radial press jointing press_2… · the installation and assembly instructions of the system...
TRANSCRIPT
RA
DIA
L P
RE
SS
RADIAL PRESS JOINTING
Radial Press Jointing
173
173
172
152
150
146
145
144
143
128
126
Cable shears
Cropping tongs
Hold-Harmless and Indemnification Agreement
Pressing tongs / pressing rings
Cordless radial presses
Electro-hydraulic radial presses
Electric radial press
Manual radial press
Cropping tongs Mini
Pressing tongs Mini
Cordless radial press Mini
126
with automatic circuit controland charging status check
REMS Mini-Press ACC Cordless radial press with automatic circuit control
German Quality ProductGerman Quality Product
Universal, super handy electric tool with automatic circuit control for producing pipe pressing joints for all common pressfi tting systems. For battery and corded operation.Pipe pressing joints Ø 10 – 40 mm 7 Ø ⅜ – 1 ¼Complete range of REMS pressing tongs Mini for all common pressfi tting systems, see page 128 – 142.
REMS Mini-Press ACC – universal up to Ø 40 mm.Super light, super small, super handy. With automatic circuit control. Secure crimping inseconds. Automatic locking of the pressing tongs. Pressing tongs for all common systemsComplete assortment of REMS pressing tongs Mini for all common pressfi tting systems (page 128 – 142). Highly durable pressing tongs made of forged, tenacious, specially hardened special steel. Pressing contours of REMS pressing tongs are system-specifi c and correspond to the respective pressfi tting system. Thus perfect system-conformity, safe press jointing. Very compact design and low weight of the REMS Mini pressing tongs due to special arrangement of the pressing tongs connection (Patent EP 1 952 948). Recesses in the pressing jaws for safe guidance of the connecting plate foroffset-free pressing (Patent EP 2 347 862).DesignSuper light, super small, super handy. Drive unit with battery only 2.4 kg. Drive unitwith pressing tongs V 22 only 33 cm long. Works anywhere, free-hand, overhead, also in particularly tight areas. Optimum weight distribution for single-hand oper-ation. Ergonomically designed housing. Integrated LED work light for illuminating the work place. Swivelling pressing tongs seat. Secure seating of pressing tongs by automatic locking. For battery and corded operation. Electronic charging status check with fl at battery protection and charging status indicator with 2-coloured LED.
Pressing operation by touch-control with ACCFor reliable service, operating and functional safety. Automatic retraction after completion of pressing operation (automatic circuit control).
DriveEnormous thrust and pressing force for fast and perfect press jointing. Powerful electro-hydraulic drive with powerful battery motor 14,4 V, 380 W output, robust planetary gear, eccentric reciprocating pump and compact high power hydraulic system. Safety tip switch.
Battery or mains operationLi-Ion PLUS technology. Highly resistant Li-Ion 14.4 V battery with 1.5 or 3.0 Ah capacity for long service life. Powerful and light. Li-Ion 14.4 V, 3.0 Ah battery for approx. 330 pressings Viega Profi press DN 15 per battery charge. Total discharge and overload protection with single cell monitoring. Temperature monitoring during the charging process. Operating temperature range –10 to +60 °C. No memory effect for maximum battery power. Rapid charger for short charging times. Li-Ion 230 V/14.4 V voltage supply for mains operation 230 V instead of Li-Ion battery 14.4 V, as accessory.
Supply formatREMS Mini-Press ACC Basic-Pack. Cordless radial press with automatic circuit control for producing pipe pressing joints Ø 10–40 mm, Ø ⅜ – 1 ¼". For operating with REMS pressing tongs Mini. Swivelling pressing tongs seat with automatic locking. Electro-hydraulic drive with powerful battery motor 14,4 V, 380 W, obust planetary gear, eccentric reciprocating pump and compact high power hydraulic system, Safety tip switch. Integrated LED work light. Battery Li-Ion 14,4 V, 1.5 Ah, rapid charger Li-Ion/Ni-Cd 230 V or 110 V, 50 – 60 Hz, 65 W. In sturdy steel case.
Art.-No.578012 R220
Other voltages on request.
AccessoriesAccessories
Description Art.-No.REMS pressing tongs Mini/pressing rings see page 128 – 142.REMS cropping tongs Mini for threaded rods see page 143.REMS Mini-Press ACC drive unit, without battery 578001 R14
Battery Li-Ion 14.4 V, 1.5 Ah 571545 R14
Battery Li-Ion 14.4 V, 3.0 Ah 571555 R14
Rapid charger Li-Ion/Ni-Cd 230 V, 50 – 60 Hz, 65 W 571560 R220
Voltage supply Li-Ion 230 V/14.4 V for mains operation 230 V instead of battery Li-Ion 14.4 V. 571565 R220
Steel case with inlay 578290 R
REMS cordless LED lamp see page 95 175200 R
Patent EP 1 952 948Patent EP 2 347 862
< 33 cm (V 22)
31 cm (V 15)
127
REMS Mini-Press 22 V ACC Cordless radial press with automatic circuit control
Universal, super handy electric tool with automatic circuit control for producing pipe pressing joints for all common pressfi tting systems. Li-Ion 22 V Technology. For battery and corded operation.Pipe pressing joints Ø 10 – 40 mm / Ø ⅜ – 1 ¼"Complete range of REMS pressing tongs Mini for all common pressfi tting systems, see page 128 – 142.
REMS Mini-Press 22 V ACC – universal up to Ø 40 mm.Super light, super small, super handy, ultra fast. Pressing under 4 s. Automatic pressing process. With automatic circuit control. Li-Ion 22 V Technology for 50 % more pressings 2).Pressing tongs for all common systemsComplete assortment of REMS pressing tongs Mini for all common pressfi tting systems (page 128 – 142). Highly durable pressing tongs made of forged, tenacious, specially hardened special steel. Pressing contours of REMS pressing tongs are system-specifi c and correspond to the respective pressfi tting system. Thus perfect system-conformity, safe press jointing. Very compact design and low weight of the REMS Mini pressing tongs due to special arrangement of the pressing tongs connection (Patent EP 1 952 948). Recesses in the pressing jaws for safe guidance of the connecting plate for offset-free pressing (Patent EP 2 347 862).DesignSuper light, super small, super handy. Drive unit with battery only 2.5 kg. Drive unit with pressing tongs V 15 only 31 cm long. Works anywhere, free-hand, overhead, also in particularly tight areas. Optimum weight distribution for single-hand operation. Drive unit with inserted pressing tongs can be put down on the battery ready to pick up. Ergonomically designed housing with soft grip. Integrated LED work light for illuminating the work place. Swivelling pressing tongs seat, rotation angle > 360 °. Secure seating of pressing tongs by automatic locking. For battery and corded operation. Electronic charging status check with fl at battery protection and charging status indicator with 2-coloured LED.
Pressing operation with ACCFor reliable service, operating and functional safety. Automatic retraction after completion of pressing operation (automatic circuit control). Ultra fast Pressing under 4 s.
DriveEnormous thrust and pressing force for fast and perfect press jointing. Powerful electro-hydraulic drive with powerful battery motor 21.6 V, 380 W output, robust planetary gear, eccentric reciprocating pump and compact high power hydraulic system. Safety tip switch.
Battery or mains operationLi-Ion 22 V Technology. Highly resistant Li-Ion 21.6 V batteries with 1.5 or 2.5 Ah capacity for long service life. Powerful and light. Li-Ion 21.6 V batteries for 50 % more pressings2) than Li-Ion 14.4 V batteries. Li-Ion 21.6 V, 1.5 Ah batteries for approx. 250 pressings Viega Profi press DN 15 per battery charge. Li-Ion 21.6 V, 2.5 Ah battery for approx. 390 pressings Viega Profi press DN 15 per battery charge. Graduated charging state display with coloured LED. Total discharge and overload protection with single cell monitoring. Temperature monitoring during the charging process. Operating temperature range –10 to +60 °C. No memory effect for maximum battery power. Rapid charger for short charging times. Li-Ion 230 V/21.6 V voltage supply for mains operation 230 V instead of Li-Ion battery 21.6 V, as accessory.
Scope of SupplyREMS Mini-Press 22 V ACC Basic-Pack. Cordless radial press with automatic circuit control for producing pipe pressing joints Ø 10–40 mm, Ø ⅜ – 1 ¼". For operating with REMS pressing tongs Mini. Swivelling pressing tongs seat with automatic locking. Electro-hydraulic drive with powerful battery motor 21.6 V, 380 W, obust planetary gear, eccentric reciprocating pump and compact high power hydraulic system. Safety tip switch. Integrated LED work light. Battery Li-Ion 21.6 V, 1.5 Ah, rapid charger Li-Ion 230 V or 110 V, 50 – 60 Hz, 70 W. In sturdy steel case.
Art.-No.578010 R220
Other voltages on request.
AccessoriesAccessories
Description Art.-No.REMS pressing tongs Mini/pressing rings see page 128 – 142.REMS cropping tongs Mini for threaded rods see page 143.REMS Mini-Press 22 V ACC drive unit, without battery 578002 R22
Battery Li-Ion 21.6 V, 1.5 Ah 571570 R22
Battery Li-Ion 21.6 V, 2.5 Ah 571571 R22
Rapid charger Li-Ion 230 V, 50 – 60 Hz, 70 W 571575 R220
Voltage supply Li-Ion 230 V/21.6 V for mains operation 230 V instead of battery Li-Ion 21.6 V. 571567 R220
Steel case with inlay 578290 R
with automatic circuit controland charging status check
German Quality ProductGerman Quality Product
Patent EP 1 952 948Patent EP 2 347 862
128
REMS pressing tongs MiniREMS pressing rings
Accessories for REMS Mini-Press ACC and REMS Mini-Press 22 V ACC
ZVSHK
for all common pressfi tting systems
Select REMS pressing tongs Mini/ REMS pressing rings yourself!Find the desired press fi tting system in the table below and choose the size of pressing tongs/pressing rings that you require. Please note that pressfi tting systems for gas installation may only be pressed with the REMS pressing tongs Mini/pressing rings which are highlighted in yellow in the table. Adapter tongs (page 142) are necessary for driving the REMS pressing rings (PR).Highly durable pressing tongs/pressing rings made of tenacious, specially hard-ened special steel. Pressing contours of REMS pressing tongs/pressing rings are system-specifi c and correspond with the respective pressfi tting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs/pressing rings manu factured on CNC production centres ensure high-precision machining of pressing contour. Low production tolerances as a result.Driven by REMS Mini-Press ACC and REMS Mini-Press 22 V ACC. Read and follow the installation and assembly instructions of the system provider/manufacturer.
REMS pressing tongs MiniREMS Mini pressing tongs with 2 swivellable monoblock pressing jaws. Very compact design and low weight of the REMS Mini pressing tongs due to special arrangement of the pressing tongs connection (Patent EP 1 952 948). Recesses in the pressing jaws for safe guidance of the connecting plate for offset-free pressing (Patent EP 2 347 862).REMS Mini ACz, Fz, HEz, RFz, RFIz pressing tongs with teeth prevent formation of burr on the pressing sleeve (Patent EP 2 027 971).
REMS pressing ring 45° (PR-2B) REMS pressing ring 45° (PR-2B), with 2 pressing jaws, for secure engagement of the pressing jaws in places of diffi cult access by 45° inclination (Patent EP 2 774 725). Drive with adapter tongs.
Traceability according to EN 1775:2007REMS pressing tongs Mini with pressing contour F, M, V, SA, B, RN and UP have worked a specifi c marking into the pressing contour which leaves a lasting impression on the pressed fi tting after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfi t connection even after the pressing process. With this traceability REMS fulfi ls the recommendations of the European standard EN 1775:2007 for the installation of pressfi tting systems for gas.
Hold-Harmless and Indemnifi cation AgreementSee page 172.
Confi rmation of suitability See page 171.
Patent EP 1 952 948Patent EP 2 347 862
REMS Mini pressing tongs REMS pressing ring 45° (PR-2B)Patent EP 2 774 725
German Quality ProductGerman Quality Product
129
REMS pressing tongs MiniREMS pressing rings
Accessories for REMS Mini-Press ACC and REMS Mini-Press 22 V ACC
Pressing tongs with teethPatent EP 2 027 971
Example REMS pressing tongs Mini V: ”V” imprint on pressed fi tting for traceability according to EN 1775:2007
ACz
H
MT
TH
VAU
VX
F
KHEz
RFz
UP
VP
G
M
SA
V
VUS
B
HA
PF
THL
VG
C
HE
RFIz
U
VIC
Fz
KI
RN
US
VRX
130
Accessories for REMS Mini-Press ACC and REMS Mini-Press 22 V ACC
System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.AC-FIX PRESS H 12 578396(Global Piping H 16 578400Systems) H 20 578406
H 25 578408H 32 578412RFz 12 578490RFz 16 578492RFz 20 578494RFz 25 578496RFz 32 578498U 16 578374U 20 578378U 25 578380U 32 578382VX 16 578552VX 20 578554
AC-FIX H 16 578400PRESS-MULTI H 18 578404(Global Piping H 20 578406Systems) H 25 578408
H 32 578412RFz 16 578492RFz 20 578494RFz 25 578496RFz 32 578498U 16 578374U 18 578376U 20 578378U 25 578380U 32 578382
ACOME MT ACz 12 578608ACz 16 578610ACz 20 578612ACz 25 578614
AHLSELL M 12 578310A-press M 15 578312elförzinkad M 18 578314
M 22 578316M 28 578318M 35 578390M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
AHLSELL V 12 578324A-press koppar V 15 578328
V 18 578332V 22 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
AHLSELL M 15 578312A-press rostfritt M 18 578314
M 22 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
AIRBEL M 15 578312PRESSCLIM M 18 578314
M 22 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
AIRBEL M 15 578312SERTINOX M 18 578314
M 22 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
ALB TH 16 578352Sistema Multicapa TH 18 578356
TH 20 578358TH 26 578362TH 32 578364TH 40 578624H 16 578400H 18 578404H 20 578406H 26 578410H 32 578412U 16 578374U 18 578376U 20 578378C 26 578392U 32 578382U 40 578386
APE Serie AP B 16 578468B 20 578472B 26 578474B 32 578476H 16 578400H 20 578406H 26 578410H 32 578412TH 16 578352TH 18 578356TH 20 578358TH 26 578362TH 32 578364U 16 578374U 20 578378U 40 578386
APE Serie AP TH 16 578352Gas TH 20 578358
TH 26 578362TH 32 578364
AQUATECHNIK B 16 578468Universal B 20 578472
B 26 578474B 32 578476F 16 578456F 20 578460F 26 578462F 32 578464H 16 578400H 20 578406H 26 578410H 32 578412TH 16 578352TH 20 578358TH 26 578362TH 32 578364U 16 578374U 20 578378C 26 578392U 32 578382
ASCHL NIR M 15 578312M 18 578314M 22 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
ASTM F 1807 US ⅜" 578534(Fittings with US ½" 578536Copper Crimp US ¾" 578538Ring for PEX US 1" 578540tubing)tubing)Bampi BALPEX TH 16 578352(serie MP) TH 18 578356
TH 20 578358TH 26 578362TH 32 578364TH 40 578624
Bampi BALPEX TH 16 578352Gas TH 20 578358
TH 26 578362BARBI H 12 578396EASYPRESS H 16 578400(Industrial Blansol) H 20 578406
H 25 578408H 32 578412RFz 12 578490RFz 16 578492RFz 20 578494RFz 25 578496RFz 32 578498U 16 578374U 20 578378U 25 578380U 32 578382
BARBI H 14 578398MULTIPEX H 16 578400(Industrial Blansol) H 18 578404
H 20 578406H 25 578408H 26 578410H 32 578412RFz 16 578492RFz 18 578638RFz 20 578494RFz 25 578496RFz 32 578498TH 16 578352TH 20 578358TH 26 578362TH 32 578364U 16 578374U 18 578376U 20 578378U 25 578380U 32 578382U 40 578386
BEGETUBE/ B 14 578466IVAR B 16 578468
B 18 578470B 20 578472B 26 578474B 32 578476
BRASELI TH 16 578352GPF GAS TH 20 578358
TH 25 578360TH 32 578364
BRASELI RFz 16 578492Pressfi tting PE-X RFz 20 578494
RFz 25 578496RFz 32 578498
BRASELI U 16 578374Pressfi tting U 18 578376Multicapa U 20 578378
U 25 578380U 32 578382U 40 578386
Brass Form H 16 578400Master Press H 18 578404
H 20 578406TH 16 578352TH 18 578356TH 20 578358U 16 578374U 18 578376U 20 578378
Brass & Fittings RFz 16 578492Pressman RFz 18 578638Multicapa ACz 20 578612
RFz 25 578496RFz 32 578498
Brass & Fittings RFz 16 578492Retipress RFz 18 578638
ACz 20 578612RFz 25 578496RFz 32 578498
BRASSTECH H 16 578400MULTItermoSAN H 18 578404Brasspress H 20 578406
H 26 578410TH 16 578352TH 18 578356TH 20 578358TH 26 578362TH 32 578364TH 40 578624U 16 578374U 18 578376U 20 578378
Business Key M 15 578312MT-PRESS M 18 578314(inox) M 22 578316
M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
Cello Products VUS ½" (OD 15,9 mm) 578566<B>Press VUS ¾" (OD 22,2 mm) 578568
VUS 1" (OD 28,6 mm) 578570VUS 1¼" (OD 34,9 mm) 578606
CHIALI TH 16 578352CHIALIPEX TH 20 578358
TH 26 578362TH 32 578364TH 40 578624
Climatek TH 14 578348Clima Therm TH 16 578352
TH 18 578356TH 20 578358TH 26 578362TH 32 578364
Climatrix H 16 578400Climatrix Rhinopex H 20 578406
U 16 578374U 20 578378TH 14 578348TH 16 578352TH 18 578356TH 20 578358TH 26 578362TH 32 578364
ClouSet TH 16 578352TH 18 578356TH 20 578358
COMAP V 12 578324SudoPress Carbon V 15 578328
V 18 578332V 22 578334V 28 578336V 35 578604
Comap V 12 578324SudoPress Copper V 14 578326
V 15 578328V 16 578330V 18 578332V 22 578334V 28 578336V 35 578604
Comap Comap V 12 578324SudoPress V 14 578326Copper Gas V 15 578328
V 16 578330V 18 578332V 22 578334V 28 578336V 35 578604
REMS pressing tongs MiniREMS pressing rings
131
Accessories for REMS Mini-Press ACC and REMS Mini-Press 22 V ACC
System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.COMAP V 14 578326SudoPress V 15 578328Copper Solar V 16 578330
V 18 578332V 22 578334
COMAP V 15 578328SudoPress V 18 578332Stainless V 22 578334
V 28 578336V 35 578604
Comap RFz 12 578490PexPress RFz 16 578492
RFz 20 578494RFz 25 578496
Comap TH 14 578348SkinPress TH 16 578352
TH 18 578356TH 20 578358TH 26 578362THL 32 578368TH 40 578624
Comap TH 16 578352SkinPress Gas TH 20 578358
TH 26 578362THL 32 578368
Comap TH 16 578352SkinPress PPSU TH 20 578358
TH 26 578362THL 32 578368
COMAP M 12 578310Xpress Carbon M 15 578312
M 181) 578314M 22 578316M 281) 578318M 35 578390M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
COMAP M 12 578310Xpress Copper M 15 578312
M 181) 578314M 22 578316M 281) 578318M 35 578390M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
COMAP M 15 578312Xpress Copper M 181) 578314Gas M 22 578316
M 281) 578318M 35 578390
COMAP M 15 578312Xpress Stainless M 181) 578314
M 22 578316M 281) 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
COMISA TH 14 578348Press System TH 16 578352
TH 18 578356TH 20 578358TH 25 578360TH 26 578362TH 32 578364TH 40 578624H 14 578398H 16 578400H 18 578404H 20 578406H 26 578410H 32 578412B 14 578466B 16 578468B 18 578470B 20 578472B 26 578474B 32 578476
COMISA TH 16 578352Press System Gas TH 20 578358
TH 26 578362TH 32 578364
CONEL F 16 578456CONNECT F 20 578460MULTI F 26 578462
F 32 578464H 16 578400H 20 578406H 26 578410H 32 578412TH 16 578352TH 20 578358TH 26 578362TH 32 578364U 16 578374U 20 578378
(DN 26) U 25 578380U 32 578382VP 16 578482VP 20 578484VP 32 578488
DIWAsystems TH 14 578348TH 16 578352TH 20 578358TH 26 578362TH 32 578364TH 40 578624
DUOFIL U 16 578374MKSYSTEM U 18 578376
U 20 578378U 25 578380U 32 578382
DW Verbundrohr U 16 578374multitubo systems U 18 578376
U 20 578378U 25 578380U 32 578382
EBRILLE U 16 578374Isomonfl ex U 18 578376
U 20 578378U 25 578380H 26 578410TH 26 578362U 32 578382
EBRILLE U 14 578372Monfl ex U 16 578374
U 18 578376U 20 578378U 25 578380H 26 578410TH 26 578362U 32 578382U 40 578386
EFFEBI M 15 578312PRESSTIGE M 18 578314
M 22 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
V 15 578328V 18 578332V 22 578334V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
EFFEBI TOF TH 16 578352MULTIPINZA TH 18 578356
TH 20 578358TH 26 578362TH 32 578364TH 40 578624F 16 578456F 18 578458F 20 578460F 26 578462F 32 578464H 16 578400H 18 578404H 20 578406H 26 578410H 32 578412U 16 578374U 18 578376U 20 578378U 25 578380C 26 578392U 32 578382U 40 578386B 16 578468B 18 578470B 20 578472B 26 578474B 32 578476
Elkhart VUS ½" (OD 15,9 mm) 578566APOLLOXPRESS VUS ¾" (OD 22,2 mm) 578568Fittings Copper VUS 1" (OD 28,6 mm) 578570and Low-Lead VUS 1¼" (OD 34,9 mm) 578606BrassEMMETI B 16 578468GERPEX- B 20 578472FIVPRESS B 26 578474
B 32 578476F 16 578456F 20 578460H 16 578400H 20 578406TH 16 578352TH 20 578358TH 26 578362TH 32 578364TH 40 578624U 16 578374U 20 578378
EMPUR TH 15 578350TH 17 578354TH 20 578358
EURACCORDI M 15 578312SYCPRESS M 18 578314STAINLESS M 22 578316STEEL PRESS M 28 578318FITTINGS M 35 578390
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
EURACCORDI M 15 578312SYCPRESS M 18 578314CARBON STEEL M 22 578316PRESS FITTINGS M 28 578318
M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
EUROTUBI M 12 578310Europa C-STAHL M 15 578312PRESSFITTING M 18 578314SISTEM1) M 22 578316
M 28 578318M 35 578390M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
EUROTUBI M 15 578312Europa INOX M 18 578314PRESSFITTING M 22 578316SISTEM1) M 28 578318
M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
Pressfi tting systems for gas installations must only be pressed with REMS pressing tongs Mini/pressing rings which are highlighted in yellow. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) For taking suitable pressing inserts.3) Adapter tongs are required for driving pressing rings (PR), see page 142.The suitability of REMS pressing tools for pressfi tting systems: Date 14.10.2016. For the updated situation regarding suitability status check our website: www.rems.de → Downloads → Product catalogues, brochures → REMS Catalogue.Pressing tongs for additional pressfi tting systems on request.
