF

Stud/NutG


HCA-C1 .625 15/16 1/2 11/16 3/8 5/16-18 x 13/4 — 22.27HCA-S1 .625 15/16 1/2 11/16 3/8 — 5/16-18 x 21/2 22.27HCA-C2 .875 15/8 5/8 1 1/2 1/2-13 x 3 — 25.56HCA-S2 .875 15/8 5/8 1 1/2 — 1/2-13 x 4 25.56HCA-C3 1.125 113/16 7/8 17/16 3/4 5/8-11 x 31/2 — 28.66HCA-S3 1.125 113/16 7/8 17/16 3/4 — 5/8-11 x 5 28.66

Clamp Rests

Cat. No. A B C D E F GThread

SizePrice Each

1-24ACA-200 11/4 7/16 5/32 5/64 11/64 1 29/32 1/4-20 2.94ACA-205 17/8 1/2 7/32 3/16 7/32 115/32 15/16 5/16-18 3.13ACA-210 31/4 1/2 7/32 3/16 7/32 227/32 211/16 5/16-18 4.77ACA-220 21/2 9/16 11/32 5/32 11/32 2 113/16 3/8-16 4.04ACA-225 23/8 7/8 11/32 3/16 1/2 111/16 11/2 1/2-13 3.90ACA-230 37/8 9/16 11/32 5/32 11/32 33/8 33/16 3/8-16 3.77ACA-235 37/8 7/8 11/32 3/16 1/2 33/16 3 1/2-13 4.88ACA-240 25/8 7/8 11/32 3/16 1/2 115/16 111/16 5/8-11 5.04ACA-245 327/32 7/8 11/32 3/16 1/2 35/32 215/16 5/8-11 6.25ACA-250 23/4 7/8 11/32 3/16 1/2 21/16 17/8 3/4-10 6.16ACA-255 31/2 7/8 11/32 3/16 1/2 213/16 23/8 3/4-10 6.83

Cat. No. A B C D E F G HPrice Each

1-24InchJCA-35901 1 1 2 0.475 3/8 1/2 #10 11/2 11.15JCA-35902 11/2 11/2 21/2 0.60 1/2 1/2 1/4 2 15.78JCA-35904 1 2 31/2 0.720 5/8 3/4 5/16 23/4 15.78JCA-35905 1 3 41/2 0.720 5/8 3/4 5/16 33/4 18.60JCA-35906 1 4 51/2 0.720 5/8 3/4 5/16 43/4 23.28MetricJCA-35951 25 25 50 12 10 13 M5 38 13.95JCA-35952 25 38 64 15 13 13 M6 50 19.70JCA-35954 25 50 89 18 16 19 M8 70 19.70

Clamp Rest Plates4-Hole

Cat. No. A B C D E F G H I JPrice Each

1-24InchJCA-35903 2 2 3 .725 1/2 1/2 1/4 21/2 1/2 1 24.58MetricJCA-35953 50 50 75 18 12 13 M6 64 13 25 27.33

STEEL CAMS

These cams provide quick action locking with high holdingpressure. Can be used for many types of operations. Heat treatedfor long life. Black oxide finish. The slot on the double cam ismilled. Can be used with our eye bolts or forged rod ends. Seepage 192.Discount 22 applies.

Double Single

Cat. No. A B C D E F G H LPrice Each

1-25DoubleDC-1 21/2 9/16 1/4 3/16 1/16 3/8 3/16 9/16 — 13.16DC-2 31/2 5/8 5/16 1/4 1/16 1/2 9/32 11/16 — 15.39DC-3 5 11/8 1/2 3/8 7/64 5/8 13/32 15/16 — 19.38DC-4 53/8 11/4 5/8 5/8 9/64 7/8 9/16 13/16 — 21.83SingleSC-0 23/8 5/32 3/16 7/16 1/4 — 17/32 — 1/8 7.93SC-15 31/4 1/4 1/4 1/2 1/4 — 5/8 — 3/16 8.93SC-1A 41/2 5/16 3/8 5/8 5/16 — 25/32 — 15/32 9.70SC-2A 5 3/8 1/2 29/32 3/8 — 15/64 — 1/4 12.09

Clamp Rest Plates2-Hole

0161.qxd 2/17/2010 3:17 PM Page 161

http://www.reidsupply.com/Detail.aspx?itm=SCA-21205






http://www.reidsupply.com/Detail.aspx?itm=SC-1A

http://www.reidsupply.com/Detail.aspx?itm=SC-2A























http://www.reidsupply.com/Detail.aspx?itm=HCA-C1

http://www.reidsupply.com/Detail.aspx?itm=HCA-S1





http://www.reidsupply.com/Detail.aspx?itm=DC-1





Cla

mp

s an

d W

ork

ho

ldin

gSTRAP CLAMPS

Tapped End RadiusHeat Treated Steel

The specially designed end provides maximum pressure for edgeclamping. Long slot allows for lateral adjustment.Cat. No. A B C D E F G H Price EachCTE-2 1/4 2 3/8 5/8 1/2 1 7/32 1/4-20 6.69CTE-4 1/4 21/2 3/8 5/8 1/2 11/8 7/32 1/4-20 6.97CTE-6 5/16 23/4 1/2 1 7/16 11/2 9/32 5/16-18 8.58CTE-8 5/16 31/4 1/2 1 13/16 11/2 9/32 5/16-18 9.08CTE-12 3/8 3 5/8 11/4 3/4 111/16 5/16 3/8-16 9.55CTE-14 3/8 4 5/8 11/4 1 23/16 5/16 3/8-16 11.84CTE-16 3/8 5 5/8 11/4 11/2 211/16 5/16 3/8-16 12.63CTE-18 1/2 4 5/8 11/4 1 21/4 7/16 1/2-13 11.75CTE-20 1/2 41/2 5/8 11/4 11/2 21/4 7/16 1/2-13 12.53CTE-22 1/2 5 5/8 11/4 11/2 21/4 7/16 1/2-13 13.19CTE-24 1/2 6 5/8 11/4 11/2 21/4 7/16 1/2-13 14.70CTE-26 5/8 41/2 7/8 11/2 1 21/2 1/2 5/8-11 15.30CTE-28 5/8 5 7/8 11/2 11/2 21/2 1/2 5/8-11 16.99CTE-30 5/8 6 7/8 11/2 11/2 21/2 1/2 5/8-11 19.10

Single End RadiusHeat Treated Steel

The long slot increases the length of strap, allowing more clamp-ing pressure to be applied to the part. Finger grip on both sides ofthe clamp allows for easier lateral travel adjustments.Cat. No. A B C D E F G H Price EachCSE-2 1/4 2 3/8 5/8 1/2 1 3/16 1/8 5.02CSE-4 1/4 21/2 3/8 5/8 1/2 11/8 3/16 1/8 6.97CSE-6 5/16 23/4 1/2 1 7/16 11/2 1/4 3/16 8.58CSE-8 5/16 31/4 1/2 1 13/16 11/2 1/4 3/16 9.08CSE-12 3/8 3 5/8 11/4 3/4 111/16 3/8 9/32 10.52CSE-14 3/8 4 5/8 11/4 1 23/16 3/8 9/32 11.84CSE-18 1/2 4 5/8 11/4 1 21/4 3/8 9/32 11.84CSE-20 1/2 41/2 5/8 11/4 11/2 21/4 3/8 9/32 12.63CSE-22 1/2 5 5/8 11/4 11/2 21/4 3/8 9/32 13.19CSE-24 1/2 6 5/8 11/4 11/2 21/4 3/8 9/32 14.51CSE-26 5/8 41/2 7/8 11/2 1 21/2 1/2 9/32 15.30CSE-30 5/8 6 7/8 11/2 11/2 21/2 1/2 9/32 19.10CSE-32 3/4 6 1 13/4 13/4 31/4 1/2 5/16 24.85

Tapped End Radius304 Stainless Steel

Cat. No. A B C D E G H J Price EachCSS-1503 1/4 1/2 11/2 5/16 5/8 10-32 7/32 11/16 12.94CSS-1504 1/4 1/2 13/4 7/16 3/4 10-32 7/32 13/16 13.50CSS-1629 5/16 5/8 2 1/2 7/8 1/4-20 9/32 7/8 16.88CSS-1755 3/8 3/4 3 7/8 15/16 5/16-18 11/32 13/8 19.13CSS-1878 1/2 7/8 3 3/4 15/16 3/8-16 13/32 15/16 24.53

Flat 304 Stainless Steel

Cat. No. A B C D E F G Price EachCSS-1632 1/4 5/8 13/4 1/2 3/4 9/32 1/8 14.40CSS-1881 1/2 7/8 3 1 13/8 13/32 1/8 19.13

Radius304 Stainless Steel

PriceEachCat. No. A B C D E G H

CSS-1501 1/4 1/2 13/4 7/16 3/4 3/32 7/32 12.71CSS-1876 1/2 7/8 31/2 1 11/2 1/8 13/32 24.53

Tempered Steel - Varnished FinishPlain

Cat. No. A Bolt Size B C D E F GPrice Each

AMF-9 .43 M10 or 3/8 3.15 .59 1.18 .47 .59 1.18 11.03AMF-10 .55 M12, M14 or 1/2 3.94 .79 1.57 .55 .83 1.57 13.35AMF-12 .71 M16, M18 or 5/8 4.92 .98 1.97 .71 1.02 1.77 18.59AMF-13 .71 M16, M18 or 5/8 6.30 .98 1.97 .71 1.02 2.56 24.38AMF-14 .87 M20, M22 or 3/4 6.30 1.18 2.36 .87 1.18 2.36 35.43AMF-15 .71 M20, M22 or 3/4 7.87 1.18 2.36 .87 1.18 3.15 44.15

Tempered Steel - Varnished FinishSingle Goose-Neck

Cat. No. A Bolt Size B C D E F G H JPriceEach

AMF-35 .55 M12, M14 or 1/2 4.92 .79 1.57 .79 .63 1.57 1.57 1.10 20.39AMF-38 .87 M20, M22 or 3/4 6.30 1.18 2.36 1.18 .94 2.17 2.17 1.74 48.24

Tempered Steel - Varnished FinishForked Clamp with Shoe

Price EachCat. No. A Bolt Size B C D E G H

AMF-34 .87 M20, M22 or 3/4 9.84 1.58 2.36 1.38 1.77 2.68 74.08

Tempered Steel - Varnished FinishStep Clamps

Compatible with universal step blocks AMF-40, 41, and 42.

Cat. No. A Bolt Size B C D E F G Price EachAMF-17 .43 M10 or 3/8 3.15 .59 1.18 .47 .59 1.18 16.50AMF-18 .55 M12, M14 or 1/2 3.94 .79 1.57 .55 .83 1.57 19.02

Plain Clamps with Adjusting Screw

Best suited for low work pieces. Clamping height is easilyadjusted with adjusting screw. Adjusting screw (included) hasknurled screw or socket head. Made from tempered steel,varnished finish. See pages 187 and 190 for T-bolts and nuts.Cat. No. A B C D E* Slot Width Price EachAMF-1 3.94 .83 1.58 M12 .39-1.81 .55 31.95AMF-2 4.92 1.02 1.77 M16 .51-2.05 .71 47.40AMF-3 6.30 1.18 2.36 M20 .63-2.56 .87 76.19*Depends on depth of slot and position of fixture nut

0162.qxd 2/23/2010 12:50 PM Page 162

http://www.reidsupply.com/Detail.aspx?itm=CSS-1503









http://www.reidsupply.com/Detail.aspx?itm=CTE-12










http://www.reidsupply.com/Detail.aspx?itm=CSE-12









http://www.reidsupply.com/Detail.aspx?itm=AMF-10
























Clam

ps an

d W

orkh

old

ing

CLAMPSDrop-Forged Steel Clamps

Forged from 1030 steel for toughness. Because of draft or taperon forgings minimum dimensions of slot are given.

Plain Slot Pattern

Slot PriceEachCat. No. Lgth. Width Thickness Lgth. Width

PS-4 4 15/8 3/4 13/8 11/16 8.65PS-6 6 13/4 7/8 21/16 11/16 13.73PS-8 8 21/8 11/8 213/16 13/16 22.28PS-10 10 21/2 13/8 311/16 15/16 42.12

Screw Heel

Slot PriceEachCat. No. Lgth. Width Thickness Lgth. Width Screw

PS-12 4 15/8 3/4 15/16 11/16 1/2-13 x 11/4 19.99PS-14 6 13/4 7/8 111/16 11/16 5/8-11 x 11/2 27.97PS-16 8 21/8 11/8 27/16 13/16 3/4-10 x 13/4 40.00

Goose Neck Pattern

Slot NeckOffset

PriceEachCat. No. Lgth. Width Thickness Lgth. Width

GN-4 4 13/8 3/4 15/16 11/16 13/16 9.22GN-6 6 13/4 7/8 111/16 11/16 15/16 16.53GN-8 8 21/8 11/8 27/16 13/16 11/8 23.59

“U” Pattern

Slot PriceEachCat. No. Lgth. Width Thickness Lgth. Width

UP-4 4 13/4 3/4 31/2 11/16 8.65UP-6 6 2 7/8 51/2 11/16 14.45UP-8 8 23/8 11/8 73/8 13/16 22.28UP-10 10 23/4 11/4 9 15/16 35.22UP-12 12 31/4 13/8 11 11/16 48.15

SET UP WEDGES

Max.Thickness

PriceEachCat. No. Lgth. Width

SUW-950 3 1 1/4 6.03SUW-951 5 1 1/2 8.44SUW-952 6 11/4 3/4 9.78

ADJUSTABLE CLAMPSRite Hite Self Positioning Hold Down Clamps

These clamps have instant adjustment up to 5”. The main body ofthe clamp will move from 0” to whatever the max. height of theparticular clamp is, instantly. Two models are available; longerreach for normal requirements and shorter reach where tablespace is at a premium. Up to 65,000 lbs. load limits. Clamps havea rocker design which allows for “instant set-ups” when held inplace by a T-nut in a T-slot. Use with T-nuts on page 188 andset-up studs on page 189.

MaxStudSize

LoadLimit(Lbs.)

ClampingRange

PriceEachCat. No. Dimensions

Longer ReachJMC-375 3/8 0-11/4 11/8 x 31/2 7,000 35.91JMC-500 1/2 0-21/2 17/16 x 53/4 8,800 39.12JMC-625 5/8 0-31/2 17/8 x 63/4 14,500 46.09JMC-750 3/4 0-5 21/8 x 9 24,000 67.53Shorter ReachJMC-376 3/8 0-1 11/8 x 3 8,800 34.83JMC-501 1/2 0-13/4 13/8 x 41/4 13,200 38.05JMC-626 5/8 0-23/4 17/8 x 51/2 19,000 45.02

Stepless Universal Height Clamps

Quickly adapts to various clamping heights without supports orblocks. Allows for quick set-ups. Holds work on planers, boringmills, milling machines and other applications. Made fromhardened steel, yellow passivated. See pages 187 and 190 forT-bolts and nuts.

Price EachCat. No. A B C D E F G H J L 1-25AMF-6 2.24 0-1.38 .51 1.50 3.47 1.10 1.89 .91 2.68 .55 34.38AMF-7 3.54 0-2.17 .71 2.21 5.12 1.50 2.91 1.14 3.98 .71 42.76AMF-8 4.06 0-2.56 .87 2.60 5.51 1.81 3.15 1.26 4.41 .79 55.16

Universal Adjustable Strap Clamps

Drop forged from selected hardenedcarbon steel. Holds work on planers,boring mills, face plates of lathes,milling machines and many otherapplications.

ClampWidth

MaximumT-Bolt Dia.Cat. No. OAL Adjustment Price Each

USC-1 51/16 15/8 21/4 5/8 40.82USC-2 8 13/4 4 3/4 74.34

One Piece Adjustable Clamps

Forged steel clamp offers instant height adjustment withoutblocks or shims. One piece assembly allows quick setups.Removable brass shims protect machine table and work piece.Clamp swings 90° in either direction for loading clearance. Seepages 187 and 190 for T-slot bolts and flange nuts for usewith these clamps.

