ntt communications cloudⁿ object storage...
TRANSCRIPT
1
NTT Communications
Cloudⁿ
Object Storage
Operation Manual
Ver11
Do not redistribute (distribute reproduce or provide) the content listed
in this document
2
Versio
n
Edited
date
Description of modification
Ver10 February 20
2013
A new version (separated from the Cloudⁿ Storage User
Guide)
Ver11 March 23
2012
Cooperation with Cloudⁿ portal was added
3
1 Introduction P4 - 1) Overview of service
2) Preparation in advance
2 Operate the Storage Console P6- 1) Start using the Storage service
2) Start the Storage console
3) Terminate the Storage console
Contents
3 Manage the Bucket Object P13- 1) Create the bucket
2) Delete the bucket
3) Upload the object (file)
4) Delete the object
5) Publish the bucket and object
4 Manage the Account
P22- 1) Set the account profile
2) Confirm API key
5 Manage the User P24- 1) Search a user
6 Confirm the Report P25- 1) Display the usage report
Object Storage is the service to work with other Cloudn services to make the available storage
object-oriented and enable control from API or control panel
This service allows you to introduce the inexpensive storage service with fewer limitations for
Cloudⁿ account
Storage location
of object
in Japan DC
Storage location
of object
in USA DC
Customer
(Domestic site)
Customer
(Overseas site)
Cloudn
Virtual Server
Service
(Japan DC)
Cloudn
Virtual Server
Service
(USA DC)
Object Storage
Cloud(N) control panel
(Japan Data Center)
Cloud(N) control panel
(USA Data Center)
Japan Data Center
Features of Object Storage are shown below
Excellent cost performance to store a large volume of data
High robustness of 99999999999 (11-nine)
You can use it without concerning upper limit of capacity
In addition to the control panel it can be operated from API (compatible with S3
REST API)
1-1) Overview of service
Guide for Cloudⁿ
Prepare the Guide for 【Cloudⁿ】 sent when you submitted a new application of Cloudⁿ
Software to browse the control panel (browser software)
Firefox1801 or later is recommended
Note that a part may be not shown in other browser
Service to connect to Internet
Prepare the service to connect to Internet
Example Constant connection services such as OCN dial access service OCN ADSL connection service and Super OCN
You can use other company Internet connection service
If you are using a proxy server in your company confirm that https (port No 443) is open
Prepare the followings before using Object Storage
5
This section describes the client PC used at this Object Storage setup
1-2) Preparation in advance
6
In order to start using the Storage service start using it from the Cloudn portal or control
panel (only in West JapanUSA)
2-1) Start using the Storage service
Log in the Cloudⁿ portal and click [Start using] displayed by mouseover to [Sign Up
Now ] icon in the region used
2 A pop-up screen showing the service is starting appears Then the Object Storage
console screen appears
Click
1
Login method 1 【Start using from Cloudⁿ portal】
7
Login method 2 【Start using from control panel (only in West JapanUSA)】
2-1) Start using the Storage service
Click the [Manage Users] tab in the control panel
Select the user who uses Object Storage and click
２
1
Click
Click
8
2-1) Start using the Storage service
５
3
After the Storage account is added log in the control panel with the appropriate user to
show the [Storage console] tab where you can move to the Storage console screen
The screen of adding Storage account completed pops up Click the [Close] button
Click [Submit] in order to make Object Storage available
４
Click
Click
9
In order to start the Storage console start it from the Cloudn portal or control panel (only in
West JapanUSA)
The Storage console starts on a new window
2-2) Start the Storage console
Log in the Cloudⁿ portal and click [Console] displayed by mouseover to [Object
Storage] icon which you start using in the region used
２
Click
1
Login method 1 【Start from Cloudⁿ portal】
10
The Storage console starts on a new window
2-2) Start the Storage console
２
Click the [Object Storage] button in the control panel
Click
1
Login method 2 【Start from control panel (only in West JapanUSA)】
11
The following operations are available on the Storage console
2-2) Start the Storage console
A user with the Domain User privilege created in West Japan and USA Data
Centers cannot display the [Management] and [Usage fee] tabs
[Management] tab () The following functions are available under this tab
- Manage the user
Enables to manage the user who uses Object Storage
[Explorer] tab The following functions are available under this tab
- Create and delete the bucket
Enables to create and delete the bucket on Object
Storage and set the access right
- Create and delete the object
Enables to create and delete the object for each bucket
and set the access right
[Account] tab The following functions are available under this tab
- Account profile
Enables to set the profile of account
- Security certificate
Enables to browse disable and delete the access key
and private key (secret key) required when using API and
create new keys
[Usage amount] tab () The following functions are available under this tab
- Usage amount report
Enables to make the list CSV and graph of current
usage amount of Object Storage (capacity transfer
amount number of requests etc) and browse the report
12
Close the Storage console
Click [Log out] on the upper right portion of the Storage console
After logout [Logout] is shown on the window and the screen is not closed
automatically Close the screen manually
2-3) Terminate the Storage console
1
Click
13
Create a new bucket
Enter the name of bucket which you want to create and then click [Create]
Click the [Data Explorer] tab from the Object Storage control panel
Confirm that the bucket created is shown in [Object and folder]
You must set the bucket name so that it is unique through system If you create
the bucket with the name used by other user an error is displayed
3-1) Create the bucket
1
Click
Click
２
3
14
Delete the bucket
Select the bucket which you want to delete from [Select a bucket] and click [Delete] to
delete it
You cannot delete the bucket if it has an object First delete the object in bucket
and then delete the bucket
When you click [Delete] it is immediately deleted Confirm carefully and then
delete it
3-2) Delete the bucket
Click the [Explorer] tab from the Object Storage control panel
1
２
Click
Click
15
Select the bucket for which you want to create an object When you want to create the
object in folder click the folder targeted in [Name]
In order to register the object one or more buckets are necessary
Upload the object (file) to the bucket
Click the [Explorer] tab from the Object Storage control panel
1
2
3-3) Upload the object (file)
Click
16
Select the file targeted from Reference and click [Upload the file]
Confirm that the object registered in [Name] is shown
The file size to upload the file from the Storage console is up to 2G due to
limitation of recommended browser FireFox If you desire to upload the file of more
than 2G use Object Storage API
3-3) Upload the object (file)
Click
3
3
In order to register the folder enter the folder name and click [Create the folder]
When uploading the HTML file it can work as a static contents server
17
Check the checkbox of object which you want to delete in [Select the bucket] and then click
[Delete]
The confirmation screen appears Click [OK] to complete deletion
Delete the object
3-4) Delete the object
Click the [Explorer] tab from the Object Storage control panel
1
Click
Click
２
3
Click
18
Perform the public setting of bucket and object The setting method is common to bucket and
object
When you want to publish the bucket select the target bucket in [Select the bucket] and
click [Access right]
When you want to publish the object check the checkbox of target object and click
[Access right]
When you add the user and group which can access to bucket or object click [Add]
Public and Storage_User listed in the first line mean below
- Public Published on Internet
- Storage_User Published to all customers who use Object Storage
3-5) Publish the bucket and object
Click the [Explorer] tab from the Object Storage control panel
1
２
３
Click
Click
Click
Click
19
When editing the public setting of usergroup edit the public setting by using the
checkbox of target user or group respectively By default all public settings are allowed
－Readable
Allows to read the bucket or object
－Writable (only for bucket)
Allows to write in the bucket
－ACP readable
Allows to read the access policy of bucket or object
－ACP writable
Allows to write in the access policy of bucket or object
When deleting the already existing usergroup check the checkbox of usergroup
which you want to delete and then click [Delete]
When you click [Delete] it is immediately deleted Confirm carefully and then
delete it
3-5) Publish the bucket and object
3
Click
4
If the public setting of bucket is different from object one object one is preferred
The published object is accessible at URL below
http[Bucket name]strcloudn-servicecom[(Folder name)Object name]
20
When setting the public URL for object click [Public URL access]
You cannot set the public URL for bucket
3-5) Publish the bucket and object
５
Set [Allow reading] [Issue the secure URL (https)] [Maximum number of downloading] and
[Expiration date] Set only [Allow reading] or both [Allow reading] and [Issue the secure URL
(https)] and click [Save] to generate the URL
－Allow reading
Allows the access from external to the object
－Issue the secure URL (https)
Allows the secure access from external to the object
－Maximum number of downloading
Sets the maximum number of downloading
－Expiration date
Sets the expiration date for access from external
6
Click
21
After editing all public settings click [Save] to terminate
3-5) Publish the bucket and object
７
Click
22
Set the account profile This setting is not mandatory
Enter the account profile information and click [Save]
ldquoAccount Profile was modified successfully appears on top of screen The setting of
account profile is completed
Click the [Account] tab from the Object Storage control panel
Click
4-1) Set the account profile
1
２
２
Click
23
Confirm the access key and private key (secret key) required when using API
Click the [Security Credentials] tab to display the access key ID If you want to display the
private key (Secret Key) click [View Secret Key] in the [Actions]
The private key (Secret Key) is displayed
Click the [Account] tab from the Object Storage control panel
xxxxxxxxx
xxxxxxxxx
4-2) Confirm the API key
1
2
３
Click Click
Click
24
Search a user
Click the [Admin] tab from the Object Storage control panel
Enter and select the conditions to search the user and click [Search]
The result is shown in [User List]
Click [View User Data] to display the bucket and object of user
5-1) Search a user
1
２
３
Click
Click
Click
25
Display the usage amount of Object Storage as a report
Click the [Usage] tab from the Object Storage control panel
Do not use (Current Billing Period) and (Previous Billing Period) in [Time Period]
6-1) Display the usage report
1
Click ２
Enter in [Operation] [Time Period] and [Report Granularity] of report displayed [Group ID] setting
and [User]
－Operation
Select the type of report to be displayed from downstream data transfer (Data Transfer-In-Bytes)
upstream data transfer (Data Transfer-In-Bytes) total capacity (Storage-Bytes) number of object
(Storage-Objects) number of all requests (All Requests) number of requests received (Get
Requests) number of requests sent (Put Requests) and number of requests deleted (Delete
Requests)
－Time Period
Select the period to be displayed from (Last week) (Last Month) and (Custom Period) When
selecting Custom Period set the period
－Report Granularity
Select the unit of report to be displayed from (Hours) (Days) (Months) and actual data (Raw)
－Group ID
Select the group ID in order to browse the report
－User
In order to browse a specific user enter the user name
26
Click [List] to display the result in the list format
You can download the same result in CSV format by clicking [Download CSV]
Click [Graph] to display the result in the graph format
6-1) Display the usage report
3
4
2
Versio
n
Edited
date
Description of modification
Ver10 February 20
2013
A new version (separated from the Cloudⁿ Storage User
Guide)
Ver11 March 23
2012
Cooperation with Cloudⁿ portal was added
3
1 Introduction P4 - 1) Overview of service
2) Preparation in advance
2 Operate the Storage Console P6- 1) Start using the Storage service
2) Start the Storage console
3) Terminate the Storage console
Contents
3 Manage the Bucket Object P13- 1) Create the bucket
2) Delete the bucket
3) Upload the object (file)
4) Delete the object
5) Publish the bucket and object
4 Manage the Account
P22- 1) Set the account profile
2) Confirm API key
5 Manage the User P24- 1) Search a user
6 Confirm the Report P25- 1) Display the usage report
Object Storage is the service to work with other Cloudn services to make the available storage
object-oriented and enable control from API or control panel
This service allows you to introduce the inexpensive storage service with fewer limitations for
Cloudⁿ account
Storage location
of object
in Japan DC
Storage location
of object
in USA DC
Customer
(Domestic site)
Customer
(Overseas site)
Cloudn
Virtual Server
Service
(Japan DC)
Cloudn
Virtual Server
Service
(USA DC)
Object Storage
Cloud(N) control panel
(Japan Data Center)
Cloud(N) control panel
(USA Data Center)
Japan Data Center
Features of Object Storage are shown below
Excellent cost performance to store a large volume of data
High robustness of 99999999999 (11-nine)
You can use it without concerning upper limit of capacity
In addition to the control panel it can be operated from API (compatible with S3
REST API)
1-1) Overview of service
Guide for Cloudⁿ
Prepare the Guide for 【Cloudⁿ】 sent when you submitted a new application of Cloudⁿ
Software to browse the control panel (browser software)
Firefox1801 or later is recommended
Note that a part may be not shown in other browser
Service to connect to Internet
Prepare the service to connect to Internet
Example Constant connection services such as OCN dial access service OCN ADSL connection service and Super OCN
You can use other company Internet connection service
If you are using a proxy server in your company confirm that https (port No 443) is open
Prepare the followings before using Object Storage
5
This section describes the client PC used at this Object Storage setup
1-2) Preparation in advance
6
In order to start using the Storage service start using it from the Cloudn portal or control
panel (only in West JapanUSA)
2-1) Start using the Storage service
Log in the Cloudⁿ portal and click [Start using] displayed by mouseover to [Sign Up
Now ] icon in the region used
2 A pop-up screen showing the service is starting appears Then the Object Storage
console screen appears
Click
1
Login method 1 【Start using from Cloudⁿ portal】
7
Login method 2 【Start using from control panel (only in West JapanUSA)】
2-1) Start using the Storage service
Click the [Manage Users] tab in the control panel
Select the user who uses Object Storage and click
２
1
Click
Click
8
2-1) Start using the Storage service
５
3
After the Storage account is added log in the control panel with the appropriate user to
show the [Storage console] tab where you can move to the Storage console screen
The screen of adding Storage account completed pops up Click the [Close] button
Click [Submit] in order to make Object Storage available
４
Click
Click
9
In order to start the Storage console start it from the Cloudn portal or control panel (only in
West JapanUSA)
The Storage console starts on a new window
2-2) Start the Storage console
Log in the Cloudⁿ portal and click [Console] displayed by mouseover to [Object
Storage] icon which you start using in the region used
２
Click
1
Login method 1 【Start from Cloudⁿ portal】
10
The Storage console starts on a new window
2-2) Start the Storage console
２
Click the [Object Storage] button in the control panel
Click
1
Login method 2 【Start from control panel (only in West JapanUSA)】
11
The following operations are available on the Storage console
2-2) Start the Storage console
A user with the Domain User privilege created in West Japan and USA Data
Centers cannot display the [Management] and [Usage fee] tabs
[Management] tab () The following functions are available under this tab
- Manage the user
Enables to manage the user who uses Object Storage
[Explorer] tab The following functions are available under this tab
- Create and delete the bucket
Enables to create and delete the bucket on Object
Storage and set the access right
- Create and delete the object
Enables to create and delete the object for each bucket
and set the access right
[Account] tab The following functions are available under this tab
- Account profile
Enables to set the profile of account
- Security certificate
Enables to browse disable and delete the access key
and private key (secret key) required when using API and
create new keys
[Usage amount] tab () The following functions are available under this tab
- Usage amount report
Enables to make the list CSV and graph of current
usage amount of Object Storage (capacity transfer
amount number of requests etc) and browse the report
12
Close the Storage console
Click [Log out] on the upper right portion of the Storage console
After logout [Logout] is shown on the window and the screen is not closed
automatically Close the screen manually
2-3) Terminate the Storage console
1
Click
13
Create a new bucket
Enter the name of bucket which you want to create and then click [Create]
Click the [Data Explorer] tab from the Object Storage control panel
Confirm that the bucket created is shown in [Object and folder]
You must set the bucket name so that it is unique through system If you create
the bucket with the name used by other user an error is displayed
3-1) Create the bucket
1
Click
Click
２
3
14
Delete the bucket
Select the bucket which you want to delete from [Select a bucket] and click [Delete] to
delete it
You cannot delete the bucket if it has an object First delete the object in bucket
and then delete the bucket
When you click [Delete] it is immediately deleted Confirm carefully and then
delete it
3-2) Delete the bucket
Click the [Explorer] tab from the Object Storage control panel
1
２
Click
Click
15
Select the bucket for which you want to create an object When you want to create the
object in folder click the folder targeted in [Name]
In order to register the object one or more buckets are necessary
Upload the object (file) to the bucket
Click the [Explorer] tab from the Object Storage control panel
1
2
3-3) Upload the object (file)
Click
16
Select the file targeted from Reference and click [Upload the file]
Confirm that the object registered in [Name] is shown
The file size to upload the file from the Storage console is up to 2G due to
limitation of recommended browser FireFox If you desire to upload the file of more
than 2G use Object Storage API
3-3) Upload the object (file)
Click
3
3
In order to register the folder enter the folder name and click [Create the folder]
When uploading the HTML file it can work as a static contents server
17
Check the checkbox of object which you want to delete in [Select the bucket] and then click
[Delete]
The confirmation screen appears Click [OK] to complete deletion
Delete the object
3-4) Delete the object
Click the [Explorer] tab from the Object Storage control panel
1
Click
Click
２
3
Click
18
Perform the public setting of bucket and object The setting method is common to bucket and
object
When you want to publish the bucket select the target bucket in [Select the bucket] and
click [Access right]
When you want to publish the object check the checkbox of target object and click
[Access right]
When you add the user and group which can access to bucket or object click [Add]
Public and Storage_User listed in the first line mean below
- Public Published on Internet
- Storage_User Published to all customers who use Object Storage
3-5) Publish the bucket and object
Click the [Explorer] tab from the Object Storage control panel
1
２
３
Click
Click
Click
Click
19
When editing the public setting of usergroup edit the public setting by using the
checkbox of target user or group respectively By default all public settings are allowed
－Readable
Allows to read the bucket or object
－Writable (only for bucket)
Allows to write in the bucket
－ACP readable
Allows to read the access policy of bucket or object
－ACP writable
Allows to write in the access policy of bucket or object
When deleting the already existing usergroup check the checkbox of usergroup
which you want to delete and then click [Delete]
When you click [Delete] it is immediately deleted Confirm carefully and then
delete it
3-5) Publish the bucket and object
3
Click
4
If the public setting of bucket is different from object one object one is preferred
The published object is accessible at URL below
