quantity surveying divisionrism.org.my/wp-content/uploads/2014/10/rism-qs-qualifications.pdf ·...

3rd Floor, Bangunan Juruukur, 64 – 66, Jalan 52/4, 46200 Petaling Jaya, Selangor, Malaysia Tel: 03-7954 8358 (Hunting Line) / 7955 1773 / 7956 9728 Fax: 03-7955 0253

Website : www.rism.org.my E-mail : [email protected]

Quantity Surveying Division

As at: November 2012

http://www.rism.org.my/

Note : (*) Applicants without the required 3 credits at SPM level, may have the following for

consideration:-

(a) STPM/A Levels (b) UEC (c) Foundation Programme – Higher National Diploma/Polytechnic However, the subjects must be different from the credits obtained under SPM level. The

1119 English paper to be considered as equivalent to the English Language paper of the

SPM level.

(^) Student members with only these qualifications are required to sit the Foundation or First

Examinations set by ISM.

Amended as at 30 November 2012-QS/2

1.10 Kolej Inti, Sarawak (INTI College, Sarawak

1.10.1 Diploma in Quantity Surveying (from 13/2/2006 till 12/2/2011)

1.11 Kolej Linton, Mantin


1.12 Kolej Universiti Teknologi Antarabangsa Twintech

1.12.1 Diploma in Quantity Surveying (09/10/2008 – yet to be confirmed by MQA)

1.13 Malaysian Government Polytechnics

1.13.1 Diploma in Quantity Surveying and Quantity Surveying related courses

1.14 Singapore Polytechnic

1.14.1 Passed the Final Examinations of the Technician Diploma (Building)

1.15 Taylor’s College

1.15.1 Diploma in Building Studies (Quantity Surveying) (from 02/7/2002 till 01/07/2007) and (from 02/07/2007 till 01/07/2012)

1.16 The Nottingham Trent University

1.16.1 Higher National Diploma (HND) in Quantity Surveying

1.17 Kolej Shahputra Kuantan


Conditional Accreditation

1.18 Politeknik Sultan Azlan Shah

1.18.1 Diploma in Quantity Surveying (Provisional Accreditation).

1.19 Kolej Tunku Abdul Rahman, Pulau Pinang

1.19.1 Diploma in Technology (QS) (from 10/09/2012 till 31/12/2014) Conditional

Accreditation.

Note : (*) Applicants without the required 3 credits at SPM level, may have the following for

consideration:-

(a) STPM/A Levels (b) UEC (c) Foundation Programme – Higher National Diploma/Polytechnic However, the subjects must be different from the credits obtained under SPM level. The

1119 English paper to be considered as equivalent to the English Language paper of the

SPM level.

(^) Student members with only these qualifications are required to sit the Foundation or First

Examinations set by ISM.


1.20. Kolej Teknologi Timur

1.20.1 Diploma in Technology (QS) Provisional Accreditation

1.21 Tunku Abdul Rahman College

1.21.1 Diploma in Technology (QS) (with the stipulated minimum entry requirements) (till 28/8/2005) and (from 01/01/2009 till 31/12/2010)

1.21.2 Diploma in Quantity Surveying (old programme) and Quantity Surveying related courses

1.21.3 Advanced Diploma in Technology (Building)

Holders shall be eligible to sit for the Direct Final Examination and may be

exempted from the following two papers:-

1) Measurement 2 2) Construction Technology 3

1.21.4 Advanced Diploma in Technology (Building) via Diploma in Quantity Surveying (till 28 September 2012)

Graduates who hold Advanced Diploma in Technology (Building) via

Diploma in Quantity Surveying (4 1/2 years course) can be further exempted

from the following subjects of the ISM Direct Final Examination (QS

Division)

Building Economics Measurement 3 Project Management Construction Law Law Part II: Contracts and Tort Measurement 2 (2 papers) Construction Technology 3 (2 papers)

They are therefore required to sit for the following three subjects in the ISM

Direct Final Examination:

Cost Value Engineering Professional Practice 2 Development Economics

They are also not required to submit the Dissertation


1.21.5 Diploma in Technology (QS) (commencing year 2004) and Advanced Diploma in Technology (Building)

i. Four core subjects i.e. Measurement of Building and Civil Works, Building Contract and Administration, Building & Construction

Economics and Professional Practices to be taught by qualified QS

professional personal who are members of allied professional bodies;

ii. To have three month compulsory industrial experience in QS consulting firm;

iii. To have an external RISM moderator or to provide all examination questions for moderation (to be looked into by the RISM Examination

Board); and

iv. The exemption granted by RISM to TAR College is for a period of three years subject to renewal by RISM.

Note: Professional Practice subject is not included in the TAR College

Diploma in Technology (QS) syllabus for course prior to 2004.

1.22 Universiti Teknologi Malaysia

1.22.1 Diploma in Quantity Surveying

1.23 Universiti Teknologi MARA

1.23.1 Diploma in Quantity Surveying

1.24 Kolej Universiti Inti (Formerly Known As Universiti Antarabangsa Inti)


2 Probationer

2.20 Passed the Intermediate Examination set by RISM; or

2.21 Passed the Final Part 1 of RICS in the Quantity Surveying Section; or

2.22 Advanced Diploma in Technology (Building) from Tuanku Abdul Rahman College; or

2.23 Relevant degree from other universities which are not listed under item 3.0 below; or

2.24 Either Item 1.1 or 1.2 above and over 28 years old with not less than 10 years working experience under a Member of the QS Division of RISM; or

2.25 Member of the Chartered Institute of Building (MCIOB).


3 Graduate

3.1 Passed the Final or Direct Final Examination set by RISM; or

3.2 Registered Graduate Quantity Surveyor under the Quantity Surveyor’s Registration Act 1967; or

3.3 Obtained the following qualifications from Australia universities –

3.3.1 University of Canberra (formerly Canberra College of Advanced Education)

3.3.1.1 Bachelor of Applied Science in Quantity Surveying (till February 2000)

3.3.1.2 Bachelor of Construction in Management & Economics (May 1991)

3.3.1.3 Bachelor of Construction Management & Economics (from May 1994 till February 2000)

3.3.2 Curtin University of Technology, Perth, Western Australia (formerly Western Australia Institute of Technology)

3.3.2.1 Bachelor of Applied Science in Quantity Surveying (till July 1999)

3.3.2.2 Bachelor of Applied Science in Construction Management and Economics (from May 1994 till July 1999)

3.3.2.3 Bachelor of Applied Science (Construction Management and Economics)(from March 2002 till 17/12/2005)

(Note: Post 2004 - All Malaysian undergraduates are required to

acquire six months practical training in Malaysia or Australia under

the approved supervision of CUT prior to the award of the Degree.)

3.3.2.4 Bachelor of Applied Science (Construction Management and Economics)** (from 17/12/2005 till 16/12/2009)

(Note: Post 2004 - All Malaysian undergraduates are required to

acquire six months practical training in Malaysia or Australia under

the approved supervision of CUT prior to the award of the Degree.)

3.3.2.5Bachelor of Applied Science (Construction Management and

Economic)* (from 17/12/2009 till 16/12/2012)

Note: All Malaysian undergraduates shall be required to acquire six

months practical training in Malaysia or Australia under the

approved supervision of CUT prior to the award of the Degree.


3.3.3 Deakin University, Geelong

3.3.3.1 Bachelor of Building with and including Graduate Certificate in Quantity Surveying (pre 1992)

3.3.3.2 Bachelor of Building (Honours) (from May 1994 till October 2001)

With the following Option Subjects:

Level 3 (3rd

Year)

i. ABG 300 Industry Studies (4) ii. ABG 391 Building Research (2) iii. ABG 362 Building Economics (1) iv. ABG 363 Contract Administration (1)

Level 4 (4th Year)

i. ABG 443 Construction Practice (2) ii. ABG 451 Building Technology 3 (1) iii. ABG 452 Building Materials & System 3 (1) iv. ABG 461 Administration & Procedures (1) v. ABG 462 Development Economics vi. ABG 471 Advanced Measurement/Professional

Practice

vii. ABG 491 Building Research Dissertation

3.3.4 University of Melbourne

3.3.4.1 Bachelor of Building (QS Option) (till February 2000)

Pre 1989

With the following QS Option Subjects:

i. 700-434 Quantity Surveying & Estimating 3 ii. 700-437 Building Project Organisation iii. 700-440 Building Economics 2

3.3.4.2 Bachelor of Building with and including Bachelor of Planning and Design (Building) (Honours) (from January 1992 till February

2000)

With the following QS Option Subjects:

Post 1989

i. 700-361 Cost Management 3A ii. 700-362 Cost Management 3B iii. 700-413 Project Administration iv. 700-414 Project Organisation v. 700-418 Land Economy vi. 700-419 Advanced Building Law

Post 1993

i. 702-361 Cost Management 3 ii. 702-413 Project Administration iii. 700-414 Project Organisation iv. 700-418 Land Economy v. 700-419 Advanced Building Law vi. 700-483 Advanced Quantity Surveying


Post 1995 till February 2000

i. 700-413 Project Administration ii. 700-414 Project Organisation iii. 700-418 Land Economy iv. 700-419 Advanced Building Law v. 700-483 Advanced Quantity Surveying

3.3.4.3 Bachelor of Property and Construction (from July 1999 till February 2000)

With the following Building Economics/Quantity Surveying

Option Subjects:

