1. what is impression evidence? -...
TRANSCRIPT
T. Trimpe 2009
1. What is impression evidence?
Impression evidence can be generally defined as
characteristics of other objects through direct
against another material with enough ______________
Shoeprints, ______________ marks, tire ______________
examples of impression evidence.
Impressions may be found in or on many different types of
depends on the object making the impression
type of material it is (soil, mud, dust, concrete, grass, skin, etc.)
2. Collection Methods
Investigators analyze the impression evidence to find unique
objects found in a suspect’s possession to evidence at a crime scene.
Collection of impression evidence can be accomplished using several methods:
2-D: This type of impression is documented using
fingerprint ______________ to be photographed or lifted with
collected using an ______________
3-D: This type of impression can be documented using
involves using dental stone to preserve the dimensional characteristics of the
3. Tire Track Evidence
Tire tracks are important in forensic investigations and are usually found in road
and escape ______________ of other crime scenes. Tracks help investigators identify the type of
left them. Investigators may make ______________
track. They will also take ______________
Features to analyze:
• ______________ pattern
• ______________ & ______________
• Unique characteristics due to the ______________
T. Trimpe 2009 http://sciencespot.net/
Name __________________________________
can be generally defined as ______________ or ______________
characteristics of other objects through direct ______________. Impressions are created when one object is pressed
______________ to leave an impression of the object.
______________, bite marks, and marks on a fired ______________
Impressions may be found in or on many different types of ______________. The ______________
depends on the object making the impression and the ______________ conditions, such as how hard or soft it is and what
type of material it is (soil, mud, dust, concrete, grass, skin, etc.)
Investigators analyze the impression evidence to find unique ____________________ to link shoes, tires, tools, and other
objects found in a suspect’s possession to evidence at a crime scene.
Collection of impression evidence can be accomplished using several methods:
This type of impression is documented using ______________. Some impressions may be dusted
to be photographed or lifted with ______________
______________ dust lifting process.
: This type of impression can be documented using ______________ as well as by ______________
to preserve the dimensional characteristics of the print.
Tire tracks are important in forensic investigations and are usually found in road ______________
f other crime scenes. Tracks help investigators identify the type of
______________ ______________ of a tire or ______________
______________ that can later be used to prove a match.
______________ of the tread pattern
______________ pattern or ______________
Name __________________________________
______________ that have retained the
Impressions are created when one object is pressed
______________ are several
______________ of the impression
conditions, such as how hard or soft it is and what
to link shoes, tires, tools, and other
. Some impressions may be dusted with
______________. They may also be
______________, which
______________ scenes or in the access
f other crime scenes. Tracks help investigators identify the type of ______________ that
______________ ______________ of a
T. Trimpe 2009 http://sciencespot.net/
4. Tool Mark Evidence
Certain ______________ or ______________ may be left on a tool when it is made or used, which can be used to find
matches between evidence at a crime scene and tools or objects found at a suspect’s home.
Tool marks can be classified two ways: ______________ or ______________.
Features to analyze:
• ______________ of the impression
• Ridges or striation ______________
• ______________, such as nicks and chips
• ______________ chips or ______________ shards left on a tool
5. Shoe Print Evidence
Investigators can analyze a shoe print to determine its ______________, or the type and brand of shoe. They will also
look for ______________ characteristics, such as ______________ ______________ and specific ______________ or
______________.
Databases of shoe prints are available for investigators to help them determine the ______________ of shoe to provide
leads for a case.
Depending on the quality of the impression, investigators may be able to determine a person’s ______________ (walking
vs. running) as well as estimate the ______________ of a person based on the impression’s depth.
Features to analyze:
• ______________ patterns, size, and depth
• ______________ patterns caused by the way a person walks
• Material defects or ______________ (nicks, cuts, etc.)
• Other ______________ materials, such as soil, tar, rocks, and paint that would indicate where a person has been
6. Bite Mark Evidence
Investigators can analyze ___________ ___________ for characteristics to help them identify victims or suspects as well
as to exclude others. Marks can be left on a victim’s ______________ or other ______________, such as Styrofoam
cups, gum, or foods. ______________ or ______________ may be left behind that can be tested for ______________.