http[Bucket name]strcloudn-servicecom[(Folder name)Object name]
20
When setting the public URL for object click [Public URL access]
You cannot set the public URL for bucket
3-5) Publish the bucket and object
５
Set [Allow reading] [Issue the secure URL (https)] [Maximum number of downloading] and
[Expiration date] Set only [Allow reading] or both [Allow reading] and [Issue the secure URL
(https)] and click [Save] to generate the URL
－Allow reading
Allows the access from external to the object
－Issue the secure URL (https)
Allows the secure access from external to the object
－Maximum number of downloading
Sets the maximum number of downloading
－Expiration date
Sets the expiration date for access from external
6
Click
21
After editing all public settings click [Save] to terminate
3-5) Publish the bucket and object
７
Click
22
Set the account profile This setting is not mandatory
Enter the account profile information and click [Save]
ldquoAccount Profile was modified successfully appears on top of screen The setting of
account profile is completed
Click the [Account] tab from the Object Storage control panel
Click
4-1) Set the account profile
1
２
２
Click
23
Confirm the access key and private key (secret key) required when using API
Click the [Security Credentials] tab to display the access key ID If you want to display the
private key (Secret Key) click [View Secret Key] in the [Actions]
The private key (Secret Key) is displayed
Click the [Account] tab from the Object Storage control panel
xxxxxxxxx
xxxxxxxxx
4-2) Confirm the API key
1
2
３
Click Click
Click
24
Search a user
Click the [Admin] tab from the Object Storage control panel
Enter and select the conditions to search the user and click [Search]
The result is shown in [User List]
Click [View User Data] to display the bucket and object of user
5-1) Search a user
1
２
３
Click
Click
Click
25
Display the usage amount of Object Storage as a report
Click the [Usage] tab from the Object Storage control panel
Do not use (Current Billing Period) and (Previous Billing Period) in [Time Period]
6-1) Display the usage report
1
Click ２
Enter in [Operation] [Time Period] and [Report Granularity] of report displayed [Group ID] setting
and [User]
－Operation
Select the type of report to be displayed from downstream data transfer (Data Transfer-In-Bytes)
upstream data transfer (Data Transfer-In-Bytes) total capacity (Storage-Bytes) number of object
(Storage-Objects) number of all requests (All Requests) number of requests received (Get
Requests) number of requests sent (Put Requests) and number of requests deleted (Delete
Requests)
－Time Period
Select the period to be displayed from (Last week) (Last Month) and (Custom Period) When
selecting Custom Period set the period
－Report Granularity
Select the unit of report to be displayed from (Hours) (Days) (Months) and actual data (Raw)
－Group ID
Select the group ID in order to browse the report
－User
In order to browse a specific user enter the user name
26
Click [List] to display the result in the list format
You can download the same result in CSV format by clicking [Download CSV]
Click [Graph] to display the result in the graph format
6-1) Display the usage report
3
4
3
1 Introduction P4 - 1) Overview of service
2) Preparation in advance
2 Operate the Storage Console P6- 1) Start using the Storage service
2) Start the Storage console
3) Terminate the Storage console
Contents
3 Manage the Bucket Object P13- 1) Create the bucket
2) Delete the bucket
3) Upload the object (file)
4) Delete the object
5) Publish the bucket and object
4 Manage the Account
P22- 1) Set the account profile
2) Confirm API key
5 Manage the User P24- 1) Search a user
6 Confirm the Report P25- 1) Display the usage report
Object Storage is the service to work with other Cloudn services to make the available storage
object-oriented and enable control from API or control panel
This service allows you to introduce the inexpensive storage service with fewer limitations for
Cloudⁿ account
Storage location
of object
in Japan DC
Storage location
of object
in USA DC
Customer
(Domestic site)
Customer
(Overseas site)
Cloudn
Virtual Server
Service
(Japan DC)
Cloudn
Virtual Server
Service
(USA DC)
Object Storage
Cloud(N) control panel
(Japan Data Center)
Cloud(N) control panel
(USA Data Center)
Japan Data Center
Features of Object Storage are shown below
Excellent cost performance to store a large volume of data
High robustness of 99999999999 (11-nine)
You can use it without concerning upper limit of capacity
In addition to the control panel it can be operated from API (compatible with S3
REST API)
1-1) Overview of service
Guide for Cloudⁿ
Prepare the Guide for 【Cloudⁿ】 sent when you submitted a new application of Cloudⁿ
Software to browse the control panel (browser software)
Firefox1801 or later is recommended
Note that a part may be not shown in other browser
Service to connect to Internet
Prepare the service to connect to Internet
Example Constant connection services such as OCN dial access service OCN ADSL connection service and Super OCN
You can use other company Internet connection service
If you are using a proxy server in your company confirm that https (port No 443) is open
Prepare the followings before using Object Storage
5
This section describes the client PC used at this Object Storage setup
1-2) Preparation in advance
6
In order to start using the Storage service start using it from the Cloudn portal or control
panel (only in West JapanUSA)
2-1) Start using the Storage service
Log in the Cloudⁿ portal and click [Start using] displayed by mouseover to [Sign Up
Now ] icon in the region used
2 A pop-up screen showing the service is starting appears Then the Object Storage
console screen appears
Click
1
Login method 1 【Start using from Cloudⁿ portal】
7
Login method 2 【Start using from control panel (only in West JapanUSA)】
2-1) Start using the Storage service
Click the [Manage Users] tab in the control panel
Select the user who uses Object Storage and click
２
1
Click
Click
8
2-1) Start using the Storage service
５
3
After the Storage account is added log in the control panel with the appropriate user to
show the [Storage console] tab where you can move to the Storage console screen
The screen of adding Storage account completed pops up Click the [Close] button
Click [Submit] in order to make Object Storage available
４
Click
Click
9
In order to start the Storage console start it from the Cloudn portal or control panel (only in
West JapanUSA)
The Storage console starts on a new window
2-2) Start the Storage console
Log in the Cloudⁿ portal and click [Console] displayed by mouseover to [Object
Storage] icon which you start using in the region used
２
Click
1
Login method 1 【Start from Cloudⁿ portal】
10
The Storage console starts on a new window
2-2) Start the Storage console
２
Click the [Object Storage] button in the control panel
Click
1
Login method 2 【Start from control panel (only in West JapanUSA)】
11
The following operations are available on the Storage console
2-2) Start the Storage console
A user with the Domain User privilege created in West Japan and USA Data
Centers cannot display the [Management] and [Usage fee] tabs
[Management] tab () The following functions are available under this tab
- Manage the user
Enables to manage the user who uses Object Storage
[Explorer] tab The following functions are available under this tab
- Create and delete the bucket
Enables to create and delete the bucket on Object
Storage and set the access right
- Create and delete the object
Enables to create and delete the object for each bucket
and set the access right
[Account] tab The following functions are available under this tab
- Account profile
Enables to set the profile of account
- Security certificate
Enables to browse disable and delete the access key
and private key (secret key) required when using API and
create new keys
[Usage amount] tab () The following functions are available under this tab
- Usage amount report
Enables to make the list CSV and graph of current
usage amount of Object Storage (capacity transfer
amount number of requests etc) and browse the report
12
Close the Storage console
Click [Log out] on the upper right portion of the Storage console
After logout [Logout] is shown on the window and the screen is not closed
automatically Close the screen manually
2-3) Terminate the Storage console
1
Click
13
Create a new bucket
Enter the name of bucket which you want to create and then click [Create]
Click the [Data Explorer] tab from the Object Storage control panel
Confirm that the bucket created is shown in [Object and folder]
You must set the bucket name so that it is unique through system If you create
the bucket with the name used by other user an error is displayed
3-1) Create the bucket
1
Click
Click
２
3
14
Delete the bucket
Select the bucket which you want to delete from [Select a bucket] and click [Delete] to
delete it
You cannot delete the bucket if it has an object First delete the object in bucket
and then delete the bucket
When you click [Delete] it is immediately deleted Confirm carefully and then
delete it
3-2) Delete the bucket
Click the [Explorer] tab from the Object Storage control panel
1
２
Click
Click
15
Select the bucket for which you want to create an object When you want to create the
object in folder click the folder targeted in [Name]
In order to register the object one or more buckets are necessary
Upload the object (file) to the bucket
Click the [Explorer] tab from the Object Storage control panel
1
2
3-3) Upload the object (file)
Click
16
Select the file targeted from Reference and click [Upload the file]
Confirm that the object registered in [Name] is shown
The file size to upload the file from the Storage console is up to 2G due to
limitation of recommended browser FireFox If you desire to upload the file of more
than 2G use Object Storage API
3-3) Upload the object (file)
Click
3
3
In order to register the folder enter the folder name and click [Create the folder]
When uploading the HTML file it can work as a static contents server
17
Check the checkbox of object which you want to delete in [Select the bucket] and then click
[Delete]
The confirmation screen appears Click [OK] to complete deletion
Delete the object
3-4) Delete the object
Click the [Explorer] tab from the Object Storage control panel
1
Click
Click
２
3
Click
18
Perform the public setting of bucket and object The setting method is common to bucket and
object
When you want to publish the bucket select the target bucket in [Select the bucket] and
click [Access right]
When you want to publish the object check the checkbox of target object and click
[Access right]
When you add the user and group which can access to bucket or object click [Add]
Public and Storage_User listed in the first line mean below
- Public Published on Internet
- Storage_User Published to all customers who use Object Storage
3-5) Publish the bucket and object
Click the [Explorer] tab from the Object Storage control panel
1
２
３
Click
Click
Click
Click
19
When editing the public setting of usergroup edit the public setting by using the
checkbox of target user or group respectively By default all public settings are allowed
－Readable
Allows to read the bucket or object
－Writable (only for bucket)
Allows to write in the bucket
－ACP readable
Allows to read the access policy of bucket or object
－ACP writable
Allows to write in the access policy of bucket or object
When deleting the already existing usergroup check the checkbox of usergroup
which you want to delete and then click [Delete]
When you click [Delete] it is immediately deleted Confirm carefully and then
delete it
3-5) Publish the bucket and object
3
Click
4
If the public setting of bucket is different from object one object one is preferred
The published object is accessible at URL below
http[Bucket name]strcloudn-servicecom[(Folder name)Object name]
20
When setting the public URL for object click [Public URL access]
You cannot set the public URL for bucket
3-5) Publish the bucket and object
５
Set [Allow reading] [Issue the secure URL (https)] [Maximum number of downloading] and
[Expiration date] Set only [Allow reading] or both [Allow reading] and [Issue the secure URL
(https)] and click [Save] to generate the URL
－Allow reading
Allows the access from external to the object
－Issue the secure URL (https)
Allows the secure access from external to the object
－Maximum number of downloading
Sets the maximum number of downloading
－Expiration date
Sets the expiration date for access from external
6
Click
21
After editing all public settings click [Save] to terminate
3-5) Publish the bucket and object
７
Click
22
Set the account profile This setting is not mandatory
Enter the account profile information and click [Save]
ldquoAccount Profile was modified successfully appears on top of screen The setting of
account profile is completed
Click the [Account] tab from the Object Storage control panel
Click
4-1) Set the account profile
1
２
２
Click
23
Confirm the access key and private key (secret key) required when using API
Click the [Security Credentials] tab to display the access key ID If you want to display the
private key (Secret Key) click [View Secret Key] in the [Actions]
The private key (Secret Key) is displayed
Click the [Account] tab from the Object Storage control panel
xxxxxxxxx
xxxxxxxxx
4-2) Confirm the API key
1
2
３
Click Click
Click
24
Search a user
Click the [Admin] tab from the Object Storage control panel
Enter and select the conditions to search the user and click [Search]
The result is shown in [User List]
Click [View User Data] to display the bucket and object of user
5-1) Search a user
1
２
３
Click
Click
Click
25
Display the usage amount of Object Storage as a report
Click the [Usage] tab from the Object Storage control panel
Do not use (Current Billing Period) and (Previous Billing Period) in [Time Period]
6-1) Display the usage report
1
Click ２
Enter in [Operation] [Time Period] and [Report Granularity] of report displayed [Group ID] setting
and [User]
－Operation
Select the type of report to be displayed from downstream data transfer (Data Transfer-In-Bytes)
upstream data transfer (Data Transfer-In-Bytes) total capacity (Storage-Bytes) number of object
(Storage-Objects) number of all requests (All Requests) number of requests received (Get
Requests) number of requests sent (Put Requests) and number of requests deleted (Delete
Requests)
－Time Period
Select the period to be displayed from (Last week) (Last Month) and (Custom Period) When
selecting Custom Period set the period
－Report Granularity
Select the unit of report to be displayed from (Hours) (Days) (Months) and actual data (Raw)
－Group ID
Select the group ID in order to browse the report
－User
In order to browse a specific user enter the user name
26
Click [List] to display the result in the list format
You can download the same result in CSV format by clicking [Download CSV]
Click [Graph] to display the result in the graph format
6-1) Display the usage report
3
4
Object Storage is the service to work with other Cloudn services to make the available storage
object-oriented and enable control from API or control panel
This service allows you to introduce the inexpensive storage service with fewer limitations for
Cloudⁿ account
Storage location
of object
in Japan DC
Storage location
of object
in USA DC
Customer
(Domestic site)
Customer
(Overseas site)
Cloudn
Virtual Server
Service
(Japan DC)
Cloudn
Virtual Server
Service
(USA DC)
Object Storage
Cloud(N) control panel
(Japan Data Center)
Cloud(N) control panel
(USA Data Center)
Japan Data Center
Features of Object Storage are shown below
Excellent cost performance to store a large volume of data
High robustness of 99999999999 (11-nine)
You can use it without concerning upper limit of capacity
In addition to the control panel it can be operated from API (compatible with S3
REST API)
1-1) Overview of service
Guide for Cloudⁿ
Prepare the Guide for 【Cloudⁿ】 sent when you submitted a new application of Cloudⁿ
Software to browse the control panel (browser software)
Firefox1801 or later is recommended
Note that a part may be not shown in other browser
Service to connect to Internet
Prepare the service to connect to Internet
Example Constant connection services such as OCN dial access service OCN ADSL connection service and Super OCN
You can use other company Internet connection service
If you are using a proxy server in your company confirm that https (port No 443) is open
Prepare the followings before using Object Storage
5
This section describes the client PC used at this Object Storage setup
1-2) Preparation in advance
6
In order to start using the Storage service start using it from the Cloudn portal or control
panel (only in West JapanUSA)
2-1) Start using the Storage service
Log in the Cloudⁿ portal and click [Start using] displayed by mouseover to [Sign Up
Now ] icon in the region used
2 A pop-up screen showing the service is starting appears Then the Object Storage
console screen appears
Click
1
Login method 1 【Start using from Cloudⁿ portal】
7
Login method 2 【Start using from control panel (only in West JapanUSA)】
2-1) Start using the Storage service
Click the [Manage Users] tab in the control panel
Select the user who uses Object Storage and click
２
1
Click
Click
8
2-1) Start using the Storage service
５
3
After the Storage account is added log in the control panel with the appropriate user to
show the [Storage console] tab where you can move to the Storage console screen
The screen of adding Storage account completed pops up Click the [Close] button
Click [Submit] in order to make Object Storage available
４
Click
Click
9
In order to start the Storage console start it from the Cloudn portal or control panel (only in
West JapanUSA)
The Storage console starts on a new window
2-2) Start the Storage console
Log in the Cloudⁿ portal and click [Console] displayed by mouseover to [Object
Storage] icon which you start using in the region used
２
Click
1
Login method 1 【Start from Cloudⁿ portal】
10
The Storage console starts on a new window
2-2) Start the Storage console
２
Click the [Object Storage] button in the control panel
Click
1
Login method 2 【Start from control panel (only in West JapanUSA)】
11
The following operations are available on the Storage console
2-2) Start the Storage console
A user with the Domain User privilege created in West Japan and USA Data
Centers cannot display the [Management] and [Usage fee] tabs
[Management] tab () The following functions are available under this tab
- Manage the user
Enables to manage the user who uses Object Storage
[Explorer] tab The following functions are available under this tab
- Create and delete the bucket
Enables to create and delete the bucket on Object
Storage and set the access right
- Create and delete the object
Enables to create and delete the object for each bucket
and set the access right
[Account] tab The following functions are available under this tab
- Account profile
Enables to set the profile of account
- Security certificate
Enables to browse disable and delete the access key
and private key (secret key) required when using API and
create new keys
[Usage amount] tab () The following functions are available under this tab
- Usage amount report
Enables to make the list CSV and graph of current
usage amount of Object Storage (capacity transfer
amount number of requests etc) and browse the report
12
Close the Storage console
Click [Log out] on the upper right portion of the Storage console
After logout [Logout] is shown on the window and the screen is not closed
automatically Close the screen manually
2-3) Terminate the Storage console
1
Click
13
Create a new bucket
Enter the name of bucket which you want to create and then click [Create]
Click the [Data Explorer] tab from the Object Storage control panel
Confirm that the bucket created is shown in [Object and folder]
You must set the bucket name so that it is unique through system If you create
the bucket with the name used by other user an error is displayed
3-1) Create the bucket
1
Click
Click
２
3
14
Delete the bucket
Select the bucket which you want to delete from [Select a bucket] and click [Delete] to
delete it
You cannot delete the bucket if it has an object First delete the object in bucket
and then delete the bucket
When you click [Delete] it is immediately deleted Confirm carefully and then
delete it
3-2) Delete the bucket
Click the [Explorer] tab from the Object Storage control panel
1
２
Click
Click
15
Select the bucket for which you want to create an object When you want to create the
object in folder click the folder targeted in [Name]
In order to register the object one or more buckets are necessary
Upload the object (file) to the bucket
Click the [Explorer] tab from the Object Storage control panel
1
2
3-3) Upload the object (file)
Click
16
Select the file targeted from Reference and click [Upload the file]
Confirm that the object registered in [Name] is shown
The file size to upload the file from the Storage console is up to 2G due to