Post 1998 till February 2002

i. 705-173 Shaping the Metropolis ii. 702-361 Construction Cost Planning and Control iii. 702-661 Methods and Techniques

in Facilities Planning and Management

iv. 702-413 Project Administration v. 702-419 Advanced Construction Law vi. 702-415 Building Economy vii. 702-414 Project and Development Management viii. 700-483 Advanced Quantity Surveying

3.3.4.4 Bachelor of Planning and Design (Property and Construction) with and including Bachelor of Property and Construction (Honours)**

(from January 2003 till 27/10/2007)

With the following Option Subjects:

Post 2003

i. 702-483 Advanced Quantity Surveying ii. 702-414 Project Management iii. 702-413 Project Administration iv. 702-412 Advanced Services v. 702-415 Facility Management vi. 705-403 Research Project C

Post 2006 till 27/10/2007

i. 702-483 Advanced Quantity Surveying ii. 702-414 Project Management iii. 702-413 Project Administration iv. 702-465 Environmental Systems v. 702-415 Facility Management vi. 705-444 Research Methods vii. 705-455 Research Project A

3.3.4.5 Bachelor of Environment (Construction Major) followed by the Master of Construction Management

(from 26/10/2007 till 27/10/2010)


3.3.5 University of New South Wales (formerly New South Wales Institute of Technology)

3.3.5.1 Bachelor of Applied Science in Quantity Surveying (till June 1998)

3.3.5.2 Bachelor of Building (QS Option) (till October 2001) With the following QS Option Subjects:

Pre 1986

i. 35.801 Quantity Surveying 1 ii. 35.802 Quantity Surveying 2 iii. 35.803 Quantity Surveying 3

Post 1986

i. 35.303 Quantity Surveying 3 ii. 35.313 Building Economics 3 iii. 35.005 Construction 5 iv. 35.006 Construction 6 v. 35.274 Commercial Arbitration

Post 1993

i. BLDG4006 Construction 6 ii. BLDG4274 Commercial Arbitration iii. BLDG4303 Quantity Surveying 3 iv. BLDG4313 Building Economics 3 v. BLDG9998 Quantity Surveying Industry Program to be

taken as 6 months continuous employment

with a Quantity Surveying firm, and to be

completed before the start of the final year

of the course.

Post 1996 till October 2001

i. BLDG4006 Construction 6 ii. BLDG4275 Dispute Avoidance & Resolution iii. BLDG4303 Quantity Surveying 3 iv. BLDG4313 Building Economics 3 v. BLDG9998 Quantity Surveying Industry Program to be

taken as 6 months continuous employment

with a Quantity Surveying firm, and to be

completed before the start of the final year

of the course.

3.3.5.3 Bachelor of Building Construction Management (QS Option)** (from October 2001 till 26/5/2007)

With the following Q.S. Option Subjects:

Post 2002

i. BENV2709 Construction 6 ii. BLDG4303 Quantity Surveying 3 iii. BLDG4314 Building Economics 3 iv. BLDG4422 Estimating 2 v. BLDG9998 Quantity Surveying Industry Program to be

taken for a total period of 6 months

employment with Quantity Surveying

related organizations.


Post 2003

i. BLDG4304 Forecasting Bidding and Cost Control ii. BLDG4315 Business and Financial Control iii. BLDG4285 Professional Practice and Procedure iv. BLDG4305 Design Evaluation v. BLDG4275 Dispute Avoidance and Resolution vi. BLDG9998 Quantity Surveying

Industry Program to be taken for a total

period of 6 months employment with

Quantity Surveying related organizations.

Post July 2006

i. BLDG4304 Forecasting Bidding and Cost Control ii. BLDG4315 Business and Financial Control iii. BLDG4285 Professional Practice and Procedure iv. BLDG4305 Design Evaluation v. BLDG9998 Quantity Surveying Industry Program to be

taken for a total period of 6 months

employment with Quantity Surveying

related organizations.

Post December 2006 till 26/5/2007

a) Session 1 Core Options (A):-

i. Building Services ii. Building Measurement & Documentation iii. Estimating & Bidding for Construction Projects iv. Value Management & Development Feasibility

b) Session 2 Core Options (B):-

i. Design Management in the Construction Industry

3.3.6 Queensland University of Technology (formerly Queensland Institute of Technology)

3.3.6.1 Diploma in Quantity Surveying (till November 1995)

3.3.6.2 Bachelor of Applied Science in Quantity Surveying (from May 1991 till February 2000)

With the following Q.S. Option Subjects:-

Post May 2004

(i) CNB424 Specialist Measurement (ii) CNB408 Advance Building and Civil Construction (iii) CNB227 Applied Computing

3.3.6.3 Bachelor of Applied Science in Quantity Surveying (with Honours*) (last batch graduating in December 2008)


Post May 2004

(iv) CNB424 Specialist Measurement (v) CNB408 Advance Building and Civil Construction (vi) CNB227 Applied Computing


3.3.6.4 Bachelor of Urban Development (Quantity Surveying) [formerly known as Bachelor of Applied Science in (Quantity Surveying)

with Honours] (from April 2001 till 2/1/2007)

3.3.6.5 Bachelor of Urban Development (Quantity Surveying) (With /without Honours) [formerly known as Bachelor of Applied Science

in (Quantity Surveying) with Honours]

-Post 2005 (from 3/1/2007 till 2/1/2010)

(First batch entering in February 2006)

3.3.6.6 Bachelor of Urban Development (in Quantity Surveying)(with/without Honours*)

-Post 2008 (For 2009 intake onwards) (3/1/2007 till 2/1/2010)

With the following second Major Option in either:-

(i) Property Economics Development; or

(ii) Property Economics Valuation

(iii) Property Economics Investment

3.3.6.7 Bachelor of Urban Development (in Quantity Surveying) (with/without Honours*) Post 2008 (For 2009 intake onwards) -

(from 28/5/2010 till 27/5/2012)

Note: With the following second Major Option in either:-

Property Economics Development; or Property Economics Valuation; or Property Economics Investment

3.3.7 RMIT University (formerly Royal Melbourne Institute of Technology)

3.3.7.1 Associate Diploma in Quantity Surveying (till June 1998)

3.3.7.2 Bachelor of Applied Science in Construction Economics (till June 1998)

3.3.7.3 Bachelor of Construction Management (Economics) (from June 1998 till October 2001)

3.3.7.4 Bachelor of Applied Science in Construction Management (from 26/10/2004 till 25/10/2007)

3.3.7.5 Bachelor of Applied Science in Construction Management (from 26/10/2007 till 27/10/2010)


3.3.8 University of South Australia (formerly South Australia Institute of Technology)

3.3.8.1 Bachelor of Applied Science in Building Technology (till June 1998)


(i) Building Construction 3 (ii) Building Economics 3

3.3.8.2 Bachelor of Applied Science in Building Studies (QS Option) (till June 1998)


(i) Building Construction 3 (ii) Building Economics 2 (iii) Professional Practice and Law (iv) Building Project Management (v) Quantity Surveying 3

3.3.8.3 Bachelor of Applied Science in Building Studies (QS Option) (from May 1994 till October 2001)

May 1994 till November 1995

Semester 1

(i) 00174 Quantity Surveying 5

Semester 2

(i) 01245 Quantity Surveying 6

August 1998 till October 2001

00174 Quantity Surveying 5


3.3.8.4 Bachelor of Building (QS Option) (January 1992)

With the following Q.S. Option Subjects (4th

year):-

Semester 1

(i) 00174 Quantity Surveying 5 or (ii) 00179 Building Management 6 or (iii) 02601 Building Structures 5 or (iv) 00178 Building Science & Services

Semester 2

(i) 01245 Quantity Surveying 6 or (ii) 01250 Building Management 7 or (iii) 01249 Building Science & Services 6 or (iv) 02602 Building Structures 6


3.3.8.5 Bachelor of Building (QS Option) (from June 1997 till October 1998)


Year):-

Pre 1995



Post 1995

Quantity Surveying 3

Quantity Surveying 4

3.3.8.6 Bachelor of Construction Management and Economics (with Honours)** [formerly known as Bachelor of Building

(Honours)(QS Option)](from August 1998 till 26/5/2007)

extended (from 27/5/07 – 28/5/08)


Year):-

Pre 1997

(i) 09143 Quantity Surveying 3 (ii) 09144 Quantity Surveying 4

Post 1997 till October 2001

(i) 10290 Quantity Surveying 2N (ii) 10291 Quantity Surveying 3N

(Note: Post May 2004 In the context of advanced entry, the summer

semester (semester 5) or semester 6 (Professional Practice Project)

cannot be considered as part of the program that a student with

advanced standing has undertaken to complete the degree program.)

3.3.8.7 Bachelor of Construction Management and Economics (with/without Honours)* for Quantity Surveying option

(from 29/5/2008 till 28/5/2011)

With the following Q.S. Option Subjects

(i) BUIL 4021 Quantity Surveying 3R

(ii) BUIL 4022 Quantity Surveying 4R

3.3.8.8 Bachelor of Construction Management and Economics (with/without Honours)* for the Quantity Surveying option

Date Accredited: (from 29/05/2011 till 28/05/2013)

Note : All Malaysian students shall be required to take the

Quantity Surveying Specialization/ option, i.e with subjects

Quantity Surveying 3R and Quantity Surveying 4R taken in the

4th

years of the course.