C

BA

D

StudSize

ClampingRange

Price Each1-49Cat. No. A B C D

USC-40 17/8 11/8 1 11/4 3/8 0-13/4 22.25USC-50 25/16 17/16 17/16 15/8 1/2 0-21/16 24.34USC-60 31/4 2 17/8 17/8 5/8 0-3 34.78USC-70 31/2 21/8 21/4 25/8 3/4 0-41/4 52.88

0163.qxd 2/23/2010 12:51 PM Page 163

http://www.reidsupply.com/Detail.aspx?itm=SUW-950



http://www.reidsupply.com/Detail.aspx?itm=USC-40




http://www.reidsupply.com/Detail.aspx?itm=PS-10




http://www.reidsupply.com/Detail.aspx?itm=UP-10










http://www.reidsupply.com/Detail.aspx?itm=JMC-375










http://www.reidsupply.com/Detail.aspx?itm=GN-4




Cla

mp

s an

d W

ork

ho

ldin

gSTRAP CLAMPS

Strap Clamp Spring Lifters

Designed to speed set-ups wherever strap clamps are used.Spring lifter slides over T-slot bolt or stud and is held by tighteningthe set screw on locking collar. The strap clamp rests on thesupport collar and the spring holds the clamp just above the finaltightened height, permitting the work to be quickly and easily slidunderneath.Cat. No. Fits Dia. Price Each Cat. No. Fits Dia. Price EachSCL-801 1/4 4.92 SCL-805 5/8 5.94SCL-803 3/8 5.52 SCL-806 3/4 8.81SCL-804 1/2 5.41

ADJUSTABLE CLAMP RESTS

Cat. No. A B C D E Price EachCSS-6205 1 .190 3/4 10-32 1/16 2.30CSS-6256 1 1/4 11/16 1/4-20 5/64 2.32CSS-6258 11/2 1/4 13/16 1/4-20 5/64 2.54CSS-6320 15/8 5/16 13/8 5/16-18 3/32 3.20CSS-6321 17/8 5/16 15/8 5/16-18 3/32 3.20CSS-6382 15/8 3/8 13/8 3/8-16 1/8 3.60CSS-6384 25/8 3/8 23/8 3/8-16 1/8 3.83

UNIVERSAL STEP BLOCKS

Tempered steel, varnished finish. Step increments are vertically.183” and horizontally .091”. Step blocks sold individually. For usewith AMF step clamps AMF-17 and 18.

Cat. No. A B C D E Price EachAMF-40 .87 2.01 1.30 .75 1.50 5.36AMF-41 1.54 4.21 2.60 1.40 2.76 9.87AMF-42 2.80 8.19 5.16 2.68 5.32 24.38

CLAMPSPlain and Positive Grip Step Clamps

Machined from solid bar stock, case hardened and black oxidefinish. When used in conjunction with step setup blocks, positivegrip step clamps simplify and quicken setting up operationsconsiderably. Eliminates shimming to obtain the right height.

Note: Clamps for 5/16, 3/8, 1/2 and 5/8 bolts work with metric bolts M8,M10, M12 and M16 respectively.

Plain Grip Positive Grip

PlainCat. No.

PositiveCat. No.

BoltSize

SlotLgth.

Price EachOAL Width Thickness Plain Positive

CP-1 CS-1 5/16 or 3/8 21/2 1 1/2 11/4 9.28 9.87CP-2 CS-2 5/16 or 3/8 4 1 5/8 17/8 12.75 13.43CP-3 CS-3 5/16 or 3/8 6 11/8 3/4 25/8 15.94 17.10CP-4 CS-4 1/2 2 1/2 11/8 1/2 11/4 10.44 10.85CP-5 CS-5 1/2 4 11/4 3/4 17/8 14.55 15.18CP-6 CS-6 1/2 6 11/4 7/8 25/8 18.41 19.26CP-7 CS-7 5/8 21/2 11/4 5/8 11/4 13.06 13.98CP-8 CS-8 5/8 4 11/2 3/4 17/8 16.01 19.55CP-9 CS-9 5/8 6 11/2 7/8 25/8 20.77 23.19CP-10 CS-10 3/4 4 11/2 3/4 17/8 16.90 20.90CP-11 CS-11 3/4 6 15/8 1 23/4 24.64 29.03CP-12 CS-12 3/4 8 13/4 11/8 3 32.96 36.56

POSITIVE GRIP STEP SETUP BLOCKSHardened Steel or Aluminum

Two triangular pieces make up one block.

Bold catalog numbers conform to TCMAI standards.

Horizontal

Vertical

Steel Blocks Aluminum BlocksRange Width Cat. No. Price Each Cat. No. Price Each

3/4 to 11/2 1 1-S 4.98 1-A 5.1111/8 to 21/2 1 2-S 7.03 2-A 7.1621/2 to 6 1 3-S 17.36 3-A 17.67

13/4 to 33/4 11/2 4-S 11.1221/2 to 6 11/2 5-S 22.5631/2 to 9 11/2 6-S 43.55

13/4 to 33/4 2 7-S 14.2621/2 to 6 2 8-S 29.0331/2 to 9 2 9-S 54.29

0164.qxd 2/17/2010 3:19 PM Page 164

http://www.reidsupply.com/Detail.aspx?itm=SCL-801















http://www.reidsupply.com/Detail.aspx?itm=CP-10

http://www.reidsupply.com/Detail.aspx?itm=CS-10























http://www.reidsupply.com/Detail.aspx?itm=1-S

http://www.reidsupply.com/Detail.aspx?itm=1-A












Clam

ps an

d W

orkh

old

ing

Toe Clamps

Powerful, low profile clamp that grips on the side of the workleaving the top surface open. No interference with cutting tools orreading and measuring instruments. Ideal for use on mills,planers, jig bores, drill presses or faceplates. Heat treated steel,black oxide finish. Toe is moved by an actuating screw. T-Wrenches are sold separately below. Toe moves on a 45° angleforcing workpiece down. 3° taper prevents back-off. A specialwasher, to help prevent possible damage by the anchor screw, isprovided with each clamp. See page 278 for socket head capscrews. See page 188 for T-slot nuts. Other sizes of brass toesavailable as special order. Call for price and delivery.

Slotted for 5/16 or M8 Socket Head Cap Screw

Price Each

Steel ToeCat. No.

Brass ToeCat. No.

SteelToe

BrassToeA B C D E F G H

Low GripNTC-41101 NTC-41131 2 1/2 1/16 3/4 1/8 5/8 1 — 39.12 45.51NTC-41102 — 21/2 1/2 1/16 11/4 1/8 5/8 1 — 41.80 —NTC-41103 — 3 1/2 1/16 13/4 1/8 5/8 1 — 44.49 —High GripNTC-41110 NTC-41121 2 1/2 1/16 3/4 — 5/8 1 5/8 41.98 47.33NTC-41111 — 21/2 1/2 1/16 11/4 — 5/8 1 5/8 44.66 —NTC-41112 — 3 1/2 1/16 13/4 — 5/8 1 5/8 47.39 —

Slotted for 1/2 or M12 Socket Head Cap Screw

Low Grip High Grip

Steel ToeCat. No.

PriceEachA B C D E F G H

Low GripNTC-41001 41/16 13/16 1/8 2 1/4 7/8 11/2 — 39.81NTC-41002 51/2 13/16 1/2 23/4 1/4 7/8 11/2 — 42.28NTC-41003 77/16 13/16 1 33/4 1/4 7/8 11/2 — 45.14High GripNTC-41010 41/16 13/16 1/8 2 — 7/8 11/2 7/8 42.68NTC-41011 51/2 13/16 1/2 23/4 — 7/8 11/2 7/8 45.23NTC-41012 77/16 13/16 1 33/4 — 7/8 11/2 7/8 48.07

Slotted for 5/8 or M16 Socket Head Cap ScrewSteel Toe Price

EachCat. No. A B C D E F G HLow GripNTC-41051 41/16 13/16 1/8 2 1/4 7/8 11/2 — 41.54NTC-41052 51/2 13/16 1/2 23/4 1/4 7/8 11/2 — 44.29High GripNTC-41061 41/16 13/16 1/8 2 — 7/8 11/2 7/8 47.46NTC-41062 51/2 13/16 1/2 23/4 — 7/8 11/2 7/8 50.23

CLAMPS


T-Slot ClampDrop Forged Steel

Each clamp is furnished with one T-slot bolt, nut and washer.Used for holding down work on planers, drill presses, millingmachines and other machines having slotted tables. Clamp isfixed in desired position by tightening nut and work is held bytightening down screw. The heavy duty heat-treated screw isequipped with sliding pin handle. The point is equipped with a V-slotted patented, ball-joint swivel pad (that cannot come off) tofacilitate holding small rounds in addition to flat surfaces.

Approx.Weight

Lbs.T-Slot Bolt

SizePriceEachCat. No. Capacity Clamping Depth

TSC-712 0-21/4 1/2x11/2 2 2.29 202.00

Quick Acting Hold Down Clamps

For holding where thickness and surface are not exact from partto part. Offers quick-set and release with adjustable pressureafter clamping. High tensile strength. Can be bolted or weldeddown or T-Slot can be used for milling tables. KT-411 and KT-423do not come with a base plate. KT-411-2 and KT-423-1 come witha T-Slot base and bolt.

ECA

DB

RatedLoad Lbs.


KT-411 19/10 11/2 211/16 21/4 4 1,500 21.06KT-411-2 T-Slot — 211/16 21/4 41/8 1,500 28.11KT-423 29/10 25/8 33/4 33/4 67/8 3,200 40.27KT-423-1 T-Slot — 33/4 4 71/4 3,200 57.42

JACK SCREWS

Jack screws are used in fixtures to support irregularly shapedwork pieces, such as castings and to eliminate bowing or warpingof thinner materials during machining. Heat treated steel, blackoxide finish.

Staight Knurl

E


SJS-500 3/8-16 11/4 11/8 17/8 3/8 6.29SJS-510 3/8-16 15/8 11/8 21/4 3/8 6.29SJS-515 3/8-16 2 11/8 25/8 3/8 6.65SJS-520 1/2-13 11/4 11/8 17/8 3/8 6.65SJS-525 1/2-13 15/8 11/8 21/4 3/8 7.03SJS-530 1/2-13 2 11/8 25/8 3/8 7.03SJS-535 1/2-13 21/2 11/8 31/8 3/8 7.19SJS-540 5/8-11 15/8 13/8 21/4 3/8 6.59SJS-545 5/8-11 2 13/8 25/8 3/8 6.59SJS-550 5/8-11 21/2 13/8 31/8 3/8 7.31

FIXTURE JACKS F

D

C

E

ThreadSize

G

A

B

J

Radius Head

Designed as a positive locking jack for irregular clamping toachieve various heights requiring a positive pressure stop onmilling fixtures, drill jigs, etc. Adjustable to fit irregularities ofmilling operations. Available in either smooth round head orhardened serrated gripping surface. Pin construction elevatesvertically, no rotation Outer diameter of bushing ground for pressfit. Made of ledloy, heat treated. Black oxide finish.

Serrated Head

D PriceEachCat. No. A B C Min. Max. E F G J Thread

Radius HeadJFJ-24901 5/8 13/16 3/16 9/16 11/2 1 1/4 5/32 3/8 3/8-16 24.37JFJ-24902 1 15/8 3/16 7/8 27/16 15/16 15/32 7/16 7/16 5/8-11 25.86JFJ-24903 11/2 23/4 3/16 7/8 31/2 13/4 13/16 1/2 9/16 1-8 29.80Serrated HeadJFJ-25101 5/8 13/16 3/16 9/16 11/2 1 1/4 5/32 3/8 3/8-16 27.33JFJ-25102 1 15/8 3/16 7/8 27/16 15/16 15/32 7/16 7/16 5/8-11 28.88JFJ-25103 11/2 23/4 3/16 7/8 31/2 13/4 13/16 1/2 9/16 1-8 33.69

High GripLow Grip

0165.qxd 2/17/2010 3:19 PM Page 165

http://www.reidsupply.com/Detail.aspx?itm=NTC-41101


















http://www.reidsupply.com/Detail.aspx?itm=TSC-712

http://www.reidsupply.com/Detail.aspx?itm=SJS-500










http://www.reidsupply.com/Detail.aspx?itm=JFJ-24901






http://www.reidsupply.com/Detail.aspx?itm=KT-411-2


http://www.reidsupply.com/Detail.aspx?itm=KT-411



Cla

mp

s an

d W

ork

ho

ldin

gSWIVEL PAD CLAMPS

Steel or Delrin Pads

Knurled Head Steel Body

Used where fingertip clamping is sufficient. Wide knurled headgives good gripping. Made of heat treated alloy steel. Pad swivels7 1/2° each side of centerline in all directions. Large, flat pad faceassures tighter clamping. Screw torque absorbed by pad. Conicalseat distributes clamping pressure uniformly. Ball joint construc-tion provides smooth angle adjustment and rotation of pad underpressure. Black oxide finish. Delrin pads eliminate marring whenclamping softer materials and help to eliminate distortion.


*Load rating applies to steel pads only

Steel LoadLbs.*

Price Each1-11Steel Pad

Cat. No.Delrin PadCat. No. A B C D E Steel Delrin

AM-1 CM-1 1/4-20 11/2 3/8 1 .185 900 7.40 7.48AM-2 CM-2 1/4-20 2 3/8 1 .185 900 7.48 7.71AM-3 CM-3 5/16-18 11/2 7/16 11/8 .240 2,290 7.25 7.63AM-4 CM-4 5/16-18 2 7/16 11/8 .240 2,290 7.25 7.63AM-5 CM-5 5/16-18 21/2 7/16 11/8 .240 2,290 7.48 7.86AM-6 CM-6 3/8-16 11/2 1/2 11/4 .293 3,340 7.71 8.30AM-7 CM-7 3/8-16 2 1/2 11/4 .293 3,340 7.86 8.30AM-8 CM-8 3/8-16 21/2 1/2 11/4 .293 3,340 8.36 8.65AM-9 CM-9 3/8-16 3 1/2 11/4 .293 3,340 8.36 8.65AM-10 CM-10 1/2-13 11/2 9/16 11/4 .400 7,300 8.72 9.20AM-11 CM-11 1/2-13 2 9/16 11/4 .400 7,300 8.72 9.20AM-12 CM-12 1/2-13 21/2 9/16 11/4 .400 7,300 9.73 9.86AM-13 CM-13 1/2-13 3 9/16 11/4 .400 7,300 9.73 9.86

Socket HeadSteel Body

Same general construction as knurled head swivel pad clampsdescribed at top of page. Used on holding applications whereeither maximum rigidity is necessary or where space is limited.Strong accurate sockets for maximum clamping leverage.

Steel PadCat. No.

DelrinPadCat. No.

HexE

Steel LoadLbs.*

Price Each1-11

A B C D Steel DelrinAD-0 CD-0 10-32 11/32 1/2 .146 3/32 500 4.39 4.57AD-1 CD-1 1/4-20 11/32 1/2 .185 1/8 900 3.72 4.02AD-2 CD-2 1/4-20 19/32 3/4 .185 1/8 900 3.94 4.30AD-3 CD-3 1/4-20 27/32 1 .185 1/8 900 4.02 4.30AD-4 CD-4 1/4-20 111/32 11/2 .185 1/8 900 4.10 4.51AD-5 CD-5 5/16-18 35/64 3/4 .240 5/32 2,290 4.02 4.39AD-6 CD-6 5/16-18 51/64 1 .240 5/32 2,290 4.30 4.57AD-7 CD-7 5/16-18 119/64 11/2 .240 5/32 2,290 4.60 4.87AD-8 CD-8 5/16-18 151/64 2 .240 5/32 2,290 5.36 5.65AD-9 CD-9 3/8-16 1/2 3/4 .293 3/16 3,340 4.02 4.39AD-10 CD-10 3/8-16 3/4 1 .293 3/16 3,340 4.51 4.69AD-11 CD-11 3/8-16 11/4 11/2 .297 3/16 3,340 4.65 5.11AD-12 CD-12 3/8-16 13/4 2 .293 3/16 3,340 5.36 5.65AD-13 CD-13 1/2-13 7/16 3/4 .400 1/4 7,300 4.57 4.74AD-14 CD-14 1/2-13 11/16 1 .400 1/4 7,300 4.69 4.87AD-15 CD-15 1/2-13 13/16 11/2 .400 1/4 7,300 5.47 5.65AD-16 CD-16 1/2-13 111/16 2 .400 1/4 7,300 5.90 6.02AD-17 CD-17 1/2-13 211/16 3 .400 1/4 7,300 5.95 6.38AD-18 CD-18 5/8-11 5/8 1 .506 5/16 11,700 6.66 5.65AD-19 CD-19 5/8-11 15/8 2 .506 5/16 11,700 7.75 7.58AD-20 CD-20 5/8-11 25/8 3 .506 5/16 11,700 8.65 7.75AD-21 CD-21 3/4-10 1 11/2 .625 3/8 15,000 8.06 6.72AD-22 CD-22 3/4-10 2 21/2 .625 3/8 15,000 10.03 8.53AD-23 CD-23 1-8 53/64 11/2 .813 9/16 21,000 13.22 9.86*Load rating applies to steel pads only

Stainless Steel Body

Stainless Steel Pad Delrin Pad

StainlessSteel PadCat. No.