REMS pressing tongs MiniREMS pressing rings
132
Accessories for REMS Mini-Press ACC and REMS Mini-Press 22 V ACC
System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.Evans VAU 15 (½") 578630Components VAU 20 (¾") 578632Presslok VAU 25 (1")VAU 25 (1") 578634FAR Rubinetterie TH 14 578348PRESSFAR TH 16 578352
TH 17 578354TH 18 578356TH 20 578358TH 25 578360TH 26 578362TH 32 578364TH 40 578624H 14 578398H 16 578400H 18 578404H 20 578406H 26 578410H 32 578412U 14 578372U 16 578374U 18 578376U 20 578378U 25 578380U 32 578382U 40 578386
F.B.Q. BARONIO V 12 578324BQ press V 14 578326
V 15 578328V 16 578330V 18 578332V 22 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R
V 14 45° (PR-2B)3) 574532 R
V 15 45° (PR-2B)3) 574504 R
V 16 45° (PR-2B)3) 574534 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
F.B.Q. BARONIO V 15 578328BQ press V 18 578332carbon steel V 22 578334
V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
F.B.Q. BARONIO V 15 578328BQ press gas V 18 578332
V 22 578334V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
Fercofl oor RFz 16 578492DUO Press RFz 20 578494FERCO PEX RFz 25 578496
RFz 32 578498TH 16 578352TH 20 578358TH 25 578360TH 32 578364
Fercofl oor RFz 16 578492DUO Press RFz 20 578494MULTIFER RFz 25 578496
RFz 32 578498U 16 578374TH 16 578352TH 20 578358TH 25 578360TH 32 578364U 18 578376U 20 578378U 25 578380U 32 578382
FILINOX M 15 578312Instalpress M 18 578314Steel M 22 578316
M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
FILINOX M 15 578312Instalpress M 18 578314Inox M 22 578316
M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
Fittings Estándar RFz 16 578492ECO-PRESS RFz 20 578494
RFz 25 578496RFz 32 578498
Fittings Estándar RFz 16 578492MULTICAPA RFz 18 578638
RFz 20 578494RFz 25 578496RFz 32 578498
Fittings Estándar RFz 16 578492PE-X RFz 20 578494
RFz 25 578496RFz 32 578498
FOHS TH 16 578352HEIZTECHNIK TH 20 578358FOHSPRESS TH 26 578362
TH 32 578364FORNARA B 16 578468ForPress B 20 578472
B 26 578474B 32 578476F 16 578456F 20 578460F 26 578462F 32 578464H 16 578400H 20 578406H 26 578410H 32 578412TH 16 578352TH 20 578358TH 26 578362TH 32 578364U 16 578374U 20 578378U 32 578382
FRABO V 12 578324CHROMEPRESS V 15 578328
V 18 578332V 22 578334V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
FRABO V 12 578324FRABOPRESS V 15 578328C-STEEL V 18 578332Securfrabo V 22 578334
V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
FRABO V 15 578328FRABOPRESS V 18 578332C-STEEL GAS V 22 578334
V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
FRABO V 12 578324FRABOPRESS V 15 578328INOX 316 V 18 578332
V 22 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
FRABO V 15 578328FRABOPRESS V 18 578332INOX 316 GAS V 22 578334
V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
FRABO H 16 578400FRABOPRESS H 20 578406MULTI-BRASS TH 16 578352(MB) TH 20 578358
TH 26 578362TH 32 578364U 16 578374U 20 578378
FRABO H 16 578400FRABOPRESS H 20 578406MULTI-PLUS H 26 578410(MP) U 16 578374
U 20 578378C 26 578392
FRABO V 22 578334FRABOPRESS V 28 578336NEXT V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
FRABO V 12 578324FRABOPRESS V 15 578328RAME (Cu) V 18 578332
V 22 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
FRABO V 12 578324FRABOPRESS V 15 578328RAME (Cu) V 18 578332
V 22 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
FRABO V 15 578328SOLARPRESS V 18 578332
V 22 578334V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
FRABO FRABO M 22 578316TS PRESS M 22 45° (PR-2B)3) 574526 R
V 22 578334V 22 45° (PR-2B)3) 574508 R
Fränkische B 16 578468alpex-duo B 18 578470
B 20 578472B 26 578474B 32 578476F 16 578456F 18 578458F 20 578460F 26 578462F 32 578464TH 16 578352TH 18 578356TH 20 578358TH 26 578362TH 32 578364
Fränkische F 16 578456alpex F50 PROFI F 20 578460
F 26 578462F 32 578464H 16 578400H 20 578406H 26 578410H 32 578412TH 16 578352TH 20 578358TH 26 578362TH 32 578364U 16 578374U 20 578378
(DN 26) U 25 578380U 32 578382VP 16 578482VP 20 578484VP 32 578488
REMS pressing tongs MiniREMS pressing rings
133
Accessories for REMS Mini-Press ACC and REMS Mini-Press 22 V ACC
System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.Fränkische F 20 578460alpex-gas F 26 578462
F 32 578464Fränkische Fz 40 578478alpex Lgabotherm H+S TH 10 578342
TH 12 578346TH 14 578348TH 15 578350TH 16 578352TH 17 578354TH 18 578356TH 20 578358TH 25 578360TH 26 578362TH 32 578364TH 40 578624
Geberit Mapress M 12 578310C-STAHL M 15 578312
M 18 578314M 22 578316M 28 578318M 35 578390M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
Geberit Mapress M 12 578310EDELSTAHL M 15 578312
M 18 578314M 22 578316M 28 578318M 35 578390M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
Geberit Mapress M 15 578312EDELSTAHL Gas M 18 578314
M 22 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
Geberit Mapress M 12 578310KUPFER M 15 578312
M 18 578314M 22 578316M 28 578318M 35 578390M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
Geberit Mapress M 15 578312KUPFER Gas M 18 578314
M 22 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
Geberit Mepla G 16 578444G 20 578446G 26 578448G 32 578450G 40 578452
Geberit Mepla G 16 578444Therm G 20 578446
G 26 578448
General Fittings B 16 578468Serie 5S00 B 18 578470
B 20 578472B 26 578474B 32 578476F 16 578456F 20 578460F 26 578462H 16 578400H 18 578404H 20 578406H 25 578408H 26 578410H 32 578412TH 16 578352TH 18 578356TH 20 578358TH 25 578360TH 26 578362TH 32 578364TH 40 578624U 16 578374U 18 578376U 20 578378U 25 578380U 32 578382U 40 578386
General Fittings B 16 578468Trident B 20 578472
B 26 578474B 32 578476F 16 578456F 20 578460F 26 578462H 16 578400H 20 578406H 26 578410H 32 578412TH 16 578352TH 20 578358TH 26 578362TH 32 578364U 16 578374U 20 578378U 32 578382
General Fittings H 16 578400Trident Gas H 20 578406
H 26 578410H 32 578412TH 16 578352TH 20 578358TH 26 578362TH 32 578364U 16 578374U 20 578378U 32 578382
Giacomini H 16 578400Raccordi RM H 20 578406Giacomini H 26 578410
H 32 578412TH 16 578352TH 20 578358TH 26 578362TH 32 578364THL 32 578368U 16 578374U 20 578378U 32 578382U 40 578386
Giacomini H 16 578400RM MULTIGAS H 20 578406
H 26 578410H 32 578412TH 16 578352TH 20 578358TH 26 578362TH 32 578364THL 32 578368U 16 578374U 20 578378U 32 578382
Giacomini V 15 578328Valvole Giacomini V 18 578332serie R850V V 22 578334
V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
SA 15 578514SA 18 578518SA 22 578520SA 28 578522M 15 578312M 18 578314M 22 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
Golan Pipe U 16 578374Systems U 20 578378(Scandinavia) U 25 578380Alu-Pres U 32 578382
U 40 578386Grinnell G-PRESS VUS ½" (OD 15,9 mm) 578566Copper Fittings VUS ¾" (OD 22,2 mm) 578568
VUS 1" (OD 28,6 mm) 578570VUS 1¼" (OD 34,9 mm) 578606
GS TH 14 578348Wärmesysteme TH 16 578352System TH TH 20 578358
TH 26 578362TH 32 578364TH 40 578624
GS V 15 578328Wärmesysteme V 18 578332System V V 22 578334
V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
GSP Group U 16 578374USMetrix U 20 578378HAGOS TH 16 578352HakaGerodur TH 10 578342HakaGerodur- TH 11,6 578344System TH 12 578346
TH 14 578348TH 16 578352TH 17 578354TH 18 578356TH 20 578358
HakaGerodur TH 16 578352HAKASAN TH 20 578358
TH 25 578360TH 26 578362TH 32 578364TH 40 578624
Harden 2000 TH 16 578352B-Hidro TH 20 578358
TH 26 578362Harden 2000 TH 14 578348Poly-Pex 2000 TH 16 578352
TH 17 578354TH 18 578356TH 20 578358TH 26 578362THL 32 578368TH 40 578624
Harden 2000 TH 16 578352Poly-Pex Gas TH 20 578358
TH 26 578362THL 32 578368
HASTINIK M 15 578312Hastinik/Hitpress M 18 578314
M 22 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
Pressfi tting systems for gas installations must only be pressed with REMS pressing tongs Mini/pressing rings which are highlighted in yellow. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) For taking suitable pressing inserts.3) Adapter tongs are required for driving pressing rings (PR), see page 142.The suitability of REMS pressing tools for pressfi tting systems: Date 14.10.2016. For the updated situation regarding suitability status check our website: www.rems.de → Downloads → Product catalogues, brochures → REMS Catalogue.Pressing tongs for additional pressfi tting systems on request.
REMS pressing tongs MiniREMS pressing rings
134
Accessories for REMS Mini-Press ACC and REMS Mini-Press 22 V ACC
System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.heima-press TH 16 578352
TH 20 578358TH 26 578362TH 32 578364TH 40 578624
HELIROMA U 16 578374klimapress U 18 578376
U 20 578378U 25 578380U 32 578382U 40 578386
HELIROMA RFz 16 578492romapress RFz 20 578494
RFz 25 578496RFz 32 578498
Henco TH 14 578348TH 16 578352TH 18 578356TH 20 578358TH 26 578362HE 32 578370HEz 40 578532
Henco Gas TH 16 578352TH 20 578358TH 26 578362
Herotec H 16 578400TEMPUS-PRESS H 20 578406PLUS H 25 578408
H 32 578412RFz 16 578492RFz 20 578494RFz 25 578496RFz 32 578498TH 16 578352TH 20 578358TH 25 578360TH 32 578364U 16 578374U 20 578378U 25 578380U 32 578382U 40 578386
Herz pipefi x TH 10 578342TH 16 578352TH 20 578358TH 26 578362TH 32 578364TH 40 578624
HITEC Sistema TH 14 578348Multistrato TH 16 578352
TH 18 578356TH 20 578358TH 26 578362TH 32 578364TH 40 578624
Hopewell M 15 578312press fi t system M 18 578314
M 22 578316M 28 578318M 35 578390
hp-praski TH 10 578342BAVARIA-press TH 14 578348
TH 16 578352TH 20 578358TH 26 578362TH 32 578364TH 40 578624
IBP >B< Flex U 16 578374U 18 578376U 20 578378U 25 578380U 32 578382
IBP >B< Press V 12 578324V 14 578326V 15 578328V 16 578330V 18 578332V 22 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R
V 14 45° (PR-2B)3) 574532 R
V 15 45° (PR-2B)3) 574504 R
V 16 45° (PR-2B)3) 574534 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
IBP >B< Press V 12 578324Carbon V 15 578328
V 18 578332V 22 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
IBP >B< Press V 15 578328Gas V 18 578332
V 22 578334V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
IBP >B< Press V 15 578328Inox V 18 578332
V 22 578334V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
IBP >B< Press V 15 578328Solar V 18 578332
V 22 578334V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
ICMA H 16 578400Sempiter H 20 578406
H 26 578410H 32 578412TH 16 578352TH 20 578358TH 26 578362TH 32 578364TH 40 578624U 16 578374U 20 578378U 32 578382U 40 578386
ICMA TH 16 578352Sempigas TH 20 578358
TH 26 578362TH 32 578364
Idrosanitaria TH 16 578352Bonomi TH 20 578358Homegas TH 26 578362Idrosanitaria TH 16 578352Bonomi TH 18 578356Idropress TH 20 578358
TH 26 578362TH 32 578364TH 40 578624
IDROSISTEMI TH 16 578352Ta-Press TH 20 578358
TH 26 578362TH 32 578364TH 40 578624F 16 578456F 20 578460F 26 578462F 32 578464Fz 40 578478H 16 578400H 20 578406H 26 578410H 32 578412U 16 578374U 20 578378C 26 578392U 32 578382U 40 578386B 16 578468B 20 578472B 26 578474B 32 578476
ILTA M 12 578310INOX/CHIBRO M 15 578312Pressfi tting Cuni M 18 578314
M 22 578316M 28 578318M 35 578390M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
ILTA M 15 578312INOX/CHIBRO M 18 578314Pressfi tting inox M 22 578316
M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
IPA IPANA Press TH 10 578342TH 11,6 578344TH 12 578346TH 14 578348TH 15 578350TH 16 578352TH 17 578354TH 18 578356TH 20 578358TH 22 578588TH 25 578360TH 26 578362TH 28 578590TH 32 578364TH 40 578624
IPA THu TH 16 578352IPANA Press TH 20 578358
TH 26 578362TH 32 578364TH 40 578624U 16 578374U 20 578378H 16 578400H 20 578406H 26 578410H 32 578412
IPALPEX TH 14 578348(Industrie du TH 16 578352Plastique et TH 18 578356Accessoires) TH 20 578358
TH 26 578362THL 32 578368TH 40 578624
IPLEX K16/P18 578592PIPELINESAUSTRALIAIplex Pro-fi tIplex Pro-fi tIPLEX K16/P18 578592PIPELINES K/20 578594AUSTRALIA K/25 578596Iplex K1 K32 578598(Gas)(Gas) K1/40 578600IPLEX K16/P18 578592PIPELINES K/20 578594AUSTRALIA K/25 578596Iplex K2Iplex K2ISOTUBI M 15 578312NUMEPRESS M 18 578314
M 22 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
IVAR B 14 578466Ivar-Press B 16 578468
B 18 578470B 20 578472B 26 578474B 32 578476Fz 40 578478
IVAR TH 16 578352Multi Press MP TH 18 578356
TH 20 578358TH 25 578360TH 26 578362TH 32 578364TH 40 578624F 16 578456F 18 578458F 20 578460F 26 578462F 32 578464Fz 40 578478H 16 578400H 18 578404H 20 578406H 25 578408H 26 578410H 32 578412U 16 578374U 18 578376U 20 578378U 25 578380C 26 578392U 32 578382U 40 578386B 16 578468B 18 578470B 20 578472B 26 578474B 32 578476
REMS pressing tongs MiniREMS pressing rings
135
Accessories for REMS Mini-Press ACC and REMS Mini-Press 22 V ACC
System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.IVAR TH 16 578352Multi Press Leak TH 20 578358(MPL) TH 26 578362
TH 32 578364F 16 578456F 20 578460F 26 578462F 32 578464H 16 578400H 20 578406H 26 578410H 32 578412U 16 578374U 20 578378C 26 578392U 32 578382B 16 578468B 20 578472B 26 578474B 32 578476
IVAR TH 16 578352Plastic Multi Press TH 20 578358PMP TH 25 578360
TH 26 578362TH 32 578364F 16 578456F 20 578460F 26 578462F 32 578464H 16 578400H 20 578406H 25 578408H 26 578410H 32 578412U 16 578374U 20 578378U 25 578380C 26 578392U 32 578382B 16 578468B 20 578472B 26 578474B 32 578476
IVAR TH 16 578352Plastic Multi Press TH 20 578358Leak (PMPL) TH 26 578362
TH 32 578364F 16 578456F 20 578460F 26 578462F 32 578464H 16 578400H 20 578406H 26 578410H 32 578412U 16 578374U 20 578378C 26 578392U 32 578382B 16 578468B 20 578472B 26 578474B 32 578476
Jäger - Aquatec H 14 578398Aquapress H H 16 578400
H 17 578402H 18 578404H 20 578406H 26 578410H 32 578412U 40 578386
Jäger - Aquatec M 15 578312C-Stahl - Press M 18 578314Typ M M 22 578316
M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
Jäger - Aquatec M 15 578312Edelstahl - Press M 18 578314Typ M M 22 578316
M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
Jäger - Aquatec V 15 578328Kufper - Press V 18 578332Typ V V 22 578334
V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
Jansen TH 14 578348JANSEN prima TH 16 578352
TH 18 578356TH 20 578358TH 25 578360TH 26 578362TH 32 578364TH 40 578624
Jarafl ex- TH 14 578348Presssystem TH 16 578352
TH 20 578358TH 25 578360TH 26 578362TH 32 578364TH 40 578624
KAN U 16 578374KAN-therm U 20 578378
U 25 578380C 26 578392U 32 578382U 40 578386
KAN TH 14 578348KAN-therm LBP TH 16 578352
TH 20 578358TH 25 578360TH 26 578362TH 32 578364TH 40 578624U 14 578372U 16 578374U 20 578378U 25 578380C 26 578392U 32 578382U 40 578386
KAN M 15 578312KAN-therm M 181) 578314Inox M 22 578316
M 281) 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
KAN M 15 578312KAN-therm M 181) 578314Steel M 22 578316
M 281) 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
KE KELIT U 16 578374KELIT KELOX U 18 578376
U 20 578378U 25 578380U 32 578382U 40 578386
KE KELIT M 15 578312steelFIX M 18 578314C-Stahl M 22 578316
M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
KE KELIT M 15 578312steelFIX M 18 578314Edelstahl M 22 578316
M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
KEMBLA VAU 15 (OD 12,7 mm) 578630KemPress VAU 20 (OD 19,1 mm) 578632(AUS) VAU 25 (OD 25,4 mm) 578634
VAU 32 (OD 31,8 mm) 578636KEMBLA VAU 15 (OD 12,7 mm) 578630KemPress Gas VAU 20 (OD 19,1 mm) 578632(AUS) VAU 25 (OD 25,4 mm) 578634
VAU 32 (OD 31,8 mm) 578636KISAN KI 16 578524Kisan KD KI 20 578526
KI 25 578528TH 16 578352TH 20 578358TH 25 578360
KISAN KI 16 578524Kisan WL KI 20 578526
KI 25 578528KI 32 578530TH 16 578352TH 20 578358TH 25 578360TH 32 578364
KISAN KI 16 578524Kisan WM KI 20 578526
KI 25 578528KI 32 578530
KISAN U 20 578378Kisan WR U 25 578380
U 32 578382U 40 578386
KISAN M 15 578312Kistal C M 18 578314
M 22 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
KISAN M 15 578312Kistal Inox M 18 578314
M 22 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
KME TH 14 578348cuprotherm CTX TH 16 578352
TH 18 578356TH 20 578358TH 26 578362
KME TH 14 578348QTEC - Comap TH 16 578352SkinPress TH 20 578358
TH 26 578362KME H 16 A 578420QTEC - Oventrop H 20 A 578426Cofi t H 26 A 578430LECHAR TH 16 578352ALCOBRAPEX TH 20 578358
TH 26 578362TH 32 578364TH 40 578624
LECHAR U 16 578374COBRAPEX U 20 578378
U 25 578380U 32 578382
LEGEND-PRESS VUS ½" (OD 15,9 mm) 578566press fi tting VUS ¾" (OD 22,2 mm) 578568system VUS 1" (OD 28,6 mm) 578570
VUS 1¼" (OD 34,9 mm) 578606LK Systems V 12 578324LK >B<Press V 15 578328
V 18 578332V 22 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
Pressfi tting systems for gas installations must only be pressed with REMS pressing tongs Mini/pressing rings which are highlighted in yellow. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) For taking suitable pressing inserts.3) Adapter tongs are required for driving pressing rings (PR), see page 142.The suitability of REMS pressing tools for pressfi tting systems: Date 14.10.2016. For the updated situation regarding suitability status check our website: www.rems.de → Downloads → Product catalogues, brochures → REMS Catalogue.Pressing tongs for additional pressfi tting systems on request.
REMS pressing tongs MiniREMS pressing rings
136
Accessories for REMS Mini-Press ACC and REMS Mini-Press 22 V ACC
System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.LK Systems V 12 578324LK >B<Press V 15 578328Elförzinkat V 18 578332
V 22 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
LK Systems V 15 578328LK >B<Press V 18 578332Gas V 22 578334
V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
LK Systems TH 16 578352LK Universal TH 20 578358
TH 25 578360TH 32 578364TH 40 578624
LVI-DAHL U 16 578374Altech-Alupex U 20 578378
U 25 578380U 32 578382
MAINCOR U 16 578374MAINPRESS U 20 578378
U 25 578380U 32 578382
MAINCOR U 16 578374MAINFLOR U 20 578378MAINCOR M 15 578312MAINOX M 18 578314
M 22 578316M 28 578318
Mair Heiztechnik M 12 578310Gomafi x Cu/E1) M 15 578312
M 18 578314M 22 578316M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
Mair Heiztechnik H 11,5 578394Gomafi x M H 14 578398
H 16 578400H 20 578406
Mair Heiztechnik H 11,5 578394M-Press H 14 578398
H 16 578400H 20 578406H 26 578410H 32 578412
Ma.s.ter System TH 14 578348PRESSMASTER TH 16 578352
TH 18 578356TH 20 578358TH 25 578360TH 26 578362TH 32 578364TH 40 578624H 14 578398H 16 578400H 18 578404H 20 578406H 26 578410H 32 578412U 14 578372U 16 578374U 18 578376U 20 578378U 25 578380U 32 578382U 40 578386
MEGARO H 11,5 578394HAKAPRESS H 14 578398
H 16 578400H 17 578402H 18 578404H 20 578406H 26 578410H 32 578412
MEGARO B 16 578468MEGAPRESS B 20 578472
B 26 578474B 32 578476Fz 40 578478
MEGARO TH 16 578352MEGAPRESS MP TH 20 578358
TH 26 578362TH 32 578364F 16 578456F 20 578460F 26 578462F 32 578464Fz 40 578478H 16 578400H 20 578406H 26 578410H 32 578412U 16 578374U 20 578378U 32 578382B 16 578468B 20 578472B 26 578474B 32 578476
MEGARO TH 16 578352MEGAPRESS TH 20 578358MPL TH 26 578362
TH 32 578364F 16 578456F 20 578460F 26 578462F 32 578464Fz 40 578478H 16 578400H 20 578406H 26 578410H 32 578412U 16 578374U 20 578378U 32 578382B 16 578468B 20 578472B 26 578474B 32 578476
METALGRUP RFz 16 578492PexGrup RFz 20 578494
RFz 25 578496RFz 32 578498
METALGRUP U 16 578374MultiGrup U 18 578376
U 20 578378U 25 578380U 32 578382
MULTITHERM TH 16 578352PRESSSYSTEM TH 20 578358
TH 26 578362TH 32 578364TH 40 578624
Multicapas RFz 16 578492Industrial RFz 20 578494AIS PEX RFz 25 578496
RFz 32 578498U 16 578374U 20 578378U 25 578380U 32 578382
Multicapas U 16 578374Industrial U 18 578376multitubo systems U 20 578378MC U 25 578380
U 32 578382U 40 578386
Multicapas H 16 578400Industrial H 20 578406multitubo systems H 25 578408MM H 26 578410
H 32 578412RFz 16 578492RFz 20 578494RFz 25 578496RFz 32 578498TH 16 578352TH 20 578358TH 25 578360TH 26 578362TH 32 578364U 16 578374U 20 578378U 25 578380U 32 578382
Multi-Flex ACR H 12 (¼") 578396U 14 (⅜") 578372U 16 (½") 578374U 18 (⅝") 578376U 20 (¾") 578378U 25 (⅞") 578380U 32 (1⅛")U 32 (1⅛") 578382
Multi-Flex Gas U 16 (½") 578374U 20 (⅝") 578378U 25 (¾") 578380U 32 (1") 578382U 40 (1¼")U 40 (1¼") 578386
Multi-Flex Water U 16 (½") 578374U 25 (¾") 578380U 32 (1") 578382U 40 (1¼")U 40 (1¼") 578386
NEUTHERM H 16 578400MEKUPRESS-HT H 20 578406
H 26 578410H 32 578412
NIBCO (USA) VUS ½" (OD 15,9 mm) 578566Press System VUS ¾" (OD 22,2 mm) 578568Copper VUS 1" (OD 28,6 mm) 578570
VUS 1¼" (OD 34,9 mm) 578606Nicoll Fluxo TH 16 578352
TH 20 578358TH 26 578362TH 32 578364TH 40 578624
NUPIGECO U 14 578372Multinupi U 16 578374
U 18 578376U 20 578378C 26 578392U 32 578382U 40 578386
NUPIGECO B 16 578468Multipinza B 18 578470
B 20 578472B 26 578474B 32 578476F 16 578456F 18 578458F 20 578460F 26 578462F 32 578464H 16 578400H 18 578404H 20 578406H 26 578410H 32 578412TH 16 578352TH 18 578356TH 20 578358TH 26 578362TH 32 578364U 16 578374U 18 578376U 20 578378C 26 578392U 32 578382
Nussbaum VRX 16 578640Optifl ex-Flowpress VRX 20 578642
VRX 25 578644VRX 32 578646
Nussbaum VP 16 578482Optifl ex Press VP 20 578484
VP 25 578486VP 32 578488
Nussbaum V 15 578328Optipress V 18 578332Aquaplus V 22 578334
V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
Nussbaum V 15 578328Optipress Gaz V 18 578332
V 22 578334V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
Nussbaum V 15 578328Optipress-Therm V 18 578332
V 22 578334V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
O.M.T. - Press TH 16 578352TH 20 578358TH 26 578362TH 32 578364TH 40 578624
PBTub RFz 12 578490SERTIPRESS RFz 16 578492
RFz 20 578494RFz 25 578496
PBTub M 15 578312SERTI-STEEL1) M 18 578314
M 22 578316M 28 578318M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)M 28 45° (PR-2B)3) 574528 R
Pegler Yorkshire TH 14 578348Henco Multilayer TH 16 578352Solutions TH 18 578356
TH 20 578358TH 26 578362
REMS pressing tongs MiniREMS pressing rings
137
Accessories for REMS Mini-Press ACC and REMS Mini-Press 22 V ACC
System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.Pegler Yorkshire M 12 578310XPress Carbon M 15 578312
M 181) 578314M 22 578316M 281) 578318M 35 578390M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
Pegler Yorkshire M 12 578310XPress Copper M 15 578312
M 181) 578314M 22 578316M 281) 578318M 35 578390M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
Pegler Yorkshire M 15 578312XPress Copper M 181) 578314Gas M 22 578316
M 281) 578318M 35 578390
Pegler Yorkshire M 15 578312XPress Solar M 181) 578314
M 22 578316M 281) 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
Pegler Yorkshire M 15 578312XPress M 181) 578314Stainless M 22 578316
M 281) 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
Pegler Yorkshire M 15 578312XPress Stainless M 181) 578314Gas M 22 578316
M 281) 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
PERFEXIM U 16 578374"PERFEKT U 20 578378SYSTEM" U 25 578380
U 32 578382PERFILTUBO U 16 578374PERFILALUPEX U 18 578376
U 20 578378U 25 578380U 32 578382U 40 578386
PERFILTUBO M 15 578312PERFILPRESS M 18 578314
M 22 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
PEXTUBE RFz 16 578492PexTube RFz 20 578494
RFz 25 578496RFz 32 578498
Pipelife M 15 578312C-PRESS M 18 578314
M 22 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
Pipelife TH 16 578352RADOPRESS TH 18 578356
TH 20 578358TH 26 578362TH 32 578364TH 40 578624
Pipetec Connect TH 16 578352TH 20 578358TH 26 578362TH 32 578364TH 40 578624
PLASTICA ALFA TH 16 578352Multypex TH 20 578358
TH 26 578362TH 32 578364
PLASTICA ALFA TH 16 578352Multypex TH 20 578358Air TH 26 578362
TH 32 578364PLASTICA ALFA TH 16 578352Multypexalfa Gas TH 20 578358
TH 26 578362PLASTICA ALFA TH 16 578352Multypexalfa Gas TH 20 578358protek TH 26 578362PLASTICA ALFA TH 16 578352Multypex TH 20 578358Plus TH 26 578362
TH 32 578364PLASTICA ALFA TH 16 578352Multypex TH 20 578358Thermo TH 26 578362
TH 32 578364PLASTICA ALFA TH 16 578352Multypex TH 20 578358Thermo Plus TH 26 578362
TH 32 578364PLÁSTICOS U 16 578374FERRO U 20 578378FERROPLAST U 25 578380GPF MC PRESS U 32 578382Pressfi ttingMULTICAPAPLÁSTICOS U 16 578374FERRO U 20 578378FERROPLAST U 25 578380GPF PPSU U 32 578382Pressfi tting PE-Xy MULTICAPAy MULTICAPAPLÁSTICOS RFz 16 578492FERRO RFz 20 578494FERROPLAST RFz 25 578496GPF PRESS RFz 32 578498Pressfi tting PE-XPressfi tting PE-XPLUMBING PLUS K16/P18 578592EziPex Crimp K/20 578594(AUS) K/25 578596
K32 578598K1/40 578600
PLUMBING PLUS K16/P18 578592EziPex Gas K/20 578594(AUS) K/25 578596
K32 578598K1/40 578600
PLUMBING PLUS VAU 15 (OD 12,7 mm) 578630EziPress Gas VAU 20 (OD 19,1 mm) 578632(AUS) VAU 25 (OD 25,4 mm) 578634
VAU 32 (OD 31,8 mm) 578636PLUMBING PLUS VAU 15 (OD 12,7 mm) 578630EziPress Solar VAU 20 (OD 19,1 mm) 578632(AUS)(AUS) VAU 25 (OD 25,4 mm) 578634PLUMBING PLUS VAU 15 (OD 12,7 mm) 578630EziPress Water VAU 20 (OD 19,1 mm) 578632(AUS) VAU 25 (OD 25,4 mm) 578634
VAU 32 (OD 31,8 mm) 578636POLYPIPE TH 10 578342POLYSURE TH 15 578350
TH 22 578588TH 28 578590
POLYSAN M 15 578312Handelsges. M 18 578314m.b.H. & Co KG M 22 578316(Krems/Öster- M 28 578318reich) M 35 578390POLYSAN- M 15 45° (PR-2B)3) 574522 R
C Stahl-Press- M 18 45° (PR-2B)3) 574524 R
System M M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
POLYSAN V 15 578328Handelsges. V 18 578332m.b.H. & Co KG V 22 578334(Krems/Öster- V 28 578336reich) V 35 578604POLYSAN- V 15 45° (PR-2B)3) 574504 R
C Stahl-Press- V 18 45° (PR-2B)3) 574506 R
System V V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
POLYSAN M 15 578312Handelsges. M 18 578314m.b.H. & Co KG M 22 578316(Krems/Öster- M 28 578318reich) M 35 578390POLYSAN- M 15 45° (PR-2B)3) 574522 R
Edelstahl M 18 45° (PR-2B)3) 574524 R
Press-System M 22 45° (PR-2B)3) 574526 R
Gas M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
POLYSAN M 15 578312Handelsges. M 18 578314m.b.H. & Co KG M 22 578316(Krems/Öster- M 28 578318reich) M 35 578390POLYSAN- M 15 45° (PR-2B)3) 574522 R
Edelstahl M 18 45° (PR-2B)3) 574524 R
Press-System M 22 45° (PR-2B)3) 574526 R
Wasser M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
POLYSAN TH 14 578348Handelsges. TH 16 578352m.b.H. & Co KG TH 17 578354(Krems/Öster- TH 18 578356reich) TH 20 578358POLYSAN- TH 26 578362Press-System TH 32 578364
TH 40 578624POLYSAN TH 14 578348Handelsges. TH 16 578352m.b.H. & Co KG TH 17 578354(Krems/Öster- TH 18 578356reich) TH 20 578358POLYSAN-Henco- TH 26 578362Press-SystemPOLYSAN U 16 578374(España) U 18 578376Rainbow U 20 578378
U 25 578380U 32 578382U 40 578386
Prandelli H 14 578398Multyrama Pf H 16 578400
H 18 578404H 20 578406H 26 578410H 32 578412
Prandelli H 16 578400Multyrama Pfm H 18 578404
H 20 578406H 26 578410H 32 578412TH 16 578352TH 18 578356TH 20 578358TH 26 578362TH 32 578364U 16 578374U 18 578376U 20 578378
Raccorderie M 15 578312Metalliche M 18 578314aesPRES1) M 22 578316
M 28 578318Raccorderie M 15 578312Metalliche M 18 578314inoxPRES1) M 22 578316
M 28 578318Raccorderie M 15 578312Metalliche M 18 578314steelPRES1) M 22 578316
M 28 578318RBM Tita-gas TH 16 578352
TH 20 578358TH 26 578362TH 32 578364
Pressfi tting systems for gas installations must only be pressed with REMS pressing tongs Mini/pressing rings which are highlighted in yellow. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) For taking suitable pressing inserts.3) Adapter tongs are required for driving pressing rings (PR), see page 142.The suitability of REMS pressing tools for pressfi tting systems: Date 14.10.2016. For the updated situation regarding suitability status check our website: www.rems.de → Downloads → Product catalogues, brochures → REMS Catalogue.Pressing tongs for additional pressfi tting systems on request.
