Resume 2013 (Eysa Salajegheh)

Personal: Name: Eysa Salajegheh Address: Home: No. 12- 1st Street, Amir Kabir Bld., University Housing, Kerman, Iran. Tel: +98-341-2111342 Office: Department of Civil Engineering, Shahid Bahonar University of Kerman, Kerman, Iran. Tel: +98-341-3220054, ext. 2660, Fax: +98-341-3220054 E-mail: eysasala@mail.uk.ac.ir Date of Birth: December 8, 1951 Nationality: Iranian Marital Status: Married, Three Children Education:

1977-1981 Received Ph.D. in Civil Engineering from Surrey University, Guildford, Surrey, England, 1981.

Thesis: "Optimum Design of Double Layer Grids". 1976-1977 Received M.Sc. in Structural Engineering from Surrey University, Guildford,

Surrey, England, 1977, with Distinction. Thesis: "An Analytical Study of a Double Layer Grid...". 1971-1975 Received B.Sc. in Civil Engineering from Iran University of Science and

Technology, Tehran, Iran, 1975, First-Ranked Student among 125 Graduates.

2

Experience: 2000-present Head of Civil Engineering Graduate Studies of Islamic Azad University of

Kerman, Kerman, Iran. Vice-Chair of Kerman City Council (2003-2005) + Chair of Kerman Province

Council (2005-2008) + Chair of Kerman County Council (2006-2013). Teaching Graduate Courses in Dynamics of Structures and Earthquake

Engineering, Optimum Design of Structures, Finite Element Methods 1 & 2, Nonlinear Finite Element, Advanced Steel Design, Advanced Structural Dynamics, Stability of Structures, Space Structures, Design of Tall Buildings, Advanced Optimum Design of Structures, Soft Computing, Theory of Plates and Shells. Teaching Undergraduate Courses in Analysis and Deisgn of Steel Structures 1 & 2, Analysis and Design of Concrete Structures 1 & 2, Steel Design Projects, Concrete Design Projects.

Performing Research in Structural Optimization. Supervising Graduate and Undergraduate Students. Title: Professor 1994-2000 Graduate Vice Chancellor of the Shahid Bahonar University of Kerman, Iran. Teaching Graduate Courses in Matrix Structural Analysis, Dynamics of

Structures and Earthquake Engineering, Optimum Design of Structures, Finite Element Methods 1 & 2, Advanced Steel Design, Advanced Structural Dynamics, Space Structures, Stability of Structures, Design of Tall Buildings, Advanced Optimum Design of Structures. Teaching Undergraduate Courses in Structural Analyses 1 & 2, Analysis and Design of Steel Structures 1 & 2, Steel Design Projects, Concrete Design Projects.

Performing Research in Structural Optimization. Supervising Graduate and Undergraduate Students. Title: Professor (Since March 1996) 1992-1994 Dean of College of Engineering, Shahid Bahonar University of Kerman, Iran. Teaching Graduate Courses in Optimum Design of Structures, Finite

Element Methods. Teaching Undergraduate Courses in Structural Analyses 1 & 2, Matrix Structural Analysis, Dynamics of Structures and Earthquake Engineering, Design of Steel Structures 1 & 2, Steel Design Projects, Concrete Design Projects.

Performing Research in Sructural Optimization.

3

Supervising Graduate and Undergraduate Students. Title: Associate Professor

1991-1992 Sabbatical Leave at the University of California, Santa Barbara, United

States of America, Carrying Out Research in Structural Optimization. 1986-1991 Academic and Research Assistant to the Dean of College of Engineering,

Shahid Bahonar University of Kerman, Iran. Teaching Undergraduate Courses in Strength of Materials, Structural

Analysis 1 & 2, Matrix Methods of Structural Analysis, Design of Steel Structures 1 & 2, Advanced Steel Design, Dynamics of Structures and Earthquake Engineering, Steel Design Projects, Concrete Design Projects.

Performing Research in Structural Optimization and Earthquake Engi-

neering.

Supervising Undergraduate Students. Title: Associate Professor. 1985-1986 Sabbatical Leave at the University of California, Santa Barbara, United

States of America, Carrying Out Research in Structural Optimization. 1981-1985 Head of Civil Engineering Department and Assistant to the Dean of College

of Engineering, Shahid Bahonar University of Kerman, Kerman, Iran. Teaching Undergraduate Courses in Structural Analysis 1& 2, and Matrix

Structural Analysis. Performing Research in Structural Optimization.

Supervising Undergraduate Students. Title: Assistant Professor.

4

Publications: Journals:

1. Eysa Salajegheh, Garret N. Vanderplaats, “An Efficient Approximation Method for Structural Synthesis with Reference to Space Structures”, International Journal of Space Structures, 2, 165-175, 1987.

2. Garret N. Vanderplaats, Eysa Salajegheh, “An Efficient Approximation Technique for Frequency Constraints in Frame Optimization”, International Journal for Numerical Methods in Engineering, 26(5), 1057-1069, 1988.

3. Garret N. Vanderplaats, Eysa Salajegheh, “A New Approximation Method for Stress Constraints in Structural Synthesis”, Journal of The American Institute of Aeronautics and Astronautics, 27(3), 352-358, 1989.

4. Eysa Salajegheh, Garret N. Vanderplaats, “Efficient Optimum Design of Structures with Discrete Design Variables”, International Journal of Space Structures, 8(3), 199-208, 1993.

5. Eysa Salajegheh, Garret N. Vanderplaats, “Optimum Design of Trusses with Discrete Sizing and Shape Variables”, Journal of Structural and Multidisciplinary Optimization, 6(2), 79-85, 1993.

6. Eysa Salajegheh, “A Two Level Approximation Technique for Structural Optimization”, International Journal of Engineering, 7(2), 85-93, 1994.

7. Eysa Salajegheh, “Optimum Design of Plate and Shell Structures with Discrete Design Variables”, Asian Journal of Structural Engineering, 1(1), 1-15, 1995.

8. Eysa Salajegheh, “Approximate Discrete Variable Optimization of Plate Structures Using Dual Methods”, International Journal of Structural Engineering and Mechanics, 3(4), 359-372, 1995.

9. Eysa Salajegheh, “Approximate Discrete Variable Optimization of Frame Structures with DuaL Methods”, International Journal for Numerical Methods in Engineering, 39(9), 1607-1617, 1996.

10. Eysa Salajegheh, “Optimum Design of Structures with Reference to Space Structures”, International Journal of Space Structures, 10(4), 205-214, 1995.

11. Eysa Salajegheh, Javad Salajegheh, “Continuous and Discrete Optimization of Dam's Outlet Gates via Penalty Approaches and Approximation Concepts”, Amir Kabir Journal of Science and Technology, 8(29), 21-34, 1995.

12. Eysa Salajegheh, “Optimum Design of Structures with Frequency Constraints”, Asian Journal of Structural Engineering, 1(3), 243-254, 1995.

5

13. Eysa Salajegheh, “Discrete Variable Optimization of Plate Structures Using Dual Methods”, International Journal of Computers and Structures, 58(6), 1131-1138, 1996.

14. Eysa Salajegheh, “Approximate Discrete Variable Optimization of Frame Structures with Dual Methods”, International Journal for Numerical Methods in Engineering, 39(9), 1607-1617, 1996.

15. Eysa Salajegheh, “Discrete Variable Optimization of Plate Structures Using Penalty Approaches and Approximation Concepts”, Journal of Engineering Optimization, 26(3), 195-205, 1996.

16. Eysa Salajegheh, “Optimum Design of Plate Structures with Frequency Constraints”, Engineering Computations, International Journal for Computer - Aided Engineering and Software, 14(8), 869-882, 1997.

17. Eysa Salajegheh, “Structural Optimization Using Response Approximation and Optimality Criteria Methods”, Journal of Engineering Structures, 19(7), 527-532, 1997.

18. Eysa Salajegheh, “Efficient Optimum Design of Structures with Frequency Response Constraints Using High Quality Approximation”, International Journal of Engineering, 10(2), 61-69, 1997.

19. Eysa Salajegheh, “Optimum Design of Plate Structures Using Three Point Approximation”, Journal of Structural and Multidisciplinary Optimization, 13(2-3), 142-147, 1997.

20. Eysa Salajegheh, “Optimum Design of Plate Structures with Frequency Constraints”, Journal of Engineering Computations, 14(8), 869-882, 1997.

21. Eysa Salajegheh, “Optimum Shape Design of Three Dimensional Continuum Structures Using Second Order Approximation”, Scientia Iranica, 6(3-4), 219-224, 1999.

22. Eysa Salajegheh, “Optimum Design of Frame Structures Using Two - Point Response Approximation”, Iranian Journal of Science and Technology, Transaction B: Technology, 24(1), 9-10, 2000.

23. Eysa Salajegheh, “Optimum Design of Structures with High Quality Approximation of Frequency Constraints”, Journal of Advances in Engineering Software, 31(6), 381-384, 2000.

24. Eysa Salajegheh, “Optimum Design of Steel Space Frames with Frequency Constraints Using Three - Point Rayleigh Quotient Approximation”, Journal of Constructional Steel Research, 54(2), 305-313, 2000.

6

25. Eysa Salajegheh, Javad Salajegheh, “Continuous - Discrete Optimization of Space Structures Using Approximation Methods”, International Journal of Space Structures, 16(4), 237-251, 2001.

26. Eysa Salajegheh, Javad Salajegheh, “Optimum Design of Structures with Discrete Variables Using Higher - Order Approximation”, Journal of Computer Methods in Applied Mechanics and Engineering, 191(13-14), 1395-1419, 2002.

27. Eysa Salajegheh, Javad Salajegheh, “Optimum Design of Space Structures with Penalty Functions and Approximate Structural Analysis”, Journal of Engineering, Ferdowsi University of Mashhad, 14(1), 81-91, 2002.

28. Eysa Salajegheh, Ali Heidari, “Dynamic Analysis of Structures against Earthquake by Combined Wavelet Transform and Fast Fourier Transform”, Asian Journal of Structural Engineering, 3, 75-87, 2002.

29. Eysa Salajegheh, Javad Salajegheh, Ali Heidari, “Continuous - Discrete Optimization of Structures Using Approximation Methods”, International Journal of Engineering, Transactions A: Basics, 17 (3), 227-242, 2004.

30. Eysa Salajegheh, Ali Heidari, Saeid Saryazdi, “Dynamic Analysis of Structures by Fast Wavelet Transform”, International Journal of Science and Technology, 2004.

31. Eysa Salajegheh, Ali Heidari, “Optimum Design of Structures against Earthquake by Adaptive Genetic Algorithm Using Wavelet Networks”, Journal of Structural and Multidisciplinary Optimization, 28(4), 277-285, 2004.

32. Eysa Salajegheh, Ali Heidari, Saeid Saryazdi, “Optimum Design of Structures against Earthquake by Discrete Wavelet Transform”, International Journal for Numerical Methods in Engineering, 62(15), 2178-2192, 2005.

33. Eysa Salajegheh, Ali Heidari, “Time History Dynamic Analysis of Structures Using Filter Banks and Wavelet Transforms”, International Journal of Computers and Structures, 83(1), 53-68, 2005.

34. Eysa Salajegheh, Ali Heidari, “Optimum Design of Structures against Earthquake by Wavelet Transforms and Filter Banks”, Journal of Earthquake Engineering and Structural Dynamics, 34(1), 67-82, 2005.

35. Eysa Salajegheh, Saeid Gholizadeh Ghaleaziz, “Optimum Design of Structures by an Improved Genetic Algorithm Using Neural Networks”, Journal of Advances in Engineering Software, 36(11-12), 757-767, 2005.

36. Ali Heidari, Eysa Salajegheh, “Time History Analysis of Structures for Earthquake Loading by Wavelet Networks”, Asian Journal of Civil Engineering, 7, 155-168, 2006.

37. Eysa Salajegheh, Saeid Gholizadeh Ghaleaziz, Peyman Torkzadeh Mahani, “Optimum Design of Structures with Frequency Constraints Using Wavelet Neural Networks”, Asian Journal of Civil Engineering, 8, 97-111, 2007.

7

38. Ali Heidari, Eysa Salajegheh, “Approximate Dynamic Analysis of Structures for Earthquake Loading Using Fast Wavelet Transform”, International Journal of Engineering, Transactions B: Applications, 20(1), 37-47, 2007.

39. Saeid Gholizadeh Ghaleaziz, Eysa Salajegheh, Peyman Torkzadeh Mahani, “Structural Optimization with Frequency Constraints by Wavelet Radial Basis Function Neural Networks”, Journal of Sound and Vibration, 312(1-2), 316-331, 2008.

40. Eysa Salajegheh, Saeid Gholizadeh Ghaleaziz, Mohsen Khatibinia, “Optimal Design of Structures for Earthquake Loads by a Hybrid Radial Basis Function – Binary Particle Swarm Optimization (RBF – BPSO) Method”, Journal of Earthquake Engineering and Engineering Vibration, 7(1), 13-24, 2008.

41. Eysa Salajegheh, Saeid Gholizadeh Ghaleaziz, Akbar Pirmoz, “Self - Organizing Back Propagation Networks for Predicting the Moment - Rotation Behavior of Bolted Connections”, Asian Journal of Civil Engineering, 9(6), 629-645, 2008.

42. Javad Salajegheh, Eysa Salajegheh, Seyyedmohammad Seyyedpour, “Optimum Design of Socket Joint Systems for Space Structures Using Second Order Approximation Method”, International Journal of Space Structures, 23(1), 35-43, 2008.

43. Peyman Torkzadeh Mahani, Eysa Salajegheh, Javad Salajegheh, “Efficient Methods for Structural Optimization with Frequency Constraints Using Higher Order Approximations”, International Journal of Structural Stability and Dynamics, 8(3), 439-450, 2008.

44. Peyman Torkzadeh Mahani, Eysa Salajegheh, Javad Salajegheh, “Optimum Design of Steel Framed Structures Including Determination of the Best Position of Columns”, Journal of Steel and Composite Structures, 8, 1-17, 2008.

45. Ali Heidari, Eysa Salajegheh, “Wavelet Analysis for Processing of Earthquake Records”, Asian Journal of Civil Engineering, 9, 513-524, 2008.

46. Saeid Gholizadeh Ghaleaziz, Javad Salajegheh, Eysa Salajegheh, “An Intelligent Neural System for Predicting Structural Response Subject to Earthquakes”, Journal of Advances in Engineering Software, 40(8), 630-639, 2009.

47. Ali Heidari, Eysa Salajegheh, “Wavelet Analysis for Processing of Earthquake Records”, Asian Journal of Civil Engineering, 10 (4), 397-408, 2009.

48. Eysa Salajegheh, Mostafa Mashayekhi, Mohsen Khatibinia, Mahdi Kaykha, “Optimum Shape Design of Space Structures by Genetic Algorithm”, International Journal of Space Structures, 24(1), 45-57, 2009.

49. Seyedmohammad Seyyedpour, Javad Salajegheh, Eysa Salajegheh, Saeid Gholizadeh Ghaleaziz, “Optimum Shape Design of Arch Dams for Earthquake Loading Using Fuzzy Inference System and Wavelet Neural Networks”, Journal of Engineering Optimization, 41(5), 473-493, 2009.

8

50. Saeid Gholizadeh Ghaleaziz, Eysa Salajegheh, “Optimal Design of Structures for Time History Loading by Swarm Intelligence and an Advanced Metamodel”, Journal of Computer Methods in Applied Mechanics and Engineering, 198 (37-40), 2936-2949, 2009.

51. Eysa Salajegheh, Javad Salajegheh, Seyyedmohammad Seyyedpour, Mohsen Khatibinia, “Optimal Design of Geometrically Nonlinear Space Trusses Using Adaptive Neuro - Fuzzy Inference System”, Scientia Iranica, 16(5A), 403-414, 2009.

52. Saeid Gholizadeh Ghaleaziz, Eysa Salajegheh, “Optimal Design of Structures for Earthquake Loading by Self Organizing Radial Basis Function Neural Networks”, Journal of Advances in Structural Engineering, 2010.

53. Seyyedmohammad Seyyedpour, Javad Salajegheh, Eysa Salajegheh, “Shape Optimal Design of Arch Dams Including Dam – Water - Foundation Rock Interaction Using a Grading Strategy and Approximation Concepts”, Journal of Applied Mathematical Modelling, 34(5), 1149-1163, 2010.

54. Saeed Gholizadeh Ghaleaziz, Eysa Salajegheh, “Optimal Seismic Design of Steel Structures by an Efficient Soft Computing Based Algorithm”, Journal of Constructional Steel Research, 66(1), 85-95, 2010.

55. Saeid Gholizadeh Ghaleaziz, Eysa Salajegheh, “Optimal Design of Structures for Earthquake Loading by Self Organizing Radial Basis Function Neural Networks”, Journal of Advances in Structural Engineering, 13(2), 339-356, 2010.

56. Seyyedmohammad Seyyedpour, Javad Salajegheh, Eysa Salajegheh, “Shape Optimal Design of Arch Dams Including Dam – Water - Foundation Rock Interaction Using a Grading Strategy and Approximation Concepts”, Applied Mathematical Modelling, 34(5), 1149-1163, 2010.

57. Seyyedmohammad Seyyedpour, Javad Salajegheh, Eysa Salajegheh, Saeid Gholizadeh Ghaleaziz, “Optimal Design of Arch Dams Subjected to Earthquake Loading by a Combination of Simultaneous Perturbation Stochastic Approximation and Particle Swarm Algorithms”, Journal of Applied Soft Computing, 11(1), 39-48, 2011.

58. Mostafa Mashayekhi, Mohammadjavad Fadaee, Javad Salajegheh, Eysa Salajegheh, “Topology Optimization of Double Layer Grids for Earthquake Loads Using a Two – Stage Evolutionary Structural Optimization and Ant Colony Optimization (ESO-ACO) Method”, International Journal of Optimization in Civil Engineering, 2, 211-232, 2011.

59. Mostafa Mashayekhi, Javad Salajegheh, Mohammadjavad Fadaee, Eysa Salajegheh, “A Two - Stage Solid Isotropic Material with Penalization and Ant Colony Optimization (SIMP-ACO) Method for Reliability - Based Topology Optimization of Double Layer Grids”, International Journal of Optimization in Civil Engineering, 4, 521-542, 2011.

9

60. Seyyedmohammad Seyyedpour, Javad Salajegheh, Eysa Salajegheh, Saeid Gholizadeh Ghaleaziz, “Optimal Design of Arch Dams Subjected to Earthquake Loading by a Combination of Simultaneous Perturbation Stochastic Approximation and Particle Swarm Optimization Algorithms”, Applied Soft Computing Journal, 11(1), 39-48, 2011.

61. Saeid Gholizadeh Ghaleaziz, Eysa Salajegheh, “Soft Computing Based Structural Optimization for Earthquake”, Asian Journal of Civil Engineering, 12(4), 415-429, 2011.

62. Mostafa Mashayekhi, Eysa Salajegheh, Javad Salajegheh, Mohammadjavad Fadaee, “Reliability - Based Topology Optimization of Double Layer Grids Using a Two - Stage Optimization Method”, Journal of Structural and Multidisciplinary Optimization, 45(6), 815-833, 2012.

63. Mohsen Khatibinia, Javad Salajegheh, Mohammadjavad Fadaee, Eysa Salajegheh, “Prediction of Failure Probability for Soil - Structure Interaction System Using Modified Adaptive Neuro Fuzzy Inference System (ANFIS) by Hybrid of Fuzzy C – Means and Fuzzy Particle Swarm Optimization (FCM-FPSO)”, Asian Journal of Civil Engineering, 13(1), 1-27, 2012.

64. Saleheh Gerist, Seyedsadegh Naseralavi, Eysa Salajegheh, “Basis Pursuit Based Genetic Algorithm for Damage Identification”, International Journal of Optimization in Civil Engineering, 2(2), 301-319, 2012.