3.3.9 University of Technology, Sydney

3.3.9.1 Bachelor of Applied Science in Quantity Surveying (from May 1991 till October 2001)

3.3.9.2 Bachelor of Building in Construction Economics (from October 1997 till October 2001)

3.3.9.3 Bachelor of Construction** (from 16/12/2004 till 15/12/2006)

Note:

(1) All Malaysian students admitted through advance standing

for the Bachelor of Construction course, must complete the

following subjects (made compulsory) as part of the course:

(a) Building Economics 1 (Subject Number 16207) offered in Spring Semester of Year 2 of full time

course in lieu of Structural Behaviour (Subject

Number 16315) offered in Autumn Semester of

Year 3 of full time course.

(b) Complete the QS measurement workshop, if this is being offered as part of industrial training, to assist

overseas students accumulates industrial training

points.

(2) All Malaysian students are required to undertake the

following subjects (made compulsory) as part of the

course:-

(a) Dissertation in the form of two subjects; Project A

(Subject Number 16135) and Project S (Subject

Number 16200), as two of the four electives

required to complete the course.

(b) Any additional two electives from any of the three

sub-majors (Project Management, Technology and

General Practice).

3.4 Obtained the following qualifications from Malaysia universities –

3.4.1 Universiti Islam Antarabangsa Malaysia

3.4.1.1 Bachelor (Honours) in Quantity Surveying [Sarjana Muda

(Kepujian) Ukur Bahan] (from May 2004 till 26/5/2007)


(Kepujian) Ukur Bahan] (from 25/5/2007 till 24/5/2009)


(Kepujian) Ukur Bahan] (from 25/05/2009 till 24/05/2012)

Note: The Board is in the midst of assessing UIAM's application

for re-accreditation.


3.4.2 Universiti Malaya

3.4.2.1 Bachelor (Honours) in Quantity Surveying [Sarjana Muda (Kepujian) Ukur Bahan] (from July 1999 till 29/12/2006)

3.4.2.2 Bachelor (Honours) in Quantity Surveying [Sarjana Muda (Kepujian) Ukur Bahan] (from 30/12/2006 till 31/12/2009)


(Kepujian) Ukur Bahan] (from 01/01/2010 - 31/12/2013)

3.4.3 Universiti Sains Malaysia

3.4.3.1 Bachelor of Science (Housing, Building and Planning) Honours

(Quantity Surveying) [Sarjana Muda Sains (Perumahan, Bangunan

dan Perancangan) Kepujian (Ukur Bahan)] (from September 2002

till 28/8/2008)

(Note: Graduates without dissertation will be required to have a

minimum of one year satisfactory working experience in a

registered Consulting QS Practice approved by the Board, in order

to be exempted from topping-up scheme); or


(Quantity Surveying) [Sarjana Muda Sains (Perumahan, Bangunan

dan Perancangan) Kepujian (Ukur Bahan)] (from 27/8/2008 till

28/8/2011)

(Note: Graduates without dissertation will be required to have a

minimum of one year satisfactory working experience in a

registered Consulting QS Practice approved by the Board, in order

to be exempted from topping-up scheme); or


(Quantity Surveying) (from 29/08/2011-28/08/2014)

3.4.4 Universiti Sains Islam Malaysia

3.4.4.1 Sarjana Muda Ukur Bahan dengan Kepujian (Provisional

Accreditation) (from 10/10/2011 till 09/10/2014)

3.4.5 SEGI University

3.4.5.1 Sarjana Muda (Kepujian) Ukur Bahan (Akreditasi Sementara)

(from 06/09/2012 till 05/09/2015)


3.4.6 Universiti Teknologi Malaysia

3.4.6.1 Bachelor (Honours) Quantity Surveying [Sarjana Muda (Kepujian) Ukur Bahan] (till 8/10/2007)

(Note: Graduates with the integrated 4 years degree program will be

required to have a minimum of one year satisfactory working

experience in a registered Consulting QS Practice approved by the

Board, in order to be exempted from topping-up scheme)

3.4.6.2 Bachelor (Honours) Quantity Surveying [Sarjana Muda (Kepujian) Ukur Bahan] (from 7/10/2007 till 6/10/2009)

(Note: Graduates with the integrated 4 years degree program will be

required to have a minimum of one year satisfactory working

experience in a registered Consulting QS Practice approved by the

Board, in order to be exempted from topping-up scheme)


3.4.7 Universiti Teknologi MARA (formerly Institut Teknologi MARA)

3.4.7.1 Diploma Lanjutan Ukur Bahan / Advanced Diploma in Quantity Surveying (till June 1998)

3.4.7.2 Bachelor (Honours) Quantity Surveying [Sarjana Muda (Kepujian) Ukur Bahan] (from October 1997 till 26/5/2007)



(Note : Accreditation approval applies for full time and part time

mode of studies)

3.4.8 Universiti Tunku Abdul Rahman

3.4.8.1 Bachelor of Science (Honours) in Quantity Surveying [Sarjana Muda (Kepujian) Ukur Bahan] (from 20/1/2009 till 19/1/2011)

3.4.8.2 Bachelor of Science (Hons) Quantity Surveying (from 20/01/2012 till 21/01/2015)

3.4.9 Taylor’s University College

3.4.9.1 Bachelor of Quantity Surveying (Honours)[Provisional Accreditation) (from 20/1/2009 till 19/1/2011)

(Note: The evaluation panels are in the midst of assessing the

application for re-accreditation by the university)

3.4.10 Kolej Universiti Antarabangsa INTI

3.4.10.1 Bachelor of Science (Honours) Quantity Surveying [Provisional Accreditation] (from 29/11/2010 till 28/11/2013)


3.4.11 Kuala Lumpur Infrastructure University College

3.4.11.1 Bachelor of Quantity Surveying (Hons) [Provisional

Accreditation] Date Accredited: (from 18/06/2012 till 17/06/2015)

3.4.12 Kolej Universiti Teknologi Antarabangsa Twintech

3.4.12.1 Bachelor of Quantity Surveying (Hons) Accredited: 19/09/2011 -

18/09/2014

Note: This recognition also caters the 2005/2006 and 2007/2008

intake of students

3.4.13 Kolej Tun Abdul Rahman (KTAR)

3.4.13.1 Diploma Lanjutan Ukur Bahan (from 12/05/2011 - 11/05/2014)

Note: Students in this program are required to have one (1) year

working experience in the field of quantity surveying under the

supervision of Quantity Surveyors before allowing them to register

with the Board as a Registered Graduate Quantity Surveyor.

3.4.14 Royal Institution of Surveyors, Malaysia

Course:

Member

Pass Final/Direct Examination

Date Accredited: Not Available

3.4.15 Australian Institute of Quantity Surveyors

3.4.14.1 Associate Member (Date Accredited: NIL)

Note: Only applicable to Associate Member with a basic degree

qualification which is recognized by the Board of Quantity Surveyors.

3.5 Obtained the following qualifications from New Zealand universities –

3.5.1 Unitec Institute of Technology (formerly Carrington Polytechnic)

3.5.1.1 Bachelor of Quantity Surveying / Bachelor of Quantity Surveying

with Honours (from October 1997 till October 2001)

3.5.1.2Bachelor of Construction with Honours (from 21/6/2010 till

20/6/2013)

3.5.2 UNITEC New Zealand

3.5.2.1 Bachelor of Construction (from 21/06/2010 till 20/06/2013)


3.6 Obtained the following qualifications from Republic of Ireland colleges and polytechnics –

3.6.1 Dublin Institute / College of Technology, Ireland

3.6.1.1 Diploma in Construction Economics (till October 2001)

3.6.2 Limerick College of Art Commerce & Technology, Republic of Ireland

3.6.2.1 Diploma in Quantity Surveying (till October 2001)

3.7 Obtained the following qualifications from Singapore universities –

3.7.1 National University of Singapore (formerly University of Singapore)

3.7.1.1 BSc Degree in Building (till May 1994)

3.7.1.2 BSc (Hon) Degree in Building (from November 1995 till October 2001)

3.8 Obtained the following qualifications from United Kingdom universities –

3.8.1 Abertay Dundee University, Scotland

3.8.1.1 BSc (Hons) Degree in Quantity Surveying (with the Construction Law subject taken as compulsory elective) (from October 1997 till

October 2001)#

3.8.2 Anglia Polytechnic University, England

3.8.2.1 BSc Degree in Quantity Surveying (November 1995)

3.8.2.2 BSc (Hons) Degree in Quantity Surveying (from October 1997 till October 2001)

3.8.3 University of Aston, Birmingham, England

3.8.3.1 BSc Degree in Building Economics and Measurement (till 1992)

3.8.4 University of Central England, Birmingham, England (formerly City of Birmingham Polytechnic)

3.8.4.1 Diploma in Quantity Surveying (till January 1992)

3.8.4.2 BSc (CNAA) Degree in Quantity Surveying (till January 1992)

3.8.4.3 BSc Degree in Quantity Surveying (May 1994)

3.8.4.4 BSc (Hons) Degree in Quantity Surveying (from November 1995 till October 2001)


3.8.5 University of Central Lancashire, England (formerly Lancashire Polytechnic)



3.8.5.3 BSc (Hons) Degree in Quantity Surveying (from November 1995 till October 2001)#

3.8.6 University of Glamorgan, Wales (formerly Wales Polytechnic / Glamorgan Polytechnic)

3.8.6.1 Polytechnic Associateship in Construction Economics (till January 1992)




3.8.7 Glasgow Caledonian University, Scotland (formerly Glasgow Polytechnic / Glasgow College of Building and Printing)




3.8.7.4 BSc (Hons) Degree in Quantity Surveying (from November 1995 till 30/7/2007)

3.8.7.5 BSc (Hons) Quantity Surveying (from 29/7/2007 till 29/7/2010)

3.8.8 University of Greenwich, England (formerly Thames Polytechnic / Hammersmith School of Art & Building)






3.8.9 Heriot-Watt University, Edinburgh, Scotland

3.8.9.1 BSc Degree in Building (QS Option) (till November 1995)

3.8.9.2 BSc (Hons) Degree in Building (QS Option) (from October 1997 till October 2001)

3.8.9.3 BSc Degree in Building Economics & Quantity Surveying (from 1973 till January 1992)

3.8.9.4 BSc (Hons) Degree in Building Economics & Quantity Surveying (from 1987 till 2003)

3.8.9.5 BSc (Hons) Degree in Quantity Surveying (formerly known as BSc (Hons) Degree in Building Economics and Quantity Surveying)

