vertical fold tool bars d-5 - bigham agbigham...

Vertical Fold Tool Bars D-5 Front View L C L Top View C Vertical Fold Double Bar Bigham Vertical Fold Tool Bars give you an economical way to reduce your transport width with legendary Bigham quality. Available in double 7x7” bars to triple and quad bars with combinations of 4x7” and 4x4” tubes, these tool bars give you the flexibility to outfit wide tools you can safely transport. © 2013 Bigham. Design and specifications subject to change without notice. Standard Features: • 4 x 48" Hydraulic cylinder provides capacity to lift any wing load with reduced operating pressure. Wings fold up and cylinder locks into closed position for positive transport. • Diamond mast design is enhanced by one piece stringer plates (braces) cut from solid 5/8" plate. This design also centers cylinder and lifting lug between the bars of the wing. All tool bars are welded using pulse arc technology to minimize cracks near welds. • Heavy duty in-line hinge incorporates 14 hinge ears per side on the double bar frame. (21 per side on triple bar frames.) Ears are cut from 1" plate. Hinge pins are a full 1-7/16" in diameter. • Heavy duty hinge with 2” hinge pin sets hinge above the tool bar and allows a degree of fold over center. Strip Till on Double 7x7 Folding Tool Bar

Upload: vubao

Post on 12-Apr-2018

215 views

Category:

Documents

3 download

Report

Download

Embed Size (px):

TRANSCRIPT

Vertical Fold Tool Bars D-5

Front View

Top ViewC

Vertical Fold Double Bar

Bigham Vertical Fold Tool Bars give you an economical way to reduce your transport width with legendary Bigham quality.Available in double 7x7” bars to triple and quad bars with combinations of 4x7” and 4x4” tubes, these tool bars give you the flexibility to outfit wide tools you can safely transport.

Standard Features:•4 x 48" Hydraulic cylinder

provides capacity to lift any wing load with reduced operating pressure.Wingsfoldupandcylinderlocksintoclosedpositionforpositivetransport.

•Diamond mast design is enhanced by one piece stringer plates(braces)cutfromsolid5/8"plate.Thisdesignalsocenterscylinderandliftinglugbetweenthebarsofthewing.Alltoolbarsareweldedusingpulsearctechnologytominimizecracksnearwelds.

•Heavy duty in-line hingeincorporates14hingeearspersideonthedoublebarframe.(21persideontriplebarframes.)Earsarecutfrom1"plate.Hingepinsareafull1-7/16"indiameter.

•Heavy duty hinge with 2” hinge pin setshingeabovethetoolbarandallowsadegreeoffoldovercenter.

Strip Till on Double 7x7

Folding Tool Bar

Page 2: Vertical Fold Tool Bars D-5 - Bigham AgBigham Agbighamag.com/.../uploads/2013/10/D-05-Vertical-Fold-Tool-Bars.pdf · Vertical Fold Tool Bars D-5 Front View CL L Top View C Vertical

D-6

Bigham offers a wide selection of tool bars. Please call for custom order information.

Vertical Fold Tool Bars

Transport Lockisstandardequipmentonmostverticalfoldtoolbars.Thissafetymeasurecouldpreventinjuryorequipmentdamagewhiletransportingimplementfromonefieldtothenext.

Standard Hinge withsevenearsperhinge.

Heavy Duty Hinge with 2” hinge pin.

Eyebolt Adjusting Kit forwingliftlugisstandardequipmentonalltoolbars.Linkagemaybeadjustedsothatwingwillnotfloatpasttheflatposition.4x48” Cylinderliftstheheaviestloads.

Vertical Tool Bar with Heavy Duty Hinge2 Inch Hinge Pin Mounted Above Bar

Unique Eyebolt Adjusting Kit allows up float, down float, or both.

4x48” Cylinder lifts the heaviest loads.

Triple 4x4” Barwith Heavy Duty Option.

Vertical Tool Bar with In-Line Heavy Duty

Hinge

Five Section Double-Fold Tool Bar. Narrow Center Section and Flat Fold Wings for Reduced Transport Width and Height.

BIGHAM • 705 E. SLATON ROAD • P.O. BOX 3338 • LUBBOCK, TX 79452 • (806) 745-03841220 EAST DURKEE STREET • CARLISLE, AR 72024 • (870) 552-7517

3D Ursula Papercraft - Disney Family · 3D Ursula Papercraft Page 2 of 3 Right arm Left arm Fold Fold Fold Fold Fold Fold Fold Fold Tentacles © Disney

East Hampton/Riverhead - Optimum · FOLD-----FOLD-----FOLD FOLD-----FOLD----- FOLD----- FOLD----- Key Broadcast Basic Optimum Core Optimum Value Optimum Preferred/ Hallmark Movies

Donald Duck Fold Fold Fold Fold Fold

Written By: Stephaney Ferguson - Amazon Web Services · Fold the edges onto the inside cover of the textbook starting with the top of the book cover. Fold the vertical edge of the