65. Seyyedmohammad Seyyedpour, Javad Salajegheh, Eysa Salajegheh, “Shape Optimal Design of Materially Nonlinear Arch Dams Including Dam – Water - Foundation Rock Interaction Using an Improved Particle Swarm Optimization Algorithm”, Journal of Optimization and Engineering, 13(1), 79-100, 2012.

66. Seyedsadegh Naseralavi, Eysa Salajegheh, Javad Salajegheh, Mohammadjavad Fadaee, “Detection of Damage in Cyclic Structures Using an Eigenpair Sensitivity Matrix”, Journal of Computers and Structures, 110–111, 43–59, 2012.

67. Mohsen Khatibinia, Eysa Salajegheh, Javad Salajegheh, Mohammadjavad Fadaee, “Reliability - Based Design Optimization of Reinforced Concrete Structures Including Soil - Structure Interaction Using a Discrete Gravitational Search Algorithm and a Proposed Metamodel”, Journal of Engineering Opimization, ifirst, 1-19, 2012.

68. Seyyedsadegh Naseralavi, Eysa Salajegheh, Javad Salajegheh, Milad Ziaee, “A Two - Stage Method for Damage Detection of Large - Scale Structures”, International Journal of Optimization in Civil Engineering, 2(4), 489-510, 2012.

69. Mohsen Khatibinia, Mohammadjavad Fadaee, Javad salajegheh, Eysa Salajegheh, “Seismic Reliability Assessment of Reinforced Concrete Structures Including Soil - Structure Interaction Using Wavelet Weighted Least Squares Support Vector Machine”, Journal of Reliability Engineering and System Safety, 110, 22-33, 2013.

10

70. Seyyedsadegh Naseralavi, Saleheh Gerist, Eysa Salajegheh, Javad Salajegheh, “Elaborate Structural Damage Detection Using an Improved Genetic Algorithm and Modal Data”, International Journal of Structural Stability and Dynamics, (Accepted), 2013.

Book Chapters:

1. Eysa Salajegheh, Javad Salajegheh, “Optimum Design of Structures with Discrete Variables Using Approximation Concepts”, Identification, Control and Optimization of Engineering Structures, Civil - Comp Press, Edinburgh, United Kingdom, 85-93, 2000.

2. Eysa Salajegheh, Ali Heidari, “Optimum Design of Structures for an Induced Earthquake”, Chapter of the book “Intelligent Computational Paradigms in Earthquake Engineering”, N.D. Lagaros and Y. Tsompanakis (Editors), National Technical University of Athens, Greece, Idea Group Incorporation, 2006.

3. Eysa Salajegheh, Saeid Gholizadeh Ghaleaziz, “Optimal Seismic Design of Structures Using Soft Computing Techniques”, in B.H.V. Topping, Y. Tsompanakis, (Editors), “Soft Computing in Civil and Structural Engineering”, Saxe - Coburg Publications, Stirlingshire, United Kingdom, Chapter 5, pp 155-178, 2009.

Conference Presentations:

1. Eysa Salajegheh, “Optimum Design of Double Layer Grids”, 3rd International Conference on Space Structures, University of Surrey, England, 1984.

2. Eysa Salajegheh, “Behavior and Design of Space Structures”, 3rd International Iranian Congress of Civil Engineering, University of Shiraz, Shiraz, Iran, 1990.

3. Eysa Salajegheh, “Efficient Optimum Design of Structures”, 4th International Conference on Space Structures, University of Surrey, England, 1993.

4. Eysa Salajegheh, “Structural Optimization Technique Involving Discrete Design Vari-ables”, 2nd Asian Pacific Conference on Computational Mechanics, University of New South Wales, Sydney, Australia, 1993.

5. Eysa Salajegheh, “Approximate Discrete Variable Optimization of Frame Structures with Dual Methods”, The Energy - Sources Technology Conference, New Orleans, LA, United States of America, 23-26 January, 1994.

6. Garret N. Vanderplaats, Eysa Salajegheh, “Approximation Method for Structural Synthesis with Discrete Sizing and Shape Variables Using Duality Theory”, 35th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Hilton Head, SC, United States of America, 18-20 April, 1994.

11

7. Eysa Salajegheh, “Optimum Design of Plate and Shell Structures with Discrete Design Variables”, 2nd International Conference on Computational Structures Technology, Athens, Greece, 30 August - 1 September, 1994.

8. Eysa Salajegheh, “Continuous - Discrete Variables Optimization of Plate and Shell Structures Using Force Approximation”, The Energy - Sources Technology Conference and Exhibition, Houston, TX, United States of America, 29 January - 1 February, 1995.

9. Eysa Salajegheh, “Discrete Optimization of Plate Structures Using Penalty Approaches and Approximation Concepts”, 1st World Congress of Structural and Multidisplinary Optimization, Goslar, Germany, 28 May-2 June, 1995.

10. Eysa Salajegheh, “Discrete Optimization of Plate Structures Using Penalty Approaches and Approximation Concepts”, 6th International Conference on Computing in Civil and Building Engineering, Berlin, Germany, 12-15 July, 1995.

11. Eysa Salajegheh, “Optimum Design of Structures with Reference to Space Structures”, International Conference on Light Weight Structures in Civil Engineering, Warsaw, Poland, 25-29 September, 1995.

12. Eysa Salajegheh, Javad Salajegheh, “Efficient Discrete Synthesis of Skeletal Structures with Reference to an Outlet Gate”, 6th International Conference on Civil and Structural Engineering Computing, Edinburgh, United Kingdom, 1995.

13. Eysa Salajegheh, “Optimum Design of Plate Structures with Frequency Constraints”, 1st World Conference on Integrated Design and Process Technology, University of Texas at Austin, United States of America, 7-9 December, 1995.

14. Eysa Salajegheh, Javad Salajegheh, “Discrete Structural Optimization via Force Approximation and Penalty Approaches”, 26th Annual Iranian Mathematics Conference, Shahid Bahonar University of Kerman, Kerman, Iran, 1995.

15. Eysa Salajegheh, “Optimum Design of Structures with Frequency Constraints”, 2nd International Conference on Seismology and Earthquake Engineering, Tehran, Iran, 1995.

16. Eysa Salajegheh, “Optimum Design of Frame Structures Using Two - Point Force Approximation”, 2nd International Conference in Civil Engineering on Computer Applications Research and Practice, Manama, Bahrain, 6-8 April, 1996.

17. Eysa Salajegheh, “Optimum Design of Plate Structures Using Three Point Approximation”, 3rd Biennial Joint Conference on Engineering Systems Design and Analysis, Montpellier, France, 1-4 July, 1996.

18. Eysa Salajegheh, “Efficient Optimum Design of Structures with Frequency Response Constraints Using High Quality Approximation”, 3rd International Conference on Computational Structures Technology, Budapest, Hungary, 21-23 August, 1996.

12

19. Eysa Salajegheh, “Optimum Design of Structures with High Quality Approximation of Frequency Constraints”, 3rd Asian Pacific Conference on Computational Mechanics, Seoul, South Korea, 16-18 September, 1996.

20. Eysa Salajegheh, “Discrete Optimization of Structures by Combining Branch and Bound and Multi Point Approximation”, 6th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Bellevue, Washington State, United States of America, 4-6 September, 1996.

21. Eysa Salajegheh, “Optimum Design of Steel Space Frames with Frequency Constraints Using Three Point Rayleigh Quotient Approximation”, International Conference on Advances in Steel Structures, Hong Kong, 11-14 December, 1996.

22. Eysa Salajegheh, “Structural Optimization Using Response Approximation and Optimality Criteria Methods”, 4th Annual Mechanical Engineering Conference of ISME and Second International Mechanical Engineering Conference, Shiraz University, Shiraz, Iran, 1996.

23. Eysa Salajegheh, “Optimum Shape Design of Three Dimensional Continuum Structures Using Second Order Approximation”, 4th International Conference on Civil Engineering, Sharif University of Technology, Tehran, Iran, 4-6 May, 1997.

24. Eysa Salajegheh, “Optimum Design of Structures with Frequency Constraints Using Second Order Rayleigh Quotient Approximation”, 2nd World Congress of Structural and Multidisciplinary Optimization, Zakopane, Poland, 26-30 May, 1997.

25. Eysa Salajegheh, “Optimum Design of Structures with High Quality Approximation of Frequency Constraints”, Rome, Italy, 8 - 10 September, 1997.

26. Eysa Salajegheh, “Optimum Design of Plate and Shell Structures with a Three Point Approximation”, International Symposium on Shell and Special Structures, Singapore, 10-11 November, 1997.

27. Eysa Salajegheh, Ali Rahmani, “Optimum Shape Design of Three Dimensional Continuum Structures Using Two Point Quadratic Approximation”, 4th International Conference on Computational Structures Technology and 1st International Conference on Engineering Computational Technology, Edinburgh, United Kingdom, 18-21 August, 1998.

28. Eysa Salajegheh, “Optimum Design of Structures with Frequency Response Constraints Using a Three Point Function Approximation”, 11th European Conference on Earthquake Engineering, France, 6-11 September, 1998.

29. Omid Sarmadi, Eysa Salajegheh, Aliakbar Maghsoudi, “P - Delta Analysis of Frame Structures”, 6th Annual Mechanical Engineering Conference of ISME and 3th International Mechanical Engineering Conference, Tehran, Iran, 1998.

30. Eysa Salajegheh, Ali Heidari, “Optimum Design of Structures against Earthquake”, Conference on Earthquake and Revenue of Educational Spaces, Shiraz, Iran, 1998.

13

31. Esmaeil Eslami, Eysa Salajegheh, Mohammadreza Shahiri, “Multiobjective Optimum Design of Structures by Fuzzy Approaches”, 28th Annual Iranian Mathematics Conference, Tehran, Iran, 1998.

32. Mohammadreza Shahiri, Ali Menhaj, Eysa Salajegheh, “Multiobjective Optimization by Fuzzy Approaches”, 28th Annual Iranian Mathematics Conference, Tehran, Iran, 1998.

33. Reza Siabi Shahrivar, Ali Menhaj, Eysa Salajegheh, “Optimum Design of Structures by Neural Network”, 28th Annual Iranian Mathematics Conference, Tehran, Iran, 1998.

34. Eysa Salajegheh, Aliakbar Maghsoudi, Mohammadreza Saeidipour, “Optimization of Concrete Structures”, 1st Optimization Conference and its Applications, Ferdowsi University of Mashhad, Mashhad, Iran, 1998.

35. Eysa Salajegheh, Ali Tavakkoli, “Optimum Design of Steel Structures”, 1st Optimization Conference and its Applications, Ferdowsi University of Mashhad, Mashhad, Iran, 1998.

36. Mohammadreza Shahiri, Eysa Salajegheh, Esmaeil Eslami, “Optimum Design of Structures Based on Reliability Theory Fuzzy Decision, 1st Optimization Conference and its Applications, Ferdowsi University of Mashhad, Mashhad, Iran, 1998.

37. Mohammadreza Shahiri, Eysa Salajegheh, Esmaeil Eslami, “Optimum Design of Structures with Fuzzy Parameters”, 1st Optimization Conference and its Applications, Ferdowsi University of Mashhad, Mashhad, Iran, 1998.

38. Reza Siabi Shahrivar, Eysa Salajegheh, Esmaeil Eslami, “Optimum Design of Indeterminate Structures by Neural Network”, 1st Optimization Conference and its Applications, Ferdowsi University of Mashhad, Mashhad, Iran, 1998.

39. Eysa Salajegheh, Mohammadreza Torkamani, “An Efficient Approximation Method for Optimum Design of Plate Structures with Frequency Constraints”, 1st Optimization Conference and its Applications, Ferdowsi University of Mashhad, Mashhad, Iran, 1998.

40. Eysa Salajegheh, Aliakbar Maghsoudi, Mohsen Heidary, “Optimization of Continuous Prestressed Beams”, 1st Optimization Conference and its Applications, Ferdowsi University of Mashhad, Mashhad, Iran, 1998.

41. Eysa Salajegheh, Omid Sheikholeslam, “Optimum Design of Plate Girders with Genetic Algorithm and Simulated Annealing” , 6th Annual Mechanical Engineering Conference and 3th International Mechanical Engineering Conference of the ISME, Tehran, Iran, 1998.

42. Eysa Salajegheh, Sattar Sheykhi, “Optimum Design of Structures with Frequency Constraints”, 2nd Conference on Earthquake Engineering and Structural Dynamics, Gilan University, Rasht, Iran, 1998.

14

43. Eysa Salajegheh, Ali Rahmani, “Optimum Design of Plate Structures with Stress and Deflection Constraints”, 6th Annual Mechanical Engineering Conference and 3th International Mechanical Engineering Conference of the ISME, Tehran, Iran, 1998.

44. Eysa Salajegheh, Mohammadreza Torkamani, “Optimum Design of Plate Structures with Frequency Constraints Using Two Point Approximation”, 7th International Conference on Civil and Structural Engineering Computing, Edinburgh, Scotland, 1999.

45. Eysa Salajegheh, Hamed Saffari, Behrouz Mianabadi, “Modification of the Effective Length Factor for Open Thin Cross Sections in the Laterally Restrained Frames”, 7th Annual Mechanical Engineering Conference of the ISME, Zahedan, Iran, 1999.

46. Eysa Salajegheh, Ali Heidari, “An Effective Approach for Structural Optimization against Dynamic Loads with Frequency Constraints”, 7th Annual Mechanical Engineering Conference of the ISME, Zahedan, Iran, 1999.

47. Eysa Salajegheh, Mohammadreza Torkamani, “An Approximation Method for Optimum Design of Plate Structures with Frequency Constraints”, 7th Annual Mechanical Engineering Conference of the ISME, Zahedan, Iran, 1999.

48. Eysa Salajegheh, Ali Heidari, “An Effective Approach for Optimum Design of Structures against Earthquake by Approximate Dynamic Analysis”, 3th International Conference on Seismology and Earthquake Engineering, Tehran, Iran, 1999.

49. Ali Heidari, Eysa Salajegheh, “Optimum Design of Structures with Harmonic Support Movements”, 1st Conference of Iranian Society of Civil Engineers, Tehran, Iran, 1999.

50. Eysa Salajegheh, Javad Salajegheh, “Advances in Structural Optimization”, 1st Conference of Iranian Society of Civil Engineers, Tehran, Iran, 1999.

51. Eysa Salajegheh, Mohammadreza Torkamani, “Optimum Design of Plate Structures with Frequency Constraints Using Two – Point Approximation”, 7th International Conference on Civil and Structural Engineering Computing and 5th International Conference on the Application of Artificial Intelligence to Civil and Structural Engineering, Oxford, United Kingdom, 13-15 September, 1999.

52. Eysa Salajegheh, Javad Salajegheh, “Optimum Design of Structures with Discrete Variables Using Approximation Concepts”, 5th International Conference on Computational Structures Technology and 2nd International Conference on Engineering Computational Technology, Leuven, Belgium, 6-8 September, 2000.

53. Eysa Salajegheh, Javad Salajegheh, “Continuous Discrete Optimization of Structures Using Approximation Methods, 5th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Long Beach, CA, United States of America, 2000.

54. Eysa Salajegheh, Gholamreza Sattarshaykhi, Ali Heidari, “Optimum Design of Structures with Frequency Constraints Using Second Order Approximation”, 5th

15

International Conference on Civil Engineering, Ferdowsi University of Mashhad, Mashhad, Iran, 2000.

55. Javad Salajegheh, Eysa Salajegheh, “Discrete Optimization of Space Structures by Penalty Functions and Approximate Analysis”, 5th International Conference on Civil Engineering, Ferdowsi University of Mashhad, Mashhad, Iran, 2000.

56. Eysa Salajegheh, Ali Tavakkoli, “Optimum Design of Steel Structures by Equivalent Static and Pseudo Dynamic Analysis Methods”, 5th International Conference on Civil Engineering, Ferdowsi University of Mashhad, Mashhad, Iran, 2000.

57. Eysa Salajegheh, Ali Heidari, “Optimum Design of Structures by Approximate Dynamic Analysis”, 5th International Conference on Civil Engineering, Ferdowsi University of Mashhad, Mashhad, Iran, 2000.

58. Mohammadreza Mohammadizadeh, Eysa Salajegheh, “Optimum Design of Steel Structures under Earthquake Loads by Penalty Functions with Discrete Variables”, 5th International Conference on Civil Engineering, Ferdowsi University of Mashhad, Mashhad, Iran, 2000.

59. Eysa Salajegheh, Mahdi Moridi, “Optimum Design of Double Layer Grids with Height and Area Variables”, 5th International Conference on Civil Engineering, Ferdowsi University of Mashhad, Mashhad, Iran, 2000.

60. Hosein Ebrahimi Farsangi, Eysa Salajegheh, “Topological Optimization of Double Layer Grids Using Genetic Algorithms”, 5th International Conference on Civil Engineering, Ferdowsi University of Mashhad, Mashhad, Iran, 2000.

61. Mohammadreza Mohammadizadeh, Eysa Salajegheh, “Optimum Design of Steel Structures by Penalty Functions with Discrete Variables”, 8th Annual Mechanical Engineering Conference of the ISME, Tehran, Iran, 2000.

62. Eysa Salajegheh, Javad Salajegheh, “Optimum Design of Space Structures”, 1st National Conference of Space Structures, Tehran, Iran, 2000.

63. Eysa Salajegheh, Javad Salajegheh, “Optimum Design of Structures with Discrete Variables Using a Hybrid Second and Third Order Approximation Methods”, 4th World Congress of Structural and Multidisciplinary Optimization, Dalian, China, 4-8 June, 2001.

64. Eysa Salajegheh, Mohammad Najjar, “Optimum Design of Structures with Semi - Rigid Joints against Earthquake”, 1st Iran-Italy Workshop: Earthquake Engineering: Seismic, Vulnerability of Civil Constructions, Tehran, Iran, 2001.

65. Eysa Salajegheh, Koroush Lotfi, “Optimum Design of Structures by Combination of Genetic Algorithm and Simulated Annealing Using Approximation Concepts”, 32th Annual Iranian Mathematics Conference, University of Gilan, Rasht, Iran, 2001.

16

66. Eysa Salajegheh, Abbas Iranmanesh, Hasan Pouresmaeil, “Optimum Design of Space Structures with Semi - Rigid Joints by Genetic Algorithm and Neural Networks”, 6th International and 10th Annual Mechanical Engineering Conference of the ISME, Khajeh Nasireddin Toosi University, Tehran, Iran, May, 2002.

67. Ali Heidari, Eysa Salajegheh, Saeid Saryazdi, “Optimization against Earthquake by Combining Genetic Algorithm and Simulated Annealing Using Wavelet Theory”, 6th International and 10th Annual Mechanical Engineering Conference of the ISME, Khajeh Nasireddin Toosi University, Tehran, Iran, May, 2002.

68. Eysa Salajegheh, Mohammad Najjar, “Optimum Design of Structures with Discrete Variables against Dynamic Loads”, 6th International and 10th Annual Mechanical Engineering Conference of the ISME, Khajeh Nasireddin Toosi University, Tehran, Iran, May, 2002.

69. Eysa Salajegheh, Mohammad Najjar, “Optimum Design of Structures with Semi - Rigid Joints against Dynamic Loads”, Columbia University, New York, United States of America, 2-5 June, 2002.

70. Eysa Salajegheh, Koroush Lotfi, “Optimum Design of Structures by Combining Genetic Algorithm and Simulated Annealing Using Response Surface Approximation”, 5th International Conference on Space Structures, Space Structures Research Centre, University of Surrey, Guildford, Surrey, United Kingdome, 19-21 August, 2002.