Price EachDelrin PadCat. No.

1-11A B C D E Stainless Delrin

ADS-0 CDS-0 10-32 11/32 1/2 .146 3/32 5.93 6.17ADS-2 CDS-2 1/4-20 19/32 3/4 .185 1/8 5.42 5.64ADS-3 CDS-3 1/4-20 27/32 1 .185 1/8 5.42 5.64ADS-4 CDS-4 1/4-20 111/32 11/2 .185 1/8 5.53 5.24ADS-5 CDS-5 5/16-18 35/64 3/4 .240 5/32 5.42 5.13ADS-6 CDS-6 5/16-18 51/64 1 .240 5/32 5.93 6.17ADS-7 CDS-7 5/16-18 119/64 11/2 .240 5/32 6.32 6.60ADS-8 CDS-8 5/16-18 151/64 2 .240 5/32 6.70 7.67ADS-10 CDS-10 3/8-16 3/4 1 .293 3/16 6.09 6.35ADS-11 CDS-11 3/8-16 11/4 11/2 .293 3/16 6.41 6.68ADS-12 CDS-12 3/8-16 13/4 2 .293 3/16 7.37 7.67ADS-14 CDS-14 1/2-13 11/16 1 .400 1/4 6.32 6.60ADS-16 CDS-16 1/2-13 111/16 2 .400 1/4 7.96 8.29ADS-22 CDS-22 3/4-10 2 21/2 .625 3/8 13.55 14.11

TOGGLE SHOE CLAMPSThe toggle shoe is held in place with a retaining spring whichpermits the shoe to adjust itself a full 10° in all directions. Thetoggle shoes snap on for quick assembly and are small enough toeliminate interference. Both shoe and screw are heat treated.Retaining springs available below.

Powdered Metal Hand Knob

A

Complete AssemblyToggle Clamps

w/o ShoesToggle

Dia.ShoeLgth.

KnobDia.

PriceEach

Price Each1-99Cat. No. Thread A Cat. No.

TA-141 1/4-20 13/16 5/16 3/16 11/8 5.69 T-141 4.98TA-142 1/4-20 115/16 5/16 3/16 11/8 5.79 T-142 5.11TA-143 1/4-20 211/16 5/16 3/16 11/8 5.97 T-143 5.29TA-144 1/4-20 37/16 5/16 3/16 11/8 6.31 T-144 5.66TA-561 5/16-18 11/4 3/8 7/32 11/2 6.44 T-561 5.70TA-562 5/16-18 2 3/8 7/32 11/2 6.61 T-562 5.90TA-563 5/16-18 23/4 3/8 7/32 11/2 6.85 T-563 6.16TA-564 5/16-18 31/2 3/8 7/32 11/2 7.31 T-564 6.66TA-381 3/8-16 11/4 7/16 1/4 2 7.88 T-381 7.21TA-382 3/8-16 2 7/16 1/4 2 8.11 T-382 7.45TA-383 3/8-16 23/4 7/16 1/4 2 8.57 T-383 7.97TA-384 3/8-16 31/2 7/16 1/4 2 8.97 T-384 8.41TA-385 3/8-16 41/4 7/16 1/4 2 9.37 T-385 8.85TA-121 1/2-13 2 9/16 5/16 21/2 9.45 T-121 8.85TA-122 1/2-13 23/4 9/16 5/16 21/2 9.79 T-122 9.19TA-123 1/2-13 31/2 9/16 5/16 21/2 10.42 T-123 9.89TA-124 1/2-13 41/4 9/16 5/16 21/2 10.99 T-124 10.51TA-125 1/2-13 5 9/16 5/16 21/2 11.46 T-125 11.01TA-581 5/8-11 21/4 11/16 13/32 3 12.51 T-581 11.95TA-582 5/8-11 3 11/16 13/32 3 12.98 T-582 12.43TA-583 5/8-11 33/4 11/16 13/32 3 13.73 T-583 13.26TA-584 5/8-11 41/2 11/16 13/32 3 14.35 T-584 13.91TA-585 5/8-11 51/4 11/16 13/32 3 15.03 T-585 14.65

Retaining Springs for Toggle Shoe Clamp Assemblies

Cat. No. For Thread Size Price EachTA-98001 1/4 .34TA-98002 5/16 .34TA-98003 3/8 .34TA-98004 1/2 .34TA-98005 5/8 .34

Knurled Head or Socket Head

Toggle shoes are not included with these styles. Toggle shoesare sold separately below.

AKnurled Head Socket Head

KnurledHeadCat. No.

SocketHeadCat.No.

KnurledHeadDia.

Price Each 1-99Thread A OAL Hex Knurled Socket

T-1411 T-1410 1/4-20 13/8 113/16 1/8 11/16 4.11 2.82T-1421 T-1420 1/4-20 21/8 29/16 1/8 11/16 4.17 2.93T-1431 T-1430 1/4-20 27/8 35/16 1/8 11/16 4.41 3.10T-1441 T-1440 1/4-20 35/8 41/16 1/8 11/16 4.61 3.52T-5611 T-5610 5/16-18 15/8 21/8 5/32 3/4 4.48 3.06T-5621 T-5620 5/16-18 23/8 27/8 5/32 3/4 4.61 3.17T-5631 T-5630 5/16-18 31/8 35/8 5/32 3/4 4.85 3.54T-5641 T-5640 5/16-18 37/8 43/8 5/32 3/4 5.31 3.95T-3811 T-3810 3/8-16 13/4 21/4 3/16 7/8 4.80 3.36T-3821 T-3820 3/8-16 21/2 3 3/16 7/8 5.02 3.63T-3831 T-3830 3/8-16 31/4 33/4 3/16 7/8 5.48 4.11T-3841 T-3840 3/8-16 4 41/2 3/16 7/8 6.22 4.61T-3851 T-3850 3/8-16 43/4 51/4 3/16 7/8 6.60 5.02T-1211 T-1210 1/2-13 21/2 31/8 1/4 1 5.85 4.24T-1221 T-1220 1/2-13 31/4 37/8 1/4 1 6.46 4.80T-1231 T-1230 1/2-13 4 45/8 1/4 1 7.03 5.29T-1241 T-1240 1/2-13 43/4 53/8 1/4 1 7.58 5.98T-1251 T-1250 1/2-13 51/2 61/8 1/4 1 8.17 6.46— T-5810 5/8-11 23/4 31/2 5/16 11/8 — 5.42T-5821 T-5820 5/8-11 31/2 41/4 5/16 11/8 8.08 6.16— T-5830 5/8-11 41/4 5 5/16 11/8 — 6.84T-5841 T-5840 5/8-11 5 53/4 5/16 11/8 9.70 7.80T-5851 T-5850 5/8-11 53/4 61/2 5/16 11/8 10.20 8.32

Toggle Shoes

Hardened round steel or nylon.Use nylon shoes for clampingsoft materials to preventmarring or scratching.

SteelCat. No.

NylonCat. No.

Usew/ Size

Price Each 1-99Dia. Lgth. Steel Nylon

SR-14 SR-14N 1/4-20 5/16 3/16 1.20 1.18LR-14 LR-14N 1/4-20 5/8 7/32 1.44 1.57SR-56 SR-56N 5/16-18 3/8 7/32 1.27 1.24LR-56 LR-56N 5/16-18 11/16 1/4 1.57 1.64SR-38 SR-38N 3/8-16 7/16 1/4 1.33 1.31LR-38 LR-38N 3/8-16 3/4 9/32 1.64 1.70SR-12 SR-12N 1/2-13 9/16 5/16 1.42 1.40LR-12 LR-12N 1/2-13 7/8 3/8 1.75 1.83SR-58 SR-58N 5/8-11 11/16 13/32 1.62 1.57LR-58 LR-58N 5/8-11 1 7/16 1.92 1.97

0166.qxd 2/17/2010 3:19 PM Page 166

http://www.reidsupply.com/Detail.aspx?itm=TA-98001




























http://www.reidsupply.com/Detail.aspx?itm=T-1411












































http://www.reidsupply.com/Detail.aspx?itm=SR-14N




























http://www.reidsupply.com/Detail.aspx?itm=SR-14





http://www.reidsupply.com/Detail.aspx?itm=ADS-10

http://www.reidsupply.com/Detail.aspx?itm=CDS-10











http://www.reidsupply.com/Detail.aspx?itm=LR-14N





http://www.reidsupply.com/Detail.aspx?itm=AM-10

http://www.reidsupply.com/Detail.aspx?itm=CM-10







http://www.reidsupply.com/Detail.aspx?itm=AD-10

http://www.reidsupply.com/Detail.aspx?itm=CD-10











































http://www.reidsupply.com/Detail.aspx?itm=LR-14











































http://www.reidsupply.com/Detail.aspx?itm=813


Clam

ps an

d W

orkh

old

ing

SWIVEL SCREW CLAMP SYSTEMSSwivel screw clamps can be constructed by pairing any of the bodies with any of the pads. All pads swivel 10° from vertical and haveleft hand threads to prevent backout. Clamping screws are made from 12L14 steel with a black oxide finish. Knob on the hand knobstyle is aluminum with the stud press-fitted in. Pads are case hardened, black oxide finish. Bodies and pads must be orderedseparately.

Bodies Only

A

BC

D

A

BC

D

Hand Knob

Socket Head

Knurled Head

Hand KnobCat. No. A B C D

PriceEach

SSC-1121 1/4-20 115/32 3/4 11/8 4.69SSC-1122 1/4-20 131/32 3/4 11/8 5.08SSC-1131 5/16-18 115/32 7/8 11/2 5.52SSC-1133 5/16-18 215/32 7/8 11/2 5.95SSC-1141 3/8-16 17/16 1 2 6.76SSC-1142 3/8-16 115/16 1 2 7.04SSC-1144 3/8-16 215/16 1 2 8.01SSC-1154 1/2-13 215/16 11/2 21/2 8.01SSC-1155 1/2-13 315/16 11/2 21/2 9.04

Socket HeadCat. No. A B C

PriceEach

SSC-1221 1/4-20 15/32 3/32 2.49SSC-1222 1/4-20 23/32 3/32 2.49SSC-1223 1/4-20 31/32 3/32 2.49SSC-1224 1/4-20 115/32 3/32 2.70SSC-1231 5/16-18 23/32 5/32 2.70SSC-1232 5/16-18 31/32 5/32 2.70SSC-1233 5/16-18 115/32 5/32 2.98SSC-1234 5/16-18 131/32 5/32 2.98SSC-1242 3/8-16 15/16 3/16 3.09SSC-1243 3/8-16 17/16 3/16 3.20SSC-1244 3/8-16 115/16 3/16 3.42SSC-1253 1/2-13 17/16 1/4 4.25SSC-1255 1/2-13 215/16 1/4 4.25

Knurled HeadCat. No. A B C D

PriceEach

SSC-1321 1/4-20 115/32 5/16 1 4.30SSC-1322 1/4-20 131/32 5/16 1 4.37SSC-1331 5/16-18 115/32 3/8 11/8 4.37SSC-1332 5/16-18 131/32 3/8 11/8 4.63SSC-1333 5/16-18 215/32 3/8 11/8 4.86SSC-1341 3/8-16 17/16 7/16 11/4 4.86SSC-1342 3/8-16 115/16 7/16 11/4 4.97SSC-1343 3/8-16 27/16 7/16 11/4 5.13SSC-1344 3/8-16 215/16 7/16 11/4 5.25SSC-1354 1/2-13 215/16 7/16 11/4 5.68

A

B

C HEX

Pads Only

B

D

A

CA

B

CSmall Pad Large Pad

Fits BodyThread Size

Internal ThreadLft. Hand

Small PadCat. No. Price Each

Large PadCat. No. Price EachA B C A B C D

1/4-20 8-36 SSC-1501 .193 3/16 1/16 1.01 SSC-1601 5/16 3/8 1/8 1/8 1.035/16-18 12-28 SSC-1502 19/64 1/4 3/64 1.16 SSC-1602 23/64 1/2 9/64 5/32 1.163/8-16 1/4-28 SSC-1503 21/64 19/64 1/16 1.36 SSC-1603 7/16 9/16 11/64 3/16 1.361/2-13 5/16-24 SSC-1504 25/64 13/32 1/16 1.56 SSC-1604 27/64 3/4 1/8 3/16 1.56

QUICK ACTING KNOBS AND INSERTSQuick Acting Knobs - Inch and Metric

For faster clamping. Tilt knob and it will slide in or out. Straightenknob and threads will engage for clamping. Many tooling applica-tions. Made from powdered metal.

A

DC

B

Fixture

Work

Fixture

Work

ThreadSIze

Price EachCat. No. A B C D 1-11InchQK-1 1/4-20 11/8 9/16 5/8 5/16 4.11QK-2 5/16-18 11/2 11/16 7/8 1/2 4.80QK-3 3/8-16 2 13/16 1 1/2 5.48QK-4 1/2-13 21/2 1 11/8 9/16 6.73QK-5 5/8-11 3 11/4 11/4 5/8 8.45QK-6 3/4-10 3 11/4 11/4 5/8 15.55MetricQK-20 M6x1 11/8 9/16 5/8 5/16 6.03QK-25 M8x1.25 11/2 11/16 7/8 1/2 7.56QK-30 M10x1.5 2 13/16 1 1/2 8.08QK-35 M12x1.75 21/2 1 11/8 9/16 8.45QK-40 M16x2.00 3 11/4 11/4 5/8 8.69

Quick Acting Inserts

Heat treated steel. Black oxide finish. Easily installed in fixture bysimply drilling and tapping hole at required location. For quickaction tilt screw and it will slide in or out. Straighten screw andthreads engage for clamping. See clamp assemblies above foruse with these quick acting inserts.

Work

FixtureInsertLocking Nut

QuickActingInsert

BA

C

D

Price EachCat. No. A B C D 1-11QA-1 1/4-20 1/2-20 1/2 17/64 4.30QA-2 5/16-18 5/8-18 5/8 21/64 4.61QA-3 3/8-16 3/4-16 3/4 25/64 5.31QA-4 1/2-13 1-14 1 33/64 6.73QA-5 5/8-11 11/4-12 11/4 41/64 8.45

Insert Locking Nuts

Used for locking quick actinginserts in position. Heat treatedsteel. Black oxide finish.

ThreadSize

HexSize

Price EachCat. No. Thickness 1-11QN-1 1/2-20 3/4 3/16 1.09QN-2 5/8-18 11/16 1/4 1.49QN-3 3/4-16 11/8 5/16 1.81QN-4 1-14 11/2 3/8 2.82QN-5 11/4-12 13/4 7/16 3.43

0167.qxd 2/17/2010 3:20 PM Page 167

http://www.reidsupply.com/Detail.aspx?itm=SSC-1121








































http://www.reidsupply.com/Detail.aspx?itm=QK-20











http://www.reidsupply.com/Detail.aspx?itm=QA-1





http://www.reidsupply.com/Detail.aspx?itm=QN-1






Cla

mp

s an

d W

ork

ho

ldin

gGRIPPERS

Square EdgeSteel

Items RGHS-20 through RGHS-34 are counterbored for a sockethead cap screw and RGHS-35 through RGHS-53 are counter-bored for a low head socket cap screw.


