NetStreamNetStream Product Family Overview Product Family Overview

2 NetStream PtP Product portfolio

• Carrier-class Point-to-Point Wireless Broadband radios in sub-6 GHz

range

• Ultra Capacity – up to 200 Mbps net aggregate throughput

• Native TDM (up to 16 E1s/T1s) + Ethernet over single wireless

platform

• Extended Range - up to 120 km/75 miles

• Multi-Band feature - 2.4 GHz & 4.8-6.0 GHz in one radio

• Extremely Simple to Install – up & running in hours

3 NetStream PtP Product portfolio

• Advanced Technologies - MIMO, OFDM & Diversity

together with Netronics proprietary air interface

• Durable & Robust – operation in tough conditions

including nLOS, interference and extreme temperatures

• 1+1 Monitored Hot Standby Support

• Point-to-Point & Multiple Point-to-Point deployment

configuration available

• Most competitive price

• Long range (up to 120Km)

• Secured and encrypted traffic

• High Tx Power of 25dBm - high performance with smaller

antennas

• Multi band (Combo) solution - single product for multiple

bands and regulations

4 NetStream Solution Architecture

ODURadio link

ODU

IDU-C IDU-C

5 Product Spec - ODU

Duplex Technique TDD

Modulation OFDM – BPSK/QPSK/16QAM/64QAM, MIMO 2x2

Max Data Rate

Two chains: 130/270 Mbps at 10/20/40 MHz (Up to 100 Mbps FD throughput or 100Mbps Asymmetric)

Single chain: 65 Mbps at 10/20/40 (Up to 50 Mbps throughput)

Max Tx Power 25 dBm

Error Correction FEC k=1/2, 2/3, 3/4, 5/6

Encryption AES 128

Dimensions Connectorized: 19.5(w) x 27.0(h) x 8.0(d) cm

Integrated: 37.1(w) x 37.1(h) x 11.0(d) cm

Weight Connectorized: 1.8 kg / 3.6 lbs

Integrated: 3.5 kg / 7 lbs

Power Consumption

<35W (ODU+IDU)

Operating Temperature

Standard: -35°C to +60°C / -31°F to +140°F

Humidity Up to 100% non-condensing, IP67

6 Product Spec – IDU-C (2)

TDM Interface

Number of Ports 16,8,4 or 0

Type E1/T1 configurable

Framing Unframed (transparent)

TimingIndependent timing per port, Tx and Rx

Connector RJ-45

Standards Compliance ITU-T G.703, G.826

Line CodeE1: HDB3 @ 2.048 Mbps, T1: B8ZS/AMI @ 1.544 Mbps

Latency Configurable 5-20 msec

ImpedanceE1: 120Ω, balanced T1: 100Ω, balanced

Jitter & WanderAccording to ITU-T G.823, G.824

IDU-C

7 Product Spec - ODU

Ethernet Interface

Ethernet ports

2 in IDU; 1 in PoE device

10/100BaseT with Auto-Negotiation (IEEE 802.3u)

Framing/Coding IEEE 802.3

Line Impedance 100 ΩConnector RJ-45

SFP port Supported via external device

VLAN Support Transparent

Maximum Frame Size

2048 Bytes

Latency 3 m/sec (typical)

Power Feeding 20-60 VDC

Operating Temperature

0°C to +40°C

Humidity Up to 95% non-condensing

IDU-C

8 System Components: PoE Units

PoE Device

LAN Interface

Number of Ports 1

Framing/Coding IEEE 802.3/U

Max Frame Size 2000 Bytes

Latency 3 msec (typical at 20MHz channel)

Line Impedance 100VLAN Support Transparent

Connector RJ-45

Power Feeding AC/DC, 47-63 Hz

Operating Temperature

0°C to +40°C

Humidity Up to 95% non-condensing

9 Product Spec – Antennas

Integrated Antennas

Multi-band 5.x and 4.9 GHz

Flat panel 37x37cm

23dBi at 5.x GHz 19dBi at 4.9 GHz

8° beam width

Multi-band 2.3-2.4 GHz

Flat panel 37x37cm

17.5dBi

16° beam width

External Antennas2ft Dish Dual Polarization

Frequency 5.250 - 6.000 GHz

Gain 28 dBi

Diameter 2 ft / 620 mm

Beam Width H,V: 5o

1ft Flat Panel Dual Polarization

Frequency 2.4 – 2.7 GHz

Gain 19 dBi

Dimensions 37 x 37 cm

Beam Width 16°

10

NetStream Family Portfolio in a Glance

NetStream Family Portfolio offers three product series:

