news letter – june 2018
TRANSCRIPT
B. M. S. COLLEGE OF ENGINEERING
Department of Mechanical Engineering
Induction Programme
4th June 2018
Department Mechanical Engineering and Department of
Industrial Engineering & Management along with ISTE-
BMSCE Chapter jointly organized One-Week AICTE-ISTE
sponsored Induction Programme on “Latest Trends in
Renewable Energy Technologies” from 4th to 9th June
2018.
Graduation Day
9th June 2018
Graduation Day was held on 9th June 2018 in Indoor
Stadium for the Class of 2017 students. 115 students of
the department received the certificates.
Rank Holders - 2017
Ran
k1 2 3
Name
USN
CGPA
Sweekar
1BM13ME109
9.65
Hanamantha M Patil
1BM13ME044
9.37
Bharathkumar S
1BM13ME030
9.26
Industrial Visit
14th June 2018
ISTE Student Chapter, in association with the
department of Mechanical Engineering, arranged an
industrial visit to TVS Motors, Bengaluru on 14/06/2018
for non-teaching staff of Department of Mechanical
Engineering. The group visited manufacturing and
assembly section. 27 staff members attended the visit.
The event was coordinated by faculty Dr. Santosh
Doreswamy and Dr. Suhas B. G., supported by Dr.
Bheemsha Arya, Head of Mechanical Engineering
Department and Dr. Rudra Naik, Chairman, ISTE-BMSCE
Chapter.
Staff Development Programme
18 – 22 June 2018
Department of Mechanical Engineering, BMSCE in
association with Department of Mechanical Engineering,
M. J. P. Rohilkhand University, Bareilly, UP, organized
One week Technical Staff Development Programme on
“Machine Tools Maintenance” from 18th to 22nd June
2018.
This programme was aimed at train the participants in
understanding the conventional and non-conventional
machine tool maintenance, programming, etc. The staffs
were trained with hands-on sessions on Routine,
Preventive, Breakdown and Corrective maintenance.
Department of Mechanical Engineering, BMSCE Page 1
News Letter – June 2018
News Letter – June 2018
The resource persons from industry were Sri. M. Raju
and Sri. Siddesh. Training sessions were also delivered
by Dr. K. N. P. Prasad, Associate Professor,
Mr. Shanmukha, Foreman, and Mr. Mahesh, Lab
Instructor, Department of IEM, BMSCE.
Training / FDP/ Conference/ Meeting
attended by Faculty
Faculty Programme Date Venue
Dr. L. Ravikumar
TEQIP-III
Performance
auditing
02.06.2018 New Delhi
Dr. Vardhaman S
Mudakappanavar
Dr. R. N. Ravikumar
AICTE-ISTE
sponsored one
week Refresher
Programme on “
Design of Machine
Elements”
02.07.2018
to
07.07.2018
Vidyavardhaka
College of
Engineering,
Mysuru
Sri. Ram Rohit V
27th Nordic
Rheology
Conference for oral
presentation of his
research paper
titled “ Fusion &
characterization of
Simarouba oil-
based Green
Magneto
Rheological (GMR)
fluids”
13.06.2018
to
15.06.2018
Trondheim,
Norway
Sri. Madhav Murthy
ISAMPE Executive
Council Meeting as
Student Chapter
Chairman,
Bengaluru
20.06.2018 NAL, Bengaluru
Faculty Publications
Faculty Title of Paper Publication Details
Shashaank K.
Shivashankar R.
Srivatsa
Thermal Management
of PCIe Add in Card SSD
Proc. ARSS Int.
Conf. ICMCIPE-
2018
Faculty Achievement
29th June 2018
Sri. Devaraj K, Assistant Professor, Department of
Mechanical Engineering, was felicitated by Visvesvaraya
Technological University on their 20th Foundation day on
29-06-2018 for his contribution to the university as
Guest faculty in teaching M. Tech. Aerospace Propulsion
Technology students at Centre for Postgraduate studies,
Bengaluru during the year 2011-2013. The felicitation
included a momento, a wrist watch and a shawl.
Department of Mechanical Engineering, BMSCE Page 2
News Letter – June 2018
Training / FDP/ Conference/ Meeting
attended by Students/Research Scholar
Research Scholar Programme Date Venue
Sri. Niranjan C A
One-week
International
Workshop on
Advancements in
welding Technology
(AWT-2018)
19-23
June,2018
National
Institute of
Technology,
Trichuchirapalli
Training / FDP/ Conference/ Meeting
attended by Technical Staff & Admin Staff
Staff Programme Date Venue
Sri. R. C. Puttaswamy
Sri. S. Babu
Sri. Basavaraju
Sri. R. Lokesh
Sri. V. Vijayakumar
Sri. G. Krishna Murthy
Sri. Mallesh R.
Sri. S. Chitti Babu
Sri. H. N. Devaraja
Sri. N. Nagaraju
Sri. Naveen Kumar R
Sri. C. V. Ramakrishna
Sri. N. Srinath
Sri. K. Lakshman
Sri. C. Hariprasad
Sri. B. K. Srinivasa
Sri. T. V. Rajendra Prasad
Sri. V. Subramanyam
Sri. S. Devendra
Sri. N. Keshava
Sri. A. N. Damodara
Sri. K. Pattabhi
Sri. Sabeel-ur-Rahaman
Sri. Ramakrishna. R
Sri. Srikanth S
Sri. Mallikarjun S Rampur
Sri. Dandapani S
Sri. Naveen Kumar V
Sri. A. R. Vinod Kumar
Sri. Yaga Murthy P
Technical Staff
Development Program
on Machine Tools
Maintenance
18.06.2018
to
22.06.2018
BMSCE
Sri. T. N. Jagadeesh
Ms. Sudha H. R.
One day workshop on
Professionalism19.06.2018 BMSCE
Student Achievement
Mr. Pavan Girish Pandit, 1BM16MSE07, Student of
M.Tech. Manufacturing Science & Engineering, has been
selected for Ph.D. program in Department of Mechanical
Engineering at IIT-Madras under HTRA Scheme.
Programme commences from July 10, 2018. He belongs
to first batch of Autonomous M.Tech. Programme.
Student Publication
Faculty Title of PaperPublication
Details
Shashaank K.
1BM16MMD15
Thermal Management
of PCIe Add in Card SSD
Proc. ARSS Int.
Conf. ICMCIPE-
2018
K.Venugopal1BM16MMD18
Development of
Stability Lobe Diagram
using Receptance
Coupling Substructure
Analysis for a Vertical
Milling Centre
HSM 14th
International
Conference on High
Speed Machining
2018
Departmental Meetings
Date &
TimeVenue Agenda
05.06.2018
11.00 A.M.ML1
Syllabus Review & Subject Allotment-
Odd Sem 2018
14.06.2018
10.30 A.M.MESH
Curriculum Revision 2018-19 (I/II
Semester)
27.06.2018
11.00 A.M.MESH
Establishing CNC & Automation Lab in
the Department.
Department of Mechanical Engineering, BMSCE Page 3
B. M. S. COLLEGE OF ENGINEERINGDepartment of Mechanical Engineering
Two Weeks FDP Programme
2nd – 13th July 2018Two weeks Faculty Development Program on Queuing
Theory and Stochastic Process for Advanced Systems was
jointly organized by Department of Information Science &
Engg., Electrical & Electronics Engg, Mechanical Engg,
Industrial Engg. & Management, Computer Science &
Engg. in association with Departments of Computer Science
& information Technology, Electrical Engg, Electronics &
Communication and Electronics & Instrumentation and
Mechanical Engg. FET, MJP, Rohilkhand University,
Bareilly U.P under twining.
Two Weeks FDP Programme
16th – 27th July 2018
Two weeks Faculty Development Programme on “Advanced
Manufacturing”. This program was inaugurated 16-7-2018
by Mr Jaganath, Mysore. The function was presided by Dr.B
V Ravishankar, Vice Principal, HOD, Dept. of Mechanical
Engineering, and Dr.S.Srinivas & Dr.Tataram K Chavan
Program Chief Coordinators. This session started with an
inauguration and a keynote address on Advanced
Manufacturing. The various topics covered are
Micromachining, SEM, Electro-pulse cutting, Mechatronics,
FEM APPLICATIONS in Manufacturing, 3D printing,
Industrial Hydraulics, Manufacturing simulation, Friction
stir welding, Nano machining, Characterization of Nano
Materials – TEM & XRD, Nano Materials, Abrasive Water
jet Cutting, EDM, Tribology, Advance Welding for Aero
Engines and Advanced Manufacturing for Gas turbine
application followed by lab sessions in the afternoons. Two
week FDP was concluded with the valedictory function held
on 27-7-2018. The chief guest was Dr. V Dillibabu from
DRDO. The function was presided by Dr. K. Mallikharjuna
Babu Principal, Guest of honour, Dr.B V Ravishankar, Vice
Principal, Dr.L.Ravikumar, Dr.Bheemsha Arya, HOD, Dept.
of Mechanical Engineering, Dr.S.Srinivas & Dr.Tataram K
Chavan Program Chief Coordinators. Participants shared
their feedback about the program. The certificates to all the
participants were distributed. Four best participants were
felicitated. The speakers were from IISc, GTRE, FESTO
and Kennametal. An industrial visit was arranged to VTU
Research center, Muddenahally. About 47 participants
attended the program.
The following faculty members have helped in conducting
practical sessions.
Dr.H.K.Rangavittal, Dr.V.Bharathi,Dr.Santhosh D.
Dr.R.N.Ravikumar, Dr. G. Saravanakumar, Sri.Sreekanth
N.V., Sri.G.Dilip Maruthi, Sri.Prabhu Swamy N.R.
Industrial Visit
25th July 2018The Department of Mechanical Engineering, arranged
industrial visit to Volvo truck division, Tavarekere, near
Hoskote on 25/07/2018 for 34 Non-teaching staff of
Mechanical Engineering from BMSCE, Bengaluru. The
group was led by Dr. Sathisha H.M, Asst Prof, Mech Engg,
along with Dr. Suhas BG, Asst Prof, Mech Engg. The group
visited assembly section and the process was briefed by
Miss. Shilpa, HR department, Volvo Trucks division.
Volvo was established in 1915 as a subsidiary of SKF, a ball
bearing manufacturer; however both the Volvo Group and
Volvo Cars regard the rollout of the company's first car
series, the Volvo OV 4, on 14 April 1927, as their
beginning. The Volvo Group is a Swedish multinational
manufacturing company headquartered in Gothenburg.
While its core activity is the production, distribution and
sale of trucks, buses and construction equipment, Volvo also
supplies marine and industrial drive systems and financial
services. In 2016, it was the world’s second largest
manufacturer of heavy-duty trucks.
Prof. Dr. Bheemsha Arya, Head of Mechanical Engineering
Department and Dr. Rudra Naik, supported the teaching and
non-teaching staff.
Department of Mechanical Engineering, BMSCE Page 1
News Letter – JULY 2018
News Letter – July 2018
Expert Lecture by Faculty
12th July 2018Dr. Shivashankar R. Srivatsa, Assistant Professor,
Department of Mechanical Engineering delivered an Invited
Expert Lecture on ‘Computational Techniques in Fracture
Mechanics’ in One-week Faculty Development Programme
on ‘Theoretical and Computational Mechanics-II’ at N. M.
A. M. Institute of Technology, Nitte, on 12th July 2018.
14th July 2018
Sri.Shashiraj, Asst. Professor, Department of Mechanical
Engineering was invited to deliver a talk in Faculty
Development Program on “Theoretical and Computational
Mechanics-II” held at NMAM Institute of Technology, Nitte
from 9th July to 14th July 2018, handling the hands on
sessions on ‘Finite Element Modeling of Thermal and
Computational Fluid Mechanics problems using ANSYS
Mechanical APDL and ANSYS WORKBENCH’ for Three
days of the one week program.
23rd July 2018
Sri. Prabhu Swamy N.R. , Asst. Professor, Department of
Mechanical Engineering was invited to deliver a lecture on “
Abrasive Water Jet Cutting” on 23rd July 2018 at Two weeks
Faculty Development Programme on “Advanced
Manufacturing” at BMSCE.
25th July 2018
Dr.G.Giridhara, Professor, Department of Mechanical
Engineering was invited to deliver a lecture on “Wear and
Wear Characteristics” on 25th July 2018 at Two weeks
Faculty Development Programme on “Advanced
Manufacturing” at BMSCE.
25th July 2018Dr.S.Srinivas, Associate Professor, Department of
Mechanical Engineering delivered an Invited Expert Lecture
on “RESEARCH IN ABRASIVE WATER JET CUTTING”
on 25th July 2018 at Reva University.
