Outdoor MMDS TransmitterUnique Broadband Systems Ltd.

The transmitter is housed in a corrosion resistant, weather-proof NEMA-style cabinet for outdoor pole mounting and it is designed with maximum reliability and versatility in mind. The hinged front panel provides easy access to internally mounted components for control and maintenance.

The temperature inside the enclosure is thermostatically con-trolled. The outdoor MMDS transmitters are available in two AC power options: 220V – 50 Hz and 115V – 60 Hz.

Extended bandwidth and alternate frequency configurations are available. UBS can also supply monitoring software, control software, and hardware packages, all customized to meet spe-cific requirements.

The 50 Watt and 100 Watt outdoor broadband transmitters are intended for use in Multi-Channel Multi-Point Distribution Sys-tem (MMDS). They are capable of transmitting between one and thirty-one 6 MHz analog or digital channels in the 2.5 GHz to 2.7 GHz frequency range.

These broadband transmitters can provide cost-effective, omni-directional or sectorized coverage for small to medium size markets. The transmitters are compatible with all current modulation schemes and are transparent to all popular encod-ing systems. The transmitted signals can be received using standard customer premises downconverter and decoding equipment.

The transmitters feature RF muting when the input IF signal is below the preset threshold. Thermal shutdown and overpower shutdown are automatic protection features incorporated in the Transmitter. The transmitter parameters can be controlled directly or remotely through an external monitoring unit.

Product Description

Product Features

•Weatherproofoutdoorthermostaticallycontrolleddesign

•Full2500MHzto2700MHzcapability

•Automaticoutputlevelcontrol

•222MHzto422MHzIFinput

•Localoroptionalremotemonitoringandcontrol

•Compatiblewithallcurrentanaloganddigitalmodulationschemes

•Optionaltransmitterredundancyconfigurations

Models: PmP-Tx-50-2527-O-B-1PmP-Tx-50-2527-O-B-2

PmP-Tx-100-2527-O-B-1PmP-Tx-100-2527-O-B-2

VER 1.3 August 24, 2009

Wireless Broadband and Broadcasting Solutions

Outdoor MMDS TransmitterModels: PmP-Tx-50-2527-O-B-1 PmP-Tx-100-2527-O-B-1 PmP-Tx-50-2527-O-B-2 PmP-Tx-100-2527-O-B-2 Unique Broadband Systems Ltd.

Product Specifications (specifications are subject to change without notice)

Parameters Tx-50 / Tx-100Output Power at 1 dB Gain Compres-sion Point, single CW tone

50 Watts / 100 Watts

Output Frequency 2.5 GHz - 2.7 GHz

IF Input Level, ALC on -20 dBm to -10 dBm

IF Input Frequency 222 MHz - 422 MHz

Frequency Stability ≤ ±500 Hz

SSB Phase Noise ≤ -110 dBc/ Hz @ 10 kHz offset

In-band Spurious Products ≤ -60 dBc

Harmonics ≤ -60 dBc

Hum and Noise ≤ -60 dBc

Group Delay ≤ ±10 ns

Analog PerformancePeak Sync Output Power, single channel

25 Watts / 50 Watts

Composite RF Output Power, CTB –55 dBc

2.5 Watts / 5 Watts

Signal to Noise Ratio, in 6 MHz chan-nel

> 70 dB

Gain Flatness, in 200 MHz ±0.5 dB

Noise Figure ≤ 10 dB

Digital PerformanceDigital Average Output Power 5 Watts / 10 Watts

Spectral Regrowth at channel edge < -40 dB

Frequency Response, in 6 MHz chan-nel

≤ ±0.2 dB

RF Output Power stability, ALC on ≤ ±0.3 dB

Modulation Mode QPSK, 64/256 QAM, COFDM, AM, FM

Digital ModulationError Vector Magnitude (EVM) ≤ 2%

Signal to Noise ≥ 40 dB

Magnitude Linearity (AM-AM conver-sion)

≤ ±0.125 dB

Phase Linearity (AM-PM conversion) ≤ ±0.75°

ConnectorsIF Input Connector F-type (female), 75 ohm

IF Monitoring Connector F-type (female), 75 ohmLevel: Typ. 25 dB below the IF input level

RF Output Connector N-type (female), 50 ohm

RF Monitoring Connector N-type (female), 50 ohmLevel: Typ. 40 dB below the RF output level

Monitor Connector(optional) 26 pin connector, for optional indoor unit

VER 1.3 August 24, 2009

Wireless Broadband and Broadcasting Solutions

Power SupplyVoltage 115 VAC or 220 VAC

Frequency 60 Hz or 50 Hz

Power Consumption 500 VA / 800 VA

MechanicalDimensions 660 x 510 x 280 mm

(26” x 20” x 11”)

EnvironmentalOperating Temperature -40°C to +40°C (-40°F to +104°F)

Relative Humidity 100%

Cooling Natural convection

Wireless Broadband and Broadcasting Solutions

Unique Broadband Systems Ltd.

Part Number Configuration

DPA

BandYL – L-BandYS – S-BandYC – C-BandYX – X-BandKU – Ku-BandKA – Ka-Band

Output PowerL-Band

0250W,0500WS-Band

0150W, 0300WC-Band

0010W, 0020W,0040W,0080W,0100W,0150W,0200W,0250W,0300W,0325W,0400W,0650W,0800W

X-Band0275W, 0550W

Ku-Band0060W,0080W,0100W,0150W,0200W,0300W,0400W,0800W,

Ka-BandTWTA, UP TO

1.5KWAVAILABLE

PLEASE CALLFOR INQUIRY

FOR HIGHPOWER 1KWAND ABOVE

PLEASECONTACT OUR

SALESDEPARTMENT

Sub Band

L-BandA (1.0-2.0 GHz)B (1.5-3.0 GHz)C (1.0- 2.5 GHz)

S-BandA (2.02-2.12 GHz)B (2.20-2.30 GHz)

C-BandA (5.850-6.425 GHz)B (5.750-6.475 GHz)C (5.750-6.670 GHz)D (5.850-6.725 GHz)E (6.425-6.725 GHz)F (6.725-7.025 GHz)

X-BandA (7.70-8.40 GHz)B (7.90-8.40 GHz)C (7.50-8.50 GHz)

D (9.50-10.50 GHz)Ku-Band

A (14.00-14.50 GHz)B (13.75-14.50 GHz)C (12.75-13.25 GHz)D (13.00-14.50 GHz)E (13.25-13.75 GHz)

Ka-BandA (27.5-31.0 GHz)

EnclosureI - IndoorO - Outdoor

Block Up ConverterB - BUCX – Not Available

Configuration/Options

STD – Standard

ISP – Input Sample Port

WGF* – 90° Output W/G Flange

WSP *– 90° Output W/G Flange with Input Sample Port

FPS** – Front Panel Power Switch

RPM – Reflected Power Monitor

FRM** – Front Panel Power Switch and Reflected Power Monitor

EPS – External, Redundant Power Supply, 1RU N+1

EPE – External Power Supply, 1RU N+1 and Rear Panel

* Available in all but S-Band-and L-Bands** Not Available with External 1RU N+1

Redundant Power Supply