Dental records including ____-_______ can also provide useful information, especially when attempting to identify a
victim.
Features to analyze:
• ______________ of bite mark (human or animal)
• Characteristics of the ______________ (position, evidence of dental work, wear patterns, etc.)
• ______________ of area to estimate how long ago the bite occurred (old or recent bite)
• Swab for ______________ ______________ for DNA tests
CSI Tool Mark ChallengeIdentify each impression based on your observations of the sample tools.
T. Trimpe 2009 http://sciencespot.net/
CSI Tool Mark Challenge #1Identify each impression based on your observations of the sample tools.
#1 Identify each impression based on your observations of the sample tools.
CSI Tool Mark ChallengeIdentify each impression based on your observations of the sample tools.
T. Trimpe 2009 http://sciencespot.net/
CSI Tool Mark Challenge #2Identify each impression based on your observations of the sample tools.
#2 Identify each impression based on your observations of the sample tools.
T. Trimpe 2009 http://sciencespot.net/
Tool Mark ChallengeTool Mark ChallengeTool Mark ChallengeTool Mark Challenge Teacher Information
Materials Needed: 12 tool (2-4 different types) - Choose a variety of styles and sizes
NOTE: You will want at least 3 of the same tool, but with different characteristics. For example, choose 3 flat
head screwdrivers in various thicknesses and head widths. I happened to have enough spare screwdrivers and
pliers to make up a set with 6 of each one for this activity.
Copies of Tool Mark Challenge worksheet
Rulers
Molding Clay (Dark blue or green works well)
Small plastic plates
Preparation:
1 – Label the tools with numbers and use clay to make impressions for your challenge. If you are going to use the clay
impressions for the challenge, place each one in a plastic bag and label with a letter.
NOTE: I used a digital microscope camera (Dino Lite) to photograph the impressions made by each of the tools and
choose the best ones for the challenge. I printed several copies of the challenge on card stock and laminated them to keep
them in good condition. My "Tool Marks Challenge" is available on the Forensic Science page of my website in the
Impression Evidence section.
2 - For the student groups, I set up 6 stations in my room with 2 tools at each station along with rulers, a slab of clay, and
a plastic plate. The students work in groups and have approximately 5 minutes to document the 2 tools before they rotate
to a new station. They also have an extra time at the end of class to take another look at the tools as well as a little time at
the start of the next class period.
3 - Make copies of the Tool Marks worksheet (one per group.)
Activity:
Day 1:
1 - Give each group a copy of the worksheet and show the first part of the Tool Marks Challenge presentation The
presentation is available on the Forensic Science page of my website in the Impression Evidence section.
2 - Allow time for the groups to visit each of the 6 stations to examine and document each of the tools and its impression.
I tell my students that they may write anything on their worksheet that might help them identify the tool during the
challenge - this includes sketches and traced outlines of the tools.
Day 2:
1 - Pass out the challenge pages - one for each group.
2 - Have the groups use their notes from the previous day to match the tools to the tool mark impressions. You may want
to have the tools and clay available as some groups may want to recheck a few of them.
3 – Allow time for the students to identify the impressions and then check their answers.
NOTE: I have several identification labs that are races – the first group done receives a prize and bragging rights. I
require the groups to have an answer for each item before they can check their answers the first time. I mark the ones
that are incorrect and the students keep working until they get them all correct (or until at least half of the groups are
finished.)
4 - Discuss how tool marks can be used to solve crimes.
T. Trimpe 2009 http://sciencespot.net/
Group Members: ________________________________________________________________________
Goal: Your group will need to examine and document the tool marks made by each of the 12 tools.
At each station, you will need to:
1 – To prepare for the lab, roll the modeling clay into a flat circle that fits inside the plastic plate. Make several
impressions of each tool in your slab of modeling clay.
2 – Use the ruler to record the measurements for each tool and its impression surfaces.
