scuba gaskets catalogue · 2019. 5. 31. · 39 x 1.50 39.00 1.50 42.00 for suunto c8 d4 39.1x 1.3...
TRANSCRIPT
-
Scuba Gaskets Catalogue
Scuba O-Rings is our job! www.scubagaskets.com
email: [email protected]
tel 00357-99653130
Nicosia Cyprus
http://www.scubagaskets.com/mailto:[email protected]
-
O-Ring
Code
I.D.
mm
C/S
mm
O.D
mm
Application Guide
001 0.74 1.02 2.78
002 1.07 1.27 3.61
003 1.42 1.52 4.46 Submersible pressure gauge/consoles: internal swivel seal
1.7 x 1.00 1.70 1.00 3.70 Same dimensions as APEKS part no : AP2041
004 1.78 1.78 5.34 Older internal swivel seal models; AT-PAC BC's Power inflator control Same dimensions as Sherwood part no 6121-
122, APEKS AP6403
1.95 x 1.00 1.95 1.00 3.95 Same dimensions as Sherwood part no 6500-112
2.2 x 1.00 2.20 1.00 4.20 Same dimensions as Scubapro part no 1.050.363
2.4 x 1.90
RO
2.40 1.90 6.20 Same dimensions as Scubapro part no 1.050.317
2.5 x 1.00 2.50 1.00 4.50 Same dimensions as APEKS part noAP5711
005 2.57 1.78 6.13 Seal used in older depth and tank "stem" gauges
2.75x 1.6 2.75 1.60 5.95
006 2.90 1.78 6.46 Common seal in regulator balance chambers; Power inflator stems; CO2 detonators;SAS gland seal. Same
dimensions as Sherwood part no 5121-101 & 6500-118 Scubapro part no 1.050.117. Mares 46110101,APEKS
AP1299
007 3.68 1.78 7.24 Regulator piston ring; small HP seal. Same dimensions as Sherwood part no G007A ,APEKS AP1282
106 4.42 2.62 9.66 Same dimensions as Sherwood part no 5121-102
008 4.47 1.78 8.03 Sonic regulators; Regulator piston ring; small HP seal. Same dimensions as Sherwood part no 6110-129.
Scubapro part no 1.050.126
107 5.23 2.62 10.47 Same dimensions as Sherwood part no 6121-129
009 5.28 1.78 8.84 Seal in open-tube depth gauges, Regulator hose: swivel end; Piston barrel HP seal;. Same dimensions as
Sherwood part no 6121-135 & 6400-113
902 6.02 1.63 9.28 Same dimensions as Scubapro part no 1.050.293
010 6.07 1.78 9.63 Regulator hose: swivel end; Piston barrel HP seal;2nd stage orifIce seal; Valve stem seals; Early calypso regulators;
Power inflator stems. Same dimensions as Sherwood part no 5121-104 & 6110-119 &6161-101 &6121-
137.Scubapro 1.050.132 1.050.136.Mares 46110205,APEKS AP1154
-
6.35x1.78 6.35 1.78 9.91 Special Size in between 010 and 011
6.5x1.3 6.50 1.30 9.10 Inner O-ring hose
610 6.75 1.78 10.31 Mares part no 46110106
7.5 x1.5 7.50 1.50 10.50 Inner O-ring hose
109 7.60 2.62 12.84 Same dimensions as Scubapro part no 1.050.385
903 7.65 1.63 10.91 Same dimensions as Sherwood part no 6121-141, 6110-123
011 7.65 1.78 11.21 Regulator hose: male end; Regulator port plugs LP; Hose adapters; J-regulators;Early replacement HP seats;
Captured HP outlets; Piston HP barrel BC hose coupler. Same dimensions as Sherwood part no 5121-104.
Scubapro part no 1.050.351 & 1,050,136. Mares part no 46110107, APKES AP1409
611 8.74 1.78 12.29 Special Size in between 011 and 012
110 9.19 2.62 14.43 Old double manifolds; Spearguns
012 9.25 1.78 12.81 Console/gauge hoses: male end; Underneath filter; Hose adapters; HP seat seal; LP swivel cap; HP port plugs.