27th July 2018
Dr.Venkatesh T Lamani, Asst. Professor, Department of
Mechanical Engineering was invited to deliver a lecture on
“The Recent Advances in IC Engines-Research Trends &
Issues” at AICTE-ISTE Induction/Refresher Programme at
GM Institute of Technology, Davanagere on 27th July 2018.
31st July 2018
Sri.Devaraj K, Asst. Professor, Department of Mechanical
Engineering was invited to deliver a talk on LATEX
software at R.R Institute of Technology, Bengaluru.
Training / FDP/ Conference/ Meeting attended by Faculty
Faculty Programme Date Venue
Dr.R.N.Ravikumar
One Week
ReferesherProgramme on “
Design ofMachine
Elements”
02.07.2018
To 07.07.2018
Vidyavardhaka
College of
Engg.,Mysuru.
Department of Mechanical Engineering, BMSCE Page 2
News Letter – July 2018
Sri.Ramesh M
Chalkapure,Dr.J.Sharana
Basavaraj,Dr.R.N.Ravikumar,
Sri.G.Saravan Kumar,Sri.Rajesh P,
Sri.R.Suresh Kumar,Dr.Santhosh D.
Two weeks FDP
on “Advanced
Manufacturing”
16th – 27th
July 2018 BMSCE
Faculty Publications
Faculty Title of Paper Publication Details
Sri.Hussain
Pasha,
Sri.Rajesh P,
Dr.J.Sharana
Basavaraja
Reinforcement
Design and Crash
Analysis of
Medium Duty
Trucks for
Rollover Crash
Accidents
International
Journal of
Engineering
Research in
Mechanical & Civil
Engineering
(IJERMCE) Vol3,
Issue5, May 2018
ISSN (ONLINE)
2456-1290
Dr.Venkatesh
T Lamani
Combustion,
Performance, and
Tail Pipe
Emissions of
Common Rail
Diesel Engine
Fueled with Waste
Plastic Oil-Diesel
Blends
ASME transactions
Journal of Thermal
Science and
Engineering
Applications, with
IF 0.993
Sri.Ram Rohit
Vannarth,
Dr.K.Mallikha
rjun Babu,
Dr.P.Martin
Jebraj
Fusion and
Characterization of
Simarouba oil-
based Green
Magneto-
Rheological
(GMR) fluids
International
Conference at 27th
Nordic Rheological
Conference on 14th
June 2018 at
NTNU, Trondheim,
Norway.
Annual
Transactions of the
Nordic Rheology
Society, Vol 26,
2018
Training / FDP/ Conference/ Meeting attended by Technical Staff & Admin Staff
Staff Programme Date Venue
Sri. Vinayaka K.B.Ms. Sudha H.R.
One week SDP on “Professionalism &
Skill Development”
2nd – 7th, July2018
BMSCE
Sri.T.N.JagadeeshOne week SDP on “Advanced Computer
Training-Professional
16th -20th July
2018
DistrictTraining
Institute,Bangalore
Student Achievement
Student Title of Paper Publication Details
Sri.Hussain
Pasha, 1BM16MMD04
Reinforcement
Design and
Crash Analysis
of Medium Duty
Trucks for
Rollover Crash
Accidents
International Journal
of Engineering
Research in
Mechanical & Civil
Engineering
(IJERMCE) Vol3,
Issue5, May 2018
ISSN (ONLINE)
2456-1290
Training / FDP/ Conference/ Meeting attended by Student
Student Programme Date Venue
Thammaiah BR
17MSE14Prajwal H V
17MSE07Mahesh S
17MSE06Vikas B G
17MSE17Rakesh S
16MSE11Ranganath B M
16MSE12Sumanth S Athreya
17MSE13Soujanya E
17MSE10Gurusiddappa
Bagawati17MSE03
Chethanbabu H M17MSE02
Suhas K17MSE12
Mahesh J Hunakunti16MSE06
Pavan Joshi16MMD11
Two weeks FDP
on “Advanced
Manufacturing”
16th – 27th
July 2018 BMSCE
Departmental Meetings
Date &
TimeVenue Agenda
11.07.2018
10.30 A.M.MESH
1.Induction Program for I year
2. Finalization of I year course
Syllabus for the year 2018-19
21.07.2018
12.00 P.M.
HODs
Chamber
To discuss about disposal of the
scrap materials of the concerned
lab
25.07.2018
10.30 A.M.ML1
1.Preparations for Odd Semester
2018
2.Induction Programme for I year
3.Curriculum Revision for I year
30.07.2018
10.30 A.M.
HOD’s
Chamber
Finalization of Proposals & set
up CNC Machines & Robotics
Lab
Department of Mechanical Engineering, BMSCE Page 3
B. M. S. COLLEGE OF ENGINEERING
Department of Mechanical Engineering
Orientation Programme
For the students of 3rd, 5th and 7th Semester B. E., an
Orientation Programme consisting of a series of lectures
by eminent professors was arranged from 8th to 11th
August 2018.
8th August 2018
Guest Lecture by Prof. J. S. Rao, AICTE-INAE
Distinguished Professor and Chief Scientific Officer,
Altair India was organized on 8th August at 10 am. Prof
Rao delivered a lecture on the topic “21st Century
Simulation Based Engineering Science Approach”.
9th August 2018
Guest Lecture by Dr. V. Aswatha Ramaiah, Director,
Unique Consultants, Bengaluru, was organized on 9th
August 2018, on the topic "Self-Motivation and
Personality Development".
10th August 2018
Guest Lecture by Dr. L. Ravikumar, Professor,
Department of Mechanical Engineering, BMSCE, on the
topic “Outcomes Based Education” was organized on 10th
August 2018 at 10 am.
11th August 2018
Guest Lecture by Sri. Vinod Kumar K., Senior Scientist,
CSIR-National Aerospace Laboratories, Bengaluru was
organized on 11th August on the topic "Space &
Interplanetary Space Flights". These lectures were part
of Orientation Program for higher semester students of
Mechanical Engineering.
One-day Workshop
11th August 2018
One-day workshop on ‘Curriculum Revision, Outcomes &
Attainment’ was conducted by the Department of
Mechanical Engineering, BMSCE, on 11th August 2018 for
faculty of BMSCE. The workshop was sponsored by
TEQIP-III.
Prof. R. Suresh Kumar, Assistant Professor, Department
of Mechanical Engineering, BMSCE, was the Resource
person for the workshop. The workshop was attended
by about 50 faculty of the Department.
Expert Lecture by Faculty
6th & 7th August 2018
Dr. Venkatesh T. Lamani, Assistant Professor,
Department of Mechanical Engineering was invited to
deliver lecture on “CFD using flow 3D” at one-week Short
Term Training Programme at S. J. Polytechnic, Bengaluru
on 6th and 7th August 2018.
7th August 2018Prof. R. Suresh Kumar, Assistant Professor, Department
of Mechanical Engineering was invited to deliver an
Expert talk on ‘Universal Human Values’ in the Induction
Programme for students of B. E. First year on 7th August
at Guru Nank Dev Engineering College, Bidar.
10th August 2018
Dr. Ravi L., Asst. Professor, Department of Mechanical
Engineering was invited to deliver a lecture on ‘CFD
Using Flow 3D’ at One-week STTP for faculty of
Polytechnic and Engineering Colleges at S. J. Polytechnic,
Bengaluru on 10th August 2018.
TEQIP-III Twinning Programme:
Workshop Conducted6th – 10th August 2018
Department of Mechanical Engineering, B. M. S. College
of Engineering, conducted a ‘One-week Workshop on
CAD Modeling, MATLAB and ANSYS’ for Final and Pre-
final year students of FET – MJP Rohilkhand University,
under Twinning Programme of TEQIP-III from 6th to 10th
August 2018 at MJP Rohilkhand University, Bareilly,
Uttar Pradesh.
Department of Mechanical Engineering, BMSCE Page 1
News Letter – AUGUST 2018
News Letter – August 2018
TEQIP-III Twinning Programme:
Workshop Conducted
Four faculty from the Department of Mechanical
Engineering, viz., Dr. J. Sharana Basavaraja, Associate
Professor, Dr. Shivashankar R. Srivatsa, Assistant
Professor, Prof. Shashiraj, Assistant Professor, and Dr.
Santhosh D., Assistant Professor, delivered lectures and
training sessions as Resource persons for the ‘One-week
Workshop on CAD Modeling, MATLAB and ANSYS’.
The workshop was intended to provide knowledge about
fundamentals and applications Geometric modeling,
Finite Element Modeling & Analysis, and Numerical
Computations and simulation as applied to Structures in
Engineering. The program had lecture sessions,
software training sessions and hands-on practice
sessions addressing Modeling, Simulation and Numerical
Computations using SolidWorks, MATLAB and ANSYS. A
total of 77 students were trained in two groups during
the workshop.
Induction Program for I year Students
For the students who were admitted to First Year B. E.
for the Academic year 2018-19, an Induction Programme
was conducted by Department of Mechanical
Engineering from 27th to 30th August 2018. The
programme involved a series of academic activities
conducted by eminent people from Industry. Research
and Academia, and presentations by various Professional
bodies.
27th August 2018
The Programme started with welcome address to
fresher’s and presentation about Department activities
by Dr. Bheemsha Arya, Professor & Head, Department of
Mechanical Engineering.
It was followed by a Guest Lecture by Dr. Aswatha
Ramaiah, Director, Unique Consultants, Bengaluru, on
the topic ‘Formula for Success’, and a talk by
Ms. Meghana Hanumesh, Faculty, Unique Consultants on
the topic ‘Positive Attitude and Self-Motivation’.
Afternoon sessions had presentations on activities of the
Department student forum - Mechanical Engineering
Association (MEA), and presentation and visits to Propel
Lab.
28th August 2018
Guest Lecture by Dr. Ashok Shama Rao on the topic
‘Psychology & Engineering’ on 28th August at 10 am.
Guest Lecture by Mr. Gangadhar Sulkunte from 11.30 am
to 1 pm on the topic ‘How to be a better Engineer’
followed by Presentation about Professional Bodies.
29th August 2018
Guest Lecture by Dr. J. S. Rao, AICTE-INAE Distinguished
Professor and Chief Scientific Officer, Altair India, on 29th
August at 10 am.
Department of Mechanical Engineering, BMSCE Page 2
News Letter – August 2018
Induction Program for I year Students
29th August 2018
Followed by Guest Lecture by Sri. Bharath Kumar,
Alumni, on from 2.30 pm to 3.30 pm on the topic
‘Mechanical Engineer’s role in Industry'. The
programme ended with visit to Department laboratories
from 3.30 to 4.30 pm.
30th August 2018
Guest Lecture by Ms. Padma Hemanth, Unique
Consultants, Bangalore, on 30.08.2018 at 10.00 A.M. to
11.30 A.M. on the topic ‘Time Management’.
Guest Lecture by Smt. Suma Ravindra, Engineering
Manager, Herman Miller India, from 11.45 A.M. to 1.00
P.M. on the topic ‘Career Options available in the
Industries’.
Faculty Achievement
Sri. Madhav Murthy, Assistant Professor, Department of
Mechanical Engineering, presented his research paper
titled ‘Effect of Volume Fraction and Resin System on
Tensile, Compression and Flexural Strength of Electrical
Glass Fiber Reinforced Plastic Laminate’ in International
Conference on Manufacturing Science and Technology
(ICMST-2018) at Kuala Lampur, Malaysia held between
11th to 13th August 2018.
Training / FDP/ Conference/ Meeting
attended by Faculty
Faculty Programme Date Venue
Prof. Madhav Murthy
International
Conference on
Manufacturing
Science and
Technology
(ICMST 2018)
11th to 13th
Aug 2018
University of
Malaya,
Malaysia
Dr. S. M. Suresh
Visit to Institutes
as an Expert AICTE
Committee
Member
2nd and 3rd
Aug 2018
Medak and
Kammam
Dr. L. RavikumarPerformance
Auditor (TEQIP)
16th to 18th
Aug 2018
Baba Ghulam
Shah Badshah
Universitym
Rajouri, J & K
20th to 22nd
Aug 2018
Shri Mata
Vaishno Devi
University,
Katra, J & K
30th Aug to
1st Sep 2018
NIT, Srinagar,
Uttarakhand
Prof. Madhav MurthyISAMPE Bangalore
Chapter AGM31st Aug 2018 CSIR-NAL
Faculty Publications
Faculty Title of PaperPublication
Details
Prof. Madhav
Murthy
Effect of Volume Fraction
and Resin System on
Tensile, Compression and
Flexural Strength of
Electrical Glass Fiber
Reinforced Plastic
Laminate”
International
Conference ICMST
2018 at Kuala
Lampur, Malaysia,
Aug 2018
G. Dilip Maruthi,
Rashmi R.
