product cataloguerack is double loaded. a solid fastening and safety tie-off kit is included in each...
TRANSCRIPT
product catalogue
1
The name says it all... SOLID RACKS.™ Strength, reliability and integrity, that’s our SOLID promise.
SOLID RACKS was born from a strong demand for structurally sound racking systems and has spent the past 2 years meticulously developing and testing this unique new range of storage products that have been thoroughly weight tested and built to last.
SOLID RACKS are endorsed and used by world champion surfers across the globe.
With over 20 years of building and design experience, the team at SOLID believes in producing storage solutions that are durable, ergonomic and of superior finish and performance. SOLID prides itself on attention to detail and has won numerous business and manufacturing awards which we believe sets us apart from our competitors.
SOLID RACKS is an Australian family owned and operated company incorporating its own manufacturing plant in Sydney Australia.
Go to our website www.solidracks.com to check us out!
Happy surfing and SOLID swells from the team at SOLID.
SOLID RACKS are endorsed and used by world champion surfers across the globe.
2
Product Code Page
SOLID 8 Rack SR-901W 3
SOLID 4 Rack SR-902W 4
SOLID Surf & Snow Ceiling Rack SR-903W 5
SOLID Surf Craft Ceiling Rack SR-904W 6
SOLID 2 Rack Accessory SA-905W 7
SOLID 12 Rack SR-906W 8
SOLID 9 Angled Rack SR-907W 9
SOLID Freestanding Vertical Shortboard Display SD-908W – boards with fins SD-9081W – boards without fins
10
SOLID Freestanding Vertical Mal Display SD-909W – boards with fins SD-9091W – boards without fins
11
SOLID Freestanding Vertical 6 Linked Display SD-910W – boards with fins SD9101W – boards without fins
12
SOLID Plywood Single Display SD-912PW 13
SOLID Paddle Board Rack SR-9183MP – holds 3SR-9186MP – holds 6
14
SOLID Mobile Display Cabinet SD-913DHW – drawers 4 horiz SD-913OHW – open 4 horiz SD-913DVW – drawers 4 vertical SD-913OVW – open 4 vertical
15
Product Code Page
SOLID Snow & Skate Rack SR-911W 16
SOLID Snow Ski Rack SR-923W 17
SOLID Freestanding Double Sided Display SD-917W 18
SOLID Mobile Multipurpose Rack SR-915W SR-915PW
19
SOLID Mobile Contest Rack SR-916W 20
SOLID Double Wall & Floor Horizontal Display SD-919W 21
SOLID Surfboard Tail Protector SA-914SSB – square/small SA-914SMB – square/medium SA-914SLB – square/large SA-914AMB – angled/medium SA-914ALB – angled/large
22
SOLID Foam Protector Strip SA-921SSB – square/small SA-921SLB – square/large SA-921ASB – angled/small SA-921ALB – angled/large
23
SOLID Foam Tubes SA-9242G –22mm SA-9245G – 25mm
23
SOLID Roll Dispenser Rack SR-922W 24
SOLID Fishing Rack SR-920W SR-9201W
25
SOLID Mobile Display Box SD-925W 26
Quick product reference guide
3
safety tie-off
The SOLID 8 Rack is wall-mounted and holds either 4 surfboards horizontally or 8 surfboards vertically. It can be double loaded where fins are detachable to accommodate 8 boards horizontally or up to 16 boards vertically, provided the SOLID load limit of 17kgs per two horizontal supports is not exceeded.
This SOLID storage system is a best seller because it provides the perfect solution for everyone by allowing individual customisation in height, length and width.
The SOLID 8 RACK comes fully assembled, with a SOLID fastening and safety tie-off kit provided.
Works in conjunction with SOLID Tail Protector SA‑914B, SOLID Foam Protector Strip SA‑921B, SOLID 2 Rack Accessory SA‑905W and SOLID 4 Rack SR‑902W.