REMS pressing tongs MiniREMS pressing rings
138
Accessories for REMS Mini-Press ACC and REMS Mini-Press 22 V ACC
System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.RBM Tita-fi x B 14 578466
B 16 578468B 18 578470B 20 578472B 26 578474F 16 578456F 18 578458F 20 578460H 14 578398H 16 578400H 18 578404H 20 578406H 26 578410H 32 578412TH 14 578348TH 16 578352TH 18 578356TH 20 578358TH 26 578362TH 32 578364TH 40 578624U 14 578372U 16 578374U 18 578376U 20 578378
Redi Nicoll Fluxo TH 14 578348TH 16 578352TH 18 578356TH 20 578358TH 26 578362TH 32 578364TH 40 578624
Redi Nicoll Fluxo TH 16 578352Gas TH 20 578358
TH 26 578362RIFENG U U 14 578372PRESS FITTING U 16 578374(F5) U 18 578376
U 20 578378U 25 578380U 32 578382U 40 578386
RIFENG TH TH 16 578352PRESS FITTING TH 20 578358(F9) TH 25 578360
TH 26 578362TH 32 578364TH 40 578624
RIQUIER RFz 12 578490A SERTIR RFz 16 578492
RFz 20 578494RFz 25 578496
Roth RN 14 578434RN 17 578436RN 20 578438RN 25/26 578440RN 32 578442
Roth España - TH 16 578352Global Plastic TH 18 578356Rothapress TH 20 578358
TH 25 578360TH 32 578364TH 40 578624
Roth Nordic RN 16 578454Alu-LaserPlus/ RN 20 578438PressCheck RN 25/26 578440(DNK-NOR-SWE-FIN) RN 32 578442Rubinetterie TH 14 578348Bresciane TH 16 578352Bonomi TH 18 578356TURBO PRESS TH 20 578358
TH 26 578362TH 32 578364TH 40 578624
Rubinetterie TH 16 578352Bresciane TH 20 578358Bonomi TH 26 578362TURBO PRESS TH 32 578364GASSA.MI plastic TH 14 578348
TH 16 578352TH 18 578356TH 20 578358TH 26 578362TH 32 578364TH 40 578624
SA.MI plastic TH 16 578352Multistrato Gas TH 20 578358
TH 26 578362TH 32 578364
SANHA B 16 5784683fi t-Press Pb-free B 20 578472Serie 25000 B 26 578474
B 32 578476F 16 578456F 20 578460F 26 578462F 32 578464Fz 40 578478H 16 578400H 20 578406H 26 578410H 32 578412TH 16 578352TH 20 578358TH 26 578362TH 32 578364TH 40 578624U 16 578374U 20 578378C 26 578392U 32 578382U 40 578386
SANHA B 16 5784683fi t-Press PPSU B 20 578472Serie 35000 B 26 578474
B 32 578476F 16 578456F 20 578460F 26 578462F 32 578464H 16 578400H 20 578406H 26 578410H 32 578412TH 16 578352TH 20 578358TH 26 578362TH 32 578364U 16 578374U 20 578378C 26 578392U 32 578382
SANHA-NiroSan SA 15 578514Gas Presssystem SA 18 578518Serie 17000 SA 22 578520
SA 28 578522M 15 1) 578312M 18 1) 578314M 22 1) 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
V 15 1) 578328V 18 1) 578332V 22 1) 578334V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
SANHA-NiroSan SA 15 578514Industry SA 18 578518Presssystem SA 22 578520Serie 18000 SA 28 578522
M 15 1) 578312M 18 1) 578314M 22 1) 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
V 15 1) 578328V 18 1) 578332V 22 1) 578334V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
SANHA-NiroSan- SA 15 578514Presssystem SA 18 578518Serie 9000 SA 22 578520
SA 28 578522M 15 1) 578312M 18 1) 578314M 22 1) 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
V 15 1) 578328V 18 1) 578332V 22 1) 578334V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
SANHA-NiroSan SA 15 578514SF Presssystem SA 18 578518Serie 19000 SA 22 578520(silicone free) SA 28 578522
M 15 1) 578312M 18 1) 578314M 22 1) 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
V 15 1) 578328V 18 1) 578332V 22 1) 578334V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
SANHA SA 15 578514NiroTherm SA 18 578518Serie 91000 SA 22 578520
SA 28 578522M 15 1) 578312M 18 1) 578314M 22 1) 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
V 15 1) 578328V 18 1) 578332V 22 1) 578334V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
SANHA SA 15 578514NiroTherm SA 18 578518Industry SA 22 578520Serie 98000 SA 28 578522
M 15 1) 578312M 18 1) 578314M 22 1) 578316M 28 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
V 15 1) 578328V 18 1) 578332V 22 1) 578334V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
REMS pressing tongs MiniREMS pressing rings
139
Accessories for REMS Mini-Press ACC and REMS Mini-Press 22 V ACC
System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.SANHA-Press SA 12 578510Chrom SA 15 578514Serie 16000 SA 18 578518
SA 22 578520SA 28 578522M 12 578310M 15 1) 578312M 18 1) 578314M 22 1) 578316M 28 578318M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
V 12 578324V 15 1) 578328V 18 1) 578332V 221) 578334V 28 578336V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)V 28 45° (PR-2B)3) 574510 R
SANHA-Press SA 12 578510GAS Pressfi ttings SA 14 578512Serie 10000/ SA 15 578514Serie 11000 SA 16 578516
SA 18 578518SA 22 578520SA 28 578522M 12 578310M 15 1) 578312M 18 1) 578314M 22 1) 578316M 28 578318M 35 578390M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
V 12 578324V 14 578326VG 16 578340V 15 1) 578328V 16 578330VG 16 578340V 18 1) 578332V 22 1) 578334V 28 578336V 35 578604V 12 45° (PR-2B)V 12 45° (PR-2B)3) 574502 R
VG 14 45° (PR-2B)3) 574536 R
V 15 45° (PR-2B)3) 574504 R
VG 16 45° (PR-2B)VG 16 45° (PR-2B)3) 574538 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
SANHA-Press SA 12 578510Pressfi ttings SA 14 578512Serie 6000 SA 15 578514
SA 16 578516SA 18 578518SA 22 578520SA 28 578522M 12 578310M 15 1) 578312M 18 1) 578314M 22 1) 578316M 28 578318M 35 578390M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
V 12 578324V 14 578326VG 14 578338V 15 1) 578328V 16 578330VG 16 578340V 18 1) 578332V 22 1) 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R
VG 14 45° (PR-2B)3) 574536 R
V 15 45° (PR-2B)3) 574504 R
VG 16 45° (PR-2B)3) 574538 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
SANHA-Press SA 12 578510SOLAR SA 15 578514Pressfi ttings SA 18 578518Serie 12000/ SA 22 578520Serie 13000 SA 28 578522
M 12 578310M 15 1) 578312M 18 1) 578314M 22 1) 578316M 28 578318M 35 578390M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
V 12 578324V 151) 578328V 18 1) 578332V 22 1) 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
SANHA SA 12 578510PURAPRESS SA 14 578512Serie 8000 SA 15 578514
SA 16 578516SA 18 578518SA 22 578520SA 28 578522M 12 1) 578310M 15 1) 578312M 18 1) 578314M 22 1) 578316M 28 1) 578318M 35 1) 578390M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
V 12 578324V 14 578326VG 14 578338V 15 1) 578328V 16 578330VG 16 578340V 18 1) 578332V 22 1) 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R
VG 14 45° (PR-2B)3) 574536 R
V 15 45° (PR-2B)3) 574504 R
VG 16 45° (PR-2B)3) 574538 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
SANHA-Therm SA 12 578510Serie 24000 SA 15 578514
SA 18 578518SA 22 578520SA 28 578522M 12 578310M 15 1) 578312M 18 1) 578314M 22 1) 578316M 28 578318M 35 578390M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
V 12 578324V 15 1) 578328V 18 1) 578332V 22 1) 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
SANHA-Therm SA 12 578510Industry SA 15 578514Serie 28000 SA 18 578518
SA 22 578520SA 28 578522M 12 578310M 15 1) 578312M 18 1) 578314M 22 1) 578316M 28 578318M 35 578390M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
V 12 578324V 15 1) 578328V 18 1) 578332V 22 1) 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
SANPRO TH 16 578352THPRESS TH 20 578358
TH 26 578362TH 32 578364
SATEC SK VITerm TH 16 578352TH 18 578356TH 20 578358TH 26 578362TH 32 578364U 40 578386
Schwer Fittings M 12 578310AQUApress M 15 578312
M 18 578314M 22 578316M 28 578318M 35 578390M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
Seppelfricke V 12 578324VSH SudoPress V 15 578328C-Stahl V 18 578332Visu-Control V 22 578334
V 28 578336V 35 578604
Seppelfricke V 15 578328VSH SudoPress V 18 578332Edelstahl V 22 578334Visu-Control V 28 578336
V 35 578604Seppelfricke V 12 578324VSH SudoPress V 15 578328Kupfer V 18 578332Visu-Control V 22 578334
V 28 578336V 35 578604
Seppelfricke V 15 578328VSH SudoPress V 18 578332Kupfer Gas V 22 578334Visu-Control V 28 578336
V 35 578604Seppelfricke V 15 578328VSH SudoPress V 18 578332Kupfer Solar V 22 578334Visu-ControlSeppelfricke TH 14 578348SkinPress TH 16 578352Visu-Control TH 18 578356
TH 20 578358TH 26 578362THL 32 578368TH 40 578624
Pressfi tting systems for gas installations must only be pressed with REMS pressing tongs Mini/pressing rings which are highlighted in yellow. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) For taking suitable pressing inserts.3) Adapter tongs are required for driving pressing rings (PR), see page 142.The suitability of REMS pressing tools for pressfi tting systems: Date 14.10.2016. For the updated situation regarding suitability status check our website: www.rems.de → Downloads → Product catalogues, brochures → REMS Catalogue.Pressing tongs for additional pressfi tting systems on request.
REMS pressing tongs MiniREMS pressing rings
140
Accessories for REMS Mini-Press ACC and REMS Mini-Press 22 V ACC
System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.Seppelfricke M 12 578310VSH XPress M 15 578312C-Stahl M 181) 578314
M 22 578316M 281) 578318M 35 578390M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
Seppelfricke M 15 578312VSH XPress M 181) 578314Edelstahl M 22 578316
M 281) 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
Seppelfricke M 15 578312VSH XPress M 181) 578314Edelstahl gas M 22 578316
M 281) 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
Seppelfricke M 12 578310VSH XPress M 15 578312Kupfer M 181) 578314
M 22 578316M 281) 578318M 35 578390V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
Seppelfricke M 15 578312VSH XPress M 181) 578314Kupfer gas M 22 578316
M 281) 578318M 35 578390
SESTA TH 14 578348SESTA GAS TH 16 578352
TH 20 578358TH 26 578362TH 32 578364
SESTA H 16 578400sistema H 20 578406multistrato TH 14 578348
TH 16 578352TH 18 578356TH 20 578358TH 26 578362TH 32 578364TH 40 578624U 16 578374U 20 578378
SLOVARM U 16 578374PEX-THERM U 20 578378
H 26 578410U 32 578382H 16 578400H 20 578406H 26 578410H 32 578412
SOMATHERM H 16 578400MULTI’X H 20 578406
H 26 578410H 32 578412TH 16 578352TH 20 578358TH 26 578362TH 32 578364U 16 578374U 20 578378U 32 578382
SOMATHERM H 12 578396SomaPRESS H 16 578400
H 20 578406H 25 578408RFz 12 578490RFz 16 578492RFz 20 578494RFz 25 578496U 16 578374U 20 578378U 25 578380
STANDARD U 16 578374HIDRAULICA U 18 578376MultiStandard U 20 578378
U 25 578380U 32 578382U 40 578386
STELBI H 16 578400Polikraft H 20 578406
H 26 578410TH 16 578352TH 20 578358TH 26 578362TH 32 578364TH 40 578624U 16 578374U 20 578378
STELBI TH 16 578352Stelgas TH 20 578358
TH 26 578362STPC STPEX TH 16 578352
TH 20 578358TH 26 578362
Systerm H 16 A 578420WELCO-Gas H 20 A 578426
H 26 A 578430H 32 A 578432
Systerm H 14 A 578418WELCO-Flex H 16 A 578420
H 17 A 578422H 20 A 578426H 26 A 578430H 32 A 578432
Systerm H 16 A 578420WELCO-Teck H 20 A 578426
H 26 A 578430TDM BRASS H 16 578400Serie 1600 H 18 578404
H 20 578406H 25 578408H 26 578410H 32 578412TH 16 578352TH 18 578356TH 20 578358TH 25 578360TH 26 578362THL 32 578368U 16 578374U 18 578376U 20 578378U 25 578380C 26 578392U 32 578382
TDM BRASS TH 16 578352Serie 1700 (Gas) TH 20 578358
TH 26 578362THL 32 578368
TERMICALINE B 16 578468Termipex B 20 578472
B 26 578474B 32 578476H 16 578400H 20 578406TH 16 578352TH 20 578358TH 26 578362TH 32 578364U 16 578374U 20 578378
TermoConcept Basic E012) 578618TC-PRESSTHERMOLUTZ H 14 578398
H 16 578400TH 20 578358
TE-SA TH 14 578348TE-SA press TH 16 578352serie 800 TH 18 578356
TH 20 578358TH 26 578362TH 32 578364TH 40 578624
TIEMME TH 14 578348AL-COBRAPEX TH 16 578352Serie 1650 TH 18 578356
TH 20 578358TH 25 578360TH 26 578362THL 32 578368TH 40 578624
TIEMME RFz 12 578490Serie 1700 PE-X RFz 16 578492a pressare RFz 20 578494
RFz 25 578496RFz 32 578498
TIEMME TH 16 578352TIEMME Gas TH 20 578358
TH 26 578362THL 32 578368
TIGRE TH 16 578352ALPEX GÁS TH 20 578358
TH 26 578362TH 32 578364
TKM TH 14 578348Systemtechnik TH 16 578352
TH 20 578358TH 26 578362TH 32 578364TH 40 578624
TRA U 16 578374MULTITRAPRESS U 18 578376
U 20 578378U 25 578380U 32 578382U 40 578386
TRA TRAPRESS H 12 578396H 16 578400H 20 578406H 25 578408H 32 578412RFz 12 578490RFz 16 578492RFz 20 578494RFz 25 578496RFz 32 578498
TWEETOP U 16 578374U 20 578378U 25 578380U 32 578382U 40 578386
UNICAL AG U 16 578374MAX-MULTIPEX U 20 578378
H 26 578410U 32 578382
UNIDELTA TH 16 578352DeltAll TH 20 578358
TH 26 578362TH 32 578364TH 40 578624H 16 578400H 20 578406H 26 578410H 32 578412U 16 578374U 20 578378U 32 578382U 40 578386
UNIDELTA TH 16 578352DeltAll GAS TH 20 578358
TH 26 578362TH 32 578364TH 40 578624H 16 578400H 20 578406H 26 578410H 32 578412U 16 578374U 20 578378U 32 578382
Uponor MLC UP 14 578576UP 16 578578UP 18 578580UP 20 578582UP 25 578584UP 32 578586U 40 578386
Uponor MLC-D UP 16 578578UP 20 578582UP 25 578584UP 32 578586
Uponor MLC-G UP 20 578582UP 25 578584UP 32 578586
Uponor UP 16 578578Uni Pipe PLUS UP 20 578582
UP 25 578584UP 32 578586
Valsir PEXAL H 14 578398H 16 578400H 20 578406H 26 578410H 32 V 578602
Valsir PEXAL Gas H 14 578398H 16 578400H 20 578406H 26 578410
Van Marcke Log. TH 16 578352Tubipex TH 17 578354
TH 20 578358TH 26 578362TH 32 578364TH 40 578624
Van Marcke Log. M 12 578310Tubipress M 15 578312
M 18 578314M 22 578316M 28 578318M 35 578390M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
Variotherm TH 11,6 578344System TH TH 16 578352
TH 20 578358Viega VX 12 578550Fonterra VP 14/15 578480
VP 16/17 578482VP 20 578484VP 25 578486
REMS pressing tongs MiniREMS pressing rings
141
Accessories for REMS Mini-Press ACC and REMS Mini-Press 22 V ACC
System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.Viega Pexfi t VX 16 578552
VX 20 578554VX 25 578556
Viega Pexfi t VX 16 578552Fosta G VX 20 578554
VX 25 578556Viega Prestabo V 12 578324
V 15 578328V 18 578332V 22 578334V 28 578336V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
Viega Profi press V 12 578324VG 14 578338V 15 578328VG 16 578340V 18 578332V 22 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R
VG 14 45° (PR-2B)3) 574536 R
V 15 45° (PR-2B)3) 574504 R
VG 16 45° (PR-2B)3) 574538 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
Viega V 12 578324Profi press G V 15 578328
V 18 578332V 22 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
Viega V 12 578324Profi press S V 15 578328
V 18 578332V 22 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
Viega V 12 578324Profi press Therm V 15 578328
V 18 578332V 22 578334V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
Viega ProPress VUS ½" (OD 15,9 mm) 578566System USA VUS ¾" (OD 22,2 mm) 578568
VUS 1" (OD 28,6 mm) 578570VUS 1¼" (OD 34,9 mm) 578606
Viega Propress VAU 15 (OD 12,7 mm) 578630WATER System VAU 20 (OD 19,1 mm) 578632AUS VAU 25 (OD 25,4 mm) 578634
VAU 32 (OD 31,8 mm) 578636Viega PropressG VAU 15 (OD 12,7 mm) 578630GAS System VAU 20 (OD 19,1 mm) 578632AUS VAU 25 (OD 25,4 mm) 578634
VAU 32 (OD 31,8 mm) 578636Viega Raxinox VRX 16 578640
VRX 20 578642Viega Raxofi x VRX 16 578640
VRX 20 578642VRX 25 578644VRX 32 578646
Viega Sanfi x VP 16/17 578482VP 20 578484VP 25 578486VP 32 578488
Viega Sanpress V 12 578324V 15 578328V 18 578332V 22 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
Viega V 15 578328Sanpress Inox V 18 578332
V 22 578334V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
Viega V 15 578328Sanpress Inox G V 18 578332
V 22 578334V 28 578336V 35 578604V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
Viessmann TH 14 578348TH 16 578352TH 20 578358TH 26 578362TH 32 578364
VINSAR TH 16 578352PEX-AL-PEX TH 20 578358
TH 26 578362TH 32 578364
VSH MultiPress U 14 578372U 16 578374U 20 578378U 25 578380U 32 578382U 40 578386
VSH V 12 578324SudoPress Carbon V 15 578328
V 18 578332V 22 578334V 28 578336V 35 578604
VSH V 12 578324SudoPress Copper V 14 578326
V 15 578328V 16 578330V 18 578332V 22 578334V 28 578336V 35 578604
VSH V 12 578324SudoPress V 14 578326Copper Gas V 15 578328
V 16 578330V 18 578332V 22 578334V 28 578336V 35 578604
VSH V 14 578326SudoPress V 15 578328Copper Solar V 16 578330
V 18 578332V 22 578334
VSH V 15 578328SudoPress V 18 578332Stainless V 22 578334
V 28 578336V 35 578604
VSH TH 14 578348SkinPress TH 16 578352
TH 18 578356TH 20 578358TH 26 578362THL 32 578368TH 40 578624
VSH TH 16 578352SkinPress Gas TH 20 578358
TH 26 578362THL 32 578368
VSH M 12 578310XPress Carbon M 15 578312
M 181) 578314M 22 578316M 281) 578318M 35 578390M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
VSH M 12 578310XPress Copper M 15 578312
M 181) 578314M 22 578316M 281) 578318M 35 578390M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
VSH M 15 578312XPress Copper M 181) 578314GAS M 22 578316
M 281) 578318M 35 578390
VSH M 15 578312XPress Copper M 181) 578314Solar M 22 578316
M 281) 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
VSH M 15 578312XPress Stainless M 181) 578314
M 22 578316M 281) 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
VSH M 15 578312XPress Stainless M 181) 578314Gas M 22 578316
M 281) 578318M 35 578390M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
Walter Meier U 16 578374Metalplast U 18 578376
U 20 578378U 25 578380U 32 578382U 40 578386
Watts MTR TH 16 578352Art press TH 20 578358
TH 26 578362TH 32 578364
WATTS US ⅜" 578534RADIANT US ½" 578536Watts WaterPEX US ¾" 578538
US 1" 578540WATTS US ⅜" 578534RADIANT US ½" 578536Watts US ¾" 578538RadiantPEX US 1" 578540WATTS U 16 (½") 578374RADIANT U 20 (⅝") 578378Watts U 25 (¾") 578380RadiantPEX-AL U 32 (1")U 32 (1") 578382Wavin U 14 578372Tigris K1 U 16 578374
U 20 578378U 25 578380U 32 578382U 40 578386
Wavin U 14 578372Tigris M1 U 16 578374
U 20 578378U 25 578380U 32 578382U 40 578386
Pressfi tting systems for gas installations must only be pressed with REMS pressing tongs Mini/pressing rings which are highlighted in yellow. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) For taking suitable pressing inserts.3) Adapter tongs are required for driving pressing rings (PR), see page 142.The suitability of REMS pressing tools for pressfi tting systems: Date 14.10.2016. For the updated situation regarding suitability status check our website: www.rems.de → Downloads → Product catalogues, brochures → REMS Catalogue.Pressing tongs for additional pressfi tting systems on request.
