CN2000®B  PRODUCT  DATA  SHEET  

Kelso  Coatings,  a  division  of  Kelso  Industrial  Group.    Formerly  Revolutionary  Concrete  Solutions  Inc.    1  

Cementitious� Capillary� Crystalline� Waterproof� Material�Description:� �The  waterproof  material  CN2000®B  has  an  Eka-­‐molecular  sieve  structure  with  a  permeation  crystalline  effect.  The  applied  waterproof  layer  has  breathing,  waterproofing  and  anti-­‐corrosion  abilities.  

CN2000®B  is  cementitious  and  will  firmly  adhere  to  concrete  and  becomes  an  integral  part  of  the  structure.  CN2000®B  contains  active  substances  and  under  its  catalysis,  hydration  is  promoted,  and  a  new  insoluble  crystalline  structure  is  produced,  which  blocks  the  passage  of  water  and  enhances  compressive  strength,  bending  strength,  and  the  impervious  pressure  of  the  base  structure.    

Also,  when  new  cracks  occur  (to  a  width  of  0.4mm),  in  the  presence  of  water,  the  newly  formed  crystalline  can  realize  self-­‐healing  capabilities.    CN2000®B  effectively  protects  reinforced  concrete  structures  from  water  and  dissolved  corrosive  materials  and  enhances  their  durability.    

Applications:� �CN2000®B  can  be  utilized  in  the  following  projects  for  waterproof  and  anticorrosion  in  structurally  sound  concrete  structures  -­‐  new  or  old,  either  at  the  water  side  or  the  air  side  of  a  concrete  structure:  

Highway  Overpass  Structures  Bridges  and  Piers    Underground  and  Tunnels  Mining  Potable  Water  Facilities  Sewage  Treatment  and  Transport �Hydro  Electric  Facilities    Seaports  and  Seaways    Swimming  Pools  Ponds  and  Waterfalls    National  Defense  Applications    Storm  Water  Canals �

Manufacturer:�ZHONGHE  WATERPROOF  MATERIAL  CO.  LTD.  China  International� Distributor:�Kelso� Coatings�

405 Industrial Drive, Unit #14, Milton, ON L9T 5B1

Telephone: 1-905-281-3921 Toll Free: 1--866-544-0450 (Within North America)Fax: 1--905-864-7389 E---mail: info@kelsocoatings.com Website: www.kelsocoatings.com

Product Data Sheet

Edition 4.2008

CN2000®B (CCCW)

CN

2000

®B

C

emen

titi

ous

Cap

illar

y C

ryst

allin

e W

ater

proo

fing

ISO 9001 – 2015 GB/T 19001 – 2000 Certified

CN2000®B  PRODUCT  DATA  SHEET    

 

Kelso  Coatings,  a  division  of  Kelso  Industrial  Group.    Formerly  Revolutionary  Concrete  Solutions  Inc.          2  

Advantages:�All   technical   performances   of   CN2000®B   achieve   or   exceed   national   and   industrial  standards.    

CN2000®B  is  water-­‐soluble.  Application  is  executed  at  normal  temperatures.  Use  is   convenient.   It   can   be   applied   to   all   kinds   of   aboveground   and   underground  projects.     Coating   varies  with   the   shape   of   the   concrete   substrate   surface  without   joints.  CN2000®B  can  be  applied  by  trowel,  brush  coating  or  spray  coating.   CN2000®B  has  the  capability  of  self-­‐healing.     CN2000®B  is  non-­‐toxic,  odorless  and  flavorless;  it’s  safe  to  the  human  body  and  is  non-­‐polluting  to  the  environment.     CN2000®B  is  an  Environmentally� Friendly� Product.   CN2000®B  increases  concretes’  compressive  and  bending  strength  and  has  a  high  impervious  pressure.     CN2000®B   has   superior   resistance   to   the   effects   of   extreme   temperature  variations  and  is  resistant  to  ultraviolet  radiation,  oxidation,  and  carbonation.     The  CN2000®B  coating  is  thin  and  the  application  procedure  is  simple  and  quick.  The  next  construction  procedure  can  be  initiated  after  24  hours  of  curing.     CN2000®B  freeze-­‐thaw  resistance  and  anticorrosion  ability  are  superior.     CN2000®B  can  be  utilized   in  any  project  exposed  to  water,  seawater  and/or  soil  with  high  salinity.  