71. Eysa Salajegheh, Ali Heidari, “Optimum Design of Structures against Earthquake by an Adaptive Genetic Algorithm Using Wavelet Transform”, 9th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta, Georgia, United States of America, 4-6 September, 2002.

72. Eysa Salajegheh, Ali Heidari, “Optimum Design of Structures against Earthquake by Wavelet Transforms and Filter Banks”, 5th World Congress of Structural and Multidisciplinary Optimization, Italy, 19-23 May, 2003.

73. Mohammadreza Ghasemi, Eysa Salajegheh, Ahmad Ghorbani, “Optimum Design of Steel Frames with Frequency Constraints Using Wavelet Neural Networks”, 5th World Congress of Structural and Multidisciplinary Optimization, Italy, 19-23 May, 2003.

74. Eysa Salajegheh, Mohammad Najjar, “Optimum Design of Steel Structures against Earthquake with Semi - Rigid Joints”, 6th International Conference on Civil Engineering, Isfahan University of Technology, Isfahan, Iran, 5 May, 2003.

75. Eysa Salajegheh, Alireza Lavaee, “Optimum Design of Space Structures by Wavelet Theory”, 6th International Conference on Civil Engineering, Isfahan University of Technology, Isfahan, Iran, 5 May, 2003.

76. Eysa Salajegheh, Peyman Torkzadeh Mahani, “Optimum Design of Tall Steel Tube Buildings”, 6th International Conference on Civil Engineering, Isfahan University of Technology, Isfahan, Iran, 5 May, 2003.

17

77. Eysa Salajegheh, Abbas Iranmanesh, Mohammad Arabnezhad, “Study of Rigid and Semi - Rigid Joints”, 6th International Conference on Civil Engineering, Isfahan University of Technology, Isfahan, Iran, 5 May, 2003.

78. Hasan Pouresmaeil, Eysa Salajegheh, “Optimum Design of Space Structures with Semi - Rigid Joints by Nonlinear Analysis and Genetic Algorithm”, 6th International Conference on Civil Engineering, Isfahan University of Technology, Isfahan, Iran, 5 May, 2003.

79. Ali Heidari, Eysa Salajegheh, “Optimum Design of Tall Buildings Using Approximation Dynamic Analysis and Genetic Algorithm”, 6th International Conference on Civil Engineering, Isfahan University of Technology, Isfahan, Iran, 5 May, 2003.

80. Ali Heidari, Eysa Salajegheh, “Approximation Structural Analysis Subjected to Earthquake Using Wavelet Theory”, 6th International Conference on Civil Engineering, Isfahan University of Technology, Isfahan, Iran, 5 May, 2003.

81. Eysa Salajegheh, Javad Salajegheh, Reza Yazdani, “Optimum Design of Offshores Using Annealing Method Subjected to Dynamic Analysis and Using Approximation Methods”, 6th International Conference on Civil Engineering, Isfahan University of Technology, Isfahan, Iran, 5 May, 2003.

82. Eysa Salajegheh, Alireza Lavaee, “Optimization of Space Structures Using Wavelet Theory”, 6th International Conference on Civil Engineering, Isfahan University of Technology, Isfahan, Iran, 5 May, 2003.

83. Eysa Salajegheh, Saeid Gholizadeh Ghaleaziz, “Optimum Design of Space Structures Using Modified Genetic Algorithm and RBF – CP”, 6th International Conference on Civil Engineering, Isfahan University of Technology, Isfahan, Iran, 5 May, 2003.

84. Ali Heidari, Eysa Salajegheh, “Dynamic Analysis of Structures against Earthquake by an Adaptive Wavelet”, 4th International Conference on Seismology and Earthquake Engineering, International Institute of Earthquake Engineering and Seismology, Tehran, Iran, 12-15 May, 2003.

85. Eysa Salajegheh, Ali Heidari, “Optimum Design of Structures against Earthquake by a Modified Genetic Algorithm Using Wavelet Networks”, 4th International Conference on Seismology and Earthquake Engineering, International Institute of Earthquake Engineering and Seismology, Tehran, Iran, 12-15 May, 2003.

86. Eysa Salajegheh, Javad Salajegheh, Reza Yazdani, “Optimum Design of the Footing of Fixed Marine Platform Using Metal Annealing Method and Approximation Analysis Subjected to Step by step Dynamic Loads”, 4th International Conference on Seismology and Earthquake Engineering, International Institute of Earthquake Engineering and Seismology, Tehran, Iran, 12-15 May, 2003.

87. Eysa Salajegheh, Saeid Gholizadeh Ghaleaziz, “Optimum Design of Structures by an Improved Genetic Algorithm Using Neural Networks”, 9th International Conference on Civil and Structural Engineering Computing and 7th International Conference on

18

the Application of Artificial Intelligence to Civil and Structural Engineering, Egmond aan Zee, The Netherlands, 2-4 September, 2003.

88. Eysa Salajegheh, Mahdi Nobahari, “Optimization the Mutation Operator in Genetic Algorithm”, 5th International Conference on Intelligente Systems, Ferdowsi University of Mashhad, Mashhad, Iran, 14-16 October, 2003.

89. Eysa Salajegheh, Mostafa Mashayekhi, “Application of Genetic Algorithm in Topology Optimization and Determinatin the Optimal Location of Columns in Space Structures”, 5th International Conference on Intelligente Systems, Ferdowsi University of Mashhad, Mashhad, Iran, 14-16 October, 2003.

90. Hasan Pouresmaeil, Javad Vaseghiamiri, Eysa Salajegheh, “Dome Optimization of Space Structures Using Genetic Algorithm and Neural Networks”, 5th Pervasive Conference on Intelligente Systems, Ferdowsi University of Mashhad, Mashhad, Iran, 14-16 October, 2003.

91. Eysa Salajegheh, Ali Heidari, “Optimum Design of Structures against Earthquake by Discrete Wavelet Neural Network”, 7th International Conference on Computational Structures Technology and 4th International Conference on Engineering Computational Technology, Lisbon, Portugal, 7-9 September, 2004.

92. Eysa Salajegheh, Ali Heidari, “Approximate Dynamic Analysis of Structures against Earthquake by Discrete Wavelet Neural Network”, 3th International Conference on Civil Engineering International Conference on Advances in Structural Engineering and Mechanics, Seoul, South Korea, 2004.

93. Eysa Salajegheh, Saeid Gholizadeh Ghaleaziz, “Estimation of Structural Responses against Earthquake Using Radial Basis Function and GR Neural Networks”, 1st National Congress on Civil Engineering, Sharif University of Technology, Tehran, Iran, 13-16 May, 2004.

94. Eysa Salajegheh, Saeid Gholizadeh Ghaleaziz, “Comparison Radial Basis Function with Wavelet Network in Structural Analysis of Transfer Power Tower”, 1st National Congress on Civil Engineering, Sharif University of Technology, Tehran, Iran, 13-16 May, 2004.

95. Eysa Salajegheh, Saeid Gholizadeh Ghaleaziz, Alireza LavaeE, “Estimation of the Maximum Response of Shear Structures Subjected to Earthquake Loads Using Radial Basis Function and GR”, 1st National Congress on Civil Engineering, Sharif University of Technology, Tehran, Iran, 13-16 May, 2004.

96. Eysa Salajegheh, Mohammad Khajehzadeh, “Optimum Design of Frame Structures against Earthquake Using Wavelet Neural Network”, National Conference on Earthquake, Shahid Bahonar University of Kerman, Kerman, Iran, 2004.

97. Eysa Salajegheh, Ehsan Araghizadeh, “Evaluation of Response Factor of Double Layer Space Structures”, National Conference on earthquake, Shahid Bahonar University of Kerman, Kerman, Iran, 2004.

19

98. Mohammadreza Ghasemi, Eysa Salajegheh, Ahmad Mohammadzadeh, “Application the Wavelet Transform in Processing the Earthquake Waves”, 11th Students Conference on Civil Engineering, University of Hormozgan, Bandar Abbas, Iran, 20-24 December, 2004.

99. Eysa Salajegheh, Mohsen Khatibinia, “Optimization the Location of Columns in Domes Using Genetic Algorithm”, 6th Pervasive Conference on Intelligenet Systems, Shahid Bahonar University of Kerman, Kerman, Iran, 25-26 December, 2004.

100. Eysa Salajegheh, Mahdi Kaykha, “Topology Optimization of Double Layer Grids Using Genetic Algorithm”, 6th Pervasive Conference on Intelligenet Systems, Shahid Bahonar University of Kerman, Kerman, Iran, 25-26 December, 2004.

101. Eysa Salajegheh, Saeid Gholizadeh Ghaleaziz, “Time - History Analysis of Structures against Earthquake Using Neural Networks”, International Conference on Earthquake (A Memorial of Bam Disaster), Shahid Bahonar University of Kerman, Kerman, Iran, 28-30 December, 2004.

102. Asadollah Esfahani, Mohammadjavad Fadaee, Eysa Salajegheh, “Optimization the Concrete Breakwater Using Wavelet Theory for Approximataion Dynamic Loads”, 2nd International Conference on Concrete and Development, Tehran, 30 April, 2005.

103. Javad Salajegheh, Eysa Salajegheh, Seyyedmohammad Seyyedpour, “Optimum Design of Socket Joint Systems for Space Structures Using Second Order Approximation”, 8th International Conference on the Application of Artificial Intelligence to Civil, Structural and Environmental Engineering and 10th International conference on Civil, Structural and Environmental Engineering Computing, Rome, Italy, 30 August - 2 September, 2005.

104. Eysa Salajegheh, Mostafa Mashayekhi, Mahdi Kaykha, Mohsen Khatibinia, “Optimum Shape Design of Space Structures Using Genetic Algorithms”, 8th International Conference on the Application of Artificial Intelligence to Civil, Structural and Environmental Engineering and 10th International conference on Civil, Structural and Environmental Engineering Computing, Rome, Italy, 30 August - 2 September, 2005.

105. Peyman Torkzadeh Mahani, Eysa Salajegheh, Javad Salajegheh, “Optimum Design of Three Dimensional Steel Frames Structures Using New Approximation Methods”, 2nd Thin – Walled Structures Conference, Shahid Bahonar University of Kerman, Kerman, Iran, 16-17 November, 2005.

106. Peyman Torkzadeh Mahani, Eysa Salajegheh, Javad Salajegheh, “Optimum Design of Steel Frames Structures with Determination the Best Arrangement of Columns”, 2nd Thin – Walled Structures Conference, Shahid Bahonar University of Kerman, Kerman, Iran, 16-17 November, 2005.

107. Eysa Salajegheh, Javad Salajegheh, Seyyedmohammad Seyyedpour, Saeid Gholizadeh Ghaleaziz, “Approximation of Natural Frequencies of Concrete Arch Dams

20

Using Radial Basis Function and BP”, 2nd Thin – Walled Structures Conference, Shahid Bahonar University of Kerman, Kerman, Iran, 16-17 November, 2005.

108. Eysa Salajegheh, Javad Salajegheh, Saeid Gholizadeh Ghaleaziz Seyyedmohammad Seyyedpour, “Approximation of Ultimate Load in NS Joints of Space Structures Using Wavelet Neural Networks”, 2nd Thin – Walled Structures Conference, Shahid Bahonar University of Kerman, Kerman, Iran, 16-17 November, 2005.

109. Eysa Salajegheh, Mohsen Sadeghi Sabzevari, Ahad Farbood, “Nonlinear Analysis of Structures Using Capacity Spectrum and Neural Networks”, 2nd Thin – Walled Structures Conference, Shahid Bahonar University of Kerman, Kerman, Iran, 16-17 November, 2005.

110. Eysa Salajegheh, Ali Heidari, Mohammadamir Sherafati Arshad, “Comparison Fast Wavelet Transform with Fast Fourier Transform in One Degree od Freedom Structures”, 1st Conference of Earthquake in Doroud, Islamic Azad University of Doroud, Douroud, Iran, 24 November, 2005.

111. Eysa Salajegheh, Ahad Farbood, Mohsen Sadeghi Sabzevari, “Effect of Using the Performance – Based Design in Reduction of Damages due to Earhquake”, 1st International Conference on Integrated Natural Disaster Management, Tehran, 13-14 February, 2006.

112. Eysa Salajegheh, Saeid Gholizadeh Ghaleaziz, “Comparison of Radial Basis Function, GR and BP with Wavelet Back Propagation Neural Networks in Approximation Dynamic Analysis of Structures”, 7th International Congress on Civil Engineering, Tarbiat Modarres University, Tehran, Iran, May 8-10, 2006.

113. Eysa Salajegheh, Javad Vaseghi Amiri, Hasan Pouresmaeil, “Optimization of Space Structures with Considering Semi – Rigid Connections Using Genetic Algorithm and Neural Networks”, 7th International Congress on Civil Engineering, Tarbiat Modares University, Tehran, Iran, 8-10 May, 2006.

114. Eysa Salajegheh, Saeid Gholizadeh Ghaleaziz, “Design of a News Neural Network for Applicatation in Engineering Problems”, 7th International Congress on Civil Engineering, Tarbiat Modares University, Tehran, Iran, 8-10 May, 2006.

115. Eysa Salajegheh , Ahad Farbood, Mohsen Sadeghi Sabzevari, “Effect of Using the Real Earthquake Spectrum on Result of Nonlinear Incremental Static Analysis” , 7th International Congress on Civil Engineering, Tarbiat Modares University, Tehran, Iran, 8-10 May, 2006.

116. Eysa Salajegheh, Javad Salajegheh, Saeid Gholizadeh Ghaleaziz, “Structural Optimization for Earthquake Loading Using Neural Networks and Genetic Algorithm”, 8th International Conference on Computational Structures Technology and 5th International Conference on Engineering Computational Technology, Las Palmas de Gran Canaria, Spain, 12-15 September, 2006.

21

117. Javad Salajegheh, Eysa Salajegheh, Saeid Gholizadeh Ghaleaziz, Seyyedmohammad Seyyedpour, “Optimum Design of Arch Dams with Frequency Constraints Using Wavelet Neural Networks”, 8th International Conference on Computational Structures Technology and 5th International Conference on Engineering Computational Technology, Las Palmas de Gran Canaria, Spain, 12-15 September, 2006.

118. Saeid Gholizadeh Ghaleaziz, Eysa Salajegheh, “An Intelligent Neural System for Predicting Structural Responses Subjected to Earthquakes”, 8th International Conference on Computational Structures Technology and 5th International Conference on Engineering Computational Technology, Las Palmas de Gran Canaria, Spain, 12-15 September, 2006.

119. Ahad Farbood, Mohsen Sadeghi Sabzevari, Eysa Salajegheh, “Comparison the amount of Damages due to Earthquake in Steel Frames Using Performance – Based Design Methods”, 2nd International Conference on Integrated Natural Disaster Management, Tehran, Iran, 13-14 February, 2007.

120. Eysa Salajegheh, Saeid Ghaderi Sohi, Afshin Mohammadi, “Optimizationd of Space Structures Using Cellular Automata Paradigm”, 3rd National Congress on Civil Engineering, University of Tabriz, Tabriz, Iran, 1-3 May, 2007.

121. Eysa Salajegheh, Ali Heidari, Mohammadamir Sherafati Arshad, “Dynamic Analysis of Space Structures Using Fast Wavelet Transform”, 3rd National Congress on Civil Engineering, University of Tabriz, Tabriz, Iran, 1-3 May, 2007.

122. Ali Heidari, Eysa Salajegheh, Alireza Esmaeilzadeh, “Calculation the Eigenvalues of Plates Using Radial Wave Neural Network”, 3rd National Congress on Civil Engineering, University of Tabriz, Tabriz, Iran, 1-3 May, 2007.

123. Eysa Salajegheh, Saeid Ghaderi Sohi, Afshin Mohammadi, “A New Method for Dynamic Analysis of Structures Using Cellular Automata”, 5th International Conference on Seismology and Earthquake Engineering, International Institute of Earthquake Engineering and Seismology, Tehran, Iran, 13-16 May, 2007.

124. Eysa Salajegheh, Afshin Mohammadi, Saeid Ghaderi Sohi, “Optimum Automated Performance - Based Design of Concentric Steel Braced Frames”, 5th International Conference on Seismology and Earthquake Engineering, International Institute of Earthquake Engineering and Seismology, Tehran, Iran, 13-16 May, 2007.

125. Ali Heidari, Eysa Salajegheh, Alireza Esmaeilzadeh, “Approximation Dynamic Analysis Using Neural Networks”, 5th International Conference on Seismology and Earthquake Engineering, International Institute of Earthquake Engineering and Seismology, Tehran, Iran, 13-16 May, 2007.

126. Mohammad Khajehzadeh, Eysa Salajegheh, “Comparision the Optimization of Structural Frames Subjected to Earthquake Using Wavelet Neural Network and Mathematical Models”, 5th International Conference on Seismology and Earthquake

22

Engineering, International Institute of Earthquake Engineering and Seismology, Tehran, Iran, 13-16 May, 2007.

127. Eysa Salajegheh, Mahdi Rashidi, “Monitoring the Performance of X – Bracing Systems with 264th Code of the Planning and Management Organization of Iran and Old Code of Iran”, 5th International Conference on Seismology and Earthquake Engineering, International Institute of Earthquake Engineering and Seismology, Tehran, Iran, 13-16 May, 2007.

128. Eysa Salajegheh, Saeid Gholizadeh Ghaleaziz, Omidali Samavati, “Optimal Design of Structures Subjected to Earthquake Using Artificial Intelligence and Wavelet Transforms”, 7th World Congresses of Structural and Multidisciplinary Optimization, COEX Seoul, South Korea, 21-25 May, 2007.

129. Javad Salajegheh, Eysa Salajegheh, Saeid Gholizadeh Ghaleaziz, Seyyedmohammad Seyyedpour, “Optimum Shape Design of Arch Dams Subjected to Response Spectrum Loading Using Artificial Intelligence Methods”, 7th World Congresses of Structural and Multidisciplinary Optimization, COEX Seoul, South Korea, 21-25 May, 2007.

130. Eysa Salajegheh, Omidali Samavati, “Dynamic Analysis of Space Structures Using Wavelet”, 2nd National Conference on Space Structures, Sahand University of Technology, Tabriz, Iran, 22-23 May, 2007.

131. Eysa Salajegheh, “Optimum Design of Structures against Earthquake”, 2nd National Conference on Space Structures, Sahand University of Technology, Tabriz, Iran, 22-23 May, 2007.

132. Eysa Salajegheh, Mansour Ghalenoyi, Mahmoud Layeghrafat, “Estimation the Seismic Parameters of Single – Layered Grids”, 2nd National Conference on Space Structures, University of Tehran, Tehran, 22-23 May, 2007.

133. Fardin Azhdari, Amin Ghorbani, Eysa Salajegheh, “Assessment of Behavior Factor in Double – Layer Grids under Vertical Load”, 2nd National Conference on Space Structures, University of Tehran, Tehran, 22-23 May, 2007.

134. Eysa Salajegheh, Amin Ghorbani, Fardin Azhdari, “Approximate Determination the Primary Vertical Peroid Time of Double – Layer Space Structures”, 2nd National Conference on Space Structures, University of Tehran, Tehran, 22-23 May, 2007.

135. Amin Ghorbani, Fardin Azhdari, Eysa Salajegheh, “Determination the Behavior Factor of Single – Layer Barrel Vaults Subjected to Vertical Load”, 2nd National Conference on Space Structures, University of Tehran, Tehran, 22-23 May, 2007.

136. Reza Kamali Salehabad, Eysa Salajegheh, Mohammadhosein Bagheripour, “Preparation the Vertical Reflection Spectrum and it’s Application in Space Structures”, 2nd National Conference on Space Structures, University of Tehran, Tehran, 22-23 May, 2007.

23

137. Eysa Salajegheh, Alireza Rasekhi, Seyyedmohammad Seyyedpour, “Optimum Design of Akamfelez Joints in Space Structures”, 2nd National Conference on Space Structures, University of Tehran, 22-23 May, 2007.