limitation of recommended browser FireFox If you desire to upload the file of more
than 2G use Object Storage API
3-3) Upload the object (file)
Click
3
3
In order to register the folder enter the folder name and click [Create the folder]
When uploading the HTML file it can work as a static contents server
17
Check the checkbox of object which you want to delete in [Select the bucket] and then click
[Delete]
The confirmation screen appears Click [OK] to complete deletion
Delete the object
3-4) Delete the object
Click the [Explorer] tab from the Object Storage control panel
1
Click
Click
２
3
Click
18
Perform the public setting of bucket and object The setting method is common to bucket and
object
When you want to publish the bucket select the target bucket in [Select the bucket] and
click [Access right]
When you want to publish the object check the checkbox of target object and click
[Access right]
When you add the user and group which can access to bucket or object click [Add]
Public and Storage_User listed in the first line mean below
- Public Published on Internet
- Storage_User Published to all customers who use Object Storage
3-5) Publish the bucket and object
Click the [Explorer] tab from the Object Storage control panel
1
２
３
Click
Click
Click
Click
19
When editing the public setting of usergroup edit the public setting by using the
checkbox of target user or group respectively By default all public settings are allowed
－Readable
Allows to read the bucket or object
－Writable (only for bucket)
Allows to write in the bucket
－ACP readable
Allows to read the access policy of bucket or object
－ACP writable
Allows to write in the access policy of bucket or object
When deleting the already existing usergroup check the checkbox of usergroup
which you want to delete and then click [Delete]
When you click [Delete] it is immediately deleted Confirm carefully and then
delete it
3-5) Publish the bucket and object
3
Click
4
If the public setting of bucket is different from object one object one is preferred
The published object is accessible at URL below
http[Bucket name]strcloudn-servicecom[(Folder name)Object name]
20
When setting the public URL for object click [Public URL access]
You cannot set the public URL for bucket
3-5) Publish the bucket and object
５
Set [Allow reading] [Issue the secure URL (https)] [Maximum number of downloading] and
[Expiration date] Set only [Allow reading] or both [Allow reading] and [Issue the secure URL
(https)] and click [Save] to generate the URL
－Allow reading
Allows the access from external to the object
－Issue the secure URL (https)
Allows the secure access from external to the object
－Maximum number of downloading
Sets the maximum number of downloading
－Expiration date
Sets the expiration date for access from external
6
Click
21
After editing all public settings click [Save] to terminate
3-5) Publish the bucket and object
７
Click
22
Set the account profile This setting is not mandatory
Enter the account profile information and click [Save]
ldquoAccount Profile was modified successfully appears on top of screen The setting of
account profile is completed
Click the [Account] tab from the Object Storage control panel
Click
4-1) Set the account profile
1
２
２
Click
23
Confirm the access key and private key (secret key) required when using API
Click the [Security Credentials] tab to display the access key ID If you want to display the
private key (Secret Key) click [View Secret Key] in the [Actions]
The private key (Secret Key) is displayed
Click the [Account] tab from the Object Storage control panel
xxxxxxxxx
xxxxxxxxx
4-2) Confirm the API key
1
2
３
Click Click
Click
24
Search a user
Click the [Admin] tab from the Object Storage control panel
Enter and select the conditions to search the user and click [Search]
The result is shown in [User List]
Click [View User Data] to display the bucket and object of user
5-1) Search a user
1
２
３
Click
Click
Click
25
Display the usage amount of Object Storage as a report
Click the [Usage] tab from the Object Storage control panel
Do not use (Current Billing Period) and (Previous Billing Period) in [Time Period]
6-1) Display the usage report
1
Click ２
Enter in [Operation] [Time Period] and [Report Granularity] of report displayed [Group ID] setting
and [User]
－Operation
Select the type of report to be displayed from downstream data transfer (Data Transfer-In-Bytes)
upstream data transfer (Data Transfer-In-Bytes) total capacity (Storage-Bytes) number of object
(Storage-Objects) number of all requests (All Requests) number of requests received (Get
Requests) number of requests sent (Put Requests) and number of requests deleted (Delete
Requests)
－Time Period
Select the period to be displayed from (Last week) (Last Month) and (Custom Period) When
selecting Custom Period set the period
－Report Granularity
Select the unit of report to be displayed from (Hours) (Days) (Months) and actual data (Raw)
－Group ID
Select the group ID in order to browse the report
－User
In order to browse a specific user enter the user name
26
Click [List] to display the result in the list format
You can download the same result in CSV format by clicking [Download CSV]
Click [Graph] to display the result in the graph format
6-1) Display the usage report
3
4
Guide for Cloudⁿ
Prepare the Guide for 【Cloudⁿ】 sent when you submitted a new application of Cloudⁿ
Software to browse the control panel (browser software)
Firefox1801 or later is recommended
Note that a part may be not shown in other browser
Service to connect to Internet
Prepare the service to connect to Internet
Example Constant connection services such as OCN dial access service OCN ADSL connection service and Super OCN
You can use other company Internet connection service
If you are using a proxy server in your company confirm that https (port No 443) is open
Prepare the followings before using Object Storage
5
This section describes the client PC used at this Object Storage setup
1-2) Preparation in advance
6
In order to start using the Storage service start using it from the Cloudn portal or control
panel (only in West JapanUSA)
2-1) Start using the Storage service
Log in the Cloudⁿ portal and click [Start using] displayed by mouseover to [Sign Up
Now ] icon in the region used
2 A pop-up screen showing the service is starting appears Then the Object Storage
console screen appears
Click
1
Login method 1 【Start using from Cloudⁿ portal】
7
Login method 2 【Start using from control panel (only in West JapanUSA)】
2-1) Start using the Storage service
Click the [Manage Users] tab in the control panel
Select the user who uses Object Storage and click
２
1
Click
Click
8
2-1) Start using the Storage service
５
3
After the Storage account is added log in the control panel with the appropriate user to
show the [Storage console] tab where you can move to the Storage console screen
The screen of adding Storage account completed pops up Click the [Close] button
Click [Submit] in order to make Object Storage available
４
Click
Click
9
In order to start the Storage console start it from the Cloudn portal or control panel (only in
West JapanUSA)
The Storage console starts on a new window
2-2) Start the Storage console
Log in the Cloudⁿ portal and click [Console] displayed by mouseover to [Object
Storage] icon which you start using in the region used
２
Click
1
Login method 1 【Start from Cloudⁿ portal】
10
The Storage console starts on a new window
2-2) Start the Storage console
２
Click the [Object Storage] button in the control panel
Click
1
Login method 2 【Start from control panel (only in West JapanUSA)】
11
The following operations are available on the Storage console
2-2) Start the Storage console
A user with the Domain User privilege created in West Japan and USA Data
Centers cannot display the [Management] and [Usage fee] tabs
[Management] tab () The following functions are available under this tab
- Manage the user
Enables to manage the user who uses Object Storage
[Explorer] tab The following functions are available under this tab
- Create and delete the bucket
Enables to create and delete the bucket on Object
Storage and set the access right
- Create and delete the object
Enables to create and delete the object for each bucket
and set the access right
[Account] tab The following functions are available under this tab
- Account profile
Enables to set the profile of account
- Security certificate
Enables to browse disable and delete the access key
and private key (secret key) required when using API and
create new keys
[Usage amount] tab () The following functions are available under this tab
- Usage amount report
Enables to make the list CSV and graph of current
usage amount of Object Storage (capacity transfer
amount number of requests etc) and browse the report
12
Close the Storage console
Click [Log out] on the upper right portion of the Storage console
After logout [Logout] is shown on the window and the screen is not closed
automatically Close the screen manually
2-3) Terminate the Storage console
1
Click
13
Create a new bucket
Enter the name of bucket which you want to create and then click [Create]
Click the [Data Explorer] tab from the Object Storage control panel
Confirm that the bucket created is shown in [Object and folder]
You must set the bucket name so that it is unique through system If you create
the bucket with the name used by other user an error is displayed
3-1) Create the bucket
1
Click
Click
２
3
14
Delete the bucket
Select the bucket which you want to delete from [Select a bucket] and click [Delete] to
delete it
You cannot delete the bucket if it has an object First delete the object in bucket
and then delete the bucket
When you click [Delete] it is immediately deleted Confirm carefully and then
delete it
3-2) Delete the bucket
Click the [Explorer] tab from the Object Storage control panel
1
２
Click
Click
15
Select the bucket for which you want to create an object When you want to create the
object in folder click the folder targeted in [Name]
In order to register the object one or more buckets are necessary
Upload the object (file) to the bucket
Click the [Explorer] tab from the Object Storage control panel
1
2
3-3) Upload the object (file)
Click
16
Select the file targeted from Reference and click [Upload the file]
Confirm that the object registered in [Name] is shown
The file size to upload the file from the Storage console is up to 2G due to
limitation of recommended browser FireFox If you desire to upload the file of more
than 2G use Object Storage API
3-3) Upload the object (file)
Click
3
3
In order to register the folder enter the folder name and click [Create the folder]
When uploading the HTML file it can work as a static contents server
17
Check the checkbox of object which you want to delete in [Select the bucket] and then click
[Delete]
The confirmation screen appears Click [OK] to complete deletion
Delete the object
3-4) Delete the object
Click the [Explorer] tab from the Object Storage control panel
1
Click
Click
２
3
Click
18
Perform the public setting of bucket and object The setting method is common to bucket and
object
When you want to publish the bucket select the target bucket in [Select the bucket] and
click [Access right]
When you want to publish the object check the checkbox of target object and click
[Access right]
When you add the user and group which can access to bucket or object click [Add]
Public and Storage_User listed in the first line mean below
- Public Published on Internet
- Storage_User Published to all customers who use Object Storage
3-5) Publish the bucket and object
Click the [Explorer] tab from the Object Storage control panel
1
２
３
Click
Click
Click
Click
19
When editing the public setting of usergroup edit the public setting by using the
checkbox of target user or group respectively By default all public settings are allowed
－Readable
Allows to read the bucket or object
－Writable (only for bucket)
Allows to write in the bucket
－ACP readable
Allows to read the access policy of bucket or object
－ACP writable
Allows to write in the access policy of bucket or object
When deleting the already existing usergroup check the checkbox of usergroup
which you want to delete and then click [Delete]
When you click [Delete] it is immediately deleted Confirm carefully and then
delete it
3-5) Publish the bucket and object
3
Click
4
If the public setting of bucket is different from object one object one is preferred
The published object is accessible at URL below
http[Bucket name]strcloudn-servicecom[(Folder name)Object name]
20
When setting the public URL for object click [Public URL access]
You cannot set the public URL for bucket
3-5) Publish the bucket and object
５
Set [Allow reading] [Issue the secure URL (https)] [Maximum number of downloading] and
[Expiration date] Set only [Allow reading] or both [Allow reading] and [Issue the secure URL
(https)] and click [Save] to generate the URL
－Allow reading
Allows the access from external to the object
－Issue the secure URL (https)
Allows the secure access from external to the object
－Maximum number of downloading
Sets the maximum number of downloading
－Expiration date
Sets the expiration date for access from external
6
Click
21
After editing all public settings click [Save] to terminate
3-5) Publish the bucket and object
７
Click
22
Set the account profile This setting is not mandatory
Enter the account profile information and click [Save]
ldquoAccount Profile was modified successfully appears on top of screen The setting of
account profile is completed
Click the [Account] tab from the Object Storage control panel
Click
4-1) Set the account profile
1
２
２
Click
23
Confirm the access key and private key (secret key) required when using API
Click the [Security Credentials] tab to display the access key ID If you want to display the
private key (Secret Key) click [View Secret Key] in the [Actions]
The private key (Secret Key) is displayed
Click the [Account] tab from the Object Storage control panel
xxxxxxxxx
xxxxxxxxx
4-2) Confirm the API key
1
2
３
Click Click
Click
24
Search a user
Click the [Admin] tab from the Object Storage control panel
Enter and select the conditions to search the user and click [Search]
The result is shown in [User List]
Click [View User Data] to display the bucket and object of user
5-1) Search a user
1
２
３
Click
Click
Click
25
Display the usage amount of Object Storage as a report
Click the [Usage] tab from the Object Storage control panel
Do not use (Current Billing Period) and (Previous Billing Period) in [Time Period]
6-1) Display the usage report
1
Click ２
Enter in [Operation] [Time Period] and [Report Granularity] of report displayed [Group ID] setting
and [User]
－Operation
Select the type of report to be displayed from downstream data transfer (Data Transfer-In-Bytes)
upstream data transfer (Data Transfer-In-Bytes) total capacity (Storage-Bytes) number of object
(Storage-Objects) number of all requests (All Requests) number of requests received (Get
Requests) number of requests sent (Put Requests) and number of requests deleted (Delete
Requests)
－Time Period
Select the period to be displayed from (Last week) (Last Month) and (Custom Period) When
selecting Custom Period set the period
－Report Granularity
Select the unit of report to be displayed from (Hours) (Days) (Months) and actual data (Raw)
－Group ID
Select the group ID in order to browse the report
－User
In order to browse a specific user enter the user name
26
Click [List] to display the result in the list format
You can download the same result in CSV format by clicking [Download CSV]
Click [Graph] to display the result in the graph format
6-1) Display the usage report
3
4
6
In order to start using the Storage service start using it from the Cloudn portal or control
panel (only in West JapanUSA)
2-1) Start using the Storage service
Log in the Cloudⁿ portal and click [Start using] displayed by mouseover to [Sign Up
Now ] icon in the region used
2 A pop-up screen showing the service is starting appears Then the Object Storage
console screen appears
Click
1
Login method 1 【Start using from Cloudⁿ portal】
7
Login method 2 【Start using from control panel (only in West JapanUSA)】
2-1) Start using the Storage service
Click the [Manage Users] tab in the control panel
Select the user who uses Object Storage and click
２
1
Click
Click
8
2-1) Start using the Storage service
５
3
After the Storage account is added log in the control panel with the appropriate user to
show the [Storage console] tab where you can move to the Storage console screen
The screen of adding Storage account completed pops up Click the [Close] button
Click [Submit] in order to make Object Storage available
４
Click
Click
9
In order to start the Storage console start it from the Cloudn portal or control panel (only in
West JapanUSA)
The Storage console starts on a new window
2-2) Start the Storage console
Log in the Cloudⁿ portal and click [Console] displayed by mouseover to [Object
Storage] icon which you start using in the region used
２
Click
1
Login method 1 【Start from Cloudⁿ portal】
10
The Storage console starts on a new window
2-2) Start the Storage console
２
Click the [Object Storage] button in the control panel
Click
1
Login method 2 【Start from control panel (only in West JapanUSA)】
11
The following operations are available on the Storage console
2-2) Start the Storage console
A user with the Domain User privilege created in West Japan and USA Data
Centers cannot display the [Management] and [Usage fee] tabs
[Management] tab () The following functions are available under this tab
- Manage the user
Enables to manage the user who uses Object Storage
[Explorer] tab The following functions are available under this tab
- Create and delete the bucket
Enables to create and delete the bucket on Object
Storage and set the access right
- Create and delete the object
Enables to create and delete the object for each bucket
and set the access right
[Account] tab The following functions are available under this tab
- Account profile
Enables to set the profile of account
- Security certificate
Enables to browse disable and delete the access key
and private key (secret key) required when using API and
create new keys
[Usage amount] tab () The following functions are available under this tab
- Usage amount report
Enables to make the list CSV and graph of current
usage amount of Object Storage (capacity transfer
amount number of requests etc) and browse the report
12
Close the Storage console
Click [Log out] on the upper right portion of the Storage console
After logout [Logout] is shown on the window and the screen is not closed
automatically Close the screen manually
2-3) Terminate the Storage console
1
Click
13
Create a new bucket
Enter the name of bucket which you want to create and then click [Create]
Click the [Data Explorer] tab from the Object Storage control panel
Confirm that the bucket created is shown in [Object and folder]
You must set the bucket name so that it is unique through system If you create
the bucket with the name used by other user an error is displayed
3-1) Create the bucket
1
Click
Click
２
3
14
Delete the bucket
Select the bucket which you want to delete from [Select a bucket] and click [Delete] to
delete it
You cannot delete the bucket if it has an object First delete the object in bucket
and then delete the bucket
When you click [Delete] it is immediately deleted Confirm carefully and then
delete it
3-2) Delete the bucket
Click the [Explorer] tab from the Object Storage control panel
1
２
Click
Click
15
Select the bucket for which you want to create an object When you want to create the
object in folder click the folder targeted in [Name]
In order to register the object one or more buckets are necessary
Upload the object (file) to the bucket
Click the [Explorer] tab from the Object Storage control panel
1
2
3-3) Upload the object (file)
Click
16
Select the file targeted from Reference and click [Upload the file]
Confirm that the object registered in [Name] is shown
The file size to upload the file from the Storage console is up to 2G due to
limitation of recommended browser FireFox If you desire to upload the file of more
than 2G use Object Storage API
3-3) Upload the object (file)
Click
3
3
In order to register the folder enter the folder name and click [Create the folder]
When uploading the HTML file it can work as a static contents server
17
Check the checkbox of object which you want to delete in [Select the bucket] and then click
[Delete]
The confirmation screen appears Click [OK] to complete deletion
Delete the object
3-4) Delete the object
Click the [Explorer] tab from the Object Storage control panel
1
Click
Click
２
3
Click
18
Perform the public setting of bucket and object The setting method is common to bucket and
object
When you want to publish the bucket select the target bucket in [Select the bucket] and
click [Access right]
When you want to publish the object check the checkbox of target object and click
[Access right]
When you add the user and group which can access to bucket or object click [Add]