REMS pressing tongs MiniREMS pressing rings
142
Accessories for REMS Mini-Press ACC and REMS Mini-Press 22 V ACC
AccessoriesAccessories
Description Art.-No.Adapter tongs Mini Z1 for driving REMS pressing rings 45° (PR-2B) 578558 RX
Steel case with insert for adapter tongs Mini Z1 and adapter tongs Z1 and 6 REMS pressing rings V 12 – 35 45° (PR-2B) or M 12 – 35 45° (PR-2B) 574516 R
Steel case with insert for 8 pressing tongs Mini/cropping tongs Mini and compartment for pipe cutter up to 42 mm 578295 R
System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.WeeConPress M 12 578310Alu M 15 578312
M 18 578314M 22 578316M 28 578318M 35 578390M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
V 12 578324V 15 578328V 18 578332V 22 578334V 28 578336V 35 578604V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
SA 12 578510SA 15 578514SA 18 578518SA 22 578520SA 28 578522
WeeConPress M 12 578310C-Stahl M 15 578312
M 18 578314M 22 578316M 28 578318M 35 578390M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
WeeConPress M 12 578310Inox M 15 578312
M 18 578314M 22 578316M 28 578318M 35 578390M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
WeeConPress M 12 578310Kupfer M 15 578312
M 18 578314M 22 578316M 28 578318M 35 578390M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
WeeConFlex H 16 578400MVR H 20 578406
H 26 578410H 32 578412U 40 578386TH 16 578352TH 20 578358TH 26 578362TH 32 578364TH 40 578624
WEM U 16 578374WIELAND TH 14 578348cuprotherm TH 16 578352CTX TH 18 578356
TH 20 578358TH 26 578362
WKS-Press TH 14 578348TH 16 578352TH 17 578354TH 20 578358TH 26 578362TH 32 578364TH 40 578624
WÜRTH TH 16 578352Würth TH 20 578358
TH 26 578362HE 32 578370HEz 40 578532
XtraConnect F 16 578456F 20 578460F 26 578462F 32 578464H 16 578400H 20 578406H 26 578410H 32 578412TH 16 578352TH 20 578358TH 26 578362TH 32 578364U 16 578374U 20 578378
(DN 26) U 25 578380U 32 578382VP 16 578482VP 20 578484VP 32 578488
Zetaesse TH 14 578348Multistrato TH 16 578352EUROPEX TH 18 578356
TH 20 578358TH 26 578362TH 32 578364U 14 578372U 16 578374U 18 578376U 20 578378
Zetaesse TH 14 578348Multistrato TH 16 578352ISOPEX TH 18 578356
TH 20 578358TH 26 578362TH 32 578364U 14 578372U 16 578374U 18 578376U 20 578378
Zetaesse Rame TH 14 578348HydroSAN TH 16 578352
TH 20 578358U 14 578372U 16 578374U 20 578378
Zetaesse Rame TH 14 578348ThermoSAN TH 16 578352
TH 20 578358U 14 578372U 16 578374U 20 578378
ZEWOTHERM TH 12 578346TH 16 578352TH 17 578354TH 18 578356TH 20 578358TH 26 578362TH 32 578364TH 40 578624
ZURN US ⅜" 578534INDUSTRIES US ½" 578536ZURN PEX US ¾" 578538
US 1" 578540
Pressfi tting systems for gas installations must only be pressed with REMS pressing tongs Mini/pressing rings which are highlighted in yellow. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) For taking suitable pressing inserts.3) Adapter tongs are required for driving pressing rings (PR), see page 142.The suitability of REMS pressing tools for pressfi tting systems: Date 14.10.2016. For the updated situation regarding suitability status check our website: www.rems.de → Downloads → Product catalogues, brochures → REMS Catalogue.Pressing tongs for additional pressfi tting systems on request.
REMS pressing tongs MiniREMS pressing rings
143
Supply formatREMS cropping tongs Mini. Cropping tongs with 1 pair of reversible cropping inserts for steel, stainless steel, M 6 – M 10. In a carton.Description for threaded rods Art.-No.REMS cropping tongs Mini M 6 M 6 578620REMS cropping tongs Mini M 8 M 8 578621REMS cropping tongs Mini M 10 M 10 578622
REMS cropping tongs Mini Accessories for REMS Mini-Press ACC and REMS Mini-Press 22 V ACC
German Quality ProductGerman Quality Product
High performance cropping tongs Mini in forged and specially hardened steel for cutting threaded rods.Steel, stainless steel up to hardness classifi cation 4.8 (400 N/mm2) M 6 – M 10
REMS cropping tongs Mini – cuts in just 2 seconds! Made of forged and specially hardened steel. Reversible cropping inserts for double service life.M cropping inserts with high precision thread contour machined on CNC machining centres for exact guiding of the threaded rod in the cutting process Pliers parts, cropping inserts and specially machined and hardened cutting edges, made to fi t exactly, for cutting without burr Threaded rod can be screwed into a threaded connection of the pipe clip or the nut without rework after cutting Cutting device in pliers design (Patent EP 1 459 825, patent US 7,284,330).Very compact design and low weight of the REMS Mini cropping tongs due to special arrangement of the cropping tongs connection (Patent EP 1 952 948). Recesses in the connecting plate for safe guidance of the connecting lugs for offset-free pressing (Patent EP 2 347 862).Driven by REMS Mini-Press ACC and REMS Mini-Press 22 V ACC.
Patent EP 1 952 948Patent EP 1 459 825Patent US 7,284,330Patent EP 2 347 862
AccessoriesAccessories
Description for threaded rods Art.-No.Cropping inserts M 6 (pair) M 6 571891Cropping inserts M 8 (pair) M 8 571896Cropping inserts M 10 (pair) M 10 571866Steel case with insert for 8 pressing tongs Mini/cropping tongs Mini and compartment for pipe cutter up to 42 mm 578295 R
144
REMS Eco-Press Manual radial press
German Quality ProductGerman Quality Product
Universal, manual radial press for producing pipe pressing joints for all common pressfi tting systems.Pressing joints with plastic and multi-layer composite tubes Ø 10 – 26 mm Ø ⅜ – 1"Complete range of REMS pressing tongs for all common pressfi tting systems, see page 152 – 170.
REMS Eco-Press – universal up to Ø 26 mm.Secure crimping in seconds. System advantageOnly one type of pressing tongs for all REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC) and radial presses of other makes. All pressing tongs marked by a * have another connection (Patent EP 1 223 008, Patent US 6,739,172) and also fi t the manual radial press REMS Eco-Press. Thus simple, inexpensive stocking.
Pressing tongs for all common systemsComplete assortment of REMS pressing tongs for all common pressfi tting systems (page 152 – 170). Highly durable pressing tongs made of forged, tenacious, specially hardened special steel. Pressing contours of REMS pressing tongs are system-specifi c and correspond to the respective pressfi tting system. Thus perfect system conformity, safe press jointing.
DesignCompact, handy, light. Drive unit with short tubular arms only 1.6 kg. Works any-where, free-hand, overhead, in confi ned areas. Secure seating of pressing tongs through locking pins. Dividable tubular arms for individual adjustment of leverage to accomodate different force demands of different pressfi tting systems.
Pressing operation A perfect joint is achieved when pressing tongs close completely. Final-lock-positioning, the pressing jaws remain in a closed position until opening. This way, the perfect pressing joint (completely closed pressing jaws) can be observed.
Supply formatREMS Eco-Press drive unit. Manual radial press with fi nal-lock-positioning for producing pressing joints of plastic and multi-layer composite tubes Ø 10 – 26 mm, Ø ⅜ – 1". For operating with REMS pressing tongs. With dividable tubular arms. In skin package.
Art.-No.574000 R
AccessoriesAccessories
Description Art.-No.REMS pressing tongs, see page 152 – 170.REMS cropping tongs for threaded rods see page 173.Carrying bag for drive unit and for 3 pressing tongs 574436 R
Steel case with insert for drive unit and for 3 pressing tongs 574430 R
Patent EP 1 223 008Patent US 6,739,172
145
REMS Power-Press SE Electric radial press
German Quality ProductGerman Quality Product
Universal, handy electric tool for producing pipe pressing joints for all common pressfi tting systems.Pipe pressing joints Ø 10 – 108 (110) mm Ø ⅜ – 4"Complete range of REMS pressing tongs/pressing rings for all common pressfi tting systems, see page 152 – 170.
REMS Power-Press SE – universal up to Ø 110 mm. Secure crimping in seconds. Automatic locking of pressing tongs. System advantageOnly one type of pressing tongs/pressing rings for all REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC) and radial presses of other makes. All pressing tongs marked by a * have another connection (Patent EP 1 223 008, Patent US 6,739,172) and also fi t the manual radial press REMS Eco-Press. Thus simple, inexpensive stocking.
Pressing tongs/pressing rings for all common systemsComplete assortment of REMS pressing tongs/pressing rings for all common pressfi tting systems (page 152 – 170). Highly durable pressing tongs/pressing rings made of tenacious, specially hardened special steel. Pressing contours of REMS pressing tongs/pressing rings are system-specifi c and correspond to the respective press fi tting system. Thus perfect system conformity, safe press jointing.
DesignCompact, robust, job site-proven. Small in size, slender design, drive unit only 4.7 kg. Works anywhere, free-hand, overhead, in confi ned areas. Secure seating of pressing tongs/adapter tongs by automatic locking. Also suitable for other suitable makes of pressing tongs/pressing chains.
Pressing operation by touch-controlFor reliable service, operating and functional safety. A perfect joint is achieved when pressing tongs close completely. The pressing tongs remain in a closed position until machine is switched and runs into reverse. The perfect pressing joint (completely closed pressing jaws) can be observed.
DriveEnormous thrust and pressing force for fast and perfect press jointing. Powerful electro-mechanical drive with proven universal motor, 450 W, maintenance-free gear with safety slipping clutch and in-feed system with machine screw spindle. Overload protection. Safety tip switch.
Supply formatREMS Power-Press SE Basic-Pack. Electric radial press for producing pressing joints Ø 10 – 108 (110) mm, Ø ⅜ – 4". For driving REMS pressing tongs/pressing rings and other suitable makes of pressing tongs/pressing rings. Pressing tongs seat with auto matic locking. Electro-mechanical drive with proven universal motor 230 V or 110 V, 50 – 60 Hz, 450 W, maintenance-free gear with safety slipping clutch and in-feed system with machine screw spindle, overload protection, safety tip switch. In sturdy steel case.
Art.-No.572111 R220
Other voltages on request.
AccessoriesAccessories
Description Art.-No.REMS Power-Press SE Drive Unit 572101 R220
REMS pressing tongs/pressing rings see page 152 – 170.REMS cropping tongs for threaded rods see page 173.REMS cable shear for electric cable see page 173.Steel case with insert 570280 R
Patent EP 1 223 008Patent US 6,739,172
146
REMS Power-Press Electro-hydraulic radial press with switch-off signal
German Quality ProductGerman Quality Product
Universal, handy electric tool with switch-off signal for producing pipe pressing joints for all common pressfi tting systems.Pipe pressing joints Ø 10 – 108 (110) mm Ø ⅜ – 4"Complete range of REMS pressing tongs/pressing rings for all common pressfi tting systems, see page 152 – 170.
REMS Power-Press – universal up to Ø 110 mm. Secure crimping in seconds. Automatic locking of pressing tongs. System advantageOnly one type of pressing tongs/pressing rings for all REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC) and radial presses of other makes. All pressing tongs marked by a * have another connection (Patent EP 1 223 008, Patent US 6,739,172) and also fi t the manual radial press REMS Eco-Press. Thus simple, inexpensive stocking.
Pressing tongs/pressing rings for all common systemsComplete assortment of REMS pressing tongs/pressing rings for all common pressfi tting systems (page 152 – 170). Highly durable pressing tongs/pressing rings made of tenacious, specially hardened special steel. Pressing contours of REMS pressing tongs/pressing rings are system-specifi c and correspond to the respective press fi tting system. Thus perfect system conformity, safe press jointing.
DesignCompact, robust, job site-proven. Small in size, slender design, drive unit only 4.7 kg. Works anywhere, free-hand, overhead, in confi ned areas. Ideal weight distribution for single handed operation. Ergonomically designed housing with recessed grip. Swivelling pressing tongs/adapter tongs seat. Secure seating of pressing tongs by automatic locking. Also suitable for other suitable makes of pressing tongs/pressing rings.
Pressing operation by touch-controlFor reliable service, operating and functional safety. A perfect joint is achieved when pressing tongs close completely. Acoustic signal after successful completion of pressing operation. The pressing tongs remain in a closed position until reset button is pushed and releases. This way, the perfect pressing joint (completely closed pressing jaws) can be observed.
DriveEnormous thrust and pressing force for fast and perfect press jointing. Powerful electro-hydraulic drive with proven universal motor 450 W, robust planetary gear, eccentric reciprocating pump and compact high power hydraulic system. Safety tip switch.
Supply formatREMS Power-Press Basic-Pack. Electro-hydraulic radial press with switch-off signal for producing pressing joints Ø 10 – 108 (110) mm, Ø ⅜ – 4". For driving REMS pressing tongs/pressing rings and other suitable makes of pressing tongs/pressing chains. Pressing tongs seat with automatic locking. Electro-hydraulic drive with proven universal motor 230 V or 110 V, 50 – 60 Hz, 450 W, robust planetary gear, eccentric reciprocating pump and compact high power hydraulic system. Safety tip switch. In sturdy steel case.
Art.-No.577011 R220
Other voltages on request.
AccessoriesAccessories
Description Art.-No.REMS Power-Press Drive Unit 577001 R220
REMS pressing tongs/pressing rings see page 152 – 170.REMS cropping tongs for threaded rods see page 173.REMS cable shear for electric cable see page 173.Steel case with insert 570280 R
Patent EP 1 223 008Patent US 6,739,172
147
REMS Power-Press ACC Electro-hydraulic radial press with automatic retraction
with automatic circuit control
German Quality ProductGerman Quality Product
Universal, handy electric tool with automatic circuit control for producing pipe pressing joints for all common pressfi tting systems.Pipe pressing joints Ø 10 – 108 (110) mm Ø ⅜ – 4"Complete range of REMS pressing tongs/pressing rings for all common pressfi tting systems, see page 152 – 170.
REMS Power-Press ACC – universal up to Ø 110 mm.With automatic circuit control. Secure crimping in seconds. Automatic locking of pressing tongs. System advantageOnly one type of pressing tongs/pressing rings for all REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC) and radial presses of other makes. All pressing tongs marked by a * have another connection (Patent EP 1 223 008, Patent US 6,739,172) and also fi t the manual radial press REMS Eco-Press. Thus simple, inexpensive stocking.
Pressing tongs/pressing rings for all common systemsComplete assortment of REMS pressing tongs/pressing rings for all common pressfi tting systems (page 152 – 170). Highly durable pressing tongs/pressing rings made of tenacious, specially hardened special steel. Pressing contours of REMS pressing tongs/pressing rings are system-specifi c and correspond to the respective press fi tting system. Thus perfect system conformity, safe press jointing.
DesignCompact, robust, job site-proven. Small in size, slender design, drive unit only 4.7 kg. Works anywhere, free-hand, overhead, in confi ned areas. Ideal weight distribution for single handed operation. Ergonomically designed housing with recessed grip. Swivelling pressing tongs/adapter tongs seat. Secure seating of pressing tongs by automatic locking. Also suitable for other suitable makes of pressing tongs/pressing rings.
Pressing operation by touch-control with ACCFor reliable service, operating and functional safety. Automatic retraction after completion of pressing operation (automatic circuit control).
DriveEnormous thrust and pressing force for fast and perfect press jointing. Powerful electro-hydraulic drive with proven universal motor 450 W, robust planetary gear, eccentric reciprocating pump and compact high power hydraulic system. Safety tip switch.
Supply formatREMS Power-Press ACC Basic-Pack. Electro-hydraulic radial press with automatic retraction for producing pressing joints Ø 10 – 108 (110) mm, Ø ⅜ – 4". For driving REMS pressing tongs/pressing rings and other suitable makes of pressing tongs/pressing rings. Pressing tongs seat with automatic locking. Electro-hydraulic drive with proven universal motor 230 V or 110 V, 50 – 60 Hz, 450 W, robust planetary gear, eccentric reciprocating pump and compact high power hydraulic system. Safety tip switch. In sturdy steel case.
Art.-No.577010 R220
Other voltages on request.
AccessoriesAccessories
Description Art.-No.REMS Power-Press ACC Drive Unit 577000 R220
REMS pressing tongs/pressing rings see page 152 – 170.REMS cropping tongs for threaded rods see page 173.REMS cable shear for electric cable see page 173.Steel case with insert 570280 R
Patent EP 1 223 008Patent US 6,739,172
148
REMS Power-Press XL ACC Electro-hydraulic radial press with automatic retraction
with automatic circuit control
Supply formatREMS Power-Press XL ACC Basic-Pack. Electro-hydraulic radial press with automatic retraction for producing pressing joints Ø 10 – 108 (110) mm, Ø ⅜ – 4". For driving REMS pressing tongs/pressing rings/pressing rings XL and other suitable makes of pressing tongs/pressing rings. Pressing tongs seat with auto-matic locking. Electro-hydraulic drive with proven universal motor 230 V or 110 V, 50 – 60 Hz, 450 W, robust planetary gear, eccentric reciprocating pump and com-pact high power hydraulic system. Safety tip switch. In transport case.
Art.-No.579010 R220
Other voltages on request.
AccessoriesAccessories
Description Art.-No.REMS Power-Press XL ACC drive Unit 579000 R220
Adapter tongs Z6 XL for driving REMS pressing rings XL 64,0 – 108,0 (PR-3S) 579120 R
Adapter tongs for other REMS pressing rings see page 170.REMS pressing tongs/pressing rings/pressing rings XL see page 152 – 170.REMS cropping tongs for threaded rods see page 173.REMS cable shear for electric cable see page 173.Transport case with inlays and practical carrying handles 579240 R
Universal, powerful power tool with automatic circuit control for making press joints of all common press fi tting systems.Pipe pressing joints Ø 10 – 108 (110) mm Ø ⅜ – 4"Complete range of REMS pressing tongs/pressing rings/pressing rings XL for all common pressfi tting systems, see page 152 – 170.
REMS Power-Press XL ACC – universal up to Ø 110 mm. Pressing up to Ø 110 mm in just one action. Ultra-fast, e.g. Geberit Mapress STAINLESS STEEL Ø 108 mm in only 15 seconds. With automatic circuit control. Automatic locking of pressing tongs. System advantageOnly one type of pressing tongs/pressing rings for all REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC) and radial presses of other makes. All pressing tongs marked by a * have another connection (Patent EP 1 223 008, Patent US 6,739,172) and also fi t the manual radial press REMS Eco-Press. Thus simple, inexpensive stocking.
Pressing tongs/pressing rings for all common systemsComplete assortment of REMS pressing tongs/pressing rings/pressing rings XL for all common pressfi tting systems (page 152 – 170). Highly durable pressing tongs/XL pressing rings made of tenacious, specially hardened special steel. Pressing contours of REMS pressing tongs/pressing rings/pressing rings XL are system-specifi c and correspond to the respective press fi tting system. Thus perfect system conformity, safe press jointing.
DesignCompact, robust, job site-proven. Small in size, slender design, drive unit only 5.5 kg. Long working stroke for pressings in a single action, ideal for large dimen-sions. Ultra-fast, e.g. Geberit Mapress STAINLESS STEEL Ø 108 mm in only 15 seconds. Ergonomically designed housing with soft grip and recessed handle. Swivelling pressing tongs/adapter tongs seat. Secure seating of pressing tongs by automatic locking. Also suitable for other suitable makes of pressing tongs/pressing rings. Adjustable hand guard.
Pressing operation by touch-control with ACCFor reliable service, operating and functional safety. Automatic retraction after completion of pressing operation (automatic circuit control).
DriveEnormous thrust and pressing force for fast and perfect press jointing. Powerful electro-hydraulic drive with proven universal motor 450 W, robust planetary gear, eccentric reciprocating pump and compact high power hydraulic system. Safety tip switch.
German Quality ProductGerman Quality Product
International International International Design AwardDesign AwardDesign Award
150
REMS Akku-Press Cordless radial press with switch-off signal
German Quality ProductGerman Quality Product
Universal, handy electric tool with switch-off signal for producing pipe pressing joints for all common pressfi tting systems. For battery and corded operation.Pipe pressing joints Ø 10 – 108 (110) mm / Ø ⅜ – 4Complete range of REMS pressing tongs/pressing rings for all common pressfi tting systems, see page 152 – 170.
REMS Akku-Press – universal up to Ø 110 mm. Secure crimping in seconds. Automatic locking of pressing tongs. System advantageOnly one type of pressing tongs/pressing rings for all REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC) and radial presses of other makes. All pressing tongs marked by a * have another connection (Patent EP 1 223 008, Patent US 6,739,172) and also fi t the manual radial press REMS Eco-Press. Thus simple, inexpensive stocking.
Pressing tongs/pressing rings for all common systemsComplete assortment of REMS pressing tongs/pressing rings for all common pressfi tting systems (page 152 – 170). Highly durable pressing tongs/pressing rings made of tenacious, specially hardened special steel. Pressing contours of REMS pressing tongs/pressing rings are system-specifi c and correspond to the respective press fi tting system. Thus perfect system conformity, safe press jointing.
DesignCompact, handy, light. Drive unit with battery only 4.3 kg. Works anywhere, free-hand, overhead, in confi ned areas. Optimum weight distribution for single- hand operation. Ergonomically shaped housing with recessed grip. Integrated LED work light for illuminating the work place. Swivelling pressing tongs seat. Secure seating of pressing tongs/adapter tongs by automatic locking. Also suitable for other suitable makes of pressing tongs/pressing rings. For battery and corded operation. Electronic charging status check with fl at battery protection and charging status indicator with 2-coloured LED.
Pressing operation by touch-controlFor reliable service, operating and functional safety. A perfect joint is achieved when pressing tongs close completely. Acoustic signal after successful completion of pressing operation. The pressing tongs remain in a closed position until reset button is pushed and releases. This way, the perfect pressing joint (completely closed pressing jaws) can be observed.
DriveEnormous thrust and pressing force for fast and perfect press jointing. Powerful electro-hydraulic drive with powerful battery motor 14.4 V, 380 W output, robust planetary gear, eccentric reciprocating pump and compact high power hydraulic system. Safety tip switch.
Battery or mains operationLi-Ion PLUS technology. Highly resistant Li-Ion 14.4 V battery with 3.0 Ah capacity, for long service life. Powerful and light. Li-Ion 14.4 V, 3.0 Ah battery for approx. 270 pressings Viega Profi press DN 15 per battery charge. Total discharge and overload protection with single cell monitoring. Temperature monitoring during the charging process. Operating temperature range –10 to +60 °C. No memory effect for maximum battery power. Rapid charger for short charging times. Li-Ion 230 V/14.4 V voltage supply for mains operation 230 V instead of Li-Ion battery 14.4 V, as accessory.
Supply formatREMS Akku-Press Basic-Pack. Cordless radial press with switch-off signal for producing pipe pressing joints Ø 10 – 108 (110) mm, Ø ⅜ – 4". For driving REMS pressing tongs/pressing rings and other suitable makes of pressing tongs/pressing rings. Swivelling pressing tongs seat with automatic locking. Electro-hydraulic drive with powerful battery motor 14.4 V, 380 W, robust planetary gear, eccentric recipro cating pump and compact high power hydraulic system. Safety tip switch. Integrated LED work light. Battery Li-Ion 14.4 V, 3.0 Ah, rapid charger Li-Ion/Ni-Cd 230 V or 110 V, 50 – 60 Hz, 65 W. In sturdy steel case.
Art.-No.571013 R220
Other voltages on request.
AccessoriesAccessories
Description Art.-No.REMS pressing tongs/pressing rings see page 152 – 170.REMS cropping tongs for threaded rods see page 173.REMS cable shear for electric cable see page 173.REMS Akku-Press drive unit, without battery 571003 R14
Battery Li-Ion 14.4 V, 3.0 Ah 571555 R14
Rapid charger Li-Ion/Ni-Cd 230 V, 50 – 60 Hz, 65 W 571560 R220
Voltage supply Li-Ion 230 V/14.4 V for mains operation 230 V instead of battery Li-Ion 14.4 V. 571565 R220
Steel case with inlay 571290 R
REMS cordless LED lamp see page 95 175200 R
with charging status check
Patent EP 1 223 008Patent US 6,739,172
International International International Design AwardDesign AwardDesign Award
151
REMS Akku-Press ACC Cordless radial press with automatic circuit control
German Quality ProductGerman Quality Product
with automatic circuit control and charging status check
Universal, handy electric tool with automatic circuit control for producing pipe pressing joints for all common pressfi tting systems. For battery and corded operation.Pipe pressing joints Ø 10 – 108 (110) mm / Ø ⅜ – 4Complete range of REMS pressing tongs/pressing rings for all common pressfi tting systems, see page 152 – 170.
REMS Akku-Press ACC – universal up to Ø 110 mm. With automatic circuit control. Secure crimping in seconds. Automatic locking of pressing tongs. System advantageOnly one type of pressing tongs/pressing rings for all REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC) and radial presses of other makes. All pressing tongs marked by a * have another connection (Patent EP 1 223 008, Patent US 6,739,172) and also fi t the manual radial press REMS Eco-Press. Thus simple, inexpensive stocking.
Pressing tongs/pressing rings for all common systemsComplete assortment of REMS pressing tongs/pressing rings for all common pressfi tting systems (page 152 – 170). Highly durable pressing tongs/pressing rings made of tenacious, specially hardened special steel. Pressing contours of REMS pressing tongs/pressing rings are system-specifi c and correspond to the respective press fi tting system. Thus perfect system conformity, safe press jointing.
DesignCompact, handy, light. Drive unit with battery only 4.3 kg. Works anywhere, free-hand, overhead, in confi ned areas. Optimum weight distribution for single- hand operation. Ergonomically shaped housing with recessed grip. Integrated LED work light for illuminating the work place. Swivelling pressing tongs seat. Secure seating of pressing tongs/adapter tongs by automatic locking. Also suitable for other suitable makes of pressing tongs/pressing rings. For battery and corded operation. Electronic charging status check with fl at battery protection and charging status indicator with 2-coloured LED.
Pressing operation by touch-control with ACCFor reliable service, operating and functional safety. Automatic retraction after completion of pressing operation (automatic circuit control).
DriveEnormous thrust and pressing force for fast and perfect press jointing. Powerful electro-hydraulic drive with powerful battery motor 14.4 V, 380 W output, robust planetary gear, eccentric reciprocating pump and compact high power hydraulic system. Safety tip switch.
Battery or mains operationLi-Ion PLUS technology. Highly resistant Li-Ion 14.4 V battery with 3.0 Ah capacity, for long service life. Powerful and light. Li-Ion 14.4 V, 3.0 Ah battery for approx. 270 pressings Viega Profi press DN 15 per battery charge. Total discharge and overload protection with single cell monitoring. Temperature monitoring during the charging process. Operating temperature range –10 to +60 °C. No memory effect for maximum battery power. Rapid charger for short charging times. Li-Ion 230 V/14.4 V voltage supply for mains operation 230 V instead of Li-Ion battery 14.4 V, as accessory.
