scepter corporation - corpassets.com · pedersen usl tool & cutter grinder tool holders &...
TRANSCRIPT
®
Tuesday, March 9, 2010 10:30 A.M. 504A Valleybrook Dr.Don Mills (Toronto), ON M3B 2S9
KITAMURA MYCENTER 4X CNC VMC TOSHIBA VMC 85-E CNC VMC
4.3” SPINDLE
91” x 48” x 32” TANK
94” x 54” TABLE1999
SODICK A10C CNC sinker type EDMTOSHIBA BTD-11 CNC table type HBM
Surplus to the Ongoing Needs of
SCEPTER CORPORATION
EST TICINO (1984) 520 gap bed engine lathe with 42”/57” swing, 85” between centers, 6.25” spindle bore, NEWALL 2 axis DRO, speeds to 600 RPM, inch/metric threading, chucks & steadies s/n01061
TOS (1993) SN 50 gap bed engine lathe with 20/28” swing, 84” between centers, 2.25” spindle bore, speeds to 2000 RPM, inch/metric threading, taper turning s/n 050200781
COMAIRCO CE 15H 120 15HP tank mounted piston type air compressor s/n 11160
HYDROVANE 15 HP air compressor
ULTRA AIR UA100 AC air dryer s/n U00496
SODICK A10C CNC sinker type EDM with SODICK V-80 CNC control 74” x 31.5” table, travels; X- 39.7”, Y-31.4”, Z-19.68”, C- 360º, work tank dimensions 91” x 48” x 32 s/n n/a
(2) FREJOTH VFTM vertical turret mill with 9” x 42” table, speeds to 4200 RPM, ACURITE 2 axis DRO, power table feed s/n 5117, 4756
BRIDGEPORT SERIES I vertical turret mill with 9” x 42” table, speeds to 4200 RPM, ACURITE 2 axis DRO, power table feed s/n 422921086W
BRIDGEPORT SERIES I vertical turret mill with 9” x 42” table, speeds to 4200 RPM, ACURITE 2 axis DRO s/n 425600187W
EXCELLO 602 vertical turret mill with 9” x 42” table, speeds to 4000 RPM , QUALITY 2 axis DRO, s/n1845
EXCELLO 602 vertical turret mill with 9” x 42” table, speeds to 4000 RPM , MITUTOYO 2 axis DRO, 5.5” riser s/n 11788
2
SODICK A10C CNC sinker type EDM
STANKO 79” X 24.5” hydraulic surface grinder
EST TICINO 520 gap bed engine lathe
6.25” BORE
TOSHIBA (1983) BTD-11 CNC table type HBM with FANUC OM CNC control, 4.3” spindle, 63” x 55” T-slot rotary table, travels: X –70.9”, Y – 59.05”, Z – 57.08”, W – 19.5”, ASA 50 spindle taper, speeds to 1000 RPM, 20 HP spindle motor, table capacity, coolant s/n 14028
MONTI MCS 85 CNC table type HBM with FANUC 16M CNC control, 3.35” spindle, 47.5” x 39.5” T-slot rotary table, travels: X –59.05”, Y – 39.37”, Z – 39.37”, ASA 50 spindle taper, speeds to 1300 RPM, 20 HP spindle motor, coolant s/n 880585
CNC HORIZONTAL BORING MILLS
CNC VERTICAL MACHINING CENTERS
CNC EDM
LATHES
TOSHIBA (1994) VMC 85-E CNC VMC with TOSNUC 7 3-2 CNC control, 94.5” x 31” table, travels: X – 78.7”, Y – 33.5”, Z – 27.6”, spindle speeds to 4500 RPM, CAT 50 taper, 40 ATC, 20 HP, coolant, chip conveyor s/n 240707
KITAMURA (1999) MYCENTER 4X CNC VMC with FANUC OM CNC control, 43.5” X 20” table, travels: X – 36”, Y – 20”, Z – 20”, spindle speeds to 6000 RPM, CAT 40 taper, 30 ATC, coolant s/n 20949 HITACHI SEIKI VA65 CNC VMC with FANUC 6M CNC control, 70” X 25” table, travels: X – 50.01”, Y – 25.6”, Z – 25.6”, spindle speeds to 4000 RPM, CAT 50 taper, 30 ATC, coolant s/n VA65020
STANKO 3A725 hydraulic surface grinder with 79” X 24.5” magnetic chuck, incremental down feed, coolant s/n 2109
JONES & SHIPMAN 540 6” X 18” hydraulic surface grinder s/n BO-96589
(2) KENT KGS200 6” X 12” manual surface grinders s/n 860251-1, 830665-2
PEDERSEN USL tool & cutter grinder s/n 1771151
HASCO A190 tool grinder s/n 3048
KUNMING KX M10 tool grinder s/n 0179
HASBERG FS25 tool grinder s/n 2336 system
AIR COMPRESSORS & DRYERS
GRINDERS
MILLING MACHINES
91” x 48” x 32” TANK
3
TOSHIBA VMC 85-E CNC VMC HITACHI SEIKI VA65 CNC VMC
LIFTRITE LT132 2000 lbs. electric die lift s/n 201LIFTRITE LT68 2000 lbs. electric die lift s/n 1029
PRESTOLIFT 566 2000 lbs. electric die lift s/n 0381
CSEPEL HFR/75-2000 6’ radial arm drill with 15” column, (2) box tables s/n 17034
ROYAL VARISET tool presetter s/n n/a
BOSCH hydraulic power pack with (2) 20 HP motors
JET BDS610 combination belt & disk sander s/n 600DP2
DUSTKOP dust collector
MATERIAL HANDLING
RADIAL ARM DRILL
MONTI MCS 85 CNC table type HBM
EATON YALE GLC C120 SBS096 11800 lbs. LPG forklift with 132” vertical lift, side shift s/n 35397-3
MOTIVATION 10000 lbs. rolling gantry crane with 172” span, 147’ under the beam, WESTWARD 10000 lbs. electric hoist, BEEBE 10000 lbs. electric hoist
MOTIVATION 10000 lbs. rolling gantry crane with 172” span, 147’ under the beam, (2) JET 10000 lbs. electric hoists
MOTIVATION 4000 lbs. rolling gantry crane with 174” span, 120” under the beam, C&M 4000 lbs. electric hoist, P&H 2000 lbs. electric hoist
CUSTOM est. 2000 lbs. rolling gantry crane with 136” span, 120” under the beam, 2000 lbs. electric hoist
BUDGIT 4000 lbs. free standing jib arm with electric hoist
KITAMURA MYCENTER 4X CNC VMC TOSHIBA BTD-11 CNC table type HBM
KENT 6” X 12” manual surface grinders
MISC
94” x 54” TABLE 70” x 25” TABLE
47.5” X 39.5” ROTARY TABLE
19994.3” SPINDLE
PROXY BIDDINGIf you are unable to attend this auction,
we would be pleased to act as your proxy. Please contact our office at (416) 962-9600
or visit our website for a proxy bid form, terms and additional information.