• Netronics 5x200 Series (200 Mbps, 192 Mbps in one direction)• Netronics 5x50 Series (50 Mbps, 45.5 Mbps in one direction)• Netronics 5x36 Series (36 Mbps, 18 Mbps in each direction)• Netronics 5x25 Series (25 Mbps, 22.6 Mbps in one direction)• Netronics 5x10 Series (10 Mbps, 9.2 Mbps in one direction)• Netronics 5x06 Series (12 Mbps, 6 Mbps in one direction)

11

NetStream 5x100-200 Portfolio in a Glance

Product Series Through put Application

NetStream 5x200 100 Mbps net aggregate @ 20 MHz200 Mbps net aggregate @ 40 MHzSupports up to 16 E1 lines

IP backhaul

NetStream 5x50 50 Mbps net aggregate @ 20 MHzSupports up to 8 E1 lines

IP backhaul + TDM

NetStream 5x36 18 Mbps Symmetrical @ 20 MHz(36 Mbps total in both directions)Supports up to 4 E1 lines

IP backhaul + TDM

NetStream 5x25 25 Mbps net aggregate @ 20 MHzSupports up to 3 E1 lines

IP backhaul + TDMAccess

NetStream 5x10 10 Mbps net aggregate @ 20 MHz Access

NetStream 5x06 12 Mbps Symmetrical @ 20 MHz(6 Mbps total in both directions)

Access

12 Ethernet Services

• 2 Ethernet interfaces.

• 10/100BaseT with auto-negotiation (IEEE 802.3).

• Layer 2 Ethernet bridge.

• Self-learning of up to 512 MAC address (PoE) (IEEE 802.1Q).

• Self-learning of up to 1024 MAC address (IDU) (IEEE 802.1Q).

• Up to 100Mbps symmetrical net throughput.

• VLAN transparent (Management VLAN supported).

• Latency < 3msec.

• Retry mechanism for loss-less connection (Fast ARQ).

• Support up to 2000 bytes frames (all configurations).

13 TDM (E1/T1) Services

• 1 to 16 E1/T1 interfaces.• Standard E1/T1, compliant with ITU-T standards

Unframed. • BER < 1x10-11 @ sensitivity threshold.• Accurate clock recovery mechanism (<50 PPB).• One way delay < 8msec (typical).• Advanced clock configurations include Multiple

clocks support.

14 Modulations and capacity

ModulationAir Rate

(Mbps)Throughput

( Mbps)TX power

(dBm)

Sensitivity (dBm) @BER < 10e-11

(20MHz)Notes

BPSK½ 6.5 -- 25 -88 Installation mode

QPSK½ 13 5 25 -86 Single Mode

QPSK¾ 19.5 7.6 25 -83 Single Mode

16 QAM½ 26 10.3 24 -81 Single Mode

16 QAM¾ 39 15.6 21 -80 Single Mode

64 QAM 2/3 52 21 19 -72 Single Mode

64 QAM¾ 58.5 23.6 18 -70 Single Mode

64 QAM 5/6 65 25.9 18 -67 Single Mode

2X BPSK½ 13 4.9 25 -88 Dual Mode MIMO

2X QPSK½ 26 10.2 25 -86 Dual Mode MIMO

2X QPSK¾ 39 15.5 25 -83 Dual Mode MIMO

2X 16 QAM½ 52 20.8 24 -81 Dual Mode MIMO

2X 16 QAM¾ 78 30.7 21 -80 Dual Mode MIMO

2X 64 QAM 2/3 104 41.3 19 -72 Dual Mode MIMO

2X 64 QAM¾ 117 46.6 18 -70 Dual Mode MIMO

2X 64 QAM 5/6 130 51.7 18 -67 Dual Mode MIMO

15 Netronics 5x200 Series

• Ultra-Capacity Up to 100 Mbps Asymmetric Throughput – dynamic traffic

allocation between uplink & downlink based on traffic loads & air-interface conditions

Up to 200 Mbps net aggregate throughput in 40 MHz channel • Optimized for high-capacity IP backhaul applications