SOLID™ 8 RackSR-901W
Dimensions: 740mm L x 80mm W x (450mm from back board to tip of foam dowel) x 33mm thick back board. 140mm between foam dowels.
4
The SOLID 4 Rack is wall-mounted and will hold 4 boards with fins vertically or up to 8 boards with detachable fins vertically when the rack is double loaded.
A SOLID fastening and safety tie-off kit is included in each pack.
Works in conjunction with SOLID Tail Protector SA‑914B, SOLID Foam Protector Strip SA‑921B, SOLID 2 Rack Accessory SA‑905W and SOLID 8 Rack SR‑901W.
SOLID™ 4 Rack SR-902W
Dimensions: 740mm L x 80mm W x (450mm from back board to tip of foam dowel) x 33mm thick back board. 140mm between foam dowels.
5
The SOLID Surf & Snow Ceiling Rack will hold 2 shortboards or mals with fins or up to 4 boards with detachable fins, not exceeding the massive load limit of 50kgs!
Easy and simple to install, this SOLID ceiling system is a revolution in surf craft storage – SOLID adjustable foam dowels are removable and ROLL to enable effortless loading.
These racks will also store many other items including snow skis, wakeboards, snowboards and numerous household items.
You can even hang your wetsuits to dry off this SOLID RACK!
Dimensions: Internal measurements – 1025mm L x 664mm W x 330mm D; 330mm internal depth for single load; 140mm internal depth for double loading; External measurements – 1135mm L x 700mm W x 440mm D.
SOLID™ Surf & Snow Ceiling Rack (Patent pending)
SR-903W
A SOLID InDuStry fIrSt
Works in conjunction with SOLID 2 Rack Accessory SA‑905W.
6
The SOLID Surf Craft Ceiling
Rack is a simple, SOLID and safe
storage solution for those big
cumbersome items that clutter
your backyard and garage.
This rack is Big Brother to the
revolutionary SOLID Surf &
Snow Ceiling Rack and will
hold either one large surf craft
(eg: kayak, surf-ski), or 2 large
boards (mals, paddleboards),
or up to 4 long boards with
detachable fins (or any
combination not exceeding the
50kg load limit).
SOLID ceiling racks are easy
to install and the removable and
adjustable foam dowels ROLL
to create effortless loading of
all your heavy surf craft. They
can also be installed under your
house if you have the clearance.
Available in larger custom
versions of galvanised steel
and plywood upon request.
SOLID™ Surf Craft Ceiling Rack (Patent pending) SR-904W
Dimensions: Ceiling rack with no accessories: Internal measurements – 1700mm L x 765mm W x 385mm D; 385mm internal depth for single load; 170mm internal depth for double loading; External measurements – 1800mm L x 800mm W x 500mm D.
Works in conjunction with SOLID 2 Rack Accessory SA‑905W.
7
Dimensions: 365mm L x 80mm W x (450mm D from base to tip of foam dowels).
The SOLID 2 Rack Accessory is a multifunctional addition to the SOLID Racks range and works in three different ways:
1. When fastened to your SOLID Ceiling Rack system, the 2 Rack Accessory is designed to hold an additional 2 surfboards or extra snow gear, extending your ceiling storage area.
2. Installed independently as a stand-alone rack, this SOLID baby will hold 4 boards vertically or 2 horizontally and can be double-loaded when stowing boards with detachable fins.
3. The SOLID 2 Rack Accessory can be used to expand any SOLID wall-mounted racks to create additional vertical or horizontal storage space.
A SOLID fastening and safety tie-off kit is included in each pack.
SOLID™ 2 Rack AccessorySA-905W
Works in conjunction with SOLID Surf & Snow Ceiling Rack SR‑903W, SOLID Surf Craft Ceiling Rack SR‑904W, SOLID Tail Protector SA‑914B and the entire SOLID wall‑mounted rack range.
8
The SOLID 12 Rack will hold 12 surfboards vertically of different shapes and sizes with fins, or up to 24 boards with detachable fins.