A

B

D

C x Depth

Cat. No. A BC’Bore for x Depth

CChamfer

DTooth

PatternPrice Each

1-24RGHS-20 3/8 1/4 #6 x .146 1/16 x 45° Ex-Fine 8.96RGHS-21 3/8 1/4 #6 x .146 1/16 x 45° Super-Fine 9.28RGHS-22 3/8 3/8 #6 x .146 1/16 x 45° Ex-Fine 9.19RGHS-23 3/8 3/8 #6 x .146 1/16 x 45° Super-Fine 9.36RGHS-26 1/2 1/4 #8 x .170 3/32 x 45° Fine 10.74RGHS-27 1/2 1/4 #8 x .170 3/32 x 45° Ex-Fine 10.74RGHS-28 1/2 1/4 #8 x .170 3/32 x 45° Super-Fine 11.06RGHS-29 1/2 3/8 #8 x .175 3/32 x 45° Fine 11.00RGHS-30 1/2 3/8 #8 x .175 3/32 x 45° Ex-Fine 11.00RGHS-31 1/2 3/8 #8 x .175 3/32 x 45° Super-Fine 11.30RGHS-32 1/2 1/2 #8 x .175 3/32 x 45° Fine 11.26RGHS-33 1/2 1/2 #8 x .175 3/32 x 45° Ex-Fine 11.26RGHS-35 5/8 1/4 1/4 x .130 1/8 x 45° Fine 13.55RGHS-36 5/8 1/4 1/4 x .130 1/8 x 45° Ex-Fine 13.55RGHS-37 5/8 3/8 1/4 x .130 1/8 x 45° Fine 13.81RGHS-38 5/8 3/8 1/4 x .130 1/8 x 45° Ex-Fine 13.81RGHS-39 5/8 1/2 1/4 x .130 1/8 x 45° Fine 14.06RGHS-40 5/8 1/2 1/4 x .130 1/8 x 45° Ex-Fine 14.06RGHS-42 3/4 1/4 5/16 x .161 1/8 x 45° Fine 15.21RGHS-44 3/4 3/8 5/16 x .161 1/8 x 45° Fine 15.49RGHS-46 3/4 1/2 5/16 x .161 1/8 x 45° Fine 15.72RGHS-47 3/4 1/2 5/16 x .161 1/8 x 45° Ex-Fine 15.72RGHS-48 1 1/4 3/8 x .194 1/8 x 45° Fine 20.51RGHS-50 1 3/8 3/8 x .194 1/8 x 45° Fine 20.77RGHS-52 1 1/2 3/8 x .194 1/8 x 45° Fine 21.02RGHS-53 1 1/2 3/8 x .194 1/8 x 45° Ex-Fine 21.02

REST PADSSolid CarbideRound, Square and Rectangle

B

A C

A

A B


A

BRound Square Rectangle

Cat. No.

+.000/-.005

A

+.005/-.000

BTooth

Pattern

PriceEach1-24 Cat. No.

+.000/-.005

A

+.005/-.000

B CTooth

Pattern

PriceEach1-24

Round SquareRGCP-1 1/4 1/8 Ex-Fine 5.68 RGCP-9 1/2 1/8 — Fine 8.28RGCP-2 5/16 1/8 Ex-Fine 5.13 RGCP-1227 1/2 1/8 — Ex-Fine 8.28RGCP-1207 5/16 1/8 4 Point 5.83 RGCP-1229 5/8 1/8 — Ex-Fine 10.53RGCP-3 3/8 1/8 Fine 5.13 RGCP-11 3/4 5/32 — Ex-Fine 13.51RGCP-1211 3/8 1/8 Ex-Fine 5.13 RGCP-12 1 5/32 — Ex-Fine 20.00RGCP-1213 3/8 1/8 4 Point 5.13 RectangleRGCP-13 3/8 1/8 Flat 5.13 RGCP-1231 3/8 1/4 1/8 Ex-Fine 5.83RGCP-4 7/16 1/8 Fine 6.32 RGCP-1233 1/2 13/32 1/8 Fine 7.87RGCP-5 1/2 1/8 Fine 5.89 RGCP-1239 29/64 13/32 1/8 Fine 5.83RGCP-1215 1/2 1/8 Ex-Fine 5.89 RGCP-1245 1 1/2 3/16 Sawtooth 10.96RGCP-6 5/8 1/8 Fine 7.19 RGCP-1247 1 1/2 3/16 Ex-Fine 10.96RGCP-7 3/4 1/8 Fine 10.28 RGCP-1249 11/2 3/4 1/4 Sawtooth 21.06RGCP-1223 3/4 1/8 Ex-Fine 10.28RGCP-8 1 5/32 Ex-Fine 20.00

Tapped Hole Design

These tapped hole rest pads can be used with the swivel actionball units shown on page 169.

Steel and Delrin


A

C TAP

B

DTAP DEPTH

SteelCat. No.

DelrinCat. No.

Price Each 1-24A B C D Steel Delrin

RRP-2S RRP-2D 3/8 3/8 10-32 3/16 5.06 4.70RRP-4S RRP-4D 3/8 1/2 10-32 5/16 5.15 4.77RRP-6S — 1/2 3/8 10-32 3/16 5.36 —RRP-8S — 1/2 1/2 10-32 5/16 5.43 —RRP-10S RRP-10D 5/8 3/8 1/4-28 3/16 5.79 5.51RRP-12S — 5/8 1/2 1/4-28 5/16 5.85 —RRP-14S — 3/4 3/8 1/4-28 3/16 6.38 —RRP-16S — 3/4 1/2 1/4-28 5/16 6.45 —RRP-18S — 1 3/8 1/4-28 3/16 6.74 —RRP-20S RRP-20D 1 1/2 1/4-28 5/16 6.83 6.53

Carbide Tipped


EA

F TAP

B

.03

DC

CarbideTippedCat. No. A

+/- .001B C D E F

Price Each1-24

RRP-22 3/8 3/8 11/64 3/16 5/16 10-32 9.94RRP-24 3/8 1/2 15/64 3/16 5/16 10-32 10.11RRP-26 1/2 3/8 11/64 3/16 3/8 10-32 10.11RRP-28 1/2 1/2 15/64 3/16 3/8 10-32 10.23RRP-30 5/8 3/8 11/64 3/16 1/2 1/4-28 10.68RRP-36 3/4 1/2 15/64 3/16 5/8 1/4-28 12.57RRP-38 1 3/8 11/64 3/16 3/4 1/4-28 20.40

Whether you need to

Count on Reid to help you keep it all together.

Reid Has Your Workholding Supplies

Grip it,

Hold it,

Clamp it.

0168.qxd 2/22/2010 9:28 AM Page 168

http://www.reidsupply.com/Detail.aspx?itm=RGCP-1227













http://www.reidsupply.com/Detail.aspx?itm=RGHS-20
































http://www.reidsupply.com/Detail.aspx?itm=RRP-10S

http://www.reidsupply.com/Detail.aspx?itm=RRP-10D






















http://www.reidsupply.com/Detail.aspx?itm=RRP-22








Clam

ps an

d W

orkh

old

ing

SWIVEL ACTION GRIPPERS

Note: Swivel action grippers are self aligning (minimum 10°) to regularity of the work piece.

Ball Units

Hex Head Ball Unit

Consists of stainless steel ball with pocket area to accept areplaceable gripper and a socket head cap screw to hold thegripper in place. Ball is retained in the hex head housing by anO-ring that facilitates swiveling action and keeps contaminantsout. Housing is heat treated alloy steel. Grippers are notincluded in assembly and must be purchased separately.Any round style gripper or rest pad with a tapped hole can beused (carbide tipped, high speed steel, solid carbide or Delrin).See "D" dimension for gripper diameter to use. See pages 168and 170 for grippers and rest pads.


C - HEX

D GRIPPER DIA.

B A

E THREADF HEX SOC

REPLACEABLE PAD(MUST BE PURCHASED SEPARATELY)

1/8

+/-.005B

BallDia.

Price Each1-24Cat. No. A C D E F

RGBU-200 1/2 5/8 5/8 3/8 3/8-24 1/8 1/2 46.55RGBU-205 1 5/8 5/8 3/8 3/8-24 1/8 1/2 47.28RGBU-210 11/2 5/8 5/8 3/8 3/8-24 1/8 1/2 48.32RGBU-215 1/2 5/8 5/8 3/8 3/8-16 1/8 1/2 46.55RGBU-220 1 5/8 5/8 3/8 3/8-16 1/8 1/2 47.28RGBU-225 11/2 5/8 5/8 3/8 3/8-16 1/8 1/2 48.32RGBU-230 1 3/4 13/16 1/2 1/2-20 3/16 5/8 50.43RGBU-235 11/2 3/4 13/16 1/2 1/2-20 3/16 5/8 51.49RGBU-240 1 3/4 13/16 1/2 1/2-13 3/16 5/8 50.43RGBU-245 11/2 3/4 13/16 1/2 1/2-13 3/16 5/8 51.49RGBU-255 2 13/16 15/16 5/8 5/8-18 1/4 3/4 54.32RGBU-260 1 13/16 15/16 5/8 5/8-11 1/4 3/4 52.55RGBU-265 2 13/16 15/16 5/8 5/8-11 1/4 3/4 54.32RGBU-270 1 7/8 11/8 3/4 3/4-16 5/16 7/8 56.79RGBU-275 21/2 7/8 11/8 3/4 3/4-16 5/16 7/8 58.55RGBU-280 1 7/8 11/8 3/4 3/4-10 5/16 7/8 56.79RGBU-285 21/2 7/8 11/8 3/4 3/4-10 5/16 7/8 58.55RGBU-1307 4 1 11/2 1 1-14 3/8 11/8 69.74RGBU-1309 2 1 11/2 1 1-8 3/8 11/8 67.23RGBU-1311 4 1 11/2 1 1-8 3/8 11/8 69.74

Base Ball Unit

Discount 14 applies.+/-.005

B+/-.010

EBallDia.

Price Each1-24Cat. No. A C D F

RGBU-300 5/8 7/8 3/4 3/8 .24 1/4-28 1/2 37.66RGBU-305 13/16 1 7/8 1/2 .35 5/16-24 5/8 41.43RGBU-310 15/16 1 7/8 5/8 .28 3/8-24 3/4 44.17RGBU-315 11/8 11/16 15/16 3/4 .26 1/2-20 7/8 49.72RGBU-1315 11/2 13/8 11/4 1 .44 1/2-20 11/8 59.98

Threaded Ball Unit

Discount 14 applies.BallDia.

Price EachCat. No. A B C D 1-24RGBU-410 1 3/4-10 3/8 3/8 1/2 39.04RGBU-415 2 3/4-10 3/8 3/8 1/2 40.06RGBU-1322 3 3/4-10 3/8 3/8 1/2 42.32RGBU-1324 2 1-14 3/8 5/8 3/4 48.32RGBU-1326 3 1-14 3/8 5/8 3/4 49.72

Ball Assemblies

Hex Head Ball Assemblies

These assemblies are similar to the ball units, however, the padand ball are one unit and included with the assemblies. The padsare available in high speed steel, (serrated or flat) and delrin (flatonly). The ball is replaceable and available as a special order.Please call for price and delivery.


Serrated Flat

Base Ball Assemblies


Serrated Flat

Cat. No. Type A+/-.005

B+/-.010

C D EPrice Each

1-24RGBA-44S Serrated 1/2 9/16 5/32 5/16 10-32 30.13RGBA-44F Flat 1/2 9/16 5/32 5/16 10-32 28.06RGBA-46S Serrated 1/2 11/16 5/8 5/16 10-32 31.51

Threaded Ball Assemblies


Cat. No. Type A B C DPrice Each

1-24RGBA-50S Serrated 3/8-24 1/2 3/16 5/32 27.19RGBA-52S Serrated 3/8-24 1 3/16 5/32 27.45RGBA-54S Serrated 3/8-24 2 3/16 5/32 27.94RGBA-60S Serrated 3/8-16 1 3/16 5/32 27.45RGBA-62S Serrated 3/8-16 2 3/16 5/32 27.94RGBA-64S Serrated 3/8-16 3 3/16 5/32 29.13RGBA-66S Serrated 1/2-20 1 1/4 1/4 28.96RGBA-70S Serrated 1/2-20 3 1/4 1/4 32.11RGBA-72S Serrated 1/2-13 1 1/4 1/4 28.96RGBA-74S Serrated 1/2-13 2 1/4 1/4 29.57RGBA-76S Serrated 1/2-13 3 1/4 1/4 31.17RGBA-78S Serrated 5/8-18 1 5/16 5/16 32.19RGBA-86S Serrated 5/8-11 2 5/16 5/16 32.87

Cat. No. Type A+/-.005

B C D EPrice Each

1-24RGBA-6S Serrated 3/8 5/16 1/2 5/32 10-32 30.83RGBA-10S Serrated 7/16 3/8 1/2 1/4 1/4-20 32.68RGBA-12S Serrated 7/16 3/8 1 1/4 1/4-20 33.28RGBA-14S Serrated 7/16 3/8 11/2 1/4 1/4-20 33.89RGBA-16S Serrated 7/16 3/8 1/2 1/4 1/4-28 32.68RGBA-22S Serrated 1/2 7/16 1/2 5/16 5/16-18 36.30RGBA-24S Serrated 1/2 7/16 1 5/16 5/16-18 36.98RGBA-26S Serrated 1/2 7/16 11/2 5/16 5/16-18 37.66RGBA-28S Serrated 1/2 7/16 1/2 5/16 5/16-24 36.30RGBA-10F Flat 7/16 3/8 1/2 1/4 1/4-20 30.83RGBA-22F Flat 1/2 7/16 1/2 5/16 5/16-18 34.23RGBA-24F Flat 1/2 7/16 1 5/16 5/16-18 34.94RGBA-30F Flat 1/2 7/16 1 5/16 5/16-24 34.94RGBA-26D Delrin 1/2 7/16 11/2 5/16 5/16-18 34.57

0169.qxd 2/23/2010 12:53 PM Page 169

http://www.reidsupply.com/Detail.aspx?itm=RGBU-1307






























http://www.reidsupply.com/Detail.aspx?itm=RGBA-44S

http://www.reidsupply.com/Detail.aspx?itm=RGBA-44F



























http://www.reidsupply.com/Detail.aspx?itm=RGBA-26D



Cla

mp

s an

d W

ork

ho

ldin

gGRIPPERS

Eliminates costly maintenance and chuck jaw replacement. After long periods of maintenance-free serviceFairlane inserts can be quickly replaced at low cost. Replacement can be accomplished right at themachine without costly downtime. Applicable to most chuck jaw designs. Held in place either by beingthreaded (to be held by screws entered through jaw), or flat on side to be held by set screw pressure. Steeltype are made from hardened tool steel.

SteelRound B

.03 X 45¡

A

DTap

EC

.03A

.130

DTap

B

.06


DTAP BLIND

COR. BREAK

A .188B

w/Keyway

+.000/-.005

A

+.000/-.005

B

ThruHole

DCat. No. C ETooth

PatternPrice Each

1-24RGHS-00 1/4 3/8 — 8-32 — Ex-Fine 7.68RGHS-0 3/8 3/8 11/64 10-32 3/16 Ex-Fine 7.55RGHS-210 3/8 1/2 15/64 10-32 3/16 Ex-Fine 7.83RGHS-1 1/2 3/8 11/64 10-32 3/16 Fine 7.89RGHS-215 1/2 3/8 11/64 10-32 3/16 Ex-Fine 7.89RGHS-220 1/2 1/2 15/64 10-32 3/16 Coarse 8.17RGHS-225 1/2 1/2 Keyway 10-32 — Fine 8.38RGHS-2 1/2 1/2 15/64 10-32 3/16 Fine 8.17RGHS-235 1/2 1/2 15/64 10-32 3/16 Ex-Fine 8.17RGHS-240 1/2 .651 19/64 10-32 3/16 Fine 8.17RGHS-3 5/8 3/8 11/64 1/4-28 3/16 Fine 10.77RGHS-250 5/8 3/8 11/64 1/4-28 3/16 Ex-Fine 10.77RGHS-260 5/8 3/8 11/64 1/4-28 3/16 Coarse 10.77RGHS-265 5/8 1/2 15/64 1/4-28 3/16 Fine 11.02RGHS-275 5/8 1/2 15/64 1/4-28 3/16 Coarse 11.02RGHS-4 3/4 3/8 11/64 1/4-28 3/16 Fine 11.87RGHS-285 3/4 3/8 11/64 1/4-28 3/16 Ex-Fine 11.87RGHS-290 3/4 3/8 11/64 1/4-28 3/16 Coarse 11.87RGHS-295 3/4 1/2 15/64 1/4-28 3/16 Fine 12.30RGHS-300 3/4 1/2 15/64 1/4-28 3/16 Ex-Fine 12.30RGHS-305 3/4 1/2 15/64 1/4-28 3/16 Coarse 12.30RGHS-315 1 3/8 11/64 1/4-28 3/16 Coarse 14.38RGHS-41 1 3/8 11/64 1/4-28 3/16 Fine 14.38RGHS-330 1 3/8 11/64 1/4-28 3/16 Ex-Fine 14.38RGHS-335 1 1/2 15/64 1/4-28 3/16 Coarse 14.81RGHS-345 1 1/2 15/64 1/4-28 3/16 Fine 14.81RGHS-350 1 1/2 15/64 1/4-28 3/16 Ex-Fine 14.81

SteelSquare


A

A

B

DTap

+.000/-.005

A

+.000/-.005

B

PriceEach1-24

+.000/-.005

A

+.000/-.005

B


DTap

ToothPattern Cat. No.

