n type connector
TRANSCRIPT
COPYRIGHT © CMPTER ELECTRONICS 2010
Cable Connectors
Receptacles With Solder End
Protective Caps
N CONNECTORS
... A Vital Part of Connection World
CMPTER
Type N 50 Ohm Coaxial Connectors
#45 ZhongShan East Road, ZhenJiang 212003, JiangSu, ChinaTel : +86-511-8443 6131 Fax : +86-511-8698 8811 Website: www.cmpter.com Email : [email protected]
CMPTER
1
DESCRIPTION
CONTENTS
Description ..............................................................................
Technical data ...........................................................................Interface dimensions ....................................................................
Cable connectors .......................................................................Receptacles with solder end ............................................................PCB connectors .........................................................................Protective cap ...........................................................................Assembly instruction ....................................................................Mounting hole ........................................................................... 21
1
2
34
1516
1114
The development of the Type N connector by the United States Army/Navy ran directly parallel to theesca-lation of U.S. involvement in WWII. It was finally released in 1942, shortly after the U.S. officially ment field and join the coaxial cable of the radio frequency extensively entered the war, and since that time it has been a staple in RF and Microwave applications all over the world.
Due to N type connectors joins by one whorl, it has the characteristic of raliable and strong ant-vibrationnature, machinery and electric performance finely. It is used in vibration and environment abominable radio equipment of terms and instrument and ground launch system join the coaxial cable of the radion frequency extensively.
Type N INTERFACE
#45 ZhongShan East Road, ZhenJiang 212003, JiangSu, ChinaTel : +86-511-8443 6131 Fax : +86-511-8698 8811 Website: www.cmpter.com Email : [email protected]
CMPTER
2
Interface dimensions conformable to the standards:
International: IEC61169-16Europe: CECC 22210USA: MIL-STD-348A/304,
IP rating (interface, mated) IP68
LETTERmm inch
LETTERmm inch
min. max. min. max. min. max. min. max.A 0.13 1.03 .005 .13 A 9.05 9.19 .356 .362
B 2.80 3.56 .110 .140 B 4.75 5.25 .187 .207
C 5.33 5.83 .210 .229 C 1.20 1.95 .047 .077
D 1 2 .016 .066 D 4.4 5.1 .173 .201
E 4.54 5.39 .179 .212 E 6.8 9 .268 .354
F 4.05 4.20 .159 .165 F 10.9 11.2 .429 .441
G 10.23 10.43 .403 .411 G DIA 6.98 7.02 .275 .276
H DIA 8.27 8.37 .326 .329 H DIA 8.03 8.13 .316 .320
J DIA 16.1 16.2 .634 .638 J DIA 8.53 8.73 .336 .344
K DIA 20.9 21 .823 .827 K DIA 15.65 15.85 .616 .624
L DIA 3.01 3.05 .118 .120 L DIA 3.01 3.05 .118 .120
M DIA 1.63 1.67 .064 .066
PLUG JACK
TECHNICAL DATA
#45 ZhongShan East Road, ZhenJiang 212003, JiangSu, ChinaTel : +86-511-8443 6131 Fax : +86-511-8698 8811 Website: www.cmpter.com Email : [email protected]
CMPTER
3
ELECTRICAL DATA
Impedance
Frequency range
Dielectric withsanding voltage
V.S.W.R.
50 Ohm
DC 0 — 11 GHz
2,500 volts rmsstraight connectors: 1.3 max 0-11 GHz; right angle connectors: 1.35 max 0-11 GHz
Insulation resistance
Contact resistance
RF leakage
≥ 5*1000 MΩ
Center Contact 1.0 mΩ Outer Contact 1.0 mΩ
-90 dB minimum at 3 GHz
MECHANICAL DATA
Center Conductor Cale Affixment
Mating
Assembly Torque (body/clamp nut)
Crimps: hex braid crimp;Clamps:screw-thread nut and braid clamp
Crimp: crimp or solder;All others: solder only
5/8-24 threaded coupling
18/22 lb-ft (25/30 N-m)
Braid/Jacket Cable Affixment
ENVIRONMENTAL
Thermal shock
Moisture resistance
Corrosion
TFE: -65°C to +165°C
MIL-STD-202, method 107, test condition A-1
MIL-STD-202, method 106
MIL-STD-202, method 101, test condition B
Temperature Range
MIL-STD-202, Method 204, Condition DVibration
MATERIAL DATA
Female contact
Gasket
Crimp Ferrule
Brass, silver or gold platedPhosphorous bronze or beryllium copper, silver or gold plated Other Metal Parts Brass Silicone rubber
Copper
Male Contact
CABLE CONNECTORS
Straight cable plugs (male)
#45 ZhongShan East Road, ZhenJiang 212003, JiangSu, ChinaTel : +86-511-8443 6131 Fax : +86-511-8698 8811 Website: www.cmpter.com Email : [email protected]
CMPTER
50-03-2M06-001
P/N Cable TypeFinish
BodyCenter
Gold Nickel
Assembly Instruction Notes
Semi-rigid .141/RG402 A01
RoHS
50-03-2M11-002
P/N Cable TypeFinish
BodyCenter
Gold Nickel
Assembly Instruction Notes
Semi-rigid .086/RG405 A01
50-03-2M13-003
P/N Cable TypeFinish
BodyCenter
Gold Nickel
Assembly Instruction Notes
Semi-rigid .250 A01
Cable entry solderedCentre contact soldered
Cable entry solderedCentre contact soldered
Cable entry solderedCentre contact soldered
4
20.0
0 [.7
87 D
IA.]