Same dimensions as Scubapro part no 1.050.145. Mares part no 46110108 & 46110110, APEKS AP1445
9.75 x 1.78 9.75 1.78 13.31 Special Size in between 012 and 013
905 10.72 1.83 14.38 Same dimensions as Sherwood part no 6400-135
111 10.77 2.62 16.01 Australian/ Nemrod valves; BC inflators; DIN regulator seals. Same dimensions as Sherwood part no 6400-138
MARES 46110247,Scubapro 1,050,193 &1,050,428 APEKS AP 1166
013 10.82 1.78 14.38 Same dimensions as Scubapro part no 1.050.147 Mares part no 46110215, Sherwood part no 6400-115
906 11.90 1.98 15.86 Same dimensions as Sherwood part no 6110-115 & 6121-104
614 11.91 2.62 17.15 Special Size in between 111 and 112
112 12.37 2.62 17.61 Steel tank valve; Basal DIN seal. Same dimensions as Scubapro part no 11.361.115
014 12.42 1.78 15.98 2nd stage inlet fittings; J-regulators; Common in aluminium cylinder valve to yoke Regulator. Same dimensions as
Sherwood part no 5121-105. Scubapro part no 1.050.347. Mares part no 46110211,APEKS AP1159
113 13.94 2.62 19.18 Aquarius piston ring / cap seal; Healthway regulators . Same dimensions as APEKS AP1405
015 14.00 1.78 17.56 1st stage inlet fittings; HP seal retainer seal; J valve module; Valve HP stage; plugs; 2nd barrel and housing plug
seals. Same dimensions as Sherwood part no 5121-106. Scubapro part no 1.050.158 ,APEKS AP1267
15 x 1.5 15.00 1.50 18.00
15 X 4.00 15.00 4.00 23.00 Same dimensions as Mares part no 46200559
114 15.54 2.62 20.78 Early piston models; Paintball Guns; re breathers Same dimensions as APEKS AP1505
-
016 15.60 1.78 19.16 Old 1/2" NPS valves; 2nd stage inlet fittings; SAS LP seats; J-regulators; HP module seal; Valve HP plugs; 2nd stage
barrel and housing plug seals; Paintball Guns;M18X1.5 Valves. Same dimensions as Sherwood part no 6400-125.
6500-129. Scubapro part no 1.050.160
115 17.12 2.62 22.36 AMF HP module; BC fittings
017 17.17 1.78 20.73 Regulator piston ring and cap; Dacor HP module. Same dimensions as Scubapro part no 1.050.161 & 1.050.162.
Mares part no 46110225,APEKS AP1298
18 X 3.00 18.00 3.00 24.00 Used for Puracon air monitoring unit of L&W compressors
116 18.72 2.62 23.96 Genesis tank valve; BCD Inflator Mechanisms; Paintball Guns
018 18.77 1.78 22.33 Regulator piston ring (1970's); 2nd stage inlet seal; Body plug seal , Same dimensions as APEKS AP4089
211 20.22 3.53 27.28 Early BC fittings
019 20.35 1.78 23.91 Healthway / USD / Same dimensions as Sherwood industrial piston regulator Same dimensions as APEKS AP1438
212 21.82 3.53 28.88 Early BC fittings Old MDL Tank valve
020 21.95 1.78 25.51 Regulator piston ring (USD & SAS). Same dimensions as Sherwood part no 6400-102
213 23.39 3.53 30.45 Early BC fittings Same dimensions as APEKS AP1278
119 23.47 2.62 28.71 For Mares spear guns , Same dimensions as APEKS AP1277
021 23.52 1.78 27.08 Regulator piston ring
24 x 2.00 24.00 2.00 28.00 For Suunto C6 Zender
214 24.99 3.53 32.05 M25X2 valve Seals. Same dimensions as Scubapro part no 1.050.259
120 25.07 2.62 30.31 For re breathers
022 25.12 1.78 28.68 Common regulator piston ring; Body plug seals; Paintball guns. Same dimensions as Sherwood part no 5110-107.
