new products digest...provide perfect modules from abundant products line-up! highly support various...

Provide perfect modules from abundant products line-up!Highly support various factory automation controls

■ Sensor connector(e-CON) type, MIL connector type I/O modules ■ Temperature control modules for CC-Link IE Filed Network■ Synchronous communication function compatible modules■ MELSEC-L Series RS-422/485 adapter module for GOT or other devices

NEWTemperature control module

NZ2GF2B-60TCTT4NZ2GF2B-60TCRT4

18-point two-piece terminal block type

NEW

NZ2GFCM1-16TNZ2GFCM1-16TE

MIL connector type

NZ2GFCE3-16TNZ2GFCE3-16TE

Sensor connector(e-CON) type

Transistor output module

NZ2GFCM1-16DNZ2GFCM1-16DE

MIL connector type

NZ2GFCE3-16DNZ2GFCE3-16DE


NEWDC input module

AvailableTransistor output module

NZ2GF2B1-16TNZ2GF2B1-16TE


AvailableDC input module

NZ2GF2B1-16D18-point two-piece terminal block type

AvailableHigh-speed counter module

NZ2GFCF-D62PD240 pins connector type

Availableanalog I/O module

NZ2GF2B-60AD4NZ2GF2B-60DA4


TOPICS

Synchronous communication function

NEW PRODUCTS DIGEST

February　2014

No.339E

New Product ReleaseDigest

NEW

NEW

Synchronous communication available




NEW

NEW

NEW

• Response time can be set at 0ms, 0.2ms, 1ms, 1.5ms, 5ms, 10ms, 20ms and 70ms.• Enables a high-speed input/output control with the Fast logic function.

● Add and combine as you like! Flexible system configuration is possible with these block-type remote modules.● Connect an extension module to an I/O, analog, or high-speed counter module to extend the I/O points.● New type DC input modules and transistor output modules are now released.

These modules are compatible with sensor connector(e-CON) and MIL connector.Sensor connector(e-CON) type... Easy direct connection to a 2-wire or 3-wire sensor without a terminal module.MIL connector type ....... Easy connection for relay terminal and terminal conversion modules.

The simple connection method reduces a man-hour of the wiring work and the maintenance.● Two temperature control modules for CC-Link IE Field Network are also released.

These modules easily control and monitor the distributed temperature devices in the network.● The DC input, transistor output, analog I/O, and high-speed counter modules are compatible with the Synchronous

communication function.

CC-Link IE Field Network Block type remote modules

Model Input type Input points

Rated input voltage/current

Wiring method

Connect Extended

module

Synchronous communication

Connect Extended

module

Synchronous communication Model Output type Output

pointsRated load voltage/Max. load current

Wiring method

Available

Available

Available

Available

Available

Available

Available

DC input module

DC input 24VDC(6mA)16 points 1-wirePositive common



DC input 24VDC(4mA)16 points 3-wire

Negative common

Negative common

DC input 24VDC(4mA)16 points 1-wireNegative common


MIL connector type


Remote device station





• The Number of ON times integration function easily accumulates the ON count of the connected output module.• Enables a high-speed input/output control with the Fast logic function.

Available

Available

Available

Available

Transistor output module

Transistor output 12/24VDC(0.5A)

12/24VDC(0.5A)

16 points 1-wireSink type

Transistor output Source type 16 points 1-wire


12/24VDC(0.5A)




12/24VDC(0.5A)




MIL connector type


• Operates the counting speed of input pulse at 8Mpps max. The duty ratio of the PWM output function can be set by 0.1µs and this enables precise output control. • The Pulse measurement function with 100ns measurement resolution enables highly accurate pulse width measurement.

High-speed counter module

Synchronous communication function(Combination with simple motion module)

40 pins connector type

• Operates at the conversion speed of 400µs/channel(analog input module) and 100µs/channel(analog output module).• By connecting an extension DC input module to the analog input module, it enables more precise A/D conversion speed control.(with the Trigger conversion function)

Model Input/Output type Occupied station

Number of channels

Occupied station

Number of channels

Model Input/Output type

Model Input/output type Number of channels

Analog input/output module

Voltage/current analog input 1 station 4 channels

4 channelsVoltage/current analog output 1 station


• Operates at the sampling cycle of 250 ms/4 channels. Mixed control mode of standard control and heating-cooling control is equipped. • The functions(Simultaneous temperature rise, Peak current suppression, Self-tuning, Heating-cooling control) are available.