Public and Storage_User listed in the first line mean below
- Public Published on Internet
- Storage_User Published to all customers who use Object Storage
3-5) Publish the bucket and object
Click the [Explorer] tab from the Object Storage control panel
1
２
３
Click
Click
Click
Click
19
When editing the public setting of usergroup edit the public setting by using the
checkbox of target user or group respectively By default all public settings are allowed
－Readable
Allows to read the bucket or object
－Writable (only for bucket)
Allows to write in the bucket
－ACP readable
Allows to read the access policy of bucket or object
－ACP writable
Allows to write in the access policy of bucket or object
When deleting the already existing usergroup check the checkbox of usergroup
which you want to delete and then click [Delete]
When you click [Delete] it is immediately deleted Confirm carefully and then
delete it
3-5) Publish the bucket and object
3
Click
4
If the public setting of bucket is different from object one object one is preferred
The published object is accessible at URL below
http[Bucket name]strcloudn-servicecom[(Folder name)Object name]
20
When setting the public URL for object click [Public URL access]
You cannot set the public URL for bucket
3-5) Publish the bucket and object
５
Set [Allow reading] [Issue the secure URL (https)] [Maximum number of downloading] and
[Expiration date] Set only [Allow reading] or both [Allow reading] and [Issue the secure URL
(https)] and click [Save] to generate the URL
－Allow reading
Allows the access from external to the object
－Issue the secure URL (https)
Allows the secure access from external to the object
－Maximum number of downloading
Sets the maximum number of downloading
－Expiration date
Sets the expiration date for access from external
6
Click
21
After editing all public settings click [Save] to terminate
3-5) Publish the bucket and object
７
Click
22
Set the account profile This setting is not mandatory
Enter the account profile information and click [Save]
ldquoAccount Profile was modified successfully appears on top of screen The setting of
account profile is completed
Click the [Account] tab from the Object Storage control panel
Click
4-1) Set the account profile
1
２
２
Click
23
Confirm the access key and private key (secret key) required when using API
Click the [Security Credentials] tab to display the access key ID If you want to display the
private key (Secret Key) click [View Secret Key] in the [Actions]
The private key (Secret Key) is displayed
Click the [Account] tab from the Object Storage control panel
xxxxxxxxx
xxxxxxxxx
4-2) Confirm the API key
1
2
３
Click Click
Click
24
Search a user
Click the [Admin] tab from the Object Storage control panel
Enter and select the conditions to search the user and click [Search]
The result is shown in [User List]
Click [View User Data] to display the bucket and object of user
5-1) Search a user
1
２
３
Click
Click
Click
25
Display the usage amount of Object Storage as a report
Click the [Usage] tab from the Object Storage control panel
Do not use (Current Billing Period) and (Previous Billing Period) in [Time Period]
6-1) Display the usage report
1
Click ２
Enter in [Operation] [Time Period] and [Report Granularity] of report displayed [Group ID] setting
and [User]
－Operation
Select the type of report to be displayed from downstream data transfer (Data Transfer-In-Bytes)
upstream data transfer (Data Transfer-In-Bytes) total capacity (Storage-Bytes) number of object
(Storage-Objects) number of all requests (All Requests) number of requests received (Get
Requests) number of requests sent (Put Requests) and number of requests deleted (Delete
Requests)
－Time Period
Select the period to be displayed from (Last week) (Last Month) and (Custom Period) When
selecting Custom Period set the period
－Report Granularity
Select the unit of report to be displayed from (Hours) (Days) (Months) and actual data (Raw)
－Group ID
Select the group ID in order to browse the report
－User
In order to browse a specific user enter the user name
26
Click [List] to display the result in the list format
You can download the same result in CSV format by clicking [Download CSV]
Click [Graph] to display the result in the graph format
6-1) Display the usage report
3
4
7
Login method 2 【Start using from control panel (only in West JapanUSA)】
2-1) Start using the Storage service
Click the [Manage Users] tab in the control panel
Select the user who uses Object Storage and click
２
1
Click
Click
8
2-1) Start using the Storage service
５
3
After the Storage account is added log in the control panel with the appropriate user to
show the [Storage console] tab where you can move to the Storage console screen
The screen of adding Storage account completed pops up Click the [Close] button
Click [Submit] in order to make Object Storage available
４
Click
Click
9
In order to start the Storage console start it from the Cloudn portal or control panel (only in
West JapanUSA)
The Storage console starts on a new window
2-2) Start the Storage console
Log in the Cloudⁿ portal and click [Console] displayed by mouseover to [Object
Storage] icon which you start using in the region used
２
Click
1
Login method 1 【Start from Cloudⁿ portal】
10
The Storage console starts on a new window
2-2) Start the Storage console
２
Click the [Object Storage] button in the control panel
Click
1
Login method 2 【Start from control panel (only in West JapanUSA)】
11
The following operations are available on the Storage console
2-2) Start the Storage console
A user with the Domain User privilege created in West Japan and USA Data
Centers cannot display the [Management] and [Usage fee] tabs
[Management] tab () The following functions are available under this tab
- Manage the user
Enables to manage the user who uses Object Storage
[Explorer] tab The following functions are available under this tab
- Create and delete the bucket
Enables to create and delete the bucket on Object
Storage and set the access right
- Create and delete the object
Enables to create and delete the object for each bucket
and set the access right
[Account] tab The following functions are available under this tab
- Account profile
Enables to set the profile of account
- Security certificate
Enables to browse disable and delete the access key
and private key (secret key) required when using API and
create new keys
[Usage amount] tab () The following functions are available under this tab
- Usage amount report
Enables to make the list CSV and graph of current
usage amount of Object Storage (capacity transfer
amount number of requests etc) and browse the report
12
Close the Storage console
Click [Log out] on the upper right portion of the Storage console
After logout [Logout] is shown on the window and the screen is not closed
automatically Close the screen manually
2-3) Terminate the Storage console
1
Click
13
Create a new bucket
Enter the name of bucket which you want to create and then click [Create]
Click the [Data Explorer] tab from the Object Storage control panel
Confirm that the bucket created is shown in [Object and folder]
You must set the bucket name so that it is unique through system If you create
the bucket with the name used by other user an error is displayed
3-1) Create the bucket
1
Click
Click
２
3
14
Delete the bucket
Select the bucket which you want to delete from [Select a bucket] and click [Delete] to
delete it
You cannot delete the bucket if it has an object First delete the object in bucket
and then delete the bucket
When you click [Delete] it is immediately deleted Confirm carefully and then
delete it
3-2) Delete the bucket
Click the [Explorer] tab from the Object Storage control panel
1
２
Click
Click
15
Select the bucket for which you want to create an object When you want to create the
object in folder click the folder targeted in [Name]
In order to register the object one or more buckets are necessary
Upload the object (file) to the bucket
Click the [Explorer] tab from the Object Storage control panel
1
2
3-3) Upload the object (file)
Click
16
Select the file targeted from Reference and click [Upload the file]
Confirm that the object registered in [Name] is shown
The file size to upload the file from the Storage console is up to 2G due to
limitation of recommended browser FireFox If you desire to upload the file of more
than 2G use Object Storage API
3-3) Upload the object (file)
Click
3
3
In order to register the folder enter the folder name and click [Create the folder]
When uploading the HTML file it can work as a static contents server
17
Check the checkbox of object which you want to delete in [Select the bucket] and then click
[Delete]
The confirmation screen appears Click [OK] to complete deletion
Delete the object
3-4) Delete the object
Click the [Explorer] tab from the Object Storage control panel
1
Click
Click
２
3
Click
18
Perform the public setting of bucket and object The setting method is common to bucket and
object
When you want to publish the bucket select the target bucket in [Select the bucket] and
click [Access right]
When you want to publish the object check the checkbox of target object and click
[Access right]
When you add the user and group which can access to bucket or object click [Add]
Public and Storage_User listed in the first line mean below
- Public Published on Internet
- Storage_User Published to all customers who use Object Storage
3-5) Publish the bucket and object
Click the [Explorer] tab from the Object Storage control panel
1
２
３
Click
Click
Click
Click
19
When editing the public setting of usergroup edit the public setting by using the
checkbox of target user or group respectively By default all public settings are allowed
－Readable
Allows to read the bucket or object
－Writable (only for bucket)
Allows to write in the bucket
－ACP readable
Allows to read the access policy of bucket or object
－ACP writable
Allows to write in the access policy of bucket or object
When deleting the already existing usergroup check the checkbox of usergroup
which you want to delete and then click [Delete]
When you click [Delete] it is immediately deleted Confirm carefully and then
delete it
3-5) Publish the bucket and object
3
Click
4
If the public setting of bucket is different from object one object one is preferred
The published object is accessible at URL below
http[Bucket name]strcloudn-servicecom[(Folder name)Object name]
20
When setting the public URL for object click [Public URL access]
You cannot set the public URL for bucket
3-5) Publish the bucket and object
５
Set [Allow reading] [Issue the secure URL (https)] [Maximum number of downloading] and
[Expiration date] Set only [Allow reading] or both [Allow reading] and [Issue the secure URL
(https)] and click [Save] to generate the URL
－Allow reading
Allows the access from external to the object
－Issue the secure URL (https)
Allows the secure access from external to the object
－Maximum number of downloading
Sets the maximum number of downloading
－Expiration date
Sets the expiration date for access from external
6
Click
21
After editing all public settings click [Save] to terminate
3-5) Publish the bucket and object
７
Click
22
Set the account profile This setting is not mandatory
Enter the account profile information and click [Save]
ldquoAccount Profile was modified successfully appears on top of screen The setting of
account profile is completed
Click the [Account] tab from the Object Storage control panel
Click
4-1) Set the account profile
1
２
２
Click
23
Confirm the access key and private key (secret key) required when using API
Click the [Security Credentials] tab to display the access key ID If you want to display the
private key (Secret Key) click [View Secret Key] in the [Actions]
The private key (Secret Key) is displayed
Click the [Account] tab from the Object Storage control panel
xxxxxxxxx
xxxxxxxxx
4-2) Confirm the API key
1
2
３
Click Click
Click
24
Search a user
Click the [Admin] tab from the Object Storage control panel
Enter and select the conditions to search the user and click [Search]
The result is shown in [User List]
Click [View User Data] to display the bucket and object of user
5-1) Search a user
1
２
３
Click
Click
Click
25
Display the usage amount of Object Storage as a report
Click the [Usage] tab from the Object Storage control panel
Do not use (Current Billing Period) and (Previous Billing Period) in [Time Period]
6-1) Display the usage report
1
Click ２
Enter in [Operation] [Time Period] and [Report Granularity] of report displayed [Group ID] setting
and [User]
－Operation
Select the type of report to be displayed from downstream data transfer (Data Transfer-In-Bytes)
upstream data transfer (Data Transfer-In-Bytes) total capacity (Storage-Bytes) number of object
(Storage-Objects) number of all requests (All Requests) number of requests received (Get
Requests) number of requests sent (Put Requests) and number of requests deleted (Delete
Requests)
－Time Period
Select the period to be displayed from (Last week) (Last Month) and (Custom Period) When
selecting Custom Period set the period
－Report Granularity
Select the unit of report to be displayed from (Hours) (Days) (Months) and actual data (Raw)
－Group ID
Select the group ID in order to browse the report
－User
In order to browse a specific user enter the user name
26
Click [List] to display the result in the list format
You can download the same result in CSV format by clicking [Download CSV]
Click [Graph] to display the result in the graph format
6-1) Display the usage report
3
4
8
2-1) Start using the Storage service
５
3
After the Storage account is added log in the control panel with the appropriate user to
show the [Storage console] tab where you can move to the Storage console screen
The screen of adding Storage account completed pops up Click the [Close] button
Click [Submit] in order to make Object Storage available
４
Click
Click
9
In order to start the Storage console start it from the Cloudn portal or control panel (only in
West JapanUSA)
The Storage console starts on a new window
2-2) Start the Storage console
Log in the Cloudⁿ portal and click [Console] displayed by mouseover to [Object
Storage] icon which you start using in the region used
２
Click
1
Login method 1 【Start from Cloudⁿ portal】
10
The Storage console starts on a new window
2-2) Start the Storage console
２
Click the [Object Storage] button in the control panel
Click
1
Login method 2 【Start from control panel (only in West JapanUSA)】
11
The following operations are available on the Storage console
2-2) Start the Storage console
A user with the Domain User privilege created in West Japan and USA Data
Centers cannot display the [Management] and [Usage fee] tabs
[Management] tab () The following functions are available under this tab
- Manage the user
Enables to manage the user who uses Object Storage
[Explorer] tab The following functions are available under this tab
- Create and delete the bucket
Enables to create and delete the bucket on Object
Storage and set the access right
- Create and delete the object
Enables to create and delete the object for each bucket
and set the access right
[Account] tab The following functions are available under this tab
- Account profile
Enables to set the profile of account
- Security certificate
Enables to browse disable and delete the access key
and private key (secret key) required when using API and
create new keys
[Usage amount] tab () The following functions are available under this tab
- Usage amount report
Enables to make the list CSV and graph of current
usage amount of Object Storage (capacity transfer
amount number of requests etc) and browse the report
12
Close the Storage console
Click [Log out] on the upper right portion of the Storage console
After logout [Logout] is shown on the window and the screen is not closed
automatically Close the screen manually
2-3) Terminate the Storage console
1
Click
13
Create a new bucket
Enter the name of bucket which you want to create and then click [Create]
Click the [Data Explorer] tab from the Object Storage control panel
Confirm that the bucket created is shown in [Object and folder]
You must set the bucket name so that it is unique through system If you create
the bucket with the name used by other user an error is displayed
3-1) Create the bucket
1
Click
Click
２
3
14
Delete the bucket
Select the bucket which you want to delete from [Select a bucket] and click [Delete] to
delete it
You cannot delete the bucket if it has an object First delete the object in bucket
and then delete the bucket
When you click [Delete] it is immediately deleted Confirm carefully and then
delete it
3-2) Delete the bucket
Click the [Explorer] tab from the Object Storage control panel
1
２
Click
Click
15
Select the bucket for which you want to create an object When you want to create the
object in folder click the folder targeted in [Name]
In order to register the object one or more buckets are necessary
Upload the object (file) to the bucket
Click the [Explorer] tab from the Object Storage control panel
1
2
3-3) Upload the object (file)
Click
16
Select the file targeted from Reference and click [Upload the file]
Confirm that the object registered in [Name] is shown
The file size to upload the file from the Storage console is up to 2G due to
limitation of recommended browser FireFox If you desire to upload the file of more
than 2G use Object Storage API
3-3) Upload the object (file)
Click
3
3
In order to register the folder enter the folder name and click [Create the folder]
When uploading the HTML file it can work as a static contents server
17
Check the checkbox of object which you want to delete in [Select the bucket] and then click
[Delete]
The confirmation screen appears Click [OK] to complete deletion
Delete the object
3-4) Delete the object
Click the [Explorer] tab from the Object Storage control panel
1
Click
Click
２
3
Click
18
Perform the public setting of bucket and object The setting method is common to bucket and
object
When you want to publish the bucket select the target bucket in [Select the bucket] and
click [Access right]
When you want to publish the object check the checkbox of target object and click
[Access right]
When you add the user and group which can access to bucket or object click [Add]
Public and Storage_User listed in the first line mean below
- Public Published on Internet
- Storage_User Published to all customers who use Object Storage
3-5) Publish the bucket and object
Click the [Explorer] tab from the Object Storage control panel
1
２
３
Click
Click
Click
Click
19
When editing the public setting of usergroup edit the public setting by using the
checkbox of target user or group respectively By default all public settings are allowed
－Readable
Allows to read the bucket or object
－Writable (only for bucket)
Allows to write in the bucket
－ACP readable
Allows to read the access policy of bucket or object
－ACP writable
Allows to write in the access policy of bucket or object
When deleting the already existing usergroup check the checkbox of usergroup
which you want to delete and then click [Delete]
When you click [Delete] it is immediately deleted Confirm carefully and then
delete it
3-5) Publish the bucket and object
3
Click
4
If the public setting of bucket is different from object one object one is preferred
The published object is accessible at URL below
http[Bucket name]strcloudn-servicecom[(Folder name)Object name]
20
When setting the public URL for object click [Public URL access]
You cannot set the public URL for bucket
3-5) Publish the bucket and object
５
Set [Allow reading] [Issue the secure URL (https)] [Maximum number of downloading] and
[Expiration date] Set only [Allow reading] or both [Allow reading] and [Issue the secure URL
(https)] and click [Save] to generate the URL
－Allow reading
Allows the access from external to the object
－Issue the secure URL (https)
Allows the secure access from external to the object
－Maximum number of downloading
Sets the maximum number of downloading
－Expiration date
Sets the expiration date for access from external
6
Click
21
After editing all public settings click [Save] to terminate
3-5) Publish the bucket and object
７
Click
22
Set the account profile This setting is not mandatory
Enter the account profile information and click [Save]
ldquoAccount Profile was modified successfully appears on top of screen The setting of
account profile is completed
Click the [Account] tab from the Object Storage control panel
Click
4-1) Set the account profile
1
２
２
Click
23
Confirm the access key and private key (secret key) required when using API
Click the [Security Credentials] tab to display the access key ID If you want to display the
private key (Secret Key) click [View Secret Key] in the [Actions]
The private key (Secret Key) is displayed
Click the [Account] tab from the Object Storage control panel
xxxxxxxxx
xxxxxxxxx
4-2) Confirm the API key
1
2
３
Click Click
Click
24
Search a user
Click the [Admin] tab from the Object Storage control panel
Enter and select the conditions to search the user and click [Search]
The result is shown in [User List]