Scubapro part no 1.050.177
215 26.58 3.53 33 3/4 valve seal Aluminium Cylinder valve seals
023 26.70 1.78 30.26 Regulator LP swivel seal; Body plug seals. Same dimensions as Sherwood part no 6110-131 & 6400-107
27 x 1.3 27.00 1.30 29.60 O-ring of Oceanic diving watch F10,Atom ,Geo,Bud, Aeris Manta, and Epic
024 28.30 1.78 31.86 Piston cap seals (USD); SAS 1st stage. Same dimensions as Sherwood part no 6110-125 APEKS AP1420
123 29.76 2.62 35.00
025 29.87 1.78 33.43 Gauge lenses. Same dimensions as Sherwood part no 5110-109, Suunto Zoop old model
026 31.47 1.78 35.03 For Suunto C3, Cobra, EON,VIPER,FAVOUR,AIR LUX , Zoop Novo
027 33.05 1.78 36.61 Same dimensions as Scubapro part no 1.050.164
36 x 1.50 36.00 1.50 39.00
-
Suunto D9 36.80 1.20 39.20 For Suunto D9
39 x 1.0 39.00 1.00 41.00 For Suunto Stinger ,C1 ,Spider
39 x 1.50 39.00 1.50 42.00 For Suunto C8 D4
39.1X 1.3 39,10 1,30 41.70 For Suunto D6, D6i
-
O-ring part numbers per brand associated with Scubagaskets codes (Mares. Scubapro. Suunto.Oceanic.Sherwood.) APEKS Sherwood Mares Suunto & Scubapro S.Gasket Part number Part number Part number Oceanic Part number
Product Part number number
003 004 AP6403 005 006 AP1299 5121-101 46110101(Sh70) 1,050,117 (Sh70)
6500-118 007 AP1282 G007A
008 6110-129 1,050,126(Sh70) 009 6400-113
(Poly Sh90) AP1154 6161-101 46110205(Sh70) 1,050,132(Sh70)
010 6110-119 1,050,136 (Sh90) 5121-103
011 AP1409 5121-104 46110107(Sh70) 1,050,138(Sh90) 1,050,351(Sh70)
012 AP1445 46110108 1,050,145 (Sh70) 46110110(Sh70)
013 6400-115 46110215(Sh70) 1,050,147(Sh90)
014 AP1159 5121-105 46110211(Sh90) 1,050,347(Sh70)
015 AP1267 5121-106 1,050,158 (Sh90) 016 6500-129 1,050,160(Sh70)
6400-125 017 AP1298 46110225(Sh70) 1,050,161(Sh70)
1,050,162(Sh90) 018 AP4089 019 AP1438 020 6400-102 021 022 5110-107 1,050,177(Sh70) 023 6400-107
6110-131 024 AP1420 6110-125 025 5110-109 Zoop
Novo C3,Cobra
026 Eon, Viper, Favour, Air Lux, Zoop old model
027 1,050,164(Sh70)
902 1,050,293(Sh70)
610 46110106 (Sh70) 903 6121-141
6110-123 905 6400-135 906 6110-115 106 5121-102 107 109 1,050,385(Sh70)
110
-
S.Gasket APEKS Sherwood Mares Suunto & Scubapro Product Part number Part number Part number Oceanic Part number
number
Part number
AP1166 6400-138 46110247(Sh90) 1,050,193(Sh90)
111 1,050,428 (Poly-Sh90)
112 11,361,115
113 AP1405 114 AP1505 116 119 AP1277 Spear guns 123 Spear guns
211 212 213 AP1278 214 1,050,259(Sh90)
215 2.75 x 1.60 15 x 1.5 9.75 x 1.78 6.36 x 1.78
Oceanic F10,Atom Geo,Bud, 27x 1.3 Aeris Manta, and Epic 1.70 x 1.00 AP2041 15.6x 2.26 8.73 x1.78 11.91x2.62 1.95X 1.00 6500-122 2.20X 1.00 1,050,363(Sh70)
2.5 x 1 .00 AP5711 2,4 x 1,90 1,050,317
15x 4.00 46200559(Sh70) 24X 2.00 C6,
ZENDER 36 X 1,50 36.8 x 1.2 D9 39 x 1,00 Suunto
Stinger,C1, Spider
39 X 1,50 C8, D4, D4i, Oceanic OCS &OCI
39.1 x 1.3 D6,D6i
-
O-Ring Special tools
Specialized O-ring tools to assist the insertion of the new O-rings to difficult places with minimum effort.
Scuba Lubricants from Aerospace Lubricants Inc. ScubaGaskets proudly announce the representation of the Oxygen Safe Lubricants of Aerospace Lubricants Inc. Aerospace lubricants is one of the leading companies in the area of scuba lubricants. With over 35 years of cutting-edge science, Aerospace Lubricants offer their latest Tribolube® line of products that is furthering the sport of scuba diving. Unlike competitive products, the Tribolube® line of products offer superior extreme pressure and anti-wear properties extending equipment life by dramatically reducing corrosion and sticky, residue buildup. With breakthrough science and technology, Tribolube’s® revolutionary formulas make underwater breathing easy, no matter what the climate. Innovative packaging allows for a more accurate application, making Tribolube products easier to use than the competitive brands.