3.70
[.14
6 D
IA.]
4.00 [.157]
5/8-
24U
NE
F-2B
24.00 [.945]
5/8-
24U
NE
F-2B
23.50 [.925]
20.0
0 [.7
87 D
IA.]
2.20
[.08
7 D
IA.]
3.50 [.138]
6.50
[.25
6 D
IA.]
5/8-
24U
NE
F-2B
20.0
0 [.7
87 D
IA.]
23.60 [.929]
SW 19 [.750 HEX.]
CABLE CONNECTORS
Straight cable plugs (male)
#45 ZhongShan East Road, ZhenJiang 212003, JiangSu, ChinaTel : +86-511-8443 6131 Fax : +86-511-8698 8811 Website: www.cmpter.com Email : [email protected]
CMPTER
50-03-1M04-004
P/N Cable TypeFinish
BodyCenter
Gold Nickel
Assembly Instruction Notes
LMR100/RG174/RG316 A02
RoHS
50-03-1M18-005
P/N Cable TypeFinish
BodyCenter
Gold Nickel
Assembly Instruction Notes
LMR195/RG58 A03
50-03-1M01-006
P/N Cable TypeFinish
BodyCenter
Gold Nickel
Assembly Instruction Notes
LMR400 A03
Cable entry crimp
Cable entry crimpCentre contact soldered
Cable entry crimpCentre contact soldered
5
5/8-
24U
NE
F-2B
25.00 [.984]
20.0
0 [.7
87 D
IA.]
1.70
[.06
7 D
IA.]
3.20
[.12
6 D
IA.]
4.00
[.15
7]
10.00 [.394]
32.50 [1.280]
15.00 [.591] 10.9
0 [.4
29 D
IA.]
12.2
0 [.4
80 D
IA.]
5/8-
24U
NE
F-2B
20.0
0 [.7
87 D
IA.] 7.
5 [.2
95 D
IA.]
5/8-
24U
NE
F-2B
30.30 [1.193]
20.0
0 [.7
87 D
IA.]
3.20
[.12
6 D
IA]
6.25
[.24
6 D
IA]
12.70 [.500]
5.40
[.21
3 D
IA.]
CABLE CONNECTORS
Straight cable plugs (male)
#45 ZhongShan East Road, ZhenJiang 212003, JiangSu, ChinaTel : +86-511-8443 6131 Fax : +86-511-8698 8811 Website: www.cmpter.com Email : [email protected]
CMPTER
50-03-1M10-007
P/N Cable TypeFinish
BodyCenter
Gold Nickel
Assembly Instruction Notes
LMR240 A03
RoHS
50-03-1M19-008
P/N Cable TypeFinish
BodyCenter
Gold Nickel
Assembly Instruction Notes
LMR600 A03
50-03-1M20-009
P/N Cable TypeFinish
BodyCenter
Gold Nickel
Assembly Instruction Notes
LMR300 A03
Cable entry crimpCentre contact soldered
Cable entry crimpCentre contact soldered
Cable entry crimpCentre contact soldered
6
30.00 [1.181]
5/8-
24U
NE
F-2B
20.0
0 [.7
87 D
IA.]
4.2
[.165
DIA
.]
6.80
[.26
8 D
IA.]
8.00
[.31
5 D
IA.]
13.00 [.512]
46.50 [1.831]
5/8-
24U
NE
F-2B
20.0
0 [.7
87 D
IA.]
12.0
0 [.4
72 D
IA.]
15.5
0 [.6
10 D
IA.]
17.0
0 [.6
69 D
AI.]
19.00 [.748]
5.00
[.19
7 D
IA.]
14.00 [.551] 9.40
[.37
0 D
IA.]
8.20
[.32
3 D
IA.]
31.00 [1.220]
5/8-
24U
NE
F-2B
20.0
0 [.7
87 D
IA.]