Click [View User Data] to display the bucket and object of user
5-1) Search a user
1
２
３
Click
Click
Click
25
Display the usage amount of Object Storage as a report
Click the [Usage] tab from the Object Storage control panel
Do not use (Current Billing Period) and (Previous Billing Period) in [Time Period]
6-1) Display the usage report
1
Click ２
Enter in [Operation] [Time Period] and [Report Granularity] of report displayed [Group ID] setting
and [User]
－Operation
Select the type of report to be displayed from downstream data transfer (Data Transfer-In-Bytes)
upstream data transfer (Data Transfer-In-Bytes) total capacity (Storage-Bytes) number of object
(Storage-Objects) number of all requests (All Requests) number of requests received (Get
Requests) number of requests sent (Put Requests) and number of requests deleted (Delete
Requests)
－Time Period
Select the period to be displayed from (Last week) (Last Month) and (Custom Period) When
selecting Custom Period set the period
－Report Granularity
Select the unit of report to be displayed from (Hours) (Days) (Months) and actual data (Raw)
－Group ID
Select the group ID in order to browse the report
－User
In order to browse a specific user enter the user name
26
Click [List] to display the result in the list format
You can download the same result in CSV format by clicking [Download CSV]
Click [Graph] to display the result in the graph format
6-1) Display the usage report
3
4
9
In order to start the Storage console start it from the Cloudn portal or control panel (only in
West JapanUSA)
The Storage console starts on a new window
2-2) Start the Storage console
Log in the Cloudⁿ portal and click [Console] displayed by mouseover to [Object
Storage] icon which you start using in the region used
２
Click
1
Login method 1 【Start from Cloudⁿ portal】
10
The Storage console starts on a new window
2-2) Start the Storage console
２
Click the [Object Storage] button in the control panel
Click
1
Login method 2 【Start from control panel (only in West JapanUSA)】
11
The following operations are available on the Storage console
2-2) Start the Storage console
A user with the Domain User privilege created in West Japan and USA Data
Centers cannot display the [Management] and [Usage fee] tabs
[Management] tab () The following functions are available under this tab
- Manage the user
Enables to manage the user who uses Object Storage
[Explorer] tab The following functions are available under this tab
- Create and delete the bucket
Enables to create and delete the bucket on Object
Storage and set the access right
- Create and delete the object
Enables to create and delete the object for each bucket
and set the access right
[Account] tab The following functions are available under this tab
- Account profile
Enables to set the profile of account
- Security certificate
Enables to browse disable and delete the access key
and private key (secret key) required when using API and
create new keys
[Usage amount] tab () The following functions are available under this tab
- Usage amount report
Enables to make the list CSV and graph of current
usage amount of Object Storage (capacity transfer
amount number of requests etc) and browse the report
12
Close the Storage console
Click [Log out] on the upper right portion of the Storage console
After logout [Logout] is shown on the window and the screen is not closed
automatically Close the screen manually
2-3) Terminate the Storage console
1
Click
13
Create a new bucket
Enter the name of bucket which you want to create and then click [Create]
Click the [Data Explorer] tab from the Object Storage control panel
Confirm that the bucket created is shown in [Object and folder]
You must set the bucket name so that it is unique through system If you create
the bucket with the name used by other user an error is displayed
3-1) Create the bucket
1
Click
Click
２
3
14
Delete the bucket
Select the bucket which you want to delete from [Select a bucket] and click [Delete] to
delete it
You cannot delete the bucket if it has an object First delete the object in bucket
and then delete the bucket
When you click [Delete] it is immediately deleted Confirm carefully and then
delete it
3-2) Delete the bucket
Click the [Explorer] tab from the Object Storage control panel
1
２
Click
Click
15
Select the bucket for which you want to create an object When you want to create the
object in folder click the folder targeted in [Name]
In order to register the object one or more buckets are necessary
Upload the object (file) to the bucket
Click the [Explorer] tab from the Object Storage control panel
1
2
3-3) Upload the object (file)
Click
16
Select the file targeted from Reference and click [Upload the file]
Confirm that the object registered in [Name] is shown
The file size to upload the file from the Storage console is up to 2G due to
limitation of recommended browser FireFox If you desire to upload the file of more
than 2G use Object Storage API
3-3) Upload the object (file)
Click
3
3
In order to register the folder enter the folder name and click [Create the folder]
When uploading the HTML file it can work as a static contents server
17
Check the checkbox of object which you want to delete in [Select the bucket] and then click
[Delete]
The confirmation screen appears Click [OK] to complete deletion
Delete the object
3-4) Delete the object
Click the [Explorer] tab from the Object Storage control panel
1
Click
Click
２
3
Click
18
Perform the public setting of bucket and object The setting method is common to bucket and
object
When you want to publish the bucket select the target bucket in [Select the bucket] and
click [Access right]
When you want to publish the object check the checkbox of target object and click
[Access right]
When you add the user and group which can access to bucket or object click [Add]
Public and Storage_User listed in the first line mean below
- Public Published on Internet
- Storage_User Published to all customers who use Object Storage
3-5) Publish the bucket and object
Click the [Explorer] tab from the Object Storage control panel
1
２
３
Click
Click
Click
Click
19
When editing the public setting of usergroup edit the public setting by using the
checkbox of target user or group respectively By default all public settings are allowed
－Readable
Allows to read the bucket or object
－Writable (only for bucket)
Allows to write in the bucket
－ACP readable
Allows to read the access policy of bucket or object
－ACP writable
Allows to write in the access policy of bucket or object
When deleting the already existing usergroup check the checkbox of usergroup
which you want to delete and then click [Delete]
When you click [Delete] it is immediately deleted Confirm carefully and then
delete it
3-5) Publish the bucket and object
3
Click
4
If the public setting of bucket is different from object one object one is preferred
The published object is accessible at URL below
http[Bucket name]strcloudn-servicecom[(Folder name)Object name]
20
When setting the public URL for object click [Public URL access]
You cannot set the public URL for bucket
3-5) Publish the bucket and object
５
Set [Allow reading] [Issue the secure URL (https)] [Maximum number of downloading] and
[Expiration date] Set only [Allow reading] or both [Allow reading] and [Issue the secure URL
(https)] and click [Save] to generate the URL
－Allow reading
Allows the access from external to the object
－Issue the secure URL (https)
Allows the secure access from external to the object
－Maximum number of downloading
Sets the maximum number of downloading
－Expiration date
Sets the expiration date for access from external
6
Click
21
After editing all public settings click [Save] to terminate
3-5) Publish the bucket and object
７
Click
22
Set the account profile This setting is not mandatory
Enter the account profile information and click [Save]
ldquoAccount Profile was modified successfully appears on top of screen The setting of
account profile is completed
Click the [Account] tab from the Object Storage control panel
Click
4-1) Set the account profile
1
２
２
Click
23
Confirm the access key and private key (secret key) required when using API
Click the [Security Credentials] tab to display the access key ID If you want to display the
private key (Secret Key) click [View Secret Key] in the [Actions]
The private key (Secret Key) is displayed
Click the [Account] tab from the Object Storage control panel
xxxxxxxxx
xxxxxxxxx
4-2) Confirm the API key
1
2
３
Click Click
Click
24
Search a user
Click the [Admin] tab from the Object Storage control panel
Enter and select the conditions to search the user and click [Search]
The result is shown in [User List]
Click [View User Data] to display the bucket and object of user
5-1) Search a user
1
２
３
Click
Click
Click
25
Display the usage amount of Object Storage as a report
Click the [Usage] tab from the Object Storage control panel
Do not use (Current Billing Period) and (Previous Billing Period) in [Time Period]
6-1) Display the usage report
1
Click ２
Enter in [Operation] [Time Period] and [Report Granularity] of report displayed [Group ID] setting
and [User]
－Operation
Select the type of report to be displayed from downstream data transfer (Data Transfer-In-Bytes)
upstream data transfer (Data Transfer-In-Bytes) total capacity (Storage-Bytes) number of object
(Storage-Objects) number of all requests (All Requests) number of requests received (Get
Requests) number of requests sent (Put Requests) and number of requests deleted (Delete
Requests)
－Time Period
Select the period to be displayed from (Last week) (Last Month) and (Custom Period) When
selecting Custom Period set the period
－Report Granularity
Select the unit of report to be displayed from (Hours) (Days) (Months) and actual data (Raw)
－Group ID
Select the group ID in order to browse the report
－User
In order to browse a specific user enter the user name
26
Click [List] to display the result in the list format
You can download the same result in CSV format by clicking [Download CSV]
Click [Graph] to display the result in the graph format
6-1) Display the usage report
3
4
10
The Storage console starts on a new window
2-2) Start the Storage console
２
Click the [Object Storage] button in the control panel
Click
1
Login method 2 【Start from control panel (only in West JapanUSA)】
11
The following operations are available on the Storage console
2-2) Start the Storage console
A user with the Domain User privilege created in West Japan and USA Data
Centers cannot display the [Management] and [Usage fee] tabs
[Management] tab () The following functions are available under this tab
- Manage the user
Enables to manage the user who uses Object Storage
[Explorer] tab The following functions are available under this tab
- Create and delete the bucket
Enables to create and delete the bucket on Object
Storage and set the access right
- Create and delete the object
Enables to create and delete the object for each bucket
and set the access right
[Account] tab The following functions are available under this tab
- Account profile
Enables to set the profile of account
- Security certificate
Enables to browse disable and delete the access key
and private key (secret key) required when using API and
create new keys
[Usage amount] tab () The following functions are available under this tab
- Usage amount report
Enables to make the list CSV and graph of current
usage amount of Object Storage (capacity transfer
amount number of requests etc) and browse the report
12
Close the Storage console
Click [Log out] on the upper right portion of the Storage console
After logout [Logout] is shown on the window and the screen is not closed
automatically Close the screen manually
2-3) Terminate the Storage console
1
Click
13
Create a new bucket
Enter the name of bucket which you want to create and then click [Create]
Click the [Data Explorer] tab from the Object Storage control panel
Confirm that the bucket created is shown in [Object and folder]
You must set the bucket name so that it is unique through system If you create
the bucket with the name used by other user an error is displayed
3-1) Create the bucket
1
Click
Click
２
3
14
Delete the bucket
Select the bucket which you want to delete from [Select a bucket] and click [Delete] to
delete it
You cannot delete the bucket if it has an object First delete the object in bucket
and then delete the bucket
When you click [Delete] it is immediately deleted Confirm carefully and then
delete it
3-2) Delete the bucket
Click the [Explorer] tab from the Object Storage control panel
1
２
Click
Click
15
Select the bucket for which you want to create an object When you want to create the
object in folder click the folder targeted in [Name]
In order to register the object one or more buckets are necessary
Upload the object (file) to the bucket
Click the [Explorer] tab from the Object Storage control panel
1
2
3-3) Upload the object (file)
Click
16
Select the file targeted from Reference and click [Upload the file]
Confirm that the object registered in [Name] is shown
The file size to upload the file from the Storage console is up to 2G due to
limitation of recommended browser FireFox If you desire to upload the file of more
than 2G use Object Storage API
3-3) Upload the object (file)
Click
3
3
In order to register the folder enter the folder name and click [Create the folder]
When uploading the HTML file it can work as a static contents server
17
Check the checkbox of object which you want to delete in [Select the bucket] and then click
[Delete]
The confirmation screen appears Click [OK] to complete deletion
Delete the object
3-4) Delete the object
Click the [Explorer] tab from the Object Storage control panel
1
Click
Click
２
3
Click
18
Perform the public setting of bucket and object The setting method is common to bucket and
object
When you want to publish the bucket select the target bucket in [Select the bucket] and
click [Access right]
When you want to publish the object check the checkbox of target object and click
[Access right]
When you add the user and group which can access to bucket or object click [Add]
Public and Storage_User listed in the first line mean below
- Public Published on Internet
- Storage_User Published to all customers who use Object Storage
3-5) Publish the bucket and object
Click the [Explorer] tab from the Object Storage control panel
1
２
３
Click
Click
Click
Click
19
When editing the public setting of usergroup edit the public setting by using the
checkbox of target user or group respectively By default all public settings are allowed
－Readable
Allows to read the bucket or object
－Writable (only for bucket)
Allows to write in the bucket
－ACP readable
Allows to read the access policy of bucket or object
－ACP writable
Allows to write in the access policy of bucket or object
When deleting the already existing usergroup check the checkbox of usergroup
which you want to delete and then click [Delete]
When you click [Delete] it is immediately deleted Confirm carefully and then
delete it
3-5) Publish the bucket and object
3
Click
4
If the public setting of bucket is different from object one object one is preferred
The published object is accessible at URL below
http[Bucket name]strcloudn-servicecom[(Folder name)Object name]
20
When setting the public URL for object click [Public URL access]
You cannot set the public URL for bucket
3-5) Publish the bucket and object
５
Set [Allow reading] [Issue the secure URL (https)] [Maximum number of downloading] and
[Expiration date] Set only [Allow reading] or both [Allow reading] and [Issue the secure URL
(https)] and click [Save] to generate the URL
－Allow reading
Allows the access from external to the object
－Issue the secure URL (https)
Allows the secure access from external to the object
－Maximum number of downloading
Sets the maximum number of downloading
－Expiration date
Sets the expiration date for access from external
6
Click
21
After editing all public settings click [Save] to terminate
3-5) Publish the bucket and object
７
Click
22
Set the account profile This setting is not mandatory
Enter the account profile information and click [Save]
ldquoAccount Profile was modified successfully appears on top of screen The setting of
account profile is completed
Click the [Account] tab from the Object Storage control panel
Click
4-1) Set the account profile
1
２
２
Click
23
Confirm the access key and private key (secret key) required when using API
Click the [Security Credentials] tab to display the access key ID If you want to display the
private key (Secret Key) click [View Secret Key] in the [Actions]
The private key (Secret Key) is displayed
Click the [Account] tab from the Object Storage control panel
xxxxxxxxx
xxxxxxxxx
4-2) Confirm the API key
1
2
３
Click Click
Click
24
Search a user
Click the [Admin] tab from the Object Storage control panel
Enter and select the conditions to search the user and click [Search]
The result is shown in [User List]
Click [View User Data] to display the bucket and object of user
5-1) Search a user
1
２
３
Click
Click
Click
25
Display the usage amount of Object Storage as a report
Click the [Usage] tab from the Object Storage control panel
Do not use (Current Billing Period) and (Previous Billing Period) in [Time Period]
6-1) Display the usage report
1
Click ２
Enter in [Operation] [Time Period] and [Report Granularity] of report displayed [Group ID] setting
and [User]
－Operation
Select the type of report to be displayed from downstream data transfer (Data Transfer-In-Bytes)
upstream data transfer (Data Transfer-In-Bytes) total capacity (Storage-Bytes) number of object
(Storage-Objects) number of all requests (All Requests) number of requests received (Get
Requests) number of requests sent (Put Requests) and number of requests deleted (Delete
Requests)
－Time Period
Select the period to be displayed from (Last week) (Last Month) and (Custom Period) When
selecting Custom Period set the period
－Report Granularity
Select the unit of report to be displayed from (Hours) (Days) (Months) and actual data (Raw)
－Group ID
Select the group ID in order to browse the report
－User
In order to browse a specific user enter the user name
26
Click [List] to display the result in the list format
You can download the same result in CSV format by clicking [Download CSV]
Click [Graph] to display the result in the graph format
6-1) Display the usage report
3
4
11
The following operations are available on the Storage console
2-2) Start the Storage console
A user with the Domain User privilege created in West Japan and USA Data
Centers cannot display the [Management] and [Usage fee] tabs
[Management] tab () The following functions are available under this tab
- Manage the user
Enables to manage the user who uses Object Storage
[Explorer] tab The following functions are available under this tab
- Create and delete the bucket
Enables to create and delete the bucket on Object
Storage and set the access right
- Create and delete the object
Enables to create and delete the object for each bucket
and set the access right
[Account] tab The following functions are available under this tab
- Account profile
Enables to set the profile of account
- Security certificate
Enables to browse disable and delete the access key
and private key (secret key) required when using API and
create new keys
[Usage amount] tab () The following functions are available under this tab
- Usage amount report
Enables to make the list CSV and graph of current
usage amount of Object Storage (capacity transfer
amount number of requests etc) and browse the report
12
Close the Storage console
Click [Log out] on the upper right portion of the Storage console
After logout [Logout] is shown on the window and the screen is not closed
automatically Close the screen manually
2-3) Terminate the Storage console
1
Click
13
Create a new bucket
Enter the name of bucket which you want to create and then click [Create]
Click the [Data Explorer] tab from the Object Storage control panel
Confirm that the bucket created is shown in [Object and folder]
You must set the bucket name so that it is unique through system If you create
the bucket with the name used by other user an error is displayed
3-1) Create the bucket
1
Click
Click
２
3
14
Delete the bucket
Select the bucket which you want to delete from [Select a bucket] and click [Delete] to
delete it
You cannot delete the bucket if it has an object First delete the object in bucket
and then delete the bucket
When you click [Delete] it is immediately deleted Confirm carefully and then
delete it
3-2) Delete the bucket
Click the [Explorer] tab from the Object Storage control panel
1
２
Click
Click
15
Select the bucket for which you want to create an object When you want to create the
object in folder click the folder targeted in [Name]
In order to register the object one or more buckets are necessary
Upload the object (file) to the bucket
Click the [Explorer] tab from the Object Storage control panel
1
2
3-3) Upload the object (file)
Click
16
Select the file targeted from Reference and click [Upload the file]