3 – Document any unique characteristics you notice on each tool or its impression. Write your observations on your
worksheet.
4 – After you have documents both of the tools at that station, roll the clay into another ball to prepare for the next group
and wait until it's time to rotate to the next station.
Features to analyze:
• Dimensions of the impression
• Ridges or striation patterns
• Defects, such as nicks and chips
• Paint chips or metal shards left on a tool
Type of Tool: ____________________
Tool # Width of Tip
(mm)
Length of Tip
(mm) Unique Characteristics (Defects, surface marks, etc.)
1
2
3
4
5
6
T. Trimpe 2009 http://sciencespot.net/
Type of Tool: ______________________
Tool # Width of Tip
(mm)
Length of Tip
(mm) Unique Characteristics (Defects, teeth, marks, etc.)
1
2
3
4
5
6
Tool Mark Challenge
A ______
B ______
C ______
D ______
E ______
F ______
G ______
# of
Guesses:
1
2
3
4
5
6
7
8
9
10
H ______
I ______
J ______
K ______
L ______
T. Trimpe 2010 http://sciencespot.net/
Bite Mark Impressions - Teacher Information
Materials: Small Styrofoam plates (1 per student)
Permanent Markers (1 per student)
Rulers (1 per student)
Assortment of soft candies (Swedish fish, orange slices, Laffy Taffy, circus peanuts, etc.)
Overhead Transparencies (Cut into fourths)
Timer
Directions:
Part 1: Make an Impression
Distribute Styrofoam plates and permanent markers to each
student Instruct students to bend the plate in half so that the top of
the plate is on the inside. They need to label one half with
"maxilla" and one half with "mandible".
Demonstrate how to make a bite mark impression on the plate.
Students will need to put the folded plate into their mouth as fall
as possible and bite down on it to make a good impression. They
should not bite too deep as to break through the plate.
Provide each student with a piece of clear transparency and a
permanent marker. They will need to place the plastic on top of
their impression on the plate and use a permanent marker to trace
the dental pattern onto the plastic as accurately as possible.
Have students unbend the plate and use a ruler to make the
required measurements for width and depth of the impressions on
both jaws. They will also need to note any unique characteristics
they observe, such as slanted teeth, spaces, evidence of braces,
etc.
Part 2: Tasty Testing
Pass out one piece of one type of soft candy to each student.
Instruct students to gently bite into each piece of candy in order to make an impression, but not
too hard to bite it in half.
Have the students record a rating for the quality of the impression (poor, fair, good) along with
their observations, such as candy sticking to their teeth or whether or not it was too hard/soft to
make a good impression.
Repeat the testing with the other types of soft candy available.
NOTE: Circus peanuts and Laffy Taffy seemed to work the best for our impressions.
Challenge (Optional)
To prepare for the challenge, provide each student with one circus
peanut. Have them bite into it (with the top of the candy facing into their
mouth) to leave an impression and label the top with MX for maxilla and
MN for mandible. Have students hand in their candy piece. Use a
permanent marker to write a number on the bottom of the candy. Use the
T. Trimpe 2010 http://sciencespot.net/
chart to keep a list of student names and numbers to check the challenge answers.
For the challenge, divide students into groups of 3-4 students. For each group, have them find all the
correct candy pieces using their Styrofoam plates and overlays. Keep track of the amount of time it
takes each group to complete the challenge.
Note: Be sure to have the groups search through all the candy pieces each time. Do not remove the ones
that have already been identified.
Challenge Key
Number Name Number Name
1
16
2
17
3
18
4
19
5
20
6
21
7
22
8
23
9
24
10
25
11
26
12
27
13
28
14
29
15
30
T. Trimpe 2010 http://sciencespot.net/
Bite Mark ID Name ___________________________
Part 1: Make an Impression
Follow the directions to create a bite mark impression. Use a ruler to make the
measurements needed to the nearest tenth of a centimeter and record your data in the
table below along with any notes regarding unique characteristics you observe in the
teeth.
