6mm diameter shafts, 0.5” long minimum. Non-threaded bushing.Resistance Taper Other desc CAT#10K Audio Dual element APD-10K20K Linear Single element LP-20K100K Audio Dual element APD-100K

All pots above are 4 pcs of one CAT# for $1.00100 pcs of one CAT# $15.00 (no mixing)

PC MOUNT POTS

10K X 2 AUDIO TAPER 1/8" diameter half-moon shaft. 7mm threaded bushing. PC mount.CAT# APT-10KD $1.00 each

POTENTIOMETERS

All of the following pots have 1/4" dia. shafts and3/8" dia. (3/8-32) or 7mm threaded bushings, unless otherwise specified. Shafts may be full-round, half-round or knurled.

VISIT OUR WEBSITE - WWW.AllElECTRONICS.COM

LINEAR POTS WITH 1/4” DIA. SHAFT

50K AUDIO TAPER POT6mm split knurled shaft, 10mm long. 7mm threaded bushing.CAT# PTT-50K 85¢ 60¢ each

50K LINEAR TAPER POT W/ ON-OFF SWITCH Alpha #B50K with switch. 6mm diameter split knurled shaft. 7mm threaded bushing. S.P.S.T. switch is off at full counter-clock-wise direction. CAT# PTL-50K $1.00 85¢ each

10K LINEAR PRECISION POTTokos / Cosmos# RV Q24YN 15F B 103 High-quality, 10K Ohm, 1/4W carbon film potentiometer designed for long-life. Very smooth, precise rotation, designed for 500,000 cycles. 6mm dia. x 5mm long flatted shaft. 9mm threadedbushing. 24mm dia. body. Solder-lug terminals. CAT# LPT-10K $2.00 each 10 for $1.75 each • 100 for $1.60 each

PRECISION POTS WITH 1/4” DIA. SHAFT, USED

All of the following pots have 1/4" dia. shafts and 3/8" dia. (3/8-32) threaded bushings. Removed from equipment. May have short wires soldered to terminals.

Spectrol/ Vishay Model 157. 1-piece aluminum housing. Ceramic sealed back. 1 Watt power rating. 10K Ohm linear taper. Conductive plastic element. Flatted stainless steel shaft. Removed from equipment with short wires soldered to turret terminals. May have writing or test marks. CAT# PPT-10KLU $1.50 ea. • 10 for $1.35 ea.

Spectrol Model 533. Precision 3-turn wirewound potentiometer. 2K Ohms linear taper. 1 Watt power rating. Flatted shaft. 22mm dia. x 19mm long body. Includes nut and washer.CAT# PP-2KU $1.50 each

Spectrol Model 138. High-quality 10K Ohm linear taper potentiometer. 2W power rating. Conductive plastic element. Molded, glass-filled thermo-plastic housing, 33mm (1.3") dia. body. Half-moon shaft is 0.5" long. CAT# POP-10KLU $2.00 each 10 for $1.80 each

DUAL 100K LINEAR6mm diameter shaft. 7mm diameter bushing.CAT# PTD-100K 75¢ each

POT W/ 6MM DIA. SHAFTDual 10K audio taper. 6mm flatted shaft. 7mm threaded bushing.CAT# DPA-10K $1.00 65¢ each

10K BOURNS POT, PRE-WIREDBourns 82A1AC28BA0728. 2W, single-turn cermet. New pot, prepped with three 6" wire leads.CAT# PTW-10K $2.75 each

62

10 OHM 5W WIREWOUND POTCTS #026TA20R100B1A3. Solder-lugs.CAT# PT-10 $2.50 each 100 for $2.25 each

20K LINEAR POT20K linear pot with 6mm x 10mm long slotted knurled shaft and 7mm threaded bushing. PC mount.CAT# TPL-20K 75¢ each10 for 65¢ each

NEW

POTS WITH 6MM DIA. SHAFT

LINEAR TAPER POTS6mm x 10mm long slotted knurled shaft and 7mm threaded bushing. Solder lugs. Available values 500 OHM, 1K, 2K, 5K, 10K, 20K, 50K, 100K, 200K, 500K, 1M, 1.5M and 2M.CAT# NLTP-XX (no mixing values)XX=value in ohms, i.e. NLTP-200K75¢ each • 10 for 65¢ each

REDUCED

REDUCED

REDUCED

15 MEG Solder-lugs.CAT# LTP-15M75¢ each

AUDIO TAPER POTS6mm dia. knurled shaft. 7mm threaded bushing. Solder terminals. Available values 1K, 5K, 10K, 25K, 50K, 100K, 200K, 500K and 1M.CAT# NATP-XX (no mixing values)XX=value in ohms, i.e. NATP-200K2 for $1.50 • 10 for 65¢ each

ORDER TOLL FREE 1-800-826-5432

1K VERTICAL ADJUST Piher #PT10LV0 1K 20%. 10mm diameter cermet trimmer. Outer PC pins on 5mm centers. CAT# TPR-1K 5 for $1.00 • 100 for 15¢ ea.