138. Eysa Salajegheh, Saeid Gholizadeh Ghaleaziz, ‘Optimization of Structures for Earthquake Loads by a Self - Organizing Neural System”, 11th International Conference on Civil, Structural and Environmental Engineering Computing and 9th International Conference on the Application of Artificial Intelligence to Civil, Structural and Environmental Engineering, St. Julians, Malta, 18-21 September, 2007.

139. Javad Salajegheh, Eysa Salajegheh, Seyyedmohammad Seyyedpour, Saeid Gholizadeh Ghaleaziz, “Optimum Design of Arch Dams Using a Combination of Simultaneous Perturbation Stochastic Approximation and Genetic Algorithms”, 11th International Conference on Civil, Structural and Environmental Engineering Computing and 9th International Conference on the Application of Artificial Intelligence to Civil, Structural and Environmental Engineering, St. Julians, Malta, 18-21 September, 2007.

140. Afshin Salajegheh, Eysa Salajegheh, “Dynamic Behavior of Double – Layered Domes Under Horizontal and Vertical Components of Earthquake”, 2nd National Conference on Retrofitting of Iran, Islamic Azad University of Kerman, Kerman, Iran, 24-25 December, 2007.

141. Hooman Habib Agahi, Eysa Salajegheh, “Bending Joint of Beam to Column in RCS”, 2nd National Conference on Retrofitting of Iran, Islamic Azad University of Kerman, Kerman, Iran, 24-25 December, 2007.

142. Eysa Salajegheh, Javad Salajegheh, Roya Amiri, Afshin Mohammadi, “Assessment of the Precision of Modal Pushover Analysis in Estimating Seismic Response of Bending Concrete Frames with Shear walls”, 2nd National Conference on Retrofitting of Iran, Islamic Azad University of Kerman, Kerman, Iran, 24-25 December, 2007.

143. Javad Salajegheh, Eysa Salajegheh, Seyyedmohammad Seyyedpour, Saeid Gholizadeh Ghalaeaziz, “Optimum Design of Arch Dams Including Hydrodynamic Effects for Earthquake Loading Using the Simultaneous Perturbation Stochastic Approximation Method”, 9th International Conference on Computational Structures Technology and 6th International Conference on Engineering Computational Technology, Athens, Greece, 2-5 September, 2008.

144. Eysa Salajegheh, Hooman Habib Agahi, “Performance Optimization of RCS Using Ant Colony Optimization Algorithm”, 4th National Congress on Civil Engineering, University of Tehran, Tehran, Iran, 6-8 May, 2008.

145. Eysa Salajegheh, Afshin Mohammadi, Saeid Ghaderi Sohi, “Assessment of the Performance of Scaling Seismograms in Nonlinear Analysis”, 4th National Congress on Civil Engineering, University of Tehran, Tehran, Iran, 6-8 May, 2008.

24

146. Mohsen Khatibinia, Eysa Salajegheh, Saeid Gholizadeh Ghaleaziz, “Optimization of Structures Using Modified Particle Swarm Optimization Algorithm”, 4th National Congress on Civil Engineering, University of Tehran, Tehran, Iran, 6-8 May, 2008.

147. Reza Kamali Salehabad, Eysa Salajegheh, “Calculation and Plot of the Vertical Reflection Spectrum”, 4th National Congress on Civil Engineering, University of Tehran, Tehran, Iran, 6-8 May, 2008.

148. Eysa Salajegheh, Hooman Habib Agahi, “Performance Based Design of Reinforced Concrete Frames”, 14th World Conference on Earthquake Engineering, Beijing, China, 12-17 October, 2008.

149. Eysa Salajegheh, Saeid Ghaderi Sohi, Afshin Mohammadi, “Nonlinear Dynamic Analysis of Structures Using Cellular Automata”, 14th World Conference on Earthquake Engineering, Beijing, China, 12-17 October, 2008.

150. Javad Salajegheh, Eysa Salajegheh, Seyyedmohammad Seyyedpour, Saeid Gholizadeh Ghaleaziz, “Arch Dam Optimization Considering Fluid - Structure Interaction with Frequency Constraints Using Artificial Intelligent Methods”, 14th World Conference on Earthquake Engineering, Beijing, China, 12-17 October, 2008.

151. Eysa Salajegheh, Afshin Mohammadi, Saeid Ghaderi Sohi, “Optimum Performance Based Design of Concentric Steel Braced Frames”, 14th World Conference on Earthquake Engineering, Beijing, China, 12-17 October, 2008.

152. Nima Farhadi, Eysa Salajegheh, Mohsen Khatibinia, “Optimal Pile Arrangement in Piled Two Strip Foundation According to Structural Performance Level”, 8th International Congress on Civil Engineering, University of Shiraz, Shiraz, Iran, 11-13 May, 2009.

153. Iman Mnasouri, Eysa Salajegheh, Roya Dideban, “Seismic Reliability of Double Layer Grid Space Structures”, 8th International Congress on Civil Engineering, University of Shiraz, Shiraz, Iran, 11-13 May, 2009.

154. Eysa Salajegheh, Saeid Gholizadeh Ghaleaziz, “Metamodeling Based Structural Optimization for Earthquake Loading”, 1st International Conference on Soft Computing Technology in Civil, Structural and Environmental Engineering, Funchal, Maderia, Potugal, 1-4 September, 2009.

155. Eysa Saljegheh, Mahmoud Hoseini, Arash Sharafiyan Ardakani, “Analysis of Buried Sewer Pipes Seismic Vulnerability Using OpenSees”, 3rd National Conferernce on Operation and Maintenance of Water and Waste Water Systems, Power and Water University of Technology, Tehran, Iran, 23-24 February, 2010.

156. Javad Salajegheh, Eysa Salajegheh, Ehsan Oveysi, “Optimization of Buttress Dam’s Buttress via Approximation Concepts”, 2nd National Congress on Dam Construction, Islamic Azad University of Zanjan, Zanjan, 1 March, 2010.

25

157. Eysa Salajegheh, Saeid Seyfoori, Afshin Mohammadi, “Investigation of Seismic Retrofitting of Brick Jack Arch Slabs in Unreinforced Masonry Buildings”, International Conference on Lightweight Construction and Earthquake, The Iranian Academic Center for Education Culture and Research, Kerman Branch, Kerman, Iran, 21-22 April, 2010.

158. Sina Jabbarzadeh, Peyman Torkzadeh Mahani, Eysa Salajegheh, Saeid Gholizadeh Ghaleaziz, “Topology Optimization of Trusses Using Genetic Algorithm”, International Conference on Lightweight Construction and Earthquake, The Iranian Academic Center for Education Culture and Research, Kerman Branch, Kerman, Iran, 21-22 April, 2010.

159. Mohsen Jashnesedeh, Javad Salajegheh, Eysa Salajegheh, “Topology Optimization of Double – Layer Barrel Vaults against Dynamic Loads Using Genetic Algorithm”, International Conference on Lightweight Construction and Earthquake, The Iranian Academic Center for Education Culture and Research, Kerman Branch, Kerman, Iran, 21-22 April, 2010.

160. Ahmad Amiri, Eysa Salajegheh, Ahmad Heidari, “Optimum Design of Steel Frames against Time History Dynamic Analysis Using Particle Swarm Optimization Algorithm with Various Penalty Functions”, International Conference on Lightweight Construction and Earthquake, The Iranian Academic Center for Education Culture and Research, Kerman Branch, Kerman, Iran, 21-22 April, 2010.

161. Sajjad Gharebaghi, Eysa Salajegheh, Mohsen Khatibinia, Saeid Shojaei Bagheyni, “Optimization of Seismic Design of Two Dimensional Reinforced Concrete Bending Frames with Considering Damage Index”, International Conference on Lightweight Construction and Earthquake, The Iranian Academic Center for Education Culture and Research, Kerman Branch, Kerman, Iran, 21-22 April, 2010.

162. Mohsen Khatibinia, Eysa Salajegheh, “Structural Systems of Tall Buildings”, International Conference on Lightweight Construction and Earthquake, The Iranian Academic Center for Education Culture and Research, Kerman Branch, Kerman, Iran, 21-22 April, 2010.

163. Mohammadhadi Bagherinezhad, Javad Salajegheh, Eysa Salajegheh, “Evaluation the Frequency of Dominant Modes in Double – Layer Space Structures and Predictiction the Frequencies Using Fuzzy Logic, Genetic Algorithm Programming Method”, 6th International Conference on Seismology and Earthquake Engineering, International Institute of Earhquake Engineering and Seismology, Tehran, 16-18 May, 2010.

164. Mojtaba Khamseh, Peyman Tokzadehmahani, Eysa Salajegheh, “Determination the Damaged Locations of Structures Using Damage Indexes with Considering FRB Data”, 6th International Conference on Seismology and Earthquake Engineering, International Institute of Earhquake Engineering and Seismology, Tehran, 16-18 May, 2010.

26

165. Younes Goodarzi, Peyman Torkzadeh Mahani, Eysa Salajegheh, “Application the Flexibility Matrix in Determining the Location of Damages in Structures Using Modal Strain Energy”, 6th International Conference on Seismology and Earthquake Engineering, International Institute of Earhquake Engineering and Seismology, Tehran, Iran, 16-18 May, 2010.

166. Eysa Salajegheh, Iman Mansouri, “Seismic Reliability of Double – Layer Grid Space Structures”, 10th International Conference on Computational Structures Technology and 7th International Conference on Engineering Computational Technology, Valencia, Spain, 14-17 September, 2010.

167. Javad Salajegheh, Eysa Salajegheh, Mohammadjavad Fadaee, Mohsen Khatibinia, “Seismic Reliability of Reinforced Concrete Structures Including Soil - Structure Interaction”, 10th International Conference on Computational Structures Technology and 7th International Conference on Engineering Computational Technology, Valencia, Spain, 14-17 September, 2010.

168. Mohammadjavad Fadaee, Eysa Salajegheh, Javad Salajegheh, Mostafa Mashayekhi, “Reliability – Based Topology Optimization of Space Structures Using Ant Colony Optimization”, 10th International Conference on Computational Structures Technology and 7th International Conference on Engineering Computational Technology, Valencia, Spain, 14-17 September, 2010.

169. Saeid Gholizadeh Ghaleaziz, Eysa Slajegheh, “A Cellular Genetic Algorithm for Structural Optimization”, 10th International Conference on Computational Structures Technology and 7th International Conference on Engineering Computational Technology, Valencia, Spain, 14-17 September, 2010.

170. Vahid Chegini, Javad Salajegheh, Eysa Salajegheh, “Determination the Performance Level of Fiber Reinforced Polymer Concrete Using Analytical Finite Element Modelization”, 3rd International Conference on Seismic Retrofitting, Iranian National Retrofitting Center,Tabriz, Iran, 20-22 October, 2010.

171. Shahin Amini, Omid Tayyari, Eysa Salajegheh, “Study of Stress and Pore Pressure Behavior of Ardak Dam During Construction by Using Instrumentation Data and Comparing the Results with Analysis Amounts”, 1st National Conference on Stracture, Earthquake and Geotechnics, Higher Education Institute of Pardisan, Babolsar, Iran, 3 December, 2010.

172. Eysa Salajegheh, Zahra Fakkor Bafandeh, “Consideration the Effect of Confining the Joints of Reinforced Concrete Structures with Fiber Reinforced Polymer”, 1st National Conference on Stracture, Earthquake and Geotechnics, Higher Education Institute of Pardisan, Babolsar, Iran, 3 December, 2010.

173. Ahmad Amiri, Eysa Salajegheh, “Constrained Optimization of Three Dimensional Steel Frames against Earthquake Using Particle Swarm Optimization Algorithm with a Modified Penalty Function”, 1st National Conference on Stracture, Earthquake and Geotechnics, Higher Education Institute of Pardisan, Babolsar, Iran, 3 December, 2010.

27

174. Bagher Mohammadi, Eysa Salajegheh, “Application the Cellular Automata Theory in Dynamic Analysis of Structures”, 1st National Conference on Stracture, Earthquake and Geotechnics, Higher Education Institute of Pardisan, Babolsar, Iran, 3 December, 2010.

175. Mohammadhadi Bagherinezhad, Javad Salajegheh, Eysa Salajegheh, “Investigation the Frequency of Dominant Modes in Double Layer Grids against Vertical Load and Prediction the Frequencies Using Fuzzy Logic” , 1st National Conference on Stracture, Earthquake and Geotechnics, Higher Education Institute of Pardisan, Babolsar, Iran, 3 December, 2010.

176. Eysa Salajegheh, Mohammadjavad Fadaee, Javad Salajegheh, Mostafa Mashayekhi, Mohsen Khatibinia, “Topology Optimization of Double Layer Grids for Earthquake Loads Using Ant Colony Optimization” , 9th World Congress on Structural and Multidisciplinary Optimization, Shizuoka, Japan, 13-17 June, 2011.

177. Mohammad Ghanbari Vandi, Gholamabbas Barani, Eysa Salajegheh, “Optimization the Weight of Platforms Using Particle Swarm Optimization”, 2nd National Conference on Utilization Integrated Managment of Water Resources, Shahid Bahonar University of Kerman, Kerman, Iran, 29-30 January, 2011.

178. Seyyedmahdi Sajjadi, Masoudreza Hesami Kermani, Eysa Salajegheh, “Dynamic Analysis of Concrete Gravity Dams Using Artificial Neural Networks”, 2nd National Conference on Utilization Integrated Managment of Water Resources, Shahid Bahonar University of Kerman, Kerman, Iran, 29-30 January, 2011.

179. Akram Mokhtari, Gholamabbas Barani, Eysa Salajegheh, “Investigation the Multi – Phases Models in Simulation of Overflow over Circular Crest”, 3rd Irrigation and Drainage Network Management National Conference, Shahid Chamran University of Ahvaz, Ahvaz, Iran, 20-21 February, 2011.

180. Akram Mokhtari, Gholamabbas Barani, Eysa Salajegheh, “Investigation the Multi – Phases Models in Simulation of Overflow over Circular Crest”, National Conference on Mechanical Engineering, Islamic Azad University of East Tehran, Tehran, Iran, 3 March, 2011.

181. Ahmad Amiri, Eysa Salajegheh, “Comparison the Results of Optimum Design of Steel Frames Using Time History Analysis, Spectral Analysis and Equivalent Static Analysis”, 6th National Congress on Civil Engineering, University of Semnan, Semnan, Iran, 26-28 April, 2011.

182. Yousef Askari Dolatabad, Hesam Yazdani, Majid Yousefi, Eysa Salajegheh, “Optimization the Micropiled – Raft Foundations Using Ant Colony Optimization Algorithm and with Considering the Interaction Effects between Soil, Micropiles and Mat Foundation” , 6th National Congress on Civil Engineering, University of Semnan, Semnan, Iran, 26-28 April, 2011.

183. Seyyedmahdi Sajjadi, Eysa Salajegheh, Masoudreza Hesami kermani, “Shape Optimization of Cross Sections in Gravity Concrete Dams by Dynamic Analysis Using

28

Neural Networks”, 6th National Congress on Civil Engineering, University of Semnan, Semnan, Iran, 26-28 April, 2011.

184. Sajjad Gharehbaghi, Eysa Salajegheh, “Optimization the Distribution of Hysteresis Energy in Reinforced Concrete Structures”, 6th National Congress on Civil Engineering, University of Semnan, Semnan, Iran, 26-28 April, 2011.

185. Vahid Chegini, Javad Salajeghe, Eysa Salajegheh, “Obtain the Acceptance Criterion of Fiber Reinforced Polymer Concrete Beams Using Numerical Finite Element Modeling”, 6th National Congress on Civil Engineering, University of Semnan, Semnan, Iran, 26-28 April, 2011.

186. Eysa Salajegheh, Javad Salajegheh, Mohammadjavad Fadaee, Mostafa Mashayekhi, Mohsen Khatibinia, “Optimum Design of Double Layer Grids with Reliability and Frequency Constraints”, 3rd National Conference on Spatial Structures, Tehran, Iran, 17-18 May, 2011.

187. Mohammad Ghanbari Vandi, Eysa Salajegheh, Gholamabbas Barani, “Optimization the Space Trusses Using Gravitational Search Algorithm”, 3rd National Conference on Space Structures, University of Tehran, Tehran, Iran, 17-18 May, 2011.

188. Sajjad Gharehbaghi, Eysa Salajegheh, Mohsen Khatibinia, “Optimization of Reinforced Concrete Moment Resistant Frames based on Uniform Hysteretic Energy Distribution”, 1st International Conference on Urban Construction in the Vicinity of Active Faults, Tabriz Municipality, Tabriz, Iran, 3-5 September, 2011.

189. Sajjad Gharebaghi, Eysa Salajegheh, “Presentation an Effective Method for Determining the Ultimate Curvature Capacity of Reinforced Concrete Sections”, 3rd National Conference of Concrete, Iranian Concrete Institute, Tehran, Iran, 9 October, 2011.

190. Reza Kamyab Moghaddas, Eysa Salajegheh, “Optimization of Scallop Domes by Genetic Algorithm”, Conference on Earthquake, Structure and Computational Methods, The Iranian Academic Center for Education Culture and Research, Kerman Branch, Kerman, Iran, 18-19 October, 2011.

191. Reza Zare, Seyyedsadegh Naseralavi, Eysa Salajegheh, Peyman Tokzadeh Mahani, Javad Salajegheh, “Assessment of the Various Responses in Structural Damage Detection in Sensitivity – Based analysis Methods”, National Confrenece on Earthquake, Structure and Computational Methods, The Iranian Academic Center for Education Culture and Research, Kerman Branch, Kerman, Iran, 19-20 October, 2011.

192. Milad Ziyaei, Seyyedsadegh Naseralavi, Eysa Salajegheh, “Exploration of the Damages with Modified Particle Swarm Optimization Algorithm Using Static Response”, National Confrenece on Earthquake, Structure and Computational Methods, The Iranian Academic Center for Education Culture and Research, Kerman Branch, Kerman, Iran, 19-20 October, 2011.

29

193. Saleheh Gerist, Javad Salajegheh, Peyman Tokzadeh Mahani, Eysa Salajegheh, “Structural Damage Detection Using Modal Strain Energy and Genetic Algorithm”, National Confrenece on Earthquake, Structure and Computational Methods, The Iranian Academic Center for Education Culture and Research, Kerman Branch, Kerman, Iran, 19-20 October, 2011.

194. Saleheh Gerist, Seyyedsadegh Naseralavi, Eysa Salajegheh, Javad Salajegheh, “Determination of the Damages Using Genetic Algorithm and Sensitivity Analysis”, National Confrenece on Earthquake, Structure and Computational Methods, The Iranian Academic Center for Education Culture and Research, Kerman Branch, Kerman, Iran, 19-20 October, 2011.

195. Mohsen Jashnesedeh, Eysa Salajegheh, Mostafa Mashayekhi, “Siesmic Shape Optimum Design of Double – Layer Barrel Vaults Using Genetic Algorithms”, National Confrenece on Earthquake, Structure and Computational Methods, The Iranian Academic Center for Education Culture and Research, Kerman Branch, Kerman, Iran, 19-20 October, 2011.

196. Seyyedmohammadali Razavizadeh, Eysa Salajegheh, Mohsen Khatibinia, “Assessment of the Linear Response of Structures against Produced Artificial Acceleration Records Using Wavelet Transforms”, National Confrenece on Earthquake, Structure and Computational Methods, The Iranian Academic Center for Education Culture and Research, Kerman Branch, Kerman, Iran, 19-20 October, 2011.

197. Amir Saber, Aliasghar Aminiyan, Eysa Salajegheh, Saeid Shojaei Bagheyni, “Investigation of the Measure of Effects the Shape Design Variables of Arch Dams Against Earthquake”, National Confrenece on Earthquake, Structure and Computational Methods, The Iranian Academic Center for Education Culture and Research, Kerman Branch, Kerman, Iran, 19-20 October, 2011.