DTap

ToothPattern

RGHS-360 3/8 3/8 10-32 Ex-Fine 8.32 RGHS-400 3/4 3/8 10-32 Coarse 14.38RGHS-5 1/2 3/8 10-32 Fine 10.40 RGHS-405 3/4 1/2 10-32 Fine 15.02RGHS-370 1/2 3/8 10-32 Ex-Fine 10.40 RGHS-410 3/4 1/2 10-32 Ex-Fine 15.02RGHS-375 1/2 1/2 10-32 Fine 10.62 RGHS-415 3/4 1/2 10-32 Coarse 15.02RGHS-380 1/2 1/2 10-32 Ex-Fine 10.62 RGHS-7 1 3/8 1/4-28 Fine 20.11RGHS-385 1/2 3/8 10-32 Coarse 10.40 RGHS-420 1 3/8 1/4-28 Ex-Fine 20.11RGHS-390 1/2 1/2 10-32 Coarse 10.62 RGHS-425 1 3/8 1/4-28 Coarse 20.11RGHS-6 3/4 3/8 10-32 Fine 14.38 RGHS-430 1 1/2 1/4-28 Fine 20.66RGHS-395 3/4 3/8 10-32 Ex-Fine 14.38

SteelAngle Grip

For use on N.A. Woodworth ball lock chuck.


A

.65+.000-.010

C TapB

.60

+.000/-.002

A

+.000/-.005

B

PriceEach1-24

+.000/-.002

A

+.000/-.005

B


CTap


CTap

ToothPattern

RGHS-127-4 .562 .375 10-32 4 Point 10.11 RGHS-560 .562 .375 10-32 Angular 11.30RGHS-127-12 .562 .375 10-32 Fine 10.11 RGHS-128-4 .750 .500 1/4-28 4 Point 20.96

Solid CarbideRound and Square

Discount 14 applies.+.000/-.005

A

+.000/-.005

BCat. No.TapC D E F

ToothPattern

Price Each1-24

RoundRGSC-1 1/2 3/8 11/64 10-32 3/16 3/16 Fine 15.13RGSC-1270 1/2 1/2 15/64 10-32 3/16 5/16 4 Point 16.74RGSC-2 1/2 1/2 15/64 10-32 3/16 5/16 Fine 16.74RGSC-3 5/8 3/8 11/64 1/4-28 3/16 3/16 Fine 21.77RGSC-4 3/4 3/8 11/64 1/4-28 3/16 3/16 Fine 26.83SquareRGSC-5 1/2 3/8 — 10-32 — 3/16 Fine 20.74RGSC-6 1/2 1/2 — 10-32 — 5/16 Fine 21.94

Carbide TippedRound

.130EA

FTap

B

.06


EA

FTap

BDC

.03

w/ Keyway

+.000/-.005

A

+.000/-.005

B

Blind HoleTapFCat. No. C D E

ToothPattern

Price Each1-24

RG-0 3/8 3/8 11/64 3/16 5/16 10-32 Ex-Fine 8.09RG-200 3/8 1/2 15/64 3/16 5/16 10-32 Ex-Fine 8.21RG-2 1/2 1/2 15/64 3/16 3/8 10-32 Fine 8.06RG-202 1/2 1/2 15/64 3/16 3/8 10-32 Ex-Fine 8.06RG-204 1/2 1/2 15/64 3/16 3/8 10-32 4 Point 8.06RG-1 1/2 3/8 11/64 3/16 3/8 10-32 Fine 7.70RG-230 1/2 3/8 11/64 3/16 3/8 10-32 Ex-Fine 7.70RG-206 1/2 3/8 11/64 3/16 3/8 10-32 4 Point 7.70RG-208 1/2 .651 19/64 3/16 3/8 10-32 Fine 8.06RG-210 1/2 .651 19/64 3/16 3/8 10-32 Ex-Fine 8.06RG-3 5/8 3/8 11/64 3/16 1/2 1/4-28 Fine 9.30RG-234 5/8 3/8 11/64 3/16 1/2 1/4-28 Ex-Fine 9.30RG-218 5/8 1/2 15/64 3/16 1/2 1/4-28 Fine 10.11RG-224 5/8 5/8 Keyway — 1/2 1/4-28 Fine 14.74RG-4 3/4 3/8 11/64 3/16 5/8 1/4-28 Fine 10.96RG-236 3/4 3/8 11/64 3/16 5/8 1/4-28 Ex-Fine 10.96RG-222 3/4 1/2 15/64 3/16 5/8 1/4-28 Fine 11.77RG-238 3/4 1/2 15/64 3/16 5/8 1/4-28 Ex-Fine 11.77RG-41 1 3/8 11/64 3/16 3/4 1/4-28 Fine 18.49RG-240 1 3/8 11/64 3/16 3/4 1/4-28 Ex-Fine 18.49

Carbide TippedSquare


EA

A

FTap

B

+.000/-.005

A

+.000/-.005

B

Blind HoleTapFCat. No. E

ToothPattern

Price Each1-24

RG-5 1/2 3/8 13/32 10-32 Fine 11.21RG-250 1/2 3/8 13/32 10-32 Ex-Fine 11.21RG-255 1/2 1/2 13/32 10-32 Fine 12.09

Carbide TippedAngle Grip


A

.65+.000-.010

D

C TapB

.60

Blind Hole Tap

CCat. No.+.000/-.005

A+.000/-.005

B D Tooth PatternPrice Each

1-24RG-270 .562 .375 10-32 15/32 4 Point 9.38RG-275 .562 .375 10-32 15/32 Fine 9.38

SteelRound and Squarew/ Counterbore

*Socket head cap screw


BA

A

+.000/-.005

A

+.000/-.005

B

PriceEach1-24

+.000/-.005

A

+.000/-.005

B


C’Bore*to Fit


C’Bore*to Fit

ToothPattern

RoundRGHS-2405 1/2 3/8 #8 Fine 8.09 RGHS-2475 1 1/2 1/4 Coarse 15.36RGHS-2410 1/2 3/8 #8 Ex-Fine 8.09 RGHS-81 1 1/2 1/4 Fine 15.36RGHS-2415 1/2 1/2 #8 Fine 8.43 RGHS-2480 1 1/2 1/4 Ex-Fine 15.36RGHS-2420 1/2 1/2 #8 Ex-Fine 8.43 SquareRGHS-2425 5/8 3/8 #8 Fine 11.09 RGHS-2485 1/2 3/8 #10 Fine 10.77RGHS-2430 5/8 3/8 #8 Ex-Fine 11.09 RGHS-2490 1/2 3/8 #10 Ex-Fine 10.77RGHS-2435 5/8 1/2 #8 Fine 11.38 RGHS-2495 1/2 1/2 #10 Fine 11.02RGHS-2440 5/8 1/2 #8 Ex-Fine 11.38 RGHS-82 3/4 1/2 1/4 Fine 15.36RGHS-2445 3/4 3/8 #10 Fine 12.43 RGHS-2505 3/4 1/2 1/4 Ex-Fine 15.36RGHS-80 3/4 1/2 #10 Fine 12.77 RGHS-2510 3/4 1/2 1/4 Coarse 15.36RGHS-2455 3/4 1/2 #10 Ex-Fine 12.77 RGHS-83 1 1/2 1/4 Fine 20.66RGHS-2460 3/4 3/8 #10 Coarse 12.43 RGHS-2515 1 1/2 1/4 Ex-Fine 20.66RGHS-2470 3/4 1/2 #10 Coarse 12.77 RGHS-2520 1 1/2 1/4 Coarse 20.66

0170.qxd 2/17/2010 3:21 PM Page 170

http://www.reidsupply.com/Detail.aspx?itm=RGHS-127-12



http://www.reidsupply.com/Detail.aspx?itm=RGSC-1270













































































http://www.reidsupply.com/Detail.aspx?itm=RG-200


























Clam

ps an

d W

orkh

old

ing

PriceEach1-24

ToothPatternHexDCBACat. No.

GRIPPERSEliminates costly maintenance and chuck jaw replacement. After long periods of maintenance-free service,Fairlane inserts can be quickly replaced at low cost. Replacement can be accomplished right at the machine,without costly downtime. Applicable to most chuck jaw designs. Held in place either by being threaded (to beheld by screws entered through jaw), or flat on side to be held by set screw pressure. Steel type are madefrom hardened tool steel.

Carbide TippedAdjustable


B

AD

C Hex

Socket Type

Cat. No. A B C D HexTooth

Pattern

PriceEach1-24

Socket TypeRG-1000 1/2 1/4 3/8-24 .05 3/16 Ex-Fine 12.85RG-1002 1 1/4 3/8-24 .05 3/16 Ex-Fine 13.00RG-1004 11/2 1/4 3/8-24 .05 3/16 Ex-Fine 13.13RG-1006 2 1/4 3/8-24 .05 3/16 Ex-Fine 13.28RG-1010 1/2 1/4 3/8-16 .05 3/16 Ex-Fine 12.85RG-30 1 1/4 3/8-16 .05 3/16 Ex-Fine 13.00RG-1012 2 1/4 3/8-16 .05 3/16 Ex-Fine 13.28RG-1014 3 1/4 3/8-16 .05 3/16 Ex-Fine 13.70RG-1016 1 3/8 1/2-20 .05 1/4 Fine 12.00RG-1018 1 3/8 1/2-20 .05 1/4 Ex-Fine 12.00RG-1020 1 3/8 1/2-20 .07 1/4 4 Point 12.00RG-1022 2 3/8 1/2-20 .05 1/4 Fine 12.43RG-1024 2 3/8 1/2-20 .05 1/4 Ex-Fine 12.43RG-1026 2 3/8 1/2-20 .07 1/4 4 Point 12.43RG-1028 3 3/8 1/2-20 .05 1/4 Fine 12.85RG-31 1 3/8 1/2-13 .05 1/4 Fine 12.00RG-1034 1 3/8 1/2-13 .05 1/4 Ex-Fine 12.00RG-1036 1 3/8 1/2-13 .07 1/4 4 Point 12.00RG-32 2 3/8 1/2-13 .05 1/4 Fine 12.43RG-1038 2 3/8 1/2-13 .05 1/4 Ex-Fine 12.43RG-1040 2 3/8 1/2-13 .07 1/4 4 Point 12.43RG-1042 3 3/8 1/2-13 .05 1/4 Fine 12.85RG-1044 3 3/8 1/2-13 .05 1/4 Ex-Fine 12.85RG-1048 1 1/2 5/8-18 .05 5/16 Fine 13.13RG-33 1 7/16 5/8-11 .05 5/16 Fine 13.13RG-34 2 7/16 5/8-11 .05 5/16 Fine 13.64RG-1080 3 7/16 5/8-11 .05 5/16 Fine 14.11RG-1086 1 1/2 3/4-16 .05 3/8 Fine 14.26RG-1092 2 1/2 3/4-16 .05 3/8 Fine 14.66RG-35 1 1/2 3/4-10 .05 3/8 Fine 14.26RG-1104 1 1/2 3/4-10 .05 3/8 Ex-Fine 14.26


C

D

B A

E

Hex Type


DC

Flats F

BA

Hex

E

Wrench Flats Type

Cat. No. A B C D E F HexTooth

Pattern

PriceEach1-24

Wrench Flats TypeRG-750 .937 9/16 .500 3/8 3/8-24 .15 1/8 Fine 16.77RG-752 .937 9/16 .500 3/8 3/8-24 .15 1/8 Ex-Fine 16.77RG-754 1.375 1 .500 3/8 3/8-24 .15 1/8 Fine 17.11RG-756 1.375 1 .500 3/8 3/8-24 .15 1/8 Ex-Fine 17.32RG-770 .937 9/16 .500 3/8 3/8-16 .15 1/8 Fine 16.77RG-100 1.375 1 .500 3/8 3/8-16 .15 1/8 Fine 17.11RG-776 1.875 11/2 .500 3/8 3/8-16 .15 1/8 Fine 17.32RG-780 1.375 7/8 .625 1/2 1/2-20 .25 3/16 Fine 17.11RG-784 2.062 11/2 .625 1/2 1/2-20 .25 3/16 Fine 17.47RG-101 1.375 7/8 .625 1/2 1/2-13 .25 3/16 Fine 17.11RG-796 2.562 2 .750 5/8 5/8-18 .25 1/4 Fine 17.83RG-102 2.062 11/2 .625 1/2 1/2-13 25 3/16 Fine 17.47RG-800 1.562 1 .750 5/8 5/8-11 .25 1/4 Fine 17.47RG-103 2.562 2 .750 5/8 5/8-11 .25 1/4 Fine 17.83RG-804 2.562 2 .750 5/8 5/8-11 .25 1/4 Ex-Fine 17.83RG-814 1.562 1 .875 3/4 3/4-10 .25 5/16 Fine 19.21RG-818 3.062 21/2 .875 3/4 3/4-10 .25 5/16 Fine 19.57

Cat. No. A B C D HexTooth

Pattern

PriceEach1-24

Hex TypeRG-825 1/2 13/64 7/16 5/16 1/4-20 Ex-Fine 6.98RG-20 1 13/64 7/16 5/16 1/4-20 Ex-Fine 7.13RG-827 11/2 13/64 7/16 5/16 1/4-20 Ex-Fine 7.26RG-829 1/2 13/64 7/16 5/16 1/4-28 Ex-Fine 6.98RG-831 1 13/64 7/16 5/16 1/4-28 Ex-Fine 7.13RG-835 1/2 1/4 1/2 3/8 5/16-18 Fine 7.19RG-837 1/2 1/4 1/2 3/8 5/16-18 Ex-Fine 7.19RG-21 1 1/4 1/2 3/8 5/16-18 Fine 7.34RG-839 1 1/4 1/2 3/8 5/16-18 Ex-Fine 7.34RG-841 11/2 1/4 1/2 3/8 5/16-18 Fine 7.47RG-843 11/2 1/4 1/2 3/8 5/16-18 Ex-Fine 7.47RG-845 1/2 1/4 1/2 3/8 5/16-24 Fine 7.19RG-847 1/2 1/4 1/2 3/8 5/16-24 Ex-Fine 7.19RG-849 1 1/4 1/2 3/8 5/16-24 Fine 7.34RG-851 1 1/4 1/2 3/8 5/16-24 Ex-Fine 7.34RG-853 11/2 1/4 1/2 3/8 5/16-24 Fine 7.47RG-857 1/2 9/32 9/16 1/2 3/8-24 Fine 8.23RG-861 1 9/32 9/16 1/2 3/8-24 Fine 8.38RG-863 1 9/32 9/16 1/2 3/8-24 Ex-Fine 8.38RG-865 11/2 9/32 9/16 1/2 3/8-24 Fine 8.66RG-869 1/2 9/32 9/16 1/2 3/8-16 Fine 8.23RG-871 1/2 9/32 9/16 1/2 3/8-16 Ex-Fine 8.23RG-22 1 9/32 9/16 1/2 3/8-16 Fine 8.38RG-873 1 9/32 9/16 1/2 3/8-16 Ex-Fine 8.38RG-23 11/2 9/32 9/16 1/2 3/8-16 Fine 8.66RG-875 11/2 9/32 9/16 1/2 3/8-16 Ex-Fine 8.66RG-877 1 23/64 3/4 5/8 1/2-20 Fine 10.49RG-879 1 23/64 3/4 5/8 1/2-20 Ex-Fine 10.49RG-881 11/2 23/64 3/4 5/8 1/2-20 Fine 10.83RG-24 1 23/64 3/4 5/8 1/2-13 Fine 10.49

Hex Type (continued)RG-885 1 23/64 3/4 5/8 1/2-13 Ex-Fine 10.49RG-25 11/2 23/64 3/4 5/8 1/2-13 Fine 10.83RG-887 11/2 23/64 3/4 5/8 1/2-13 Ex-Fine 10.83RG-889 1 7/16 15/16 3/4 5/8-18 Fine 13.64RG-26 1 7/16 15/16 3/4 5/8-11 Fine 13.64RG-27 2 7/16 15/16 3/4 5/8-11 Fine 13.98RG-901 1 1/2 11/8 1 3/4-16 Ex-Fine 23.04RG-903 21/2 1/2 11/8 1 3/4-16 Ex-Fine 23.74

Steel - Adjustable


A

B

Hex

PriceEach1-24

PriceEach1-24Cat. No. A B Hex

ToothPattern Cat. No. A B Hex

ToothPattern

RGHS-600 1 3/8-24 1/8 Ex-Fine 11.60 RGHS-91 11/2 1/2-13 3/16 Fine 12.21RGHS-605 11/2 3/8-24 1/8 Ex-Fine 12.21 RGHS-615 11/2 5/8-18 1/4 Fine 13.62RGHS-90 11/2 3/8-16 1/8 Ex-Fine 12.21 RGHS-92 11/2 5/8-11 1/4 Fine 13.62RGHS-610 11/2 1/2-20 3/16 Fine 12.21 RGHS-93 11/2 3/4-10 5/16 Fine 14.66

Adjustagrip™ - Steel

Note: All Adjustagrips™ come with differential screws. Grippers must bepurchased separately. Reference “D” dimension for gripper.