• Native TDM (up to 16 E1s/T1s) + Ethernet; Seamless migration from TDM to all-IP networks

• Superior OFDM, MIMO and Diversity technologies

• Multi-Band feature – 2.4 GHz & 4.8-6.0 GHz frequencies in one radio

• Easy to install, simple to maintain

16

Netronics 5x200 SeriesTotal Throughput Performance

Asymmetric traffic mode enables

• Up to double capacity per direction

• Greater range for given capacity

• Greater capacity and link robustness per given range

17 Netronics 5x50 Series

• Up to 50 Mbps net aggregate throughput• Flexible combination of native TDM (up to 16 E1s/T1s) +

Ethernet, supporting converged IP + TDM networks. • Long range - up to 120 Km/75 miles• Single radio supporting multiple bands • Advanced MIMO, OFDM and

Diversity technologies

18

Netronics 5x50 SeriesEthernet Performance

19

Netronics 5x200 Series Range Performance (E1s)

20

Netronics 5x200 Series Range Performance (T1s)

21 Best Spectral Efficiency

• Spectral efficiency is the Throughput per Used Spectrum.

• Netronics 5x100 achieves best spectral efficiency by:

• Using MIMO.

• Adding OFDM sub carriers.

• Using additional 5/6 coding rate for 64 QAM modulation.

• By utilizing efficient frame aggregation and increased frame size.

22 Dealing with interferences

• Patented Air Interface.

• Directional antennas.

• ACS (Automatic Channel Selection).

• Adaptive modulation (automatic adaptive rate).

• OFDM based air-interface, enabling N-LOS deployments.

• Diversity mode.

• Smart FEC.

• Patented ARQ.

• HSS (synchronization of multiple links).

• Configurable jitter buffer.

• Spectrum Viewer

23

ACS (Automatic Channel Selection)

• Automatic selection of “best-quality” channel (based on PER). • Enhanced robustness and higher performance.

24 Automatic Adaptive Rate

• The system changes air interface rate and modulation dynamically, depending on radio link conditions.

• Benefits:• Maximization of Ethernet throughput.• Enhanced robustness.• Better performance in interference.

25 OFDM

• OFDM 54 Carriers.• Designed for NLOS deployments.• Enables connectivity via reflections in Radio path.• Enhanced by patented protocol to supports both TDM and ETH services.

54 sub carriers

26 Hub Site Synchronization

• No more limitations.• HSS between

• Netronics 5x100 radios. • NetStream 5x36 radios. • Netronics 5x100 and NetStream 5x36 radios.

• HSS up to 16 radios in a site.• Fully supported by Netronics Manager .• Supported by software upgrade to Netronics 5x100

install base.

• All Netronics 5x100 radios in the field are HW ready for HSS.

27 HSS Applications

Backhaul • HSS is needed in installations where a Netronics 5x100 link is the

backhaul for many lower capacity access links.• The backhaul link can be synchronized to the access links to

mitigate potential mutual interference.

Access and Corporate Connectivity • Where any links originate from a common hub site.• With HSS by Netronics 5x100 such applications now

support high capacity connectivity.

28 HSS Applications

Attack Plan• Identify existing customers with mixed network of NetStream 5x36 and

Netronics 5x100. • Propose the HSS solution for mixed deployment.

29 Monitored Hot Standby (MHS) 1+1

• Providing redundancy and backup to TDM services- Targeted for Cellular backhaul.

• Providing protection against:• Equipment failure (ODU and IDU).• Loss of air interface.

• Using a primary link and a secondary link can be done with:

• Two Netronics 5x100 links.• A Netronics 5x100 link and a

NetStream 5x36 link with new IDU-C.• Two NetStream 5x36 links with new

IDU-C (single dual-pol antenna can be used).

30 MHS Applications

• Provide high reliability high-capacity Point-to-Point links.

• Provide redundancy and high reliability for carrier class operators.

• Optimized for high capacity links operating in license-free bands.

• Additional values:

• Each link can use a different band for maximum protection to the

air interface.

• Affordable SLA can be offered by protecting part of the Netronics

5x100 trunks with NetStream 5x36.

31 MHS Spec

• Supported in Netronics 5x100 by software upgrade to the install base. • TDM service cut-over from the primary to the secondary link is

completely automatic, less than 50 ms.• Automatic restore to primary link as soon as it becomes available.• Supports up to 16 TDM services for Netronics 5x100 and 4 TDM

services for NetStream 5x36. • HSS is used between the links (Install both sites with HSS cables for

additional protection).