[With compulsory elective subjects in Construction Technology 7

(D1.4AC1) during Term 1 of Year 4 and Construction Technology

8 (D1.4AD2) during Term 2 of Year 4] (from 11/1/2003 till

12/1/2005)


3.8.9.7 BSc (Hons) in Quantity Surveying (from 30/8/2010 till 29/8/2012)

Note: All Malaysian students on the BSc (Honours) Quantity

Surveying course, complete the following modules (made

compulsory) as part of the course:-

Construction Technology 5 (D14AW) during Term 1 of Year 4

Construction Technology 6 (D14AX) during Term 2 of Year 4

3.8.10 Kingston University, England (formerly Kingston Polytechnic)





3.8.11 Leeds Metropolitan University, England (formerly Leeds Polytechnic)

3.8.11.1 Diploma in Building Economics (till January 1992)





3.8.12 Liverpool John Moores University, England (formerly Liverpool Polytechnic)






3.8.13 Loughborough University of Technology, England

3.8.13.1 BSc (Hons) Degree in Commercial Management and Quantity Surveying (from November 1995 till May 2004)

3.8.14 University of Manchester Institute of Technology (UMIST), England

3.8.14.1 BSc (Hons) Degree in Commercial Management and Quantity Surveying (from November 1995 till October 2001)

3.8.15 Napier University, Scotland (formerly Napier Polytechnic)



3.8.15.3 Diploma in Quantity Surveying (November 1995)


3.8.16 University of Northumberia at Newcastle, England (formerly Newcastle-Upon-Tyne Polytechnic)




3.8.16.4 BSc (Hons) Degree in Quantity Surveying (from November 1995 till 25/7/2008)



3.8.17 The Nottingham Trent University, England (formerly Nottingham Polytechnic / Trent Polytechnic)

3.8.17.1 Diploma in Quantity Surveying (from May 1991 till January 1992)

3.8.17.2 BSc (CNAA) Degree in Quantity Surveying (from May 1991 till January 1992)



3.8.17.5 BSc (Hons) Degree in Quantity Surveying and Construction Cost Management (from June 2002 till December 2004)

3.8.17.6 BSc (Hons) in Quantity Surveying and Construction Commercial Management (28/10/2008 till 29/10/2011)

3.8.18 University of Portsmouth, England (formerly Portsmouth Polytechnic)




3.8.18.4 BSc (Hons) Degree in Quantity Surveying (from November 1995 till August 2003)

3.8.18.5 BSc (Hons) Degree in Construction Management (Quantity Surveying) (from August 1998 till February 2000)

3.8.18.6 BSc (Hons) Property Development with Quantity Surveying (from 3/5/2010 till 2/5/2013)

3.8.19 University of Reading, England

3.8.19.1 BSc Degree in Quantity Surveying (till May 1994)

3.8.19.2 BSc (Hons) Degree in Quantity Surveying (from November 1995 till December 2004)



3.8.20 The Robert Gordon University, Scotland (formerly Robert Gordon’s Institute / College of Technology, Aberdeen)



3.8.20.3 BSc Degree in Quantity Surveying (May 1994 till November 1995)

3.8.20.4 BSc (Hons) Degree in Quantity Surveying (from October 1997 till May 2006)

Post June 1998 till February 2000

With elective subjects in:-

(a) Civil Engineering (b) Mechanical & Electrical Engineering

April 2001

With elective subjects in Construction Engineering

Post September 2002 till October 2001

With compulsory elective subjects in:-

(a) Bills of Quantities for Building Works (b) Integrative Studies 2 – Quantity Surveying

3.8.20.5 BSc (Hons) Degree in Surveying (from July 2006 till 26/5/07)

Post 2003

Compulsory elective subjects for Malaysian students (who have

entered the University in 2003, 2004 and 2005):-

(a) SU 2005 - Measurement and Mensuration

(b) SU 2026 - Integrative Studies 2 – Quantity Surveying

3.8.20.6 BSc (Hons) Surveying (from 25/5/2007 till 26/5/2010)

Compulsory elective subjects for Malaysian students (who have

entered the University in 2003, 2004 and 2005):-

(a) SU 2005 - Measurement and Mensuration

(b) SU 2026 - Integrative Studies 2 – Surveying


Note: With compulsory elective subjects in:

Bill of Quantities for Building Works Integrative Studies 2-Quantity Surveying


3.8.21 University of Salford, England

3.8.21.1 BSc Degree in Construction Economics (full time courses from 1976 till 1983)

3.8.21.2 BSc (Hons) Degree in QS & Construction Economics (full time courses from 1983 till 1991)

3.8.21.3 BSc Degree in Quantity Surveying (part time courses from 1988 till 1990)

3.8.21.4 BSc (Hons) Degree in Surveying (Quantity Surveying) (part time courses from 1991 till 2000)

3.8.21.5 BSc (Hons) Degree in Quantity Surveying (part time courses from 1991 and full time courses from 1992 till 28/8/2007)



3.8.22 Sheffield Hallam University, England (formerly Sheffield City Polytechnic)

3.8.22.1 BSc (Hons) Degree in Quantity Surveying (from October 1997 till October 2001)


3.8.22.3BSc (Hons) Quantity Surveying (from 25/1/2009 till 24/2/2012).

3.8.23 South Bank University, England (formerly South Bank Polytechnic/ Brixton School of Building)

3.8.23.1 BSc (CNAA) Degree in Building Economics (till January 1992)




3.8.24 Staffordshire University, England (formerly Staffordshire Polytechnic / Stoke-on-Trent Cauldon College of Further Education)


3.8.24.2 BSc Degree in Quantity Surveying (from January 1992 till May 1994)



3.8.25 University of Ulster at Jordanstown, Northern Ireland

3.8.25.1 BSc Degree in Quantity Surveying (till May 1994)


3.8.26 University of West England, Bristol, England (formerly Bristol Polytechnic)





3.8.26.5 BSc (Hons) Degree in Quantity Surveying and Commercial Management (from 16/12/2004 till 15/12/2006)

3.8.26.6 BSc (Hons) in Quantity Surveying and Commercial Management (from 16/12/2006 till 15/12/2009)

3.8.26.7 BSc (Hons) in Quantity Surveying and Commercial Management (from 16/12/2009 till 15/12/2012)

3.8.27 University of Westminster, England (formerly Polytechnic of Central London)





3.8.28 University of Wolverhampton, England

3.8.28.1 BSc (Hons) Degree in Quantity Surveying (from November 1995 till December 2004)

Post 2002

With compulsory elective subjects in Construction Economics

3.8.28.2 BSc (Hons) Commercial Management and Quantity Surveying (September 2005 intake only – from 30/9/2005 till 31/8/2006)


3.9 Obtained the following qualifications from United Kingdom colleges and polytechnics –

3.9.1 College of Estate Management, England

3.9.1.1 Diploma in Surveying (QS Option) (from May 1991 till August 2003)

3.9.1.2 BSc Degree in Quantity Surveying (External) (from September 2002 till 8/10/2007)

3.9.1.3 BSc (Hons) (External) Degree in Quantity Surveying (from 28/10/2008 till 29/10/2011)

3.9.2 Dundee Institute of Technology, Scotland (formerly known as Dundee College of Technology)

3.9.2.1 Diploma in Quantity Surveying (till February 2000)

3.9.2.2 BSc (CNAA) Degree in Quantity Surveying (till February 2000)

3.9.2.3 BSc / BSc (Hons) Degree in Quantity Surveying (from November 1995 till February 2000)

3.9.3 Northern Ireland Ulster Polytechnic

3.9.3.1 Diploma in Quantity Surveying (till February 2000)

3.9.3.2 BSc (CNAA) Degree in Quantity Surveying (till February 2000)

3.9.4 Regional Technical College, Limerick, Northern Ireland

3.9.4.1 Professional Diploma in Construction Economics (from November 1995 till October 2001)

3.10 Members of the following Professional Institutions –

3.10.1 An Associate Member of the New Zealand Institute of Quantity Surveyors; or

3.10.2 An Associate Member of the Institute of Quantity Surveyors, Australia with ISM recognized qualifications; or

3.10.3 A Member of Institute of Quantity Surveyors, UK (prior January 1992); or

3.10.4 Diploma from Institute of Quantity Surveyors, UK (from May 1991 till November 1995); or

3.10.5 Diploma from the Royal Institution of Surveyors, UK (from January 1992 till September 2002); or

3.10.6 Pass Final/Direct Final Examination of the Royal Institution of Chartered Surveyors (from January 1992 till September 2002); or


3.10.7 Pass in the Final Examination of the Graduate Entry Scheme (GES) of the Royal Institution of Chartered Surveyors (from October 1997 till September

2002).