2 SOLID 12 Racks will store 12 surfboards horizontally of different shapes and sizes with fins, or up to 24 with detachable fins.
SOLID 12 Racks are cleverly designed with a vertical height of 2400mm to fit all standard garage ceilings.
SOLID 12 Racks have been installed in Surf Retail outlets nationwide, proving their strength and reliability as well as their SOLID brand appeal.
SOLID stainless steel safety tie-offs included.
Works in conjunction with SOLID Tail Protector SA‑914SLB and SOLID Foam Protector Strip SA‑921SLB.
SOLID™ 12 Rack SR-906W
Dimensions: 2400mm L x 80mm W x (450mm D from base to tip of foam dowel).
fOr the SerIOuS SOLID Surfer
9
SpAce OptImISer!
Designed for installation areas where space is more limited, the SOLID 9 Angled Rack holds a large quantity of boards easily and efficiently. The SOLID angle is utilised to create a reduction in depth and an improvement in board visability.
The depth of this rack has been condensed from the 450mm depth of our standard racks to 380mm, allowing floor space to be maximised. It is an ideal SOLID storage solution for surf retail outlets or wherever floor space is limited.
SOLID stainless steel safety tie-offs are provided with this rack for extra security so that your boards are protected from damage at all times.
Dimensions: 2400mm L x 80mm W x (400mm internal D from base to tip of foam dowel).
SOLID™ 9 Angled Rack SR-907W
Works in conjunction with SOLID Angled Tail Protector SA‑914ALB and SOLID Angled Foam Protector Strip SA‑921ALB.
10
Dimensions: Single assembled unit – 780mm H x 670mm W x 323mm D.
SOLID™ Freestanding Vertical Shortboard Display (Patent pending)
SD-908W – boards with fins SD9081W – boards without fins
A SOLID design to universally accommodate many different styles of shortboards, the SOLID Freestanding Vertical Shortboard Display allows you to store anything from a grommets micro shorty to a fish, mini mal, quad or gun by the use of self adjustable foam arms and a padded fin or tail support.
This unique SOLID system uses a combination of MDF and aluminium to create a SOLID upright display for the proud surfer’s favourite stick.
This SOLID solution will impress your partner by de-cluttering space. Don’t lean your board up against a wall so it can get damaged, keep your board safe, neat and protected while creating a SOLID display!
Sturdy and sculptural, this SOLID system won’t tip over and makes a real SOLID statement in any home or retail outlet. The feet are detachable for flat storage when not in use.
So if you’re a tragic and want to show off your most prized possession, then the SOLID Freestanding Vertical Shortboard Display is for you!
fOr yOur fAvOurIte StIck
11
Dimensions: 1180mm H x 670mm W x 388mm D.
The SOLID Freestanding Vertical Mal Display Rack is a modification of the original SOLID Surfboard Vertical Display Rack. Serving the same purpose as its short-board counterpart, the Mal Display is a larger version that accommodates varying sizes of mals and longboards.
Specifically designed for longer, taller boards, the SOLID Freestanding Vertical Mal Display has extended arms to grab the board further up its
rails for added security together with a SOLID extension of the padded base support to ensure the tail doesn’t come into contact with the ground.
If your ceiling is high enough to take your mal vertically, this is the SOLID RACK for you!
Ideal for surf retail outlets wishing to display their most precious eye catching and collectable longboards.
SOLID™ Freestanding Vertical Mal Display (Patent pending)
SD-909W – boards with fins SD9091W – boards without fins
12
Dimensions: 780mm H x 670mm W x 1200mm L.
The SOLID Freestanding Vertical 6 Linked Display stows 6 surfboards independently, using SOLID patented foam grips to hold each board safely and securely while maximising their individual visual appeal.
This SOLID display made it’s head-turning debut at the Quiksilver Pro WCT on the Gold Coast in ‘09 receiving great praise from the cream of the surfing industry.
The 2 SOLID side supports can be customised in length to stow any multiple number of boards. It is an ideal and
adaptable unit for surf retail outlets who want to display boards in an eye catching line with maximum style and SOLID security. Additional spacing is provided to allow for boards with bigger fins.