• Ethernet services • No Ethernet 1+1• Ethernet traffic is always “on” on both links, while the TDM

service is running only on one link. • Each link carries different Ethernet traffic.• It is possible to aggregate Ethernet capacity with LACP on the

switch

32 Diversity

Antenna diversity• Uses two antennas.• Each antenna experiences a different interference environment.• The system chooses the best received signal providing enhanced

robustness.

DiversityCapacity 25 Mbps

MIMOCapacity 50 Mbps

33 Diversity

Antenna diversity requires antenna separation, possible by two methods:• Polarization Diversity - combines a pair of antennas with orthogonal

polarizations.• Spatial Diversity - employs antennas that are physically separated from

one another.

34 Diversity – Receive Combining

35 Diversity – When to Use

• MIMO• Use MIMO Mode to get the highest capacity, up to 50 Mbps full duplex. • Use MIMO when the air conditions are similar between the antennas.

• Use Diversity instead of MIMO in the following cases:• When the system cannot operate in MIMO Mode due to link conditions. • When you get higher capacity in Diversity Mode than in MIMO Mode.• Note that Diversity Mode requires understanding of the nature of

interference and of the correct solution to deploy. Advise PS.• Remember that the capacity in Diversity is ½ than that of MIMO.

36 Spectrum View

• An RF survey tool • Support link installation before service activation.• Activated by the installer.

• Helps selecting the best channel during installation.• Supports quick and easy installation.

37 Spectrum View – Display Information

• Spectral measurement for each of the 4 receivers that make the link.

• Spectral power measurements in 5MHz channel granularity.• Current, average and maximum power per channel.• Channels free from radars, with radars and barred (for DFS

bands).• Scanned and un-scanned channels.• Channels selected for ACS.• Current operational channel.• Time stamp of the last spectrum scan.• Zoom, selective view of antennas and sites and detail level.

38 Spectrum View – Tool Capabilities

• Save and restore – save the spectral information and also view retrieved spectral information from historical spectrum scans.

• Diagnostics - the Spectrum View information is logged as part of the Diagnostics Information to improve link and system diagnostics and remote support. It can be retrieved from the Netronics Manager menu with Help Get Diagnostic Information.

• Management Integration - Spectrum view information is supported in Netronics MIB and can be used by external Network Management applications.

• Designed for Unlicensed Spectrum – the spectrum measurement algorithms are designed to show accurate information while accommodating with variances in frequency, temperature and interference power and overcoming anomalies that tend to occur in high interference environments.

• Scanning Time – ~10 seconds for an entire band scan. It is recommended to scan for a few minutes for accurate results.

ApplicationsApplications

40 NetStream Applications

IP Backhaul

Cellular Backhaul

Access for Large Corporations/Institutions

High Capacity Private Networks

41

TDM & IP Backhaul

Carrier Class, High capacity backhaul

» Up to 200Mbps per link to meet rise in demand for bandwidth-intensive applications

» Asymmetric link

» QoS & VLANs

WiMAX Backhaul

WiMAXBase Station

42

Making broadband available to all – remote, rural and underserved communities

» nLOS in urban

» Long haul in rural

ISP Backhaul

43

Access Hub

The ultimate high-capacity backhaul solution for any ISP network

» Providing backhaul for any access solution: WiFi, Point-to-Multiple-Point, Multiple-Point-to-Point,

etc.

» Complements Netronics comprehensive offering to ISPs

Access for large Corporations

44

Netronics offers a full Corporate Connectivity Portfolio for organizations of any size

» NetStream 5x06/ 5x10/ 5x25– for small enterprises

» NetStream 5x36/5x50 – for medium-large enterprises

» NetStream 5x200 – large to very large enterprises, up to 16E1/50Mbps per customer!

High Capacity for Private Networks

NetStream – the solution for High-Capacity Private Networks

» Large corporations

» Campuses, health organizations and data-intensive public institutions

45

Video Surveillance backhaul

• Backhaul of traffic from aggregation point of multiple cameras sites• Aggregation of traffic from multiple collocated Megapixel video cameras • High capacity transmission with crystalline image quality

46

Thank you

www.netronics-networks.comwww.netronics-networks.com