Rashmith Bailoor
Rahul Athreya
Design and Fabrication of
Low cost all Terrain
Electric Wheelchair
Asia Pacific
Journal of
Research
G. Dilip Maruthi,
Rashmi R.
Adithya Y. Bangera
& Aniruddha Rao
Microstructure and
Elementary analysis of SS
304/434 for Solar Water
Heater applications
Shanlax
International
Journal of
Management
Student Publications
Name of Student Title of PaperPublication
Details
Rashmith Bailoor
Rahul Athreya
(VII Semester BE)
Design and Fabrication of
Low cost all Terrain
Electric Wheelchair
Asia Pacific
Journal of
Research
Adithya Y. Bangera
& Aniruddha Rao
(VII Semester BE)
Microstructure and
Elementary analysis of SS
304/434 for Solar Water
Heater applications
Shanlax
International
Journal of
Management
Social Responsibility
1st –14th August 2018
Three Blind persons were provided financial help
through job of knitting 44 Nos. of Wire Chair (S-type).
Department of Mechanical Engineering, BMSCE Page 3
News Letter – August 2018
Departmental Meetings
Date & Time Venue Agenda
01.08.2018
10.30 A.M.MESH Preparations for VTU Visit
03.08.2018
11.00 A.M. MESH
Conduction of Orientation program
for Higher Semester 08.08.2018 to
11.08.2018
03.08.2018
3.30 P.M.
HODs
Chamber
Procurement of CNC Machines for the
proposed CNC Machines and Robotics
Lab
06.08.2018
2.30 P.M.
HODs
Chamber
To discuss Lab component of the EME
Course.
13.08.2018
3.00 P.M.
HODs
ChamberCurriculum Revision
16.08.2018
2.30 P.M.
HODs
Chamber
To finalize EME Syllabus & Lab
Component
18.08.2018
11.00 A.M.MESH 20th BOS Meeting
20.08.2018
2.30 P.M.MESH To Finalize EME & EED Syllabus
21.08.2018
2.30 P.M.MESH To Finalize EME & EED Syllabus
23.08.2018
2.30 P.M.MESH Induction Program for I year Students
29.08.2018
10.30 A.M.HODs
ChamberDept. Academic Audit
Department of Mechanical Engineering, BMSCE Page 4
B. M. S. COLLEGE OF ENGINEERING
Department of Mechanical Engineering
PHASE SHIFT 2018
15th & 16th September 2018
Department of Mechanical Engineering organized four
technical events and a Guest Lecture as part of Phase
Shift – 2018, the technical fest of BMSCE. The events
were conducted in collaboration with Industrial partners
viz. EduCAD.
Event : SITUATION
Participants were given a real time situation on first day.
They had to present the solution to it on second day of
event. The teams were judged based on their unique
solutions to problem, based on their presentation skills
and style of expressing things.
Faculty coordinator: Dr. Santosh Doreswamy
Student coordinators: Mahesh Kumar S. & Nikhil V. Giri
Judge for the event: Dr. B. S. Suresh
Winners: 1st place: Varun P. Rao and Siddesh B. Shankar
2nd place: Samartha R. and Prajwal Kalame
Event : EnCASE IT 2.0
Participants were given a set of part drawings of a
robotic arm. The task involved creation of geometric 3D
model and developing the assembly simulating the
motion of the arm. The teams were judged based on time
taken to complete the task and ability to show the
mechanism motion simulation. A total of 11 teams
participated in the event.
Faculty coordinator: Dr. Shivashankar R. Srivatsa
Student coordinator: N. Prajwal & Prathik M. P.
Judge for the event: Dr. Mahadevagouda G. Patil
Winner: 1st place: Angshuman B. & Abhishek K.
2nd place: Divyam S.
Event: ROBO WARS
Robots battle among themselves for the survival within
the arena. Each team had to compete against every other
team. Participants had to get their own robots and
materials. Robots unable to move even after 30 seconds
after damage loses are eliminated. Maximum dimensions
of the robot was 2ft x 1ft x 1ft. Maximum weight was 8
kgs. No fire or explosives were allowed to be used as
defence in the competition.
Total number of participating teams: 7
Format of the competition:
Phase 1: Round-robin phase - each team fought with the
rest of the teams. The team that gets pushed out of the
arena loses the fight. Also, the vehicle that becomes
inactive for more than 30 seconds loses the fight. Bout
time is 5 minutes. Winning team gets 1 point. Losing
team get none. If there is a tie, both teams get 0.5 points
each.
Phase 2: Final phase - top two teams from phase 1 clash
against each other. The above rules hold good for this
phase too. Winning team is the final winner of the
competition.
Faculty coordinator: Prof. Narahari
Student coordinator: Pratith N. Shenai & Pavas Anand
Judge for the event: Prof. Devaraj K.
Winner: 1st place: Team MVJ College of Engineering
(Prize money of 5,000/)
2nd place: Team UVCE (Prize money of 3,000/-)
Summary of the event:
Department of Mechanical Engineering, BMSCE Page 1
News Letter – SEPTEMBER 2018
News Letter – September 2018
Event : SINGULARITY
The event singularity was a two-day event. It started at
12 pm the first day with about 7 teams (14 students)
participating in round 1. They had to solve a set of
subjective and objective questions regarding propulsion,
aerodynamics, and space-science.
4 teams progressed to the next round which happened
the following day at 11 am. In this, they had to
theoretically construct a suitable satellite and present
the reasons they did so. The rubrics are prepared to
evaluate the participants -Relevance of Contribution to
topic under discussion.
Faculty Coordinator: Mr. Raghu Yogaraju
Student Coordinators: Rohan S. Prajwal & J. Haritsa
Guest Lecture
15th September 2018
A Guest Lecture on the topic "Talk on Interplanetary
Missions” was arranged by Mr. Naravi Srinivasa Hegde,
Mission Director, Chandrayaan-1, ISRO, Bengaluru, in the
department from 1.00 P.M. to 4.00 P.M. in MESH.
The speaker highlighted the importance of Chandrayaan-
1 mission. The way the mission was carried out and the
achievements from the mission. It gave a glimpse of
opportunities ahead for the students and the necessary
skills to be acquired.
Faculty coordinator: Dr. Suhas B.G.
Student coordinators: Manikanta & Prajwal K.
Teacher’s Day 2018
27th September 2018
Department of Mechanical Engg. coordinated the
Teacher’s Day 2018 event held on 27.09.2018. The
Employees of BMS institutions, who have completed 25
years of service in the BMS Institution, around 16 Nos.
belonging to BMS College of Engineering, BMS Evening
College, BMS College for Women & BMS Law college
were felicitated during the function. Dr. Gururaj Karajagi
was the Chief Guest of the function. Dr. B. S. Ragini
Narayan, Donor Trustee & Member Secretary, BMSET,
Dr. P. Dayanand Pai, Chairman, BOG-BMSCE graced the
function. Dr. B. V. Ravishankar, Principal, Dr. Bheemsha
Arya, HOD, Mechanical Engg., were present.
Department of Mechanical Engineering, BMSCE Page 2
News Letter – September 2018
Training / FDP/ Conference/ Meeting
attended by Faculty
Faculty Programme Date Venue
Dr. L. Ravikumar
Sri. K. Ramesh
Indian Technology
Congress
(ITC 2018) &
Satellite Program
05.09.2018 &
06.09.2018
NIMHANS
Convention
Centre,
Bengaluru
Dr. S. M. Suresh
Scrutiny Committee
as an expert
member to verify
documents related
to PGDM course
05.09.2018
AICTE South
Central Region-
Hyderabad
Sri. C. K. Chandrababu
Sri. G. Saravana Kumar
Sri. Sreekanth N. V.
Sri. RamRohith V.
Indian Technology
Congress
(ITC 2018)
05.09.2018 &
06.09.2018
NIMHANS
Convention
Centre,
Bengaluru
Dr. Bheemsha Arya
Dr. L. Ravikumar
4th world Summit
Accreditation
(WOSA-2018)
07.09.2018 &
08.09.2018
Dr. Ambedkar
International
Centre,
New Delhi
Sri. C. K. Chandra Babu
Dr. Anil Chandra A.R.
8th International
Conference &
Exhibition on
Additive
Manufacturing
Technologies
07.09.2018 &
08.09.2018
Hotel Lalith
Ashok,
Bengaluru
Sri. B. Sudarshan
Symposium on
Classical and
Computational Aero
Elasticity
10.09.2018 to
12.09.2018
IISc,
Bengaluru
Dr. S. M. Suresh Scrutiny Meeting 11.09.2018
AICTE Southern
Region,
Hyderabad
Dr. L. Ravikumar“Review of
Expenditure Status” 17.09.2018
VTU,
Belgaum
Sri. Madhav Murthy
To attend Annual
general Meeting of
ISAMPE
28.09.2018
HAL Convention
Center,
Bengaluru
Dr. Rudra Naik
Dr. Tataram K. Chavan
Dr..V. Bharathi
Prof. R. Suresh Kumar
Visit to CREST 25.09.2018 NIE, Mysuru
Faculty Publications
Faculty Title of Paper Publication Details
Sri. Ugrasen G.
Estimation and
comparison of Welding
Performances using
MRA and ANN in
Pulsed Gas Metal Arc
Welding (P-GMAW)
International Conference
on Mechanical
Engineering & Allied
Sciences on 14th & 15th
September 2018
Shri Matha Vaishno Devi
University, Katra, J & K
Faculty – Extra Curricular Activity
Yakshagana Performance by Prof. Shashiraj, Assistant
Professor, Dept. of Mechanical Engineering, BMSCE
Date: 02 Sept 2018, Played the role of Lord VISHNU in Yakshagana
prasanga-JALANDHARA KALAGA
Venue: ADA Rangamandira, JC Road, Bengaluru.
Date: 13 Sept 2018, Played the role of LAKSHMANA in Yakshagana
prasanga-ATHIKAYA KALAGA
Venue: Sri Siddivinayaka Temple, Hattiyangadi,
Kundapura Taluk, Udupi district.
Date: 14 Sept 2018, Played the role of Lord ESHWARA in Yakshagana
prasanga-DHAKSHA YAJNA
Venue: Govt.Primary School Mathikai, Hosanagara Taluk, Shimoga
district.
Date: 15 Sept 2018, Played the role of Lord ESHWARA in Yakshagana
prasanga-DHAKSHA YAJNA
Venue: Sri Gopolakrishna Temple, Uppinakudru, Kundapura Taluk,
Udupi district.
Date: 16 Sept 2018, Played the role of LAVA in
Yakshagana prasanga-SEETHA VIYOGA
Venue: Govt. Primary School Sampekatte,
Hosanagara Taluk, Shimoga district.
Department of Mechanical Engineering, BMSCE Page 3
News Letter – September 2018
Departmental Meetings
Date & Time Venue Agenda
01.09.2018
11.00 A.M.MESH
To Finalize EME & EED Syllabus & PG
Syllabus
17.09.2018
10.45 A.M.MESH
Submission of a revised Course
outcomes (CO) for EME Syllabus
20.09.2018
10.30 A.M.MESH EED Workload
26.09.2018
2.30 P.M.MESH
To discuss and finalize the scheme of
PG MMD and MSE for the upcoming
semester
29.09.2018
10.45 A.M.MESH
MEA Meeting
1.Planning of MEA activities for
the Current Semester
2. MEA orientation program to
3rd Sem Mechanical Engg.
Students.
Department of Mechanical Engineering, BMSCE Page 4
B. M. S. COLLEGE OF ENGINEERINGDepartment of Mechanical Engineering
MEA Orientation Programme
6th October 2018
Department of Mechanical Engineering, BMSCE in coordination
with Mechanical Engineering Association (MEA) conducted an
orientation program to the engineering students of 3rd
semester for the academic year 2018-19. The program was
held on 6th October 2017 at 11 a.m. in B. M. S. Auditorium,
BMSCE.
Mr. Pramod Nataraj, Organizing secretary, DISHA Bharat,
Bengaluru, was the Chief Guest of the function. Dr. Bheemsha
Arya, Professor and Head, Department of Mechanical
Engineering, and Dr. T. K. Chavan, Chief faculty Coordinator-
Mechanical Engineering Association, Mr. Diwakar – MEA
student coordinator representative were present on the dais.
Mr. Pramod Nataraj, the Chief Guest, delivered a talk to
motivate the budding engineers. In the talk, he explained the
important qualities of a good student. The talk also included
the glimpse on path of success.
More than 200 students and Faculties of Mechanical
Engineering and other departments attended the event.
