providing the solution for ikea - nicholson study rooftrak ifp integrated fixing point the rooftrak...
TRANSCRIPT
case study
Solar PV installation at IKEA Distribution
Centre
The Rooftrak IFP provided a vital part of the package to install solar
PV on the vast roof areas of the Ikea Distribution & Contact Centre in
Peterborough where approximately 2800 PV panels have been
installed as part of its People & Planet Positive Strategy.
The roof construction of the huge Peterborough depot was not
strong enough to support the added load of a ballasted PV
installation on top of the existing roof structure.
This is an important aspect that has to be considered when
retrofitting PV panels to existing buildings and structures where,
especially for commercial installations, the weight the of ballast
required to keep the PV panels stable, can be in excess of the
loadbearing capacity of the roof in question.
The PV installation was designed and installed by Kingspan Energy
who were able to avoid using ballast altogether by using the
Rooftrak IFP Integrated Fixing Point. The IFP provides a mechanical
fixing directly to the building structure through the existing
weathering membrane without compromising the integrity of the
roofing membrane already fitted to the building.
The IFP provides a series of connection points to the structure to
which the PV installation can be attached.
Solar PV installation at IKEA Distribution Centre
case study
Rooftrak IFP Integrated Fixing Point
The Rooftrak IFP was utilised on the IKEA building to provide a
low profile fixing point to which the solar PV array could be fixed.
The benefit of using the IFP was that it could be installed on the
existing single ply membrane roof with external access only being
required. No internal access or removal of membrane or
insulation was not required. Importantly, this allowed the
Distribution Centre to keep operating as normal with the minimum
of disruption during the installation process.
Solar PV installation at IKEA Distribution Centre
case study
Rooftrak IFP Integrated Fixing Point
Each IFP has provision for multiple fixings through to the roof deck providing
Kingspan Energy with a fixing point with a quantifiable pull-out value for
integrating into the design of the roof top PV installation at the IKEA Distribution
Centre in Peterborough.
The IFP can be fitted with any available single ply or bituminous roofing
membrane and is suitable for use on warm or cold roof constructions.
For ore information on the Rooftrak-IFP, please contact Nicholson on
0845 0098 980 or visit our website.
See more Nicholson case studies
Solar PV installation at IKEA Distribution Centre
Follow