The Tribolube® line of O2 safe lubricants are compatible with all o-rings and materials used in the scuba industry – leading the way to safer, easier and more enjoyable scuba diving experiences.
-
Service Kits
1. EPDM Sh70 Service kit 100 O-Rings
10 each of each size 008.010.011.012.013.014.017.022.109.111 O-ring pick tool included
2. VITON FKM Sh 75 & 90 Service kit 120 O-Rings
10 each of each size 003.007.009.010.011.012.013.014.015.111.112.214. O-ring pick tool included
3. NBR Sh 90 Service kit 100 O-Rings
10 each of each size 003.009.010.011.012.014.110.111.112.21 O-ring pick tool included
4. NBR Sh 70 Service kit No.1 100 O-Rings
10 each of each size 003.004.005.006.007.008.009.010.011.012 O-ring pick tool included
5. NBR Sh 70 Service kit No.2 100 O-Rings
10 each of each size 013.014.015.016.017.018.019.020.021.022 O-ring pick tool included
6. NBR Sh 70 Service kit No.3 100 O-Rings
10 each of each size 2.20 x 1.00.RO.902.903.905.906.106.107.610.1.95 x 1.00
O-ring pick tool included
7. NBR Sh 70 Service kit No.4 100 O-Rings
10 each of each size 023.024.025.110.111.113.116.212.214.215. O-ring pick tool included
-
Miflex Xtreme Diving Hoses
• H.P Carbon Miflex hose 0.6m
• Miflex BCD Hose 0.65m
• Miflex Octopus Regulator Hose 1 m
• Miflex BCD Hose 0.65m
• Miflex Regulator Hose 0.75m
• Miflex Technical Hose 2 m
Save a dive Key-rings
• Mini Tank with 12 O-rings for Air (112 & 014)
• Mini Tank with 10 Viton O-rings for Nitrox Dive
• Mini Tank with 10 Green Viton O-rings for pure oxygen
Spare Parts for Valves
• Pipes for Polaris Valves M 25 x 2
• Seats for Polaris Valves M 25 x 2
• Stems for Polaris Valves M 25 x 2
• Teflon washers for M 25 x 2
-
O-Rings for High Pressure Breathing Appliances.
Frequently Asked Questions.
Why should we prefer your O-rings?
SCUBAGASKETS O-Rings have been selected by the manufacturer so that they are the correct type for the specific application which is use in SCUBA equipment.
The average diver might be aware of two main categories of O-rings commonly used in SCUBA equipment. that come in different hardness (Shore A). ranging from 70 to 90. These are Nitrile O-rings,EPDM, Polyurethane and Viton® O-rings. The latest are being used with oxygen enriched mixtures. However there is a great variety of materials in the industry and each material has its recommended field of use. Even within the same category. and the same hardness. there are many subtypes; with each having its own applications. By selecting SCUBAGASKETS you eliminate luck and you ensure the use of correct seals.
Your O-rings cost more than other brands’ do.
Two issues to consider when you are buying O-rings:
There are no hidden costs with SCUBAGASKETS. We simply let you know the price to your door, not the one that the product leaves our warehouse with. Everyone can understand how the initial (ex-works) price increases until the product reaches its final destination; your address! Calculate above all shipping fees In addition to that calculate handling or what ever costs the supplier will have to charge on top of the advertised price. and if the product is eligible to taxes. calculate the import tax. customs clearance fees. VAT and so on. You will probably end up with a figure that is not even close to the advertised price.
Even after the calculations there might be cheaper solutions! Fair enough! Yes. we don’t claim being the lower cost supplier. Instead our focus is on high-tech OEM applications. and we are striving to offer our customers the best possible quality for their application and the best value for money. Our O-rings are not general purpose O-rings. They are carefully and specifically selected by the manufacturer for SCUBA applications.
What is FKM?
A. FKM is the ASTM designation for the fluoroelastomer category. It is not a mark of quality. Not all FKMs are equivalent. and some may fall short on desired performance.
What is Viton?