Guest Lecture
6th October 2018
A Guest lecture by Sri. Darshan S. N., Design Engineer,
Quest-Global, Bangalore, was organised on 06.10.2018
under TEQIP-III on the topic "Geometric Dimensioning &
Tolerancing". The lecture was intended to give
comprehensive introduction on how to apply, read &
understand technical drawings, and employ Geometric
Dimensioning & Tolerancing.
The lecture covered the topics of terminologies,
Standards of GD&T. Concepts of Datums, Symbols,
Geometric tolerance zones, modifiers as applied during
inspection were discussed. Functional aspects of GD&T
using standard drawings as applied to various stages of
product development such as design, manufacturing, and
inspection were discussed in detail.
The participants also got opportunity to interact with the
expert to gain knowledge on industry perspective of use
of GD&T in product lifecycle management.
About 110 students of 5th semester B. E. and about 10
faculty of Department of Mechanical Engineering
attended the lecture. The event was coordinated by
Dr. Vardhaman S. Mudakappanavar & Dr. Shivashankar
R. Srivatsa, faculty from Mechanical Engineering
Department and supported by TEQIP-III.
Guest Lecture
12th October 2018
A Guest lecture by Dr. M. K. Laha, Associate Professor,
Aerospace Engineering, Indian Institute of Technology,
Kharagpur, was organised on 12.10.2018 under TEQIP-
III in Mechanical Engineering Seminar Hall on the topic
"An historical perspective of the development of
Aircraft". The event was organized by the Mechanical
Engineering Association (MEA), Department of
Mechanical Engineering, BMSCE under the support of
TEQIP-III.
Dr. M. K. Laha has operated with defense industries for
the development of indigenous aircrafts. His areas of
expertise are Dynamics, Flight mechanics, Computational
Fluid Dynamics and Aerodynamics. In the talk, which
lasted for about one hour, Dr. Laha gave an overall
insight of the development of aircrafts over the past
several decades. He covered the advances starting from
the discovery of balloons and the work of Wright
brothers. He also gave an insight into the basics of
mechanics involved in the flight technology and few
specific terminologies related to the field. He showed
interesting photographs and video clips of different
aircrafts and their specific technological features. He also
covered the introductory part of engines, performance
and the related developments.
Department of Mechanical Engineering, BMSCE Page 1
News Letter – OCTOBER 2018
News Letter – October 2018
The talk was attended by about 120 students of UG 1 st
year Aerospace engineering and 5th semester Mechanical
Engineering along with the faculties of Mechanical
Engineering.
Training / FDP/ Conference/Symposium/
Meeting attended by Faculty
Faculty Programme Date Venue
Dr. Tataram K. Chavan,
Sri. H. R. Prakash,
Sri. Madhav Murthy,
Sri. Sreekanth N.V,
Sri. Arjun C.C.,
Sri. G. Dilip Maruthi,
Smt. Rashmi R.,
Dr. Shivashankar R.
Srivatsa
3D Scanner Training
as a part of the
Commissioning in
MMM Lab
3rd to 10th
October
2018
(2 to 5
pm)
BMSCE
Dr. S. Srinivas
Presented a paper on
"Machining
Capabilities of
Abrasive Waterjet on
Stainless Steel-304"
at International
Conference on Green
Trends in Mechanical
Engineering Sciences
4th
October
2018
Malnad
College of
Engineering,
Hassan,
Karnataka
Dr. L. Ravikumar
Attended Selection
Committee for
Promotions as a
subject Expert
5th
October
2018
UPES,
Dehradun
Sri. B. Sudarshan
Attended Aerospace
Research Students
Symposium 2018
(AERES 2018)
10-12
October
2018
Aerospace
Engg., IISc,
Sri. Madhav Murthy
Attended Two-day
Competency
Development
Program
27th and
28th
October
2018
Pegasus
Academy &
Consulting,
Srirampura
Village, Jakkur
Post,
Bengaluru.
Faculty Publications
Faculty Title of Paper Publication Details
Sri. B. Sudarshan
Heat flux variation
by a forward facing
cavity in hypersonic
flow
National Symposium
(AERES 2018)
Vijayakumar
Badadani,
T. S. Sriranga,
Shivashankar R.
Srivatsa
Analysis of
Uncertainty in
Digital Image
Correlation
Technique for Strain
Measurement
Elsevier-Materials
Today, Vol. 5, Issue 10,
Part-1, 2018, pp. 20912 -
20919.
http://doi.org/10.1016/
j.matpr.2018.06.479
Vinod Laxman
Hattalli,
Shivashankar R.
Srivatsa
Wing Morphing to
Improve Control
Performance of an
Aircraft - An
Overview and a
Case Study,
Elsevier-Materials
Today, Vol. 5, Issue 10,
Part-1, 2018, pp. 21442 -
21451.
http://doi.org/10.1016/
j.matpr.2018.06.553
Training Conducted for Faculties
3rd -10th October 2018
Training on the 3D Scanner in Mechanical
Measurements & Metrology Lab
A training was conducted for commissioning of the state
of the art non-contact based 3D-Scanner which will serve
the UG and PG students of the upcoming batches for
Mechanical and Industrial Engineering and management
students.
The training was conducted in the month of September
and October in two slots for the faculty handling
Measurements and Metrology laboratory in the
respective departments. The training included
introduction to the 3D Systems Control-X software which
is used globally for measurement confirmations and
hardware training of the Poland based 3D Scanner. This
equipment was bought under the TEQIP-III funding.
The training was successful with fourteen faculties and
one non-teaching staff nominated by the heads of the
department for the training.
29th – 31st October 2018
A three days training on “Hydraulics and Pneumatics”, as
a train the trainer’s programme was conducted by
Rexroth India Ltd from October 29th to 31st, 2018 at
Mechatronics Lab, Machine Shop, Dept of Mechanical
Engineering, BMSCE. Mr. Santhosh, Mrs. Chitranga Bhatt
and Mr.Milind had provided the training on Hydraulics,
Pneumatics, Electro-hydraulics & pneumatics and PLCs.
News Letter – October 2018
A total of 12 participants including teaching faculties
have attended it. Hands-on training on various hydraulic
and pneumatic circuits was given. PLC circuits and logics
& its interface with hardware was the important part of
this training programme.
Faculty Achievement
4th October 2018
Dr. S. Srinivas, Associate Professor, Department of
Mechanical Engineering chaired a technical session at
International Conference on Green Trends in Mechanical
Engineering Sciences at Malnad College of Engineering,
Hassan, Karnataka, on 4th October 2018.
Sri. B. Sudarshan, Assistant Professor, Department of
Mechanical Engineering chaired Session-7 of ‘Aerospace
Research Students Symposium-2018 (AERES 2018)‘
organized by the Department of Aerospace Engineering,
Indian Institute of Science from 10-12 October 2018.
Sri. B. Sudarshan, Assistant Professor, Department of
Mechanical Engineering has been awarded First prize for
the best student presentation for paper titled “Heat Flux
variation by a forward cavity in a hypersonic flow”
presented at the Aerospace Research Symposium 2018
(AERES 2018) conducted by the Department of
Aerospace Engineering, Indian Institute of Science,
Bengaluru, during October 10-12, 2018.
Faculty – Extra Curricular Activity
Yakshagana Performance by Prof. Shashiraj, Assistant
Professor, Dept. of Mechanical Engineering, BMSCE
Date: 13 Oct 2018, Played the role of Lord VISHNU in Yakshagana prasanga-
JALANDHARA KALAGA, Venue: Sri Prasanna Chandrashekhara Ashrama,
Andrahalli, Magadi road, Bengaluru.
Date: 26 Oct 2018, Played the role of LAVA in Yakshagana prasanga: KUSHA-
LAVA, Venue: Udayabhanu Kala Sandha, Gavipuram, Bengaluru.
Departmental Meetings
Date &
TimeVenue Agenda
03.10.2018
10.45 A.M.
HODs
Chamber
Procurement of Air Compressor for
CMM Requirement
04.10.2018
10.45 A.M.
HODs
Chamber
Approval of Alternate Assessment
Tool
16.10.2018
3.00 P.M.
HODs
Chamber
Shifting of HMT Lab, Design Lab &
Mechatronics Lab from Electronics
block to Architecture Dept. III Floor,
ME Block
22.10.2018
2.30 P.M.MESH EED Course CIE-1 Reg.
Department of Mechanical Engineering, BMSCE Page 3
B. M. S. COLLEGE OF ENGINEERING
Department of Mechanical Engineering
Expert Lecture by Faculty
13th November 2018
Sri. Madhav Murthy, Assistant Professor,
Department of Mechanical Engineering delivered
an Expert talk on ‘Polymer Composites’ at Sairam
College of Engineering, Anekal, Bengaluru, on 13th
November 2018.
22nd November 2018
Dr. L. Ravikumar, Professor, Department of
Mechanical Engineering, BMSCE, served as a
resource person in the workshop on “Effective
preparation of equity action plan” conducted by the
SPIU, Karnataka on 22nd November 2018.
Guest Lecture
23rd November 2018
A Guest Lecture by Ms. Soumya Anand, Financial
Consultant, on the topic ‘Financial Planning’ was
organised on 23-11-2018 at 3 pm for the benefit of
7th semester students. The aspects of financial
preparation savings, and investment were covered
in the talk. The talk was coordinated by Mr.
Madhava Murthy, Assistant Professor, Department
of Mechanical Engineering. The talk was attended
by about 50 students and few faculties of
department.
Training / FDP/ Conference/Symposium/
Meeting attended by Faculty
Faculty Programme Date Venue
Dr. S. M. Suresh
Expert member
of the Scrutiny
Committee
13-11-2018
AICTE South
Western
Region
Trivandrum
Dr. L. Ravikumar
Inaugural
function on
Institution
Innovation
Council (IIC)
21-11-2018AICTE HQs
New Delhi
Dr. H. K.
RangavittalBOE Meeting 22-11-2018
MSRIT,
Bengaluru
Sri. K.
VeerabhadrappaBOE Meeting 27-11-2018
Dr.AIT,
Bengaluru
Faculty Achievement - Ph. D. Awarded
Department of Mechanical Engineering
congratulates Dr. G. Saravanakumar, Assistant
Professor, Dept. of Mechanical Engineering, BMSCE,
for being awarded Doctor of Philosophy (Ph.D.)
degree.
Title of thesis: “Temperature Effect on stiffness and
Damping Characteristics of Magnetorheological
Fluids used as External Damping Medium”
University: Visvesvaraya Technological University,
Belagavi.
Department of Mechanical Engineering
congratulates Dr. Ugrasen G, Assistant Professor,
Dept. of Mechanical Engineering, BMSCE, for being
awarded Doctor of Philosophy (Ph.D.) degree.
Title of thesis: “Estimation and Comparison of
Machining performances in wire electric discharge
machining using MRS, GMDH and ANN”
University: Visvesvaraya Technological University,
Belagavi.
Department of Mechanical Engineering, BMSCE Page 1
News Letter – NOVEMBER 2018
News Letter – November 2018
Faculty – Extra Curricular Activity
Yakshagana Performance by Prof. Shashiraj,
Assistant Professor, Dept. of Mechanical
Engineering, BMSCE.
Date: 24 Nov 2018, Played the role of Lord ESHWARA in
Yakshagana prasanga - DAKSHA YAJNA
Venue: Sri Vijaya Vittala School, Sarasvathipuram,
Mysuru.
Departmental Meetings
Date & Time Venue Agenda
02.11.2018
12.30 pmMESH
To Discuss about the
Vickers Hardness Tester
available at the
Laboratory
05.11.2018
10.45 amMESH
Preparation of NBA-SAR
M.Tech. (MSE)
27.11.2018
3.30 pmMESH
To discuss performance in
Physics of PD Section
students.
30.11.2018
10.45 am
Department
OfficeIMTEX-2019
Page 2 Department of Mechanical Engineering, BMSCE
B. M. S. COLLEGE OF ENGINEERINGDepartment of Mechanical Engineering
Interaction
4th December 2018
Dr. Vidya Sundararajan, Head, Strategic Planning and
Human resource Development Division, Indira Gandhi
Centre for Atomic Research, Department of Atomic
Energy, Govt. of India, visited department of Mechanical
Engineering and had an interaction with 5th semester
students on the topic 'Nuclear Energy- Challenges and
opportunities.'
This interaction also provided a platform for HOD of the
department and the Placement cell coordinators to
discuss regarding the internship, job and higher studies
opportunities available for the students at IGCAR .