E

C

H A

Hex

B F TapD Gripper

ThreadB

GripperD*

Price Each1-24Cat. No. A C E F Hex H

RGHS-101 1 1/2-13 .500 RGHS-1 11/16 10-32LH 3/16 .625 16.09RGHS-102 11/2 1/2-13 .500 RGHS-1 11/16 10-32LH 3/16 .625 16.30*See page 170 for grippers

CHUCK JAW GRIPPERSBlind Hole

Simply drill, tap and install. These blind hole grippers make iteasy to modify soft top jaws, strap clamps or fixtures. Gripperscan be installed from one side using a combination center drill,tap and wrench, eliminating the need to drill through holes.Hardened steel grippers are case hardened with black oxidefinish. Carbide tipped grippers have cadmium plated finish.

FineSerrated

Pointed CarbideTipped

Hardened Steel Grippers


SerratedCat. No.

PointedCat. No.

HexA

ThreadE

CenterDrill

Drillto Dia.

Price Each1-24

B C D Serrated PointedJRG-23801 JRG-23811 5/16 .093 .32 .19 8-32 No. 4 .310 12.10 10.01JRG-23802 JRG-23812 1/2 .125 .46 .25 1/4-28 No. 6 .498 12.44 10.25JRG-23803 JRG-23813 3/4 .187 .70 .38 3/8-16 No. 8 .745 14.06 12.27

Carbide Tipped Grippers

Discount 14 applies.HexA

ThreadE

CenterDrill

Drillto Dia.

Price EachCat. No. B C D 1-24JRG-23822 1/2 .125 .46 .25 1/4-28 No. 6 .498 19.57JRG-23823 3/4 .187 .70 .38 3/8-16 No. 8 .745 23.45

0171.qxd 2/17/2010 3:21 PM Page 171



































































































http://www.reidsupply.com/Detail.aspx?itm=JRG-23801









Cla

mp

s an

d W

ork

ho

ldin

gINDUSTRIAL VISES

Machinists’ Vises

Built for performance and endurance. Stress parts are 60,000 psi ductile iron. Hardened steeljaw. Replaceable inserts are serrated for safe, sure grip. Straight line design - horizontalspindle and nut eliminate thread wear. Swivel base allows for 360° rotation and has doublelockdowns for non-slip holding and four mounting points.

JawWidth

Max.Opening

ThroatDepth

ShippingWeightCat. No. Description Price Each

WLT-25 4 61/2 31/2 Swivel Base 62 568.00

High Visibility Safety Vise

Coated in high visibility yellow which conforms to OSHA safety color standard. Heavy dutycasting, 30,000 psi. Replaceable hardened steel jaw inserts and replaceable pipe jaws toprovide sure grip for a variety of work holding applications. 360° swivel base.

JawWidth

MaxOpening

PipeCapacity

ShippingWgt. (Lbs.)

PriceEachCat. No.

WLT-110 5 51/4 1/4-21/2 50 224.00WLT-115 6 53/4 1/4-31/2 64 272.00

Combination Pipe and Bench Vises

Built for the toughest applications. 60,000 psi tensile ductile iron body parts for mass andstrength. Replaceable hardened steel jaw inserts. Self centering pipe jaws. Locking swivelbase with double lockdowns for non-slip hold in any position. Enclosed construction keepslubrication in and contaminants out for outdoor use.

JawWidth

MaxOpening

PipeCapacity

ThroatDepth

ShippingWgt. (Lbs.)

PriceEachCat. No.

WLT-130 41/2 6 1/8-31/2 43/4 77 840.00

Tradesman Vise

For general purpose service or maintenance shops not requiring the strength of a combina-tion vise. 60,000 psi ductile iron body parts hardened steel top and pipe jaws. Base swivels.

JawWidth

MaxOpening

Pipe JawCapacity

ThroatDepth

ShippingWgt. (Lbs.)

PriceEachCat. No.

WLT-150 41/2 4 1/4-21/2 31/4 33 376.00WLT-155 51/2 5 1/4-3 33/4 49 456.00WLT-160 61/2 61/2 1/4-31/2 4 70 512.00WLT-165 8 7 1/8-31/2 43/4 105 784.00

Utility Workshop Vise

A versatile all-around vise. Features a formed steel channel beam and a hefty 30,000 psi bodycasting. Replaceable, serrated steel top jaws and built in pipe jaws. 180° locking swivel base.

JawWidth

MaxOpening

ThroatDepth

PipeCapacity

ShippingWgt. (Lbs.)

PriceEachCat. No.

WLT-180 41/2 4 31/2 1/8-2 171/2 80.00WLT-185 51/2 5 4 1/8-21/2 30 104.00WLT-190 61/2 51/2 5 1/8-21/2 40 136.00WLT-195 6 6 6 1/8-3 66 200.00WLT-200 8 71/2 8 1/8-3 80 248.00

Mechanics’ Vise

This vise has a swivel base that rotates 365° with double lockdowns ensuing maximumstability. The powder coat paint resists scratches and provides a tough, durable finish. It alsofeatures replaceable hardened steel top and pipe jaws and a large anvil work surface.

JawWidth

JawOpening

ThroatDepth

PipeCapacity

PriceEachCat. No.

WLT-746 6 53/4 41/8 1/4-31/2 272.00

0172.qxd 2/17/2010 3:22 PM Page 172

http://www.reidsupply.com/Detail.aspx?itm=WLT-110















Clam

ps an

d W

orkh

old

ing

VISE ACCESSORIESCopper Jaw Caps

Designed to fit any size vise to avoid marring the surface of softermetals and to protect jaw faces. They have polished faces andpliable copper extensions to fit on any make of vise. Sold in pairs.

Cat. No.Jaw

WidthPrice

per PairWLT-385 31/2 32.00WLT-390 4 35.20WLT-395 41/2 40.00WLT-400 5 51.20WLT-405 6 78.40

Magnefix Jaw Caps

Designed to protect both the vise jaws and the work piece from marring and distortion. Constructed from hardened aluminum alloy withtwo built-in circular magnets on the back side which hold the caps securely on the vise. They are right-angled and surface-parallel to fitany vise type including machine and bench type. Sold in pairs.

Standard Fiber Prism Rubber

SOFT JAWS™ MAGNETIC JAW CAPS

Soft polyurethane protects work from damage. Impervious tosolutions and chemicals. Caps come in vibrant colors andremains soft in hot or cold environments. Strong magnets holdcaps in place. C-45 and C-60 are smooth but drillable for round orspecial applications. The C-40 and WLT-60 are grooved for roundor tube applications. Sold in pairs.

Smooth

Grooved

Cat. No. Style Width Color Price per PairC-45 Smooth 41/2 Orange 10.19C-40 Grooved 41/2 Yellow 10.19C-60 Smooth 6 Green 12.19WLT-60 Grooved 59/16 Yellow 12.00

UNIVERSAL WORK POSITIONER

This all purpose, all position workholding fixture allows you tomove your workpiece to any position, eliminating the need forelaborate setups with clamps, vises, angle plates, etc. It ismachined from 6061-T6 aluminum (no castings) and has beenhardcoated, adding wear resistance to the work surface andthreaded mounting holes. Allows spherical movement of 180° anda table rotation of a full 360°. Only one torque setting is requiredper setup. Excellent for soldering, welding, brazing, assembly,model making, electronic device mounting, etc.

TableSize

MountingHoles

BaseSize

WorkLoad (Lbs.)

PriceEachCat. No. Height

WP-4 4 x 4 x 3/8 48 (1/4-20) 11/2 x 11/2 x 1/4 10 37/8 139.67

QUICK ADJUSTING PUSH BUTTONSTOP NUTS

Allows quick and accurate adjustments of stop settings. Used withexisting stop screws and fits all imported or domestic millingmachines. To operate, simply depress the button and slide the nutto the desired position. Releasing the nut locks it into position andthen turning the nut gives you .001” micrometer adjustments.Saves hours of time and is easy to use. Available in steel oraluminum construction. Steel (pictured) has standard housing andaluminum has tapered housing.

Price Each1-4

Price Each1-4Cat. No. Thread OD OAH Cat. No. Thread OD OAH

Steel - Standard Housing Aluminum - Tapered HousingQAN-1 1/2-20 11/2 1 47.25 QAN-4 1/2-20 11/2 1 30.15QAN-3 1/2-13 11/2 1 50.85 QAN-5 1/2-13 11/2 1 30.15

QUILL STOPSClip-On

Each stop is assembled, faced off, and then drilled and tapped.Made in U.S. Quick action clipping for fast installation andremoval. Easily positioned with positive locking action. Sturdyaluminum knobs.Cat. No. Description Price EachCQS-5 1/2-20 Threads For Mills 19.88

Standard Fiber Prism RubberJaw

Width Cat. No.Price

per Pair Cat. No.Price



per Pair4 WLT-435 32.00 WLT-465 35.20 WLT-495 36.80 WLT-525 35.20

41/2 WLT-440 33.60 — — WLT-500 38.40 — —5 WLT-445 33.60 — — WLT-505 38.40 WLT-535 36.806 WLT-450 36.80 — — WLT-510 40.00 WLT-540 38.40

0173.qxd 2/17/2010 3:23 PM Page 173

http://www.reidsupply.com/Detail.aspx?itm=QAN-1























http://www.reidsupply.com/Detail.aspx?itm=CQS-5

http://www.reidsupply.com/Detail.aspx?itm=C-45






http://www.reidsupply.com/Detail.aspx?itm=WP-4


Cla

mp

s an

d W

ork

ho

ldin

gPRECISION VISES

Three Way Tilting Machine Vises

• Perfect vise for three axis jobs in milling, drilling, shaping and jigboring

• Made of close-grained high tensile cast iron• Jaw plates are hardened and ground• 360° swivel base• Accurately indexed for three way angular work• 45° tilting range on either side• 90° vertical indexing• Bases have keyways and bolt slots for machine mounting

Cat. No.Jaw

WidthJaw

OpeningJaw

DepthWgt.Lbs.

PriceEach

WLT-1200 3 3 15/16 24 576.00WLT-1205 4 4 19/16 46 720.00

Toolmaker’s Vise

• Made from specially selected alloy steel• Precision ground square and parallel to .0002”• Heat treated for hardness• Completely stress relieved

JawWidth

JawOpening

JawDepth

Wgt.Lbs.

PriceEachCat. No.

WLT-1210 23/4 3 19/16 11 448.00

Toolmaker’s Screwless Vises

• All steel body uses rapid positioning notches to obtain positivedownward clamping force

• Horizontal and vertical vees in sliding jaws hold workpiecessecurely and accurately

• Squareness and parallelism to within .0003”Jaw

WidthJaw

OpeningJaw

DepthWgt.Lbs.

PriceEachCat. No.

WLT-1215 2 31/8 1 8 216.00WLT-1220 3 33/4 13/8 11 304.00

Self Centering Vise

• Used on milling and drilling machines where quick centering isrequired

• Automatically adjusts workpiece to its center• Made of close-grained cast iron• Swivel base provides positive locking mechanism that adjusts

through 360°• Opposite threads for quick, accurate centering

JawWidth

JawOpening

JawDepth

Wgt.Lbs.

PriceEachCat. No.

WLT-1235 4 4 11/2 32 448.00

VISES

90° Angle Vise Clamp

Takes the work out of applicationsthat involve holding materials forright angle joining, assembling,welding or grinding. A self-centeringjaw quickly adjusts to clampworkpieces, even accommodatingpieces of different sizes. Made ofcast iron, zinc plated. The spindle iscopper plated to resist weld spatter.

CapacityMiter

JawHeight

JawLgth.

ShippingWgt. (Lbs.)

PriceEachCat. No.

WLT-225 311/32 13/8 41/8 81/2 104.00

Angled Drill Press Vises

JawWidth

Max.Opening

JawDepth

OverallHeight

ShippingWgt. (Lbs.)

PriceEachCat. No.

WLT-250 21/2 21/2 11/2 37/16 12 72.00WLT-255 3 31/8 13/4 41/4 17 96.00

Clamp-On Vise

This portable clamp-on vise allows foruse in many different applications.Features a fully enclosed spindle,double lock downs, grooved replace-able jaws and a swivel base.

Max.Opening

ShippingWeight(Lbs.)

PriceEachCat. No. Jaw Width Jaw Depth

WLT-1130 21/2 2 21/2 13 104.00

Woodworker’s Vise

This light and medium-duty vise features double guide-bars,continuous screw action and solid steel dog.

• Castings - gray iron with orange baked-enamel finish• Jaws - drilled and tapped or countersunk holes for attachment

of wood facings• Dog - solid steel

Cat No. Jaw Width Maximum Opening Price EachAC-27090 7 9 58.68

Mounted on an angle base allowing thevise to be adjusted quickly to any anglefrom 0° to 90° vertical. Precision lockingbolts, linked by side plates of highquality steel, lock the vise securely. It iscalibrated for vertical angle readings.

0174.qxd 2/17/2010 3:23 PM Page 174








http://www.reidsupply.com/Detail.aspx?itm=AC-27090





Clam

ps an

d W

orkh

old

ing

VISESGrip-Master Screwless Vises

The Grip-Master screwless vise offers many advantages.Instantaneous, effortless setting by simply pushing on the knobcontrolling the movable jaw. Guaranteed positive locking by lightpress on locking lever. Built-in, recessed parallels level work. Largeloading and unloading capacity. Hardened and ground bars andlocking mechanism insure long life. Straight through drilling permit-ted by extra-wide clearance in base. Hardened and ground V-blockattachment available for holding round or oval work securely.

V-Block Attachment Holds Round Stock

Vises V-Blocks

Cat. No.Jaw

WidthMax.Open

Jaw Depth

ParallelDepth

PriceEach Cat. No.

Price Each

GM-1 3 3 11/4 5/8 142.78 VB-1 38.72GM-2 4 411/16 11/4 5/8 202.07 VB-2 44.77GM-3 6 65/16 113/16 5/8 264.99 VB-3 58.08GM-4 8 83/8 2 5/8 375.10 VB-4 72.60

Grip-Master Fixture Locks

Adaptable to a wide range of applications and simplifies jig andfixture designing and eliminates special locking details. A simplepush or pull on the bar knob sets the bar instantaneously at anyposition between fully open or fully closed. A light press on thelocking lever gives an extra forceful forward motion to the bar,exerting a holding pressure, adjustable from 400 to 1,100pounds. Actually compensates for variations in size of work. Itslong stroke assures wide work clearance and permits quickremoval of chips and burrs. No screw threads to wear or strip.Hardened and ground bar and locking mechanism. Bar left softfor 1” on work end for easy machining when adapting it to fixture.