CABLE CONNECTORS
Straight cable plugs (male)
#45 ZhongShan East Road, ZhenJiang 212003, JiangSu, ChinaTel : +86-511-8443 6131 Fax : +86-511-8698 8811 Website: www.cmpter.com Email : [email protected]
CMPTER
50-03-4M04-010
P/N Cable TypeFinish
BodyCenter
Gold Nickel
Assembly Instruction Notes
LMR100/RG174/RG316 A04
RoHS
50-03-4M18-011
P/N Cable TypeFinish
BodyCenter
Gold Nickel
Assembly Instruction Notes
LMR195/RG58 A04
50-03-4M01-012
P/N Cable TypeFinish
BodyCenter
Gold Nickel
Assembly Instruction Notes
LMR400 A04
Cable entry clamp
Cable entry clampCentre contact soldered
Cable entry clampCentre contact soldered
7
32.50 [1.280]
5/8-
24U
NE
F-2B
20.0
0 [.7
87 D
IA.]
SW 11.00[.433 AF.]
SW 11.00[.433 HEX.]
Centre contact soldered
32.50 [1.280]
5/8-
24U
NE
F-2B
20.0
0 [.7
87 D
IA.]
SW 11.00[.433 AF.]
SW 11.00[.433 HEX.]
38.00 [1.496]
5/8-
24U
NE
F-2B
20.0
0 [.7
87 D
IA.]
SW 16.00[.630 AF.]
SW 16.00[.630 HEX.]
CABLE CONNECTORS
Straight cable plugs (male)
#45 ZhongShan East Road, ZhenJiang 212003, JiangSu, ChinaTel : +86-511-8443 6131 Fax : +86-511-8698 8811 Website: www.cmpter.com Email : [email protected]
CMPTER
50-03-4M19-013
P/N Cable TypeFinish
BodyCenter
Gold Nickel
Assembly Instruction Notes
LMR600 A04
RoHS
50-03-4M25-040
P/N Cable TypeFinish
BodyCenter
Gold Nickel
Assembly Instruction Notes
7/8'' Cable A05
50-03-4M26-039
P/N Cable TypeFinish
BodyCenter
Gold Nickel
Assembly Instruction Notes
1/2'' Cable A06
Cable entry clampCentre contact soldered
Cable entry clampCentre contact soldered
Cable entry clampCentre contact soldered
8
45.50 [1.791]
5/8-
24U
NE
F-2B
20.0
0 [.7
87 D
IA.]
22.0
0 [.8
66 D
IA.]
SW 20.00[.787 AF.]
SW 20.00[.787 AF.]
SW 19.00[.748 HEX.]
5/8-
24U
NE
F-2B
80.80 [3.181]40
.00
[1.5
75 D
IA.]
SW 36.00[1.417 AF.]
SW 36.00[1.417 AF.]
62.80 [2.472]
5/8-
24U
NE
F-2B
20.0
0 [.7
87 D
IA.]
SW 20.00[.787 AF.]
SW 19.00[.748 AF.]
22.3
0 [.8
78 D
IA.]
CABLE CONNECTORS
Right angle cable plugs (male)
#45 ZhongShan East Road, ZhenJiang 212003, JiangSu, ChinaTel : +86-511-8443 6131 Fax : +86-511-8698 8811 Website: www.cmpter.com Email : [email protected]
CMPTER
50-13-2M06-016
P/N Cable TypeFinish
BodyCenter
Gold Nickel
Assembly Instruction Notes
RG402/Semi-rigid .141 A07
RoHS
50-13-1M04-017
P/N Cable TypeFinish
BodyCenter
Gold Nickel
Assembly Instruction Notes
LMR100/RG174/RG316 A08
50-13-1M10-018
P/N Cable TypeFinish
BodyCenter
Gold Nickel
Assembly Instruction Notes
LMR240 A08
Cable entry soldered
Cable entry crimpCentre contact soldered
Cable entry crimpCentre contact soldered
9
Centre contact soldered
5/8-
24U
NE
F-2B
20.0
0 [.7
87 D
IA.]
3.70 [.146 DIA.]
9.50
[.37
4]
9.50 [.374]
24.25 [.955]
29.00 [1.142]
3.20
[.12
6 D
IA.]
4.00
[.15
7 D
IA.]
10.00 [.394]
28.80 [1.134]
5/8-
24U
NE
F-2B
20.0
0 [.7
87 D
IA.]
19.5
0 [.7
68]
1.65 [.065 DIA.]
4.2 [.165 DIA.]
15.0
0 [.5
91 D
IA.]
25.0
0 [.9
84]
6.80
[.26
8 D
IA.]
8.00
[.31
5 D
IA.]
13.00 [.512]
31.50 [1.240]
5/8-
24U
NE
F-2B
20.0
0 [.7
87 D
IA.]