Alumni Day
15th December 2018
Seventh Annual Alumni Day was celebrated on Saturday,
15th December 2018. Sri M. B. Pranesh, IAS (BMSCE Class of
1967 Electrical) was the chief guest. The event was
presided by Dr. P. Dayananda Pai, Trustee, BMSET,
Chairman, BMSCE, & Honorary President. Dr. B. S. Ragini
Narayan, Donor Trustee & Member Secretary, BMSET,
Honorary Member & Sri. Gautam K., Honorary Member, Dr.
B. V. Ravishankar, Principal, BMSCE, Dr. Ravishankar
Deekshit, Vice Principal, Dr. J. Sharana Basavaraja,
Associate Professor, Department of Mechanical Engg.
Alumnus 1995 (Mechanical), Secretary, Dr. Bheemsha Arya,
HOD, Department of Mechanical Engg. were present.
The following students of Mechanical Engg. (2017-2018)
were awarded with Alumni Scholarship.
Sl.No. USN NAME
1 1BM17ME115 RAVI KUMAR
2 1BM16ME194 AASHA G C
3 1BM15ME102 NIKIL JOHNSON
4 1BM17MMD10 NITHIN B S
5 1BM17MSE17 VIKAS B G
Training / FDP/ Conference/Symposium/
Meeting attended by Faculty
Faculty Programme Date Venue
Dr. L. Ravikumar EEAS Meeting 06.12.2018NBA Office,
New Delhi
Dr. J. Sharana
Basavaraja
TRIBOINDIA-2018 an
International
Conference on
Tribology for
Presentation of his
Technical Paper
Titled “ Study of
Effect of Seal Profile
on Leakage flow rate
in a labyrinth seal
using Computation
Fluid Dynamics (CFD)
analysis”
13.12.2018
to
15.12.2018
Veermata
Jijabai
Technical
Institute,
Mumbai
Sri. R. Suresh Kumar
To attend one week
FDP on Machine
Learning: Techniques
and Tools
17th – 21st
December
2018
JSS Academy
of Technical
Education,
Bengaluru
Dr. Rudra Naik
Dr. Tataram K
Chavan
Sri. H. R. Prakash
Dr. V. Bharathi,
Sri. Madhav
Murthy,
Sri. Sreekanth N.V,
Sri. Arjun C.C.
Sri. G. Dilip Maruthi,
Smt. Rashmi R
Dr. Anil Chandra A.
C.
CMM Training
10th – 22nd
December
2018
BMSCE,
Bengaluru
Department of Mechanical Engineering, BMSCE Page 1
News Letter – DECEMBER 2018
News Letter – DECEMBER 2018
Prof. C. K. Chandra
Babu
One-day Workshop
on 3D Printing18-12-2018
Concord
Hotel,
Bengaluru
Dr. G. Giridhar VTU LIC Visit
26-12-2018
&
27-12-2018
Faculty Publications
Faculty Title of Paper Publication Details
Dr. J. Sharana
Basavaraja,
Rajesh P.
“ A Study on
Effect of Seal
Profile on Leakage
flow rate in a
labyrinth seal
using Computation
Fluid Dynamics
(CFD) analysis”
TRIBOINDIA-2018
13th -15th December
2018
An International
Conference on
Tribology at Veermata
Jijabai Technical
Institute, Mumbai
Sri. Madhav Murthy
Impact of
Constraint
Conditions and
Cutouts on Natural
Frequency of Glass
Fibre Reinforced
Plastic Composite
International Journal
of Engineering
Materials and
Manufacture ( 2018)
3(4) 200-207 https://
doi.org/10.26776/ije
mm.03.04.2018.04
Dr. Venkatesh T.
Lamani,
Dr. Ravi L., Dr.
Bheemsha Arya
CFD Study of blood
flow in carotid
artery
Proceedings of the 7th
International & 45th
National Conference
on Fluid Mechanics &
Fluid Power (FMFP)
December 10-12,
2018, IIT Bombay
Ugrasen G.
Investigation on
Mechanical
Behavior of Hot
Rolled A17075-
TiB2 In-situ Metal
Matrix Composite
ELSEVIER
Materials Today:
Proceedings 5 (2018)
25605-25614
Training Conducted for Faculty and Staff
10th - 22nd December 2018
The renovated Metrology & Measurements Laboratory
along with the newly commissioned Coordinate
Measuring Machine facility was inaugurated on Monday,
10-12-2018 at 11.00 A.M. by Dr. B. V. Ravishankar,
Principal, BMSCE. Hands-on training was scheduled for
two weeks to the faculty and staff of Mechanical Engg.
and IEM departments.
Training attended by Technical Staff
Technical Staff Programme Date Venue
Sri. Praveen N,
Sri. Dandapani S,
Sri. Babu S,
Sri. Naveen Kumar V
CMM Training
10th – 22nd
December
2018
BMSCE,
Bengaluru
Faculty Achievement
Dr. J. Sharana Basavaraja, Associate Professor, Department of
Mechanical Engineering was invited to be Session Chair at
“TRIBOINDIA-2018- An International Conference on Tribology”
organized by VJTI, Mumbai from 13th-15th December 2018.
Faculty – Extra Curricular Activity
Yakshagana Performance by Prof. Shashiraj, Assistant
Professor, Dept. of Mechanical Engineering, BMSCE
Date: 08 Dec 2018, Played the role of ARJUNA in Yakshagana prasanga-THAMRADWAJA KALAGA
Venue: Karnataka Vidhyavardhaka Sangha, Dharawad
Date: 09 Dec 2018, Played the role of KRISHNA in Yakshagana prasanga-
JAMBAVATHI KALYANA
Venue: Chindodi Leela Auditorium, Belgaum
Student Publications
Student Title of Paper Publication Details
Mr. Lochan
Upadhyay,
Mr. Pranish Bhuju,
Mr. Sagar Pandit,
CFD Study of blood
flow in carotid
artery
Proceedings of the 7th
International & 45th
National Conference
on Fluid Mechanics &
Fluid Power (FMFP)
December 10-12,
2018, IIT Bombay
Aprameya C R
“ A Study on Effect
of Seal Profile on
Leakage flow rate
in a labyrinth seal
using Computation
Fluid Dynamics
(CFD) analysis”
TRIBOINDIA-2018
an International
Conference on
Tribology at Veermata
Jijabai Technical
Institute, Mumbai
Training / FDP/ Conference/Symposium/
Meeting attended by Student
Student Programme Date Venue
Mr. Lochan
Upadhyay
International and 45th
National Conference
on Fluid Mechanics &
Fluid Power(FMFP)
10-12
December
2018
IIT,
Bombay
Departmental Meetings
Date &
TimeVenue Agenda
06-12-2018
10.45 A.M.
HODs
ChamberBOE Meeting
News Letter –December 2018
19-12-2018
2.45 P.M.
HODs
Chamber
Condonation of Shortage of
Attendance
31-12-2018 MESH
1.Subject Allotment for Even Semester
2018-19
2.Preparation of Scheme
( III-VIII Semester )
Department of Mechanical Engineering, BMSCE Page 3
Department of Mechanical Engineering, BMSCE Page 1
B. M. S. COLLEGE OF ENGINEERING Department of Mechanical Engineering
IMTEX -2019
24th – 30th January 2019
Department of Mechanical Engineering participated in
IMTEX-2019 exhibition held at BIEC, Bengaluru from
24th to 30th January 2019. The following faculties
represented the department in the exhibition. The
exhibition helped faculty to enhance industry
collaborations in the field of Design and manufacturing
field.
Date Faculty who represented the Department
24/01/2019
Dr. Bheemsha Arya, Dr. M. Ramachandra,
Dr. Srinivas S., Dr. Rudra Naik,
Dr. Vinod C. Aralimatti
25/01/2019 Dr. Ravi L., Dr. Venkatesh T. Lamani
26/01/2019 Dr. Santhosh D., Dr. Ugrasen G.
27/01/2019 Prof. Narahari, Dr. Anil Chandra A. R.
28/01/2019 Prof. G. Dilip Maruthi, Prof. Rashmi R.
29/01/2019 Prof. Kiran Kumar U., Dr. Raghu Yogaraj
30/01/2019 Sri. Sreekanth N.V & Sri.E.Suresh
Training / FDP/ Conference/Symposium/
Meeting attended by Faculty
Faculty Programme Date Venue
Dr. K. Guruprasad
To visit college as an
expert member of
NBA
11th to 13th
Jan 2019
Dr. S. M. Suresh To conduct EVC 21st & 22nd
Jan 2019
AICTE South
Central Region,
Hyderabad
Sri. E. Suresh
Sri. Ramesh M.
Chalkapure
One-week
Product Design and
Innovation Workshop
2019
21st to 25th
Jan 2019
University
Visvesvaraya
College of
Engineering,
Bengaluru -01
Dr. S. M. Suresh
Expert Member for
Standing Appeal
Committee
25.01.2019
&
28.01.2019
JNTU,
Kukkatppally,
Hyderabad &
AICTE Regional
Office,
Trivandrum
Region
Dr. L. Ravikumar
TEQIP-III Project
Progress review
meeting
27th & 28th
Jan 2019 BEC, Bagalkot
Faculty Publications
Faculty Title of Paper Publication Details
K. Y. Chethana,
Y. S. Rammohan,
M. G. Patil
&
Lokesh C. Reddy
Influence of
MWCNT
addition on
mechanical
properties of
density graded
E-glass fiber
reinforced
polyester resin
composites
AIP Conference
Proceedings 2057,
020040(2019)
https://doi.org/10.
1063/1.5085611
Training attended by Technical Staff
Technical Staff Programme Date Venue
Sri Mallesh R.
Sri. Krishnamurthy G.
Sri. Rajendra Prasad T.
V.,
Sri. SrIkanth S.
SDP on
“Laboratory
Record
Maintenance & Work Ethics”
3rd-5th
January
2019
SJB Institute
of
Technology,
Kengeri,
Bengaluru
Faculty Achievement
An R & D Project titled "Optimization of Heat and Mass
Exchanger used in the Indirect Evaporative cooling
system working on Maisotsenko Cycle" proposed by
Dr. Rudra Naik, Professor, Department of Mechanical
Engg. BMSCE, has been recommended by the
Empowerment and Equity Opportunities for Excellence
in Science (SERB), New Delhi, and approved for funding
of Rs.22 Lakhs for a period of 3 years.
Dr.Y.S.Rammohan, Associate Professor, Dept. of
Mechanical Engineering was conducted the Academic
Audit of Mechanical Engineering Department of JSS
Academy of Technical Education College on 31st January,
2019.
Faculty Additional Responsibility
Dr. J Sharana Basavaraja, Associate Professor,
Department of Mechanical Engineering assumed charge
News Letter – JANUARY 2019
Page 2 Department of Mechanical Engineering, BMSCE
as Assistant Training & Placement Officer, BMSCE, on
10.01.2019, Thursday.
Dr. Vardhaman S. Mudakappanavar, Assistant Professor,
Department of Mechanical Engineering assumed charge
as Secretary-1, BMSET Hostel (IH) on 11-01-2019.
Dr. M. G. Patil, Assistant Professor, and
Dr. K. Veerabhadrappa, Assistant Professor, Department
of Mechanical Engineering assumed charge as Warden, ,
BMSET Hostel.
Faculty - Final Ph.D Viva Voce
12th January 2019
Ph. D. viva-voce of Mr. Prabhu Swamy N. R.
(USN:1BM11PMN03) under the guidance of Dr. S
Srinivas, Associate Professor, Department of Mechanical
Engineering, BMSCE was held on 12/01/2019 at
Department of Mechanical Engineering, BMSCE.
Title of the thesis: Surface Roughness Analysis of Al-SiC
Metal Matrix Composite Cut by Abrasive Water Jet.
Ph. D. colloquium of Mr. K. Ramesh, Assistant Professor,
Department of Mechanical Engineering under the
guidance of Dr. S. V. Raghurama Rao, Associate
Professor, Department of Aerospace Engineering, Indian
Institute of Science, Bengaluru was held on 28th January
2019 at 3.00 PM at Department of Aerospace
Engineering, Indian Institute of Science, Bengaluru.
Title: Novel, Robust and Accurate Central Solvers for
Real, Dense and Multicomponent Gases
Faculty Achievement - Ph. D. Awarded
Department of Mechanical Engineering congratulates
Dr. K. Veerabhadrappa, Assistant Professor, Department
of Mechanical Engineering, BMSCE, for being awarded
Doctor of Philosophy degree.
Title of thesis: “Analysis and Optimisation of Heat Exchangers”
University: Jawaharlal Nehru Technological University,
Hyderabad.
Pariksha pe charcha
29th January 2019
"Pariksha Pe Charcha" addressed by our honorable
Prime Minister Sri. Narendra Modi on 29.01.2019 during
11.15 to 1.00pm was attended by about 200 students of
Department of Mechanical Engineering. Students
benefitted on how to beat stress through question and
answer session which had participants attending
webinar across India asking questions about destressing
exam fear and career options.