This SOLID product is also available in a Mal Vertical Display option and an option to display boards without fins for retailers who want to maximise their display space.
SOLID™ Freestanding Vertical 6 Linked Display(Patent pending)
SD-910W – boards with fins SD-9101W – boards without fins
IcOnIc DeSIgn
13
Dimensions: 780mm H x 670mm W x 1200mm L.
SOLID™ Plywood Single Display SD-912PW
OLD SchOOL fAvOurIte
Dimensions: 100mm W x 240mm Deep out from wall.
The SOLID Plywood Single Display allows complete customisation when installed on your wall and holds any single surfboard horizontally, from fibreglass surfboards to timber mals and collectables.
This SOLID 1960’s inspired design is constructed using traditional SOLID laminating techniques. Classic and elegant, the SOLID Plywood Single Display is an ‘old School’ favourite for displaying your
precious old boards or brand spankers on your wall for all to see.
Note: this rack comes as a set only.
14
Dimensions: 3 arm model: 1070mm H x 850mm D x 240mm between rails. 6 arm model: 2100mm H x 850mm D x 168mm between rails.
The SOLID Paddle Board Rack was initially custom-designed for Tom Carroll to store his new obsession the paddleboard, which was introduced to him in Hawaii.
SOLID Paddle Board Racks are available in both 6 rack and 3 rack versions and have
been specifically designed and constructed to horizontally store any heavy surfcraft of up to 50 kgs in weight (per 2 horizontal supports).
This unique SOLID system will display your massive quiver with ease. It can also safely and effortlessly store the biggest mals, kite boards, sail boards or any other type of board that fits the storage space. If your wall is strong enough then this SOLID monster rack will do the work for you.
The SOLID Paddle Board Rack is constructed from durable marine grade ply. Built to with-stand the elements, this rack is perfect for outdoor installation.
SOLID vinyl padding covers every arm of this rack, so when lifting the heaviest beast, damage is avoided and your expensive weapons are safe, SOLID and protected.
This SOLID design can also be modified to hold other types
of surfcraft and can be tailored to suit your individual needs.
Ideal for surf clubs and surf craft retailers.
Note: This rack comes as a set only. Custom units are available on request.
SOLID™ Paddle Board RackSR-9183MP – holds 3 SR-9186MP – holds 6
15
The SOLID Mobile Display Cabinet will hold 4 boards horizontally or 4 boards vertically as well as storing anything from wet suits to leg-ropes, tail-pads, fins, clothes and shoes in the 2 deep drawer units underneath, or the two optional SOLID open compartments.
This SOLID multifunctional Mobile Display Unit is a must for any surfer who lives in a rented premises and wants to take good care of their boards and other valuables.
The SOLID Mobile Display Cabinet comes with heavy-duty castors for portability – take it
with you wherever you go, a real SOLID investment!
The 4 vertical board version is supplied complete with 800mm long SOLID Surfboard Tail Protector (SA-914SSB).
SOLID™ Mobile Display CabinetSD-913DHW – drawers 4 horiz SD-913OHW – open 4 horiz SD-913DVW – drawers 4 vertical SD-913OVW – open 4 vertical
Works in conjunction with SOLID Tail Protector SA‑914B and SOLID Foam Protector Strip SA‑921B.Dimensions: 1270mm H x 1200mm W x 580mm D drawer unit. Drawers internal: 170mm H x
516mm W x 470mm D. Open compartments internal: 210mm H x 574mm W x 530mm D.
16
The SOLID Snow & Skate Rack is an ideal product for anyone who requires a SOLID storage system for their expensive sporting equipment. It will horizontally hold 4 snowboards, skateboards, sets of snow skis, wake-boards, water skis or any combination not exceeding the 17kg weight limit per 2 horizontal supports.
The SOLID Snow & Skate Rack is a versatile and multi-functional system which can also be installed for vertical storage if required, allowing installation to suit your individual storage needs.