10K ALLEN BRADLEY TRIMMERAllen Bradley Type E. 10K Ω, single-turn trimmer potentiometer. 10mm square. PC leads in triangular pattern, 5mm centers w/ wiper lead in middle.CAT# TRP-10K 2 for $1.00

SINGLE TURN TRIMMERS

1K OHM MULTITURN TRIMMER Vishay T93YB 1K 10% multiturn trimmer. 10 x 10 x 5mm. Triangle lead pattern, outer legs on 5mm centers.CAT# MTP-1K $1.25 each

MULTITURN TRIMMER POT Precision 20-turn trim pot. 3/8" square, top-adjust. Leads in straight row on 0.10" centers. Available values: 500, 50K, 1MEGCAT# MTPS-XXX $1.25 eachXXX=value in ohms, ie MTPS-1MEG

RECTANGULAR TRIMMER0.75" X 0.19" high. 3/4 watt. Comparable to Bourns 3006P, Beckman 89PR, Weston 830P, AB 94P. Available values: 2K, 2.2K, 5K, 10K, 100K, 500KCAT# RTP-XXX $1.25 eachXXX=value in ohms, ie RTP-2.2K

PRECISION MULTI-TURN TRIMMERS

SLIDE POTS

SLIDE POTS, 65MM TRAVELSlide potentiometers with mounting holes on 80mm centers. Slide travel, 65mm. Overall length, 88mm. Metal sliders, 1.2mm thick x3.5-4mm at tip. Single-element if not otherwisenoted. “C-detent” indicates a center-detent, a tactile bump in the center of slide travel.Res. Taper Desc CAT# Price 10+20K Linear C-detent SLP-20KS $1.00 80¢50K Linear 2-ele.,C-det. SLP-50K $1.00 80¢50K Linear C-detent SLP-50KS $1.00 80¢100K Audio 4-element SLP-100K4A $1.00 80¢

MULTITURN TRIMMERS1/4W cermet trimmers. 6 x 7 x 4mm. Triangle pc pin pattern.

CAT# EACHTop Adjust 500 Ω TPR-500 $1.25 Top Adjust 10K TPR-10K $1.25Side Adjust 250K TPS-250K $1.25Side Adjust 1M TPS-1M $1.25

20K LINEAR SLIDE POTBourns # SSHA20B20300. Low-profile, unenclosed slide pot. 0.85" travel. Four pc leads on 1.17" x 0.33" centers. CAT# SP-20K 2 for $1.00

TOP ADJUST 3/8" square x 3/16" high. 1/2 watt. Comparable to Bourns 3386P, Beckman 72PR and Spectrol 63P. Ohms CAT# each 10500 STP-500 50¢ 40¢20K STP-20K 50¢ 40¢50K STP-50K 50¢ 40¢

5K AUDIO MINI-SLIDE POTBody dimensions, 30 x 8 x 7mm high. Tapped mounting holes on 26mm centers. Slide travel, 17mm. PC terminals. CAT# SP-5KA 2 for $1.00

20K DUAL SLIDE POT Two-element 20K audio slide pot with brushed aluminum face plate and rubberized, soft-touch knob. Smooth, even feel. 2.37” travel. Pot is prepped with a 5-pin connector (0.1” spacing). Metal face plate is 3.47” x 1.27” with recessed mounting holes in corners. Pot and connector extend 0.57” below face plate.CAT# SLP-20KAX2B $4.25 each10 for $4.00 each

63

1 MEG Ω THUMBWHEEL TRIM POT 0.7" dia., old-style trim pot. PC leads on 0.4" centers. Center wiper terminal is on opposite side from other leads.CAT# TPT-1M 10 for $1.00 100 for 6.5¢ each • 500 for 4¢ each

SINGLE TURN TRIMMER POTS7mm square trimmer. Two leads are on 5mm centers. Middle (wiper) lead is 5mm from the center of the other leads. Available values: 500, 5K, 10K, 20K, 50K, 100K, 150K, 500K CAT# TPS-XXX (no mixing values)XXX=value in ohms, ie TPS-10K4 for $1.00 • 100 for 18¢ each

32 Ω WIRE-WOUND TRIMMER 20mm dia. Screwdriver adjust. Two mounting ears with holes on 1" centers.CAT# TPW-32 50¢ each

NEW

PRO X FADE CROSS FADEREclectic Breaks (EB) 50K Ohm Linear x 2. The Pro X Fade is an advanced analog cross fader. A high quality retro-fit alternative to existing cross faders fitted in retail mixers. Users can physically change the feel of the fader to suit their own needs, by using adjustable cut-in rotaries and tension torquecontrol. Easy access for lubricating and cleaning.CAT# SLP-50KL $5.00 each

NEW

15 watt 8 ohm mono L-Pad for level adjustment. For installation in speaker cabinets. Includes 2" dia. plate, mounting nuts and a black plastic knob. 3/8" panel hole. Note: The knobs do not quite fit. We recommendboring the hole slightly to facilitate a better fit.CAT# 8MLP $4.50 each

8 OHM L-PAD, MONO 15W