4.0 Member

4.1 Passed the Joint Test of Professional Competence in Quantity Surveying jointly conducted by the Board of Quantity Surveyors, Malaysia and the QS Division of RISM;

or

4.2 Satisfied the requirements set out under the special entry scheme (as approved by the Council during Session 1998/1999) as attached in Appendix A; or

4.3 A Member or Fellow of the Royal Institution of Chartered Surveyors, U.K. with RISM recognized qualifications. Potential applicants must meet the following requirements:

4.3.1 More than 10 years of relevant working experience after election as Corporate Members of RICS;

4.3.2 Has qualification which is recognized by RISM; and 4.3.3 Attend a special interview with the Council or QS Division Committee

Members (Note : As approved by the Council during Session 2006/2007)


Appendix A

SPECIAL ENTRY SCHEME

1.0 Background

Special Entry Scheme for Quantity Surveying Division was approved by the Council during

the 1997/1998 Session. The purpose of the scheme is to give opportunity to Quantity

Surveying graduates holding senior posts in an organisation or firm to apply for full

membership with RISM. Applicants must fulfill the following requirements:

- 10 years of working experience with recognised qualification or; - 5 years of working experience with recognised qualifications and post graduates

qualification

Each applicant is also required to attend a special interview.

During the 1998/99 Session, the Council has endorsed the Quantity Surveying Division's

proposal to include 'contribution to the institution and profession' as an additional criterion

for the Special Entry Scheme. Each applicant must contribute to RISM or the profession in

the form of CCPD talk, articles or serve as a Sub Committee member at RISM.

2.0 Requirements for Special Entry Scheme

Requirements for the Special Entry Scheme are as follows:

1. i) All applicants must have 10 years of working experience with recognised qualifications;

or

ii) 5 years of working experience with recognised qualification and postgraduate qualifications of which with two (2) years of the working experience shall be done

locally.

2. Contribution towards RISM or the profession in a form of one CPD talk and at least two (2) approved articles on working experience for The Malaysian Surveyor.

3. Each application must be accompanied by the applicant's curriculum vitae outlining his qualification, working experience and current position in his organisation.

4. The applicant shall be required to attend a professional interview conducted by the Royal Institution of Surveyors Malaysia and shall satisfy the interview panel with

regards to his/her eligibility.

5. All applicants shall be subject to approval of the Council of RISM. RISM shall not be obliged to assign any reason for the rejection of any application.

NOTE: THE REQUIREMENT APPLIES TO BOTH LOCAL AND FOREIGN APPLICANTS.


IN SUMMARY

Item Qualifications

Eligible

Class of

Membership

1 Malaysian Certificate of Education (MCE) / Sijil Pelajaran Malaysia (SPM) (O

Level) or equivalent – minimum 3 credits which include Mathematics and

Bahasa Malaysia or English *^

Student

2 Higher School Certificate (HSC) / Sijil Tinggi Pelajaran Malaysia (STPM) /

Associated Examination Board (AEB) (A Level) – principal level passes from

any 2 of the following subjects; Mathematics, Economics, Physics, Chemistry,

Geography or Bahasa Malaysia ^

Student

3 Passed the Foundation or First Examinations set by RISM Student

4 Passed the Intermediate Examinations of the Royal Institution of Chartered

Surveyors, UK (RICS) in Quantity Surveying Section

Student

5 Diploma in Quantity Surveying from Institut Eksekutif, Kuching, Malaysia

(from August 2006 till August 2009), (15th May 2006 till 14

th May 2011)

Student

6 Diploma in Quantity Surveying and Quantity Surveying related courses from

Malaysian Government Polytechnics

Student

7 Higher National Diploma (HND) in Quantity Surveying from The Nottingham

Trent University

Student

8 Passed the Final Examinations of the Technician Diploma (Building) from

Singapore Polytechnic

Student

9 Diploma in Building Studies (Quantity Surveying) from Taylor’s College,

Malaysia (from 26/7/2003 till 27/7/2005)

Student

10 Diploma in Technology (QS) (with the stipulated minimum entry

requirements) from Tunku Abdul Rahman College, Malaysia (till 28/8/2005)

Student

11 Diploma in Quantity Surveying (old programme) and Quantity Surveying

related courses from Tunku Abdul Rahman College, Malaysia

Student

12 Diploma in Quantity Surveying from United College (Sarawak), Malaysia

(from 31/7/2004 till 30/7/2007), (from 14/0/2006 till 13/08/2009)

Student

13 Diploma in Quantity Surveying from Universiti Teknologi Malaysia Student

14 Diploma in Quantity Surveying from Universiti Teknologi MARA, Malaysia Student

15 Diploma in Quantity Surveying from Institut Teknologi Pertama, Mantin,

Malaysia (from 8/3/2006 till 07/03/2011)

Student

16 Diploma in Quantity Surveying from Inti College, Sarawak, Malaysia (from

13/2/2006 till 12/2/2011)

Student


Item Qualifications

Eligible

Class of

Membership

17 Diploma in Quantity Surveying from Taylor’s College, Malaysia (from

02/07/2007 till 1/7/2012)

Student

18 Diploma in Quantity Surveying from Kolej Universiti Antarabangsa Inti, Nilai

(from 13/02/2007 till 12/02/2012)

Student

19 Diploma in Quantity Surveying from Kolej Tunku Abdul Rahman (till

28/8/2005), (from 01/01/2009 till 31/12/2010)

Student

20 Diploma in Quantity Surveying from Kolej Linton Mantin (from 18/03/2009

till 31/12/2010)

Student

21 Diploma in Quantity Surveying from Kolej Bersatu Sarawak (from 13/08/2006

till 12/08/2009), (from 13/08/2009 till 12/08/2014)

Student

22 Passed the Intermediate Examination set by ISM Probationer

23 Passed the Final Part 1 of RICS in the Quantity Surveying Section Probationer

24 Advanced Diploma in Technology (Building) from Tunku Abdul Rahman

College

Probationer

25 Relevant degree from other universities which are not listed under item 3.0

above

Probationer

26 Either item 1.1 or 1.2 above and over 28 years old with not less than 10 years

working experience under a Member of the QS Division of ISM

Probationer

27 Member of the Chartered Institute of Building (MCIOB) Probationer

28 Passed the Final or Direct Final Examination set by ISM Graduate

29 Registered Graduate Quantity Surveyor under the Quantity Surveyor’s

Registration Act 1967, Malaysia

Graduate

30 Bachelor of Applied Science in Quantity Surveying from University of

Canberra (formerly Canberra College of Advanced Education), Australia (till

February 2000)

Graduate

31 Bachelor of Construction in Management & Economics from University of

Canberra (formerly Canberra College of Advanced Education), Australia (May

1991)

Graduate

32 Bachelor of Construction Management & Economics from University of

Canberra (formerly Canberra College of Advanced Education), Australia (from

May 1994 till February 2000)

Graduate


Item Qualifications

Eligible

Class of

Membership

33 Bachelor of Applied Science in Quantity Surveying from Curtin University of

Technology, Perth, Western Australia (formerly Western Australia Institute of

Technology), Australia (till July 1999)

Graduate

34 Bachelor of Applied Science in Construction Management and Economics

from Curtin University of Technology, Perth, Western Australia (formerly

Western Australia Institute of Technology), Australia (from May 1994 till July

1999)

Graduate

35 Bachelor of Applied Science (Construction Management and Economics)


Western Australia Institute of Technology), Australia ** (from March 2002 till

17/12/2005) (refer to note in section 3.3.2.3 above)

Graduate

36 Bachelor of Applied Science (Construction Management and Economics)


Western Australia Institute of Technology), Australia ** (from 17/12/2005 till

16/12/2009) (refer to note in section 3.3.2.4 above)

Graduate

37 Bachelor of Building with and including Graduate Certificate in Quantity

Surveying from Deakin University, Geelong, Australia (pre 1992)

Graduate

38 Bachelor of Building (Honours) from Deakin University, Geelong, Australia

(from May 1994 till October 2001) (refer to note in section 3.3.3.2 above)

Graduate

39 Bachelor of Building (QS Option) from University of Melbourne, Australia

(till February 2000) (refer to note in section 3.3.4.1 above)

Graduate

40 Bachelor of Building with and including Bachelor of Planning and Design

(Building) (Honours) from University of Melbourne, Australia (from January

1992 till February 2000) (refer to note in section 3.3.4.2 above)

Graduate

41 Bachelor of Property and Construction from University of Melbourne,

Australia (from July 1999 till February 2000) (refer to note in section 3.3.4.3

above)

Graduate

42 Bachelor of Planning and Design (Property and Construction) with and

including Bachelor of Property and Construction (Honours) from University of

Melbourne, Australia ** (from January 2003 till 27/10/2007) (refer to note in

section 3.3.4.4 above)

Graduate

43 Bachelor of Applied Science in Quantity Surveying from University of New

South Wales (formerly New South Wales Institute of Technology), Australia

(till June 1998)

Graduate

44 Bachelor of Building (QS Option) from University of New South Wales

(formerly New South Wales Institute of Technology), Australia (till October

2001) (refer to note in section 3.3.5.2 above)

