motor e-2100
TRANSCRIPT
-
7/31/2019 MOTOR E-2100
1/2
14
Dimensions
14 4/01 Globe Motors
ROTATION (VIEWED FROM SHAFT END)
CCW - POSITIVE VOLTAGE TO (RED), NEGATIVE VOLTAGE TO (BLACK)
CW - REVERSE POLARITY
NOTE: Consult factory prior to preparing spec control prints. Dimensions are for reference only
power rat ing: .005 (3.7 W) short stack.009 (6.7 W) long stack
voltage: 12 or 24 VDC
weight: 4.4 ounces (short stack) 5.5 ounces (long stack)
inertia: See table, opposite pageelectrical time constant: 1.0 millisecond max
mechanical time constant: 30.0 milliseconds max
typical no load torque: 0.5 oz. in.
shaft: Precision-ground and hardened stainless steel.Options: lengths, flats, diameters, pinions, gears. Shaft
material may change depending upon options selected
magnets: Ceramic. These tolerate high-pulse currents withoutdemagnetizing
bearings:
Ball: Pre-loaded to withstand high side load and low end play
Sleeve: Self-aligning sleeve bearings are life-lubricated and
withstand a 2-lb. side load and have .002" to .027" axial end
play
cables/leads: 8" min. #22 AWG 2 leads UL style 1180.Terminals optional
cover: Steel housing, zinc plate
end bells: Die-cast zinc
w inding temperature rise: **See table, opposite page
w inding insulation rating: 180C
options available: Gear train (see Bulletins E2130 and E2135)
EMI suppression
Terminals
E-2100IM-13 MOTORSDC Ceramic Permanent Magnet Motors
8"MI N
#22 AWG, 2 LEADSUL STYLE 1180
RED & BLACK
.500DIAMAX REF
SHORT STACK 1.897 M AXLONG STACK 2.207 MA X
.252.064MA X REF
1 3/16DIA
.050 MAX SHAFTEXTENSION
.1565
.1560DIA
SHAFT
.002.475DIA
A
.015.500
.062
WITHEND PLAYREMOVED
1 1/4DIA
#6-32 UNC-2B.247 MIN DEEP2 PLACES
A.010 M M
.500
1.000
WITH
END PLAYREMOVED
.110 TYP
.047 DIATYP
( + ) TERMI NAL
.020 TYP
.268
.050
.906MA X
Terminal Configuration
-
7/31/2019 MOTOR E-2100
2/2
15 4/01 Globe Motors
12 5,200 .200 1.50 .80 1.4 15 2.90 7.30 405A6108-2
24 5,200 .125 1.50 .40 1.4 15 5.60 30.00 405A6108-3
12 5,200 .185 2.50 1.30 2.1 11 2.90 4.00 405A6109-2
24 5,200 .125 2.50 .65 2.1 11 5.85 15.00 405A6109-3
Part Nos.: 405A6103, 6109
SPEED CURRENT 10% CURRENT AT RATED TEMP.** TORQUE
NO NO LOAD RATED TORQUE INERTIA RISE CONSTANTVOLTAGE LOAD (max TORQUE (max (oz. in. (C/ (oz. in./ RESISTANCE
(VDC) (rpm) amps) (oz. in.) amps) sec2 x 10-4) watt) amp) (ohms) WITH LEADS
12 5,200 .200 1.50 .80 1.4 15 2.90 7.30 405A6102-2
24 5,200 .125 1.50 .40 1.4 15 5.60 30.00 405A6102-3
12 5,200 .185 2.50 1.30 2.1 11 2.90 4.00 405A6103-2
24 5,200 .125 2.50 .65 2.1 11 5.85 15.00 405A6103-3
STANDARDPART
NUMBER*
E-2100
Typical Motor Performance
Part Nos.: 405A6102, 6108
* When You OrderUnits shown above are standard and may be ordered by part number. Remember to include armature winding dash number,EXAMPLE: 405A6102-2
Short Sta ck Sleeve Bea rings
Standard Part Numbers and Data
Long Stack Sleeve Bearings
Short Stack Ball Bearings
Long Stack Ball Bearings
**Winding temperature rise measured when mounted to 8.00" x 8.00" x .25" aluminum plate. Multiply by 1.4 when mounted to a heat insulator
amps
rpm
6 6,000
5 5,000
4 4,000
3 3,000
2 2,000
1 1,000
0 1 2 3 4 5 6
TORQUE (oz. in.)
6 6,000
5 5,000
4 4,000
3 3,000
2 2,000
1 1,000
0 1 2 3 4 5 6 7 8 9
TORQUE (oz. in.)
RPM RPM
AMPS -3
AMPS -2
-3
-2
-3
-2
AMPS -2
AMPS -3
amps
rpm