Supply formatREMS Akku-Press ACC Basic-Pack. Cordless radial press with auto matic circuit control for producing pipe pressing joints Ø 10 – 108 (110) mm, Ø ⅜ – 4". For driving REMS pressing tongs/pressing rings and other suitable makes of press-ing tongs/pressing rings. Swivelling pressing tongs seat with automatic locking. Electro-hydraulic drive with powerful battery motor 14.4 V, 380 W, robust planetary gear, eccentric reciprocating pump and compact high power hydraulic system. Safety tip switch. Integrated LED work light. Battery Li-Ion 14.4 V, 3.0 Ah, rapid charger Li-Ion/Ni-Cd 230 V or 110 V, 50– 60 Hz, 65 W. In sturdy steel case.
Art.-No.571014 R220
Other voltages on request.
AccessoriesAccessories
Description Art.-No.REMS pressing tongs/pressing rings see page 152 – 170.REMS cropping tongs for threaded rods see page 173.REMS cable shear for electric cable see page 173.REMS Akku-Press ACC drive unit, without battery 571004 R14
Battery Li-Ion 14.4 V, 3.0 Ah 571555 R14
Rapid charger Li-Ion/Ni-Cd 230 V, 50 – 60 Hz, 65 W 571560 R220
Voltage supply Li-Ion 230 V/14.4 V for mains operation 230 V instead of battery Li-Ion 14.4 V. 571565 R220
Steel case with inlay 571290 R
REMS cordless LED lamp see page 95 175200 R
Patent EP 1 223 008Patent US 6,739,172
152
REMS pressing tongsREMS pressing rings
Accessories for REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC) and suitable radial presses of other makes
ZVSHK
Hold-Harmless and Indemnifi cation AgreementSee page 172.
Confi rmation of suitability See page 171.
for all common pressfi tting systems
Select REMS pressing tongs/ REMS pressing rings yourself!Find the desired press fi tting system in the table below and choose the size of pressing tongs/pressing rings that you require. Please note that pressfi tting systems for gas installation may only be pressed with the pressing tongs/pressing rings which are highlighted in yellow in the table. Intermediate tongs (page 170) are necessary for driving the REMS pressing rings (PR). Highly durable pressing tongs/pressing rings made of tenacious, specially hard-ened special steel. Pressing contours of REMS pressing tongs/pressing rings are system-specifi c and correspond with the respective pressfi tting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs/pressing rings manufactured on CNC production centres ensure high-precision machining of pressing contour. Low production tolerances as a result. Drive through all REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC) and suitable radial presses of other makes. All pressing tongs marked with * have an optional connection (Patent EP 1 223 008, Patent US 6,739,172) for manual drive through the radial press REMS Eco-Press. Read and follow the installation and assembly instructions of the system provider/manufacturer.
REMS pressing tongsREMS pressing tongs with 2 swivellable monoblock pressing jaws. Most sold standard version. REMS ACz, Fz, RFz, RFIz pressing tongs with teeth prevent formation of burr on the pressing sleeve (Patent EP 2 027 971).REMS pressing tongs (4G)REMS pressing tongs (4G) with two pivoted, parallel aligned pressing segments for linear pressing of midsize dimensions.
REMS pressing tongs (S)REMS pressing tongs (S) with one fi xed and two pivoted pressing segments, for midsize dimensions.
REMS pressing rings (PR-3S)REMS pressing ring (PR-3S) with 3 swivellable pressing segments mounted on a jointed ring for large dimension complex pressings. Ideal pressing through radially controlled movement of pressing segments, with adapter tongs.
REMS pressing rings (PR-3B)REMS pressing rings (PR-3B) with 3 pressing segments for high quality, large dimension pressings Optimum pressing by radially controlled movement of the pressing segments with adaptor tongs.
REMS pressing rings 45° (PR-2B)REMS pressing ring 45° (PR-2B), with 2 pressing jaws, for secure engagement of the pressing jaws in places of diffi cult access by 45° inclination (Patent EP 2 774 725). Drive with adapter tongs.
Traceability according to EN 1775:2007REMS pressing tongs/pressing rings with pressing contour F, M, V, SA, B, RN and UP have worked a specifi c marking into the pressing contour which leaves a lasting impression on the pressed fi tting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfi t connection even after the pressing process. With this traceability REMS fulfi ls the recommendations of the European standard EN 1775:2007 for the installation of pressfi tting systems for gas.
REMS pressing tongs (S)
REMS pressing rings (PR-3B)
with 2 swivellable monoblock pressing jaws. Most sold
REMS pressing tongs (4G)
REMS pressing rings (PR-3S)
REMS pressing rings 45° (PR-2B) Patent EP 2 774 725
German Quality ProductGerman Quality Product
Patent EP 1 223 008Patent US 6,739,172
153
REMS pressing tongsREMS pressing rings
Accessories for REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC) and suitable radial presses of other makes
Pressing tongs with teethPatent EP 2 027 971
Example REMS pressing tongs M: ”M” imprint on pressed fi tting for traceability according to EN 1775:2007
ACz
Fz
KI
RN
US
VP
ECI
HA
PF
THL
VF
VUS
FTB
K
RFz
UP
VIC
VX
B
G
M
SA
V
VR
C
H
MT
TH
VAU
VRX
F
HE
RFIz
U
VG
VUSF
154
Accessories for REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC) and suitable radial presses of other makes
System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.AC-FIX PRESS H 12* 570300(Global Piping H 16* 570320Systems) H 20* 570350
H 25* 570360H 32 570380RFz 12* 571320RFz 16* 571325RFz 20* 571330RFz 25 571335RFz 32 571340U 16* 570765U 20* 570775U 25* 570780U 32 570785VX 16* 571635VX 20* 571640
AC-FIX H 16* 570320PRESS-MULTI H 18* 570340(Global Piping H 20* 570350Systems) H 25* 570360
H 32 570380RFz 16* 571325RFz 20* 571330RFz 25 571335RFz 32 571340U 16* 570765U 18* 570770U 20* 570775U 25* 570780U 32 570785
ACOME H 16* 570320ACOPEX ALU H 20* 570350
H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775U 32 570785
ACOME MT ACz 12* 572642ACz 16* 572644ACz 20* 572646ACz 25 572648
AHLSELL M 12 570100A-press M 15 570110elförzinkad M 18 570120
M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
AHLSELL V 12 570107A-press koppar V 15 570115
V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
AHLSELL M 15 570110A-press rostfritt M 18 570120
M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
AIRBEL M 15 570110PRESSCLIM M 18 570120
M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
AIRBEL M 15 570110SERTINOX M 18 570120
M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
ALB TH 16* 570460Sistema Multicapa TH 18* 570465
TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390U 16* 570765U 18* 570770U 20* 570775C 26* 570750U 32 570785U 40 570790
APE Serie AP B 16* 570850B 20* 570860B 26 570870B 32 570880H 16* 570320H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775U 40 570790U 50 570795U 63 (PR-3B)3) 572837 R
U 63 (S)U 63 (S) 572365APE Serie AP TH 16* 570460Gas TH 20* 570470
TH 26* 570475TH 32 570480
AQUATECHNIK B 16* 570850Universal B 20* 570860
B 26 570870B 32 570880F 16* 570717F 20* 570727F 26* 570730F 32 570735H 16* 570320H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775C 26* 570750U 32 570785
ASCHL NIR M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
ASTM F 1807 US ⅜"* 571450(Fittings with US ½"* 571455Copper Crimp US ¾"* 571460Ring for PEX US 1"* 571465tubing) US 1 ¼" 571470
US 1 ½" 571475US 2 ” 571477
Bampi BALPEX TH 16* 570460(serie MP) TH 18* 570465
TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S)TH 63 (S) 572405
Bampi BALPEX TH 16* 570460Gas TH 20* 570470
TH 26* 570475BARBI H 12* 570300EASYPRESS H 16* 570320(Industrial Blansol) H 20* 570350
H 25* 570360H 32 570380RFz 12* 571320RFz 16* 571325RFz 20* 571330RFz 25 571335RFz 32 571340U 16* 570765U 20* 570775U 25* 570780U 32 570785
BARBI H 14* 570310MULTIPEX H 16* 570320(Industrial Blansol) H 18* 570340
H 20* 570350H 25* 570360H 26* 570370H 32 570380RFz 16* 571325RFz 18* 571327RFz 20* 571330RFz 25 571335RFz 32 571340TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 18* 570770U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837 R
U 63 (S)U 63 (S) 572365BEGETUBE/ B 14* 570845IVAR B 16* 570850
B 18* 570855B 20* 570860B 26 570870B 32 570880Fz 40 570742Fz 50 570747F 63 (S) 572385F 75 (PR-3B)F 75 (PR-3B)3) 572830 R
BRASELI TH 16* 570460GPF GAS TH 20* 570470
TH 25* 570495TH 32 570480
BRASELI RFz 16* 571325Pressfi tting PE-X RFz 20* 571330
RFz 25 571335RFz 32 571340
BRASELI U 16* 570765Pressfi tting U 18* 570770Multicapa U 20* 570775
U 25* 570780U 32 570785U 40 570790U 50 570795
Brass Form H 16* 570320Master Press H 18* 570340
H 20* 570350TH 16* 570460TH 18* 570465TH 20* 570470U 16* 570765U 18* 570770U 20* 570775
Brass & Fittings RFz 16* 571325Pressman RFz 18* 571327Multicapa ACz 20* 572646
RFz 25 571335RFz 32 571340
Brass & Fittings RFz 16* 571325Retipress RFz 18* 571327
ACz 20* 572646RFz 25 571335RFz 32 571340
BRASSTECH B 16* 570850MULTItermoSAN B 20* 570860Brasspress B 26 570870
B 32 570880F 16* 570717F 20* 570727F 26* 570730H 16* 570320H 18* 570340H 20* 570350H 26* 570370TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405U 16* 570765U 18* 570770U 20* 570775U 32 570785
Business Key M 15 570110MT-PRESS M 18 570120(inox) M 22 570130
M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
REMS pressing tongsREMS pressing rings
155
Accessories for REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC) and suitable radial presses of other makes
System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.Cello Products VUS ½" (OD 15,9 mm) 571770>B< Press VUS ¾" (OD 22,2 mm) 571775
VUS 1" (OD 28,6 mm) 571780VUS 1¼" (OD 34,9 mm) 571785VUS 1½" (OD 41,3 mm) 571790VUS 2" (OD 54,0 mm) 571795
CHIALI TH 16* 570460CHIALIPEX TH 20* 570470
TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S)TH 63 (S) 572405
Climatek TH 14* 570455Clima Therm TH 16* 570460
TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480H 40 A (4G)H 40 A (4G) 570695
Climatrix H 16* 570320Climatrix Rhinopex H 20* 570350
U 16* 570765U 20* 570775TH 14* 570455TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480
ClouSet TH 16* 570460TH 18* 570465TH 20* 570470
COMAP V 12 570107SudoPress Carbon V 15 570115
V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175
COMAP V 12 570107SudoPress Copper V 14 570112
V 15 570115V 16 570117V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175
COMAP V 12 570107SudoPress V 14 570112Copper Gas V 15 570115
V 16 570117V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175
COMAP V 14 570112SudoPress V 15 570115Copper Solar V 16 570117
V 18 570125V 22 570135
COMAP V 15 570115SudoPress V 18 570125Stainless V 22 570135
V 28 570145V 35 570155V 42 570165V 54 570175
Comap RFz 12* 571320PexPress RFz 16* 571325
RFz 20* 571330RFz 25 571335
Comap TH 14* 570455SkinPress TH 16* 570460
TH 18* 570465TH 20* 570470TH 26* 570475THL 32 570487TH 40 570485TH 50 (S) 572400TH 63 (S)TH 63 (S) 572405
Comap TH 16* 570460SkinPress Gas TH 20* 570470
TH 26* 570475THL 32 570487
Comap TH 16* 570460SkinPress PPSU TH 20* 570470
TH 26* 570475THL 32 570487
COMAP M 12 570100Xpress Carbon M 15 570110
M 181) 570120M 22 570130M 281) 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
COMAP M 12 570100Xpress Copper M 15 570110
M 181) 570120M 22 570130M 281) 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
COMAP M 15 570110Xpress Copper M 181) 570120Gas M 22 570130
M 281) 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)M 54 (PR-3S)3) 572708 R
COMAP M 15 570110Xpress Stainless M 181) 570120
M 22 570130M 281) 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
COMISA TH 14* 570455Press System TH 16* 570460
TH 18* 570465TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405H 14* 570310H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380B 14* 570845B 16* 570850B 18* 570855B 20* 570860B 26 570870B 32 570880
COMISA TH 16* 570460Press System Gas TH 20* 570470
TH 26* 570475TH 32 570480
CONEL F 16* 570717CONNECT F 20* 570727MULTI F 26* 570730
F 32 570735H 16* 570320H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775
(DN 26) U 25* 570780U 32 570785VP 16* 570910VP 20* 570915VP 32 570925
DIWAsystems TH 14* 570455TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S)TH 63 (S) 572405
DUOFIL U 16* 570765MKSYSTEM U 18* 570770
U 20* 570775U 25* 570780U 32 570785
DW Verbundrohr U 16* 570765multitubo systems U 18* 570770
U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837 R
U 63 (S) 572365U 75 (PR-3B)U 75 (PR-3B)3) 572828 R
EBRILLE U 16* 570765Isomonfl ex U 18* 570770
U 20* 570775U 25* 570780H 26* 570370TH 26* 570475U 32 570785
EBRILLE U 14* 570760Monfl ex U 16* 570765
U 18* 570770U 20* 570775U 25* 570780H 26* 570370TH 26* 570475U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837 R
U 63 (S) 572365U 75 (PR-3B)U 75 (PR-3B)3) 572828 R
EFFEBI M 15 570110PRESSTIGE M 18 570120
M 22 570130M 28 570140M 35 570150M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3)V 35 45° (PR-2B)3) 574512 R
REMS pressing tongsREMS pressing rings
Pressfi tting systems for gas installations must only be pressed with pressing tongs/pressing rings which are highlighted in yellow. Observe the national regulations.* These pressing tongs also fi t the manual radial press REMS Eco-Press. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) For this pressfi tting system producing a pressing joint with manual radial presses is not permitted.3) Adapter tongs are required for driving pressing rings (PR), see page 170.4) Press fi ttings made of red bronze (ProPress XL) must be pressed with pressing rings with press contour VUSR, copper fi ttings (ProPress XL-C)
and stainless steel fi ttings (ProPress XL-S) with pressing rings with press contour VUSF. 5) For taking suitable pressing inserts.6) Press fi ttings made of red bronze (Sanpress XL) must be pressed with pressing rings with press contour VR, copper fi ttings (Profi press XL, Profi press G XL),
carbon steel (Prestabo XL) and stainless steel fi ttings (Sanpress Inox XL, Sanpress Inox G XL) with pressing rings with press contour VF.7) Driven by REMS Power-Press XL.The suitability of REMS pressing tools for pressfi tting systems: Date 14.10.2016. For the updated situation regarding suitability status check our website: www.rems.de → Downloads → Product catalogues, brochures → REMS Catalogue.Pressing tongs/pressing rings for additional pressfi tting systems on request.
156
Accessories for REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC) and suitable radial presses of other makes
System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.EFFEBI TOF TH 16* 570460MULTIPINZA TH 18* 570465
TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405F 16* 570715F 18* 570720F 20* 570725F 26* 570730F 32 570735Fz 40 570742Fz 50 570747F 63 (S) 572385H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390U 16* 570765U 18* 570770U 20* 570775U 25* 570780C 26* 570750U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837 R
U 63 (S) 572365B 16* 570850B 18* 570855B 20* 570860B 26 570870B 32 570880
Elkhart VUS ½" (OD 15,9 mm) 571770APOLLOXPRESS VUS ¾" (OD 22,2 mm) 571775Fittings Copper VUS 1" (OD 28,6 mm) 571780and Low-Lead VUS 1¼" (OD 34,9 mm) 571785Brass VUS 1½" (OD 41,3 mm) 571790
VUS 2" (OD 54,0 mm) 571795Elkhart VUSF 2½" (PR-3B)3) 572819 R
APOLLOXPRESS (OD 66,7 mm)
LD-C Fittings VUSF 3" (PR-3B)3) 572820 R
Copper (OD 79,4 mm)
VUSF 4" (PR-3B)3) 572821 R
(OD 104,8 mm)
EMMETI B 16* 570850GERPEX- B 20* 570860FIVPRESS B 26 570870
B 32 570880F 16* 570715F 20* 570725H 16* 570320H 20* 570350TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405U 16* 570765U 20* 570775
EMPUR TH 14* 570455TH 15* 570457TH 16* 570460TH 17* 570462TH 20* 570470TH 25* 570495
EURACCORDI M 15 570110SYCPRESS M 18 570120STAINLESS M 22 570130STEEL PRESS M 28 570140FITTINGS M 35 570150
M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
EURACCORDI M 15 570110SYCPRESS M 18 570120CARBON STEEL M 22 570130PRESS FITTINGS M 28 570140
M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
EUROTUBI M 12 570100Europa C-STAHL M 15 570110PRESSFITTING M 18 570120SISTEM1) M 22 570130
M 28 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
EUROTUBI M 15 570110Europa INOX M 18 570120PRESSFITTING M 22 570130SISTEM1) M 28 570140
M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
Evans VAU 15 (½") 572687Components VAU 20 (¾") 572689Presslok VAU 25 (1") 572691
ECI 1½" 571932ECI 2" (4G) 571934ECI 2½" XL (PR-3S)3) 7) 579104 R
ECI 3" XL (PR-3S)3) 7) 579105 R
ECI 4" XL (PR-3S)ECI 4" XL (PR-3S)3) 7) 579106 R
FAR Rubinetterie TH 14* 570455PRESSFAR TH 16* 570460
TH 17* 570462TH 18* 570465TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405H 14* 570310H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390U 14* 570760U 16* 570765U 18* 570770U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837 R
U 63 (S)U 63 (S) 572365F.B.Q. BARONIO V 12 570107BQ press V 14 570112
V 15 570115V 16 570117V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502 R
V 14 45° (PR-2B)3) 574532 R
V 15 45° (PR-2B)3) 574504 R
V 16 45° (PR-2B)3) 574534 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
F.B.Q. BARONIO V 15 570115BQ press V 18 570125carbon steel V 22 570135
V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
F.B.Q. BARONIO V 15 570115BQ press gas V 18 570125
V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
Fercofl oor RFz 16* 571325DUO Press RFz 20* 571330FERCO PEX RFz 25 571335
RFz 32 571340TH 16* 570460TH 20* 570470TH 25* 570495TH 32 570480
Fercofl oor RFz 16* 571325DUO Press RFz 20* 571330MULTIFER RFz 25 571335
RFz 32 571340TH 16* 570460TH 20* 570470TH 25* 570495TH 32 570480U 16* 570765U 18* 570770U 20* 570775U 25* 570780U 32 570785
FILINOX FTB 15 571432Filpress FTB 18 571434
FTB 22 571436FTB 28 571438FTB 35 571440M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)M 54 (PR-3S)3) 572708 R
FILINOX M 15 570110Instalpress M 18 570120Steel M 22 570130
M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
FILINOX M 15 570110Instalpress M 18 570120Inox M 22 570130
M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
Fittings Estándar RFz 16* 571325ECO-PRESS RFz 20* 571330
RFz 25 571335RFz 32 571340
Fittings Estándar RFz 16* 571325MULTICAPA RFz 18* 571327
RFz 20* 571330RFz 25 571335RFz 32 571340
Fittings Estándar RFz 16* 571325PE-X RFz 20* 571330
RFz 25 571335RFz 32 571340
FOHS TH 16* 570460HEIZTECHNIK TH 20* 570470FOHSPRESS TH 26* 570475
TH 32 570480FORNARA B 16* 570850ForPress B 20* 570860
B 26 570870B 32 570880F 16* 570717F 20* 570727F 26* 570730F 32 570735H 16* 570320H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775U 32 570785
FRABO V 12 570107CHROMEPRESS V 15 570115
V 18 570125V 22 570135V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)V 22 45° (PR-2B)3) 574508 R
REMS pressing tongsREMS pressing rings
157
Accessories for REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC) and suitable radial presses of other makes
System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.FRABO V 12 570107FRABOPRESS V 15 570115C-STEEL V 18 570125Securfrabo V 22 570135
V 28 570145V 35 570155V 42 570165V 54 570175M 76,1 XL (PR-3S)3) 7)579101 R
M 88,9 XL (PR-3S)3) 7)579102 R
M 108,0 XL (PR-3S)3) 7) 579103 R
V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
FRABO V 15 570115FRABOPRESS V 18 570125C-STEEL GAS V 22 570135
V 28 570145V 35 570155V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
FRABO V 12 570107FRABOPRESS V 15 570115INOX 316 V 18 570125
V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175M 76,1 XL (PR-3S)3) 7)579101 R
M 88,9 XL (PR-3S)3) 7)579102 R
M 108,0 XL (PR-3S)3) 7) 579103 R
V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
FRABO V 15 570115FRABOPRESS V 18 570125INOX 316 GAS V 22 570135
V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
FRABO H 16* 570320FRABOPRESS H 20* 570350MULTI-BRASS TH 16* 570460(MB) TH 20* 570470
TH 26* 570475TH 32 570480U 16* 570765U 20* 570775
FRABO H 16* 570320FRABOPRESS H 20* 570350MULTI-PLUS H 26* 570370(MP) U 16* 570765
U 20* 570775C 26* 570750
FRABO V 22 570135FRABOPRESS V 28 570145NEXT V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
FRABO V 12 570107FRABOPRESS V 15 570115RAME (Cu) V 18 570125
V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175M 76,1 XL (PR-3S)3) 7)579101 R
M 88,9 XL (PR-3S)3) 7)579102 R
M 108,0 XL (PR-3S)3) 7) 579103 R
V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
FRABO V 12 570107FRABOPRESS V 15 570115RAME (Cu) V 18 570125
V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
FRABO V 15 570115SOLARPRESS V 18 570125
V 22 570135V 28 570145V 35 570155V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
FRABO FRABO M 22 570130TS PRESS M 22 45° (PR-2B)3) 574526 R
V 22 570135V 22 45° (PR-2B)V 22 45° (PR-2B)3) 574508 R
Fränkische B 16* 570850alpex-duo B 18* 570855
B 20* 570860B 26 570870B 32 570880F 16* 570717F 18* 570720F 20* 570727F 26* 570730F 32 570735TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480
Fränkische F 16* 570717alpex F50 PROFI F 20* 570727
F 26* 570730F 32 570735H 16* 570320H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775
(DN 26) U 25* 570780U 32 570785VP 16* 570910VP 20* 570915VP 32 570925
Fränkische F 202) 570727alpex-gas2) F 262) 570730
F 322) 570735Fränkische Fz 40 570742alpex L Fz 50 570747
F 63 (S) 572385F 75 (PR-3B)F 75 (PR-3B)3) 572830 R
gabotherm H+S TH 10* 570467TH 12* 570452TH 14* 570455TH 15* 570457TH 16* 570460TH 17* 570462TH 18* 570465TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S)TH 63 (S) 572405
Geberit Mapress M 12 570100C-STAHL M 15 570110
M 18 570120M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 76,1 XL (PR-3S)3) 7)579101 R
M 88,9 XL (PR-3S)3) 7)579102 R
M 108,0 XL (PR-3S)3) 7) 579103 R
M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
Geberit Mapress M 12 570100EDELSTAHL M 15 570110
M 18 570120M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 76,1 XL (PR-3S)3) 7)579101 R
M 88,9 XL (PR-3S)3) 7)579102 R
M 108,0 XL (PR-3S)3) 7) 579103 R
M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
Geberit Mapress M 15 570110EDELSTAHL Gas M 18 570120
M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (P R-2B)M 35 45° (P R-2B)3) 574530 R
Geberit Mapress M 12 570100KUPFER M 15 570110
M 18 570120M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 76,1 XL (PR-3S)3) 7)579101 R
M 88,9 XL (PR-3S)3) 7)579102 R
M 108,0 XL (PR-3S)3) 7) 579103 R
M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
REMS pressing tongsREMS pressing rings
Pressfi tting systems for gas installations must only be pressed with pressing tongs/pressing rings which are highlighted in yellow. Observe the national regulations.* These pressing tongs also fi t the manual radial press REMS Eco-Press. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) For this pressfi tting system producing a pressing joint with manual radial presses is not permitted.3) Adapter tongs are required for driving pressing rings (PR), see page 170.4) Press fi ttings made of red bronze (ProPress XL) must be pressed with pressing rings with press contour VUSR, copper fi ttings (ProPress XL-C)
and stainless steel fi ttings (ProPress XL-S) with pressing rings with press contour VUSF. 5) For taking suitable pressing inserts.6) Press fi ttings made of red bronze (Sanpress XL) must be pressed with pressing rings with press contour VR, copper fi ttings (Profi press XL, Profi press G XL),
carbon steel (Prestabo XL) and stainless steel fi ttings (Sanpress Inox XL, Sanpress Inox G XL) with pressing rings with press contour VF.7) Driven by REMS Power-Press XL.The suitability of REMS pressing tools for pressfi tting systems: Date 14.10.2016. For the updated situation regarding suitability status check our website: www.rems.de → Downloads → Product catalogues, brochures → REMS Catalogue.Pressing tongs/pressing rings for additional pressfi tting systems on request.