Graduate


Item Qualifications

Eligible

Class of

Membership

45 Bachelor of Building Construction Management (QS Option) from University

of New South Wales (formerly New South Wales Institute of Technology),

Australia ** (from October 2001 till 26/5/2007) (refer to note in section 3.3.5.3

above)

Graduate

46 Diploma in Quantity Surveying from Queensland University of Technology

(formerly Queensland Institute of Technology), Australia (till November 1995)

Graduate

47 Bachelor of Applied Science in Quantity Surveying from Queensland

University of Technology (formerly Queensland Institute of Technology),

Australia (from May 1991 till February 2000)

Graduate

48 Bachelor of Urban Development (Quantity Surveying) [formerly known as

Bachelor of Applied Science in (Quantity Surveying) with Honours] from

Queensland University of Technology (formerly Queensland Institute of

Technology), Australia ** (from April 2001 till 2/1/2007) (refer to note in


Graduate

49 Bachelor of Urban Development (Quantity Surveying) (with Honours*) (last

batch graduating in December 2008) from Queensland University of

Technology (formerly Queensland Institute of Technology), Australia (refer to

note in section 3.3.6.4 above)

Graduate

50 Bachelor of Urban Development (in Quantity Surveying) (with/without

Honours) – Post 2005 (3/1/2007 till 2/1/2010) from Queensland University of

Technology (formerly Queensland Institute of Technology), Australia (refer to

note in section 3.3.6.5 above)

Graduate

51 Bachelor of Urban Development (Quantity Surveying) (with/without

Honours) – Post 2008 ( for 2009 intake onwards) (3/1/2007 till 2/1/2010) from

Queensland University of Technology (formerly Queensland Institute of

Technology), Australia (refer to note in section 3.3.6.6 above)

Graduate

52 Associate Diploma in Quantity Surveying from RMIT University (formerly

Royal Melbourne Institute of Technology), Australia (till June 1998)

Graduate

53 Bachelor of Applied Science in Construction Economics from RMIT

University (formerly Royal Melbourne Institute of Technology), Australia (till

June 1998)

Graduate

54 Bachelor of Construction Management (Economics) from RMIT University

(formerly Royal Melbourne Institute of Technology), Australia (from June

1998 till October 2001)

Graduate

55 Bachelor of Applied Science in Construction Management from RMIT

University (formerly Royal Melbourne Institute of Technology), Australia **

(from 26/10/2002 till 25/10/2007)

Graduate


Item Qualifications

Eligible

Class of

Membership

56 Bachelor of Applied Science in Building Technology from University of South

Australia (formerly South Australia Institute of Technology), Australia (till

June 1998) (refer to note in section 3.3.8.1 above)

Graduate

57 Bachelor of Applied Science in Building Studies (QS Option) from University

of South Australia (formerly South Australia Institute of Technology),

Australia (till June 1998) (refer to note in section 3.3.8.2 above)

Graduate

58 Bachelor of Applied Science in Building Studies (QS Option) from University

of South Australia (formerly South Australia Institute of Technology),

Australia (from May 1994 till October 2001) (refer to note in section 3.3.8.3

above)

Graduate

59 Bachelor of Building (QS Option) from University of South Australia

(formerly South Australia Institute of Technology), Australia (January 1992)

(refer to note in section 3.3.8.4 above)

Graduate

60 Bachelor of Building (QS Option) from University of South Australia

(formerly South Australia Institute of Technology), Australia (from June 1997

till October 1998) (refer to note in section 3.3.8.5 above)

Graduate

61 Bachelor of Construction Management and Economics (with Honours)**

[formerly known as Bachelor of Building (Honours)(QS Option)] from

University of South Australia (formerly South Australia Institute of

Technology), Australia (from August 1998 till 26/5/2007) (refer to note in


Graduate

62 Bachelor of Construction Management and Economics (with/without

Honours)**for Quantity Surveying option from University of South Australia

(formerly South Australia Institute of Technology), Australia (from 29/5/2008

till 28/5/2011) (refer to note in section 3.3.8.7 above)

Graduate

63 Bachelor of Applied Science in Quantity Surveying from University of

Technology, Sydney, Australia (from May 1991 till October 2001)

Graduate

64 Bachelor of Building in Construction Economics from University of

Technology, Sydney, Australia (from October 1997 till October 2001)

Graduate

65 Bachelor of Construction from University of Technology, Sydney, Australia

** (from 16/12/2004 till 15/12/2006) (refer to note in section 3.3.9.3 above)

Graduate

66 Bachelor (Honours) in Quantity Surveying [Sarjana Muda (Kepujian) Ukur

Bahan] from Universiti Islam Antarabangsa Malaysia (from May 2004 till

26/5/2007)

Graduate


Bahan] from Universiti Islam Antarabangsa Malaysia (from 25/5/2007 till

24/5/2009)

Graduate


Item Qualifications

Eligible

Class of

Membership


Bahan] from Universiti Malaya, Malaysia (from July 1999 till 29/12/2006)

Graduate


Bahan] from Universiti Malaya, Malaysia (from 30/12/2006 till 31/12/2009)

Graduate

70 Bachelor of Science (Housing, Building and Planning) Honours (Quantity

Surveying) [Sarjana Muda Sains (Perumahan, Bangunan dan Perancangan)

Kepujian (Ukur Bahan)] from Universiti Sains Malaysia (from September 2002

till 28/8/2008)

Graduate

71 Bachelor (Honours) Quantity Surveying [Sarjana Muda (Kepujian) Ukur

Bahan] from Universiti Teknologi Malaysia ( till 8/10/2007)

Graduate


Bahan] from Universiti Teknologi Malaysia (from 7/10/2007 till 6/10/2009)

Graduate

73 Diploma Lanjutan Ukur Bahan / Advanced Diploma in Quantity Surveying

from Universiti Teknologi MARA (formerly Institut Teknologi MARA),

Malaysia (till June 1998)

Graduate


Bahan] from Universiti Teknologi MARA (formerly Institut Teknologi

MARA), Malaysia (from October 1997 till 26/5/2007)

Graduate


Bahan] from Universiti Teknologi MARA (formerly Institut Teknologi

MARA), Malaysia (from 25/5/2007 till 24/4/2009)

Graduate

76 Bachelor of Science (Honours) in Quantity Surveying [Sarjana Muda

(Kepujian) Ukur Bahan] from Universiti Tunku Abdul Rahman , Malaysia

(from 20/1/2009 till 19/1/2011)

Graduate

77 Bachelor of Quantity Surveying (Honours) [Sarjana Muda Ukur Bahan

(Kepujian)] from Taylor’s University College, Malaysia (from 20/1/2009 till

19/1/2011)

Graduate

78 Bachelor of Quantity Surveying / Bachelor of Quantity Surveying with

Honours from Unitec Institute of Technology (formerly Carrington

Polytechnic), New Zealand (from October 1997 till October 2001)

Graduate

79 Diploma in Construction Economics from Dublin Institute / College of

Technology, Republic of Ireland (till October 2001)

Graduate

80 Diploma in Quantity Surveying from Limerick College of Art Commerce &

Technology, Republic of Ireland (till October 2001)

Graduate


Item Qualifications

Eligible

Class of

Membership

81 BSc Degree in Building from National University of Singapore (formerly

University of Singapore) (till May 1994)

Graduate

82 BSc (Hon) Degree in Building from National University of Singapore

(formerly University of Singapore) (from November 1995 till October 2001)

Graduate

83 BSc (Hons) Degree in Quantity Surveying (with the Construction Law subject

taken as compulsory elective) from Abertay Dundee University, Scotland, UK

(from October 1997 till October 2001)#

Graduate

84 BSc Degree in Quantity Surveying from Anglia Polytechnic University,

England , UK (November 1995)

Graduate

85 BSc (Hons) Degree in Quantity Surveying from Anglia Polytechnic

University, England , UK (from October 1997 till October 2001)

Graduate

86 BSc Degree in Building Economics and Measurement from University of

Aston, Birmingham, England, UK (till 1992)

Graduate

87 Diploma in Quantity Surveying from University of Central England,

Birmingham, England (formerly City of Birmingham Polytechnic), UK (till

January 1992)

Graduate

88 BSc (CNAA) Degree in Quantity Surveying from University of Central

England, Birmingham, England (formerly City of Birmingham Polytechnic),

UK (till January 1992)

Graduate

89 BSc Degree in Quantity Surveying from University of Central England,

Birmingham, England (formerly City of Birmingham Polytechnic), UK (May

1994)

Graduate

90 BSc (Hons) Degree in Quantity Surveying from University of Central England,

Birmingham, England (formerly City of Birmingham Polytechnic), UK (from

November 1995 till October 2001)

Graduate

91 BSc (CNAA) Degree in Quantity Surveying from University of Central

Lancashire, England (formerly Lancashire Polytechnic), UK (till January

1992)

Graduate

92 BSc Degree in Quantity Surveying from University of Central Lancashire,

England (formerly Lancashire Polytechnic), UK (May 1994)

Graduate

93 BSc (Hons) Degree in Quantity Surveying from University of Central

Lancashire, England (formerly Lancashire Polytechnic), UK (from November

1995 till October 2001)#

Graduate


Item Qualifications

Eligible

Class of

Membership

94 Polytechnic Associateship in Construction Economics from University of

Glamorgan, Wales (formerly Wales Polytechnic / Glamorgan Polytechnic),

UK (till January 1992)