It is a shallow version of our SOLID 8 Rack and has the clearance to stow your snowboard without having to detach its bindings.
The SOLID Snow & Skate Rack will maximise precious storage space in your home, garage or lodge.
Note: This rack comes as a set only.
Works in conjunction with SOLID Foam Protector Strip SA‑921B and SOLID Tail Protector SA‑914B.
Dimensions: Single: 740mm H x 80mm W x (305mm from back board to tip of foam dowel).
SOLID™ Snow & Skate RackSR-911W
17
Dimensions: 780mm H x 80mm W x (133mm from back board to tip of foam dowel).
The SOLID Snow Ski Rack holds 3 sets of snow skis vertically between SOLID heavy-duty foam dowels. Skis are thus kept safe and SOLID, preventing damage
and allowing you to manage
space in your home or garage
efficiently and effectively.
A lockable SOLID Snow
Ski System for lodges and retailers is also available upon request.
SOLID™ Snow Ski Rack SR-923W
Works in conjunction with SOLID Surfboard Tail Protector SA‑914B.
18
The SOLID Freestanding Double Sided Display unit combines the design, strength and reliability of the SOLID brand with a huge board storage capacity.
22 separate SOLID bays can be loaded with boards of any shape or size, and if the boards
have detachable fins you can double this massive capacity.
This SOLID yet light-weight display is easy to move and has been constructed for long term durability. It is also available in a mobile version complete with heavy-duty, lockable castors.
The SOLID Tail Protector
and SOLID Foam Protector
Strip (included) are integral to
every aspect of this system,
giving you peace of mind
when customers check out
your most valuable boards
and collectables.
The SOLID Freestanding Double Sided Display is the ultimate in surfboard storage and display and is used by numerous surfboard retailers across Australia.
Custom sizes and units available upon request.
SOLID™ Freestanding Double Sided DisplaySD-917W
Dimensions: 1200mm H x 2400mm W x 954mm D.
SOLID retAIL DISpLAy
19
Dimensions: 1930mm H x 1200mm W x 750mm D.
The SOLID Multipurpose Rack has the capacity to hold and stack multiple types of surf craft.
The unique design of this unit enables it to store a huge variety of SOLID surf craft and sporting equipment including surfboards, surf skis, canoes, kite boards, wakeboards, snowboards and some paddleboards (depending on width). It will store any item over 1060mm long and less than 660mm wide.
This clever and durable construction has a stainless steel welded external frame and heavy-duty castors, allowing the unit to be easily moved yet SOLID when fully
stacked. The removable foam rods provide multiple solutions and flexibility when it comes to storing any surfcraft.
Ideal for retailers, surf clubs and competitions.
Weight tested to hold 25kgs per 2 supports.
Available in MDF or Plywood.
SOLID™ Mobile Multipurpose RackSR-915W SR-915PW
20
The SOLID Mobile Contest Rack has been designed to provide a top class storage facility for competitor’s surfboards and sponsor advertising during Pro Surfing Events.
With it’s new slick SOLID design, this unit stores up
to 9 boards with fixed fins vertically, keeping them safe, well spaced and damage-free. It is designed to enable multiple units to link up back to back or side-to-side and comes with heavy duty lockable castors for added manoeuvrability.
Sponsors and retailers are able to display their own corporate signage at the top and back of this unit – (as pictured) a SOLID way to get your brand noticed!
Already appearing with major notoriety and acclaim at many surf events around Australia, this SOLID rack is the perfect mobile solution for contests, sponsors, retail display and surf clubs.
SOLID Tail Protector and SOLID Foam Protector Strip included.
SOLID™ Mobile Contest RackSR-916W
Dimensions: 1370mm H x 1800mm W x 700mm D. Sponsor signage: Double sided: 8mm thick x 1757mm W x 900mm H – sign not included.
21
Dimensions: Single: 525mm H x 430mm W (out from wall) x 87mm between supports.