158
Accessories for REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC) and suitable radial presses of other makes
System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.Geberit Mapress M 15 570110KUPFER Gas M 18 570120
M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
Geberit Mepla G 16* 570400G 20* 570410G 26* 570420G 32 570430G 40 570440G 50 570450G 63 (S) 572470
Geberit Mepla G 16* 570400Therm G 20* 570410
G 26* 570420General Fittings B 16* 570850Serie 5S00 B 18* 570855
B 20* 570860B 26 570870B 32 570880F 16* 570717F 20* 570727F 26* 570730H 16* 570320H 18* 570340H 20* 570350H 25* 570360H 26* 570370H 32 570380H 40 (4G) 570390TH 16* 570460TH 18* 570465TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405U 16* 570765U 18* 570770U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (S) 572365U 63 (PR-3B)3) 572837 R
General Fittings B 16* 570850Trident B 20* 570860
B 26 570870B 32 570880F 16* 570717F 20* 570727F 26* 570730H 16* 570320H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775U 32 570785
General Fittings TH 16* 570460Trident Gas TH 20* 570470
TH 26* 570475TH 32 570480H 16* 570320H 20* 570350H 26* 570370H 32 570380U 16* 570765U 20* 570775U 32 570785
Giacomini H 16* 570320Raccordi RM H 20* 570350Giacomini H 26* 570370
H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480THL 32 570487U 16* 570765U 20* 570775U 32 570785U 40 570790U 50 570795U 63 (S) 572365
Giacomini H 16* 570320RM MULTIGAS H 20* 570350
H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480THL 32 570487U 16* 570765U 20* 570775U 32 570785
Giacomini V 15 570115Valvole Giacomini V 18 570125serie R850V V 22 570135
V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
SA 15 570935SA 18 570940SA 22 570945SA 28 570950SA 35 570955M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
Golan Pipe U 16* 570765Systems U 20* 570775(Scandinavia) U 25* 570780Alu-Pres U 32 570785
U 40 570790U 50 570795U 63 (S) 572365U 63 (PR-3B)3) 572837 R
U 75 (PR-3B)U 75 (PR-3B)3) 572828 R
Grinnell G-PRESS VUS ½" (OD 15,9 mm) 571770Copper Fittings VUS ¾" (OD 22,2 mm) 571775
VUS 1" (OD 28,6 mm) 571780VUS 1¼" (OD 34,9 mm) 571785VUS 1½" (OD 41,3 mm) 571790VUS 2" (OD 54,0 mm) 571795VUSF 2½" (PR-3B)3) 572819 R
(OD 66,7 mm)
VUSF 3" (PR-3B)3) 572820 R
(OD 79,4 mm)
VUSF 4" (PR-3B)3) 572821 R
(OD 104,8 mm)
GS TH 14* 570455Wärmesysteme TH 16* 570460System TH TH 20* 570470
TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S)TH 63 (S) 572405
GS V 15 570115Wärmesysteme V 18 570125System V V 22 570135
V 28 570145V 35 570155V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
GSP Group U 16* 570765USMetrix U 20* 570775HAGOS TH 16* 570460HakaGerodur TH 10* 570467HakaGerodur- TH 11,6* 570482System TH 12* 570452
TH 14* 570455TH 16* 570460TH 17* 570462TH 18* 570465TH 20* 570470
HakaGerodur TH 16* 570460HAKASAN TH 20* 570470
TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S)TH 63 (S) 572405
Harden 2000 TH 16* 570460B-Hidro TH 20* 570470
TH 26* 570475Harden 2000 TH 14* 570455Poly-Pex 2000 TH 16* 570460
TH 17* 570462TH 18* 570465TH 20* 570470TH 26* 570475THL 32 570487TH 40 570485TH 50 (S) 572400TH 63 (S)TH 63 (S) 572405
Harden 2000 TH 16* 570460Poly-Pex Gas TH 20* 570470
TH 26* 570475THL 32 570487
HASTINIK M 15 570110Hastinik/Hitpress M 18 570120
M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 76,1 XL (PR-3S)3) 7)579101 R
M 88,9 XL (PR-3S)3) 7)579102 R
M 108,0 XL (PR-3S)3) 7) 579103 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
heima-press TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S)TH 63 (S) 572405
HELIROMA U 16* 570765Klimapress U 18* 570770
U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837 R
U 63 (S) 572365U 75 (PR-3B)U 75 (PR-3B)3) 572828 R
HELIROMA RFz 16* 571325romapress RFz 20* 571330
RFz 25 571335RFz 32 571340
Henco TH 14* 570455TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475HE 32 571900HE 40 571902
Henco Gas TH 16* 570460TH 20* 570470TH 26* 570475HE 32 571900HE 40 571902
Herotec H 16* 570320TEMPUS-PRESS H 20* 570350PLUS H 25* 570360
H 32 570380RFz 16* 571325RFz 20* 571330RFz 25 571335RFz 32 571340TH 16* 570460TH 20* 570470TH 25* 570495TH 32 570480U 16* 570765U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (S) 572365U 63 (PR-3B)3) 572837 R
U 75 (PR-3B)U 75 (PR-3B)3) 572828 R
Herz pipefi x TH 10* 570467TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405TH 75 (PR-3B)TH 75 (PR-3B)3) 572829 R
HITEC Sistema TH 14* 570455Multistrato TH 16* 570460
TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S)TH 50 (S) 572400
Hopewell M 15 570110press fi t system M 18 570120
M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)M 54 (PR-3S)3) 572708 R
REMS pressing tongsREMS pressing rings
159
Accessories for REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC) and suitable radial presses of other makes
System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.hp-praski TH 10* 570467BAVARIA-press TH 14* 570455
TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S)TH 63 (S) 572405
IBP >B< Flex U 16* 570765U 18* 570770U 20* 570775U 25* 570780U 32 570785
IBP >B< Press V 12 570107V 14 570112V 15 570115V 16 570117V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502 R
V 14 45° (PR-2B)3) 574532 R
V 15 45° (PR-2B)3) 574504 R
V 16 45° (PR-2B)3) 574534 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
IBP >B< Press V 12 570107Carbon V 15 570115
V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
IBP >B< Press V 15 570115Gas V 18 570125
V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
IBP >B< Press V 15 570115Inox V 18 570125
V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
IBP >B< Press V 15 570115Solar V 18 570125
V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
ICMA H 16* 570320Sempiter H 20* 570350
H 26* 570370H 32 570380H 40 (4G) 570390TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405U 16* 570765U 20* 570775U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837 R
U 63 (S)U 63 (S) 572365ICMA TH 16* 570460Sempigas TH 20* 570470
TH 26* 570475TH 32 570480
Idrosanitaria TH 16* 570460Bonomi TH 20* 570470HomegasHomegas TH 26* 570475Idrosanitaria TH 16* 570460Bonomi TH 18* 570465Idropress TH 20* 570470
TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S)TH 63 (S) 572405
IDROSISTEMI TH 16* 570460Ta-Press TH 20* 570470
TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405F 16* 570717F 20* 570727F 26* 570730F 32 570735Fz 40 570742F 63 (S) 572385H 16* 570320H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390U 16* 570765U 20* 570775C 26* 570750U 32 570785U 40 570790U 50 570795U 63 (S) 572365B 16* 570850B 20* 570860B 26 570870B 32 570880
ILTA M 12 570100INOX/CHIBRO M 15 570110Pressfi tting Cuni M 18 570120
M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 76,1 XL (PR-3S)3) 7)579101 R
M 88,9 XL (PR-3S)3) 7)579102 R
M 108,0 XL (PR-3S)3) 7) 579103 R
M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
ILTA M 15 570110INOX/CHIBRO M 18 570120Pressfi tting inox M 22 570130
M 28 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 76,1 XL (PR-3S)3) 7)579101 R
M 88,9 XL (PR-3S)3) 7)579102 R
M 108,0 XL (PR-3S)3) 7) 579103 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
IPA IPANA Press TH 10* 570467TH 11,6* 570482TH 12* 570452TH 14* 570455TH 15* 570457TH 16* 570460TH 17* 570462TH 18* 570465TH 20* 570470TH 22* 570472TH 25* 570495TH 26* 570475TH 28 570477TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405TH 75 (PR-3B)TH 75 (PR-3B)3) 572829 R
IPA THu TH 16* 570460IPANA Press TH 20* 570470
TH 26* 570475TH 32 570480TH 40 570485U 16* 570765U 20* 570775H 16* 570320H 20* 570350H 26* 570370H 32 570380
IPALPEX TH 14* 570455(Industrie du TH 16* 570460Plastique et TH 18* 570465Accessoires) TH 20* 570470
TH 26* 570475THL 32 570487TH 40 570485TH 50 (S) 572400TH 63 (S)TH 63 (S) 572405
IPLEX K16/P18* 572600PIPELINES PF 22* 571980AUSTRALIAIplex Pro-fi tIplex Pro-fi tIPLEX K16/P18* 572600PIPELINES K/20* 572605AUSTRALIA K/25* 572610Iplex K1 K32 572615(Gas) K1/40 572620
K1/50 572625IPLEX K16/P18* 572600PIPELINES K/20* 572605AUSTRALIA K/25* 572610Iplex K2Iplex K2ISOLTUBEX RFz 16* 571325ISOLPEX RFz 20* 571330
RFIz 25 571337RFIz 32 571342
ISOLTUBEX RFz 16* 571325Multicapa RFz 20* 571330
RFIz 25 571337RFIz 32 571342U 16* 570765U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837 R
U 63 (S)U 63 (S) 572365
REMS pressing tongsREMS pressing rings
Pressfi tting systems for gas installations must only be pressed with pressing tongs/pressing rings which are highlighted in yellow. Observe the national regulations.* These pressing tongs also fi t the manual radial press REMS Eco-Press. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) For this pressfi tting system producing a pressing joint with manual radial presses is not permitted.3) Adapter tongs are required for driving pressing rings (PR), see page 170.4) Press fi ttings made of red bronze (ProPress XL) must be pressed with pressing rings with press contour VUSR, copper fi ttings (ProPress XL-C)
and stainless steel fi ttings (ProPress XL-S) with pressing rings with press contour VUSF. 5) For taking suitable pressing inserts.6) Press fi ttings made of red bronze (Sanpress XL) must be pressed with pressing rings with press contour VR, copper fi ttings (Profi press XL, Profi press G XL),
carbon steel (Prestabo XL) and stainless steel fi ttings (Sanpress Inox XL, Sanpress Inox G XL) with pressing rings with press contour VF.7) Driven by REMS Power-Press XL.The suitability of REMS pressing tools for pressfi tting systems: Date 14.10.2016. For the updated situation regarding suitability status check our website: www.rems.de → Downloads → Product catalogues, brochures → REMS Catalogue.Pressing tongs/pressing rings for additional pressfi tting systems on request.
160
Accessories for REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC) and suitable radial presses of other makes
System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.ISOTUBI M 15 570110NUMEPRESS M 181) 570120
M 22 570130M 281) 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 76,1 XL (PR-3S)3) 7)579101 R
M 88,9 XL (PR-3S)3) 7)579102 R
M 108,0 XL (PR-3S)3) 7) 579103 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
IVAR B 20* 570860ALPEX-GAS B 26 570870
B 32 570880IVAR B 14* 570845Ivar-Press B 16* 570850
B 18* 570855B 20* 570860B 26 570870B 32 570880Fz 40 570742Fz 50 570747F 63 (S)F 63 (S) 572385
IVAR TH 16* 570460MULTI PRESS TH 20* 570470GAS TH 26* 570475
TH 32 570480B 16* 570850B 20* 570860B 26 570870B 32 570880
IVAR TH 16* 570460MULTI PRESS TH 20* 570470GAS ITALIA TH 26* 570475
TH 32 570480H 16* 570320H 20* 570350H 26* 570370H 32 570380U 16* 570765U 20* 570775U 32 570785
IVAR TH 16* 570460Multi Press MP TH 18* 570465
TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405F 16* 570717F 18* 570720F 20* 570727F 26* 570730F 32 570735Fz 40 570742Fz 50 570747F 63 (S) 572385H 16* 570320H 18* 570340H 20* 570350H 25* 570360H 26* 570370H 32 570380H 40 (4G) 570390U 16* 570765U 18* 570770U 20* 570775U 25* 570780C 26* 570750U 32 570785U 40 570790U 50 570795U 63 (S) 572365B 16* 570850B 18* 570855B 20* 570860B 26 570870B 32 570880
IVAR TH 16* 570460Multi Press Leak TH 20* 570470(MPL) TH 26* 570475
TH 32 570480F 16* 570717F 20* 570727F 26* 570730F 32 570735H 16* 570320H 20* 570350H 26* 570370H 32 570380U 16* 570765U 20* 570775C 26* 570750U 32 570785B 16* 570850B 20* 570860B 26 570870B 32 570880
IVAR TH 16* 570460Plastic Multi Press TH 20* 570470Leak (PMPL) TH 26* 570475
TH 32 570480F 16* 570717F 20* 570727F 26* 570730F 32 570735H 16* 570320H 20* 570350H 26* 570370H 32 570380U 16* 570765U 20* 570775C 26* 570750U 32 570785B 16* 570850B 20* 570860B 26 570870B 32 570880
IVAR TH 16* 570460Plastic Multi Press TH 20* 570470PMP TH 25* 570495
TH 26* 570475TH 32 570480F 16* 570717F 20* 570727F 26* 570730F 32 570735H 16* 570320H 20* 570350H 25* 570360H 26* 570370H 32 570380U 16* 570765U 20* 570775U 25* 570780C 26* 570750U 32 570785B 16* 570850B 20* 570860B 26 570870B 32 570880
Jäger - Aquatec H 14* 570310Aquapress H H 16* 570320
H 17* 570330H 18* 570340H 20* 570350H 26* 570370H 32 570380U 40 570790U 50 570795U 63 (S)U 63 (S) 572365
Jäger - Aquatec M 15 570110C-Stahl - Press M 18 570120Typ M M 22 570130
M 28 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
Jäger - Aquatec M 15 570110Edelstahl-Press M 18 570120Typ M M 22 570130
M 28 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
Jäger - Aquatec V 15 570115Kupfer-Press V 18 570125Typ V V 22 570135
V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
Jansen TH 14* 570455JANSEN prima TH 16* 570460
TH 18* 570465TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S)TH 63 (S) 572405
Jarafl ex- TH 14* 570455Presssystem TH 16* 570460
TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S)TH 63 (S) 572405
KAN U 16* 570765KAN-therm U 20* 570775
U 25* 570780C 26* 570750U 32 570785U 40 570790TH 50 (S) 572400TH 63 (S)TH 63 (S) 572405
KAN U 14* 570760KAN-therm LBP U 16* 570765
U 20* 570775U 25* 570780C 26* 570750U 32 570785U 40 570790TH 14* 570455TH 16* 570460TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S)TH 63 (S) 572405
KAN M 15 570110KAN-therm M 181) 570120Inox M 22 570130
M 281) 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
KAN M 15 570110KAN-therm M 181) 570120Steel M 22 570130
M 281) 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
KE KELIT U 16* 570765KELIT KELOX U 18* 570770
U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (S) 572365U 75 (PR-3B)U 75 (PR-3B)3) 572828 R
KE KELIT M 15 570110steelFIX M 18 570120C-Stahl M 22 570130
M 28 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 76,1 XL (PR-3S)3) 7)579101 R
M 88,9 XL (PR-3S)3) 7)579102 R
M 108,0 XL (PR-3S)3) 7) 579103 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
KE KELIT M 15 570110steelFIX M 18 570120Edelstahl M 22 570130
M 28 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 76,1 XL (PR-3S)3) 7)579101 R
M 88,9 XL (PR-3S)3) 7)579102 R
M 108,0 XL (PR-3S)3) 7) 579103 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
KEMBLA VAU 15 (OD 12,7 mm) 572687KemPress VAU 20 (OD 19,1 mm) 572689(AUS) VAU 25 (OD 25,4 mm) 572691
VAU 32 (OD 31,8 mm) 572693VAU 40 (OD 38,1 mm) 572695VAU 50 (OD 50,8 mm) 572697
KEMBLA VAU 15 (OD 12,7 mm) 572687KemPress Gas VAU 20 (OD 19,1 mm) 572689(AUS) VAU 25 (OD 25,4 mm) 572691
VAU 32 (OD 31,8 mm) 572693VAU 40 (OD 38,1 mm) 572695VAU 50 (OD 50,8 mm) 572697
KISAN KI 16* 571360Kisan KD KI 20* 571370
KI 25* 571375TH 16* 570460TH 20* 570470TH 25* 570495
REMS pressing tongsREMS pressing rings
161
Accessories for REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC) and suitable radial presses of other makes
System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.KISAN KI 16* 571360Kisan WL KI 20* 571370
KI 25* 571375KI 32 571380TH 16* 570460TH 20* 570470TH 25* 570495TH 32 570480
KISAN KI 16* 571360Kisan WM KI 20* 571370
KI 25* 571375KI 32 571380
KISAN U 20* 570775Kisan WR U 25* 570780
U 32 570785U 40 570790U 50 570795
KISAN M 15 570110Kistal C M 18 570120
M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
KISAN M 15 570110Kistal Inox M 18 570120
M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
KME TH 14* 570455cuprotherm CTX TH 16* 570460
TH 18* 570465TH 20* 570470TH 26* 570475
KME TH 14* 570455Q-Tec - Comap TH 16* 570460SkinPress TH 20* 570470
TH 26* 570475KME H 16 A* 570620Q-Tec - Oventrop H 20 A* 570650Cofi t H 26 A* 570670LECHAR TH 16* 570460ALCOBRAPEX TH 20* 570470
TH 26* 570475TH 32 570480TH 40 570485
LECHAR U 16* 570765COBRAPEX U 20* 570775
U 25* 570780U 32 570785
LEGEND-PRESS VUS ½" (OD 15,9 mm) 571770press fi tting VUS ¾" (OD 22,2 mm) 571775system VUS 1" (OD 28,6 mm) 571780
VUS 1¼" (OD 34,9 mm) 571785VUS 1½" (OD 41,3 mm) 571790VUS 2" (OD 54,0 mm) 571795VUSF 2½" (PR-3B)3) 572819 R
(OD 66,7 mm)
VUSF 3" (PR-3B)3) 572820 R
(OD 79,4 mm)
VUSF 4" (PR-3B)3) 572821 R
(OD 104,8 mm)
LK Systems V 12 570107LK >B<Press V 15 570115
V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
LK Systems V 12 570107LK >B<Press V 15 570115Elförzinkat V 18 570125
V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
LK Systems V 15 570115LK >B<Press V 18 570125Gas V 22 570135
V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
LK Systems TH 16* 570460LK Universal TH 20* 570470
TH 25* 570495TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S)TH 63 (S) 572405
LVI-DAHL U 16* 570765Altech-Alupex U 20* 570775
U 25* 570780U 32 570785
MAINCOR U 16* 570765MAINPRESS U 20* 570775
U 25* 570780U 32 570785
MAINCOR U 16* 570765MAINFLOR U 20* 570775MAINCOR M 15 570110MAINOX M 181) 570120
M 22 570130M 281) 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)M 54 (PR-3S)3) 572708 R
Mair Heiztechnik M 12 570100Gomafi x Cu/E M 15 570110
M 181) 570120M 22 570130M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)M 22 45° (PR-2B)3) 574526 R
Mair Heiztechnik H 11,5* 570315Gomafi x M H 14* 570310
H 16* 570320H 20* 570350
Mair Heiztechnik H 11,5* 570315M-Press H 14* 570310
H 16* 570320H 20* 570350H 26* 570370H 32 570380U 40 570790
Ma.s.ter System TH 14* 570455PRESSMASTER TH 16* 570460
TH 18* 570465TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405H 14* 570310H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390U 14* 570760U 16* 570765U 18* 570770U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837 R
U 63 (S)U 63 (S) 572365MEGARO H 11,5* 570315HAKAPRESS H 14* 570310
H 16* 570320H 17* 570330H 18* 570340H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390U 40 570790F 63 (S)F 63 (S) 572385
MEGARO B 16* 570850MEGAPRESS B 20* 570860
B 26 570870B 32 570880Fz 40 570742F 63 (S)F 63 (S) 572385
MEGARO B 16* 570850MEGAPRESS MP B 20* 570860
B 26 570870B 32 570880F 16* 570715F 20* 570725F 26* 570730F 32 570735Fz 40 570742F 63 (S) 572385H 16* 570320H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775U 32 570785
MEGARO B 16* 570850MEGAPRESS B 20* 570860MPL B 26 570870
B 32 570880F 16* 570715F 20* 570725F 26* 570730F 32 570735Fz 40 570742F 63 (S) 572385H 16* 570320H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775U 32 570785
REMS pressing tongsREMS pressing rings
Pressfi tting systems for gas installations must only be pressed with pressing tongs/pressing rings which are highlighted in yellow. Observe the national regulations.* These pressing tongs also fi t the manual radial press REMS Eco-Press. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) For this pressfi tting system producing a pressing joint with manual radial presses is not permitted.3) Adapter tongs are required for driving pressing rings (PR), see page 170.4) Press fi ttings made of red bronze (ProPress XL) must be pressed with pressing rings with press contour VUSR, copper fi ttings (ProPress XL-C)
and stainless steel fi ttings (ProPress XL-S) with pressing rings with press contour VUSF. 5) For taking suitable pressing inserts.6) Press fi ttings made of red bronze (Sanpress XL) must be pressed with pressing rings with press contour VR, copper fi ttings (Profi press XL, Profi press G XL),
carbon steel (Prestabo XL) and stainless steel fi ttings (Sanpress Inox XL, Sanpress Inox G XL) with pressing rings with press contour VF.7) Driven by REMS Power-Press XL.The suitability of REMS pressing tools for pressfi tting systems: Date 14.10.2016. For the updated situation regarding suitability status check our website: www.rems.de → Downloads → Product catalogues, brochures → REMS Catalogue.Pressing tongs/pressing rings for additional pressfi tting systems on request.