Cat. No. A B C D E F G H I JPriceEach

GMF-1 35/16 33/16 27/8 9 .493 21/2 23/16 13/32 11/2 3/4 81.07GMF-1-10 35/16 33/16 27/8 10 .493 21/2 23/16 13/32 11/2 3/4 83.49GMF-1-12 35/16 33/16 27/8 12 .493 21/2 23/16 13/32 11/2 3/4 85.91GMF-1-14 35/16 33/16 27/8 14 .493 21/2 23/16 13/32 11/2 3/4 87.12GMF-1-16 35/16 33/16 27/8 16 .493 21/2 23/16 13/32 11/2 3/4 84.70GMF-1-18 35/16 33/16 27/8 18 .493 21/2 23/16 13/32 11/2 3/4 93.17GMF-1-24 35/16 33/16 27/8 24 .493 21/2 23/16 13/32 11/2 3/4 98.01GMF-2 45/16 311/16 315/16 10 .742 31/2 27/8 17/16 21/8 11/4 96.80GMF-2-12 45/16 311/16 315/16 12 .742 31/2 27/8 17/16 21/8 11/4 104.06GMF-2-14 45/16 311/16 315/16 14 .742 31/2 27/8 17/16 21/8 11/4 106.48GMF-2-16 45/16 311/16 315/16 16 .742 31/2 27/8 17/16 21/8 11/4 110.11GMF-2-20 45/16 311/16 315/16 20 .742 31/2 27/8 17/16 21/8 11/4 116.16GMF-2-24 45/16 311/16 315/16 24 .742 31/2 27/8 17/16 21/8 11/4 118.58

Drill Press Vises

These handy drill press vises can be used from three sides. Workcan be leveled quickly because jaws have built-in parallels. Widelyspaced jaw guide bars, permit drilling clear through work. Jaw sidesare precision ground at right angle to parallels to permit accuratedrilling from the sides without resetting the work. Horizontal V-groove, holds round stock firmly for side and end drilling.

Cat. No.Jaw

WidthJaw

OpeningJaw

DepthWeight

Lbs. Price EachDPV-20 6 10 2 21 217.80DPV-30 8 10 21/2 36 309.76

Speed Type Vises

Designed for speed. Screw and nut hardened for long life. Heavysemi-steel castings, for strength. Heavy steel base plate, for rigid-ity. Standardized holes in jaws, for attaching interchangeable jawplates and fixtures. The screw is held positively in the nut whenthe vise is clamped. It cannot slip; yet it is released instantly witha half-turn. Lift the screw and the jaw is free to slide to its fullopening. Slide the jaw to the closed position, drop the screw intothe nut and lock with a half turn. Combination of jaw plates aregrooved for holding round parts, notched for holding parts abovebase of vise, smooth on back side. They are accuratelymachined, hardened and ground. Socket cap screws supplied forattaching them to vise. Vises are supplied without jaw plates.

Vises Without Jaw Plates Jaw Plates

Cat. No.Jaw

WidthJaw

DepthMax.

OpeningWeight

Lbs. Price Each Cat. No.Price

Per SetCV-4 4 11/2 4 121/2 227.11 JP-4 58.40CV-6 6 2 6 31 295.89 JP-6 86.96CV-7 6 2 8 40 397.11 — —

POW-R-ARM ERGONOMIC WORKPOSITIONERS

These work positioners put the workpiece where you want it and holdit tight for hands free production. Repositions workpieces easily andaccurately, eliminating time consuming clamping and unclamping.

Midget 345

Fast on-off action with horizontalhandle. All parts are steel. For intricatesmall work. 6 lbs. capacity.

BaseDia.

OverallHgt.

MountingStud

PriceEachCat. No.

WLT-300 21/2 41/4 5/16-24 136.00

Veep 344

The horizontal handle is easily accessi-ble. Steel body. 1/2” receptacle with setscrew for vise, printed circuit boardholder or special fixture. 20 lbs. capacity.

Cat. No. Base Dia. Overall Height Price EachWLT-305 33/4 41/4 168.00

Mechanical 301

Extra strong, heavy duty positionerwith exceptionally fast on-off action.Body is machined steel, all steel parts.Mounting holes are 5/16-18 on center.Designed for high production assemblylines. 70 lbs. capacity.

Cat. No. Base Dia. Overall Hgt. Price EachWLT-315 6 8 456.00

Junior 343

Fast on-off action with horizontalmoving lock handles. Body is castaluminum with steel parts. Mountingholes are 1/4-20 on 2-1/4” centers. T-bracket. 30 lbs. capacity.

Cat. No. Base Dia. Overall Hgt. Price EachWLT-310 41/4 51/4 200.00

0175.qxd 2/17/2010 3:24 PM Page 175

http://www.reidsupply.com/Detail.aspx?itm=VB-1




http://www.reidsupply.com/Detail.aspx?itm=GMF-1-10















http://www.reidsupply.com/Detail.aspx?itm=DPV-20

http://www.reidsupply.com/Detail.aspx?itm=DPV-30

http://www.reidsupply.com/Detail.aspx?itm=GMF-1

http://www.reidsupply.com/Detail.aspx?itm=GMF-2

http://www.reidsupply.com/Detail.aspx?itm=GM-1




http://www.reidsupply.com/Detail.aspx?itm=CV-4

http://www.reidsupply.com/Detail.aspx?itm=JP-4


http://www.reidsupply.com/Detail.aspx?itm=JP-6



Cla

mp

s an

d W

ork

ho

ldin

gVISES

Anglock® Vises

1

3 4

2

The Kurt™ Anglock® D-series vises are designed for precision part clamping on basic machine tools such as knee-type mills, grinders,and machining centers. Vises are ideal for extremely high accuracy tool and mold applications and for use in running production partswhere datums, flatness and parallelism is important. Anglock® design assures the movable jaw does not lift. Semi-hard steel screw,80,000 psi ductile iron construction. Both are machined, which allows you to indicate alignment during set up. Swivel base (soldseparately) allows positioning increments of 1°. Other Kurt™ vises are available as a special order. Please call for price and delivery.

Note: KV-D810 shipped via truck.

AFF

H

G (4 Places)

C

Hex

BE

D 2.00Vise Swivel Base

Cat. No.

Jaw OpeningMax

A B C D E F G±.001

HWt.Lbs.

PriceEach

KV-D675 7.50 6 1.735 16.75 8.75 .725 .688 2.875 78 487.80KV-D688 8.80 6 1.735 16.81 8.75 .725 .688 4.61 78 568.90KV-D810 10.00 8 2.200 21.81 11.50 1.075 .813 3.31 158 1526.80KV-D60-4-SA Swivel Base Only for KV-D675 and KV-D688 324.00

Max. CapacitiesModel 1 2 3 4 Hex SizeKV-D675 7.50 10.50 13.12 15.87 .750KV-D688 8.80 11.50 14.32 17.03 .750KV-D810 10.00 13.50 17.25 20.75 .875

Aluminum center hub with all steel handles and knobs. Blackoxide finish.Cat. No. Description Price EachVSH-5 Fits 4” Vise (9/16” Hex) 31.50VSH-15 Fits 6” Vise (3/4” Hex) 31.50VSH-20 Fits 8" Vise (7/8” Hex) 31.50

Vise Work Stops

Cat. No. Fits Vise Model Price EachKV-D30-45 3-4 Inches Wide 110.00KV-360PWS 5-6 Inches Wide 138.00

Parallel Keeper

Cat. No. Max. Opening Capacity Price EachKV-KPS6000 6" 62.00

Vise Keys - Stepped

Vise keys are used to align your vise toyour milling machine table. All keys arehardened. Step keys are used whenkeyway in the vise is different than thatof the machine T-slot. Sold in pairs.

Cat. No. Key Size Vise Size Price Per PairKV-D30-33A 1/2 x 5/8 3" and 4" 34.00KV-D50-33A 11/16 x 5/8 5" and 6" 35.00KV-D50-33B 11/16 x 13/16 5" and 6" 35.00

MACHINIST’S JACK

Use on drill presses, shapers milling machines, planers andelectric appliances or any place leveling is needed. Heavy caststeel base with adjustable screw and tilting swivel head and locknut for permanent positioning. Approximately 1,000 lbs. capacity.3” high, 4” fully extended.Cat. No. Description Price EachGEN-7 Machinist’s Jack 7.36

JACK SCREWS

Handy for leveling work on planer beds, upright drills, machineryset up and general shop use. They are 1-1/4” diameter at baseand have a range from 2-1/4” to 3-3/8” and can raise over 1,000pounds. The set contains the jack, two extension bases (allowsup to 6-3/8” height), auxiliary pointed screw, and two extensionbases for irregular surfaces.Cat. No. Starrett Description Price EachSTR-S190 S190 Complete Set 49.00STR-190A 190A Jack Only 18.00STR-190D 190D Auxiliary Pointed Screw Only 6.20

Vise Speed HandlesFor Kurt Style Milling Machine Vises

0176.qxd 2/17/2010 3:24 PM Page 176

http://www.reidsupply.com/Detail.aspx?itm=STR-S190

http://www.reidsupply.com/Detail.aspx?itm=STR-190A

http://www.reidsupply.com/Detail.aspx?itm=STR-190D

http://www.reidsupply.com/Detail.aspx?itm=VSH-15



http://www.reidsupply.com/Detail.aspx?itm=KV-D60-4-SA

http://www.reidsupply.com/Detail.aspx?itm=KV-KPS6000

http://www.reidsupply.com/Detail.aspx?itm=KV-D30-33A

http://www.reidsupply.com/Detail.aspx?itm=KV-D50-33A

http://www.reidsupply.com/Detail.aspx?itm=KV-D50-33B

http://www.reidsupply.com/Detail.aspx?itm=KV-D30-45

http://www.reidsupply.com/Detail.aspx?itm=KV-360PWS

http://www.reidsupply.com/Detail.aspx?itm=KV-D810









http://www.reidsupply.com/Detail.aspx?itm=GEN-7

http://www.reidsupply.com/Detail.aspx?itm=813


Clam

ps an

d W

orkh

old

ing

WORK STOPS FOR MILLINGFor Quick and Easy Positioning of Workpieces

Bolts on to vise without any modifications. Works on either rightor left side with any jaw height. Quick adjusting, perfect forproduction runs.Cat. No. Description Price EachAWS-10 Fits 5-6” Vise 37.71

PRECISION ADJUSTABLE MILL STOPA Rigid Stop for Milling Set Ups

Designed for use on milling machines, jig borers, and horizontaland vertical milling set ups. Used with angle plates, vises, jigs,etc. to serve as a rigid stop. 1/2” hole for T-slot mounting, 3/8”diameter rod, 2” x 4-1/2” base with 7” overall height. Steel withblack oxide finish.Cat. No. Description Price EachAMS-5 Adjustable Mill Stop 39.25

V-BLOCKS AND CLAMPSHardened and Ground

Can be used on base, on end and on either side because clampis within the outside width of the block. Provided with anadjustable side screw with caps to prevent tilting when drilling,grinding, or milling. It has hole clearance for drilling and removingdowel pins. Features four 3/8-16 tapped holes, two on base andone on each side, so it can be attached to an angle iron. Theblock is 1-7/8” square and the base is 3-1/2”. Capacity is 1-5/16”.Cat. No. Starrett Description Price EachSTR-28010 567 V-Block & Clamp 265.00STR-28015 567B Clamp Only 35.00

ADJUSTABLE WORK STOPEXTENSIONS

Designed to fit Kurt vises. Allows for quick set-ups and solid locat-ing of work pieces longer than 6”. Made from 6105-T, T-Slottedaluminum extrusion. Main rails shown below allow for effectivetravels of 36” and 54”. Easily mounts to vise jaw with two 1/2-13 x1-3/4” socket head cap screws. Mounting hole spacing is 3.875”on center. Mounting hardware included. Additional sizes availableas special order. Please call for price and delivery.Cat. No. Description Price EachTST-2336 36" Travel Adjustable Work Stop Extension 66.77TST-2354 54" Travel Adjustable Work Stop Extension 74.31

VISE WORK STOP

Quick and easy to use. Attaches to any vise jaw (1/2” through 1”wide) with one screw adjustment. Made from hardened steel,black oxide finish. Stop is 1” wide x 1-7/16” long.Cat. No. Description Price EachEVS-5 Easy Vise Work Stop 12.50

SPIDER HANDLES FOR MILLS

Replaces the standard quill feed handle on most millingmachines. Perfect for all drilling operations. Features a 3” diame-ter solid aluminum machined center with a 1” bore. Three heavyduty solid steel spokes extend 6-1/2” from the center. Platedfinish.Cat. No. Description Price EachSHM-5 Spider Handle for Mills 26.86

0177.qxd 2/17/2010 3:24 PM Page 177

http://www.reidsupply.com/Detail.aspx?itm=STR-28010

http://www.reidsupply.com/Detail.aspx?itm=STR-28015

http://www.reidsupply.com/Detail.aspx?itm=TST-2336

http://www.reidsupply.com/Detail.aspx?itm=TST-2354

http://www.reidsupply.com/Detail.aspx?itm=SHM-5

http://www.reidsupply.com/Detail.aspx?itm=AWS-10

http://www.reidsupply.com/Detail.aspx?itm=AMS-5

http://www.reidsupply.com/Detail.aspx?itm=EVS-5


Cla

mp

s an

d W

ork

ho

ldin

gC-CLAMPS

400 Series C-ClampsDrop Forged, Regular Duty, Extra Deep Throat

Cat. No.Opening Capacity

ThroatDepth

SpindleDia.

PriceEach

WLT-402 0 - 21/2 21/4 9/16 14.40WLT-403 0 - 3 21/2 9/16 15.00WLT-404 0 - 4 31/4 3/4 25.60WLT-406 0 - 61/16 41/8 3/4 38.40WLT-408 0 - 81/4 5 3/4 48.00WLT-410 2 - 101/8 6 3/4 70.40WLT-412 2 - 121/4 65/16 7/8 114.40

Regular Duty - High Visibility

• Drop forged steel frame• High visibility yellow — meets OSHA standards• Tough durable finish• V-grooved anvil prevents slippage

ThroatDepth

SpindleDia.

Min ProofTest Lbs.

PriceEachCat. No. Capacity

WLT-655 0-3 21/2 9/16 3,500 17.60WLT-660 0-41/2 31/4 3/4 6,200 25.60WLT-665 0-61/16 41/8 3/4 6,900 38.40WLT-670 0-81/4 5 3/4 6,600 48.00

Heavy Duty

• For heavy industrial applications• Forged from superior quality steel• Spindle turned from single piece of square bar stock• Grey lacquer finish

ThroatDepth

SpindleDia.

Min. ProofTest Lbs.


WLT-710 0-4 23/8 3/4 10,000 88.00

Regular Duty - Slip-Not

• Drop forged steel frame• Grooved anvil— to grip and hold tight• Serrated pad for sure bite and secure clamping• Plated to resist weld spatter

ThroatDepth

SpindleDia.

Min. ProofTest Lbs.

Price EachCat. No. Capacity

WLT-755 0-3 21/2 5/8 3,500 19.20WLT-760 0-41/2 31/4 3/4 6,200 26.40WLT-765 0-61/16 41/8 3/4 6,900 42.40

Instant Action

• Instant action spindle release for quick clamping• Disengage screw with thumb press only • Made from high strength, ductile iron

Throat Depth

SpindleDia.

Min. ProofTest Lbs.


WLT-45458 0-21/2 111/16 1/2 2,040 13.69

C-Clamp Pads

Update your Wilton clamps (and other American manufacturedC-clamps) with these adapter swivels. Includes pad and C-clip.Installs with a screwdriver.

Flat Pad Serrated Pad

ForSpindle

Price Each1-9

For Spindle

Price Each1-9Cat. No. Cat. No.

WLT-1105 9/16 and 5/8 6.40 WLT-1115 9/16 and 5/8 10.57WLT-1110 3/4 and 7/8 8.00

Clamp Grips

Soft, durable handle press fits over T-handle on “C” and “L”clamps. Provides comfortable grip. Press on middle or on the endfor greater torque. High visibility yellow. Fits many competitormodels.

Fits WiltonClamps

HandleLgth.

SpindleDia.

Cross BarDia.

PriceEachCat. No.

WLT-STGA 402, 403 35/8 5/8 5/16 11.73WLT-STGB 404 51/8 9/16 5/16 11.73

0178.qxd 2/17/2010 3:25 PM Page 178





http://www.reidsupply.com/Detail.aspx?itm=WLT-STGA

http://www.reidsupply.com/Detail.aspx?itm=WLT-STGB

















Clam

ps an

d W

orkh

old

ing

CLAMPSC-Clamps

This line of Pony “C” clamps is an imported product manufacturedin Pony’s exclusive factory under strict guidelines that providesquality at an affordable price. Smoothly cut acme threads areprotected with a bright plated finish. Ductile cast iron frames arepowder-coated bright Pony orange for high visibility and lastingprotection.Cat No. Opening Size Throat Depth Price EachAC-2610 0-1 1 1.51AC-2615 0-11/2 11/2 2.35AC-2620 0-2 1 2.15AC-2622 0-21/2 13/8 3.77AC-2630 0-3 2 4.28AC-2640 0-4 3 7.07

C-Clamp

• Heat treated ductile iron frame• Square thread screws• Steel internal tooth washers on swivel for holding

Cat No.Opening

SizeThroatDepth

ScrewDia.