CABLE CONNECTORS
Right angle cable plugs (male)
#45 ZhongShan East Road, ZhenJiang 212003, JiangSu, ChinaTel : +86-511-8443 6131 Fax : +86-511-8698 8811 Website: www.cmpter.com Email : [email protected]
CMPTER
50-13-1M01-019
P/N Cable TypeFinish
BodyCenter
Gold Nickel
Assembly Instruction Notes
LMR400 A08
RoHS
50-13-4M01-020
P/N Cable TypeFinish
BodyCenter
Gold Nickel
Assembly Instruction Notes
LMR400 A04
50-13-4M26-041
P/N Cable TypeFinish
BodyCenter
Gold Nickel
Assembly Instruction Notes
1/2'' Cable A06
Cable entry crimpCentre contact soldered
Cable entry clampCentre contact soldered
Cable entry clampCentre contact soldered
10
32.00 [1.260]
5/8-
24U
NE
F-2B
20.0
0 [.7
87 D
IA.]
7.5 [.295 DIA.]28
.50
[1.1
22]
15.00 [.591]
10.9
0 [.4
29 D
IA.]
12.2
0 [.4
80 D
IA.]
5/8-24UNEF-2B
20.00 [.787 DIA.]
SW 19.00[.748 HEX.]
22.3
0 [.8
78 D
IA.]
65.75 [2.589]SW 19.00[.748 HEX.]
35.4
0 [1
.394
]
17.50 [.689]
SW 16.00[.630 AF.]
SW 16.00[.630 HEX.]
18.0
0 [.7
09 D
IA.]
5/8-24UNEF-2B
20.00 [.787 DIA.]
58.20 [2.292]
39.4
0 [1
.551
]
17.50 [.689]
CABLE CONNECTORS
Straight cable jacks (female)
#45 ZhongShan East Road, ZhenJiang 212003, JiangSu, ChinaTel : +86-511-8443 6131 Fax : +86-511-8698 8811 Website: www.cmpter.com Email : [email protected]
CMPTER
50-02-1M18-022
P/N Cable TypeFinish
BodyCenter
Gold Nickel
Assembly Instruction Notes
RG58/LMR195 A03
RoHS
50-02-1M01-023
P/N Cable TypeFinish
BodyCenter
Gold Nickel
Assembly Instruction Notes
LMR400 A03
50-02-1M10-024
P/N Cable TypeFinish
BodyCenter
Gold Nickel
Assembly Instruction Notes
LMR240 A03
Cable entry crimp
Cable entry crimpCentre contact soldered
Cable entry crimpCentre contact soldered
11
Centre contact soldered
5/8-
24U
NE
F-2A
27.80 [1.094]
6.25
[.24
6 D
IA]
12.70 [.500]
5.40
[.21
3 D
IA.]
3.20
[.12
6 D
IA]
15.00 [.591] 10.9
0 [.4
29 D
IA.]
12.2
0 [.4
80 D
IA.]
7.5
[.295
DIA
.]
5/8-
24U
NE
F-2A
33.30 [1.311]
4.2
[.165
DIA
.]
6.80
[.26
8 D
IA.]
8.00
[.31
5 D
IA.]
13.00 [.512]
5/8-
24U
NE
F-2A
29.80 [1.173]
CABLE CONNECTORS
Straight cable jacks (female)
#45 ZhongShan East Road, ZhenJiang 212003, JiangSu, ChinaTel : +86-511-8443 6131 Fax : +86-511-8698 8811 Website: www.cmpter.com Email : [email protected]
CMPTER
50-02-4M01-025
P/N Cable TypeFinish
BodyCenter
Gold Nickel
Assembly Instruction Notes
LMR400 A04
RoHS
50-02-4M18-026
P/N Cable TypeFinish
BodyCenter
Gold Nickel
Assembly Instruction Notes
LMR195/RG58 A04
50-02-4M26-027
P/N Cable TypeFinish
BodyCenter
Gold Nickel
Assembly Instruction Notes
1/2'' Cable A06
Cable entry clampCentre contact soldered
Cable entry clampCentre contact soldered
Cable entry clampCentre contact soldered
12
SW 16.00[.630 AF.]
5/8-
24U
NE
F-2A
41.40 [1.630]
18.0
0 [.7
09 D
IA.]
SW 16.00[.630 AF.]
5/8-
24U
NE
F-2A
56.80 [2.236]
SW 19.00[.748 HEX.]
22.3
0 [.8
78 D
IA.]
SW 19.00[.748 HEX.]
5/8-
24U
NE
F-2A
35.50 [1.398]
SW 11.00[.433 AF.]
SW 11.00[.433 HEX.]
15.9
0 [.6
26 D
IA.]