The SOLID Double Wall & Floor Horizontal Display holds 2 surfboards or 2 mals horizontally and can either be wall-mounted or sit freestanding on your floor without fastenings.
Utilising 2 functions, this rack not only stores your surfboards or mals, it also creates a safe and attractive display. Stow your old sticks or show off your new boards – create a SOLID centre-piece in any room!
The SOLID Double Wall & Floor Horizontal Display is ideal for retailers or the proud
surfer who wants his boards to be safe and also look great when they are not in use.
Note: this rack comes as a set only.
SOLID™ Double Wall & Floor Horizontal DisplaySD-919W
22
Designed to prevent unwanted damage to your valuable boards, SOLID has developed a clever solution, which ensures that your boards and fins have better stability and added protection.
Allowing your surfboard to lock in on the ground, our extremely durable SOLID Foam actually ‘grips’ and is ideal for keeping
your board’s tail in a SOLID, stable and safe groove. It prevents any damage from movement when taking your valuable items in and out of your SOLID rack.
Works in conjunction with any SOLID Vertical Rack or SOLID Display.
SOLID™ Surfboard Tail ProtectorSA-914SSB – Square/Small SA-914SMB – Square/Medium SA-914SLB – Square/Large SA-914AMB – Angled/Medium SA-914ALB – Angled/Large
Dimensions: Comes in 3 sizes: 800mm L x 480mm W, 1600mm L x 480mm W, 2400mm L x 480mm W. 25mm thick per sheet. Custom Sheets available upon request.
23
SOLID™ Foam TubesSA-9242G – 22mm SA-9245G – 25mm
Dimensions: Comes in 2 sizes: 740mm L x 80mm W, 2400mm L x 80mm W x 10mm thick. Custom strips available upon request.
This SOLID accessory is easily fitted to many racks in the SOLID range and requires no glue or fastenings to install – it simply slips over the SOLID timber dowels to protect your surfboard’s rails.
The SOLID Foam Protector Strip comes in 2 lengths
and angles, and fits snugly to the backboard of our SOLID RACKS range.
SOLID™ Foam Protector StripSA-921SSB – Square/Small SA-921SLB – Square/Large SA-921ASB – Angled/Small SA-921ALB – Angled/Large
Ideal for surf shops where old rubber tubes have deteriorated. SOLID Foam Tubes will not perish or become tacky. Our 10mm thick foam is extremely robust and will prevent
damage to your most precious surfboards and surf craft.
We can also cut to size our own SOLID flexible vinyl sheeting – available upon request.
Dimensions: Solid Foam Tubes come in 2 dowel hole sizes: 22mm & 25mm and can be cut to size up to 2 metres long.
Works in conjunction with: All SOLID dowel products.
Works in conjunction with: SOLID 2 Rack Accessory SA-905W, SOLID 4 Racks SR-902W, SOLID 8 Racks SR-901W, SOLID 9 Angled Racks SR-907W and SOLID 12 Racks SR-906W.
24
Dimensions: 1200mm H x 240mm D x 1030mm maximum variable internal dowel width.
This unique, easy-to-use SOLID system was initially designed for surfboard shapers and glassers to hold heavy fibre-glass cloth rolls, enabling ease of application of cloth onto surfboard blanks.
However, the SOLID Roll Dispenser Rack can hold fabric, paper, plastic and vinyl – in fact anything stored in rolls – making it ideal for surfboard shapers, signage companies, textile outlets, paper & gift wrapping suppliers and packaging distributors.
The SOLID Roll Dispenser Rack is wall mounted and has 7 variable adjustments so you
can customise your hanging requirements. Simple, easy to use, SOLID and strong – what more can we say?
SOLID™ Roll Dispenser RackSR-922W
SOLID AnD StrOng!
25
Dimensions: Single: 790mm H x 100mm W back board x 140mm D.
The SOLID Fishing Rack Single or Set is a great space optimiser and is the ideal storage solution for the avid angler.