162
Accessories for REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC) and suitable radial presses of other makes
System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.METALGRUP RFz 16* 571325PexGrup RFz 20* 571330
RFz 25 571335RFz 32 571340
METALGRUP U 16* 570765MultiGrup U 18* 570770
U 20* 570775U 25* 570780U 32 570785
MULTITHERM TH 16* 570460PRESSSYSTEM TH 20* 570470
TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405TH 75 (PR-3B)3) 572829 R
Multicapas RFz 16* 571325Industrial RFz 20* 571330AIS PEX RFz 25 571335
RFz 32 571340U 16* 570765U 20* 570775U 25* 570780U 32 570785
Multicapas U 16* 570765Industrial U 18* 570770multitubo systems U 20* 570775MC U 25* 570780
U 32 570785U 40 570790U 50 570795U 63 (S) 572365U 63 (PR-3B)3) 572837 R
U 75 (PR-3B)3) 572828 R
Multicapas H 16* 570320Industrial H 20* 570350multitubo systems H 25* 570360MM H 26* 570370
H 32 570380RFz 16* 571325RFz 20* 571330RFz 25 571335RFz 32 571340TH 16* 570460TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480U 16* 570765U 20* 570775U 25* 570780U 32 570785
Multi-Flex ACR H 12* (¼") 570300U 14* (⅜") 570760U 16* (½") 570765U 18* (⅝") 570770U 20* (¾") 570775U 25* (⅞") 570780U 32 (1⅛") 570785
Multi-Flex Gas U 16* (½") 570765U 20* (⅝") 570775U 25* (¾") 570780U 32 (1") 570785U 40 (1¼") 570790U 50 (1½") 570795U 63 (PR-3B)3) (2") 572837 R
U 63 (S) (2") 572365U 75 (PR-3B)3) (2½") 572828 R
Multi-Flex Water U 16* (½") 570765U 25* (¾") 570780U 32 (1") 570785U 40 (1¼") 570790U 50 (1½") 570795U 63 (PR-3B)3) (2") 572837 R
U 63 (S) (2") 572365U 75 (PR-3B)3) (2½") 572828 R
NEUTHERM H 16* 570320MEKUPRESS-HT H 20* 570350
H 26* 570370H 32 570380H 40 (4G) 570390U 40 570790
NIBCO (USA) VUS ½" (OD 15,9 mm) 571770Press System VUS ¾" (OD 22,2 mm) 571775Copper VUS 1" (OD 28,6 mm) 571780
VUS 1¼" (OD 34,9 mm) 571785VUS 1½" (OD 41,3 mm) 571790VUS 2" (OD 54,0 mm) 571795
Nicoll Fluxo TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405TH 75 (PR-3B)3) 572829 R
NUPIGECO U 14* 570760Multinupi U 16* 570765
U 18* 570770U 20* 570775C 26* 570750U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837 R
U 63 (S) 572365NUPIGECO B 16* 570850Multipinza B 18* 570855
B 20* 570860B 26 570870B 32 570880F 16* 570715F 18* 570720F 20* 570725F 26* 570730F 32 570735H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 18* 570770U 20* 570775C 26* 570750U 32 570785
Nussbaum VRX 16 571750Optifl ex-Flowpress VRX 20 571752
VRX 25 571754VRX 32 571756VRX 40 571758
Nussbaum VP 16* 570910Optifl ex Press VP 20* 570915
VP 25* 570920VP 32 570925
Nussbaum V 15 570115Optipress V 18 570125Aquaplus V 22 570135
V 28 570145V 35 570155V 42 570165V 54 570175VF 64,0 (PR-3B)3) 572815 R
VF 76,1 (PR-3B)3) 572816 R
VF 88,9 (PR-3B)3) 572817 R
VF 108,0 (PR-3B)3) 572818 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
Nussbaum V 15 570115Optipress-Gaz V 18 570125
V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175VF 64,0 (PR-3B)3) 572815 R
VF 76,1 (PR-3B)3) 572816 R
VF 88,9 (PR-3B)3) 572817 R
VF 108,0 (PR-3B)3) 572818 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
Nussbaum V 15 570115Optipress-Therm V 18 570125
V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175VF 64,0 (PR-3B)3) 572815 R
VF 76,1 (PR-3B)3) 572816 R
VF 88,9 (PR-3B)3) 572817 R
VF 108,0 (PR-3B)3) 572818 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
O.M.T. - Press TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485
PBTub RFz 12* 571320SERTIPRESS RFz 16* 571325
RFz 20* 571330RFz 25 571335
PBTub M 15 570110SERTI-STEEL M 18 570120
M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
Pegler Yorkshire TH 14* 570455Henco Multilayer TH 16* 570460Solutions TH 18* 570465
TH 20* 570470TH 26* 570475HE 32 571900HE 40 571902
Pegler Yorkshire M 12 570100XPress Carbon M 15 570110
M 181) 570120M 22 570130M 281) 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
Pegler Yorkshire M 12 570100XPress Copper M 15 570110
M 181) 570120M 22 570130M 281) 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
XP 66,7 XL (PR-3S)3) 7)579108 R
M 76,1 XL (PR-3S)3) 7)579101 R
M 88,9 XL (PR-3S)3) 7)579102 R
M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
Pegler Yorkshire M 15 570110XPress Copper M 181) 570120Gas M 22 570130
M 281) 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
Pegler Yorkshire M 15 570110XPress Solar M 181) 570120
M 22 570130M 281) 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
Pegler Yorkshire M 15 570110XPress M 181) 570120Stainless M 22 570130
M 281) 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
REMS pressing tongsREMS pressing rings
163
Accessories for REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC) and suitable radial presses of other makes
System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.Pegler Yorkshire M 15 570110XPress Stainless M 181) 570120Gas M 22 570130
M 281) 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
PERFEXIM U 16* 570765"PERFEKT U 20* 570775SYSTEM" U 25* 570780
U 32 570785PERFILTUBO U 16* 570765PERFILALUPEX U 18* 570770
U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837 R
U 63 (S) 572365U 75 (PR-3B)3) 572828 R
PERFILTUBO M 15 570110PERFILPRESS M 18 570120
M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 76,1 XL (PR-3S)3) 7)579101 R
M 88,9 XL (PR-3S)3) 7)579102 R
M 108,0 XL (PR-3S)3) 7) 579103 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
PEXTUBE RFz 16* 571325PexTube RFz 20* 571330
RFIz 25 571337RFIz 32 571342
Pipelife M 15 570110C-PRESS M 18 570120
M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 76,1 XL (PR-3S)3) 7)579101 R
M 88,9 XL (PR-3S)3) 7)579102 R
M 108,0 XL (PR-3S)3) 7) 579103 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
Pipelife TH 16* 570460RADOPRESS TH 18* 570465
TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S)TH 63 (S) 572405
Pipetec Connect TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S)TH 63 (S) 572405
PLASTICA ALFA TH 16* 570460Multypex TH 20* 570470
TH 26* 570475TH 32 570480
PLASTICA ALFA TH 16* 570460Multypexalfa Gas TH 20* 570470
TH 26* 570475PLASTICA ALFA TH 16* 570460Multypexalfa Gas TH 20* 570470protekprotek TH 26* 570475PLASTICA ALFA TH 16* 570460Multypex Air TH 20* 570470
TH 26* 570475TH 32 570480
PLASTICA ALFA TH 16* 570460Multypex TH 20* 570470Plus TH 26* 570475
TH 32 570480PLASTICA ALFA TH 16* 570460Multypex TH 20* 570470Thermo TH 26* 570475
TH 32 570480PLASTICA ALFA TH 16* 570460Multypex TH 20* 570470Thermo Plus TH 26* 570475
TH 32 570480PLÁSTICOS U 16* 570765FERRO U 20* 570775FERROPLAST U 25* 570780GPF MC PRESS U 32 570785Pressfi ttingMULTICAPAPLÁSTICOS U 16* 570765FERRO U 20* 570775FERROPLAST U 25* 570780GPF PPSU U 32 570785Pressfi tting PE-Xy MULTICAPAy MULTICAPAPLÁSTICOS RFz 16* 571325FERRO RFz 20* 571330FERROPLAST RFz 25 571335GPF PRESS RFz 32 571340Pressfi tting PE-XPressfi tting PE-XPLUMBING PLUS K16/P18* 572600EziPex Crimp K/20* 572605(AUS) K/25* 572610
K32 572615K1/40 572620K1/50 572625
PLUMBING PLUS K16/P18* 572600EziPex Gas K/20* 572605(AUS) K/25* 572610
K32 572615K1/40 572620K1/50 572625
PLUMBING PLUS VAU 15 (OD 12,7 mm) 572687EziPress Gas VAU 20 (OD 19,1 mm) 572689(AUS) VAU 25 (OD 25,4 mm) 572691
VAU 32 (OD 31,8 mm) 572693VAU 40 (OD 38,1 mm) 572695VAU 50 (OD 50,8 mm) 572697VAUF 65 (PR-3B)3) 572839 R
(OD 63,5 mm)
VAUF 80 (PR-3B)3) 572840 R
(OD 76,2 mm)
VAUF 100 (PR-3B)3) 572841 R
(OD 101,6 mm)
PLUMBING PLUS VAU 15 (OD 12,7 mm) 572687EziPress Solar VAU 20 (OD 19,1 mm) 572689(AUS) VAU 25 (OD 25,4 mm) 572691PLUMBING PLUS VAU 15 (OD 12,7 mm) 572687EziPress Water VAU 20 (OD 19,1 mm) 572689(AUS) VAU 25 (OD 25,4 mm) 572691
VAU 32 (OD 31,8 mm) 572693VAU 40 (OD 38,1 mm) 572695VAU 50 (OD 50,8 mm) 572697VAUF 65 (PR-3B)3) 572839 R
(OD 63,5 mm)
VAUF 80 (PR-3B)3) 572840 R
(OD 76,2 mm)
VAUF 100 (PR-3B)3) 572841 R
(OD 101,6 mm)
POLYPIPE TH 10* 570467POLYSURE TH 15* 570457
TH 22* 570472TH 28 570477
POLYSAN M 15 570110Handelsges. M 18 570120m.b.H. & Co KG M 22 570130(Krems/Öster- M 28 570140reich) M 35 570150POLYSAN- M 42 (PR-3S)3) 572706 R
C-Stahl-Press- M 54 (PR-3S)3) 572708 R
System M M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
POLYSAN V 15 570115Handelsges. V 18 570125m.b.H. & Co KG V 22 570135(Krems/Öster- V 28 570145reich) V 35 570155POLYSAN- V 42 570165C-Stahl-Press- V 54 570175System V V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
POLYSAN M 15 570110Handelsges. M 18 570120m.b.H. & Co KG M 22 570130(Krems/Öster- M 28 570140reich) M 35 570150POLYSAN- M 42 (PR-3S)3) 572706 R
Edelstahl M 54 (PR-3S)3) 572708 R
Press-System M 15 45° (PR-2B)3) 574522 R
Gas M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
POLYSAN M 15 570110Handelsges. M 18 570120m.b.H. & Co KG M 22 570130(Krems/Öster- M 28 570140reich) M 35 570150POLYSAN- M 42 (PR-3S)3) 572706 R
Edelstahl M 54 (PR-3S)3) 572708 R
Press-System M 15 45° (PR-2B)3) 574522 R
Wasser M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
REMS pressing tongsREMS pressing rings
Pressfi tting systems for gas installations must only be pressed with pressing tongs/pressing rings which are highlighted in yellow. Observe the national regulations.* These pressing tongs also fi t the manual radial press REMS Eco-Press. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) For this pressfi tting system producing a pressing joint with manual radial presses is not permitted.3) Adapter tongs are required for driving pressing rings (PR), see page 170.4) Press fi ttings made of red bronze (ProPress XL) must be pressed with pressing rings with press contour VUSR, copper fi ttings (ProPress XL-C)
and stainless steel fi ttings (ProPress XL-S) with pressing rings with press contour VUSF. 5) For taking suitable pressing inserts.6) Press fi ttings made of red bronze (Sanpress XL) must be pressed with pressing rings with press contour VR, copper fi ttings (Profi press XL, Profi press G XL),
carbon steel (Prestabo XL) and stainless steel fi ttings (Sanpress Inox XL, Sanpress Inox G XL) with pressing rings with press contour VF.7) Driven by REMS Power-Press XL.The suitability of REMS pressing tools for pressfi tting systems: Date 14.10.2016. For the updated situation regarding suitability status check our website: www.rems.de → Downloads → Product catalogues, brochures → REMS Catalogue.Pressing tongs/pressing rings for additional pressfi tting systems on request.
164
Accessories for REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC) and suitable radial presses of other makes
System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.POLYSAN TH 14* 570455Handelsges. TH 16* 570460m.b.H. & Co KG TH 17* 570462(Krems/Öster- TH 18* 570465reich) TH 20* 570470POLYSAN- TH 26* 570475Press-System TH 32 570480
TH 40 570485TH 50 (S) 572400TH 63 (S) 572405TH 75 (PR-3B)TH 75 (PR-3B)3) 572829 R
POLYSAN TH 14* 570455Handelsges. TH 16* 570460m.b.H. & Co KG TH 17* 570462(Krems/Öster- TH 18* 570465reich) TH 20* 570470POLYSAN-Henco- TH 26* 570475Press-System HE 32 571900
HE 40 571902POLYSAN U 16* 570765(España) U 18* 570770Rainbow U 20* 570775
U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837 R
U 63 (S)U 63 (S) 572365Prandelli H 14* 570310Multyrama Pf H 16* 570320
H 18* 570340H 20* 570350H 26* 570370H 32 570380U 40 570790U 50 570795U 63 (PR-3B)U 63 (PR-3B)3) 572837 R
Prandelli H 16* 570320Multyrama Pfm H 18* 570340
H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 18* 570770U 20* 570775
Raccorderie M 15 570110Metalliche M 18 570120aesPRES1) M 22 570130
M 28 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)M 54 (PR-3S)3) 572708 R
Raccorderie M 15 570110Metalliche M 18 570120inoxPRES1) M 22 570130
M 28 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)M 54 (PR-3S)3) 572708 R
Raccorderie M 15 570110Metalliche M 18 570120steelPRES1) M 22 570130
M 28 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)M 54 (PR-3S)3) 572708 R
RBM Tita-gas TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480
RBM Tita-fi x B 14* 570845B 16* 570850B 18* 570855B 20* 570860B 26 570870F 16* 570715F 18* 570720F 20* 570725H 14* 570310H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380TH 14* 570455TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405U 14* 570760U 16* 570765U 18* 570770U 20* 570775
Redi Nicoll Fluxo TH 14* 570455TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405TH 75 (PR-3B)3) 572829 R
Redi Nicoll Fluxo TH 16* 570460Gas TH 20* 570470
TH 26* 570475RIFENG U U 14* 570760PRESS FITTING U 16* 570765(F5) U 18* 570770
U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (S) 572365U 63 (PR-3B)3) 572837 R
U 75 (PR-3B)3) 572828 R
RIFENG TH TH 16* 570460PRESS FITTING TH 20* 570470(F9) TH 25* 570495
TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405
RIQUIER RFz 12* 571320A SERTIR RFz 16* 571325
RFz 20* 571330RFz 25 571335
Roth RN 14* 572672RN 17* 572674RN 20* 572676RN 25/26 572678RN 32 572680
Roth España - TH 16* 570460Global Plastic TH 18* 570465Rothapress TH 20* 570470
TH 25* 570495TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405
Roth Nordic RN 16 572670Alu-LaserPlus/ RN 20 572676PressCheck2) RN 25/26 572678(DNK-NOR-SWE-FIN) RN 32 572680Rubinetterie M 15 570110Bresciane M 18 570120Bonomi M 22 570130TURBO INOX M 28 570140
M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 76,1 XL (PR-3S)3) 7)579101 R
M 88,9 XL (PR-3S)3) 7)579102 R
M 108,0 XL (PR-3S)3) 7) 579103 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
Rubinetterie M 15 570110Bresciane M 18 570120Bonomi M 22 570130TURBO INOX GASM 28 570140
M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
Rubinetterie M 15 570110Bresciane M 18 570120Bonomi M 22 570130TURBO STEEL M 28 570140
M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 76,1 XL (PR-3S)3) 7)579101 R
M 88,9 XL (PR-3S)3) 7)579102 R
M 108,0 XL (PR-3S)3) 7) 579103 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
Rubinetterie TH 14* 570455Bresciane TH 16* 570460Bonomi TH 18* 570465TURBO PRESS TH 20* 570470
TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405
Rubinetterie TH 16* 570460Bresciane TH 20* 570470Bonomi TH 26* 570475TURBO PRESS TH 32 570480GASSa.MI plastic TH 14* 570455
TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405
Sa.MI plastic TH 16* 570460Multistrato Gas TH 20* 570470
TH 26* 570475TH 32 570480
SANHA B 16* 5708503fi t-Press Pb-free B 20* 570860Serie 25000 B 26 570870
B 32 570880F 16* 570717F 20* 570727F 26* 570730F 32 570735Fz 40 570742Fz 50 570747F 63 (S) 572385H 16* 570320H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405U 16* 570765U 20* 570775C 26* 570750U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837 R
U 63 (S) 572365SANHA B 16* 5708503fi t-Press PPSU B 20* 570860Serie 35000 B 26 570870
B 32 570880F 16* 570717F 20* 570727F 26* 570730F 32 570735H 16* 570320H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405U 16* 570765U 20* 570775C 26* 570750U 32 570785
REMS pressing tongsREMS pressing rings
165
Accessories for REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC) and suitable radial presses of other makes
System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.SANHA-NiroSan SA 15 570935Gas Presssystem SA 18 570940Serie 17000 SA 22 570945
SA 28 570950SA 35 570955M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 76,1 XL (PR-3S)3) 7)579101 R
M 88,9 XL (PR-3S)3) 7)579102 R
M 108,0 XL (PR-3S)3) 7) 579103 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
SANHA-NiroSan SA 15 570935Industry SA 18 570940Presssystem SA 22 570945Serie 18000 SA 28 570950
SA 35 570955M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
XP 64,0 XL (PR-3S)3) 7) 579100 R
M 76,1 XL (PR-3S)3) 7)579101 R
M 88,9 XL (PR-3S)3) 7)579102 R
M 108,0 XL (PR-3S)3) 7) 579103 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
SANHA-NiroSan- SA 15 570935Presssystem SA 18 570940Serie 9000 SA 22 570945
SA 28 570950SA 35 570955M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
XP 64,0 XL (PR-3S)3) 7) 579100 R
M 76,1 XL (PR-3S)3) 7)579101 R
M 88,9 XL (PR-3S)3) 7)579102 R
M 108,0 XL (PR-3S)3) 7) 579103 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
SANHA-NiroSan SA 15 570935SF Presssystem SA 18 570940Serie 19000 SA 22 570945(silicone free) SA 28 570950
SA 35 570955M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 76,1 XL (PR-3S)3) 7)579101 R
M 88,9 XL (PR-3S)3) 7)579102 R
M 108,0 XL (PR-3S)3) 7) 579103 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
SANHA SA 15 570935NiroTherm SA 18 570940Serie 91000 SA 22 570945
SA 28 570950SA 35 570955M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 76,1 XL (PR-3S)3) 7)579101 R
M 88,9 XL (PR-3S)3) 7)579102 R
M 108,0 XL (PR-3S)3) 7) 579103 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
SANHA SA 15 570935NiroTherm SA 18 570940Industry SA 22 570945Serie 98000 SA 28 570950
SA 35 570955M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 76,1 XL (PR-3S)3) 7)579101 R
M 88,9 XL (PR-3S)3) 7)579102 R
M 108,0 XL (PR-3S)3) 7) 579103 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
REMS pressing tongsREMS pressing rings
Pressfi tting systems for gas installations must only be pressed with pressing tongs/pressing rings which are highlighted in yellow. Observe the national regulations.* These pressing tongs also fi t the manual radial press REMS Eco-Press. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) For this pressfi tting system producing a pressing joint with manual radial presses is not permitted.3) Adapter tongs are required for driving pressing rings (PR), see page 170.4) Press fi ttings made of red bronze (ProPress XL) must be pressed with pressing rings with press contour VUSR, copper fi ttings (ProPress XL-C)
and stainless steel fi ttings (ProPress XL-S) with pressing rings with press contour VUSF. 5) For taking suitable pressing inserts.6) Press fi ttings made of red bronze (Sanpress XL) must be pressed with pressing rings with press contour VR, copper fi ttings (Profi press XL, Profi press G XL),
carbon steel (Prestabo XL) and stainless steel fi ttings (Sanpress Inox XL, Sanpress Inox G XL) with pressing rings with press contour VF.7) Driven by REMS Power-Press XL.The suitability of REMS pressing tools for pressfi tting systems: Date 14.10.2016. For the updated situation regarding suitability status check our website: www.rems.de → Downloads → Product catalogues, brochures → REMS Catalogue.Pressing tongs/pressing rings for additional pressfi tting systems on request.
166
Accessories for REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC) and suitable radial presses of other makes
System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.SANHA-Press SA 12 570930Chrom SA 15 570935Serie 16000 SA 18 570940
SA 22 570945SA 28 570950M 12 570100M 15 570110M 18 570120M 22 570130M 28 570140M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
V 12 570107V 15 570115V 18 570125V 22 570135V 28 570145V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)V 28 45° (PR-2B)3) 574510 R
SANHA-Press SA 12 570930GAS Pressfi ttings SA 14 570932Serie 10000/ SA 15 570935Serie 11000 SA 16 570937
SA 18 570940SA 22 570945SA 28 570950SA 35 570955M 12 570100M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)M 54 (PR-3S)3) 572708 R
M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
V 12 570107V 14 570112VG 14 570132V 15 570115V 16 570117VG 16 570137V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502 R
VG 14 45° (PR-2B)3) 574536 R
V 15 45° (PR-2B)3) 574504 R
VG 16 45° (PR-2B)3) 574538 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
SANHA-Press SA 12 570930Pressfi ttings SA 14 570932Serie 6000 SA 15 570935
SA 16 570937SA 18 570940SA 22 570945SA 28 570950SA 35 570955M 12 570100M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
XP 64,0 XL (PR-3S)3) 7) 579100 R
XP 66,7 XL (PR-3S)3) 7)579108 R
M 66,7 XL (PR-3S)3) 7)579107 R
M 76,1 XL (PR-3S)3) 7)579101 R
M 88,9 XL (PR-3S)3) 7)579102 R
M 108,0 XL (PR-3S)3) 7) 579103 R
M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
V 12 570107V 14 570112VG 14 570132V 15 570115V 16 570117VG 16 570137V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502 R
VG 14 45° (PR-2B)3) 574536 R
V 15 45° (PR-2B)3) 574504 R
VG 16 45° (PR-2B)3) 574538 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
SANHA-Press SA 12 570930SOLAR SA 15 570935Pressfi ttings SA 18 570940Serie 12000/ SA 22 570945Serie 13000 SA 28 570950
SA 35 570955M 12 570100M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
XP 64,0 XL (PR-3S)3) 7) 579100 R
XP 66,7 XL (PR-3S)3) 7)579108 R
M 66,7 XL (PR-3S)3) 7)579107 R
M 76,1 XL (PR-3S)3) 7)579101 R
M 88,9 XL (PR-3S)3) 7)579102 R
M 108,0 XL (PR-3S)3) 7) 579103 R
M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
V 12 570107V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
SANHA SA 12 570930PURAPRESS SA 14 570932Serie 8000 SA 15 570935
SA 16 570937SA 18 570940SA 22 570945SA 28 570950SA 35 570955M 12 570100M 151) 570110M 181) 570120M 221) 570130M 281) 570140M 351) 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
XP 64,0 XL (PR-3S)3) 7) 579100 R
XP 66,7 XL (PR-3S)3) 7)579108 R
M 66,7 XL (PR-3S)3) 7)579107 R
M 76,1 XL (PR-3S)3) 7)579101 R
M 88,9 XL (PR-3S)3) 7)579102 R
M 108,0 XL (PR-3S)3) 7) 579103 R
M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
V 12 570107V 14 570112VG 14 570132V 15 570115V 16 570117VG 16 570137V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502 R
VG 14 45° (PR-2B)3) 574536 R
V 15 45° (PR-2B)3) 574504 R
VG 16 45° (PR-2B)3) 574538 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
SANHA-Therm SA 12 570930Serie 24000 SA 15 570935
SA 18 570940SA 22 570945SA 28 570950SA 35 570955M 12 570100M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
XP 66,7 XL (PR-3S)3) 7)579108 R
M 66,7 XL (PR-3S)3) 7)579107 R
M 76,1 XL (PR-3S)3) 7)579101 R
M 88,9 XL (PR-3S)3) 7)579102 R
M 108,0 XL (PR-3S)3) 7) 579103 R
M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
V 12 570107V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
SANHA-Therm SA 12 570930Industry SA 15 570935Serie 28000 SA 18 570940
SA 22 570945SA 28 570950SA 35 570955M 12 570100M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
XP 66,7 XL (PR-3S)3) 7)579108 R
M 66,7 XL (PR-3S)3) 7)579107 R
M 76,1 XL (PR-3S)3) 7)579101 R
M 88,9 XL (PR-3S)3) 7)579102 R
M 108,0 XL (PR-3S)3) 7) 579103 R
M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
V 12 570107V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
SANPRO TH 16* 570460THPRESS TH 20* 570470
TH 26* 570475TH 32 570480
SATEC SK VITerm TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480U 40 570790U 50 570795U 63 (S)U 63 (S) 572365
Schwer Fittings M 12 570100AQUApress M 15 570110
M 18 570120M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
REMS pressing tongsREMS pressing rings
167
Accessories for REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC) and suitable radial presses of other makes
System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.Seppelfricke V 12 570107VSH SudoPress V 15 570115C-Stahl V 18 570125Visu-Control V 22 570135
V 28 570145V 35 570155V 42 570165V 54 570175
Seppelfricke V 15 570115VSH SudoPress V 18 570125Edelstahl V 22 570135Visu-Control V 28 570145
V 35 570155V 42 570165V 54 570175
Seppelfricke V 12 570107VSH SudoPress V 15 570115Kupfer V 18 570125Visu-Control V 22 570135
V 28 570145V 35 570155V 42 570165V 54 570175
Seppelfricke V 15 570115VSH SudoPress V 18 570125Kupfer Gas V 22 570135Visu-Control V 28 570145
V 35 570155V 42 570165V 54 570175
Seppelfricke V 15 570115VSH SudoPress V 18 570125Kupfer Solar V 22 570135Visu-ControlSeppelfricke TH 14* 570455SkinPress TH 16* 570460Visu-Control TH 18* 570465
TH 20* 570470TH 26* 570475THL 32 570487TH 40 570485TH 50 (S) 572400TH 63 (S)TH 63 (S) 572405
Seppelfricke M 12 570100VSH XPress M 15 570110C-Stahl M 181) 570120
M 22 570130M 281) 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
Seppelfricke M 15 570110VSH XPress M 181) 570120Edelstahl M 22 570130
M 281) 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
Seppelfricke M 15 570110VSH XPress M 181) 570120Edelstahl Gas M 22 570130
M 281) 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)M 54 (PR-3S)3) 572708 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
Seppelfricke M 12 570100VSH XPress M 15 570110Kupfer M 181) 570120
M 22 570130M 281) 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
Seppelfricke M 15 570110VSH XPress M 181) 570120Kupfer Gas M 22 570130
M 281) 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)M 54 (PR-3S)3) 572708 R
SESTA TH 14* 570455SESTA GAS TH 16* 570460
TH 20* 570470TH 26* 570475TH 32 570480
SESTA H 16* 570320Sistema H 20* 570350multistrato TH 14* 570455
TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405U 16* 570765U 20* 570775
SLOVARM U 16* 570765PEX-THERM U 20* 570775
H 26* 570370U 32 570785H 16* 570320H 20* 570350H 26* 570370H 32 570380
SOMATHERM H 16* 570320MULTI’X H 20* 570350
H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775U 32 570785
SOMATHERM H 12* 570300SomaPRESS H 16* 570320
H 20* 570350H 25* 570360RFz 12* 571320RFz 16* 571325RFz 20* 571330RFz 25 571335U 16* 570765U 20* 570775U 25* 570780
STANDARD U 16* 570765HIDRAULICA U 18* 570770MultiStandard U 20* 570775
U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837 R
U 63 (S)U 63 (S) 572365
STELBI H 16* 570320Polikraft H 20* 570350
H 26* 570370TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405U 16* 570765U 20* 570775
STELBI TH 16* 570460Stelgas TH 20* 570470
TH 26* 570475STPC STPEX TH 16* 570460
TH 20* 570470TH 26* 570475
Systerm H 16 A* 570620WELCO-Gas H 20 A* 570650
H 26 A* 570670H 32 A 570680
Systerm H 14 A* 570610WELCO-Flex H 16 A* 570620
H 17 A* 570630H 20 A* 570650H 26 A* 570670H 32 A 570680H 40 A (4G)H 40 A (4G) 570695
Systerm H 16 A* 570620WELCO-Teck H 20 A* 570650
H 26 A* 570670TDM BRASS H 16* 570320Serie 1600 H 18* 570340
H 20* 570350H 25* 570360H 26* 570370H 32 570380TH 16* 570460TH 18* 570465TH 20* 570470TH 25* 570495TH 26* 570475THL 32 570487TH 40 570485TH 50 (S) 572400TH 63 (S) 572405U 16* 570765U 18* 570770U 20* 570775U 25* 570780C 26* 570750U 32 570785
TDM BRASS TH 16* 570460Serie 1700 (Gas) TH 20* 570470
TH 26* 570475THL 32 570487
TERMICALINE B 16* 570850Termipex B 20* 570860
B 26 570870B 32 570880H 16* 570320H 20* 570350TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775
TermoConcept Basic E015) 571855TC-PRESSTHERMOLUTZ H 14* 570310
H 16* 570320TH 20* 570470
TE-SA TH 14* 570455TE-SA press TH 16* 570460serie 800 TH 18* 570465
TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S)TH 63 (S) 572405
REMS pressing tongsREMS pressing rings
Pressfi tting systems for gas installations must only be pressed with pressing tongs/pressing rings which are highlighted in yellow. Observe the national regulations.* These pressing tongs also fi t the manual radial press REMS Eco-Press. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) For this pressfi tting system producing a pressing joint with manual radial presses is not permitted.3) Adapter tongs are required for driving pressing rings (PR), see page 170.4) Press fi ttings made of red bronze (ProPress XL) must be pressed with pressing rings with press contour VUSR, copper fi ttings (ProPress XL-C)
and stainless steel fi ttings (ProPress XL-S) with pressing rings with press contour VUSF. 5) For taking suitable pressing inserts.6) Press fi ttings made of red bronze (Sanpress XL) must be pressed with pressing rings with press contour VR, copper fi ttings (Profi press XL, Profi press G XL),
carbon steel (Prestabo XL) and stainless steel fi ttings (Sanpress Inox XL, Sanpress Inox G XL) with pressing rings with press contour VF.7) Driven by REMS Power-Press XL.The suitability of REMS pressing tools for pressfi tting systems: Date 14.10.2016. For the updated situation regarding suitability status check our website: www.rems.de → Downloads → Product catalogues, brochures → REMS Catalogue.Pressing tongs/pressing rings for additional pressfi tting systems on request.