198. Majid Yousefi, Hesam Yazdani, Eysa Salajegheh, Peyman Torkzadeh Mahani, “Presentation some Relations for Estimation Coefficient of Subgrade Reaction in Clayey Soils”, National Confrenece on Earthquake, Structure and Computational Methods, The Iranian Academic Center for Education Culture and Research, Kerman Branch, Kerman, Iran, 19-20 October, 2011.

199. Majid Yousefi, Hesam Yazdani, Eysa Salajegheh, Peyman Torkzadeh Mahani, “Study of Effect Increasing the Net Cross – Section of Micropiles on Decrease the Foundation Settlement and it’s Effect on the Coefficient of Subgrade Reaction in Clayey Soils”, National Confrenece on Earthquake, Structure and Computational Methods, The Iranian Academic Center for Education Culture and Research, Kerman Branch, Kerman, Iran, 19-20 October, 2011.

200. Sajjad Gharehbaghi, Eysa Salajegheh, Mohsen Khatibinia, “Evaluation of Seismic Energy Demand of Reinforced Concrete Moment Resistant Frames Considering Soil - Structure Interaction Effects”, 11th International Conference on Computational Structures Technology and 8th International Conference on Engineering Computational Technology, Dubrovnik, Croatia, 4-7 September, 2012.

30

201. Javad Salajegheh, Eysa Salajegheh, Mohsen Khatibinia, Shirin Khosravi, “A hybrid Meta - Heuristic Method and Weighted Least Squares Support Vector Machine for Optimal Shape Design of Gravity Dams”, 11th International Conference on Computational Structures Technology and 8th International Conference on Engineering Computational Technology, Dubrovnik, Croatia, 4-7 September, 2012.

202. Mehdi Momeni, Hessam Yazdani, Kazem Fakharian, Ali Shafiee, Javad Salajegheh, Eysa Salajegheh, “Case Study of a Micropiled Raft Foundation Design in Soft Calcareous Sandy Soil in Kerman, Iran”, 4th International Conference on Site Characterization, Pernambuco, Brazil, 18-21 September, 2012.

203. Abdolhamid Soleymani, Eysa Salajegheh, “Optimum Design of Continuous Bridges (Prestressed Concrete) with Variable Cross – Section” , 1st Conference of Civil and Development, Islamic Azad University of Lashtenesha, Zibakenar, Iran, 23 February, 2012.

204. Hamzeh Karamooziyan, Seyyedsadegh Naseralavi, Eysa Salajegheh, “Structural Damage Detection Using Regularization Method of Tikhonov”, 1st Conference of Civil and Development, Islamic Azad University of Lashtenesha, Zibakenar, Iran, 23 February, 2012.

205. Hamzeh Karamooziyan, Reza Zare, Seyedsadegh Naseralavi, Eysa Salajegheh, “Tikhonov and Truncated Singular Value Decomposition Regularizations for Damage Detection under Noisy Measurements”, 4th International Conference on Seismic Retrofitting Earthquake Engineering and New Technology on Retrofitting”, Tabriz, Iran, 2-4 May, 2012.

206. Samira Kheradmand, Eysa Salajegheh, “Damage Detection in Plate Structures by Wavelet Packet Transform”, 4th International Conference on Seismic Retrofitting Earthquake Engineering and New Technology on Retrofitting”, Tabriz, Iran, 2-4 May, 2012.

207. Saleheh Gerist, Seyedsadegh Naseralavi, Eysa Salajegheh, “Damage Detection of Beam - Like Structures Using an Improved Genetic Algorithm”, 9th International Congress on Civil Engineering, Isfahan University of Technology, Isfahan, Iran, 8-10 May, 2012.

208. Aliasghar Aminiyan, Amir Saber, Eysa Saljegheh, “Shape Optimization of Arch Dams Subjected to Dynamic Analysis Using Particle Swarm Optimization Algorithm”, 9th International Congress on Civil Engineering, Isfahan University of Technology, Isfahan, Iran, 8-10 May 2012.

209. Sahar Beygzadeh, Eysa Salajegheh, “Sensor Placement Optimization for Damage Detection in Structures”, 9th International Congress on Civil Engineering, Isfahan University of Technology, Isfahan, Iran, 8-10 May, 2012.

210. Sahar Beygzadeh, Peyman Torkzadeh Mahani, Seyyedsadegh Naseralavi, Eysa Salajegheh, “Presentation an Algorithm for Determining Sensor Placement Optimization in Order to Determining the Damages in Reinforced Concrete Frames” ,

31

1st National Confrence on Industry of Concrete, International Center for Science, High Technology and Environmental Sciences, Kerman, Iran, 24-25 May, 2012.

211. Omid Rasouli, Javad Salajegheh, Eysa Salajegheh, “Determination the Depth and Locations of Cracks in Space Structures Using Neural Networks”, Ministry of Interior, Tehran, Iran, 19-20 June, 2012.

212. Reza Kamyab Moghaddas, Eysa Salajegheh, “Optimum Design of Scallop Domes”, 3th National Conference on Earthquake and Structure”, The Iranian Academic Center for Education, Culture and Research, Kerman Branch, Kerman, Iran, 17-18 October, 2012.

213. Pedram Salajegheh, Eysa Salajegheh, Saeid Shojaei Bagheyni, Mohsen Khatibinia, “Effect of Earthquake Direction on Seismic Performance of Three Dimensional Concrete Frames with Unsymmetric Distribution of Shear Walls”, 3th National Conference on Earthquake and Structure, The Iranian Academic Center for Education, Culture and Research, Kerman Branch, Kerman, Iran, 17-18 October, 2012.

214. Omid Rasouli, Seyyedsadegh Naseralavi, Javad Salajegheh, Eysa Salajegheh, Hosein Nezamabadipour, “Comparision the Various Responses in Damage Detection of Domes Using Neural Networks”, 3th National Conference on Earthquake and Structure, The Iranian Academic Center for Education, Culture and Research, Kerman Branch, Kerman, Iran, 17-18 October, 2012.

215. Peyman Tokzadeh Mahani, Sahar Beygzadeh, Seyyedsadegh Naseralavi, Eysa Salajegheh, “Sensor Placement Optimization for Damage Detection in Structures Using Geometrical Interpretation”, 3th National Conference on Earthquake and Structure, The Iranian Academic Center for Education, Culture and Research, Kerman Branch, Kerman, Iran, 17-18 October, 2012.

216. Hamed Noferesti, Eysa Salajegheh, Fazlollah Soltani, “The Partametric Study of Piled – Raft Foundation in Layered Soft Clayey Soil Using Numerical Simulation”, 3th National Conference on Earthquake and Structure, The Iranian Academic Center for Education, Culture and Research, Kerman Branch, Kerman, Iran, 17-18 October, 2012.

217. Mostafa Rezayi Taziyani, Eysa Salajegheh, Peyman Torkzadeh Mahani, Mohsen Khatibinia, “Seismic Reliability of Special Steel Moment Frames with Considering the Effects of Panel Zones”, 3th National Conference on Earthquake and Structure, The Iranian Academic Center for Education, Culture and Research, Kerman Branch, Kerman, Iran, 17-18 October, 2012.

218. Siyavash Fat Hi Younesi, Peyman Torkzadeh Mahani, Eysa Salajegheh, “Optimum Design of Structures Using Modified Particle Swarm Optimization Algorithm”, 2nd National Conference on Stracture, Earthquake and Geotechnics, Higher Education Institute of Pardisan, Babolsar, 23 November, 2012.

219. Hamed Noferesti, Eysa Salajegheh, Fazlollah Soltani, “Three Dimensional Analysis of Piled – Raft Foundations in Homogeneous Sandy Soil and Layered Sandy Soil Using

32

Finite Element Method”, 2nd National Conference on Stracture, Earthquake and Geotechnics, Higher Education Institute of Pardisan, Babolsar, 23 November, 2012.

220. Reza Zare, Seyyedmohammad Morasseii, Eysa Salajegheh, “Assessment of Dynamic Responses in Damage Detection of Domes Using Sensitivity – Based Damage Detection and Regularization Method of Tikhonov”, 2nd National Conference on Stracture, Earthquake and Geotechnics, Higher Education Institute of Pardisan, Babolsar, 23 November, 2012.

221. Reza Kamyab moghaddas, Hooshiyar Nooshin, Eysa Salajegheh, “The Effects of Arching Styles on the Behavior of Scallop Domes”, 4th National Conference on Earthquake and Structure”, The Iranian Academic Center for Education, Culture and Research, Kerman Branch, Kerman, Iran, 24-25 April, 2013.

222. Mostafa Rezayi Taziyani, Mohsen Khatibinia, Eysa Salajegheh, Peyman Torkzadeh Mahani, “Investigation the Seismic Performance of Special Moment Frames with Considering Soil – Structure Interaction”, 4th National Conference on Earthquake and Structure”, The Iranian Academic Center for Education, Culture and Research, Kerman Branch, Kerman, Iran, 24-25 April, 2013.

223. Siavash Fat Hi Younesi, Peyman Torkzadeh Mahani, Eysa Salajegheh, “Optimized Scheme of Double Layer Grids Using Reifined Particle Swarm Optimization and Reliability Constrains”, 7th National Congress on Civil Engineering, University of Sistan and Baluchestan, Zahedan, Iran, 7-8 May, 2013.

224. Abouzar Tabarsi, Eysa Salajegheh, Seyyedsadegh Naseralavi, “Comparision the Methods of Sensitivity Analytsis in Damage Detection of Structures”, 7th National Congress on Civil Engineering, University of Sistan and Baluchestan, Zahedan, Iran, 7-8 May, 2013.

225. Hamed Noferesti, Mohammadhosein Bagheripour, Eysa Salajegheh, Fazlollah Soltani, “Analysis of Piled – Raft Foundation in Sndy Soils and Clayey Soils Using Three Dimensional Finite Element Method”, 7th National Congress on Civil Engineering, University of Sistan and Baluchestan, Zahedan, Iran, 7-8 May, 2013.

226. Mostafa Rezayitaziyani, Peyman Torkzadeh Mahani, Eysa Salajegheh, Mohsen Khatibinia, “Investigation of the Seismic Performance of Special Moment Steel Frames Using Nonlinear Incremental Dynamic Analysis with Considering Soil – Structure Interaction”, 7th National Congress on Civil Engineering, University of Sistan and Baluchestan, Zahedan, Iran, 7-8 May, 2013.

227. Asma Mehdipour Rabori, Eysa Salajegheh, Mohammadjavad Fadaei, “Optimization of the Semi – Immersion Platform Using Particle Swarm Optimization Algorithm”, 7th National Congress on Civil Engineering, University of Sistan and Baluchestan, Zahedan, Iran, 7-8 May, 2013.

228. Amin Salajegheh, Javad Salajegheh, Eysa Salajegheh, “Damage Detection and Comparison of Curvelet Transform and Wavelet Transform for Damage Detection in

33

Plates”, 7th National Congress on Civil Engineering, University of Sistan and Baluchestan, Zahedan, Iran, 7-8 May, 2013.

229. Omid Rasouli, Seyyedsadegh Naseralavi, Eysa Salajegheh, Hosein Nezamabadipour, “Comparison of Neural Networks and Structural Responses in Determining Damage Detection in Structures”, 7th National Congress on Civil Engineering, University of Sistan and Baluchestan, Zahedan, Iran, 7-8 May, 2013.

230. Amir Alimardani, Eysa Salajegheh, Javad Salajegheh, “Shape Optimization of Concrete Shells Using Modified Particle Swarm Optimization Algorithm and B – Spline Curves”, 7th National Congress on Civil Engineering, University of Sistan and Baluchestan, Zahedan, Iran, 7-8 May, 2013.

231. Mohammadhosein Salari, Eysa Salajegheh, “Assessment of the Response of Structures against Explosion”, 7th National Congress on Civil Engineering, University of Sistan and Baluchestan, Zahedan, Iran, 7-8 May, 2013.

232. Saeid Behravesh, Peyman Torkzadeh Mahani, Eysa Salajegheh, “Study of Crack Progress in Shear Walls in Various Positions of Reinforcement”, 7th National Congress on Civil Engineering, University of Sistan and Baluchestan, Zahedan, Iran, 7-8 May, 2013.

233. Shahram Moomivand, Seyyedsadegh Naseralavi, Eysa Salajegheh, Javad Salajegheh, Peyman Torkzadeh Mahani, “Determination of the Optimal Location of Static Loads in Damage Detection Using Gravitational Search Algorithm”, 7th National Congress on Civil Engineering, University of Sistan and Baluchestan, Zahedan, Iran, 7-8 May, 2013.

Lecture Books (in Persian ):

1. Eysa Salajegheh, Structural Analysis (1982).

2. Eysa Salajegheh, Matrix Methods of Structural Analysis (1983).

3. Eysa Salajegheh, Strength of Materials (1986).

4. Eysa Salajegheh, Steel Design of Structures (1988).

5. Eysa Salajegheh, Finite Element Methods: Plates and Shells (1994).

6. Eysa Salajegheh, An Introduction to Earthquake Engineering (1994).

34

Invited Seminars:

1. “Optimum Design of Space Structures”, University of California, Santa Barbara, United States of America, 1985.

2. “Space Structures”, Iran University of Science and Technology, Tehran, Iran, 1986.

3. “Behavior of Space Structures”, Iranian Society of Civil Engineers, Tehran, Iran, 1986.

4. “Introducing the Space Structures”, University of Sistan and Baluchestan, Zahedan, Iran, 1987.

5. “Space Structures and Optimization”, Ferdowsi University of Mashhad, Mashhad, Iran, 1990.

6. “Optimum Design of Space Structures”, Shahid Bahonar University of Kerman, Kerman, Iran, 1990.

7. “Structural behavior of Space Structures”, University of Sistan and Baluchestan, Zahedan, Iran, 1993.

8. “Optimum Design of Structures”, Shahid Bahonar University of Kerman, Kerman, Iran, 1993.

9. “Design of Structures against Earthquake”, Society of Civil Engineers, Yasouj, Iran, 1994.

10. “Earthquake Engineering”, Organization of Civil and Architectural Engineers, Kerman, Iran, 1994.

11. “Space Structures”, Organization of Civil and Architectural Engineers, Kerman, Iran, 1995.

12. “Design of Structures against Earthquake”, Natural Disaster Week, Mashhad, Iran, 1997.

13. “Advances in Structural Optimization”, 1st Scientific and Specialty Conference of Iranian Society of Civil Engineers, Tehran, 1999.

14. “Optimum Design of Space Structures”, 1st National Conference on Space Structures, Tehran, 2000.

15. “Structural Aspects and Collapse of New York City's World Trade Center”, Society of Civil Engineering Students, Kerman, Iran, 2001.

16. “Structural Aspects and Collapse of New York City's World Trade Center”, University of Sistan and Baluchestan, Zahedan, Iran, 2002.

35

17. “Optimum Design of Space Structures”, Shahid Bahonar University of Kerman, Kerman, Iran, 2003.

18. “Optimum Design of Structures by Genetic Algorithm”, Sharif University of Technology, Tehran, Iran, 2004.

19. “Optimum Design of Structures against Earthquake”, Shahid Bahonar University of Kerman, Kerman, Iran, 2004.

20. “Design of Structures for Earthquake Loads”, Ferdowsi University of Mashhad, Iran, 2004.

21. “Optimum Shape Design of Structures by Genetic Algorithm”, Sharif University of Technology, Tehran, Iran, 2004.

22. “Optimum Design of Space Structures”, Short Courses on Space Structures, Shahid Bahonar University of Kerman, Iran, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013.

23. “Space Structures”, Iranian Construction Engineering Organization Province of Kohkiloyeh and boyer Ahmad, Yasouj, Iran, 2007.

24. “Space Structures and Tall Buildings”, Iranian Construction Engineering Organization Province of Fars, Shiraz, Iran, May, 2013.

Undergraduate Projects Supervisor: Over 1500 Different Projects Related to Steel and Concrete Structures.

Master of Science – Dissertation – Supervisor:

1. Javad Salajegheh, “Continuous and Discrete Optimization of Dams’s Outlet Gates via Penalty Approaches and Approximation Concepts”, Shahid Bahonar University of Kerman, Kerman, Iran, September, 1994.

2. Omid Sarmadi, “P – Delta Analysis for Building Systems”, Shahid Bahonar University of Kerman, Kerman, Iran, January, 1998.

3. Omid Sheikholeslam, “Optimum Design of Structures by Genetic Algorithm and Simulated Annealing”, Shahid Bahonar University of Kerman, Kerman, Iran, June, 1998.

4. Ali Heidari, “Optimum Design of Structures for Earthquake Using Approximation Analysis”, Shahid Bahonar University of Kerman, Kerman, Iran, November, 1998.

36

5. Mohsen Heidari, “Optimization of Prestressed Continuous Beams”, Shahid Bahonar University of Kerman, Kerman, Iran, November, 1998.

6. Mohammadreza Shahiri, “Application of Fuzzy Methods in Structural Optimization”, Shahid Bahonar University of Kerman, Kerman, Iran, November, 1998.

7. Ali Rahmani Firoozjaeei, “Optimization of Concrete Gravity Dams with Stress and Displacement Constraints”, Shahid Bahonar University of Kerman, Kerman, Iran, November, 1998.

8. Ramin Siyabi Shahrivar, “Structural Optimization Using Neural Networks”, Shahid Bahonar University of Kerman, Kerman, Iran, November, 1998.

9. Mohammad Dehghani Moghanjooghi, “Analysis of Plates and Shells Using Beam Elements”, Shahid Bahonar University of Kerman, Kerman, Iran, January, 1999.

10. Mohammadreza Torkamani, “Optimum Design of Plates Structures with Frequency Constraints Using Approximation Methods”, Shahid Bahonar University of Kerman, Kerman, Iran, January, 1999.

11. Gholamreza Sattar Sheikhi, “Optimum Design of Structures with Frequency Constraint by Second Order Approximation”, Shahid Bahonar University of Kerman, Kerman, Iran, January, 1999.

12. Mohammadreza Saeidipour, “Optimization of Concrete Structures”, Shahid Bahonar University of Kerman, Kerman, Iran, January, 1999.

13. Ali Tavakkoli, “Optimum Design of Steel Frames with Earthquake Forces by Equivalent Static and Pseudo – Dynamic Analysis Methods”, Shahid Bahonar University of Kerman, Kerman, Iran, September, 1999.

14. Behrouz Mianabadi, “Modification of Effective Length Factor for Thin – Walled Open Cross Sections Using Generalized Beam – Column Theory”, Shahid Bahonar University of Kerman, Kerman, Iran, September, 1999.

15. Mahdi Moridi, “Optimum Design of Space Structures”, Khajeh Nasireddin Tousi Univerisity of Technology, Tehran, Iran, September, 1999.

16. Mohammadreza Mohammadizadeh, “Optimum Design of Steel Structures Subjected to Earthquake Loads with Discrete Variables”, Shahid Bahonar University of Kerman, Kerman, Iran, September, 2000.

17. Koroush Lotfi, “Optimum Design of Jacket Structures by Modified Genetic Algorithm”, Shahid Bahonar University of Kerman, Kerman, Iran, September, 2001.

18. Mohammad Najjar, “Optimum Design of Steel Frames with Semi – Rigid Connections”, Shahid Bahonar University of Kerman, Kerman, Iran, September, 2001.

37

19. Saeed Gholizadeh GhaleAziz, “Optimum Design of Space Structures by an Improved Genetic Algorithm Using Radial Basis Functions and CP Neural Networks”, Shahid Bahonar University of Kerman, Kerman, Iran, December, 2002.