Technical Staff - Extra Curricular Activity
3rd Annual International Staff Tournament
Sri. Basavaraju, Asst. Instructor, Deparment of
Mechanical Engg., BMSCE, participated in Badminton
Tournament held at PES University, Bengaluru from 20-
01-2019 to 23-01-2019 and the group won the 2nd prize.
Departmental Meetings
Date &
Time Venue Agenda
04.01.2019
1.00 P.M.
HODs
Chamber To review MSE SAR
23.01.2019
11.30 P.M. MESH
1. Scheme for III – VIII Semester -
2018 batch
2. Syllabus for III & IV Semester –
2018 batch
3. Any new Elective to be introduces
for VI – VIII Semester
4. Modification of Syllabus VI to VIII of
earlier batch
5. Any other matter with permission
of chair
25.01.2019
11.00 a.m.
HODs
Chamber To review MSE SAR
25.01.2019
12.30 P.M.
HODs
Chamber
Procurement of Materials for
Laboratories & Renewal of Solid
works CAD Software for year 2019-21
by DAC Committee.
Department of Mechanical Engineering, BMSCE Page 1
B. M. S. COLLEGE OF ENGINEERING Department of Mechanical Engineering
Seminar
2nd February 2019
A Seminar on ‘Opportunities for Higher Education and
Research in Germany’ was delivered German Academic Exchange Service (DAAD) on 2nd February 2019 at 10:45
am in Department of Mechanical Engineering. The
students received guidance regarding opportunities for
higher studies at German Universities.
Visit of Foreign delegates to the Dept.
4th February 2019
Prof. Abul K. M. Azad, PhD, Acting Associate Dean,
Northern Illinois University, USA, visited the Department
of Mechanical Engineering on the 4th Feb, 2019. During
his visit, he visited all the facilities of the department and
interacted with the HOD, Dr. Bheemsha Arya, lab staff
and students of the department. He expressed his
happiness to understand all the facilities of the
department and its people.
In the 4-hour visit, Prof. Azad also interacted with the
many Professors of the department, R&D Coordinator of
the Institute and exchanged ideas for collaboration. As
an outcome of the discussion, a possibility of MoU
between the two institutions was discussed for mutual
benefit of the students and faculty.
Comprehensive Viva-Voce of Research Scholar
4th February 2019
Comprehensive Viva-Voce Examination of research
scholar Mr. Shivakumara N. V. (USN:1BM17PMA01) was
held on Monday 04.02.2019 at 12.00 Noon at the
Mechanical Engineering Department.
Chairman Dr. Dayananda Pai visited Dept.
6th & 18th February 2019
Our beloved Chairman Dr. Dayananda Pai visited
Department of Mechanical Engineering on 6th February
2019 & 18th February at 4.00 P.M. and discussed about
the Roadmap of the Department for 2025 and the
budgetory requirements of the department.
Industrial Visit
15th February 2019
An industrial visit to M/s Ace Designers Ltd., Peenya,
Bengaluru, was arranged on 15th Feb 2019 for the
students of 4th semester. The students had opportunity
to visit facilities such as spindle room, shop floors, tool
room, testing room, and Warehouse. The students got an
insight into hard-core manufacturing related machines
and processes. At the end of the industrial visit, all the
students were very satisfied and happy for having got an
exposure to various new and practical aspects of a
manufacturing plant.
News Letter –FEBRUARY 2019
Page 2 Department of Mechanical Engineering, BMSCE
The visit was coordinated by Prof. Narahari & Prof. Kiran
Kumar U. About 38 volunteered students from various
sections benefited from the visit.
Industrial Visit
21st February 2019
An Industrial visit to National Aerospace Laboratories,
Old Airport Road, Bengaluru was arranged on 21st
February 2019 students of IV Semester C-Section. The
group of students and faculty visited Advanced
Composites division, Structural testing, and Wind tunnel
divisions. The students got opportunity to understand
the manufacturing process and testing involved in
various aerospace components.
Prof. E. Suresh and Prof. Rashmi R., Assistant Professors
from the department coordinated the event.
Industrial Visit
26th February 2019
An Industrial visit to National Aerospace Laboratories,
Old Airport Road, Bengaluru was arranged on was
arranged on 26th February 2019 for students of 4th
Semester D-Section.
Dr. K. Veerabhadrappa & Prof. Narendra Babu N.,
Assistant Professors from the department coordinated
the event. 43 students were benefitted by this visit.
Industrial Visit 27th February 2019
An Industrial visit to National Aerospace Laboratories,
Old Airport Road, Bengaluru, was arranged on 27th
February 2019 for students of IV semester B-Section. Dr.
Tataram K. Chavan and Dr. Anil Chandra A. R., Assistant
Professors from the department coordinated the event.
46 students were benefitted by this visit.
LIC Visit
28th February 2019
The Local Inquiry Committee (LIC) of Visvesvaraya
Technological University (VTU) visited the Department
on 28.02.2019 at 11.00 A.M towards permanent
affilitation of the UG and PG programs.
News Letter –FEBRUARY 2019
Department of Mechanical Engineering, BMSCE Page 3
Training / FDP/ Conference/Symposium/
Meeting attended by Faculty
Faculty Programme Date Venue
Dr. H. K. Rangavittal
Visited CVRDE for
presenting the
progress and
further discussions
related to funded
project titled “Development of Carbon Fiber
Reinforced Plastic
(CFRP) torque transmission tube” as a Principal
Investigator of the
Project.
04.02.2019 Avadi, Chennai
Dr. K. Guruprasad
To visit Colleges as
a member of NBA
Expert committee
08.02.2019
to
10.02.2019
Sri. Ram Rohit V.
To attend short course on “ Applied Rheology by Thomas Mezger”
06.02.2019
Raman
Research
Institute,
C.V.Raman
Avenue,
Sadashivanagar
, Bengaluru.
Dr. L. Ravikumar EAC Meeting 12.02.2019
Sri. Narendra Babu N.
To Attend 360th
International
Conference on
Science,
Engineering &
Technology (ICSET)
for presentation of
his paper
15.02.2019
&
16.02.2019
Researchfora,
New Delhi.
Dr. L. Ravikumar
To attend TEQIP –III Mid Term
Review Meeting
18.02.2019 AICTE,
New Delhi
Dr. S. Srinivas
To present Project
proposal along with
NDF Scholar to the
Evaluation
Committee of
AICTE
28.02.2019
AICTE Head
Office, Nelson
Mandela Marg,
New Delhi
Dr. L. Ravikumar Mock Compliance
visit 26.02.2019
BMSIT & M,
Yelhanka,
Bengaluru
Faculty Publications
Faculty Title of Paper Publication Details
Arjun C C,
Sreekanth N V and
Dr. K Guruprasad
"A skill
enhancement
virtual training
model for additive
manufacturing
technologies"
16th International
Conference on Remote
Engineering and
Virtual
Instrumentation (REV-
2019)
3rd to 6th February
2019
Sreekanth N V,
Arjun C C and
Manish Suvarna
"Optimized additive
manufacturing
technology using
digital twins and
cyber physical
systems"
16th International
Conference on Remote
Engineering and
Virtual
Instrumentation (REV-
2019)
3rd to 6th February
2019
Sri. Narendra Babu
N.
Optimum
performance
analysis of
horizontal axis
wind Turbine
Researchfora,
International
Conference on Science
Engineering &
Technology (ICSET)
15.02.2019 &
16.02.2019 at New
Delhi
Sri. Madhav Murthy
Effect of Volume
Fraction and Resin
System on Tensile,
Compression and
Flexural Strength of
Electrial Glass Fiber
Reinforced Plastic
Laminate
Solid State
Phenomena,
ISSN: 1662-9779,
Vol.287, pp86-92,
doi.10.4028/
www.Scientific.net/
SSP 287.86@2019
Trans Tech
Publications,
Switzerland
Dr. K.
Veerabhadrappa
Study of Mechanical
Properties and
DrillingBehavior of
A17075 Reinforced
with B4C
ELSEVIER
Materials today:
Proceedings 5
(2018) 25102-25111
Dr. R. Suresh
Kumar
Evaluation of
A17075 Reinforced
with SiC for its
Mechanical
Properties &
Surface Roughness
by Drilling
ELSEVIER
Materials today:
Proceedings 5
(2018) 25121-25129
Faculty - Final Ph.D Viva Voce 12th January 2019
Ph.D viva voce of Mr. R. Suresh Kumar under the
guidance of Dr. C. S. Ramesh, Dean R & D, Presidency
University, Bengaluru was held on 2/02/2019 at
Jawaharlal National Technical University, Hyderabad.
Title of the thesis: “Study on Tribological Behavior of
inconel 718-TiO2 Composite Coatings”
Expert Lecture by Faculty
Dr. M. Ramachandra, Professor, Department of
Mechanical Engg. was invited to deliver a talk on “Introduction to Materials and Material characterization & ”Material Characterization using XRD” at FET MJP
Rohilkhand University, Bareilly, during February 14-16,
2019 in Faculty Development Programme on ‘Advanced
Materials Synthesis, Characterization and Processing’ under twinning programme of TEQIP-III.
News Letter –FEBRUARY 2019
Page 4 Department of Mechanical Engineering, BMSCE
Dr. S. Srinivas, Associate Professor, Department of
Mechanical Engg. was invited to deliver talk on Abrasive
Waterjet Cutting at Three-day FDP on ‘Advanced
Materials Synthesis, Characterization and Processing’ at
Rohilkhand University, Bareilly, during February 14-16,
2019 under twinning programme of TEQIP-III.
Dr. S. Srinivas, Associate Professor, Department of
Mechanical Engg. was invited to deliver talk on
Unconventional Machining at 3-day FDP on ‘Advanced
Materials Synthesis, Characterization and Processing’ at
FET MJP Rohilkhand University, Bareilly, during
February 14-16, 2019 under twinning programme of
TEQIP-III.
Dr. R. Suresh Kumar, Asst. Professor, Department of
Mechanical Engineering was invited to deliver talk on
Outcomes Based Education in Technical Education and
explained the process of NBA accreditation at 3-day
workshop on SAR filling at FET MJP Rohilkhand
University, Bareilly, during February 14-16, 2019.
Faculty Achievement - Ph. D. Awarded
Department of Mechanical Engineering congratulates
Dr. R. Sureshkumar, Assistant Professor, Department of
Mechanical Engineering, BMSCE, for being awarded
Doctor of Philosophy degree.
Title of thesis: “A Study on Tribological Behavior of
inconel 718-TiO2 Composite Coatings”
University: Jawaharlal Nehru Technological University,
Hyderabad.
Faculty Achievement
Sri. Madhav Murthy received a certificate of
appreciation towards reviewing research papers of
IUCEE 2019 conference.
Faculty – Extra Curricular Activity
Yakshagana Performance by Prof. Shashiraj, Assistant
Professor, Dept. of Mechanical Engineering, BMSCE.
Date: 04 Feb 2019, Presented Yaksha Nruthya Roopaka
as a part of cultural events of 16th International
Conference on Remote Engineering and Virtual
Instrumentation - REV 2019 organized by B.M.S. College
of Engineering in association with International
Association of Online Engineering (IAOE).
Venue: Auditorium-2, New Block, B.M.S College of
engineering, Karnataka
Date: 23 Feb 2019, Played the role of LAVA in
Yakshagana prasanga-KUSHA-LAVA
Venue: Himbravalli, Shringeri, Chikmagalore district.
Date: 24 Feb 2019, Played the role of KACHAKUMARA in
Yakshagana prasanga-KACHADEVAYANI
Venue: Kuvempu Rangamandira, Shimoga.
News Letter –FEBRUARY 2019
Department of Mechanical Engineering, BMSCE Page 5
Departmental Meetings
Date &
Time Venue Agenda
01.02.2019
2.30 p.m. MESH
1. BOG Chairman Dr.Dayananda Pai
visit to the Department
2. Preparation of Budget for the AY
2019-20
05.02.2019
2.30 p.m.
HODs
Chamber
1. Guidelines for evaluating Seminar
(VIII Semester)
2. Minor modification in CAD/CAM
Syllabus
3. Equivalence Course for M.Tech
Subject
4. Alternate Assessment Tool
05.02.2019
10.45 A.M.
HODs
Chamber Discussion on PG MSE SAR
06.02.2019
2.30 P.M.
HODs
Chamber
Discussion on Roadmap for vision
2025
11.02.2019
2.30 P.M.
HODs
Chamber
Preparation of Budget for the AY
2019-20
12.02.2019
3.00 P.M. MESH
MEA Coordinators Meeting: Plan of
activities for the current semester
14.02.2019
2.30 p.m.