CABLE CONNECTORS
Straight bulkhead cable jacks (female)
#45 ZhongShan East Road, ZhenJiang 212003, JiangSu, ChinaTel : +86-511-8443 6131 Fax : +86-511-8698 8811 Website: www.cmpter.com Email : [email protected]
CMPTER
50-02-1D18-028
P/N Cable TypeFinish
BodyCenter
Gold Nickel
Assembly Instruction Mount Hole
RG58/LMR195 A03
RoHS
50-02-1D04-029
P/N Cable TypeFinish
BodyCenter
Gold Nickel
Assembly Instruction Mount Hole
LMR100/RG174/RG316 A02
50-02-2D06-030
P/N Cable TypeFinish
BodyCenter
Gold Nickel
Assembly Instruction Mount Hole
LMR240 A09
Cable entry crimp
Cable entry solderedCentre contact soldered
Cable entry crimp
13
Centre contact soldered
31.20 [1.228]
5/8-
24U
NE
F-2A
19.50 [.768]
22.0
0 [.8
66]
MAX. 4.50 [MAX. .177]
1.70
[.06
7 D
IA.]
3.20
[.12
6 D
IA.]
4.00
[.15
7]
10.00 [.394]
SW 13.50 [.531 AF]
MAX. 7.00 [MAX. .276]
SW 13.50 [.531 AF]
6.25
[.24
6 D
IA]
12.70 [.500]
5.40
[.21
3 D
IA.]35.20 [1.386]
5/8-
24U
NE
F-2A 3.
20 [.
126
DIA
.]
22.00 [.866]
22.0
0 [.8
66]
SW 13.50 [.531 AF]
SW 13.50 [.531 AF]
33.20 [1.307]
5/8-
24U
NE
F-2A
22.00 [.866]
22.0
0 [.8
66]
MAX. 7.00 [MAX. .276]
3.70
[.14
6 D
IA.]
M01
M01
M01
CABLE CONNECTORS
Straight panel cable jacks(female)
#45 ZhongShan East Road, ZhenJiang 212003, JiangSu, ChinaTel : +86-511-8443 6131 Fax : +86-511-8698 8811 Website: www.cmpter.com Email : [email protected]
CMPTER
50-02-8F18-031
P/N Cable TypeFinish
BodyCenter
Gold Nickel
Assembly Instruction Mount Hole
LMR195/RG58 A03
RoHS
50-02-8F01-032
P/N Cable TypeFinish
BodyCenter
Gold Nickel
Assembly Instruction Mount Hole
LMR400 A03
50-02-8F01-033
P/N Cable TypeFinish
BodyCenter
Gold Nickel
Assembly Instruction Mount Hole
LMR400 A04
Cable entry crimpCentre contact soldered
Cable entry clampCentre contact soldered
Cable entry crimpCentre contact soldered
14
27.20 [1.071]
5/8-
24U
NE
F-2A
2.00 [.079]3.
20 [.
126
DIA
.]
18.70 [.736] 25.40 [1.000 SQ.]18.25 [.719]
18.2
5 [.7
19]
4- 3.25 [.128 DIA.]
6.25
[.24
6 D
IA]
12.70 [.500]
5.40
[.21
3 D
IA.]
33.00 [1.299]
5/8-
24U
NE
F-2A
2.00 [.079]
18.70 [.736] 25.40 [1.000 SQ.]18.25 [.719]
18.2
5 [.7
19]
4- 3.25 [.128 DIA.]
15.00 [.591] 10.9
0 [.4
29 D
IA.]
12.2
0 [.4
80 D
IA.]
7.5
[.295
DIA
.]
39.10 [1.540]
5/8-
24U
NE
F-2A
2.00 [.079]
18.70 [.736] 25.40 [1.000 SQ.]18.25 [.719]
18.2
5 [.7
19]
4- 3.25 [.128 DIA.]
SW 16.00[.630 AF.]
SW 16.00[.630 HEX.]
4-6.0
0 [.23
6 DIA.]
M02
M02
M02
RECEPTACLES WITH SOLDER END
Receptacles, jacks (female)
#45 ZhongShan East Road, ZhenJiang 212003, JiangSu, ChinaTel : +86-511-8443 6131 Fax : +86-511-8698 8811 Website: www.cmpter.com Email : [email protected]
CMPTER
50-02-8F7-034
P/N Mount HoleFinish
BodyCenter
Gold Nickel
Notes
M03
RoHS
50-02-8F7-035
P/N Mount HoleFinish
BodyCenter
Gold Nickel
Notes
M03
50-02-8F1-036
P/N Mount HoleFinish
BodyCenter
Gold Nickel
Notes
M02
Panel mounted
Panel mounted
Panel mounted
15
5/8-
24U
NE
F-2A
9.00 [.354]15.00 [.591] 17.50 [.689 SQ.]
12.70 [.500]
12.7
0 [.5
00]
4- 3.10 [.122 DIA.]
1.27
[.05
0 D
IA.]
4.10
[.16
1 D
IA.]33.70 [1.327]
1.60 [.063]
17.50 [.689 SQ.]
12.70 [.500]
12.7
0 [.5
00]
4- 3.10 [.122 DIA.]
1.50 [.059]
5/8-
24U
NE
F-2A
9.50 [.374]
2.00 [.079]
1.27
[.05
0 D
IA.]
4.10
[.16
1 D
IA.]