Jaw Width Depth Unique Characteristics
Maxilla
Mandible
Part 2: Tasty Testing
Follow the directions and record your data below.
Type of
Candy
Quality
(Poor, fair, good) Observations
Part 3: Write a paragraph to summarize what you have learned about bite mark
impressions during this activity.
Idea submitted by Sandy Powell Worksheet by T. Trimpe 2007 http://sciencespot.net/
Tire TracksTire TracksTire TracksTire Tracks ChallengeChallengeChallengeChallenge Teacher Information
Materials Needed: 8-12 toy cars (Hot Wheels or Matchbox size work best, look for
distinct types of tires or use some tools to create your own
wear patterns on them)
Large white construction paper
Copies of Tire Tracks worksheet
Ink pads
Preparation:
1 – Label the cars with letters. As you create the original tracks in the next step, make a key for your records showing
which numbers on the Tire Tracks worksheet correspond to the letters on the cars.
2 - Roll the tires of each car on the ink pad and then roll across the Tire Tracks worksheet. Be sure to label the cars to help
you keep track of each set. If there is not enough space on the worksheet, make the tracks on another piece of paper and
cut/paste a good sample the best tracks into the boxes.
NOTE from T. Trimpe: A sample of my Tire Track Challenge is available on page 3 of this document.
3 - Make copies of the Tire Tracks Challenge worksheet (one per group.)
Activity Directions:
Day 1: 1 - Give each group a large sheet of construction paper along with rulers & paper towels.
NOTE from T. Trimpe: A PowerPoint to introduce the activity and challenge is available on the
Forensic Science page of my website in the Impression Evidence section.
2 - Give one car to each group and an ink pad. Allow time for each group to make a set of tracks on a plain white sheet of
paper. Have the groups pass around the cars so each group has a sample for each car. Save the sample tracks for the
challenge activity during the next class period.
NOTE from T. Trimpe: I set up 6 sets of cars (3 cars in each set) that can be passed around the room from
group to group. You might also consider setting up stations around your room. Place a few cars and one ink pad
at each station. Have the groups rotate through the stations to create their own tracks.
Day 2: 1 - Pass out copies of the Tire Tracks Challenge page and allow time for the students to identify the tracks and then check
their answers.
NOTE from T. Trimpe: I have several identification labs that are races – the first group done receives a prize
and bragging rights. I require the groups to have an answer for each item before they can check their
answers the first time. I mark the ones that are incorrect and the students keep working until they get them all
correct (or until at least half of the groups are finished.) To make it more challenging, provide more than 8
cars. The students will need to create tracks from all of the cars, but only some of them will be matches.
2 - Discuss how tire tracks can be used to solve crimes.
Extension Idea from T. Trimpe: Thanks to Chris Taylor, my favorite mechanic, I have a set of 10 actual tire
treads that I have the students use to make ink prints. They use black tempera paint (thinned with a little water)
and sponge brushes to coat the tread and make prints on pieces of white paper. I hang several "Mystery Tracks"
in my room that I made before class and see if the kids can match them to the real treads.
NOTE from T.Trimpe: I use the micropore ink
pads available from Quill – Item # 901-21281. The
ink pad is made from a harder material than the
standard foam pads and holds up well to repeated
use for this lab.
Idea submitted by Sandy Powell Worksheet by T. Trimpe 2007 http://sciencespot.net/
Group Members: ____________________________________________
Work with your investigative team to identify each set of tracks shown
below. Use the cars provided, ink pads, and white paper to make a set of
sample tracks. Compare your tracks with the ones shown below and
then write the letters in each box to show the matches.
#1 #2
#3 #4
#5 #6
#7 #8
Idea submitted by Sandy Powell Worksheet by T. Trimpe 2007 http://sciencespot.net/
Group Members: ___________________________________________
Work with your investigative team to identify each set of tracks shown
below. Use the cars provided, ink pads, and white paper to make a set of
sample tracks. Compare your tracks with the ones shown below and
then write the letters in each box to show the matches.