HODs
Chamber
Discussion on Innovation and
Roadmap
15.02.2019
2.30 p.m.
HODs
Chamber Discussion on Roadmap 2025
15.02.2019
3.30 p.m.
HODs
Chamber
Review of students application for
Financial Assistance for Research
Project (TEQIP-III)
21.02.2019
10.45 A.M.
HODs
Chamber
DPC Meeting: Procurement of CNC
Machines
21.02.2019
11.00 A.M.
HODs
Chamber
MEA Coordinators Meeting
Contribution towards Pulwama Martyr’s Family
23.02.2019
12.00 P.M. MESH
Discussion on New Curriculum
structure for Higher Semester- UG
26.02.2018
2.00 p.m.
HODs
Chamber
DPC Meeting :Procurement of Cutting
Tools
Department of Mechanical Engineering, BMSCE Page 1
B. M. S. COLLEGE OF ENGINEERING
Department of Mechanical Engineering
Industrial visit
1st March 2019
Industrial visit to National Aerospace Laboratories
was arranged on 1st March 2019 for IV- A Section
students.
The students visited Knowledge Transfer and
Management Division (KTMD), Advanced
Composite Division (ACD) and Centre for Societal
Missions and Special Technologies (CSMST).
The facilities visited included composite aircraft
parts, Autoclave and processing of composite
materials in clean room, Air craft test stations ,
Wind turbines and solar power panels as part of
Hydrid energy systems, testing of aircraft in wind
tunnel, Acoustic test facility and NAL-HANSA,
NAL/HAL SARAS, NAL-NM5 aircraft hangars.
The event was coordinated by Prof. Shashiraj &
Prof. Tripti Pachori. A total of about 60 students
accompanied by faculty members attended the
visit.
Industrial visit
5th March 2019
Industrial visit to National Aerospace Laboratories
was arranged on 5th March 2019 for VI- D Section
students. The visit was coordinated by Dr. R.
Suresh Kumar & Dr. Suhas B. G.
News Letter – MARCH 2019
Page 2 Department of Mechanical Engineering, BMSCE
Guest Lecture
2nd March 2019
A Guest Lecture by Mr. Shekar, Indian Institute of
Management, Udaipur, on the topic “Digital
Enterprises” was organised on 2nd March 2019 on
at 11.00 a.m. in Mechanical Engineering Seminar
Hall. The event was organized by the Mechanical
Engineering Association (MEA), Department of
Mechanical Engineering, BMSCE.
Guest Lecture
6th March 2019
A Guest Lecture on“Experiences in Western
World” by Dr. Sureshwara Bengaluru was
organised on 6th March 2019 at 12.00 p.m. in
Mechanical Engineering Seminar Hall. The event
was organized by the Mechanical Engineering
Association (MEA), Department of Mechanical
Engineering, BMSCE.
Dr. B. Sureshwara addressed audience about his
experiences in western world. He shared his
experiences of working in underwriters laboratory
and other organizations.
Guest Lecture
26th March 2019
A Guest Lecture on "Renewable Energy
Technologies for Sustainable Development with
case studies & Projects implemented by NIE-
CREST” by Dr. Shamsundar Subbarao was
organised on 26th March 2019 in Mechanical
Engineering Seminar Hall.
The event was organized by the Mechanical
Engineering Association (MEA), Department of
Mechanical Engineering, BMSCE.
In the talk, which lasted for about one hour, Dr.
Shamsundar gave an overall insight of the
development of Renewable Energy and
sustainable technologies over the past several
decades. He also covered the need or importance
of Sustainable technologies. He explained the
basic engineering involved and the possible areas
of exploration related to the field. He showed
interesting photographs and video clips of
different case studies and projects and their
specific technological features.
The talk was attended by about 120 students of
UG 2nd and 3rd year Mechanical engineering along
with the faculties of Mechanical Engineering.
NAAC Peer Team Visit
23rd & 24th March 2019
NAAC Peer Team visited the Department on 23rd
and 24th as part of Instutional accreditation.
News Letter – MARCH 2019
Department of Mechanical Engineering, BMSCE Page 3
MEA Day
29th March 2019
DYNAMECH-2019, Mechanical Engineering
Association (MEA) Day was celebrated on 29th
March 2019 at 1:30 pm in BMSCE Auditorium-2.
The event was organized by the Mechanical
Engineering Association (MEA). The Program was
inaugurated by Chief Guest Sri. Jaishiv Sharma,
Deputy Executive Engineer, BEL, Dr. B. V.
Ravishankar, Principal, BMSCE, Dr. Ravishankar
Deekshit, Vice Principal, Dr. Bheemsha Arya, HOD,
Dept. of Mechanical Engineering, and Dr. Tataram
K. Chavan, Chief Coordinator, MEA, BMSCE were
present.
As a part of MEA day, a week before DYNAMECH
2019, MEA coordinators conducted many
activities / competitions for staff and students of
the department. The staff activities included: Nage
Kannada, Padabandha (Cross word puzzle),
Guruthisi Hesarisi, etc. All teaching and non-
teaching staff actively participated in these events.
Techno cultural events held for students included
Gully cricket, CRUISE, BRAINSTORM, AEROSPACE
WORKSHOP, SLOW BIKE RACE, PUBG, etc. Prizes
for all the competitions were distributed during
the function. More than 300 students from both
UG and PG programs and staff of Mechanical
Engineering department attended the program.
On stage events such as Songs, Dance,
Yakshagana, Bharathanatyam performance, etc.
were eye-catching and well appreciated by the
audience.
News Letter – MARCH 2019
Page 4 Department of Mechanical Engineering, BMSCE
Training / FDP/ Conference/Symposium/
Meeting attended by Faculty
Faculty Programme Date Venue
Dr. L. Ravikumar
Workshop on
“Orientation workshop on
Student Learning
Assessment (SLA)
conducted by
NPIU
05th
March
AICTE
Auditorium,
Nelson
Mandela Road,
Vasant Kunj,
New Delhi
Dr. L. Ravikumar NBA Assignment
14 March
to 16
March
2019
Dr. Rudra Naik,
Dr. J. Sharana
Basavaraja
ISTE 48th National
Annual Faculty
Convention
19th & 20th
March
2019
VTU Campus,
Belgaum
Dr. S. M. Suresh
Scrutiny
Committee
Meeting
26 March
2019
AICTE South
Central Region,
Hyderabad
Dr.S.M.Suresh Committee
Meeting
28th & 29th
March
2019
AICTE,
New Delhi
Dr. L. Ravikumar
To visit colleges as
an NBA Expert
Member
28th to
30th
March
2019
Sri.Madhav
Murthy
As a member of
Evaluation
committee to
Assessment of
students soft and
employability
skills
30th
March
2019
Welingkar
Institute of
Management
Faculty Publications
Faculty Title of Paper Publication
Details
Shivakumara
N.V.
Bheemsha Arya
Experimental
Performance
Evaluation of
Thermoacoustic
Refrigerator
made up of
Poly-Vinyl-
Chloride for
different
Parallel Plate
Stacks using Air
as a working
medium
2nd International
Conference on
Materials,
Manufacturing &
Modelling
(ICMMM-2019)
29th - 31ST
March,2019,
VIT, Vellore,
Tamil Nadu
Student Participation in Sports
Student Name Programme Date Venue
Rahul Prabhu
1BM17ME108
IV Semester
VTU Inter
Collegiate
Volleyball (M)
Tournament
2019-20
12th-13th
March
2019
Organized by
TOCE,
Bengaluru &
RLJIT,
Doddaballap
ur.
Faculty - Final Ph.D Viva Voce
18th March 2019
Ph.D. viva-voce of Mr. H. R. Prakash under the
guidance of Prof. S. Ram and Prof. C. Jacob was
held on 18/03/2019 at Indian Institute of
Technology, Kharagpur.
Title of the thesis: “Magnetic, Mechanical and Magneto-Electronic Properties of Ag/Cr Modigied
Ni-Mn-Sn Heusler Alloys Crystallized in Small
Crystallites”
Faculty Achievement - Ph. D. Awarded
Department of Mechanical Engineering
congratulates Dr. Prabhu Swamy N. R., Dr. Raghu
Y., Dr. Bharathi V., Assistant Professors,
Department of Mechanical Engineering, BMSCE,
for being awarded Doctor of Philosophy degree by
Visvesvaraya Technological University, Belagavi.
News Letter – MARCH 2019
Department of Mechanical Engineering, BMSCE Page 5
Department of Mechanical Engineering
congratulates Dr. H. R. Prakash, Assistant
Professor, Department of Mechanical Engineering,
BMSCE, for being awarded Doctor of Philosophy
degree by Indian Institute of Technology,
Kharagpur.
Faculty – Extra Curricular Activity
Yakshagana Performance by Prof. Shashiraj,
Assistant Professor, Dept. of Mechanical
Engineering, BMSCE.
Date: 03 Mar 2019, Played the role
of MADANA of yakshagana
prasanga CHANDRAHASA
CHARITHRE.
Venue: ADA Rangamandira, J C
Road, Bengaluru
Date: 04 Mar 2019, Played the
role of Lord Vishnu of
yakshagana prasanga
BASMASURA MOHINI
Venue: Sri Varasaiddi Vinayaka
Temple, Vijayanagara,
Bengaluru
Date: 04 Mar 2019, Played the role
of Lord Vishnu of yakshagana
prasanga JALANDHARA KALAGA
Venue: Vinayaka temple,
Basaveshwara Nagara, Bengaluru
Date: 04 Mar 2019, Played the
role of PADMAVATHI of
Yakshagana prasanga
SHANISHVARA MAHATHME.
Venue: Srinagara, Bengaluru
Date: 10 Mar 2019, Played the role
of Lord ESHWARA of Yakshagana
prasanga DAKSHA YAJNA.
Venue: Sosale, Mandya district.
Date: 17 Mar 2019, Played Lord
KRISHNA of JAMBAVATHI
KALYANA.
Venue: Hosapete, BALLARI
district.
Date: 29 Mar 2019, Performed a Yaksha Nrtuthya Roopaka on the
occasion of DYNAMECH2019
Venue: Auditorium2, New Block, B.M.S.College of Engineering
Training / FDP/ Conference/Symposium/
Meeting attended by Student
Student Programme Date Venue
Yashas, Likhith,
Varun Kumar
PG Students
10-Days Skill
Development
Course on
Rooftop Solar
Grid Engineer
11th to
22nd
March
2019
Mahatma
Gandhi Institute
of Rural Energy
& Development
(MGIRED),
Bengaluru
Departmental Meetings
Date &
Time Venue Agenda
01.03.2019
2.30 P.M.
HODs
Chamber
Discussion on Multistage Centrifugal
Compressor Installing for Turbo
Machine Lab.
02.03.2019
12.00 P.M. MESH
Preparations of Rubrics for VIII
Semester Seminar Evaluation
12.03.2019
2.30 P.M.
HODs
chamber
DAC Meeting: Scrutiny of Applications
for Faculty positions in Mechanical
Engg. & Aerospace Engg.
27.03.2019
10.45 A.M.
HODs
Chamber
To Discuss Equivalence course for Mr.
Wilson Guite (US-1BM10ME126)
27.03.2019
2.30 P.M.
HODs
Chamber
DAC Meeting
Review of students applications for
Financial Assistance for Research
Project ( TEQIP-III)
29.03.2019
11.00 A.M.
HODs
Chamber
Discussion on CNC Machine
Comparative statement and
Recommendation for procurement of
the same.
Department of Mechanical Engineering, BMSCE Page 1
B. M. S. COLLEGE OF ENGINEERING
Department of Mechanical Engineering
Guest Lecture
8th April 2019
A Guest Lecture by Dr. J. S. Rao, President, The Vibration
Institute of India & AICTE-INAE Distinguished Visiting
professor, was organised on 8th April 2019 on the topic
“Kinetics of Machinery” at 11.15 a.m. in Mechanical
Engineering Seminar Hall. During this occasion, a Book on “ Kinetics of Machinery through Hyperworks” authored by
Prof. Rao was released by Principal Dr. B. V. Ravishankar.
The event was organized by the Mechanical Engineering
Association (MEA), Department of Mechanical Engineering,
BMSCE. Dr.H.K.Rangavittal coordinated the event and Vice
Principal Dr.Ravishankar Deekshit and HOD, Dr.Bheemsha
Arya were present.
Training / FDP/ Conference/Symposium/ Meeting
attended by Faculty
Faculty Programme Date Venue
Dr. K. Guruprasad
Visit to colleges as an
Expert Committee
member of AICTE
01.04.2019 &
02.04.2019
Dr. S. M. Suresh To visit colleges as an
AICTE Expert Member 02.04.2019
Dr. S. M. Suresh To visit colleges as an
AICTE Expert Member 08.04.2019
Dr. Giridhara G.