20. Alireza Lavaei, “Optimum Design of Space Structures by Genetic Algorithms and Artificial Neural Networks”, Shahid Bahonar University of Kerman, Kerman, Iran, December, 2002.

21. Hasan Pouresmaeil, “Optimization of Space Structures with Semi – Rigid Connections and Nonlinear Response Using Genetic Algorithm and Neural Networks”, University of Mazandaran, Sari, Iran, January, 2003.

22. Ali Heydaripanah, “Determination of Compressive Strength of Asphalt Concrete Using Artificial Neural Networks”, Shahid Bahonar University of Kerman, Kerman, Iran, July, 2003.

23. Mohammad Torabi Langari, “Effects of Vertical Component of Earthquake on Double - Layer Grids”, Islamic Azad University of Kerman, Kerman, Iran, September, 2003.

24. Farzad Hejazi, “Optimization of Active Control Using Genetic Algorithm and Neural Networks”, Islamic Azad University of Kerman, Kerman, Iran, September, 2003.

25. Alireza Rasekhi, “Optimum Design of Joints in Space Structures”, Islamic Azad University of Kerman, Kerman, Iran, September, 2003.

26. Mahdi Nobahari, “Optimum Location of Bracings of Three Dimensional Steel Structures by Genetic Algorithm Method”, Shahid Bahonar University of Kerman, Kerman, Iran, December, 2003.

27. Mostafa Mashayekhi, “Optimum Topology and Support Location of Space Structures by Genetic Algorithm”, Shahid Bahonar University of Kerman, Kerman, Iran, June, 2004.

28. Mohammad Khajehzadeh, “Optimum Design of Structures against Earthquake Using Wavelet Neural Network”, Islamic Azad University of Kerman, Kerman, Iran, September, 2004.

29. Ehsan Araghizadeh, “Survey of Vertical Component of Earthquake Factor on Double Layer Grids of Space Structures”, Islamic Azad University of Kerman, Kerman, Iran, October, 2004.

30. Mahdi Kaykha, “Shape Optimization of Double Layer Space Dome Using Genetic Algorithm”, Shahid Bahonar University of Kerman, Kerman, Iran, January, 2005.

31. Mohsen Khatibinia, “Optimization Geometry and Topology of Columns in Space Domes Using Genetic Algorithm”, Shahid Bahonar University of Kerman, Kerman, Iran, January, 2005.

32. Ahmad Mohammadzadeh, “Optimization of Rigid Frames under Earthquake Loads with Genetic Algorithm Using Neural Networks”, University of Sistan and Baluchestan, Zahedan, Iran, February, 2005.

38

33. Alireza Abbaszadeh, “Optimization of Space Structures under Dynamic Loads Subject to Nonlinear Conditions Using Neural Networks”, University of Sistan and Baluchestan, Zahedan, Iran, February, 2005.

34. Asadollah Esfahani, “Optimum Design of Concrete Breakwaters by Wavelet Theory for Approximating Dynamic Forces”, Shahid Bahonar University of Kerman, Kerman, Iran, September, 2005.

35. Mahmoud Layeghrafat, “Behavior Factor of Single Layer Space Structure Domes”, Islamic Azad University of Kerman, Kerman, Iran, September, 2005.

36. Saeid Amirshekari Soleymani, “Computation of the Behavior Factor for One – Layer Barrel Vaults Space Structures”, Islamic Azad University of Kerman, Kerman, Iran, December, 2007.

37. Omidali Samavati, “Investigation and Application of Wavelets to Seismic Analysis of Structures with Linear and Nonlinear Characteristics”, Iran, Islamic Azad University of Kerman, Kerman, Iran, June, 2006.

38. Ahad Farbood, “Optimal Design of Steel Frames by Using Performance – Based Design Method”, Shahid Bahonar University of Kerman, Kerman, Iran, August, 2006.

39. Mohsen Sadeghi Sabzevari, “Optimal Seismic Performance – Based Design of Steel Frames Using Nonlinear Pushover Analysis”, Shahid Bahonar University of Kerman, Kerman, Iran, August, 2006.

40. Mohammadamir Sherafati Arshad, “Comparison of Fast Fourier Transform with Fast Wavelet Transform”, Islamic Azad University of Kerman, Kerman, Iran, September, 2006.

41. Reza Kamali SalehAbad, “Calculation and Plot of the Vertical Reflection Spectrum”, Shahid Bahonar University of Kerman, Kerman, Iran, September, 2007.

42. Saeed Ghaderi Sohi, “Application of Cellular Automata Paradigm in Optimization of Space Structures and Dynamic Analysis of Structures”, Shahid Bahonar University of Kerman, Kerman, Iran, September, 2007.

43. Rouya Amiri, “Evaluation of Model Pushover Analysis to Estimate Seismic Response of Concrete Moment Resisting Frames with Shear Walls”, Islamic Azad University of Kerman, Kerman, Iran, September, 2007.

44. Nima Farzadnia, “Optimum Design of Space Structures Using Genetic Algorithm and Probabilistic Linear Neural Networks”, Islamic Azad University of Kerman, Kerman, Iran, September, 2007.

45. Hesam Mehrabi kermani, “Preparation a Structural Software for Analyzing and Optimization Using Neural Networks, Genetic Algorithm, Wavelet Theory and Unified Messaging Language”, Islamic Azad University of Kerman, Kerman, Iran, September, 2007.

39

46. Hooman Habib Agahi, “Performance – Based Optimization and Reliability of RCS Frames”, Shahid Bahonar University of Kerman, Kerman, Iran, September, 2008.

47. Afshin Salajegheh, “Equivalent Earthquake Loads for Some Families of Domes”, Shahid Bahonar University of Kerman, Kerman, Iran, September, 2008.

48. Alireza Behzadi, “Generation of Nonlinear Modification Factor and Acceptance Criteria in Performance – Based Design of Unreinforced Masonry Buildings”, Shahid Bahonar University of Kerman, Kerman, Iran, September, 2008.

49. Afshin Mohammadi, “Automated Performance – Based Design of Concentrically Steel Braced Frames”, Islamic Azad University of Kerman, Kerman, Iran, November, 2008.

50. Abdorreze Ghorbani koohbanani, “Behavior Assessment of Existing Masonry Buildings on Collapsible Soils with Effect of Soil - Structure Interaction”, Islamic Azad University of Kerman, Kerman, Iran, August, 2009.

51. Iman Masouri, “Seismic Reliability of Double Layer Grid Space Structures”, Shahid Bahonar University of Kerman, Kerman, Iran, September, 2009.

52. Nima Farhadi, “Optimal Pile Arrangement in Piled Two Strip Foundation According to Structural Performance Level”, Shahid Bahonar University of Kerman, Kerman, Iran, September, 2009.

53. Amirhosein Orumiyehee, “Probabilistic Seismic Hazard Model Based on Stochastic Cellular Automata”, Shahid Bahonar University of Kerman, Kerman, Iran, September, 2009.

54. Saeed Seyfoori, “Investigation of Seismic Behavior of Brick Jack Arch Slabs in Unreinforced Masonry Buildings”, Islamic Azad University of Kerman, Kerman, Iran, February, 2010.

55. Zahra FakkorBafandeh, “Consideration of Effect Confining Joints of Reinforced Concrete Structures with Fiber Reinforced Polymer”, Shahid Bahonar University of Kerman, Kerman, Iran, April, 2010.

56. Ahmad Amiri, “Optimum Design of Three Dimensional Steel Frames against Earthquake by New Penalty Functions Using Particle Swarm Optimization”, Shahid Bahonar University of Kerman, Kerman, Iran, September, 2010.

57. Yousef Askari Dolatabad, “Optimization of Number and Arrangement of Micropiles in Micropiled Mat Foundation Using of Ant Colony Optimization Algorithm”, Kerman Graduate University of Advanced Technology, Kerman, Iran, September, 2010.

58. Arash Sharafiyan Ardakani, “Analysis of Buried Sewer Pipes Seismic Vulnerability”, Islamic Azad University of Kerman, Kerman, Iran, September, 2010.

59. Iman Shivafar, “Optimization Method for Anchored Quay Walls”, Islamic Azad University of Kerman, Kerman, Iran, September, 2010.

40

60. Bagher Mohammadi, “Application of Cellular Automata Theory and Artificial Intelligence in Dynamic Analysis and Optimal Design of Structures against Earthquake”, Shahid Bahonar University of Kerman, Kerman, Iran, January, 2011.

61. Sajjad Gharebaghi, “Damage and Energy Concept – Based Optimum Seismic Design of Reinforced Concrete Structures”, Shahid Bahonar University of Kerman, Kerman, Iran, July, 2011.

62. Seyyedmahdi Sajjadi, “Shape Optimum Design of Concrete Gravity Dams against Earthquake Using New Optimization Algorithms”, Shahid Bahonar University of Kerman, Kerman, Iran, July, 2011.

63. Mohammad Ghanbari Vandi, “Optimum Design of Fixed Offshore Structure Using Approximate Methods for Prediction of Dynamic Forces”, Shahid Bahonar University of Kerman, Kerman, Iran, September, 2011.

64. Majid Yousefi, “The Optimal Design of Deep Foundations”, Kerman Graduate University of Advanced Technology, Kerman, Iran, September, 2011.

65. Mohsen Jashneseddeh, “Optimum Shape Design of Barrel Vaults Subjected to Earthquake Loads Using Genetic Algorithm”, Kerman Graduate University of Advanced Technology, Kerman, Iran, September, 2011.

66. Saleheh Gerist, “Structural Damage Detection Using Improved Genetic Algorithm”, Kerman Graduate University of Advanced Technology, Kerman, Iran, September, 2011.

67. Aliasghar Aminiyan, “Shape Optimization Design of Arch Dam by Spectral Analysis”, Islamic Azad University of Kerman, Kerman, Iran, September, 2011.

68. Amir Saber, “Shape Optimization of Arch Dam Using Hybrid Optimization Method”, Islamic Azad University of Kerman, Kerman, Iran, September, 2011.

69. Milad Ziaee, “A Two – Stage Method for Damage Detection of Layer Scale Structures Using Ant Colony Optimization Algorithm”, Kerman Graduate University of Advanced Technology, Kerman, Iran, November, 2011.

70. Reza Zare, “Evaluation of Different Responses in Damage Detection of Structures Using Methods Based on Sensitivity Analysis”, Kerman Graduate University of Advanced Technology, Kerman, Iran, January, 2012.

71. Mohammadali Razavizadeh Mashizi, “Production of Artificial Acceleration Records Consistent with the Target Spectrum Using Wavelet Transform and Particle Swarm Optimization Algorithm”, Kerman Graduate University of Advanced Technology, Kerman, Iran, January, 2012.

72. Hamzeh Karamooziyan, “The Application of Regularization Method in Damage Detection in order to Improve the Strengthen against Noisy Measurements”, Shahid Bahonar University of Kerman, Kerman, Iran, February, 2012.

41

73. Abdolhamid Soleymani, “Optimum Design of Continuous Bridges (Prestressed Concrete)”, Shahid Bahonar University of Kerman, Kerman, Iran, February, 2012.

74. Samira Kheradmand, “Damage Detection in Plate Structures by Wavelet Analysis and the Severity of Damage”, Shahid Bahonar University of Kerman, Kerman, Iran, February, 2012.

75. Asma Mehdipour Rabori, “Optimization of Floating Structures Using Particle Swarm Optimization Algorithm”, Islamic Azad University of Kerman, Kerman, Iran, September, 2012.

76. Hamed Noferesti, “The Analysis of Piled Raft Foundation with Considering the Soil Type Effects Using Three Dimensional Finite Element Method”, Kerman Graduate University of Advanced Technology, Kerman, Iran, December, 2012.

77. Mostafa Rezayi Taziyani, “Evaluation of the Seismic Performance of Special Moment Frames Using Incremental Dynamic Analysis Considering the Soil – Structure Interaction”, Shahid Bahonar University of Kerman, Kerman, Iran, February, 2013.

78. Sahar Beygzadeh, “Sensor Placement Optimization for Damage Detection in Structures”, Kerman Graduate University of Advanced Technology, Kerman, Iran, February, 2013.

79. Siyavash Fat Hi Younesi, “Optimization of Double - Layer Grids Considering Reliability Constrains”, Kerman Graduate University of Advanced Technology, Kerman, Iran, February, 2013.

80. Pedram Salajegheh, “Assessment the Seismic Reliability of Reinforced Concrete Structures with Shear Walls against Changing the Angle of Earthquake”, Kerman Graduate University of Advanced Technology, Kerman, Iran, February, 2013.

81. Amir Alimardani, “Shape and Size Optimization of Concrete Shells Using B – Spline Curves”, Kerman Graduate University of Advanced Technology, Kerman, Iran, February, 2013.

82. Shahram Moumivand, “Optimization of Locations of Static Loads for Structural Damage Detection”, Kerman Graduate University of Advanced Technology, Kerman, Iran, March, 2013.

83. Abouzar Tabarsi, “Under Preparation”, Shahid Bahonar University of Kerman, Kerman, Iran, June, 2013.

84. Ebrahim Kheyrollah Nezhad Samakoush, “Investigation on Dynamic Response of Piled – Raft Foundation”, Kerman Graduate University of Advanced Technology, Kerman, Iran, 2013.

85. Shahin Sadeghi, “Under Preparation”, Kerman Graduate University of Advanced Technology, Kerman, Iran.

42

86. Parvaneh Sadeghi, “Under Preparation”, Kerman Graduate University of Advanced Technology, Kerman, Iran.

87. Saeed Behravesh, “Under Preparation”, Kerman Graduate University of Advanced Technology, Kerman, Iran.

88. Hamid Khabbaz, “Under Preparation”, Kerman Graduate University of Advanced Technology, Kerman, Iran.

89. Seyyedehzahra Hashemi Sisakht, “Under Preparation”, Shahid Bahonar University of Kerman, Kerman, Iran.

90. Fahimeh Ashouri, “Under Preparation”, Shahid Bahonar University of Kerman, Kerman, Iran.

Master of Science – Dissertation – Advisor:

1. Vahid Ghalami, “Mathematical Model of Yamchi Dam’s Reservoir Sedimentation and Provision of Dam’s Useful Life Age”, Islamic Azad University of Kerman, Kerman, Iran, September, 2003.

2. Reza Yazdani, “Optimum Design of Offshore Structures Subjected to Dynamic Loads Using Simulated Annealing and Approximate Calculations”, Shahid Bahonar University of Kerman, Kerman, Iran, January, 2004.

3. Seyedmohammad Seyyedpoor, “Optimum Design of Hollow Spherical Joints (NS) in Space Structures”, Shahid Bahonar University of Kerman, Kerman, Iran, March, 2004.

4. Davood Hamidian, “Shape Optimization of Two Arch Concrete Dams by Second Order Approximation”, Shahid Bahonar University of Kerman, Kerman, Iran, April, 2004.

5. Mohammadreza Ghadiri, “Optimum Design of Two Dimensional Frames with Frequency Constraints by Approximation Technique” Islamic Azad University of Kerman, Kerman, Iran, September, 2004.

6. Allahreza Moradi Garrosi, “Investigation of Seismic Behavior of Battened Columns”, Islamic Azad University of Kerman, Kerman, Iran, September, 2004.

7. Mohammad Ghasemi, “Optimization of Tapered Gabled Frames with Varying Moment of Inertia Using Neural Networks”, Islamic Azad University of Kerman, Kerman, Iran, September, 2004.

8. Mohsen Besharat, “Optimum Design of Offshore Platforms Using Wavelet Theory for Approximate Calculations of Dynamic Loads Response”, Shahid Bahonar University of Kerman, Kerman, Iran, March, 2005.

43

9. Alireza Hajizadeh Mohammad NasirKhani, “Optimization of Two and Three Layer Space Work by Using Genetic Algorithm”, Shahid Bahonar University of Kerman, Kerman, Iran, September, 2005.

10. Ghader Bagheri, “Height and Depth Optimization Space Structures Using Genetic Algorithm”, Shahid Bahonar University of Kerman, Kerman, Iran, September, 2005.

11. Farzad Ghaderi Bafti, “Optimization of Two Dimensional and Three Dimensional Frames under Static Loads by Approximation Methods”, Islamic Azad University of Kerman, Kerman, Iran, September, 2005.

12. Akbar Azadi, “Optimization of Sections and Topology of Structural Frames Using Modified Intelligence Genetic Algorithm, Under Spectral Dynamic Analysis”, University of Sistan and Baluchestan, Zahedan, Iran, September, 2005.

13. Gholamreza Atefat Doost, “Steel Shear Wall and Finding Optimum Deployment of Vertical and Horizontal Stiffeners in It with Genetic Algorithm and Wave Network”, Shahid Bahonar University of Kerman, Kerman, Iran, August, 2006.

14. Hamid Khosh Niyat, “Optimization of Steel Plane Frames with Semi – Rigid Connection against Earthquake Using Genetic Algorithm and Radial Wave Neural Network”, Shahid Bahonar University of Kerman, Kerman, Iran, August, 2006.

15. Morteza Ghasemi, “Optimization of Double – Layer Barrel Vaults Subject to Changes in Gravity and Lateral Loads Using Genetic Algorithm”, Islamic Azad University of Kerman, Kerman, Iran, September, 2006.

16. Mostafa Ghanei Tibloo, “Topology Optimization of Barrel Vaults Space Structures Using Genetic Algorithm”, Islamic Azad University of Kerman, Kerman, Iran, September, 2006.

17. Ehsan Oveysi, “Optimization of Buttress Dam’s Buttress via Approximation Concepts”, Islamic Azad University of Kerman, Kerman, Iran, December, 2006.

18. Mahdi Rshidi Mardkanloo, “Monitoring of Performance of X – Bracing Systems with 264th Code of the Planning and Management Organization of Iran”, Islamic Azad University of Kerman, Kerman, Iran, December, 2006.

19. Farhad Hamzeh Zarghani, “The Studdy of The Code’s Recommendations about Eccentric Braced Frames”, Shahid Bahonar University of Kerman, Kerman, Iran, February, 2007.

20. Reza Habibipour, “Evaluation of Reinforced Concrete Frames Behavior Factor Strengthened Using Eccentric Steel Braces”, Shahid Bahonar University of Kerman, Kerman, Iran, June, 2007.

21. Masoud Biglarkhani, “Dynamic Behavior Assessment of Compliant Offshore Platforms”, Islamic Azad University of Kerman, Kerman, Iran, December, 2007.

22. Ali Fakhreddini, “Optimal Design of Reinforced Concrete Frames Using Direct Displacement Based Design”, Shahid Bahonar University of Kerman, Kerman, Iran, January, 2008.

44

23. Adel Ghaffari, “Choosing Method of Load Distribution for Nonlinear Static Procedure in Steel Satchel Connection Frames by Performance – Based Design”, Shahid Bahonar University of Kerman, Kerman, Iran, September, 2008.

24. Seyyedmahmoud Sadat Hoseini, “Optimization of Three Dimensional Steel Structures Based on Braces Topology and Column Rotation and Architectural Limits via Genetic Algorithm”, Shahid Bahonar University of Kerman, Kerman, Iran, September, 2008.

25. Amirhosein Farshchi, “Investigation of Opening and Stiffeners on the Behavior of Steel Shear Walls”, Islamic Azad University of Kerman, Kerman, Iran, September, 2008.

26. Alireza Esmaeilzadeh, “Optimum Design of Plates Using Neural Networks”, Islamic Azad University of Kerman, Kerman, Iran, September, 2008.

27. Iman Rostami Ravari, “Analysis of Ogee Spillway and It’s Plunge Pool, Physical Model”, Islamic Azad University of Kerman, Kerman, Iran, September, 2008.

28. Seyyedhamid Moafi Madani, “Investigating the Hinged Connections with Single and Double Side Web Angles”, Islamic Azad University of Kerman, Kerman, Iran, October, 2008.