Graduate

95 BSc (CNAA) Degree in Quantity Surveying from University of Glamorgan,

Wales (formerly Wales Polytechnic / Glamorgan Polytechnic), UK (till

January 1992)

Graduate

96 BSc Degree in Quantity Surveying from University of Glamorgan, Wales

(formerly Wales Polytechnic / Glamorgan Polytechnic), UK (May 1994)

Graduate

97 BSc (Hons) Degree in Quantity Surveying from University of Glamorgan,

Wales (formerly Wales Polytechnic / Glamorgan Polytechnic), UK (from

November 1995 till October 2001)#

Graduate

98 Diploma in Quantity Surveying from Glasgow Caledonian University,

Scotland (formerly Glasgow Polytechnic / Glasgow College of Building and

Printing), UK (till January 1992)

Graduate

99 BSc (CNAA) Degree in Quantity Surveying from Glasgow Caledonian

University, Scotland (formerly Glasgow Polytechnic / Glasgow College of

Building and Printing), UK (till January 1992)

Graduate

100 BSc Degree in Quantity Surveying from Glasgow Caledonian University,

Scotland (formerly Glasgow Polytechnic / Glasgow College of Building and

Printing), UK (May 1994)

Graduate

101 BSc (Hons) Degree in Quantity Surveying from Glasgow Caledonian

University, Scotland (formerly Glasgow Polytechnic / Glasgow College of

Building and Printing), UK (from November 1995 till 30/7/2007)

Graduate

102 Diploma in Quantity Surveying from University of Greenwich, England

(formerly Thames Polytechnic / Hammersmith School of Art & Building), UK

(till January 1992)

Graduate

103 BSc (CNAA) Degree in Quantity Surveying from University of Greenwich,

England (formerly Thames Polytechnic / Hammersmith School of Art &

Building), UK (till January 1992)

Graduate

104 BSc Degree in Quantity Surveying from University of Greenwich, England

(formerly Thames Polytechnic / Hammersmith School of Art & Building), UK

(May 1994)

Graduate

105 BSc (Hons) Degree in Quantity Surveying from University of Greenwich,

England (formerly Thames Polytechnic / Hammersmith School of Art &

Building), UK (from November 1995 till October 2001)#

Graduate


Item Qualifications

Eligible

Class of

Membership

106 BSc Degree in Building (QS Option) from Heriot-Watt University, Edinburgh,

Scotland, UK (till November 1995)

Graduate

107 BSc (Hons) Degree in Building (QS Option) from Heriot-Watt University,

Edinburgh, Scotland, UK (from October 1997 till October 2001)

Graduate

108 BSc Degree in Building Economics & Quantity Surveying from Heriot-Watt

University, Edinburgh, Scotland, UK (from 1973 till January 1992)

Graduate

109 BSc (Hons) Degree in Building Economics & Quantity Surveying from

Heriot-Watt University, Edinburgh, Scotland, UK (from 1987 till 2003)

Graduate

110 BSc (Hons) Degree in Quantity Surveying (formerly known as BSc (Hons)

Degree in Building Economics and Quantity Surveying) [With compulsory

elective subjects in Construction Technology 7 (D1.4AC1) during Term 1 of

Year 4 and Construction Technology 8 (D1.4AD2) during Term 2 of Year 4]

from Heriot-Watt University, Edinburgh, Scotland, UK (from 11/1/2003 till

12/1/2005)

Graduate

111 Diploma in Quantity Surveying from Kingston University, England (formerly

Kingston Polytechnic), UK (till January 1992)

Graduate

112 BSc (CNAA) Degree in Quantity Surveying from Kingston University,

England (formerly Kingston Polytechnic), UK (till January 1992)

Graduate

113 BSc Degree in Quantity Surveying from Kingston University, England

(formerly Kingston Polytechnic), UK (May 1994)

Graduate

114 BSc (Hons) Degree in Quantity Surveying from Kingston University, England

(formerly Kingston Polytechnic), UK (from November 1995 till October

2001)#

Graduate

115 Diploma in Building Economics from Leeds Metropolitan University, England

(formerly Leeds Polytechnic), UK (till January 1992)

Graduate

116 BSc (CNAA) Degree in Quantity Surveying from Leeds Metropolitan

University, England (formerly Leeds Polytechnic), UK (till January 1992)

Graduate

117 BSc Degree in Quantity Surveying from Leeds Metropolitan University,

England (formerly Leeds Polytechnic), UK (May 1994)

Graduate

118 BSc (Hons) Degree in Quantity Surveying from Leeds Metropolitan

University, England (formerly Leeds Polytechnic), UK (from November 1995

till October 2001)

Graduate

119 Diploma in Quantity Surveying from Liverpool John Moores University,

England (formerly Liverpool Polytechnic), UK (till January 1992)

Graduate


Item Qualifications

Eligible

Class of

Membership

120 BSc (CNAA) Degree in Quantity Surveying from Liverpool John Moores

University, England (formerly Liverpool Polytechnic), UK (till January 1992)

Graduate

121 BSc Degree in Quantity Surveying from Liverpool John Moores University,

England (formerly Liverpool Polytechnic), UK (May 1994)

Graduate

122 BSc (Hons) Degree in Quantity Surveying from Liverpool John Moores

University, England (formerly Liverpool Polytechnic), UK (from November

1995 till October 2001)#

Graduate

123 BSc (Hons) Degree in Commercial Management and Quantity Surveying from

Loughborough University of Technology, England, UK (from November 1995

till May 2004)

Graduate

124 BSc (Hons) Degree in Commercial Management and Quantity Surveying from

University of Manchester Institute of Technology (UMIST), England, UK

(from November 1995 till October 2001)

Graduate

125 BSc (CNAA) Degree in Quantity Surveying from Napier University, Scotland

(formerly Napier Polytechnic), UK (till January 1992)

Graduate

126 BSc Degree in Quantity Surveying from Napier University, Scotland (formerly

Napier Polytechnic), UK (May 1994)

Graduate

127 Diploma in Quantity Surveying from Napier University, Scotland (formerly

Napier Polytechnic), UK (November 1995)

Graduate

128 BSc (Hons) Degree in Quantity Surveying from Napier University, Scotland

(formerly Napier Polytechnic), UK (from November 1995 till October 2001)

Graduate

129 Diploma in Quantity Surveying from University of Northumberia at

Newcastle, England (formerly Newcastle-Upon-Tyne Polytechnic), UK (till

January 1992)

Graduate

130 BSc (CNAA) Degree in Quantity Surveying from University of Northumberia

at Newcastle, England (formerly Newcastle-Upon-Tyne Polytechnic), UK (till

January 1992)

Graduate

131 BSc Degree in Quantity Surveying from University of Northumberia at

Newcastle, England (formerly Newcastle-Upon-Tyne Polytechnic), UK (May

1994)

Graduate

132 BSc (Hons) Degree in Quantity Surveying from University of Northumberia at

Newcastle, England (formerly Newcastle-Upon-Tyne Polytechnic), UK (from

November 1995 till 25/7/2008)

Graduate


Item Qualifications

Eligible

Class of

Membership

133 Diploma in Quantity Surveying from The Nottingham Trent University,

England (formerly Nottingham Polytechnic / Trent Polytechnic), UK (from

May 1991 till January 1992)

Graduate

134 BSc (CNAA) Degree in Quantity Surveying from The Nottingham Trent

University, England (formerly Nottingham Polytechnic / Trent Polytechnic),

UK (from May 1991 till January 1992)

Graduate

135 BSc Degree in Quantity Surveying from The Nottingham Trent University,

England (formerly Nottingham Polytechnic / Trent Polytechnic), UK (May

1994)

Graduate

136 BSc (Hons) Degree in Quantity Surveying from The Nottingham Trent

University, England (formerly Nottingham Polytechnic / Trent Polytechnic),

UK (from November 1995 till October 2001)

Graduate

137 BSc (Hons) Degree in Quantity Surveying and Construction Cost Management

from The Nottingham Trent University, England (formerly Nottingham

Polytechnic / Trent Polytechnic), UK (from June 2002 till December 2004)

Graduate

138 BSc (Hons) in Quantity Surveying and Construction Cost Management from

The Nottingham Trent University, England (formerly Nottingham Polytechnic

/ Trent Polytechnic), UK (from 28/10/2008 till 29/10/20114)

Graduate

139 Diploma in Building Economics from University of Portsmouth, England

(formerly Portsmouth Polytechnic), UK (till January 1992)

Graduate

140 BSc (CNAA) Degree in Quantity Surveying from University of Portsmouth,

England (formerly Portsmouth Polytechnic), UK (till January 1992)

Graduate

141 BSc Degree in Quantity Surveying from University of Portsmouth, England

(formerly Portsmouth Polytechnic), UK (May 1994)

Graduate

142 BSc (Hons) Degree in Quantity Surveying from University of Portsmouth,

England (formerly Portsmouth Polytechnic), UK (from November 1995 till

August 2003)

Graduate

143 BSc (Hons) Degree in Construction Management (Quantity Surveying) from

University of Portsmouth, England (formerly Portsmouth Polytechnic), UK

(from August 1998 till February 2000)

Graduate

144 BSc Degree in Quantity Surveying from University of Reading, England, UK

(till May 1994)

Graduate

145 BSc (Hons) Degree in Quantity Surveying from University of Reading,

England, UK (from November 1995 till December 2004)