Temperature control module

–

Available

Available

Available

–

–

Available

–

–

–

–

Available

Available

–

–

–

–

–

18-point two-piece terminal block type Thermocouple input, transistor output,

isolation between input channels

Resistance thermometer input, transistor output, isolation between input channels

1 station 4 channels

4 channels1 station

Differential input, DC input, coincidence output, transistor output(sink type) 2 channels

NZ2GF2B1-16D

NZ2GFCE3-16DE

NZ2GFCE3-16D

NZ2GFCM1-16D

NZ2GFCM1-16DE

NZ2GF2B1-16T

NZ2GFCE3-16T

NZ2GFCE3-16TE

NZ2GFCM1-16T

NZ2GFCM1-16TE

NZ2GF2B1-16TE

NZ2GF2B-60AD4

NZ2GFCF-D62PD2

NZ2GF2B-60DA4

NZ2GF2B-60TCTT4

NZ2GF2B-60TCRT4

CC-Link IE Field Network well supports various factory automation controls.

Mitsubishi Electric provides perfect modules from abundant products line-up.

Available

Available

Available

● DC input, transistor output, analog I/O, and high-speed counter modules are compatible with the Synchronous communication function. These modules perform with the operation cycle of the simple motion module. Therefore, the operation timing between the simple motion module(master station) and each slave station on the same network can be synchronized.

Connect Extended

module


Connect Extended

module


Connect Extended

moduleSynchronous

communication

*1: Simple motion module whose first 5-digit serial number is 15092 or later, supports this function. *2: I/O module whose first 5-digit serial number is 15102 or later, supports this function.

A slave module which supports the Synchronous communication function operates synchronously with the control cycle of the Simple motion module (the communication cycle of CC-Link IE Field Network). Therefore, the operation timing between the Simple motion module and each slave module can be synchronized.

Control cycle(Communication cycle)

2

1

3

4

5

NEW

NEW

NEW

compatible Incompatible

Simple motion moduleQD77GF16*1

Master station

Slave station Slave station

Transistor outputNZ2GF2B1-16T*2/16TE*2

DC inputNZ2GF2B1-16D*2

Servo amplifierMR-J4-B-RJ010+MR-J3-T10 Analog input

NZ2GF2B-60AD4*2

Analog outputNZ2GF2B-60DA4*2

High-speed counterNZ2GFCF-D62PD2*2

21

3

4

5

HEAD OFFICE: TOKYO BUILDING, 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPANNAGOYA WORKS: 1-14, YADA-MINAMI 5, HIGASHI-KU, NAGOYA, JAPAN

For safe use• To use the products given in this publication properly, always read the relevant manuals before use.

• Ethernet is a registered trademark of Xerox Corporation in the United States.• All other company names and product names used in this document are trademarks or registered trademarks of their respective companies.

Country/Region Sales officeUSA ··················+1-847-478-2100Brazil·················+55-11-4689-3000Germany···········+49-2102-486-0UK·····················+44-1707-28-8780Italy ···················+39-039-60531Spain ················+34-93-565-3131France ··············+33-1-5568-5568

Czech Republic ····+420-251-551-470Poland ··············+48-12-630-47-00Russia···············+7-812-633-3497South Africa ······+27-11-977-0770China ················+86-21-2322-3030Taiwan ··············+886-2-2299-2499Korea················+82-2-3660-9530

Singapore ·········+65-6470-2308Thailand············+66-2906-3238Indonesia ··········+62-21-663-0833India··················+91-20-2710-2000Australia············+61-2-9684-7777

New publication, effective Feb. 2014.Specifications are subject to change without notice.1402(MDOC)

Related product catalog

Programmable ControllersMELSEC-L seriesL(NA)08159E

The new L series has a small footprint and is loaded with features.

Little on size, Large on performance

Programmable ControllersMELSEC-L series

Simple!