Confirm that the object registered in [Name] is shown
The file size to upload the file from the Storage console is up to 2G due to
limitation of recommended browser FireFox If you desire to upload the file of more
than 2G use Object Storage API
3-3) Upload the object (file)
Click
3
3
In order to register the folder enter the folder name and click [Create the folder]
When uploading the HTML file it can work as a static contents server
17
Check the checkbox of object which you want to delete in [Select the bucket] and then click
[Delete]
The confirmation screen appears Click [OK] to complete deletion
Delete the object
3-4) Delete the object
Click the [Explorer] tab from the Object Storage control panel
1
Click
Click
２
3
Click
18
Perform the public setting of bucket and object The setting method is common to bucket and
object
When you want to publish the bucket select the target bucket in [Select the bucket] and
click [Access right]
When you want to publish the object check the checkbox of target object and click
[Access right]
When you add the user and group which can access to bucket or object click [Add]
Public and Storage_User listed in the first line mean below
- Public Published on Internet
- Storage_User Published to all customers who use Object Storage
3-5) Publish the bucket and object
Click the [Explorer] tab from the Object Storage control panel
1
２
３
Click
Click
Click
Click
19
When editing the public setting of usergroup edit the public setting by using the
checkbox of target user or group respectively By default all public settings are allowed
－Readable
Allows to read the bucket or object
－Writable (only for bucket)
Allows to write in the bucket
－ACP readable
Allows to read the access policy of bucket or object
－ACP writable
Allows to write in the access policy of bucket or object
When deleting the already existing usergroup check the checkbox of usergroup
which you want to delete and then click [Delete]
When you click [Delete] it is immediately deleted Confirm carefully and then
delete it
3-5) Publish the bucket and object
3
Click
4
If the public setting of bucket is different from object one object one is preferred
The published object is accessible at URL below
http[Bucket name]strcloudn-servicecom[(Folder name)Object name]
20
When setting the public URL for object click [Public URL access]
You cannot set the public URL for bucket
3-5) Publish the bucket and object
５
Set [Allow reading] [Issue the secure URL (https)] [Maximum number of downloading] and
[Expiration date] Set only [Allow reading] or both [Allow reading] and [Issue the secure URL
(https)] and click [Save] to generate the URL
－Allow reading
Allows the access from external to the object
－Issue the secure URL (https)
Allows the secure access from external to the object
－Maximum number of downloading
Sets the maximum number of downloading
－Expiration date
Sets the expiration date for access from external
6
Click
21
After editing all public settings click [Save] to terminate
3-5) Publish the bucket and object
７
Click
22
Set the account profile This setting is not mandatory
Enter the account profile information and click [Save]
ldquoAccount Profile was modified successfully appears on top of screen The setting of
account profile is completed
Click the [Account] tab from the Object Storage control panel
Click
4-1) Set the account profile
1
２
２
Click
23
Confirm the access key and private key (secret key) required when using API
Click the [Security Credentials] tab to display the access key ID If you want to display the
private key (Secret Key) click [View Secret Key] in the [Actions]
The private key (Secret Key) is displayed
Click the [Account] tab from the Object Storage control panel
xxxxxxxxx
xxxxxxxxx
4-2) Confirm the API key
1
2
３
Click Click
Click
24
Search a user
Click the [Admin] tab from the Object Storage control panel
Enter and select the conditions to search the user and click [Search]
The result is shown in [User List]
Click [View User Data] to display the bucket and object of user
5-1) Search a user
1
２
３
Click
Click
Click
25
Display the usage amount of Object Storage as a report
Click the [Usage] tab from the Object Storage control panel
Do not use (Current Billing Period) and (Previous Billing Period) in [Time Period]
6-1) Display the usage report
1
Click ２
Enter in [Operation] [Time Period] and [Report Granularity] of report displayed [Group ID] setting
and [User]
－Operation
Select the type of report to be displayed from downstream data transfer (Data Transfer-In-Bytes)
upstream data transfer (Data Transfer-In-Bytes) total capacity (Storage-Bytes) number of object
(Storage-Objects) number of all requests (All Requests) number of requests received (Get
Requests) number of requests sent (Put Requests) and number of requests deleted (Delete
Requests)
－Time Period
Select the period to be displayed from (Last week) (Last Month) and (Custom Period) When
selecting Custom Period set the period
－Report Granularity
Select the unit of report to be displayed from (Hours) (Days) (Months) and actual data (Raw)
－Group ID
Select the group ID in order to browse the report
－User
In order to browse a specific user enter the user name
26
Click [List] to display the result in the list format
You can download the same result in CSV format by clicking [Download CSV]
Click [Graph] to display the result in the graph format
6-1) Display the usage report
3
4
12
Close the Storage console
Click [Log out] on the upper right portion of the Storage console
After logout [Logout] is shown on the window and the screen is not closed
automatically Close the screen manually
2-3) Terminate the Storage console
1
Click
13
Create a new bucket
Enter the name of bucket which you want to create and then click [Create]
Click the [Data Explorer] tab from the Object Storage control panel
Confirm that the bucket created is shown in [Object and folder]
You must set the bucket name so that it is unique through system If you create
the bucket with the name used by other user an error is displayed
3-1) Create the bucket
1
Click
Click
２
3
14
Delete the bucket
Select the bucket which you want to delete from [Select a bucket] and click [Delete] to
delete it
You cannot delete the bucket if it has an object First delete the object in bucket
and then delete the bucket
When you click [Delete] it is immediately deleted Confirm carefully and then
delete it
3-2) Delete the bucket
Click the [Explorer] tab from the Object Storage control panel
1
２
Click
Click
15
Select the bucket for which you want to create an object When you want to create the
object in folder click the folder targeted in [Name]
In order to register the object one or more buckets are necessary
Upload the object (file) to the bucket
Click the [Explorer] tab from the Object Storage control panel
1
2
3-3) Upload the object (file)
Click
16
Select the file targeted from Reference and click [Upload the file]
Confirm that the object registered in [Name] is shown
The file size to upload the file from the Storage console is up to 2G due to
limitation of recommended browser FireFox If you desire to upload the file of more
than 2G use Object Storage API
3-3) Upload the object (file)
Click
3
3
In order to register the folder enter the folder name and click [Create the folder]
When uploading the HTML file it can work as a static contents server
17
Check the checkbox of object which you want to delete in [Select the bucket] and then click
[Delete]
The confirmation screen appears Click [OK] to complete deletion
Delete the object
3-4) Delete the object
Click the [Explorer] tab from the Object Storage control panel
1
Click
Click
２
3
Click
18
Perform the public setting of bucket and object The setting method is common to bucket and
object
When you want to publish the bucket select the target bucket in [Select the bucket] and
click [Access right]
When you want to publish the object check the checkbox of target object and click
[Access right]
When you add the user and group which can access to bucket or object click [Add]
Public and Storage_User listed in the first line mean below
- Public Published on Internet
- Storage_User Published to all customers who use Object Storage
3-5) Publish the bucket and object
Click the [Explorer] tab from the Object Storage control panel
1
２
３
Click
Click
Click
Click
19
When editing the public setting of usergroup edit the public setting by using the
checkbox of target user or group respectively By default all public settings are allowed
－Readable
Allows to read the bucket or object
－Writable (only for bucket)
Allows to write in the bucket
－ACP readable
Allows to read the access policy of bucket or object
－ACP writable
Allows to write in the access policy of bucket or object
When deleting the already existing usergroup check the checkbox of usergroup
which you want to delete and then click [Delete]
When you click [Delete] it is immediately deleted Confirm carefully and then
delete it
3-5) Publish the bucket and object
3
Click
4
If the public setting of bucket is different from object one object one is preferred
The published object is accessible at URL below
http[Bucket name]strcloudn-servicecom[(Folder name)Object name]
20
When setting the public URL for object click [Public URL access]
You cannot set the public URL for bucket
3-5) Publish the bucket and object
５
Set [Allow reading] [Issue the secure URL (https)] [Maximum number of downloading] and
[Expiration date] Set only [Allow reading] or both [Allow reading] and [Issue the secure URL
(https)] and click [Save] to generate the URL
－Allow reading
Allows the access from external to the object
－Issue the secure URL (https)
Allows the secure access from external to the object
－Maximum number of downloading
Sets the maximum number of downloading
－Expiration date
Sets the expiration date for access from external
6
Click
21
After editing all public settings click [Save] to terminate
3-5) Publish the bucket and object
７
Click
22
Set the account profile This setting is not mandatory
Enter the account profile information and click [Save]
ldquoAccount Profile was modified successfully appears on top of screen The setting of
account profile is completed
Click the [Account] tab from the Object Storage control panel
Click
4-1) Set the account profile
1
２
２
Click
23
Confirm the access key and private key (secret key) required when using API
Click the [Security Credentials] tab to display the access key ID If you want to display the
private key (Secret Key) click [View Secret Key] in the [Actions]
The private key (Secret Key) is displayed
Click the [Account] tab from the Object Storage control panel
xxxxxxxxx
xxxxxxxxx
4-2) Confirm the API key
1
2
３
Click Click
Click
24
Search a user
Click the [Admin] tab from the Object Storage control panel
Enter and select the conditions to search the user and click [Search]
The result is shown in [User List]
Click [View User Data] to display the bucket and object of user
5-1) Search a user
1
２
３
Click
Click
Click
25
Display the usage amount of Object Storage as a report
Click the [Usage] tab from the Object Storage control panel
Do not use (Current Billing Period) and (Previous Billing Period) in [Time Period]
6-1) Display the usage report
1
Click ２
Enter in [Operation] [Time Period] and [Report Granularity] of report displayed [Group ID] setting
and [User]
－Operation
Select the type of report to be displayed from downstream data transfer (Data Transfer-In-Bytes)
upstream data transfer (Data Transfer-In-Bytes) total capacity (Storage-Bytes) number of object
(Storage-Objects) number of all requests (All Requests) number of requests received (Get
Requests) number of requests sent (Put Requests) and number of requests deleted (Delete
Requests)
－Time Period
Select the period to be displayed from (Last week) (Last Month) and (Custom Period) When
selecting Custom Period set the period
－Report Granularity
Select the unit of report to be displayed from (Hours) (Days) (Months) and actual data (Raw)
－Group ID
Select the group ID in order to browse the report
－User
In order to browse a specific user enter the user name
26
Click [List] to display the result in the list format
You can download the same result in CSV format by clicking [Download CSV]
Click [Graph] to display the result in the graph format
6-1) Display the usage report
3
4
13
Create a new bucket
Enter the name of bucket which you want to create and then click [Create]
Click the [Data Explorer] tab from the Object Storage control panel
Confirm that the bucket created is shown in [Object and folder]
You must set the bucket name so that it is unique through system If you create
the bucket with the name used by other user an error is displayed
3-1) Create the bucket
1
Click
Click
２
3
14
Delete the bucket
Select the bucket which you want to delete from [Select a bucket] and click [Delete] to
delete it
You cannot delete the bucket if it has an object First delete the object in bucket
and then delete the bucket
When you click [Delete] it is immediately deleted Confirm carefully and then
delete it
3-2) Delete the bucket
Click the [Explorer] tab from the Object Storage control panel
1
２
Click
Click
15
Select the bucket for which you want to create an object When you want to create the
object in folder click the folder targeted in [Name]
In order to register the object one or more buckets are necessary
Upload the object (file) to the bucket
Click the [Explorer] tab from the Object Storage control panel
1
2
3-3) Upload the object (file)
Click
16
Select the file targeted from Reference and click [Upload the file]
Confirm that the object registered in [Name] is shown
The file size to upload the file from the Storage console is up to 2G due to
limitation of recommended browser FireFox If you desire to upload the file of more
than 2G use Object Storage API
3-3) Upload the object (file)
Click
3
3
In order to register the folder enter the folder name and click [Create the folder]
When uploading the HTML file it can work as a static contents server
17
Check the checkbox of object which you want to delete in [Select the bucket] and then click
[Delete]
The confirmation screen appears Click [OK] to complete deletion
Delete the object
3-4) Delete the object
Click the [Explorer] tab from the Object Storage control panel
1
Click
Click
２
3
Click
18
Perform the public setting of bucket and object The setting method is common to bucket and
object
When you want to publish the bucket select the target bucket in [Select the bucket] and
click [Access right]
When you want to publish the object check the checkbox of target object and click
[Access right]
When you add the user and group which can access to bucket or object click [Add]
Public and Storage_User listed in the first line mean below
- Public Published on Internet
- Storage_User Published to all customers who use Object Storage
3-5) Publish the bucket and object
Click the [Explorer] tab from the Object Storage control panel
1
２
３
Click
Click
Click
Click
19
When editing the public setting of usergroup edit the public setting by using the
checkbox of target user or group respectively By default all public settings are allowed
－Readable
Allows to read the bucket or object
－Writable (only for bucket)
Allows to write in the bucket
－ACP readable
Allows to read the access policy of bucket or object
－ACP writable
Allows to write in the access policy of bucket or object
When deleting the already existing usergroup check the checkbox of usergroup
which you want to delete and then click [Delete]
When you click [Delete] it is immediately deleted Confirm carefully and then
delete it
3-5) Publish the bucket and object
3
Click
4
If the public setting of bucket is different from object one object one is preferred
The published object is accessible at URL below
http[Bucket name]strcloudn-servicecom[(Folder name)Object name]
20
When setting the public URL for object click [Public URL access]
You cannot set the public URL for bucket
3-5) Publish the bucket and object
５
Set [Allow reading] [Issue the secure URL (https)] [Maximum number of downloading] and
[Expiration date] Set only [Allow reading] or both [Allow reading] and [Issue the secure URL
(https)] and click [Save] to generate the URL
－Allow reading
Allows the access from external to the object
－Issue the secure URL (https)
Allows the secure access from external to the object
－Maximum number of downloading
Sets the maximum number of downloading
－Expiration date
Sets the expiration date for access from external
6
Click
21
After editing all public settings click [Save] to terminate
3-5) Publish the bucket and object
７
Click
22
Set the account profile This setting is not mandatory
Enter the account profile information and click [Save]
ldquoAccount Profile was modified successfully appears on top of screen The setting of
account profile is completed
Click the [Account] tab from the Object Storage control panel
Click
4-1) Set the account profile
1
２
２
Click
23
Confirm the access key and private key (secret key) required when using API
Click the [Security Credentials] tab to display the access key ID If you want to display the
private key (Secret Key) click [View Secret Key] in the [Actions]
The private key (Secret Key) is displayed
Click the [Account] tab from the Object Storage control panel
xxxxxxxxx
xxxxxxxxx
4-2) Confirm the API key
1
2
３
Click Click
Click
24
Search a user
Click the [Admin] tab from the Object Storage control panel
Enter and select the conditions to search the user and click [Search]
The result is shown in [User List]
Click [View User Data] to display the bucket and object of user
5-1) Search a user
1
２
３
Click
Click
Click
25
Display the usage amount of Object Storage as a report
Click the [Usage] tab from the Object Storage control panel
Do not use (Current Billing Period) and (Previous Billing Period) in [Time Period]
6-1) Display the usage report
1
Click ２
Enter in [Operation] [Time Period] and [Report Granularity] of report displayed [Group ID] setting
and [User]
－Operation
Select the type of report to be displayed from downstream data transfer (Data Transfer-In-Bytes)
upstream data transfer (Data Transfer-In-Bytes) total capacity (Storage-Bytes) number of object
(Storage-Objects) number of all requests (All Requests) number of requests received (Get
Requests) number of requests sent (Put Requests) and number of requests deleted (Delete
Requests)
－Time Period
Select the period to be displayed from (Last week) (Last Month) and (Custom Period) When
selecting Custom Period set the period
－Report Granularity
Select the unit of report to be displayed from (Hours) (Days) (Months) and actual data (Raw)
－Group ID
Select the group ID in order to browse the report
－User
In order to browse a specific user enter the user name
26
Click [List] to display the result in the list format
You can download the same result in CSV format by clicking [Download CSV]
Click [Graph] to display the result in the graph format
6-1) Display the usage report
3
4
14
Delete the bucket
Select the bucket which you want to delete from [Select a bucket] and click [Delete] to
delete it
You cannot delete the bucket if it has an object First delete the object in bucket
and then delete the bucket
When you click [Delete] it is immediately deleted Confirm carefully and then
delete it
3-2) Delete the bucket
Click the [Explorer] tab from the Object Storage control panel
1
２
Click
Click
15
Select the bucket for which you want to create an object When you want to create the
object in folder click the folder targeted in [Name]
In order to register the object one or more buckets are necessary
Upload the object (file) to the bucket
Click the [Explorer] tab from the Object Storage control panel
1
2
3-3) Upload the object (file)
Click
16
Select the file targeted from Reference and click [Upload the file]
Confirm that the object registered in [Name] is shown
The file size to upload the file from the Storage console is up to 2G due to
limitation of recommended browser FireFox If you desire to upload the file of more
than 2G use Object Storage API
3-3) Upload the object (file)
Click
3
3
In order to register the folder enter the folder name and click [Create the folder]
When uploading the HTML file it can work as a static contents server
17
Check the checkbox of object which you want to delete in [Select the bucket] and then click
[Delete]
The confirmation screen appears Click [OK] to complete deletion
Delete the object
3-4) Delete the object
Click the [Explorer] tab from the Object Storage control panel
1
Click
Click
２
3
Click
18
Perform the public setting of bucket and object The setting method is common to bucket and
object
When you want to publish the bucket select the target bucket in [Select the bucket] and
click [Access right]
When you want to publish the object check the checkbox of target object and click
[Access right]
When you add the user and group which can access to bucket or object click [Add]
Public and Storage_User listed in the first line mean below
- Public Published on Internet
- Storage_User Published to all customers who use Object Storage
3-5) Publish the bucket and object