Graduate


Item Qualifications

Eligible

Class of

Membership

146 Diploma in Quantity Surveying from The Robert Gordon University, Scotland

(formerly Robert Gordon’s Institute / College of Technology, Aberdeen), UK

(till January 1992)

Graduate

147 BSc (CNAA) Degree in Quantity Surveying from The Robert Gordon

University, Scotland (formerly Robert Gordon’s Institute / College of

Technology, Aberdeen), UK (till January 1992)

Graduate

148 BSc Degree in Quantity Surveying from The Robert Gordon University,

Scotland (formerly Robert Gordon’s Institute / College of Technology,

Aberdeen), UK (May 1994 till November 1995)

Graduate

149 BSc (Hons) Degree in Quantity Surveying from The Robert Gordon

University, Scotland (formerly Robert Gordon’s Institute / College of

Technology, Aberdeen), UK (from October 1997 till May 2006) (refer to note

in section 3.8.20.4 above)

Graduate

150 BSc (Hons) Degree in Surveying from The Robert Gordon University,

Scotland (formerly Robert Gordon’s Institute / College of Technology,

Aberdeen), UK (from July 2006 till 26/5/07) (refer to note in section 3.8.20.5

above)

Graduate

151 BSc (Hons) Surveying from The Robert Gordon University, Scotland

(formerly Robert Gordon’s Institute / College of Technology, Aberdeen), UK

(from 25/5/2007 till 26/5/2010) (refer to note in section 3.8.20.6 above)

Graduate

152 BSc Degree in Construction Economics from University of Salford, England,

UK (full time courses from 1976 till 1983)

Graduate

153 BSc (Hons) Degree in QS & Construction Economics from University of

Salford, England, UK (full time courses from 1983 till 1991)

Graduate

154 BSc Degree in Quantity Surveying from University of Salford, England, UK

(part time courses from 1988 till 1990)

Graduate

155 BSc (Hons) Degree in Surveying (Quantity Surveying) from University of

Salford, England, UK (part time courses from 1991 till 2000)

Graduate

156 BSc (Hons) Degree in Quantity Surveying from University of Salford,

England, UK (part time courses from 1991 and full time courses from 1992 till

28/8/2007)

Graduate

157 BSc (Hons) in Quantity Surveying from University of Salford, England, UK

(from 29/8/2009 till 28/8/2010)

Graduate

158 BSc (Hons) Degree in Quantity Surveying from Sheffield Hallam University,

England (formerly Sheffield City Polytechnic), UK (from October 1997 till

October 2001)

Graduate


Item Qualifications

Eligible

Class of

Membership

159 BSc (Hons) Quantity Surveying from Sheffield Hallam University, England

(formerly Sheffield City Polytechnic), UK (from 25/10/2007 till 24/1/2009)

Graduate

160 BSc (CNAA) Degree in Building Economics from South Bank University,

England (formerly South Bank Polytechnic / Brixton School of Building), UK

(till January 1992)

Graduate

161 BSc (CNAA) Degree in Quantity Surveying from South Bank University,


(till January 1992)

Graduate

162 BSc Degree in Quantity Surveying from South Bank University, England

(formerly South Bank Polytechnic / Brixton School of Building), UK (May

1994)

Graduate

163 BSc (Hons) Degree in Quantity Surveying from South Bank University,


(from November 1995 till October 2001)#

Graduate

164 Diploma in Quantity Surveying from Staffordshire University, England

(formerly Staffordshire Polytechnic / Stoke-on-Trent Cauldon College of

Further Education), UK (till January 1992)

Graduate

165 BSc Degree in Quantity Surveying from Staffordshire University, England

(formerly Staffordshire Polytechnic / Stoke-on-Trent Cauldon College of

Further Education), UK (from January 1992 till May 1994)

Graduate

166 BSc (Hons) Degree in Quantity Surveying from Staffordshire University,

England (formerly Staffordshire Polytechnic / Stoke-on-Trent Cauldon College

of Further Education), UK (from November 1995 till October 2001)#

Graduate

167 BSc Degree in Quantity Surveying from University of Ulster at Jordanstown,

Northern Ireland, UK (till May 1994)

Graduate

168 BSc (Hons) Degree in Quantity Surveying from University of Ulster at

Jordanstown, Northern Ireland, UK (from November 1995 till October 2001)#

Graduate

169 Diploma in Building Economics from University of West England, Bristol,

England (formerly Bristol Polytechnic), UK (till January 1992)

Graduate

170 BSc (CNAA) Degree in Quantity Surveying from University of West England,

Bristol, England (formerly Bristol Polytechnic), UK (till January 1992)

Graduate

171 BSc Degree in Quantity Surveying from University of West England, Bristol,

England (formerly Bristol Polytechnic), UK (May 1994)

Graduate


Item Qualifications

Eligible

Class of

Membership

172 BSc (Hons) Degree in Quantity Surveying from University of West England,

Bristol, England (formerly Bristol Polytechnic), UK (from November 1995 till

October 2001)#

Graduate

173 BSc (Hons) Degree in Quantity Surveying and Commercial Management from

University of West England, Bristol, England (formerly Bristol Polytechnic),

UK (from 16/12/2004 till 15/12/2006)

Graduate

174 BSc (Hons) in Quantity Surveying and Commercial Management from

University of West England, Bristol, England (formerly Bristol Polytechnic),

UK (from 16/12/2006 till 15/12/2009)

Graduate

175 Diploma in Quantity Surveying from University of Westminster, England

(formerly Polytechnic of Central London), UK (till January 1992)

Graduate

176 BSc (CNAA) Degree in Quantity Surveying from University of Westminster,

England (formerly Polytechnic of Central London), UK (till January 1992)

Graduate

177 BSc Degree in Quantity Surveying from University of Westminster, England

(formerly Polytechnic of Central London), UK (May 1994)

Graduate

178 BSc (Hons) Degree in Quantity Surveying from University of Westminster,

England (formerly Polytechnic of Central London), UK (from November 1995

till October 2001)#

Graduate

179 BSc (Hons) Degree in Quantity Surveying from University of Wolverhampton,

England, UK (from November 1995 till December 2004) (refer to note in


Graduate

180 BSc (Hons) Commercial Management and Quantity Surveying from

University of Wolverhampton, England, UK (September 2005 intake only –

from 30/9/2005 till 31/8/2006)

Graduate

181 Diploma in Surveying (QS Option) from College of Estate Management,

England, UK (from May 1991 till August 2003)

Graduate

182 BSc Degree in Quantity Surveying (External) from College of Estate

Management, England, UK (from September 2002 till 8/10/2007)

Graduate

183 BSc (Hons) (External) Degree in Quantity Surveying from College of Estate

Management, England, UK (from 28/10/2008 till 29/10/2011)

Graduate

184 Diploma in Quantity Surveying from Dundee Institute of Technology,

Scotland (formerly known as Dundee College of Technology), UK (till

February 2000)

Graduate

185 BSc (CNAA) Degree in Quantity Surveying from Dundee Institute of

Technology, Scotland (formerly known as Dundee College of Technology),

UK (till February 2000)

Graduate


Item Qualifications

Eligible

Class of

Membership

186 BSc / BSc (Hons) Degree in Quantity Surveying from Dundee Institute of

Technology, Scotland (formerly known as Dundee College of Technology),

UK (from November 1995 till February 2000)

Graduate

187 Diploma in Quantity Surveying from Northern Ireland Ulster Polytechnic, UK

(till February 2000)

Graduate

188 BSc (CNAA) Degree in Quantity Surveying from Northern Ireland Ulster

Polytechnic, UK (till February 2000)

Graduate

189 Professional Diploma in Construction Economics from Regional Technical

College, Limerick, Northern Ireland, UK (from November 1995 till October

2001)

Graduate

190 An Associate Member of the New Zealand Institute of Quantity Surveyors Graduate

191 An Associate Member of the Institute of Quantity Surveyors, Australia with

ISM recognized qualifications

Graduate

192 A Member of Institute of Quantity Surveyors, UK (prior January 1992) Graduate

193 Diploma from Institute of Quantity Surveyors, UK (from May 1991 till

November 1995)

Graduate

194 Diploma from the Royal Institution of Surveyors, UK (from January 1992 till

September 2002)

Graduate

195 Pass Final/Direct Final Examination of the Royal Institution of Chartered

Surveyors (from January 1992 till September 2002)

Graduate

196 Pass in the Final Examination of the Graduate Entry Scheme (GES) of the

Royal Institution of Chartered Surveyors (from October 1997 till September

2002)

Graduate

197 Passed the Joint Test of Professional Competence in Quantity Surveying

jointly conducted by the Board of Quantity Surveyors, Malaysia and the QS

Division of ISM

Member

198 Satisfied the requirements set out under the special entry scheme (as approved

by the Council during Session 1998/1999) as attached in Appendix A

Member

199 A Member or Fellow of the Royal Institution of Chartered Surveyors, U.K.

with ISM recognized qualifications (subject to an interview with the Council

or QS Division committee members) (as approved by the Council during

Session 2006/2007)

Member

List of Recognised University - All Divisions1. Main Cover2. Foreword - RSM List of Recognised Qualifications2. RISM-GLS Qualifications - 30 Nov 2012

2. RISM -PMVS Qualifications 30 Nov 20122. ISM-BS Qualifications_ 30 Nov 2012

quantity surveying divisionrism.org.my/wp-content/uploads/2014/10/rism-qs-qualifications.pdf ·...

Documents