29.80 [1.173]
5/8-
24U
NE
F-2A
2.00 [.079]
27.30 [1.075] 25.40 [1.000 SQ.]18.25 [.719]
18.2
5 [.7
19]
4- 3.25 [.128 DIA.]16.80 [.661]
6.50 [.256]
2.40
[.09
4 D
IA.]
3.00
[.11
8 D
IA.]
RECEPTACLES WITH SOLDER END
Receptacles, jacks (female)
#45 ZhongShan East Road, ZhenJiang 212003, JiangSu, ChinaTel : +86-511-8443 6131 Fax : +86-511-8698 8811 Website: www.cmpter.com Email : [email protected]
CMPTER
50-02-8F2-037
P/N Mount HoleFinish
BodyCenter
Gold Nickel
Notes
M03
RoHS
50-02-8A1-038
P/N Mount HoleFinish
BodyCenter
Gold Nickel
Notes
M04
Panel mounted
Panel mounted
16
0.46
[.01
8]
17.50 [.689 SQ.]
12.70 [.500]
12.7
0 [.5
00]
4- 3.10 [.122 DIA.]
17.00 [.669]
5/8-
24 U
NE
F-2A 3.
00 [.
118
DIA
.]22.00 [.866]
3.00 [.118]
5/8-
24U
NE
F-2A
2.40
[.09
4 D
IA.]
3.00
[.11
8 D
IA.]
MAX. 2.5 [MAX. .098]
16.60 [.653]
29.60 [1.165]
6.00 [.236]
5/8-
24U
NE
F-2A
27.2
0 [1
.071
]
1.70 [.067 DIA.]SW 19 [.748 HEX.]
PROTECTIVE CAPS
#45 ZhongShan East Road, ZhenJiang 212003, JiangSu, ChinaTel : +86-511-8443 6131 Fax : +86-511-8698 8811 Website: www.cmpter.com Email : [email protected]
CMPTER
50-03-9N-042
P/N Finish
Nickel
Notes
RoHS
50-02-9N-043
P/N Notes
Protective cap for jacks (females)
Protective cap for plugs (males)
17
Finish
Nickel
4 [.157 DIA.]
80 [3
.150
]
5/8-
24U
NE
F-2B
19.70 [.776]20
.00
[.787
DIA
.]20
.00
[.787
]
4 [.157 DIA.]
80 [3
.150
]
5/8-
24U
NE
F-2A
20.50 [.807]
1
ASSEMBLY INSTRUCTIONS
A01
#45 ZhongShan East Road, ZhenJiang 212003, JiangSu, ChinaTel : +86-511-8443 6131 Fax : +86-511-8698 8811 Website: www.cmpter.com Email : [email protected]
CMPTER
18
50-03-2M06-001
P/NStripping Length (mm [in])
aNotes
5.0 [.197]
50-03-2M11-002
50-03-2M13-003
3.5 [.138]
5.5 [.217]
Cable Type
Semi-rigid .141/RG402
Semi-rigid .086/RG405
Semi-rigid .250
BodyCenter Contact
Heatshrink sleeve(option)
1. Slide the heatshrink sleeve onto the cable (option).Strip the cable as Striping Dimensions.
21
2. Slide the center contact on until it bottom against the cable dielectric.
Solder the center contact onto the cable.
1
2
3. Slide the cable into the body until it stops.
4. Solder the body onto the cable.
1
5. Slide the heatshrink sleeve over the body and heatshrink it in place (option).
1
aStripping Dimensions
ASSEMBLY INSTRUCTIONS
A02
#45 ZhongShan East Road, ZhenJiang 212003, JiangSu, ChinaTel : +86-511-8443 6131 Fax : +86-511-8698 8811 Website: www.cmpter.com Email : [email protected]
CMPTER
Body
Heatshrink sleeve(option)
1. Slide the heatshrink sleeve onto the cable (option).Slide the ferrule onto the cable.
2. Slide the guide pin on until it bottom against the cable dielectric.
Solder the guide pin onto the cable.
1
2
3. Fan the braid.
4. Slide the cable into the body until stops.
5. Slide the ferrule over the braid.
a
Stripping Dimensions
bc
19
Ferrule
3
12
Strip the cable as Striping Dimensions.
1
13 [.512]
P/NHEX. Crimp Tool (mm [in])
Stripping Length (mm [in])
ba
3.25 [.128] 3.5 [.138]
cCable Type
50-02-1D04-029LMR100/RG174/RG316
50-03-1M04-0043 [.118]
Guide Pin
6. Cut the excess of braid if necessary.
Crimp the ferrule with crimping tool (see table).
1
1
2
2 1
Slide the sleeve over the ferrule and heatshrinkit in place (option).