Viton is a trademark of DuPont Performance Elastomers. Viton® was introduced in 1958
and scientists and engineers have relied on DuPont and now DuPont Performance Elastomers Viton® for its superior performance and unique properties ever since. However. DuPont Performance Elastomers is not the only company that manufactures
FKM products. Many people in the industry incorrectly refer to any and all FKM elastomers as Viton®. Bear in mind that not all FKMs are equivalent. As a result. you could end up
with sealing products that are not the type of Viton® you need. let alone made of 100% virgin DuPont Performance Elastomers Viton®. Products not made from DuPont
Performance Elastomers Viton® may fall short of the expected performance levels afforded by the stringent quality standards DuPont Performance Elastomers has set for Viton®. which is manufactured at ISO 9002 registered facilities worldwide.
-
Are all fluoroelastomers "Viton®" fluoroelastomers?
In a word. no! Only DuPont Performance Elastomers manufactures Viton® fluoroelastomer. Because Viton® is an established industry standard. many people incorrectly refer to any and all fluoroelastomers as Viton®. To ensure you're getting the highest quality
fluoroelastomer available. insist on products made only with DuPont
Performance Elastomers virgin Viton®.
How do I know I am getting O-rings made with Genuine Viton® fluoroelastomer?
Look and Ask! Be sure to make Viton® an element of your part specification. When parts are shipped. look for the Genuine Viton® trademark. Not every supplier has a right to
use the word Viton® in its products!
Why does VITON®
matter?
It is your guarantee of product integrity. When you use products that carry this trademark. compliance to OSHA Mechanical Integrity Section 1910.119 is assured. It means that the parts offer the superior performance that only DuPont Performance Elastomers
Viton®
fluoroelastomer provides. Other fluoroelastomer parts may include blends and other rubbers that deliver inferior heat and fluid resistance performance.
Who can use the word "VITON ®?"
Only manufacturers who have signed a formal agreement with DuPont Performance Elastomers can use this trademark on their products. The manufacturers are selected carefully for their knowledge. their quality standards and for their ability to help you select the correct type of Viton® for your application. A well-written specification will communicate your needs to your supplier. who has up-to-date information about the variety of Viton® performance types and who can suggest the most cost-effective recommendation.
-
Why your Nitrox O-rings come in black colour?
This was a tough decision we had to make. We chose black because of its superior properties over brown or green material. The tests showed that Black Viton compared to Green or Brown Viton. with all parameters constant except for the colour. is favourable. It has higher strength. better stability and better elastic properties originally (brand new). and also after exposure to extreme situations that cause material fatigue. It also possesses higher resistance to surface damage.
The production of any colour material is feasible but requires the addition of pigments and other chemicals which by definition change the elastomer’s physical characteristics. As divers we are all highly sensitive to quality issues. We would be very reluctant to compromise any amount of quality for the sake of being able to identify Viton by colour. Furthermore we should be aware that nitrile-type and other materials may indeed be produced in green or brown or any other colour we can imagine. If we judge only by colour then there is a great risk of falling into errors. We have chosen to sacrifice the easy identification by colour for getting the benefit of the best possible quality. The graphs below compare the characteristics within a range of DuPont’s Viton Elastomers (reference below). You will identify the superiority of black elastomer with regards to Tensile strength. elongation characteristics and stabili ty over heat exposure:
ORIGINAL PROPERTIES 300
250
200
150
100
50
0
HARDNESS CHANGE (pts Shore A) Tesnile Strength (X 10psi) Elongation %
Properties after ageing (Standard Heat Exposure test at 250 oC for 70 Hours)
250 200
150
100
50
0
HARDNESS CHANGE (pts Shore A) Tesnile Strength (X 10psi) Elongation %
-
What else do we mean by quality?
35 Years of O-ring Technical Expertise in the industry: (including general industry. heavy chemical industry (offshore) Automotive. Water and Heating and others. Also we are very much involved in the Aerospace industry. working closely with all leading European companies . This assures you that you have the best selection for SCUBA gear with regards to technical characteristics.
The O-rings are packed in shocked-proved containers. protected from damage by mechanical pressure that may cause material deterioration and hence alteration of the O-ring sealing characteristics.
The O-rings are packed in opaque containers. protected
from UV-light that may cause material deterioration and hence alteration of the O-ring sealing characteristics.
The O-rings are packed in straight-sided jars. which have been specifically designed so you can place them on top of each other and save storage space.
The containers are closed with safety seal. which allows you to ensure quality before you buy by checking that the seal is in place.
The jars have wide mouth either 5cm or 7.5cm which makes them ideal to work from in the
work bench. You don’t need to find a bulky O-ring kit box to store all different types of O-rings that you are using. Just use the O-rings containers. No more mixing up. and no more mess
inside the big boxes. Have you ever drop an open big box with 30 different O-ring sizes