SOLID Fishing Racks have 4 installation options:
1. The SOLID Fishing Rack Set can be installed on your wall or ceiling (as pictured) and will stow 5 rods and reels horizontally.
2. The SOLID Fishing Rack Set can also be installed horizontally end to end onto a wall to create an upright floor
standing system that will stow 10 rods and reels vertically.
3. The SOLID Fishing Rack Single, installed horizontally onto a wall creates an independent upright floor standing system that will stow 5 rods and reels vertically.
4. The SOLID Fishing Rack Single or Set can be added to any of the above configurations to provide additional ceiling or wall span support for extra long beach or tournament fishing rods.
SOLID™ Fishing RackSR-920W – SOLID Single SR9201W – SOLID Set
SOLID Fishing Racks can be individually custom installed to suit any angler’s storage needs.
26
Dimensions: 670mm H x 580mm W x 390mm D.
SOLID™ Mobile Display BoxSD-925W
The SOLID Mobile Display Box is a mobile rack storage unit designed to carry 4 packs of SOLID 8 RACKS for retail sale.
The SOLID Box comes free with the initial purchase of 8 packs of our original SOLID 8 Racks (SR-901W).
Meeting OH&S requirements, the SOLID Box makes mobility for your staff a breeze whilst requiring a minimum of space. Presentation is clean and compact, and your SOLID racks look professional, attractive and neat in any retail space.
Worth over $200, the SOLID Box has been widely accepted by retailers as a major visual selling point in their stores. Make sure you enquire about the SOLID Mobile Display Box if you wish to become a SOLID Stockist.
free SOLID bOx!
27
At SOLID™ we keep an open mind, with high aspirations for future development. We are constantly inventing new products and storage solutions for your valuable equipment and we will continue to strive to meet our consumers’ needs.
The environment is of key concern to the team at SOLID,™ after all we wouldn’t be designing and building racks for many different sports without Mother Nature giving us the platform for these activities to be performed. SOLID™ is consistently thinking toward the future and hence utilises initiatives such as recycling and environmentally friendly materials wherever possible.
Meeting a SOLID™ market need, we will keep our SOLID™ promise to produce SOLID™ systems that are BUILT TO LAST.™ With more products currently under development, SOLID RACKS™ aspires to remain the World’s #1 choice for simple, SOLID™ and safe storage solutions.
All sizes and dimensions were correct at time of printing.
Note: Several products depicted in this catalogue are subject of Pending Patent applications.
Wood Appeal Pty Ltd & SOLID RACKS reserves the right to change, modify, edit or withdraw any of their advertised products, at any time without notice or the incurrence of any liability whatsoever.
SOLID RACKS is a division of Wood Appeal Pty Ltd.
SOLID, SOLID RACKS and the ‘S’ (stylised) logo are trade marks, and the ‘S’ (stylised) SOLID logo is a registered trade mark, of Wood Appeal Pty Ltd. Copyright © 2009. Wood Appeal Pty Ltd. All rights reserved. G
raph
ic d
esig
n by
Bec
Cro
cket
t. Il
lust
ratio
ns b
y C
aspi
an d
e Lo
oze.
Pho
togr
aphy
by
Ric
hard
Whi
tbre
ad.
www.solidracks.com
The team at SOLID RackS are consistently developing strong, reliable products that perform and provide the quality and craftsmanship our customers deserve, which is integral to our worldwide success.
Gra
phic
des
ign
by B
ec C
rock
ett.
Illu
stra
tions
by
Cas
pian
de
Looz
e. P
hoto
grap
hy b
y R
icha
rd W
hitb
read
.
www.solidracks.comSOLID RACKS is a division of Wood Appeal Pty Ltd. Sydney, AUSTRALIA. Email: [email protected] Phone: +61 2 9905 9228 Fax: +61 2 9905 7374 Units 1 & 2, 2-4 William St, Brookvale NSW 2100 Australia.
SOLID RACKS is proud to be an Australian owned and operated company who are creating jobs for Australian families.