ASSEMBLY INSTRUCTIONS
A03
#45 ZhongShan East Road, ZhenJiang 212003, JiangSu, ChinaTel : +86-511-8443 6131 Fax : +86-511-8698 8811 Website: www.cmpter.com Email : [email protected]
CMPTER
20
a
Stripping Dimensions
bc
BodyCenter Contact
Heatshrink sleeve(option)
Ferrule
2. Slide the center contact on until it bottom against the cable dielectric.
Solder the center contact onto the cable.
1
2
3. Fan the braid.
4. Slide the cable into the body until stops.
3
1 2
1. Slide the heatshrink sleeve onto the cable (option).Slide the ferrule onto the cable.Strip the cable as Striping Dimensions.
1
5. Slide the ferrule over the braid.Crimp the ferrule with crimping tool (see table).
1
1
2
2 1
6. Cut the excess of braid if necessary.Slide the sleeve over the ferrule and heatshrinkit in place (option).
P/NHEX. Crimp Tool (mm [in])
Stripping Length (mm [in])
ba cCable Type
50-03-1M20-009
LMR240
50-02-1M18-022
50-03-1M19-008
50-03-1M10-007
50-03-1M01-006
50-03-1M18-005
LMR195/RG58 5.41 [.213]
6.8 [.268]
10.9 [.429]
3 [.118] 13.5 [.531]
2 [.079]
2.5 [.098]
5 [.118] 18 [.709]
5.5 [.217]
LMR600
LMR300
50-02-1M01-023LMR400
50-02-1M10-024
15.8 [.625] 6 [.236] 3 [.118] 23 [.906]
4 [.157]19 [.748]
8.2 [.323]3 [.118]
50-02-8F01-032 5 [.118]
50-02-8F18-031
50-02-1D18-028
1
2
2
1
ASSEMBLY INSTRUCTIONS
A04
#45 ZhongShan East Road, ZhenJiang 212003, JiangSu, ChinaTel : +86-511-8443 6131 Fax : +86-511-8698 8811 Website: www.cmpter.com Email : [email protected]
CMPTER
21
Body
Nut
Washer
2. Fold the braid back.Insert the insert sleeve into the cable (under thebraid) until the back surface flush with the cabledielectric.
4. Slide the nut over the cable assembly.
2
1
1. Slide the nut, the washer, the rubber and another washer onto the cable.
Strip the cable as Striping Dimensions.
5. Screw sub-assembly into the body with wrench, recommended coupling torque see table.
1
a
Stripping Dimensionsc
b
Center Contact
Rubber Insert Sleeve
3. Slide the center contact on until it bottom against the cable dielectric. Solder the center contact.
1
6 [.236] 13 [.512] 13 [.512]
P/NStripping Length (mm [in])
ba cCable Type
3 [.118] 6 [.236]
RecommendedCoupling Torque
450N·cm
6 [.236]
5 [.197] 11 [.433] 11 [.433]50-13-4M01-020
50-03-4M18-011
50-03-4M01-012
50-03-4M04-010
50-03-4M19-013
50-02-8F01-033
50-02-4M01-025
50-02-4M18-026LMR195/RG58
LMR600
LMR100/RG174/RG316
LMR400
ASSEMBLY INSTRUCTIONS
A05
#45 ZhongShan East Road, ZhenJiang 212003, JiangSu, ChinaTel : +86-511-8443 6131 Fax : +86-511-8698 8811 Website: www.cmpter.com Email : [email protected]
CMPTER
22
BodyBack Nut
O-Ring
P/N Stripping Length (mm [in])Cable Type RecommendedCoupling Torque
800N·cm50-03-4M25-040 7/8'' Cable See Figure
1. Stripping dimensions as shown, Several problems should be paid attention in stripping:
(a) The end of the outer conductor’s stripping should be on the wave peak.(b) The end surface of the dielectric should be chamfered to 1mmx45°(c) Removing the burr at the inner conductor’s inside lip(d) The end of the jacket surface should be chamfered to 0.5mmx45°.(e) Removing impurities such as copper scale and burr at the end of the cable surface.
22mm
0.5mmx45°
1mmx45°
Peak
2. Put the O-ring in the trough of the cable as shown.
O-Ring
Expand Section
Clamp
Outer Conductor
3. Screw off the back nut, assemble the back nut to the cable and make sure that the clamp is in the trough of the cable as shown by the following figure, flare the outer conductor of the cable so as to make sure that the outer conductor touch slanting surface of the inside hole at the clamp as shown.
4. Combine the main body and back nut by screwing as shown.
Keep the back nut and the cable motionless, then tighten the main body and back nuts with a wrench.
ASSEMBLY INSTRUCTIONS
A06
#45 ZhongShan East Road, ZhenJiang 212003, JiangSu, ChinaTel : +86-511-8443 6131 Fax : +86-511-8698 8811 Website: www.cmpter.com Email : [email protected]
CMPTER
23
BodyBack Nut
O-Ring
1. Stripping dimensions as table, Several problems should be paid attention in stripping:
(a) The end of the outer conductor’s stripping should be on the wave peak.(d) Inner conductor should be chamfered to 1mmx45°.(e) Removing impurities such as copper scale and burr at the end of the cable surface.
