NEW THROUGH CUT CHANNEL PER MODEL

NEW DATALINK BARCODE SYSTEM

NEW USB THUMB DRIVE SUPPORT FOR OFFLINE CUTTING

GRAPHTECAMERICA.COM

NEW INCREASED PRODUCTION SPEED

NEW XY SEGMENT AREA COMPENSATION

NEW BUILT-IN CONVENIENT TOOL STORAGE

CE7000-6024”

CE7000-4015”

CE7000-13050”

PRECISION CUTTING SOLUTIONS

CE7000 SERIESALL NEW

OPTIONAL BASKET CE7000-60 & -130

CARRIER SHEET TABLE CE7000-40 & -60

CE7000-130

50” × 164’50” x 79”(50” x 16.5’)

54”38 lbs (17kg)4 rollers (Max. 5 (option))39” per second at 45° directionMax. 45.6’ per second at 45° direction

Approx. 67” x 32” x 48”(67” x 45.2” x 48”) (*3)

112.4 lbs (51 kg)121 lbs (54.9 kg) (*3)

ItemConfigurationDrive methodMax cutting area (W x L) (*1)Cutting area of guaranteed accuracy (*1)(When using optional basket)Mountable media width Min. Max. Mountable roll media massNumber of push rollersMax. cutting speedAccelerationCutting forceMinimum character sizeMechanical resolutionProgrammable resolutionRepeatability (*1)Mountable number of toolsBlade typesPen typesMedia typesInterfaceBuffer memoryCommand setsDisplayPower sourcePower consumptionOperating environmentGuaranteed accuracy environmentExternal dimensions (W x D x H) (With basket)Weight (approx.)(With basket)Compatible OS (*4)

Supported software (*5)SafetyEMC

CE7000-40Grit rolling typeDigital Servo Drive15” × 164’14” × 79”

2”19”11 lbs (5kg)2 rollers24” per second at all directionMax. 69.6’ per second at 45° directionMax. 4.41N (450gf)Approx. 5 mm (0.016”) alphanumeric (varies depending on character font and media)0.005 mmGP-GL: 0.1/0.05/0.025/0.01 mm HP-GLTM (*2): 0.025 mmMax. 0.1 mm in plot up to 2 m (Excluding media expansion and contraction)1 toolSupersteelOil-based ballpoint pen, Water-based fiber-tip penUp to 25 mil (.63 mm) cutting Graphtec Rhinestone Stencil material GRS 1510 Marking film (PVC film / fluorescence / reflective), Polyester film (under certain conditions)USB 2.0(Full Speed), Ethernet 10BASE-T/100BASE-TX2MBGP-GL / HP-GL™ (Set by command or auto-detect) (*2)

Graphic type LCD with back-light (240dots x 128dots), supports 10 languages100V to 120V AC, 200V to 240V AC, 50/60 HzUpt to 100W10 to 35°C, 35 to 75% R.H. (non-condensing)16 to 32°C, 35 to 70% R.H. (non-condensing)Approx. 30.4” x 11.5” x 12.3”

28.7 lbs (13 kg)

Windows 10/8.1/7Mac OS X 10.6 ~ 10.11 / macOS 10.12 ~ 10.15 (Graphtec Studio: 10.6 - 10.15, Cutting Master 4: 10.7 - 10.15)Graphtec Pro Studio(Windows)(*6), Graphtec Studio(Mac), Cutting Master 4(*6), Windows DriverPSE, UL/cUL, CE markVCCI Class A, FCC Class A, CE mark

CE7000-60

24” × 164’23” x 79”(23” x 16.5’)

28”20 lbs (9kg)

35” per second at 45° direction

Approx. 39.6” x 23” x 43”(39.6” x 36.9” x 43”) (*3)

51 lbs (23 kg)55.6 lbs (25.2 kg) (*3)

SPECIFICATIONS

Basket for CE7000 series

Carrier sheet tableGraphtec Pro Studio PlusGraphtec Pro Studio Plus for RhinestoneGraphtec Pro Studio Plus for Auto Nesting

PG0103PG0104OPH-A45OPS682-PLSOPS682-RSFOPS682-ANF

For CE7000-60For CE7000-130For CE7000-40 or CE7000-60Design software including all advanced functions (1 license)Limited edition of rhinestone function only (1 license)Limited edition of auto nesting function only (1 license)

OPTION

ItemCutting blade holder

Cutting blade

LoupeFiber-tip pen holderWater-based fiber-tip pen

Ballpoint pen holderOil-based ballpoint penCarrier SheetCutting mat

SUPPLIESPart No.PHP33-CB09N-HSPHP33-CB15N-HSCB09-PCB09UB-5CB09UB-K60-5CB15U-5CB15U-K30-5PM-CT-001PHP31-FIBERKF700-BKKF700-RDPHP34-BALLKB700-BKCR09300-A3PM-CR-009PM-CR-010PM-CR-011

DescriptionFor CB09U series bladeFor CB15U series blade0.9mm dia. 45º angle, Supersteel0.9mm dia. 45º angle, Supersteel0.9mm dia. 60º angle, for Car Film1.5mm dia. 45º angle, for paper/cardboard1.5mm dia. 30º angle, for paper/cardboardChecking blade length, for PHP33 and PHP35 seriesPen holder for KF700 series penPen (black)Pen (red)Pen holder for KB700 penPen (black)11.69” x 16.53” A3 sizeFor CE7000-40 replacement cutting matFor CE7000-60 replacement cutting matFor CE7000-130 replacement cutting mat

Package1 set per pack1 set per pack5 blades/pack5 blades/pack5 blades/pack5 blades/pack5 blades/pack1 set per pack1 set per pack10 pens/pack10 pens/pack1 set per pack10 pens/pack2 sheets/pack2 sets per pack2 sets per pack2 sets per pack

ItemPower cordUSB cableCutting blade holderCutting BladeLoupeFiber-tip pen holderWater-based Fiber-tip penRoll Media TrayStand for CE7000DVD-ROM

Printed Document

Qty1111111111

1

DescriptionThe type of cord is different by destination2.9 meters longPHP33-CB09N-HSCB09UB-1PPM-CT-001PHP31-FIBERKF700-BK (black)Only for CE7000-40Standard accessory for -60 / -130User manual, Windows driver,Graphtec Pro Studio (Windows, 1 license),Graphtec Studio (Mac), Cutting Master4Setup Manual, Cutter Blade Manual, and Safety Manual

STANDARD ACCESSORIES

*1 Operated with Graphtec-specified cutting conditions and media. For long-length cutting, the basket is used.

*2 HP-GLTM is a registered trademark of Hewlett-Packard Company. *3 When equipped with the stand.*4 Graphtec does not support software/driver used with operating systems that have become

obsolete and are no longer supported by the OS developer.*5 The software is available for download from Graphtec’s website.*6 It requires an Internet connection in order for activation or registration when starting the software for the first time.

• Brand names and product names listed in this brochure are the trademarks or registered trademarks of their respective owners.• Items mentioned are subject to change without notice. For more information about product, please check the web site or contact your local representative.

17462 Armstrong Ave. Irvine, CA 92614 | Tel: 800-854-8385 | Fax: 949-855-0895 | graphtecamerica.com

Item Part No. Description

Important Safety Instructions Before using, please read the user manual and use it properly in accordance with the description.To avoid malfunction or electric shock, please ensure ground connection and use with specified power source.