29. Reza Tahernia, “Optimization of Structures with Seismic Base Isolators”, Islamic Azad University of Kerman, Kerman, Iran, March, 2009.

30. Seyyedmahmoud Hoseini Safa, “Optimum Design of Clayey Core for Soil Dams by Genetic Algorithm Method”, Islamic Azad University of Kerman, Kerman, Iran, August, 2009.

31. Mohammadhadi Pourfar, “Optimum Design of Concrete Building Having Shear Wall by Ant Colony Optimization Algorithm”, Shahid Bahonar University of Kerman, Kerman, Iran, September, 2009.

32. Meysam Mahmoudi Kohan, “Evaluation Behavior of Eccentrically Brace Frames and Added Damping and Stiffness Braced Frames” , Shahid Bahonar University of Kerman, Kerman, Iran, September, 2009.

33. Sajjad Safarzadeh, “Determination Sediment Distribution Process in Kardeh Reservoir Using Artificial Neural Networks Method”, Islamic Azad University of Kerman, Kerman, Iran, February, 2010.

34. Mahdi Baradaran Attar Moghaddas, “Evaluation of Seismic Performance of Eccentrically Braced Frames”, Shahid Bahonar University of Kerman, Kerman, Iran, September, 2010.

35. Ali Nasirzadeh Pahrabad, “Study the Behavior of Shear Wall Strengthened by Fiber Reinforced Polymer Using Finite Element Method”, Shahid Bahonar University of Kerman, Kerman, Iran, September, 2010.

36. Shahin Amini, “Study of Stress and Pore Pressure Behavior of Ardak Dam During Construction by Using Instrumentation Data and Comparing the Results with Analysis Amounts”, Islamic Azad University of Kerman, Kerman, Iran, September, 2010.

45

37. Alireza Vahedi, “Functionality Assessment of Groynes Constructed along Halil River Using Mike Zero Model”, Islamic Azad University of Kerman, Kerman, Iran, September, 2010.

38. Mohammad Roozpeykar, “Topology Optimization of Plates and Shells Using Nonlinear Level Set Method”, Islamic Azad University of Kerman, Kerman, Iran, September, 2010.

39. Javad Roozegar, “Determination and Optimization of Correct Model to Evalute Sedimantation in Karkheh River to Dorodzan Dam and Estimation the Dam’s Useful Life Age”, Islamic Azad University of Kerman, Kerman, Iran, September, 2010.

40. Vahid Chegini, “Analytical Investigated of Acceptance Criteria for Strengthened Beams with Fiber Glass Concrete”, Shahid Bahonar University of Kerman, Kerman, Iran, January, 2011.

41. Akram Mokhtari, “Simulation of Spillways Overflow by Finite Volume Method”, Shahid Bahonar University of Kerman, Kerman, Iran, February, 2011.

42. Morteza Beheshtifar, “Effect of Soil – Structure Interaction to Performance Level of Eccentrically Braced Frames”, Islamic Azad University of Kerman, Kerman, Iran, February, 2011.

43. Seyyedhosein Mahdavi, “Linear and Nonlinear Dynamic Analysis of Two Dimensional Frames Using Chebyshev Wavelets”, Islamic Azad University of Kerman, Kerman, Iran, March, 2011.

44. Mohammad Arjmand, “Optimal Design of Trusses with Mixed Variables Using Hybrid of Modified Particle Swarm Optimization Algorithm and Method of Moving Asymptotes”, Shahid Bahonar University of Kerman, Kerman, Iran, May, 2011.

45. Mahdi Pourzangi Abadi, “Determination of Importance of Pipe in Water Distribution Network Using Fuzzy Logic”, Shahid Bahonar University of Kerman, Kerman, Iran, May, 2011.

46. Mohammadhadi Bagheri Nezhad, “Determining the Frequency of Dominant Modes in Double Layer Grids by Using Fuzzy Logic, Genetic Algorithm Programming and Approximates Methods of Solving Eigenvalue Equation”, Shahid Bahonar University of Kerman, Kerman, Iran, June, 2011.

47. Mojtaba Mohammadiyan, “Structural Topology Optimization by Using Level Set Method”, Kerman Graduate University of Advanced Technology, Kerman, Iran, July, 2011.

48. Mojir Salehizadeh, “Optimum Design of Dam’s Outlet Gates Structure Using Artificial Intelligence Methods”, Islamic Azad University of Kerman, Kerman, Iran, August, 2011.

49. Aminreza Shojaei, “Embankment Dams Breach Parameters Prediction and Risk Assessment due to Failure (Case Study Baft Dam)”, Islamic Azad University of Kerman, Kerman, Iran, August, 2011.

46

50. Morteza Jabbari, “Evalution Seismic Nonlinear Behavior of Groundwater Reservoirs Using Finite Element Method and Considering Fluid – Structure Interaction”, Islamic Azad University of Kerman, Kerman, Iran, August, 2011

51. Farzaneh Zandi Qashqai, “Shape Optimization of Triple Layer Space Structures by Ant Colony Optimization Algorithm”, Shahid Bahonar University of Kerman, Kerman, Iran, September, 2011.

52. Mojtaba Khamseh, “Structural Damage Detection Using FRB Data and Particle Swarm Optimization Algorithm”, Kerman Graduate University of Advanced Technology, Kerman, Iran, September, 2011.

53. Sina Jabbarzadeh, “Shape Optimization of Double Layer Grids Subject to Earthquake Loading Using Quantum Behaved Particle Swarm Optimization Algorithm and Neural Network”, Kerman Graduate University of Advanced Technology, Kerman, Iran, September, 2011.

54. Mahdi Vajdiyan, “Seismic Reliability of Cable – Stayed Bridge Using Nonlinear Incremental Dynamic Analysis”, Shahid Bahonar University of Kerman, Kerman, Iran, December, 2011.

55. Mohammad Akhlaghi Boozani, “Optimization of Eccentrically Based Steel Frames by Performance Based Design”, Shahid Bahonar University of Kerman, Kerman, Iran, February, 2012.

56. Mostafa Ghelichi, “Improvement of Isogeometric Analysis Using Extended Finite Element for Crack Modeling”, Kerman Graduate University of Advanced Technology, Kerman, Iran, February, 2012.

57. Younes Goodarzi, “Damage Detection in Space Structures Using Model Strain Energy”, Kerman Graduate University of Advanced Technology, Kerman, Iran, February, 2012.

58. Afsaneh Iranmanesh, “Application of Time – Frequncy Response Spectrum in Assessment of Structure’s Behavior”, Islamic Azad University of Kerman, Kerman, Iran, February, 2012.

59. Rohollah Firoozabadi, “Hydrodynamic Analysis of Marine Float Structures Using Boundary Element Method”, Islamic Azad University of Kerman, Kerman, Iran, February, 2012.

60. Samaneh Salari, “Dynamic’s Pressure Analysis of Floodwater Evacuation System of Gotvand Dam by Fluent Model”, Islamic Azad University of Kerman, Kerman, Iran, March, 2012.

61. Omid Rasouli, “Damage Detection of Structures Using Neural Networks”, Shahid Bahonar University of Kerman, Kerman, Iran, September, 2012.

47

62. Mahdi Noormohammadiyan Tajabadi, “Analysis of Multilayered Plates Using Isogeometric Analysis with Nonclassic Theories”, Kerman Graduate University of Advanced Technology, Kerman, Iran, September, 2012.

63. Amin Salajegheh, “Comparison of Curvelet Transform and Wavelet Transform for Damage Detection in Structures”, Shahid Bahonar University of Kerman, Kerman, Iran, February, 2013.

64. Fatemeh Sarvi, “Damage Detection in Structures Based on Dynamic Response Using Finite Element Model Updating”, Kerman Graduate University of Advanced Technology, Kerman, Iran, February, 2013.

65. Mohammadreza Gheliyani Daryakenari, “Evaluation Performance Behavior of Irregular Structures Using Multicomponent Incremental Dynamic Analysis”, Kerman Graduate University of Advanced Technology, Kerman, Iran, March, 2013.

66. Seyyedmohammad Hadi Mortazavi, “Size and Shape Optimization of Trusses Using Improved Cuckoo Optimization Algorithm”, Islamic Azad University of Kerman, Kerman, Iran, March, 2013.

67. Arman Nia, “Under Preparation”, Kerman Graduate University of Advanced Technology, Kerman, Iran, 2013.

68. Mohammad Haj Esmaeili Kereshk, “Under Preparation”, Kerman Graduate University of Advanced Technology, Kerman, Iran, 2013.

69. Mohseneh Asadi Zeidabadi, “Under Preparation”, Kerman Graduate University of Advanced Technology, Kerman, Iran, 2013.

70. Mohammad Soleimani Mahani, “Under Preparation”, Kerman Graduate University of Advanced Technology, Kerman, Iran, 2013.

71. Mohammadreza Farrokhi, “Under Preparation”, Shahid Bahonar University of Kerman, Kerman, Iran.

72. Ramin Ghiyasi Sangani, “Under Preparation”, Shahid Bahonar University of Kerman, Kerman, Iran.

73. Farzad Shahryari, “Under Preparation”, Shahid Bahonar University of Kerman, Kerman, Iran.

74. Azim Ghayini, “Under Preparation”, Shahid Bahonar University of Kerman, Kerman, Iran.

75. Yaser Poursoltani Zarandi, “Under Preparation”, Shahid Bahonar University of Kerman, Kerman, Iran.

76. Seyyedeh Leyla Qomi, “Under Preparation”, Shahid Bahonar University of Kerman, Kerman, Iran.

48

Master of Science – Dissertation – Juror:

1. Seyyedabbas Pour Yaghoobi, “The Investigation of Mechanical Properties and Durability of Concrete Made by Sirjan’s and Ghodarsorkh’s Pozzolans (Kerman) and Their Comparison with Control Concrete”, Shahid Bahonar University of Kerman, Kerman, Iran, December, 1994.

2. Siyamak Raeisnia, “Determination of Critical Failure Surface in Earth Dams by Limit Analysis Method”, Shahid Bahonar University of Kerman, Kerman, Iran, January, 1995.

3. Fereydoon Abdollahinezhad, “Computation of Eigenvalue and Eigenvectors of Fluid – Structure Interaction Systems by Finite Element Method”, Shahid Bahonar University of Kerman, Kerman, Iran, February, 1995.

4. Hosein Mostafayi, “Substructuring for Efficient Analysis of Finite Element Method”, Islamic Azad University of Kerman, Kerman, Iran, March, 1996.

5. Alireza Mohammadi Bayazidi, “Substructuring for Efficient Analysis of Space Structures”, Islamic Azad University of Kerman, Kerman, Iran, March, 1996.

6. Hamid Shaeban Zadeh, “Application of Graph Theory in Civil Engineering”, Islamic Azad University of Kerman, Kerman, Iran, March, 1996.

7. Reza Hooshmand, “Optimum Analysis and Design of Steel Structures Using Object Oriented Programming”, Islamic Azad University of Kerman, Kerman, Iran, July, 1996.

8. Shahriyar Shahbaz Panahi, “Solution of Nonlinear Seepage Laplace Equation for Under Dam with Time – Dependent Variable Permeability Using Finite Element Method”, Shahid Bahonar University of Kerman, Kerman, Iran, December, 1999.

9. Majid Haddadi, “Numerical Study of the Vortex Flow around the Submerged Vanes”, Shahid Bahonar University of Kerman, Kerman, Iran, March, 2000.

10. Neptune Zeyni, “Improvement of Artificial Neural Networks Procedure in Optimum Design of Plate Girders”, Shahid Bahonar University of Kerman, Kerman, Iran, May, 2000.

11. Seyyedhamid Hashemi, “Behavior Analysis of Concrete Filled Steel Box Column Under Axial Load and Cyclic Lateral Load by Using Finite Element Method”, Shahid Bahonar University of Kerman, Kerman, Iran, September, 2001.

12. Ardovan Avaz Davani, “Application and Modification of ART2 Artificial Neural Network in Design of Structures”, Shahid Bahonar University of Kerman, Kerman, Iran, December, 2001.

49

13. Ali Negarizadeh, “The Study of the Mechanical Properties of Concrete Containing West – Joupar’s Pozzolan (Kerman) and their Comparison with Control Concrete”, Islamic Azad University of Kerman, Kerman, Iran, January, 2002.

14. Seyyedmostafa Ayatollahi Mousavi, “Displacement and Stress Analysis of Stiffened Columns Subjected to Wave Shocks”, Islamic Azad University of Kerman, Kerman, Iran, July, 2002.

15. Amirabbas Nezhadghaffar, “Elastic Stability of Rib Stiffened Columns with Variables Cross Sections”, Islamic Azad University of Kerman, Kerman, Iran, July, 2002.

16. Mahdi Rezvani, “Optimal Design of Sleeve Stiffened Compressive Members Using Neural Network”, Islamic Azad University of Kerman, Kerman, Iran, August, 2002.

17. Mohammad Darabi Nezhad, “Optimization of Sewer Networks”, Islamic Azad University of Kerman, Kerman, Iran, September, 2002.

18. Amirali Dadvar, “Determination of Optimum Slip Surface in Soil Slopes”, Islamic Azad University of Kerman, Kerman, Iran, September, 2002.

19. Abdolazim Zare, “Effective Length Factor of Column in Frames with Semi – Rigid Connections”, Islamic Azad University of Kerman, Kerman, Iran, September, 2002.

20. Mahdi Shokohiyan, “Optimal Ordering Using Graph Theory and Algebraic Graph Theory”, Islamic Azad University of Kerman, Kerman, Iran, September, 2002.

21. Mohammadmahdi Arabnezhad, “Uncommon Rigid and Semi – Rigid Connections”, Islamic Azad University of Kerman, Kerman, Iran, January, 2003.

22. Alireza Ghorbani Tappeh, “Using Artificial Neural Networks in Determining the Cross Section Area of the Air Vent in Dam Bottom Outlet Gates”, Shahid Bahonar University of Kerman, Kerman, Iran, January, 2003.

23. Dariush Kabolinezhad, “The Safety Inspection Schedule for Jiroft Dam”, Islamic Azad University of Kerman, Kerman, Iran, March, 2003.

24. Farshad Mehrabi, “The Effective of Specification of Knee Bracing Members of Ductility and Ultimate Strength of Frames”, Islamic Azad University of Kerman, Kerman, Iran, June, 2003.

25. Amir Ahmad Hedayat, “Evaluation of Various Types of Stiffeners on Ultimate Strength and Ultimate Rotation in Knee Joints with I – Section Columns”, Islamic Azad University of Kerman, Kerman, Iran, June, 2003.

26. Reza Mazloum Ardakani, “Analysis of Earthquake Soil – Structure Interaction Using Coupled Finite – Infinite Elements”, Islamic Azad University of Kerman, Kerman, Iran, September, 2003.

27. Mohsen Amini, “The Behavior of Tubular System Combined with Shear Core and Truss Belt”, Islamic Azad University of Kerman, Kerman, Iran, September, 2003.

50

28. Mahmoud Abbaszadeh, “Effects of Vertical and Horizontal Gaps on Earthquake Analysis of Tunnel Using Coupled Finite – Infinite Element Technique”, Islamic Azad University of Kerman, Kerman, Iran, November, 2003.

29. Mohammad Fat Hi Gelabi, “Optimization of Filter Dimension in Earth and Rockfill Dams”, Islamic Azad University of Kerman, Kerman, Iran, January, 2004.

30. Ahad Ouria, “Land Subsidence Modeling due to Cyclic Loading Produced from Ground Water Level Oscillation Using the Finite Element Method”, Shahid Bahonar University of Kerman, Kerman, Iran, June, 2004.

31. Kaveh Salajegheh, “A Simple Method for Evaluation for Tall Building’s Frequencies with P – Delta Cosiderations”, Islamic Azad University of Kerman, Kerman, Iran, September, 2004.

32. Hamidreza Mohammadzadeh, “Finite Element Template for Quadrilateral Plate Bending Element by Krichhoff Theory”, Islamic Azad University of Kerman, Kerman, Iran, September, 2004.

33. Masoud Ramezan Nezhad, “Optimal Plastic Analysis and Design of Planar Frames, Graph Theoretical Methods and Genetic Algorithm”, Islamic Azad University of Kerman, Kerman, Iran, February, 2005.

34. Masoud Taghavi Sheykh, “Numerical Hydrodynamic Pressure Analysis of Concrete Gravity Dams Subjected to Earhquake Loads”, Islamic Azad University of Kerman, Kerman, Iran, February, 2005.

35. Kamran Mohammadi, “Optimization the Support Locations and the Height in Triple Layer Grids”, Islamic Azad University of Kerman, Kerman, Iran, June, 2005.

36. Seyyedafshin Mohammadi Nodez, “Nonlinear Spatial Analysis of Structures Having Curved Beams with Finite Element Method Using Formulation Based on Curvature”, Islamic Azad University of Kerman, Kerman, Iran, June, 2005.

37. Hosein Khosravi, “Geometrically Nonlinear Behavior of the Stiffened Coupled Shear Walls”, Islamic Azad University of Kerman, Kerman, Iran, September, 2005.

38. Reza Amoozegar, “Finite Volume Modeling of One Dimensional Dam Break Problem with High Resolution Methods”, Islamic Azad University of Kerman, Kerman, Iran, September, 2005.

39. Iman Mohseni, “Behavior Factor Evaluation of Gate Bracing Systems under Seismic Loads”, Islamic Azad University of Kerman, Kerman, Iran, September, 2005.

40. Hamzeh Dehghani Rayeni, “Active Control of Structures under Earthquake Effects with Consideration of Geometrically Nonlinear Behavior”, Islamic Azad University of Kerman, Kerman, Iran, September, 2005.

41. Mohammadali Ghalami, “Three Dimensional Seepage Modeling in Nonhomogeneous Earth Dams”, Islamic Azad University of Kerman, Kerman, Iran, December, 2005.

51

42. Saman Akbar Ghannadiyan, “Solution of Flushing Equation by Secant Method”, Islamic Azad University of Kerman, Kerman, Iran, December, 2005.

43. Amirali Fakhr Samadi, “Response and Stability Analysis of Earth Dams Using Hybrid Frequency – Time Domain Method”, Islamic Azad University of Kerman, Kerman, Iran, December, 2005.

44. Mahdi Dehghan, “Optimum Location of Drainage Gallery in Concrete Gravity Dams with Genetic Algorithm”, Shahid Bahonar University of Kerman, Kerman, Iran, August, 2006.

45. Soroush Fakhrayi Nezhad, “Discussion of Rock Slopes Stability Analysis of the Right Side Rock Slope of Kosar Storage Dam”, Islamic Azad University of Kerman, Kerman, Iran, September, 2006.

46. Hasan Azadbeygi, “Interaction of Dam – Reservoir Using Boundary Radiation for Compressible and Incompressible Fluid”, Islamic Azad University of Kerman, Kerman, Iran, September, 2006.

47. Alireza Golestani, “Optimization the Number of Meshes in Double Layer Grids Using Genetic Algorithm”, Islamic Azad University of Kerman, Kerman, Iran, September, 2006.

48. Mahmoud Mohammadpour Mir, “Optimum Design of Space Trusses Under Earthquake Loading Using Ant Colony Optimization Algorithm”, Shahid Bahonar University of Kerman, Kerman, Iran, January, 2007.

49. Meysam Pour Ramezan, “Evaluation Thermal Cracking Because of Hydration of Cement in Hydraulic Structures” , Islamic Azad University of Kerman, Kerman, Iran, January, 2007.

50. Saeed Gilani, “Investigation of the Cracking of the Foundation and Piers of the Mill of Golgohar Min in Sirjan”, Islamic Azad University of Kerman, Kerman, Iran, March, 2007.

51. Armin Tadayyon, “Evaluation the Performance of Light Steel Frames Subjected to Earthquake Loads”, Islamic Azad University of Kerman, Kerman, Iran, March, 2007.