Packaging� &� Storage:� � � � � � 25kg  Sealed  Plastic  Pail.  

� When   stored   in   a   dry   place   between   -­‐30℃   to   40℃,   in   the   original   packaging  unopened  and  undamaged,  the  shelf  life  of  CN2000®B  is  2  years.    

How� to� Use�Coverage� Area:        

25kg  of  CN2000®B� will  fully  cover  approximately  25m2,  2  coats.    In  general:  1  -­‐  2kg/m2  (thickness:  about  1  -­‐  2  mm).    In  special  cases,  as  determined  by  specific  engineering  requirements  -­‐  refer  to  the  product  instruction  manual.  

Remarks:     Proper  application  requires  2  or  3  coats.  (For  proper  coverage  –  1st  pass  <–>  left  to  right  then,  2nd  pass  from  top  to  bottom)  Two  coatings  at  approx.  0.5kg  -­‐  1.0kg/m2  each  Three  coatings  at  0.33kg  -­‐  0.67  kg/m2,  each  

Note:     Spray  coating  is  the  most  economical  coating  method.  �Surface� Preparation:� ��

Allow  at  least  7  days  or  more  curing  of  the  concrete  of  last  pour  before  coating.     The  substrate   surface  must  be   solid  and  clean.  Seepage,  dust,  oil   stains  and  any  dirt  should  be  cleared  and  removed.     If  the  substrate  surface  has  been  smoothed  by  rolling,  it  should  be  roughened.    

CN

2000

®B

C

emen

titi

ous

Cap

illar

y C

ryst

allin

e W

ater

proo

fing

CN2000®B  PRODUCT  DATA  SHEET  

Kelso  Coatings,  a  division  of  Kelso  Industrial  Group.    Formerly  Revolutionary  Concrete  Solutions  Inc.    3  

The  loose  honeycomb-­‐type  concretes,  hollows,  joint  seams  and  holes  left  over  by  pull  rods  and  scaffolds  must  be  eliminated  beforehand  and  filled  with  CN2000®B�MORTAR,  in  order  to  obtain  the  best  application  surface.    The  substrate  surface  must  be  well  saturated  with  water,  without  puddles.  

of  the � CN2000®B.  

Direct  sunlight,  rain  or  frost  should  be  avoided  during  the  curing  process.  �For� a� reservoir, � water� can� be� stored� only� after� the� coating� has� cured� for� at� least�7� days.� ��

Mixing:                      Materials’  ratio  (by  weight):  Trowel  coating:    CN2000®B:  water  =  1:  0.35  ±  0.05  Brush  coating:     CN2000®B:  water  =  1:  0.4  ±  0.05  Spray  coating:   CN2000®B:  water  =  1:  0.5  ±  0.05  

Mix  CN2000®B  with  water.   (Water  must  be   in  mixing  container   first)  Mix  only  as  much  material   as   can   be   used   up  within   20   to   30  minutes   and   stir   the  mixture  evenly,  leaving  no  visible  powders.  The  stirring  time  generally  is  3  to  5  minutes  by  mechanical  means.  (i.e.  electric  drill  with  paddle)  Once   the  CN2000®B  mixture   is   completed,   you  must   not   add  water   to   thin   the  remaining  mixture  for  reuse.  It  must  be  disposed  of.  

Applying:��Trowel� coating:  Using  a  trowel  or  squeegee,  apply  evenly  mixed  CN2000®B  to  the  working  surface.   First   apply   into   the   corners,   sides   and   shaped   areas.   Then   apply   on   the   level  surfaces.   Each   coating   should   be   applied   consistently   and   in   one   direction.   Successive   coatings  should  be  applied  perpendicular  to  the   last  coat.  The  thickness  of   joining   layers  should  be  even.  Allow  preceding  coating  to  set  (Not  sticky  to  the  touch)  before  applying  the  next  coating.  Apply  2  to  3  coatings  to  reach  the  total  required  thickness.    