To visit the Colleges for
evaluation as a
member of NBA Expert
Committee
12.04.2019
to
14.04.2019
New Delhi
Dr. K. Guruprasad
To visit colleges as an
Expert Committee
member of AICTE
15.04.2019 &
16.04.2019
Dr. S. M.Suresh
As an Expert Member
for EVC Committee
Appointment
24th to 26th
April 2019.
AICTE Northern
Region Office,
Kanpur
Dr. H. K. Rangavittal BOE Meeting 24.04.2019 MSRIT,
Bangalore
Dr. Y. S. Rammohan
Dr. J. Sharana
Basavaraja
BOE Meeting 23.04.2019 PESCE, Mandya
Dr. L. Ravikumar
To visit colleges as an
UGC Expert Committee
Member
26.04.2019 &
27.04.2019
Faculty – Chapter Publication
Publisher Name Intechopen
Book chapter title Abrasive Water Jet Cutting - A Risk free
Technology for Machining Mg Based Materials
Authors Niranjan C A , Dr.S Srinivas and
Dr. M Ramachandra
Book Name Magnesium - The Wonder Element for
Engineering/Biomedical Applications
Edited By Dr. Manoj Gupta, Associate Professor
Department of Mechanical Engineering,
National University of Singapore, 9 Engineering
Drive 1
Singapore 117576
DOI 10.5772/intechopen.85209
Date of Publication
(Online)
March 29th 2019
Faculty Additional Responsibility
Dr. Bheemsha Arya, Professor & Head, Department of
Mechanical Engineering assumed charge as Principal,
B. M. S. Evening College of Engineering on Monday,
08.04.2019.
Expert Lecture by Faculty
5th April 2019
Dr. S. Srinivas, Associate Professor, Department of
Mechanical Engineering delivered a technical talk at
PES College of Engg, Mandya on 5-4-2019 on the topic
‘Research in waterjet machining’.
News Letter – APRIL 2019
Page 2 Department of Mechanical Engineering, BMSCE
13th April 2019
Dr. R. Sureshkumar, Assistant Professor, Department of
Mechanical Engineering was invited to present a Guest
Lecture at Two-day workshop on “Bloom’s Taxonomy, Assessment and Performance indicators” at Guru Nanak Dev Engineering College, Bidar.
Faculty Pre Ph.D Colloquium
24th April 2019
Sri. H. M. Shivaprasad, Associate Professor, Department of
Mechanical Engineering presented his Pre-Ph.D. colloquium
on 24.04.2019 at 12.30 p.m. in MESH under the guidance of
Dr.Giridhara G.
Topic "Intershaft Squeeze Film Dampers - An Investigative
Study"
Information 13th April 2019
Department of Mechanical Engineering celebrated Sri Rama
Navami on Saturday, 13th April 2019 and about 1000 No. of
students and faculty, Teaching and Technical staff were
participated.
Prof. K.Ramesh, Assistant Professor was relieved from his
duty on 30.04.2019.
Faculty - AWARD
Dassault Systèm awarded Certificate to Prof. Shashiraj,
Assistant Professor, Department of Mechanical Engineering
as an author for developing online learning material for
Dassault Systèmes Peer Learning Experience Program
(PLEXP).
Dassault Systèmes launched PLEXP in Europe and USA in the
year 2016-17. About 100 professors from 14 universities
have enrolled in this program and are developing of various
courses. With the launch of this program in India, expert
professors from various institutions in India got
opportunities to be part of Global team of Professors and
work collaboratively on this program. The course developed
by Prof. Shashiraj, “Finite Element Analysis of Composite Material Parts using 3D Experience” reviewed by Global Committee of experts is accepted with appreciation and
published on PLEXP Platform of Dassault Systèmes. Dassault
Systemes felicitated professors who contributed for
development of courses as part of PLEXP in a function on
Thursday, 21st February 2019 at Dassault Systemes campus
in Pune.
Student Achievement
“cogNIEscience”- A National Level Paper presentation
Competition.
In the National Level Paper presentation competition held in
NIE Mysore, on 11th April 2019, two students of
Manufacturing Science and Engineering (P.G. Studies) of
BMS College of Engineering, Bangalore; Adithya Hegde and
Balaji V have participated and presented papers on “Effect
of Process Parameters on Machining Time in Abrasive
Water-jet Cutting of Marble” and “Effect of process parameters on the MRR while machining Zinc coated CI using
Wire EDM” respectively.
Adithya Hegde has won 2nd Prize in P.G. Section.
Departmental Meetings
Date &
Time Venue Agenda
02.04.2019
10.45 A.M.
HODs
Chamber
Machine Tool and Machining – course
discussion
Record Writing in Lab
Evaluation of Models of Lab
Self-Study Evaluation
02.04.2019
2.30 P.M.
HODs
Chamber
To finalize 3rd and 4th semester of
M.Tech MSE Scheme
22.04.2019
3.15 P.M.
HODs
Chamber
TEQIP-III Coordinators Mentor &
Mentee institutions with faculty
27.04.2019
12.00 P.M. MESH
21st BOS (Internal) Meeting:
Review of UG Scheme for Higher
Semesters
30.04.2019
2.00 P.M. MESH
Preliminary discussion for finalizing III to
VIII Semester Scheme.
Department of Mechanical Engineering, BMSCE Page 1
B. M. S. COLLEGE OF ENGINEERING
Department of Mechanical Engineering
Taking charge as HOD
9th May 2019
Dr. Rudra Naik, Professor, Department of
Mechanical Engineering assumed charge as Head
of the Department of Mechanical Engineering,
BMSCE, on 9th May 2019. Dr. Bheemsha Arya
Professor, Department of Mechanical Engineering,
handed over the charge.
Interaction
24th May 2019
Prof. Sanjay Jayaram, Chairman of Aerospace
Engg., St. Louis University, Missouri, USA, visited
our Department on Friday, 24.05.2019 at 10.45
A.M.
Soft Skills Assessment
Prof. Madhav Murthy, Assistant Professor of our
department was invited for assessing the soft skills
of students studying in various degree programs,
for two days 7th and 8th, May 2019 at PEGASUS
Institute of Training and Excellence,
Doddaballapura.
Best Project Work Evaluation
24th May 2019
Evaluation of VIII Semester Project work was
conducted by the Department of Mechanical
Engineering on 24.05.2019. Among the 48 projects
carried out during the A.Y. 2018-19, 10 projects
were shortlisted out of which three best projects
were selected from the department.
Three Best UG Projects selected at the
Department Level
Name of the
student/s
Title of the
Project work
Name of the
Guide/s
G. Anvesh Reddy,
G. Ganesh,
Onkar Badiger
Improving
Computer vision
of a Robot using
AI and Virtual
Reality
Dr. Vinod C.
Aralimatti
Amit S Kalbag,
Basavaprabhu B,
Bhargav Krishna,
Jaganath
Development of
Solar Power
Vapour
absorption
Refrigeration
System
Dr. Ravi L.
Glavin Crasta,
H. Sanjay Kamath,
Niranjan S.,
Nishith Shetty
Design and
Fabrication of a
low cost
ultrasonic defect
detection system
Dr. Y. S.
Rammohan
Information
4th May 2019
Students and faculty had voluntarily contributed to
the Martyr’s family welfare post the dastardly terror attack in Pulwama, J & K. The contribution
amount of Rs.11,000/- was transferred online to
the Martyr’s family welfare through Ministry of
Home Affairs Web Portal
www.bharatkeveer.gov.in in to the “ Bharat ke veer
News Letter – MAY 2019
Page 2 Department of Mechanical Engineering, BMSCE
corpus fund” through the online account of Sri. Madhav Murthy, Asst. Professor, Department of
Mechanical Engg.
11th May 2019
Department of Mechanical Engineering condole
sad demise of Sri.P. N. Kalander Saheb, Assistant
Instructor, Department of Mechanical Engineering
on 11.05.2019. Faculty, Technical Staff and Non
teaching staff of the Department express their deep
condolences.
Training / FDP/ Conference/Symposium/
Meeting attended by Faculty
Faculty Programme Date Venue
Dr. K. Guruprasad NEET meeting 4th and
5th May
Dr. L. Ravikumar
Interaction
Meeting with
Brazilian
delegation
9th May New Delhi
Dr. Shivashankar R.
Srivatsa BOE Meeting 18th May
NMAMIT,
Nitte
Dr. L. Ravikumar
TEQIP-III
Finance Review
Meeting and
workshop on
Accounts, Tally
& Audit Reports
21st May PESCE,
Mandya
Sri. Ram Rohit V.
International
Conference on
Smart and
Sustainable
Developments in
Materials,
Manufacturing
and Energy
Engineering
SME-2019
23rd &
24th May
2019
N.M.A.M.
Institute of
Technology
, NITTE
Dr. J. Sharana
Basavaraja
Professional
Development
Training
Programme
(PDT)
27th to
31st May
2019
IIM,
Udaipur
Dr. L. Ravikumar Ph.D Scrutiny
Meeting
30th May
2019
VTU,
Belagavi
Faculty Publications
Faculty Title of Paper Publication Details
Ram Rohit
Vannarth,
F M Ayub Khan,
Pradyumna Bhat,
K. Mallikarjuna
Babu, P. Martin
Jebraj
Study on
sedimentation
stability of
Mahua and
Simarouba oils
based
magnetorheolo
gical fluids
International
Conference on
Smart and
Sustainable
Developments in
Materials,
Manufacturing and
Energy Engineering
SME 2019
Sudarshan B.,
Saravanan S.
Numerical
Analysis of
Surface Heat
Flux in a
Forward-
Facing Cavity
In: Sasoh A., Aoki
T., Katayama M.
(eds) 31st
International
Symposium on
Shock Waves 2.
ISSW 2017.
Springer, Cham
Training / FDP/ Conference/Symposium/
Meeting attended by Student
Student Programme Date Venue
Mr. Hashik
Hariharan M.
National Conference
on Recent Trends &
Innovations in
Mechanical
Engineering &
Technology
RTIMET-2019
3rd & 4th
May 2019
Cambridge
Institute of
Technology,
K. R. Puram,
Bangalore-
36
Expert Lecture by Faculty
31st May 2019
Prof. Devaraj K., Asst. Professor, Department of
Mechanical Engineering was invited to conduct the
workshop on the usage of ‘LaTeX for
documentation’ at Christ University, Faculty of
Engineering, Kengeri Campus, Bangalore, on 31st
May 2019.
News Letter – MAY 2019
Department of Mechanical Engineering, BMSCE Page 3
Faculty Achievement
Dr. Rammohan Y.S., Associate Professor, Dept. of
Mechanical Engineering was invited as Chief
Guest at the MECH SHOW 2019 held on 15th May,
2019 at Don Bosco Institute of Technology,
Bengaluru.
Dr. Rammohan Y.S., Associate Professor, Dept. of
Mechanical Engineering was invited to Chair the
Session of National Conference on Emerging
Trends in Materials, Design and Manufacturing -
NCMDM 2019 at J.S.S. Academy of Technical
Education, Bengaluru on May, 17th 2019.
Faculty – Extra Curricular Activity
Yakshagana Performance by Prof. Shashiraj,
Assistant Professor, Dept. of Mechanical
Engineering, BMSCE.
Date: 01 May 2019, Played the role of LAVA in
Yakshagana prasanga-KUSHA-LAVA
Venue: Neralakatte, Kundapur Taluk, Udupi
district.
Student –Cash award Received
The following students received cash award during
Dr. B. R. Ambedkar Jayanthi celebration held on
10th May 2019 at 3.00 p.m. at Indoor Stadium.
Program USN Name
UG 1BM15ME054 Dhanush L.
PG 1BM17MMD03 Gowtham K. L.
1BM17MSE08 Rajesh G. H.
Departmental Meetings
Date & Time Venue Agenda
06.05.2019
2.30 P.M. MESH
Sanction of PG Course of
Thermal Engineering for
further process.
10.05.2019
2.30 P.M. MESH
1. Clarification regarding
improvement Test and
portion.
2. Semester End Exam
3. Farewell date for final
year students
4. Project work & Technical
Seminar exams
16.05.2019
9.45 A.M. MESH Procurement of 250kN UTM
21.05.2019
10.45 A.M.
HODs
Chamber
Condonation of Attendance
Shortage
25.05.2019
11.00 A.M.
HODs
Chamber
Preparations for PG Thermal
Engg.
27.05.2019
2.30 P.M.
HODs
Chamber
Discussion on Turbo
machinery Question paper.