Click the [Explorer] tab from the Object Storage control panel
1
２
３
Click
Click
Click
Click
19
When editing the public setting of usergroup edit the public setting by using the
checkbox of target user or group respectively By default all public settings are allowed
－Readable
Allows to read the bucket or object
－Writable (only for bucket)
Allows to write in the bucket
－ACP readable
Allows to read the access policy of bucket or object
－ACP writable
Allows to write in the access policy of bucket or object
When deleting the already existing usergroup check the checkbox of usergroup
which you want to delete and then click [Delete]
When you click [Delete] it is immediately deleted Confirm carefully and then
delete it
3-5) Publish the bucket and object
3
Click
4
If the public setting of bucket is different from object one object one is preferred
The published object is accessible at URL below
http[Bucket name]strcloudn-servicecom[(Folder name)Object name]
20
When setting the public URL for object click [Public URL access]
You cannot set the public URL for bucket
3-5) Publish the bucket and object
５
Set [Allow reading] [Issue the secure URL (https)] [Maximum number of downloading] and
[Expiration date] Set only [Allow reading] or both [Allow reading] and [Issue the secure URL
(https)] and click [Save] to generate the URL
－Allow reading
Allows the access from external to the object
－Issue the secure URL (https)
Allows the secure access from external to the object
－Maximum number of downloading
Sets the maximum number of downloading
－Expiration date
Sets the expiration date for access from external
6
Click
21
After editing all public settings click [Save] to terminate
3-5) Publish the bucket and object
７
Click
22
Set the account profile This setting is not mandatory
Enter the account profile information and click [Save]
ldquoAccount Profile was modified successfully appears on top of screen The setting of
account profile is completed
Click the [Account] tab from the Object Storage control panel
Click
4-1) Set the account profile
1
２
２
Click
23
Confirm the access key and private key (secret key) required when using API
Click the [Security Credentials] tab to display the access key ID If you want to display the
private key (Secret Key) click [View Secret Key] in the [Actions]
The private key (Secret Key) is displayed
Click the [Account] tab from the Object Storage control panel
xxxxxxxxx
xxxxxxxxx
4-2) Confirm the API key
1
2
３
Click Click
Click
24
Search a user
Click the [Admin] tab from the Object Storage control panel
Enter and select the conditions to search the user and click [Search]
The result is shown in [User List]
Click [View User Data] to display the bucket and object of user
5-1) Search a user
1
２
３
Click
Click
Click
25
Display the usage amount of Object Storage as a report
Click the [Usage] tab from the Object Storage control panel
Do not use (Current Billing Period) and (Previous Billing Period) in [Time Period]
6-1) Display the usage report
1
Click ２
Enter in [Operation] [Time Period] and [Report Granularity] of report displayed [Group ID] setting
and [User]
－Operation
Select the type of report to be displayed from downstream data transfer (Data Transfer-In-Bytes)
upstream data transfer (Data Transfer-In-Bytes) total capacity (Storage-Bytes) number of object
(Storage-Objects) number of all requests (All Requests) number of requests received (Get
Requests) number of requests sent (Put Requests) and number of requests deleted (Delete
Requests)
－Time Period
Select the period to be displayed from (Last week) (Last Month) and (Custom Period) When
selecting Custom Period set the period
－Report Granularity
Select the unit of report to be displayed from (Hours) (Days) (Months) and actual data (Raw)
－Group ID
Select the group ID in order to browse the report
－User
In order to browse a specific user enter the user name
26
Click [List] to display the result in the list format
You can download the same result in CSV format by clicking [Download CSV]
Click [Graph] to display the result in the graph format
6-1) Display the usage report
3
4
15
Select the bucket for which you want to create an object When you want to create the
object in folder click the folder targeted in [Name]
In order to register the object one or more buckets are necessary
Upload the object (file) to the bucket
Click the [Explorer] tab from the Object Storage control panel
1
2
3-3) Upload the object (file)
Click
16
Select the file targeted from Reference and click [Upload the file]
Confirm that the object registered in [Name] is shown
The file size to upload the file from the Storage console is up to 2G due to
limitation of recommended browser FireFox If you desire to upload the file of more
than 2G use Object Storage API
3-3) Upload the object (file)
Click
3
3
In order to register the folder enter the folder name and click [Create the folder]
When uploading the HTML file it can work as a static contents server
17
Check the checkbox of object which you want to delete in [Select the bucket] and then click
[Delete]
The confirmation screen appears Click [OK] to complete deletion
Delete the object
3-4) Delete the object
Click the [Explorer] tab from the Object Storage control panel
1
Click
Click
２
3
Click
18
Perform the public setting of bucket and object The setting method is common to bucket and
object
When you want to publish the bucket select the target bucket in [Select the bucket] and
click [Access right]
When you want to publish the object check the checkbox of target object and click
[Access right]
When you add the user and group which can access to bucket or object click [Add]
Public and Storage_User listed in the first line mean below
- Public Published on Internet
- Storage_User Published to all customers who use Object Storage
3-5) Publish the bucket and object
Click the [Explorer] tab from the Object Storage control panel
1
２
３
Click
Click
Click
Click
19
When editing the public setting of usergroup edit the public setting by using the
checkbox of target user or group respectively By default all public settings are allowed
－Readable
Allows to read the bucket or object
－Writable (only for bucket)
Allows to write in the bucket
－ACP readable
Allows to read the access policy of bucket or object
－ACP writable
Allows to write in the access policy of bucket or object
When deleting the already existing usergroup check the checkbox of usergroup
which you want to delete and then click [Delete]
When you click [Delete] it is immediately deleted Confirm carefully and then
delete it
3-5) Publish the bucket and object
3
Click
4
If the public setting of bucket is different from object one object one is preferred
The published object is accessible at URL below
http[Bucket name]strcloudn-servicecom[(Folder name)Object name]
20
When setting the public URL for object click [Public URL access]
You cannot set the public URL for bucket
3-5) Publish the bucket and object
５
Set [Allow reading] [Issue the secure URL (https)] [Maximum number of downloading] and
[Expiration date] Set only [Allow reading] or both [Allow reading] and [Issue the secure URL
(https)] and click [Save] to generate the URL
－Allow reading
Allows the access from external to the object
－Issue the secure URL (https)
Allows the secure access from external to the object
－Maximum number of downloading
Sets the maximum number of downloading
－Expiration date
Sets the expiration date for access from external
6
Click
21
After editing all public settings click [Save] to terminate
3-5) Publish the bucket and object
７
Click
22
Set the account profile This setting is not mandatory
Enter the account profile information and click [Save]
ldquoAccount Profile was modified successfully appears on top of screen The setting of
account profile is completed
Click the [Account] tab from the Object Storage control panel
Click
4-1) Set the account profile
1
２
２
Click
23
Confirm the access key and private key (secret key) required when using API
Click the [Security Credentials] tab to display the access key ID If you want to display the
private key (Secret Key) click [View Secret Key] in the [Actions]
The private key (Secret Key) is displayed
Click the [Account] tab from the Object Storage control panel
xxxxxxxxx
xxxxxxxxx
4-2) Confirm the API key
1
2
３
Click Click
Click
24
Search a user
Click the [Admin] tab from the Object Storage control panel
Enter and select the conditions to search the user and click [Search]
The result is shown in [User List]
Click [View User Data] to display the bucket and object of user
5-1) Search a user
1
２
３
Click
Click
Click
25
Display the usage amount of Object Storage as a report
Click the [Usage] tab from the Object Storage control panel
Do not use (Current Billing Period) and (Previous Billing Period) in [Time Period]
6-1) Display the usage report
1
Click ２
Enter in [Operation] [Time Period] and [Report Granularity] of report displayed [Group ID] setting
and [User]
－Operation
Select the type of report to be displayed from downstream data transfer (Data Transfer-In-Bytes)
upstream data transfer (Data Transfer-In-Bytes) total capacity (Storage-Bytes) number of object
(Storage-Objects) number of all requests (All Requests) number of requests received (Get
Requests) number of requests sent (Put Requests) and number of requests deleted (Delete
Requests)
－Time Period
Select the period to be displayed from (Last week) (Last Month) and (Custom Period) When
selecting Custom Period set the period
－Report Granularity
Select the unit of report to be displayed from (Hours) (Days) (Months) and actual data (Raw)
－Group ID
Select the group ID in order to browse the report
－User
In order to browse a specific user enter the user name
26
Click [List] to display the result in the list format
You can download the same result in CSV format by clicking [Download CSV]
Click [Graph] to display the result in the graph format
6-1) Display the usage report
3
4
16
Select the file targeted from Reference and click [Upload the file]
Confirm that the object registered in [Name] is shown
The file size to upload the file from the Storage console is up to 2G due to
limitation of recommended browser FireFox If you desire to upload the file of more
than 2G use Object Storage API
3-3) Upload the object (file)
Click
3
3
In order to register the folder enter the folder name and click [Create the folder]
When uploading the HTML file it can work as a static contents server
17
Check the checkbox of object which you want to delete in [Select the bucket] and then click
[Delete]
The confirmation screen appears Click [OK] to complete deletion
Delete the object
3-4) Delete the object
Click the [Explorer] tab from the Object Storage control panel
1
Click
Click
２
3
Click
18
Perform the public setting of bucket and object The setting method is common to bucket and
object
When you want to publish the bucket select the target bucket in [Select the bucket] and
click [Access right]
When you want to publish the object check the checkbox of target object and click
[Access right]
When you add the user and group which can access to bucket or object click [Add]
Public and Storage_User listed in the first line mean below
- Public Published on Internet
- Storage_User Published to all customers who use Object Storage
3-5) Publish the bucket and object
Click the [Explorer] tab from the Object Storage control panel
1
２
３
Click
Click
Click
Click
19
When editing the public setting of usergroup edit the public setting by using the
checkbox of target user or group respectively By default all public settings are allowed
－Readable
Allows to read the bucket or object
－Writable (only for bucket)
Allows to write in the bucket
－ACP readable
Allows to read the access policy of bucket or object
－ACP writable
Allows to write in the access policy of bucket or object
When deleting the already existing usergroup check the checkbox of usergroup
which you want to delete and then click [Delete]
When you click [Delete] it is immediately deleted Confirm carefully and then
delete it
3-5) Publish the bucket and object
3
Click
4
If the public setting of bucket is different from object one object one is preferred
The published object is accessible at URL below
http[Bucket name]strcloudn-servicecom[(Folder name)Object name]
20
When setting the public URL for object click [Public URL access]
You cannot set the public URL for bucket
3-5) Publish the bucket and object
５
Set [Allow reading] [Issue the secure URL (https)] [Maximum number of downloading] and
[Expiration date] Set only [Allow reading] or both [Allow reading] and [Issue the secure URL
(https)] and click [Save] to generate the URL
－Allow reading
Allows the access from external to the object
－Issue the secure URL (https)
Allows the secure access from external to the object
－Maximum number of downloading
Sets the maximum number of downloading
－Expiration date
Sets the expiration date for access from external
6
Click
21
After editing all public settings click [Save] to terminate
3-5) Publish the bucket and object
７
Click
22
Set the account profile This setting is not mandatory
Enter the account profile information and click [Save]
ldquoAccount Profile was modified successfully appears on top of screen The setting of
account profile is completed
Click the [Account] tab from the Object Storage control panel
Click
4-1) Set the account profile
1
２
２
Click
23
Confirm the access key and private key (secret key) required when using API
Click the [Security Credentials] tab to display the access key ID If you want to display the
private key (Secret Key) click [View Secret Key] in the [Actions]
The private key (Secret Key) is displayed
Click the [Account] tab from the Object Storage control panel
xxxxxxxxx
xxxxxxxxx
4-2) Confirm the API key
1
2
３
Click Click
Click
24
Search a user
Click the [Admin] tab from the Object Storage control panel
Enter and select the conditions to search the user and click [Search]
The result is shown in [User List]
Click [View User Data] to display the bucket and object of user
5-1) Search a user
1
２
３
Click
Click
Click
25
Display the usage amount of Object Storage as a report
Click the [Usage] tab from the Object Storage control panel
Do not use (Current Billing Period) and (Previous Billing Period) in [Time Period]
6-1) Display the usage report
1
Click ２
Enter in [Operation] [Time Period] and [Report Granularity] of report displayed [Group ID] setting
and [User]
－Operation
Select the type of report to be displayed from downstream data transfer (Data Transfer-In-Bytes)
upstream data transfer (Data Transfer-In-Bytes) total capacity (Storage-Bytes) number of object
(Storage-Objects) number of all requests (All Requests) number of requests received (Get
Requests) number of requests sent (Put Requests) and number of requests deleted (Delete
Requests)
－Time Period
Select the period to be displayed from (Last week) (Last Month) and (Custom Period) When
selecting Custom Period set the period
－Report Granularity
Select the unit of report to be displayed from (Hours) (Days) (Months) and actual data (Raw)
－Group ID
Select the group ID in order to browse the report
－User
In order to browse a specific user enter the user name
26
Click [List] to display the result in the list format
You can download the same result in CSV format by clicking [Download CSV]
Click [Graph] to display the result in the graph format
6-1) Display the usage report
3
4
17
Check the checkbox of object which you want to delete in [Select the bucket] and then click
[Delete]
The confirmation screen appears Click [OK] to complete deletion
Delete the object
3-4) Delete the object
Click the [Explorer] tab from the Object Storage control panel
1
Click
Click
２
3
Click
18
Perform the public setting of bucket and object The setting method is common to bucket and
object
When you want to publish the bucket select the target bucket in [Select the bucket] and
click [Access right]
When you want to publish the object check the checkbox of target object and click
[Access right]
When you add the user and group which can access to bucket or object click [Add]
Public and Storage_User listed in the first line mean below
- Public Published on Internet
- Storage_User Published to all customers who use Object Storage
3-5) Publish the bucket and object
Click the [Explorer] tab from the Object Storage control panel
1
２
３
Click
Click
Click
Click
19
When editing the public setting of usergroup edit the public setting by using the
checkbox of target user or group respectively By default all public settings are allowed
－Readable
Allows to read the bucket or object
－Writable (only for bucket)
Allows to write in the bucket
－ACP readable
Allows to read the access policy of bucket or object
－ACP writable
Allows to write in the access policy of bucket or object
When deleting the already existing usergroup check the checkbox of usergroup
which you want to delete and then click [Delete]
When you click [Delete] it is immediately deleted Confirm carefully and then
delete it
3-5) Publish the bucket and object
3
Click
4
If the public setting of bucket is different from object one object one is preferred
The published object is accessible at URL below
http[Bucket name]strcloudn-servicecom[(Folder name)Object name]
20
When setting the public URL for object click [Public URL access]
You cannot set the public URL for bucket
3-5) Publish the bucket and object
５
Set [Allow reading] [Issue the secure URL (https)] [Maximum number of downloading] and
[Expiration date] Set only [Allow reading] or both [Allow reading] and [Issue the secure URL
(https)] and click [Save] to generate the URL
－Allow reading
Allows the access from external to the object
－Issue the secure URL (https)
Allows the secure access from external to the object
－Maximum number of downloading
Sets the maximum number of downloading
－Expiration date
Sets the expiration date for access from external
6
Click
21
After editing all public settings click [Save] to terminate
3-5) Publish the bucket and object
７
Click
22
Set the account profile This setting is not mandatory
Enter the account profile information and click [Save]
ldquoAccount Profile was modified successfully appears on top of screen The setting of
account profile is completed
Click the [Account] tab from the Object Storage control panel
Click
4-1) Set the account profile
1
２
２
Click
23
Confirm the access key and private key (secret key) required when using API
Click the [Security Credentials] tab to display the access key ID If you want to display the
private key (Secret Key) click [View Secret Key] in the [Actions]
The private key (Secret Key) is displayed
Click the [Account] tab from the Object Storage control panel
xxxxxxxxx
xxxxxxxxx
4-2) Confirm the API key
1
2
３
Click Click
Click
24
Search a user
Click the [Admin] tab from the Object Storage control panel
Enter and select the conditions to search the user and click [Search]
The result is shown in [User List]
Click [View User Data] to display the bucket and object of user
5-1) Search a user
1
２
３
Click
Click
Click
25
Display the usage amount of Object Storage as a report
Click the [Usage] tab from the Object Storage control panel
Do not use (Current Billing Period) and (Previous Billing Period) in [Time Period]
6-1) Display the usage report
1
Click ２
Enter in [Operation] [Time Period] and [Report Granularity] of report displayed [Group ID] setting
and [User]
－Operation
Select the type of report to be displayed from downstream data transfer (Data Transfer-In-Bytes)
upstream data transfer (Data Transfer-In-Bytes) total capacity (Storage-Bytes) number of object
(Storage-Objects) number of all requests (All Requests) number of requests received (Get
Requests) number of requests sent (Put Requests) and number of requests deleted (Delete
Requests)
－Time Period
Select the period to be displayed from (Last week) (Last Month) and (Custom Period) When
selecting Custom Period set the period
－Report Granularity
Select the unit of report to be displayed from (Hours) (Days) (Months) and actual data (Raw)
－Group ID
Select the group ID in order to browse the report
－User
In order to browse a specific user enter the user name
26
Click [List] to display the result in the list format
You can download the same result in CSV format by clicking [Download CSV]
Click [Graph] to display the result in the graph format
6-1) Display the usage report
3
4
18
Perform the public setting of bucket and object The setting method is common to bucket and
object
When you want to publish the bucket select the target bucket in [Select the bucket] and
click [Access right]
When you want to publish the object check the checkbox of target object and click
[Access right]
When you add the user and group which can access to bucket or object click [Add]
Public and Storage_User listed in the first line mean below
- Public Published on Internet
- Storage_User Published to all customers who use Object Storage
3-5) Publish the bucket and object
Click the [Explorer] tab from the Object Storage control panel
1
２
３
Click
Click
Click
Click
19
When editing the public setting of usergroup edit the public setting by using the