Normal LoadLimit Lbs.

PriceEach

AC-103 0-3 17/8 9/16 1,800 11.99AC-104 0-4 21/8 5/8 2,400 15.06AC-105 0-5 21/2 5/8 2,400 21.71AC-106 0-6 23/4 5/8 2,400 22.53AC-108 0-8 31/4 3/4 2,400 31.98

C-ClampsDeep Throat Pattern

Capacity Throat Depth fromCenter of ScrewCat. No. Max. Min. Price Each

ABT-78-404 4 0 31/4 29.11ABT-78-406 6 0 41/8 40.12ABT-78-408 8 0 5 52.95ABT-78-410 10 3 6 67.18

Welder’s C-Clamp

• Heat treated ductile iron frame, black baked enamel finish• Square thread screws• Steel internal tooth washers on swivel for holding• Copper plated screws, sliding pins and swivels protect against

weld spatter

Cat No.Opening

SizeThroatDepth

ExtremeDepth

ScrewDia.

Normal LoadLimit Lbs.

PriceEach

AC-1123 0-23/4 21/4 23/4 9/16 4,000 21.87AC-1125 0-43/4 3 35/8 5/8 4,000 34.48

Pony C-ClampsMalleable Frames - Rust-Proofed

Knurled Sliding Pin Thumb Screw

OpeningSize

ThroatDepth

ScrewDia.Cat. No. Type of Handle Price Each

PC-1 5/8 7/8 #12 Knurled 3.45PC-2 1 11/8 1/4 Sliding Pin 3.82PC-4 11/4 13/8 5/16 Thumbscrew 5.44PC-5 11/2 11/2 5/16 Sliding Pin 5.66PC-6 11/2 31/2 5/16 Sliding Pin 9.50PC-7 2 1 5/16 Sliding Pin 5.49PC-8 21/2 13/8 3/8 Sliding Pin 8.34PC-9 21/2 21/2 3/8 Sliding Pin 10.36PC-10 21/2 43/4 3/8 Sliding Pin 22.74PC-12 3 13/8 7/16 Sliding Pin 10.36

3-Way Edge Clamp

Three screw design permits right angle screw to be centered, orpositioned above or below center, on varying thicknesses of work.Used for light duty welding, cutting, trimming and gluing. Made ofmalleable iron. Bright plated.

Discount 2 applies.

OpeningCapacity

Depth ofThroat

ScrewDia.

Price Each1-11Cat. No.

TWC-3325 21/2 21/2 3/8 12.78

Bessey® F-Style All Steel Bar Clamps

Easy to use. Slidemoveable arm into positionand tighten screw spindle.Provides instant clampingat any opening. Saves timeover ordinary C-clamps.Deep throat allows forgreater reach.

Discount 44 applies.Jaw

OpeningThroatDepth

SpindleDia.

ClampPressure

Price Each1-9Cat. No.

Regular DutyBLC-15 0-4 43/4 .563 1,330 33.23Heavy DutyBLC-25 0-8 51/2 .775 2,600 60.03BLC-50 0-12 51/2 .775 2,600 83.08BLC-60 0-20 51/2 .775 2,600 103.99Extra Heavy DutyBLC-70 0-12 7 .850 4,880 158.67BLC-80 0-18 7 .850 4,880 182.79BLC-90 0-36 7 .850 4,880 210.13

Pivot Handle L-Clamps

The pivoting plastic handle revolves 90° allowing greater leverageand faster clamping in restricted places.

ThroatDepth

RailSize

SpindleDia.

PriceEachCat. No. Opening

WLT-965 16 43/4 1 x 15/32 3/4 48.33

0179.qxd 2/17/2010 3:25 PM Page 179

http://www.reidsupply.com/Detail.aspx?itm=TWC-3325

http://www.reidsupply.com/Detail.aspx?itm=PC-10










http://www.reidsupply.com/Detail.aspx?itm=ABT-78-404


















http://www.reidsupply.com/Detail.aspx?itm=BLC-15








Cla

mp

s an

d W

ork

ho

ldin

gC-CLAMPS

Kant-Twist® Clamps

The Kant-Twist® multi-purpose clamps combine the best featuresof ordinary C-clamps and parallel clamps. Lightweight, yet 40%stronger than C-clamps. Designed to eliminate distorting or twist-ing action and the floating jaws always stay parallel. Built-inV-blocks for round stock. Copper plated jaws and screws are idealfor welding clamps.

Round Handle - Copper Plated Jaws

DE

A BC

Round Handle -Copper Plated Jaws

Max.A

Max.B

RatedLoadCat. No. C D E Price Each

KT-396 3/4 3/8 13/8 11/2 3/8 200 10.45KT-401-1 11/16 1/2 13/4 21/8 1/2 350 11.69KT-405-1 2 11/8 31/4 31/2 11/4 800 15.10

T-Handle and L-Handle - Copper Plated Jaws

T-Handle and L-Handle -Copper Plated Jaws

T-HandleCat. No.

L-HandleCat. No.

Max.A

Max.B

RatedLoadC D E Price Each

KT-401 — 11/16 1/2 13/4 21/8 1/2 350 10.80KT-405 KT-405-L 2 11/8 31/4 31/2 11/4 800 13.07KT-407 KT-407-L 27/16 2 41/16 41/8 113/16 700 14.38KT-410 KT-410-L 3 11/4 5 51/4 13/4 1,500 18.67KT-415 KT-415-L 41/2 21/4 63/4 7 21/2 1,700 19.95KT-420 — 6 21/8 81/4 81/4 33/8 2,000 30.43KT-421 — 6 41/2 10 11 51/2 2,000 33.20— KT-430 9 33/8 13 12 51/4 2,500 88.14— KT-435 10 6 15 16 7 3,500 124.17

T-Handle - Polyurethane Jaws

T-Handle -Polyurethane Jaws

Max.A

Max.B


KT-410-8 3 11/4 5 51/4 13/4 1,500 23.34KT-415-8 41/2 21/4 63/4 7 21/2 1,700 24.61

T-Handle - 303 Stainless Steel

T-Handle - 303Stainless Steel

Max.A

Max.B


KT-510 3 11/4 5 51/4 13/4 1,200 43.87KT-515 41/2 21/2 63/4 7 21/2 1,500 50.78

Handle Grips

For use with T-handle clamps. Made of high quality ABS plastic.Taps easily on and off.

A

B

Cat. No. A B For Use With Models Price EachKT-1 1/2 11/2 401 1.37KT-2 11/16 21/2 405, 407 2.75KT-3 7/8 4 410, 415, 510, 515 3.90KT-6 11/8 5 420, 421 4.40

CLAMPS

Clippix Plastic Spring Clamps

• Made from durable, lightweight polyamide• Ergonomic 2-component handle designed

for comfort and a firm grip

Cat No. Throat Depth Clamping Capacity Price EachBLC-300 3/4 3/4 1.06BLC-301 11/8 1 2.15BLC-302 11/2 13/4 2.42BLC-303 115/16 2 2.64BLC-304 11/2 2 2.30BLC-305 23/4 3 5.99

Allows pressure adjustment from 1 to 50 pounds of clampingforce. The jaws and handles are made of glass filled nylon.Springs are heavy duty tempered steel. Soft, pivoting, plastic jawpads to hold irregular shaped objects.

JawOpening

JawLength

JawReach

PriceEachCat. No.

AC-3251 1 41/2 11/4 4.37AC-3252 2 61/2 21/8 6.39

Spring Clamp

Spring clamps are extra hands. Use on wood, metal, fabrics,plastic or anywhere spring pressure is adequate and fast applica-tion/removal is important. Jaws on the 2” and larger jaw openingsizes are shaped for holding round stock. Poly-vinyl coated tipsprevent marring and coated handles provide cushioned grip.Made of cold-finished steel, plated.

Discount 2 applies.

No CoatingCoated Tipsand Handles

Coated Handles

JawOpening

JawLgth.

JawReach

Price Each1-11Cat. No. Description

PSC-5 No Coating 1 4 11/4 1.56PSC-10 Coated Handles 1 4 11/4 2.22PSC-20 Coated Tips and Handles 1 4 11/4 2.47PSC-25 No Coating 2 6 2 3.05PSC-30 Coated Handles 2 6 2 3.51PSC-40 Coated Tips and Handles 2 6 2 3.82PSC-45 No Coating 3 9 3 7.75

SuperGrips™ Clamp

Great for use in welding, drilling, assembly, maintenance and forgeneral clamping. Instant locking clamps are fast and strong.Hardened steel rails, heat treated chrome vanadium forged steeljaws.Discount 44 applies.

ThroatDepth

ClampPressure

Price EachCat. No. Opening 1-9SGC-15 4 21/2 440 75.04SGC-20 8 21/2 440 85.76

Pressure Adjusting Spring Clamps

0180.qxd 2/17/2010 3:25 PM Page 180

http://www.reidsupply.com/Detail.aspx?itm=PSC-10






http://www.reidsupply.com/Detail.aspx?itm=SGC-15

http://www.reidsupply.com/Detail.aspx?itm=SGC-20




http://www.reidsupply.com/Detail.aspx?itm=KT-405-L































Clam

ps an

d W

orkh

old

ing

• Change from clamping to spreading by simply twisting the dial– no disassembly

• Handle with pump lever parallel to the rail• Convenient one-handed operation• All around clamping – in front of, behind and at the side of the

rail

BAR CLAMPSHeavy-Duty Steel Bar Clamps

Made for all types of heavy-duty clamping. Used by cabinet-makers, woodworkers, metalworkers or for home shop anddo-it-yourself projects. Protective pads made of thick, durableplastic. Clamps rest parallel on work surface for ease of workplacement and adjustment.

• Reach - 3” from edge of the bar to center-line of screw• Bar - 1” x 5/16” plated, round edge, high carbon steel• Castings - malleable and/or ductile iron; powder coated orange

finish• Screw - 1/2” diameter cold-drawn steel with special, smoothly

cut ACME threads• Handle - varnished hardwood with plated steel ferrule• Clutch discs - hardened, plated steel; three clutch discs and one

clutch spring constitute the multiple-disc-clutch• Swivel - 1-13/16” diameter; exclusive Jorgensen design with

steel internal tooth washer for positive “stay on” power

Steel Bar Clamps

Used by homecrafters, cabinet-makers, woodworkers and metal-workers. The sliding head is threaded to accommodate the screw.All adjustments are made in the moveable sliding head, makingthis style fast-acting, easy to open and close and suitable for“close quarters” clamping. Strong, lightweight steel bars are rust-resistant. Multiple-disc-clutch holds securely at any point alongthe bar.• Reach - 2-1/2” from edge of bar to center-line of screw• Bar - 1/4” x 3/4” plated, round-edge, high carbon steel• Castings - malleable and/or ductile iron; powder coated orange

finish• Screw - 3/8” diameter cold-drawn steel with special, smoothly

cut U.S.S. threads• Handle - varnished hardwood with plated steel ferrule• Clutch discs - hardened, plated steel; two clutch discs and one

clutch spring constitute the multiple-disc-clutch

Clutch Style Bar Clamps

• Powder coated, ductile cast iron jaws• Two piece slip clutch plates• Nickel plated, drawn serrated rail• Non-marring pads on the top and bottom jaws• Ergonomically shaped wood handle

Cat No. Throat Depth Clamping Capacity Load Limit Lbs. Price EachBLC-200 21/2 6 600 12.75BLC-201 21/2 12 600 14.46BLC-202 21/2 18 600 17.04BLC-203 21/2 24 600 18.75BLC-204 21/2 30 600 20.68BLC-205 21/2 36 600 21.75BLC-206 31/2 12 1000 25.29BLC-207 31/2 18 1000 29.69BLC-208 31/2 24 1000 33.76BLC-209 5 12 1200 42.88BLC-210 5 18 1200 52.31BLC-211 5 24 1200 59.49

Steel Bar Clamps

Used for commercial metalworking, heavy fabricating and indus-trial welding applications. Crank handle, notched steel bar clampsare simple to operate. High carbon steel bars are notched at oneinch increments for easy positioning of the tail stops. Fixed headis threaded to accommodate the screw. Screws and handles usedfor final clamping adjustment only.

Cat. No.Max. Opening

CapacityNormal

Load Limit Lbs.Clamping

Faces Bar TypePriceEach

AC-6024 24 4,000 13/4 x 11/2 13/8 x 5/16 46.03AC-6030 30 4,000 13/4 x 11/2 13/8 x 5/16 48.81AC-6036 36 4,000 13/4 x 11/2 13/8 x 5/16 51.39AC-6048 48 4,000 13/4 x 11/2 13/8 x 5/16 57.30AC-6060 60 4,000 13/4 x 11/2 13/8 x 5/16 75.03AC-6072 72 4,000 13/4 x 11/2 13/8 x 5/16 66.80

Bar and Spreader Clamps

Converts easily from bar to spreader clamp. Spring loaded headmaintains greater applied force than other one handed clamps.Thumb release clutch disc for one - handed opening and closing.Full size soft plastic pads for maximum work protection.

Discount 2 applies.

Bar Clamp Position

Spreader Position

Cat. No. Max. Opening CapacityPrice Each

1-11ACC-3410 10 19.95ACC-3416 16 21.53ACC-3428 28 25.07

DuKlampsOne-Handed Clamping and Spreading

Cat No. Throat Depth Clamping Capacity Clamping Force Price EachBLC-100 21/2 6 180 24.65BLC-101 21/2 12 180 25.72BLC-102 31/4 6 260 27.33BLC-103 31/4 12 260 28.51BLC-104 31/4 18 260 32.15BLC-105 31/4 24 260 34.30

Cat No. Max. Opening Capacity Load Limit Lbs. Price EachAC-3712-HD 12 1000 16.34AC-3724-HD 24 1000 19.79AC-3736-HD 36 1000 23.84

Cat No. Max. Opening Capacity Load Limit Lbs. Price EachAC-3706 6 600 12.49AC-3712 12 600 13.84AC-3718 18 600 15.28AC-3724 24 600 16.68AC-3736 36 600 20.33

0181.qxd 2/17/2010 3:26 PM Page 181

http://www.reidsupply.com/Detail.aspx?itm=AC-3712-HD



http://www.reidsupply.com/Detail.aspx?itm=ACC-3410

































Cla

mp

s an

d W

ork

ho

ldin

gCLAMPS

Quick-Action BandClamps™

Ideal for temporary hose and tube connections, maintenance andrepeated use such as testing, filter bags, dust gaiters, molds, etc.Made from 304 stainless steel. Slotted screw adjustment anddraw latch for quick clamping. Band is .63” wide.


Dia.Range

UltimateStrength Lbs.

Price EachCat. No. 1-9PX-115 2.76-4.53 300 37.80PX-135 3.54-5.31 300 35.60PX-175 5.12-6.89 300 37.64PX-215 6.69-8.46 300 39.56PX-255 8.27-10.04 300 41.55PX-295 9.84-11.61 300 43.52PX-335 11.42-13.19 300 45.44PX-375 12.99-14.76 300 47.43PX-415 14.57-16.34 990 66.31PX-615 22.44-24.21 990 91.11

Pipe Clamp Fixture

One set of fixtures may be used to make any number of barclamps simply by mounting on different lengths of 3/4" black pipe.Made of malleable iron with baked enamel finish. Pipe is notincluded.


Price Each1-9Cat. No. Description

PCF-50 3/4” Pipe Clamp Fixture 18.83

Band Clamp

Used for clamping large round, rectangular and irregular shapes.2” wide canvas band. Positive hold is afforded by the dual self-locking cast iron cams which allow the band to be pulled tightfrom either or both sides. Malleable iron coating with orange-baked enamel finish. Crank handle.

Cat. No.Length OfBand (Ft.)

PriceEach

AC-6210 10 100.87AC-6215 15 112.62

0182.qxd 2/22/2010 10:48 AM Page 182

http://www.reidsupply.com/Detail.aspx?itm=PX-115










http://www.reidsupply.com/Detail.aspx?itm=PCF-50



clamps workholding

Documents

reid supply

black oxide

chuck jaw

short run

line action

line action

loc xpansion

red vinyl