Ethernet-based Open NetworkCC-Link IE Product CatalogL(NA)08111E

CC-Link + Industrial Ethernet =CC-Link IE Field Network withMotion Functions

Ethernet-based Open NetworkCC-Link IE Product Catalog

Adapter module RS-422/485 adapter for MELSEC-L series

• Connection with GOT• Communication with target devices using the Predefined protocol function and the Serial communication function

L6ADP-R4 115.2kbpsCommunication

speed

GOT(Graphic Operation

Terminal)connectable

Predefined protocol

function

Serial communication

function

More and more MELSEC-L series products

NEW

New Product Release No.339E

CC-Link IE Field Network Block type remote modulesItem Model Outline

Remote I/O module

DC input

NZ2GF2B1-16D 16 points, 24VDC, Response time: 0 to 70ms, Positive/negative common shared, 18-point terminal block, 1-wire, Remote device station

NZ2GFCE3-16D*1*2 NEW16 points, 24VDC, Response time: 0 to 70ms, Positive common(sink type), Sensor connector(e-CON), 3-wire, Remote device station

NZ2GFCE3-16DE*1*2 NEW16 points, 24VDC, Response time: 0 to 70ms, Positive common(source type), Sensor connector(e-CON), 3-wire, Remote device station

NZ2GFCM1-16D*1 NEW16 points, 24VDC, Response time: 0 to 70ms, Negative common(sink type), MIL connector, 1-wire, Remote device station

NZ2GFCM1-16DE*1 NEW16 points, 24VDC, Response time: 0 to 70ms, Negative common(source type), MIL connector, 1-wire, Remote device station

Transistor output

NZ2GF2B1-16T 16 points, 12/24VDC(0.5A), Sink type, 18-point terminal block, 1-wire, Remote device station

NZ2GF2B1-16TE 16 points, 12/24VDC(0.5A), Source type, 18-point terminal block, 1-wire, Remote device station

NZ2GFCE3-16T*1*2 NEW 16 points, 12/24VDC(0.5A), Sink type, Sensor connector(e-CON), 3-wire, Remote device station

NZ2GFCE3-16TE*1*2 NEW 16 points, 12/24VDC(0.5A), Source type, Sensor connector(e-CON), 3-wire, Remote device station

NZ2GFCM1-16T*1 NEW 16 points, 12/24VDC(0.5A), Sink type, MIL connector, 1-wire, Remote device station

NZ2GFCM1-16TE*1 NEW 16 points, 12/24VDC(0.5A), Source type, MIL connector, 1-wire, Remote device station

Analog-digital converter module NZ2GF2B-60AD44 channels, Input: -10 to 10VDC, Output: DC0 to 20mA, Conversion speed: 400μs(1ms/ch), 18-point terminal block, Remote device station

Digital-analog converter module NZ2GF2B-60DA44 channels, Input: -10 to 10VDC, Output: DC0 to 20mA, Conversion speed: 400μs(1ms/ch), 18-point terminal block, Remote device station

Temperature control moduleNZ2GF2B-60TCTT4 NEW 4 channels, Thermocouple input, Transistor output, 18-point terminal block, Remote device station

NZ2GF2B-60TCRT4 NEW4 channels, Resistance temperature detector, Transistor output, 18-point terminal block, Remote device station

High-speed counter module NZ2GFCF-D62PD2

2channels[Differential input] Counting speed:10kpps/100kpps/200kpps/500kpps/1Mpps/2Mpps/4Mpps/8Mpps,

Count input signal:EIA Standard RS-422-A (Differential line driver)[DC input] Counting speed:10kpps/100kpps/200kpps, Count input signal:5/24VDC 4 to 8mA, Coincidence output:Transistor(sink type), 5 to 24VDC, 0.1A/point, 0.4A/common, 40 pin-connector

*1) A connector for Power supply and FG is required with e-CON and MIL connector type remote I/O module. Please refer to the product manual.*2) A sensor connector is required with e-CON connector type remote I/O module. Please refer to the product manual.

For further details, please refer to the relevant product manuals.

new products digest...provide perfect modules from abundant products line-up! highly support various...

Documents