1mmx45°
Peak
2. Put the O-ring in the trough of the cable as shown.
O-Ring
Expand Section
Clamp
Outer Conductor
3. Screw off the back nut, assemble the back nut to the cable and make sure that the clamp is in the trough of the cable as shown by the following figure, flare the outer conductor of the cable so as to make sure that the outer conductor touch slanting surface of the inside hole at the clamp as shown.
4. Combine the main body and back nut by screwing as shown.
Keep the back nut and the cable motionless, then tighten the main body and back nuts with a wrench.
P/NStripping Length (mm [in])
ba cCable Type
10 [.394] 18 [.709]
RecommendedCoupling Torque
800N·cm28 [1.102]50-02-4M26-027
50-03-4M26-039
50-13-4M26-041
1/2'' Cable
Striping Dimensions
ab(c)
1
ASSEMBLY INSTRUCTIONS
A07
#45 ZhongShan East Road, ZhenJiang 212003, JiangSu, ChinaTel : +86-511-8443 6131 Fax : +86-511-8698 8811 Website: www.cmpter.com Email : [email protected]
CMPTER
24
Back Nut
Heatshrink sleeve(option)
1
Body
P/N Stripping Length (mm [in])Cable Type Notes
50-13-2M06-016 RG402/Semi-rigid .141 5.5 [.217]
aStripping Dimensions
1. Slide the heatshrink sleeve onto the cable (option).Strip the cable as Striping Dimensions.
21
2. Slide the cable into the body until it stops.Solder the inner conductor.
1
2
3. Screw the back nut onto the body.
4. Slide the sleeve over the body and heatshrink it in place (option).
ASSEMBLY INSTRUCTIONS
A08
#45 ZhongShan East Road, ZhenJiang 212003, JiangSu, ChinaTel : +86-511-8443 6131 Fax : +86-511-8698 8811 Website: www.cmpter.com Email : [email protected]
CMPTER
Heatshrink sleeve(option)
1. Slide the heatshrink sleeve onto the cable (option).Slide the ferrule onto the cable.
3. Push the body under the braid.Slide the ferrule over the braid.
2. Fan the braid.
4. Crimp the ferrule with crimping tool (see table).
5. Place the cap into the body.
a
Stripping Dimensions
bc
25
Ferrule
3
12
Strip the cable as Striping Dimensions.
1
6. Press on the cap until stops.Slide the sleeve over the ferrule and heatshrinkit in place (option).
Body
Cap
11
21
Solder the inner conductor.
1
2 1
3.25 [.128]
4 [.157]
3 [.118]
5 [.197]
16 [.630]
23 [.906]
P/NHEX. Crimp Tool (mm [in])
Stripping Length (mm [in])
ba cCable Type
50-13-1M01-019
LMR24050-13-1M10-018
50-13-1M04-0176.8 [.268]
10.9 [.429]
3 [.118]20 [.787]
5 [.197]
LMR400
LMR100/RG174/RG316
ASSEMBLY INSTRUCTIONS
A09
#45 ZhongShan East Road, ZhenJiang 212003, JiangSu, ChinaTel : +86-511-8443 6131 Fax : +86-511-8698 8811 Website: www.cmpter.com Email : [email protected]
CMPTER
Heatshrink sleeve(option)
26
Body
aStripping Dimensions
P/N Stripping Length (mm [in])Cable Type Notes
50-02-2D06-030 RG402/Semi-rigid .141 4.5 [.177]
1. Slide the heatshrink sleeve onto the cable (option).Strip the cable as Striping Dimensions.
21
1
2. Slide the cable into the body until it stops.
3. Solder the body onto the cable.
1
4. Slide the heatshrink sleeve over the body and heatshrink it in place (option).
1
MOUNTING HOLES
#45 ZhongShan East Road, ZhenJiang 212003, JiangSu, ChinaTel : +86-511-8443 6131 Fax : +86-511-8698 8811 Website: www.cmpter.com Email : [email protected]
CMPTER
27
16.20 [.638 DIA.]
13.90 [.547]
M01
18.25 [.719]
18.2
5 [.7
19]
3.50 [.138 DIA.]
16.10 [.634 DIA.]
M02
12.7
0 [0
.500
]
4.20 [.165 DIA.]
12.70 [0.500]4- 3.30 [.130 DIA.]
M03
16.10 [.634 DIA.]
14.60 [.575]
M04
Office Adress: #45 ZhongShan East Road, ZhenJiang, JiangSu China.
Tel:+86 511 8443 6131 Fax:+86 511 8502 5485
Email: [email protected] Website: http://www.cmpter.com
Cmpter Electronics, Ltd.