52. Mahdi Nikooyi, “Evaluation and Strengthening of Shah Nemat Allah Vali Historical Building against Earthquake”, Islamic Azad University of Kerman, Kerman, Iran, September, 2007.

53. Reza Mehrabiyan, “Comparing Different Methods of Scaling Seismograms with Regards to Nonlinear Behavior of Structures for Performance – Based Design”, Islamic Azad University of Kerman, Kerman, Iran, January, 2008.

54. Ali Zeyd Abadi Nezhad, “Effects of Corrosion on the Buckling of Compression Flange of Steel Beams”, Islamic Azad University of Kerman, Kerman, Iran, November, 2008.

55. Majid Honar, “Evaluation the Effects of Cutting Shear Walls in Tall Buildings with Frame – Wall System”, Islamic Azad University of Kerman, Kerman, Iran, March, 2009.

52

56. Ali Moeinaddini, “The Effect of Continuity and Mesh Refinement in Isogeometric Analysis”, Islamic Azad University of Kerman, Kerman, Iran, September, 2010.

57. Sobhan Rostami, “A New Direct Time Integration Method for Structural Using B – Spline Functions”, Islamic Azad University of Kerman, Kerman, Iran, September, 2010.

58. Rasoul Moradi Ajami, “Mathematical Formulation for Dynamic Analysis of Coupled Lateral – Torsional Frequencies of Tall Buildings”, Islamic Azad University of Kerman, Kerman, Iran, September, 2010.

59. Keyvan Hoseini Zeydabadi, “Optimization the Weight of Trusses Using Composition of Genetic Algorithm and Particle Swarm Optimizatin Algorithm”, Islamic Azad University of Kerman, Kerman, Iran, September, 2010.

60. Rasoul Moradi, “Presentation the Mathematical Relations for Analyzing Tall Buildings with Considering the Couples Torsionally – Bending Vibrations”, Islamic Azad University of Kerman, Kerman, Iran, September, 2010.

61. Ahmad Heydari, “Improving Seismic Performance of Special Truss Moment Frame”, Shahid Bahonar University of Kerman, Kerman, Iran, December, 2010.

62. Javad Mashhadi, “Torsional Vibration Control of Asymmetric Structures Using Viscous Damper”, Shahid Bahonar University of Kerman, Kerman, Iran, January, 2011.

63. Farhad Saedi Garaghani, “Considering Effects of Eccentricity in Story Levels in Analysis Results”, Islamic Azad University of Kerman, Kerman, Iran, February, 2011.

64. Mojtaba Ramezani Nasab, “Modeling of Nonlinear Analysis of Chevron Braces with Viscous Fluid Damper”, Islamic Azad University of Kerman, Kerman, Iran, February, 2011.

65. Meysam Ghiyas Abadi Farahani, “Shape and Topology Optimization of Thick Plate Under Static and Dynamic Loads Using Level Set Method”, Shahid Bahonar University of Kerman, Kerman, Iran, March, 2011.

66. Morteza Yousefi Dadras, “Equivalent Earthquake Loads for Some Families of Parabolic Shape Barrel Vaults”, Islamic Azad University of Kerman, Kerman, Iran, August, 2011.

67. Seyyedsaeid Hashemi Nasab, “The Effects of Initial Sampling Technique and Augmented Lagrangian Penalty Functions in Converged Rate of Metaheuristic Algorithm”, Islamic Azad University of Kerman, Kerman, Iran, August, 2011.

68. Masoud Aeineh Beygi, “Efficient Factors for Calculating Connection Forces of Gusset Plates for Beam to Column and the Behavior of X – Braces Comparing to Available Codes of Practice”, Islamic Azad University of Kerman, Kerman, Iran, September, 2011.

69. Mojtaba Pour Sadeghi Nezhad, “A Parametric Study on Slit Dampers Effect on Ductility of Rigid Connections”, Islamic Azad University of Kerman, Kerman, Iran, September, 2011.

53

70. Mahdiyeh Mirzayi, “Approximation Analysis of Nonstructural Cracks in Large Self – Compacting Concrete Masses in Hydraulic Structures”, Islamic Azad University of Kerman, Kerman, Iran, September, 2011.

71. Ebrahim Izadpanah Ravari, “Topology Optimization of Continuous Domains by Level Set Method Based on NURBS Basis Function”, Shahid Bahonar University of Kerman, Kerman, Iran, February, 2012.

72. Ehsan Jazebi, “Investigation of the Effective Parameters on the Ductility of Rigid Connection with Top and Bottom Seat Plates”, Islamic Azad University of Kerman, Kerman, Iran, February, 2012.

73. Mohammad Amin Rahmaniyan, “Effects of Connection Behavior in the Seismic Performance of Eccentrically Braced Frames Based in the Near – Fault Earthquakes”, Islamic Azad University of Kerman, Kerman, Iran, February, 2012.

74. Mohammad Ershad Rahmaniyan, “Application of the Method of the Yield Point Spectra in Performance Design of Steel and Reinforced Concrete Frames Based on the Maximum Displacement and Required Plasticity”, Islamic Azad University of Kerman, Kerman, Iran, February, 2012.

75. Hosein Naghib Zadeh, “The Most Appropriate Model for Estimation the Design Wave in Bandar Abbas”, Islamic Azad University of Kerman, Kerman, Iran, February, 2012.

76. Seyyedmohammad Morassei, “Determining the Pressure of Force and Surface Settlement by Analytical and Numerical Methods in North – South Path of Line Seven of Tehran Method”, Kerman Graduate University of Advanced Technology, Kerman, Iran, February, 2012.

77. Aliakbar Fatehi Dindarloo, “Effect of Vertical Component of Earthquake Forces on Horizontal Displacement Structures with P - Delta Effects in Nonlinear Dynamic Analysis”, Islamic Azad University of Kerman, Kerman, Iran, September, 2012.

78. Ehsan Naeemi Tabasian, “Extension of Hybrid Frequency – Time Domain Method Using Segmentation Approach for Seismic Ground Response Analysis”, Shahid Bahonar University of Kerman, Kerman, Iran, February, 2013.

79. Saman Sanjari, “Effect of Lateral Bearing System of Steel Structures on the Progressive Collapse”, Shahid Bahonar University of Kerman, Kerman, Iran, February, 2013.

Doctor of Philosophy – Thesis – Supervisor:

1. Javad Salajegheh, “Continuous – Discrete Variable Optimization of Space Structures Using Approximation Concepts”, Shahid Bahonar University of Kerman, Kerman, Iran, October, 2000.

54

2. Hosein Ebrahimi Farsangi, “Topology Optimization of Space Structures by Genetic Agorithm”, University of Surrey, Guildford, Surrey, England, September, 2002.

3. Ali Heidari, “Optimum Design of Structures against Earthquake by Advanced Optimization Methods”, Shahid Bahonar University of Kerman, Kerman, Iran, July, 2004.

4. Peyman Torkzadeh Mahani, “Optimum Design of Structures using New Approximation Methods”, Shahid Bahonar University of Kerman, Kerman, Iran, November, 2008.

5. Saeid Gholizadeh Ghaleaziz, “Optimal Seismic Design of Structures by Advanced Artificial Intelligence Method”, Shahid Bahonar University of Kerman, Kerman, Iran, July, 2009.

6. Mostafa Mashayekhi, “Reliability – Based Topology Optimization of Space Structures Using Advanced Optimization Methods”, Shahid Bahonar University of Kerman, Kerman, Iran, March, 2012.

7. Mohsen Khatibinia, “Reliability – Based Design Optimization of Reinforced Concrete Structures Including Soil – Structure Interaction”, Shahid Bahonar University of Kerman, Kerman, Iran, January, 2013.

8. Seyyedsadegh Naseralavi, “Structural Damage Detection Using Numerical and Optimization Methods”, Shahid Bahonar University of Kerman, Kerman, Iran, January, 2013.

9. Reza Kamyab Moghaddas, “Optimization of Scallop Domes”, Shahid Bahonar University of Kerman, Kerman, Iran, January, 2013.

10. Nima Farhadi, “Under Preparation”, Shahid Bahonar University of Kerman, Kerman, Iran.

11. Ali Shahri, “Under Preparation”, Shahid Bahonar University of Kerman, Kerman, Iran.

12. Mahdi Nourmohammadiyan Tajabadi, “Under Preparation”, Shahid Bahonar University of Kerman, Kerman, Iran.

Doctor of Philosophy – Thesis – Advisor:

1. Seyyedmohammad Seyyedpour, “Shape Optimum Design of Arch Dams Using Advanced Optimization Methods”, Shahid Bahonar University of Kerman, Kerman, Iran, July, 2009.

2. Seyyedmahmoud Vaezinezhad, “Under Preparation”, Shahid Bahonar University of Kerman, Kerman, Iran.

3. Alireza Hajizadeh Mohammad Nasirkhani, “Under Preparation”, Shahid Bahonar University of Kerman, Kerman, Iran.

55

4. Davoud Hamidiyan, “Under Preparation”, Shahid Bahonar University of Kerman, Kerman, Iran.

5. Hamid Ghanbari Rabor, “Under Preparation”, Shahid Bahonar University of Kerman, Kerman, Iran.

Doctor of Philosophy – Thesis – Juror:

1. Alireza Barkateyn, “Topology Optimization of Continuous Plate Structures with Considering Geometric Nonlinear Behavior against Static and Dynamic Loads”, Isfahan University of Technology, Isfahan, Iran, June, 2009.

2. Ramin Tabatabaei Mirhoseini, “Nonlinear Analysis of Asymmetric Structures Subjected to Seismic Loads Based on Normal Flow Algorithm”, Shahid Bahonar University of Kerman, Kerman, Iran, August, 2009.

3. Siyamak Talat Ahari, “Extension and Hybridization of Meta – Heuristic Algorithms for Optimization of Large – Scale Structures”, University of Tabriz, Tabriz, Iran, January, 2011.

4. Hamidreza Ghaffarrian Jam, “On the Validity Assessment of the Evolutionary Structural Optimization Method”, Ferdowsi University of Mashhad, Mashhad, Iran, July, 2011.

Funded Research:

1. Title: Optimum Design of Structures.

Sponsor: Shahid Bahonar University of Kerman, Kerman, Iran.

Period: 1986-1990

2. Title: Optimum Design of Plate Girders.

Sponsor: Iranian Research and Scientific Organization, Tehran, Iran.

Period: 1987-1990

3. Title: Dynamics Analysis of Structures for Tabas Earthquake.

Sponsor: Iranian Research and Scientific Organization, Tehran, Iran.

56

Period: 1989-1990

4. Title: Optimum Design of Structures with Discrete Design Variables.

Sponsor: Shahid Bahonar University of Kerman, Kerman, Iran.

Period: 1992-1993

5. Title: Optimum Design of Structures with Discrete Design Variables.

Sponsor: Shahid Bahonar University of Kerman, Kerman, Iran.

Period: 1993-present

6. Title: Least Weight Design of Structures against Earthquake.

Sponsor: National Research Program.

Period: 1997-2001

7. Title: Optimum Design of Structures by Soft Computing.

Sponsor: National Research Program and Shahid Bahonar University of

Kerman, Kerman, Iran

Period: 2001-2002

8. Title: Optimum Design of Structures against Earthquake by Advanced

Optimization Techniques.

Sponsor: Research program between the Universities.

Period: 2002-2006

9. Title: Optimum Design of Structures.

57

Sponsor: Shahid Bahonar University of Kerman, Kerman, Iran.

Period: 2002-Present Topics of Research Interest:

1. Structural Optimization

2. Analysis and Design of Space Structures

3. Optimum Design of Structures Including Earthquake Resistant Design

4. Behavior of Steel and Reinforced Concrete Structures

5. Soft Computing (Genetic Algorithm, Simulated Annealing, Fuzzy Sets, Fuzzy Logic, Neural Networks, Wavelet Theory, Wavelet Networks, Curvelet Theory, etc.)

6. Damage Detection in Structures

7. Soil – Structure Interaction

8. Finite Element Methods

9. Earthquake Engineering

10. Retrofitting and Strengthening of Existing buildings Countries Presented Papers:

1. Iran (Shiraz, 1990 + Kerman, 1995 + Tehran, 1995, 1997, 1998, 1999, 2000 + Zahedan, 1999 + Mashhad, 2000).

2. United Kingdom (Guildford, 1984, 1993, 2002 + Edinburgh, 1998, Oxford, 1999).

3. United States of America (1985, 1991).

4. Australia (Sydney, 1993).

5. Greece (Athens, 1994).

6. Germany (Goslar, 1995).

7. Poland (Warsaw, 1995, Zakopane, 1997).

8. Bahrain (Manama, 1996).

58

9. Hungary (Budapest, 1996).

10. Hong Kong (1996).

11. Singapore (1997).

12. Italy (Rome, 1997, 2005).

13. France (Paris, 1998).

14. Belgium (Leuven, 2000).

15. China (Dalian, 2001).

16. The Netherlands (Holland)- (Egmond-aan-Zee, 2003).

17. Portugal (Lisbon, 2004, Maderia, 2009)

18. Spain (Las Palmas de Gran Canaria, 2006, Valencia, 2010).

19. South Korea (Seoul, 2007).

20. Malta (St. Julians, 2007).

21. Portugal (Madeira, 2009).

22. Croatia (Dubrovnik, 2012). Countries Visited for Educational Purposes:

1. Japan (1985, 1991)

2. Mexico (1991)

3. Syria (1992)

4. Malaysia (1993)

5. Switzerland (1994)

6. Austria (1996)

7. Saudi Arabia (1998)

8. The Netherlands (Holland) (2000)

9. Thailand (2001)

10. Spain (2004)

59

11. Turkey (2012)

12. Iraq (2012) Professional Qualifications:

1. Member of Editorial Board of International Journal of Engineering, Materials and Energy Research Center, Tehran, Iran.

2. Member of Editorial Board of Asian Journal of Civil Engineering, Building and Housing Research Center (BHRC), Tehran, Iran.

3. Member of Editorial Board of Journal of Engineering, Ferdowsi University of Mashhad, Mashhad, Iran.

4. Member of Editorial Board of International Journal of Optimization in Civil Engineering, The Academic Publication Council, Iran University of Science and Technology, Tehran, Iran.

5. Member of Editorial Board of Journal of Civil Engineering Sharif, Sharif University of Technology, Tehran, Iran.

6. Member of Editorial Board of Civil – Comp Conferences, Stirlingshire, Scotland.

7. Member of The International Society for Structural and Multidisciplinary Optimization.

8. Member of the New York Academy of Science, New York, United Stated of America.

9. Member of the Iranian Society of Civil Engineers, Iran.

10. Member of the Iranian Construction Engineering Organization Province of Kerman, Kerman, Iran.

11. Member of the Iranian Society of Earthquake Engineering, Iran.

12. Member of the Founders of the Kerman Journal of Science and Engineering, Kerman, Iran.

13. Member of The Academy of Sciences Islamic Republic of Iran, Tehran, Iran.

14. Member of Executive Committee of the Shahid Bahonar University of Kerman, Kerman, Iran.

15. Member of the Center of Excellence of Fundamental Studies in Civil Engineering and Building and Housing Research Center, Iran University of Science and Technology, Tehran, Iran.

16. Consultant to Many Civil Engineering Companies.

60

17. Reviewer for 40 Professional International Journals.

18. Chosen as Chair of Sessions for 50 International Conferences.

19. Chosen as Referee for Publication of 4 Books.

20. Chosen as External Examiner for about 80 M.Sc. Dissertation and 4 Ph.D. Thesis Examinations.

21. Chosen as the Member of Editorial Board of about 20 International Conferences.

22. Elected by the People of Kerman City with a Population of Half a Million as the Member of Second Kerman City Council with Highest Votes among 132 Candidates for the Years 2003-2007 and Elected as the Chair of the City Council.

23. Elected by the People of Kerman City as the Member of Third Kerman City Council with Thirty Thousand Votes for the Years 2007-2013 and Elected as Chair of the Engineering Committee.

24. Elected as the Head of City Councils of Kerman Province and Kerman State and Member of Higher Council of Iran Provinces, 2007-2013.

25. Head of The Reasearch Institute for Earthquake and Optimization, Shahid Bahonar University of Kerman, Kerman, Iran.

26. Member of the Review and Promotion Boards of Shahid Bahonar University of Kerman and University of Sistan and Baluchestan.

27. Member of Executive Boards of Valieasr Rafsanjan University and International Center for Science, High Technology and Environmental Sciences and Narjes Khatoon University.

28. Member of Executive Board of Kerman Graduate University of Advanced Technology.

29. Member of Final Referee Committee of Khwarazmi International Award.

30. Member of Technical Programming of Civil Engineering Committee of the Ministry of Science, Research and Technology, Iran.

31. Member of Engineering Committee of Higher Council of Iran Provinces.

32. Representative of the Higher Council of Iran Provinces in the Ministry of Housing and Urban Planning.

33. Founder and President of Fazaraz Consulting Engineering Co, Kerman, Iran, 2002.

34. Designed about 2000 Different Steel and Concrete Professional Projects up to 20 Stories for about One Million Squire Meters for Fazaraz Co. and a Total of Two Million Squire Meters over the Past 30 years.

61

35. Retrofitting and Strengthening of 100 Steel and Concrete Buildings from 6 Stories to 12 Stories with Areas of about 500000 Squire Meters for Fazaars Co.

36. In Charge of the Structural Rehabilitation of Imam Hussein Holy Shrine, Karbala, Iraq.

Honors and Awards:

1. Chosen as the “Distinguished Professor” of Shahid Bahonar University of Kerman in 1990 and was Presented an award by the Chancellor of the University.

2. Chosen as the “Distinguished Researcher” of Shahid Bahonar University of Kerman in 1995 and was Presented an award by the Chancellor of the University.

3. Chosen as the “Distinguished Researcher” of Iranian Society of Civil Engineers in 1996 and was Presented an award by the Minister of Housing and Planning.

4. Chosen as the “Distinguished Researcher” of the 2nd Scientific and Cultural Festival of Kerman Province in 1997 and was Presented an award by the Chancellor of Shahid Bahonar University of Kerman.

5. Chosen as the “Distinguished Researcher” of the 3rd Scientific and Cultural Festival of Kerman Province in 1998 and was Presented an award by the Governor of Kerman.

6. Chosen as the “Distinguished Professor” of the Universities of Iran by the Ministry of Science and Higher Education in 1998 and was Presented an award by the President of Iran.

7. Biographical Data Published in the 15th Edition of Marquis Who's Who in the World, United States of America, 1998.

8. Biographical Data Published in the 27th Edition of Dictionary of International Biography, IBC, Cambridge, England, 1999.

9. Chosen as the “Distinguished Professor” of Shahid Bahonar University of Kerman in 2001 and was Presented an award by the Minister of Science, Research and Technology.

10. Biographical Data Published in the Asian/American Who's Who, India, 2001.

11. Presented an award by the Chancellor of Shahid Bahonar University of Kerman and Vice Minister of Science, Research and Technology for Organizing a National Short Course on Space Structures, 2001.

12. Chosen as the “Distinguished Researcher” of Shahid Bahonar University of Kerman in 2001 and was Presented an award by the Chancellor of the University.

13. Chosen as the “Man of the Year 2001” by American Biographical Institute (ABI).

14. Winner of the Afzalipour Prize, an award was Presented by the Minister of Science, Research and Technology, Shahid Bahonar University of Kerman, Iran, 2005.

62

15. Biographical Data Published in the 2005 Edition of Who’s Who in Computational Science and Engineering, Saxe-Coburg Publications, United Kingdom, ISBN 1-874672-18-0, 2005.

16. Chosen as the “Distinguished Researcher” of the Scientific and Cultural Festival of Kerman Province in 2007 and was Presented an award by the Governor of Kerman, Iran.