checkbox of target user or group respectively By default all public settings are allowed
－Readable
Allows to read the bucket or object
－Writable (only for bucket)
Allows to write in the bucket
－ACP readable
Allows to read the access policy of bucket or object
－ACP writable
Allows to write in the access policy of bucket or object
When deleting the already existing usergroup check the checkbox of usergroup
which you want to delete and then click [Delete]
When you click [Delete] it is immediately deleted Confirm carefully and then
delete it
3-5) Publish the bucket and object
3
Click
4
If the public setting of bucket is different from object one object one is preferred
The published object is accessible at URL below
http[Bucket name]strcloudn-servicecom[(Folder name)Object name]
20
When setting the public URL for object click [Public URL access]
You cannot set the public URL for bucket
3-5) Publish the bucket and object
５
Set [Allow reading] [Issue the secure URL (https)] [Maximum number of downloading] and
[Expiration date] Set only [Allow reading] or both [Allow reading] and [Issue the secure URL
(https)] and click [Save] to generate the URL
－Allow reading
Allows the access from external to the object
－Issue the secure URL (https)
Allows the secure access from external to the object
－Maximum number of downloading
Sets the maximum number of downloading
－Expiration date
Sets the expiration date for access from external
6
Click
21
After editing all public settings click [Save] to terminate
3-5) Publish the bucket and object
７
Click
22
Set the account profile This setting is not mandatory
Enter the account profile information and click [Save]
ldquoAccount Profile was modified successfully appears on top of screen The setting of
account profile is completed
Click the [Account] tab from the Object Storage control panel
Click
4-1) Set the account profile
1
２
２
Click
23
Confirm the access key and private key (secret key) required when using API
Click the [Security Credentials] tab to display the access key ID If you want to display the
private key (Secret Key) click [View Secret Key] in the [Actions]
The private key (Secret Key) is displayed
Click the [Account] tab from the Object Storage control panel
xxxxxxxxx
xxxxxxxxx
4-2) Confirm the API key
1
2
３
Click Click
Click
24
Search a user
Click the [Admin] tab from the Object Storage control panel
Enter and select the conditions to search the user and click [Search]
The result is shown in [User List]
Click [View User Data] to display the bucket and object of user
5-1) Search a user
1
２
３
Click
Click
Click
25
Display the usage amount of Object Storage as a report
Click the [Usage] tab from the Object Storage control panel
Do not use (Current Billing Period) and (Previous Billing Period) in [Time Period]
6-1) Display the usage report
1
Click ２
Enter in [Operation] [Time Period] and [Report Granularity] of report displayed [Group ID] setting
and [User]
－Operation
Select the type of report to be displayed from downstream data transfer (Data Transfer-In-Bytes)
upstream data transfer (Data Transfer-In-Bytes) total capacity (Storage-Bytes) number of object
(Storage-Objects) number of all requests (All Requests) number of requests received (Get
Requests) number of requests sent (Put Requests) and number of requests deleted (Delete
Requests)
－Time Period
Select the period to be displayed from (Last week) (Last Month) and (Custom Period) When
selecting Custom Period set the period
－Report Granularity
Select the unit of report to be displayed from (Hours) (Days) (Months) and actual data (Raw)
－Group ID
Select the group ID in order to browse the report
－User
In order to browse a specific user enter the user name
26
Click [List] to display the result in the list format
You can download the same result in CSV format by clicking [Download CSV]
Click [Graph] to display the result in the graph format
6-1) Display the usage report
3
4
19
When editing the public setting of usergroup edit the public setting by using the
checkbox of target user or group respectively By default all public settings are allowed
－Readable
Allows to read the bucket or object
－Writable (only for bucket)
Allows to write in the bucket
－ACP readable
Allows to read the access policy of bucket or object
－ACP writable
Allows to write in the access policy of bucket or object
When deleting the already existing usergroup check the checkbox of usergroup
which you want to delete and then click [Delete]
When you click [Delete] it is immediately deleted Confirm carefully and then
delete it
3-5) Publish the bucket and object
3
Click
4
If the public setting of bucket is different from object one object one is preferred
The published object is accessible at URL below
http[Bucket name]strcloudn-servicecom[(Folder name)Object name]
20
When setting the public URL for object click [Public URL access]
You cannot set the public URL for bucket
3-5) Publish the bucket and object
５
Set [Allow reading] [Issue the secure URL (https)] [Maximum number of downloading] and
[Expiration date] Set only [Allow reading] or both [Allow reading] and [Issue the secure URL
(https)] and click [Save] to generate the URL
－Allow reading
Allows the access from external to the object
－Issue the secure URL (https)
Allows the secure access from external to the object
－Maximum number of downloading
Sets the maximum number of downloading
－Expiration date
Sets the expiration date for access from external
6
Click
21
After editing all public settings click [Save] to terminate
3-5) Publish the bucket and object
７
Click
22
Set the account profile This setting is not mandatory
Enter the account profile information and click [Save]
ldquoAccount Profile was modified successfully appears on top of screen The setting of
account profile is completed
Click the [Account] tab from the Object Storage control panel
Click
4-1) Set the account profile
1
２
２
Click
23
Confirm the access key and private key (secret key) required when using API
Click the [Security Credentials] tab to display the access key ID If you want to display the
private key (Secret Key) click [View Secret Key] in the [Actions]
The private key (Secret Key) is displayed
Click the [Account] tab from the Object Storage control panel
xxxxxxxxx
xxxxxxxxx
4-2) Confirm the API key
1
2
３
Click Click
Click
24
Search a user
Click the [Admin] tab from the Object Storage control panel
Enter and select the conditions to search the user and click [Search]
The result is shown in [User List]
Click [View User Data] to display the bucket and object of user
5-1) Search a user
1
２
３
Click
Click
Click
25
Display the usage amount of Object Storage as a report
Click the [Usage] tab from the Object Storage control panel
Do not use (Current Billing Period) and (Previous Billing Period) in [Time Period]
6-1) Display the usage report
1
Click ２
Enter in [Operation] [Time Period] and [Report Granularity] of report displayed [Group ID] setting
and [User]
－Operation
Select the type of report to be displayed from downstream data transfer (Data Transfer-In-Bytes)
upstream data transfer (Data Transfer-In-Bytes) total capacity (Storage-Bytes) number of object
(Storage-Objects) number of all requests (All Requests) number of requests received (Get
Requests) number of requests sent (Put Requests) and number of requests deleted (Delete
Requests)
－Time Period
Select the period to be displayed from (Last week) (Last Month) and (Custom Period) When
selecting Custom Period set the period
－Report Granularity
Select the unit of report to be displayed from (Hours) (Days) (Months) and actual data (Raw)
－Group ID
Select the group ID in order to browse the report
－User
In order to browse a specific user enter the user name
26
Click [List] to display the result in the list format
You can download the same result in CSV format by clicking [Download CSV]
Click [Graph] to display the result in the graph format
6-1) Display the usage report
3
4
20
When setting the public URL for object click [Public URL access]
You cannot set the public URL for bucket
3-5) Publish the bucket and object
５
Set [Allow reading] [Issue the secure URL (https)] [Maximum number of downloading] and
[Expiration date] Set only [Allow reading] or both [Allow reading] and [Issue the secure URL
(https)] and click [Save] to generate the URL
－Allow reading
Allows the access from external to the object
－Issue the secure URL (https)
Allows the secure access from external to the object
－Maximum number of downloading
Sets the maximum number of downloading
－Expiration date
Sets the expiration date for access from external
6
Click
21
After editing all public settings click [Save] to terminate
3-5) Publish the bucket and object
７
Click
22
Set the account profile This setting is not mandatory
Enter the account profile information and click [Save]
ldquoAccount Profile was modified successfully appears on top of screen The setting of
account profile is completed
Click the [Account] tab from the Object Storage control panel
Click
4-1) Set the account profile
1
２
２
Click
23
Confirm the access key and private key (secret key) required when using API
Click the [Security Credentials] tab to display the access key ID If you want to display the
private key (Secret Key) click [View Secret Key] in the [Actions]
The private key (Secret Key) is displayed
Click the [Account] tab from the Object Storage control panel
xxxxxxxxx
xxxxxxxxx
4-2) Confirm the API key
1
2
３
Click Click
Click
24
Search a user
Click the [Admin] tab from the Object Storage control panel
Enter and select the conditions to search the user and click [Search]
The result is shown in [User List]
Click [View User Data] to display the bucket and object of user
5-1) Search a user
1
２
３
Click
Click
Click
25
Display the usage amount of Object Storage as a report
Click the [Usage] tab from the Object Storage control panel
Do not use (Current Billing Period) and (Previous Billing Period) in [Time Period]
6-1) Display the usage report
1
Click ２
Enter in [Operation] [Time Period] and [Report Granularity] of report displayed [Group ID] setting
and [User]
－Operation
Select the type of report to be displayed from downstream data transfer (Data Transfer-In-Bytes)
upstream data transfer (Data Transfer-In-Bytes) total capacity (Storage-Bytes) number of object
(Storage-Objects) number of all requests (All Requests) number of requests received (Get
Requests) number of requests sent (Put Requests) and number of requests deleted (Delete
Requests)
－Time Period
Select the period to be displayed from (Last week) (Last Month) and (Custom Period) When
selecting Custom Period set the period
－Report Granularity
Select the unit of report to be displayed from (Hours) (Days) (Months) and actual data (Raw)
－Group ID
Select the group ID in order to browse the report
－User
In order to browse a specific user enter the user name
26
Click [List] to display the result in the list format
You can download the same result in CSV format by clicking [Download CSV]
Click [Graph] to display the result in the graph format
6-1) Display the usage report
3
4
21
After editing all public settings click [Save] to terminate
3-5) Publish the bucket and object
７
Click
22
Set the account profile This setting is not mandatory
Enter the account profile information and click [Save]
ldquoAccount Profile was modified successfully appears on top of screen The setting of
account profile is completed
Click the [Account] tab from the Object Storage control panel
Click
4-1) Set the account profile
1
２
２
Click
23
Confirm the access key and private key (secret key) required when using API
Click the [Security Credentials] tab to display the access key ID If you want to display the
private key (Secret Key) click [View Secret Key] in the [Actions]
The private key (Secret Key) is displayed
Click the [Account] tab from the Object Storage control panel
xxxxxxxxx
xxxxxxxxx
4-2) Confirm the API key
1
2
３
Click Click
Click
24
Search a user
Click the [Admin] tab from the Object Storage control panel
Enter and select the conditions to search the user and click [Search]
The result is shown in [User List]
Click [View User Data] to display the bucket and object of user
5-1) Search a user
1
２
３
Click
Click
Click
25
Display the usage amount of Object Storage as a report
Click the [Usage] tab from the Object Storage control panel
Do not use (Current Billing Period) and (Previous Billing Period) in [Time Period]
6-1) Display the usage report
1
Click ２
Enter in [Operation] [Time Period] and [Report Granularity] of report displayed [Group ID] setting
and [User]
－Operation
Select the type of report to be displayed from downstream data transfer (Data Transfer-In-Bytes)
upstream data transfer (Data Transfer-In-Bytes) total capacity (Storage-Bytes) number of object
(Storage-Objects) number of all requests (All Requests) number of requests received (Get
Requests) number of requests sent (Put Requests) and number of requests deleted (Delete
Requests)
－Time Period
Select the period to be displayed from (Last week) (Last Month) and (Custom Period) When
selecting Custom Period set the period
－Report Granularity
Select the unit of report to be displayed from (Hours) (Days) (Months) and actual data (Raw)
－Group ID
Select the group ID in order to browse the report
－User
In order to browse a specific user enter the user name
26
Click [List] to display the result in the list format
You can download the same result in CSV format by clicking [Download CSV]
Click [Graph] to display the result in the graph format
6-1) Display the usage report
3
4
22
Set the account profile This setting is not mandatory
Enter the account profile information and click [Save]
ldquoAccount Profile was modified successfully appears on top of screen The setting of
account profile is completed
Click the [Account] tab from the Object Storage control panel
Click
4-1) Set the account profile
1
２
２
Click
23
Confirm the access key and private key (secret key) required when using API
Click the [Security Credentials] tab to display the access key ID If you want to display the
private key (Secret Key) click [View Secret Key] in the [Actions]
The private key (Secret Key) is displayed
Click the [Account] tab from the Object Storage control panel
xxxxxxxxx
xxxxxxxxx
4-2) Confirm the API key
1
2
３
Click Click
Click
24
Search a user
Click the [Admin] tab from the Object Storage control panel
Enter and select the conditions to search the user and click [Search]
The result is shown in [User List]
Click [View User Data] to display the bucket and object of user
5-1) Search a user
1
２
３
Click
Click
Click
25
Display the usage amount of Object Storage as a report
Click the [Usage] tab from the Object Storage control panel
Do not use (Current Billing Period) and (Previous Billing Period) in [Time Period]
6-1) Display the usage report
1
Click ２
Enter in [Operation] [Time Period] and [Report Granularity] of report displayed [Group ID] setting
and [User]
－Operation
Select the type of report to be displayed from downstream data transfer (Data Transfer-In-Bytes)
upstream data transfer (Data Transfer-In-Bytes) total capacity (Storage-Bytes) number of object
(Storage-Objects) number of all requests (All Requests) number of requests received (Get
Requests) number of requests sent (Put Requests) and number of requests deleted (Delete
Requests)
－Time Period
Select the period to be displayed from (Last week) (Last Month) and (Custom Period) When
selecting Custom Period set the period
－Report Granularity
Select the unit of report to be displayed from (Hours) (Days) (Months) and actual data (Raw)
－Group ID
Select the group ID in order to browse the report
－User
In order to browse a specific user enter the user name
26
Click [List] to display the result in the list format
You can download the same result in CSV format by clicking [Download CSV]
Click [Graph] to display the result in the graph format
6-1) Display the usage report
3
4
23
Confirm the access key and private key (secret key) required when using API
Click the [Security Credentials] tab to display the access key ID If you want to display the
private key (Secret Key) click [View Secret Key] in the [Actions]
The private key (Secret Key) is displayed
Click the [Account] tab from the Object Storage control panel
xxxxxxxxx
xxxxxxxxx
4-2) Confirm the API key
1
2
３
Click Click
Click
24
Search a user
Click the [Admin] tab from the Object Storage control panel
Enter and select the conditions to search the user and click [Search]
The result is shown in [User List]
Click [View User Data] to display the bucket and object of user
5-1) Search a user
1
２
３
Click
Click
Click
25
Display the usage amount of Object Storage as a report
Click the [Usage] tab from the Object Storage control panel
Do not use (Current Billing Period) and (Previous Billing Period) in [Time Period]
6-1) Display the usage report
1
Click ２
Enter in [Operation] [Time Period] and [Report Granularity] of report displayed [Group ID] setting
and [User]
－Operation
Select the type of report to be displayed from downstream data transfer (Data Transfer-In-Bytes)
upstream data transfer (Data Transfer-In-Bytes) total capacity (Storage-Bytes) number of object
(Storage-Objects) number of all requests (All Requests) number of requests received (Get
Requests) number of requests sent (Put Requests) and number of requests deleted (Delete
Requests)
－Time Period
Select the period to be displayed from (Last week) (Last Month) and (Custom Period) When
selecting Custom Period set the period
－Report Granularity
Select the unit of report to be displayed from (Hours) (Days) (Months) and actual data (Raw)
－Group ID
Select the group ID in order to browse the report
－User
In order to browse a specific user enter the user name
26
Click [List] to display the result in the list format
You can download the same result in CSV format by clicking [Download CSV]
Click [Graph] to display the result in the graph format
6-1) Display the usage report
3
4
24
Search a user
Click the [Admin] tab from the Object Storage control panel
Enter and select the conditions to search the user and click [Search]
The result is shown in [User List]
Click [View User Data] to display the bucket and object of user
5-1) Search a user
1
２
３
Click
Click
Click
25
Display the usage amount of Object Storage as a report
Click the [Usage] tab from the Object Storage control panel
Do not use (Current Billing Period) and (Previous Billing Period) in [Time Period]
6-1) Display the usage report
1
Click ２
Enter in [Operation] [Time Period] and [Report Granularity] of report displayed [Group ID] setting
and [User]
－Operation
Select the type of report to be displayed from downstream data transfer (Data Transfer-In-Bytes)
upstream data transfer (Data Transfer-In-Bytes) total capacity (Storage-Bytes) number of object
(Storage-Objects) number of all requests (All Requests) number of requests received (Get
Requests) number of requests sent (Put Requests) and number of requests deleted (Delete
Requests)
－Time Period
Select the period to be displayed from (Last week) (Last Month) and (Custom Period) When
selecting Custom Period set the period
－Report Granularity
Select the unit of report to be displayed from (Hours) (Days) (Months) and actual data (Raw)
－Group ID
Select the group ID in order to browse the report
－User
In order to browse a specific user enter the user name
26
Click [List] to display the result in the list format
You can download the same result in CSV format by clicking [Download CSV]
Click [Graph] to display the result in the graph format
6-1) Display the usage report
3
4
25
Display the usage amount of Object Storage as a report
Click the [Usage] tab from the Object Storage control panel
Do not use (Current Billing Period) and (Previous Billing Period) in [Time Period]
6-1) Display the usage report
1
Click ２
Enter in [Operation] [Time Period] and [Report Granularity] of report displayed [Group ID] setting
and [User]
－Operation
Select the type of report to be displayed from downstream data transfer (Data Transfer-In-Bytes)
upstream data transfer (Data Transfer-In-Bytes) total capacity (Storage-Bytes) number of object
(Storage-Objects) number of all requests (All Requests) number of requests received (Get
Requests) number of requests sent (Put Requests) and number of requests deleted (Delete
Requests)
－Time Period
Select the period to be displayed from (Last week) (Last Month) and (Custom Period) When
selecting Custom Period set the period
－Report Granularity
Select the unit of report to be displayed from (Hours) (Days) (Months) and actual data (Raw)
－Group ID
Select the group ID in order to browse the report
－User
In order to browse a specific user enter the user name
26
Click [List] to display the result in the list format
You can download the same result in CSV format by clicking [Download CSV]
Click [Graph] to display the result in the graph format
6-1) Display the usage report
3
4
26
Click [List] to display the result in the list format
You can download the same result in CSV format by clicking [Download CSV]
Click [Graph] to display the result in the graph format
6-1) Display the usage report
3
4