www.corpassets.com
Printed in Canada. ©2009 CORPORATE ASSETS INC. ALL RIGHTS RESERVED.
MEMBER IN GOOD STANDING
2 DAY SALE!!!
Surplus Machinery and Equipment to the Ongoing Requirements of HUSKY INJECTION MOLDING SYSTEMS LTD.State of the art high precision machining facilityBolton, Ontaio, CanadaTuesday, March 23 and Wednesday, March 24, 20109:00 A.M. EST (Daily)
PRECISION CHOMEDEY INC.Assets of a High Precision CNC Parts ManufacturerLaval, Quebec, CanadaThursday, March 4, 201010:30 A.M. EST
2 DAY SALE!!!KOREX DON VALLEY ULC(A FORMER UNI-LEVER CO-PACKER)Liquid & Powder Detergent and Bar Manufacturer & PackagerToronto, Ontario, CanadaTuesday, February 23 and Wednesday, February 24, 2010 9:00 A.M. EST (Daily)
DAWN MOULDSMachine ToolsScarborough, Ontario, CanadaTuesday, March 2, 201010:30 A.M. EST
Surplus to the ongoing needs ofCGC, LTD.Large Capacity Gear ManufacturerCambridge, Ontario, CanadaComing April 2010
BEYOND THE SCREEN DOOR INC.Large offering of Finished Screen Doors, Woodworking Equipment and Work in Progress Huron Park (London), Ontario, CanadaThursday, February 25, 201010:30 A.M. EST
ONSITE
TOS SN 50 gap bed engine lathe
PEDERSEN USL tool & cutter grinder
Tool Holders & Milling Head
View of Material Handling Equipment
View of Machine Accessories
Partial View Of Milling Machines Available COMAIRCO 15HP air compressor
CSEPEL HFR/75-2000 6’ radial arm
ALSO: 10’ X 12’ portable office, granite & steel surface plates, work benches, vices, stands, carts, cabinets, angle plates to 48” X 24”, parallels, magnets, racks, etc.
6 AVAILABLE
APPRAISAL SERVICESWhat’s the real value of your equipment? If you require a detailed appraisal for banking, insurance, or internal purposes,
consult with the certified experts at Corporate Assets Inc. We provide appraisal services anywhere in the world for all types of industrial manufacturing and processing equipment. Call us in complete confidence today with your requirements.
(416) 962-9600 [email protected]
®
INSPECTIONMonday, March 8, 2010 from 9:00 AM to 5:00 PM and morning of auction day. REMOVALSmall items: Wednesday, March 10, 2010by 5:00 P.M.Remaining items: Tuesday, March 23, 2010by 5:00 P.M. DIRECTIONSVisit our website at www.corpassets.comclick on Upcoming Auctions: Surplus to the Ongoing Needs of Scepter Corporation button, click on Map tab and get directions by accessing the pop up address info box.
ACCOMMODATIONS & CAR RENTALSPlease visit our website for details at www.corpassets.comPAYMENTPlease visit our website for details atwww.corpassets.comA Buyer’s Premium will apply at this sale.
WeAcceptVisit our website for specifi c terms and conditions
TERMSCorporate Assets Inc. assumes no liability for errors or omissions in this brochure. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction asit may deem appropriate. All subject to prior sale.
What’s the real value of your equipment? If you require a detailed appraisal for banking, insurance, or internal purposes, consult with the certifi ed experts at Corporate Assets Inc. We provide appraisal services anywhere in the world for all types of industrial manufacturing and processing equipment.
• We will appraise one machine or your complete plant
• Going Concern, Fair Market orLiquidation Values
Call us in complete confi dence today with your requirements.
Phone: (416) 962-9600Fax: (416) 962-9601Email: [email protected]
AUCTION DETAILS
APPRAISAL SERVICES
AUCTION CONDUCTED BY CORPORATE ASSETS INC.For further information contact us at:
2 St. Clair Ave. W., Suite 1002Toronto, Ontario, Canada M4V 1L5
Tel: (416) 962-9600 • Fax: (416) 962-9601 Email: [email protected]: www.corpassets.com
Toronto • Montreal • Chicago