Brush� coating:  Except  for  the  materials  ratio  (weight),  the  procedures  are  the  same  as  with  trowel  coating.  

 Spray� coating:  Except   for   the  materials   ratio  and  using  special   spray  equipment,   the  procedures  

are  the  same  as  with  trowel  coating.  

Curing:                          After  the  final  coating  has  been  applied,  and  when   it   is  no   longer  sticky  to  the  

touch,  but  its  color  has  not  changed  to  white,  immediately  cover  the  surface  with  a  plastic  film  or  intermittently  sprinkle  the  surface  

CN

2000

®B

C

emen

titi

ous

Cap

illar

y C

ryst

allin

e W

ater

proo

fing

CN2000®B  PRODUCT  DATA  SHEET  

Kelso  Coatings,  a  division  of  Kelso  Industrial  Group.    Formerly  Revolutionary  Concrete  Solutions  Inc.    4  

 with   water   to   keep   the   surface   damp   for   24   hours   to   allow   for   proper   curing.   A   coating   of  CN2000®C� D� can  be  applied  over  the  CN2000®B  to  allow  for  curing  in  areas  of  uncontrolled  water.  The  CN2000®C� D� function  in  this  instance  is  to  maintain  proper  hydration  to  allow  curing  �Typical� Data�

Aggregate  state:   Powder  Color:   Off-­‐white  Specific  Gravity:  Approx.  1.3  

Precautions:� �The   best   temperature   for   application   is   20℃   ±   10℃.   Avoid   application  under  5℃  or  above  35℃,  or  in  hot,  dry  environments.    Do  not  apply  CN2000®B  at  or  below  freezing  temperatures.    The  waterproof  coating  must  be  cured  for  24  hrs  before  the  next  process  to  avoid  destroying  the  coating.    If   vehicles  and   pedestrians   pass   over   the  waterproof   coating,   protective  covers  are  required.  (Pavement,  tiling  etc.)  CN2000®B   is   a   coating   material.   It   can’t   be   used   as   an   admixture   to  concrete  or  plaster.    

First�� Aid:�CN2000®B   is   cementitious.   Avoid   contact  with   skin   and   eyes.   In   case   of  contact  with  eyes  or  skin,  rinse  immediately  with  plenty  of  water  and  seek  medical  advice  if  necessary.    Workers  should  wear  masks,  goggles  and  gloves  while  mixing  and  stirring  the  product.    Keep� out� of� reach� of� children.� �

Disposal:� �CN2000®B   is  cementitious  and  should  be  disposed  of  as  required  by  Federal,  State,  Provincial  and  Municipal  laws  and  By-­‐Laws. �CN2000®B  is  an  Environmentally� Friendly� Product.  

Warranty:            ZHONGHE� Waterproof� Material� Co.,� Ltd.   warrants   that   the   products  manufactured   by   it   comply   with   the   national   standard   GB18445� 2001�Cementitious� Capillary� Crystalline� Waterproofing� Materials,   shall   be   free   from  material   defects   and   will   conform   to   formulation   standards   and   contain   all  components  in  their  proper  proportion.    

Should   any   of   the   products   be   proven   defective,   the   liability   to   ZHONGHE�Waterproof� Material� Co.,� Ltd.   shall   be   limited   to   replacement   of   the   material  proven  to  be  defective.    ZHONGHE� Waterproof� Material� Co.,� Ltd.  shall  in  no  case  be  liable  for  incidental  or  consequential  damages.    

If  problems  are  caused  due  to  violation  of  the  use  regulations,  ZHONGHE� Waterproof� Material�Co.,� Ltd.  will  not  be  responsible.  

CN

2000

®B

C

emen

titi

ous

Cap

illar

y C

ryst

allin

e W

ater

proo

fing