168
Accessories for REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC) and suitable radial presses of other makes
System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.TIEMME TH 14* 570455AL-COBRAPEX TH 16* 570460Serie 1650 TH 18* 570465
TH 20* 570470TH 25* 570495TH 26* 570475THL 32 570487TH 40 570485TH 50 (S) 572400TH 63 (S)TH 63 (S) 572405
TIEMME RFz 12* 571320Serie 1700 PE-X RFz 16* 571325a pressare RFz 20* 571330
RFz 25 571335RFz 32 571340
TIEMME TH 16* 570460TIEMME Gas TH 20* 570470
TH 26* 570475THL 32 570487
TIGRE TH 16* 570460ALPEX GÁS TH 20* 570470
TH 26* 570475TH 32 570480
TKM TH 14* 570455Systemtechnik TH 16* 570460
TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S)TH 63 (S) 572405
TRA U 16* 570765MULTITRAPRESS U 18* 570770
U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837 R
U 63 (S)U 63 (S) 572365TRA TRAPRESS H 12* 570300
H 16* 570320H 20* 570350H 25* 570360H 32 570380RFz 12* 571320RFz 16* 571325RFz 20* 571330RFz 25 571335RFz 32 571340
TWEETOP U 16* 570765U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837 R
U 63 (S) 572365U 75 (PR-3B)U 75 (PR-3B)3) 572828 R
UNICAL AG U 16* 570765MAX-MULTIPEX U 20* 570775
H 26* 570370U 32 570785
UNIDELTA TH 16* 570460DeltAll TH 20* 570470
TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405H 16* 570320H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390U 16* 570765U 20* 570775U 32 570785U 40 570790U 50 570795U 63 (S)U 63 (S) 572365
UNIDELTA TH 16* 570460DeltAll GAS TH 20* 570470
TH 26* 570475TH 32 570480H 16* 570320H 20* 570350H 26* 570370H 32 570380U 16* 570765U 20* 570775U 32 570785
Uponor MLC UP 14* 572630UP 16* 572632UP 18* 572634UP 20* 572636UP 25 572638UP 32 572640U 40 570790U 50 570795U 63 (PR-3B)3) 572837 R
U 63 (S) 572365U 75 (PR-3B)U 75 (PR-3B)3) 572828 R
Uponor MLC-D UP 16* 572632UP 20* 572636UP 25 572638UP 32 572640U 50 570795U 63 (PR-3B)3) 572837 R
U 63 (S) 572365U 75 (PR-3B)U 75 (PR-3B)3) 572828 R
Uponor MLC-G2) UP 202) 572636UP 25 572638UP 32 572640
Uponor UP 16* 572632Uni Pipe PLUS UP 20* 572636
UP 25 572638UP 32 572640
Valsir PEXAL H 14* 570310H 16* 570320H 20* 570350H 26* 570370H 32 V 570685H 40 V (PR-3B)3) 572833 R
H 50 V (PR-3B)3) 572834 R
H 63 V (PR-3B)H 63 V (PR-3B)3) 572835 R
Valsir PEXAL Gas H 14* 570310H 16* 570320H 20* 570350H 26* 570370
Van Marcke Log. TH 16* 570460Tubipex TH 17* 570462
TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405TH 75 (PR-3B)TH 75 (PR-3B)3) 572829 R
Van Marcke Log. M 12 570100Tubipress M 15 570110
M 18 570120M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 76,1 XL (PR-3S)3) 7)579101 R
M 88,9 XL (PR-3S)3) 7)579102 R
M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)M 35 45° (PR-2B)3) 574530 R
Variotherm TH 11,6* 570482System TH TH 16* 570460
TH 20* 570470Viega VX 12* 571630Fonterra VP 14/15* 570905
VP 16/17* 570910VP 20* 570915VP 25 570920
Viega Pexfi t VX 16* 571635VX 20* 571640VX 25* 571645
Viega Pexfi t G VX 16* 571635VX 20* 571640VX 25* 571645
Viega Prestabo V 12 570107V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175VF 64,0 (PR-3B)3) 6) 572815 R
VF 76,1 (PR-3B)3) 6) 572816 R
VF 88,9 (PR-3B)3) 6) 572817 R
VF 108,0 (PR-3B)3) 6) 572818 R
V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
Viega Profi press V 12 570107VG 14 570132V 15 570115VG 16 570137V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175VF 64,0 (PR-3B)3) 6) 572815 R
VF 76,1 (PR-3B)3) 6) 572816 R
VF 88,9 (PR-3B)3) 6) 572817 R
VF 108,0 (PR-3B)3) 6) 572818 R
V 12 45° (PR-2B)3) 574502 R
VG 14 45° (PR-2B)3) 574536 R
V 15 45° (PR-2B)3) 574504 R
VG 16 45° (PR-2B)3) 574538 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
Viega V 12 570107Profi press G V 15 570115
V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175VF 64,0 (PR-3B)3) 6) 572815 R
V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
Viega V 12 570107Profi press S V 15 570115
V 18 570125V 22 570135V 28 570145V 35 570155V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
Viega V 12 570107Profi press Therm V 15 570115
V 18 570125V 22 570135V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)V 22 45° (PR-2B)3) 574508 R
Viega ProPress VUS ½" (OD 15,9 mm) 571770System USA VUS ¾" (OD 22,2 mm) 571775
VUS 1" (OD 28,6 mm) 571780VUS 1¼" (OD 34,9 mm) 571785VUS 1½" (OD 41,3 mm) 571790VUS 2" (OD 54,0 mm) 571795
XL-C/XL-S VUSF 2½" (PR-3B)3) 6)572819 R
(OD 66,7 mm)
XL-C/XL-S VUSF 3" (PR-3B)3) 6) 572820 R
(OD 79,4 mm)
XL-C/XL-S VUSF 4" (PR-3B)3) 6) 572821 R
(OD 104,8 mm)
Viega Propress VAU 15 (OD 12,7 mm) 572687WATER System VAU 20 (OD 19,1 mm) 572689AUS VAU 25 (OD 25,4 mm) 572691
VAU 32 (OD 31,8 mm) 572693VAU 40 (OD 38,1 mm) 572695VAU 50 (OD 50,8 mm) 572697
Viega PropressG VAU 15 (OD 12,7 mm) 572687GAS System VAU 20 (OD 19,1 mm) 572689AUS VAU 25 (OD 25,4 mm) 572691
VAU 32 (OD 31,8 mm) 572693VAU 40 (OD 38,1 mm) 572695VAU 50 (OD 50,8 mm) 572697
Viega Raxinox VRX 16 571750VRX 20 571752
Viega Raxofi x VRX 16 571750VRX 20 571752VRX 25 571754VRX 32 571756VRX 40 571758VRX 50 571760
Viega Sanfi x2) VP 16/17* 570910VP 20* 570915VP 25* 570920VP 32 570925
Viega Sanpress V 12 570107V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175VR 76,1 (PR-3B)3) 6) 572822 R
VR 88,9 (PR-3B)3) 6) 572823 R
VR 108,0 (PR-3B)3) 6) 572824 R
V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
Viega V 15 570115Sanpress Inox V 18 570125
V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175VF 64,0 (PR-3B)3) 6) 572815 R
VF 76,1 (PR-3B)3) 6) 572816 R
VF 88,9 (PR-3B)3) 6) 572817 R
VF 108,0 (PR-3B)3) 6) 572818 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
REMS pressing tongsREMS pressing rings
169
Accessories for REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC) and suitable radial presses of other makes
System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.Viega V 15 570115Sanpress Inox G V 18 570125
V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175VF 64,0 (PR-3B)3) 6) 572815 R
VF 76,1 (PR-3B)3) 6) 572816 R
VF 88,9 (PR-3B)3) 6) 572817 R
VF 108,0 (PR-3B)VF 108,0 (PR-3B)3) 6) 572818 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)V 35 45° (PR-2B)3) 574512 R
Viessmann TH 14* 570455TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485
VINSAR TH 16* 570460PEX-AL-PEX TH 20* 570470
TH 26* 570475TH 32 570480
VSH MultiPress U 14* 570760U 16* 570765U 20* 570775U 25* 570780U 32 570785U 40 570790
VSH V 12 570107SudoPress Carbon V 15 570115
V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175
VSH V 12 570107SudoPress Copper V 14 570112
V 15 570115V 16 570117V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175
VSH V 12 570107SudoPress V 14 570112Copper Gas V 15 570115
V 16 570117V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175
VSH V 14 570112SudoPress V 15 570115Copper Solar V 16 570117
V 18 570125V 22 570135
VSH V 15 570115SudoPress V 18 570125Stainless V 22 570135
V 28 570145V 35 570155V 42 570165V 54 570175
VSH TH 14* 570455SkinPress TH 16* 570460
TH 18* 570465TH 20* 570470TH 26* 570475THL 32 570487TH 40 570485TH 50 (S) 572400TH 63 (S)TH 63 (S) 572405
VSH TH 16* 570460SkinPress Gas TH 20* 570470
TH 26* 570475THL 32 570487
VSH M 12 570100XPress Carbon M 15 570110
M 181) 570120M 22 570130M 281) 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
VSH M 12 570100XPress Copper M 15 570110
M 181) 570120M 22 570130M 281) 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
VSH M 15 570110XPress Copper M 181) 570120GAS M 22 570130
M 281) 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
VSH M 15 570110XPress Copper M 181) 570120Solar M 22 570130
M 281) 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
VSH M 15 570110XPress Stainless M 181) 570120
M 22 570130M 281) 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
VSH M 15 570110XPress Stainless M 181) 570120Gas M 22 570130
M 281) 570140M 35 570150M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
Walter Meier U 16* 570765Metalplast U 18* 570770
U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837 R
U 63 (S) 572365U 75 (PR-3B)U 75 (PR-3B)3) 572828 R
Watts MTR TH 16* 570460Art press TH 20* 570470
TH 26* 570475TH 32 570480
WATTS US ⅜"* 571450RADIANT US ½"* 571455Watts WaterPEX US ¾"* 571460
US 1"* 571465US 1 ¼" 571470US 1 ½" 571475
WATTS US ⅜"* 571450RADIANT US ½"* 571455Watts US ¾"* 571460RadiantPEX US 1"* 571465
US 1 ¼" 571470US 1 ½" 571475
WATTS U 16 (½") 570765RADIANT U 20 (⅝") 570775Watts U 25 (¾") 570780RadiantPEX-AL U 32 (1")U 32 (1") 570785Wavin U 14* 570760Tigris K1 U 16* 570765
U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795
Wavin U 14* 570760Tigris M1 U 16* 570765
U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795
WeeConPress M 12 570100Alu M 15 570110
M 18 570120M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
V 12 570107V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502 R
V 15 45° (PR-2B)3) 574504 R
V 18 45° (PR-2B)3) 574506 R
V 22 45° (PR-2B)3) 574508 R
V 28 45° (PR-2B)3) 574510 R
V 35 45° (PR-2B)3) 574512 R
SA 12 570930SA 15 570935SA 18 570940SA 22 570945SA 28 570950SA 35 570955
REMS pressing tongsREMS pressing rings
Pressfi tting systems for gas installations must only be pressed with pressing tongs/pressing rings which are highlighted in yellow. Observe the national regulations.* These pressing tongs also fi t the manual radial press REMS Eco-Press. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) For this pressfi tting system producing a pressing joint with manual radial presses is not permitted.3) Adapter tongs are required for driving pressing rings (PR), see page 170.4) Press fi ttings made of red bronze (ProPress XL) must be pressed with pressing rings with press contour VUSR, copper fi ttings (ProPress XL-C)
and stainless steel fi ttings (ProPress XL-S) with pressing rings with press contour VUSF. 5) For taking suitable pressing inserts.6) Press fi ttings made of red bronze (Sanpress XL) must be pressed with pressing rings with press contour VR, copper fi ttings (Profi press XL, Profi press G XL),
carbon steel (Prestabo XL) and stainless steel fi ttings (Sanpress Inox XL, Sanpress Inox G XL) with pressing rings with press contour VF.7) Driven by REMS Power-Press XL.The suitability of REMS pressing tools for pressfi tting systems: Date 14.10.2016. For the updated situation regarding suitability status check our website: www.rems.de → Downloads → Product catalogues, brochures → REMS Catalogue.Pressing tongs/pressing rings for additional pressfi tting systems on request.
170
Accessories for REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC) and suitable radial presses of other makes
AccessoriesAccessories
Description Art.-No.Adapter tongs Z1 for driving REMS pressing rings 45° (PR-2B) 574500 R
Adapter tongs Z2 for driving REMS pressing rings M 42 – 54 (PR-3S) 572795 RX
Adapter tongs Z4 for driving REMS pressing rings F 75 (PR-3B), TH 63 – 75 (PR-3B), U 63 – 75 (PR-3B) 572801 RX
Adapter tongs Z5 for driving REMS pressing rings VF/VR 64 – 108 (PR-3B), VUSF/VUSR 2½ – 4" (PR-3B), VAUF 65 – 100 (PR-3B) 572802 RX
Adapter tongs Z6 XL for driving REMS pressing rings XL 64,0 – 108,0 (PR-3S) with REMS Power-Press XL 579120 R
Steel case with insert for 6 pressing tongs (up to Ø 35 mm/1" and pressing tongs U 40, U 50, TH 40, F 40, F 50, G 40, VUS 1¼")/cropping tongs and compartment for pipe cutter up to 42 mm 570295 R
Steel case with insert for 2 pressing tongs (M 42 (4G), M 54 (4G), V 42, V 54, H 40, H 40 A, VUS 1½", VUS 2") 570290 R
Steel case with insert for adapter tongs with pressing rings M 42 (PR-3S) and M 54 (PR-3S) or with pressing rings SA 42 (PR-3S) and M 54 (PR-3S). 572810 R
Steel case with inlay for adapter tongs and 4 pressing rings VF 64,0 – 108,0/VR 76,1 – 108,0/VUSF 2½ – 4"/VUSR 2½ – 4" (PR-3B) 572809 R
Steel case with insert for adapter tongs Mini Z1 and adapter tongs Z1 and 6 REMS pressing rings V 12 – 35 45° (PR-2B) or M 12 – 35 45° (PR-2B) 574516 R
REMS pressing tongsREMS pressing rings
System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.WeeConPress M 12 570100C-Stahl M 15 570110
M 18 570120M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
WeeConPress M 12 570100Inox M 15 570110
M 18 570120M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
WeeConPress M 12 570100Kupfer M 15 570110
M 18 570120M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706 R
M 54 (PR-3S)3) 572708 R
M 12 45° (PR-2B)3) 574520 R
M 15 45° (PR-2B)3) 574522 R
M 18 45° (PR-2B)3) 574524 R
M 22 45° (PR-2B)3) 574526 R
M 28 45° (PR-2B)3) 574528 R
M 35 45° (PR-2B)3) 574530 R
WeeConFlex H 16* 570320MVR H 20* 570350
H 26* 570370H 32 570380U 40 570790U 50 570795U 63 (PR-3B)3) 572837 R
U 63 (S) 572365TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405
WEM U 16* 570765WIELAND TH 142) 570455cuprotherm TH 162) 570460CTX2) TH 182) 570465
TH 202) 570470TH 262) 570475
WKS-Press TH 14* 570455TH 16* 570460TH 17* 570462TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485
WÜRTH TH 16* 570460Würth TH 20* 570470
TH 26* 570475HE 32 571900HE 40 571902
XtraConnect F 16* 570717F 20* 570727F 26* 570730F 32 570735H 16* 570320H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775
(DN 26) U 25* 570780U 32 570785VP 16* 570910VP 20* 570915VP 32 570925
Zetaesse TH 14* 570455Multistrato TH 16* 570460EUROPEX TH 18* 570465
TH 20* 570470TH 26* 570475TH 32 570480U 14* 570760U 16* 570765U 18* 570770U 20* 570775
Zetaesse TH 14* 570455Multistrato TH 16* 570460ISOPEX TH 18* 570465
TH 20* 570470TH 26* 570475TH 32 570480U 14* 570760U 16* 570765U 18* 570770U 20* 570775
Zetaesse Rame TH 14* 570455HydroSAN TH 16* 570460
TH 20* 570470U 14* 570760U 16* 570765U 20* 570775
Zetaesse Rame TH 14* 570455ThermoSAN TH 16* 570460
TH 20* 570470U 14* 570760U 16* 570765U 20* 570775
ZEWOTHERM TH 12* 570452TH 16* 570460TH 17* 570462TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405
ZURN US ⅜"* 571450INDUSTRIES US ½"* 571455ZURN PEX US ¾"* 571460
US 1"* 571465US 1 ¼" 571470US 1 ½" 571475US 2 ” 571477
Eign
ungsprüfung
nach DVGW G 5614/V
P 6
25
171
Confi rmation of suitabilityThe suitability of crimping tools is determined basically by the manufacturer of crimping tools. Moreover the suitability of REMS crimping tools has been con-fi rmed by the system manufacturer/supplier himself or approved through independent testing institutes.
Confi rmation of suitability through the system manufacturer/supplierMore than 90 % of the manufacturers/suppliers of the pressfi tting systems listed herein have tested REMS pressing tongs and confi rmed the suitability for their pressfi tting system.
Confi rmation of suitability through independent testing institutesThe suitability of REMS pressing tongs for additional pressfi tting systems have been confi rmed through independent technical institutes:
TÜV-Certifi catesExist for Geberit Mepla, Geberit Mapress C-STAHL, Geberit Mapress EDELSTAHL, Geberit Mapress Kupfer, Nussbaum Cupress, Nussbaum Optipress, Uponor Unipipe, Viega-’profi press’, Viega-’profi press G’, Viega-’sanfi x P’, Viega-’sanpress’, Viega-’Viegatherm P’, Wavin Tigris. The TÜV-certifi cates confi rm that REMS crimping tools are suitable for producing perfect and system-conformity pressing joints corresponding to these systems.
Suitability test according to DVGW W 534 (potable water)Pressing joints produced with REMS pressing tools were tested by the state-operated material testing institute in Darmstadt/Germany or the material testing institute of the Land of North-Rhine-Westphalia, Germany according to DVGW work sheet W 534. These material testing institutes are certifi ed by the DVGW for making these tests. A representative cross-section of press joints of press fi tting systems Geberit Mapress Edelstahl, Raccorderie Metalliche inoxPRES, Raccord-erie Metalliche steelPRES, Uponor Unipipe, Viega Profi press and Viega Raxofi x. was tested. The tests led to the result that all REMS pressing tools are suitable for producing perfect and system conformity pressing joints in accordance with these systems.
Suitability test according to DVGW G 5614 / VP 625 or prEN 1254-7 (gas)Pressing joints made with REMS pressing tools have been tested by the TÜV or by the Land Material Testing Institute Nordrhein-Westfalen or the DVGW Research Institute Karlsruhe according to DVGW Regulations G 5614 / VP 625 or by the BSI (UK) according to prEN 1254-7. A representative cross-section of pressing joints of the pressfi tting systems Geberit Mapress Edelstahl Gas, Geberit Mapress Kupfer Gas, Henco Gas, IBP >B<press Gas, Kembla KemPress Gas, Pegler Yorkshire X-Press Copper Gas, Raccorderie Metalliche inoxPRES Gas, Uponor MLC-G, Valsir PEXAL Gas, Viega Profi press G, Viega Pexfi t G, Viega Sanpress INOX G, Viega PropressG GAS System (AUS) was tested. The tests led to the result that all REMS pressing tools are suitable for producing perfect and system conformity pressing joints in accordance with these systems.
potable water
gas
ZVSHK
172
Hold-Harmless and Indemnifi cation AgreementREMS is the fi rst system-independent machine and tool manufacturer to sign liability acceptance agreements for pressing tools.A hold-harmless and indemnifi cation agreement exists with the:
Zentralverband Sanitär Heizung Klima (Central Organization for the Sanitary-, Heating- and Climatization Industries),Rathausallee 6, D-53757 St. Augustin,referred to in the following as ”ZVSHK”,
Bundesindustrieverband Technische Gebäudeausrüstung e.V.,Hinter Hoben 149, 53129 Bonn,referred to in the following as ”BTGA”,
Verband Deutscher Kälte-Klima-Fachbetriebe e. V. (German Association for Coolant & Air-Conditioning Profession Industries), Kaiser-Friedrich-Straße 7, D-53113 Bonn,referred to in the following as ”VDKF”,
Schweizerisch-Liechtensteinischem Gebäudetechnikverband (Swiss-Liechtenstein Technical Building Association),Auf der Mauer 11, CH-8023 Zürich,referred to in the following as ”suissetec”,
The Zentralverband Sanitär Heizung Klima (ZVSHK), the Bundesindustrieverband Technische Gebäudeausrüstung e. V. (BTGA), the Verband Deutscher Kälte-Klima-Fachbetriebe e. V. (VDKF) and the Schweizerisch-Liechtensteinische Gebäude-technikverband (suissetec) have made liability acceptance agreements in the interests of trade and industry with REMS GmbH & Co KG (REMS) for the radial pressing tools.
■ Manual radial press REMS Eco-Press■ Cordless radial press REMS Mini-Press ACC■ Cordless radial press REMS Mini-Press 22 V ACC■ Electric radial press REMS Power-Press SE■ Electro-hydraulic radial press REMS Power-Press■ Electro-hydraulic radial press REMS Power-Press ACC■ Electro-hydraulic radial press REMS Power-Press XL ACC■ Cordless radial press REMS Akku-Press■ Cordless radial press REMS Akku-Press ACC■ REMS pressing tongs■ REMS pressing rings■ REMS pressing tongs Mini
This makes REMS the fi rst system-independent machine- and tool manufacturer to have concluded a hold-harmless and indemnifi cation agreement for pressing tools. The conclusion of the agreement was effected on the basis of a successful cooperation established on partnership between REMS, the crafts, trades and industry and their organizations.
Eligible for services and performances from this agreement are all independent professional craftsmen, and companies of such, who are enrolled in the register of artisans and craftsmen (referred to in the following as ”SHK-Establishments”), in as far as they have been members of the crafts guild of the sanitary- heating- and climatization enterprises competent for their business location at the time the damage event has arisen, and this crafts guild is associated with a regional guild asso ciation, which is a member of the ZVSHK.
Entitled to the services from the agreement with the BTGA are all building tech-nology companies (hereinafter referred to as “TGA companies” ) insofar as they were a member of the Bundesindustrieverband Technische Gebäudeausrüstung responsible at the seat of their company at the time of the damage case and therefore an indirect member of the BTGA or direct member of the BTGA.
Eligible for services and performances from this agreement with the VDKF are all coolant systems companies or professional organisations (referred to as Coolant and Air-Conditioning Profession Industries) who, at the time the damage is caused, are members of the VDKF.
Eligible for services and performances from this agreement are all building systems companies (following TGA companies) who, at the time the damaged is caused, are members of suissetec.
In as far as the radial pressing tools mentioned show a defect with regard to construction, manufacture or material, or if the operator’s manuals are faulty, thereby causing damage for the customer of the SHK-establishment, the Coolant and Air-Conditioning Profession Industries, or the TGA-companies, for which the SHK-establishment or the TGA-company is liable, then REMS shall be additionally liable - aside of the statutory prescriptions – for the consequences resulting from leakage, in accordance with the stipulations and provisions of this hold-harmless agreement.
The hold-harmless and indemnifi cation agreement shall be independently valid, regardless of which pressfi tting system is pressed with the REMS pressing tools. The current status regarding suitability of the REMS pressing tools for pressfi tting systems can be viewed on the Internet: www.rems.de → Downloads → Product catalogues, brochures → REMS Catalogue.
Please consult Mr. Walter Hindelang for further information: [email protected].
Reliable and safe: REMS was the fi rst system-independent machine and tool manufacturer to sign liability acceptance agreements for pressing tools as early as the year 2000.
German Quality ProductGerman Quality Product
173
REMS cropping tongs
REMS cable shear
Accessories for REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC) and suitable radial presses of other makes
Accessories for REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC) and suitable radial presses of other makes
German Quality ProductGerman Quality Product
German Quality ProductGerman Quality Product
High performance cropping tongs in forged and specially hardened steel for cutting threaded rods.Steel, stainless steel up to hardness classifi cation 4.8 (400 N/mm2) M 6 – M 12
REMS cropping tongs – for cutting threaded rods. Made of forged and specially hardened steel. Reversible cropping inserts for double service life.M cropping inserts with high precision thread contour machined on CNC machining centres for exact guiding of the threaded rod in the cutting process Pliers parts, cropping inserts and specially machined and hardened cutting edges, made to fi t exactly, for cutting without burr Threaded rod can be screwed into a threaded connection of the pipe clip or the nut without rework after cutting Cutting device in pliers design (Patent EP 1 459 825, patent US 7,284,330). Drive through all REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC) and through suitable radial presses of other makes. All cropping tongs marked with * have an optional connection (Patent EP 1 223 008, patent US 6,739,172) for manual drive through the radial press REMS Eco-Press.
High-grade cable shear in forged and specially hardened steel for cutting electric cable.Electric cable ≤ 300 mm² (Ø 30 mm)
REMS cable shear – Easy cutting of electric cable. Made of forged and specially hardened steel. Replaceable cutting blades manufactured on CNC production centres ensure a precision blade geometry and long service life. Large cutting range.Drive through electric REMS radial presses (except for REMS Mini-Press ACC, REMS Mini-Press 22 V ACC) and through suitable radial presses of other makes.
AccessoriesAccessories
Description for threaded rods Art.-No.Cropping inserts M 6 (pair) M 6 571891Cropping inserts M 8 (pair) M 8 571896Cropping inserts M 10 (pair) M 10 571866Cropping inserts M 12 (pair) M 12 571871Steel case with insert for 6 cropping tongs/pressing tongs and compartment for pipe cutter up to 42 mm 570295 R
Supply formatREMS cropping tongs. Cropping tongs with 1 pair of reversible cropping inserts for steel, stainless steel, M 6 – M 12. In a carton.Description for threaded rods Art.-No.REMS cropping tongs M 6* M 6 571890REMS cropping tongs M 8* M 8 571895REMS cropping tongs M 10 M 10 571865REMS cropping tongs M 12 M 12 571870
Supply formatREMS cable shear. Cable shears with 2 changeable cable cutters for electric cables ≤ 300 mm² (Ø 30 mm). In a carton.
Art.-No.571887
AccessoriesAccessories
Description Art.-No.Cable cutters (pack of 2) 571889 R02
Patent EP 1 223 008Patent US 6,739,172Patent EP 1 459 825Patent US 7,284,330