mn products for spemn products for spe
TRANSCRIPT
MN
MN products for SPEMN products for SPE
Standard phases for solid phase extraction
201
C6H11 ec cyclohexyl silica, endcapped
base material silica, pore size 60 Å, particle size 45 µm,specific surface 500 m2/g, pH stability 2 – 8cyclohexyl phase, endcapped, carbon content 9 %
– alternative phase for the mid-polar range
recommended application: phenols from waterchloroanilines from waste wateranthelmintics from tissue
Application: comparison of different phases for phenol analysis
Compounds investigated: Phenol, 2,4-dinitrophenol, pen-tachlorophenol
Column types: CHROMABOND® C18 ec, 6 ml, 2000mg, Cat. No.730141CHROMABOND® C18, 6 ml, 2000 mg, Cat. No.730130CHROMABOND® C6H11 ec, 6 ml, 2000 mg, Cat. No.730469CHROMABOND® C18 HYDRA, 6 ml, 2000 mg, Cat. No.730301
Column conditioning: 10 ml acetone, 10 ml methanol, and 10 ml dist. water (pH 2)Sample application: aspirate the sample through the col-umn.Elution: 10 ml methanol
Ordering information
0
20
40
60
80
100
phenol 2,4-dinitrophenol pentachlorophenol
CHROMABOND®
C18 ec C18 C6H11 ec C18 Hydra
Volume Adsorbent weight Pack of
CHROMABOND® C6H11 ec polypropylene columns500 mg 1000 mg
3 ml 730442 506 ml 730443 730444 30
CHROMABOND® C6H11 ec glass columns500 mg 1000 mg
3 ml 730442 G 506 ml 730443 G 730444 G 30
CHROMABOND® LV-C6H11 ec
100 mg 200 mg 500 mg
15 ml 732440 732441 732443 30
CHROMABOND® MULTI 96 C6H11 ec
96 x 25 mg 96 x 50 mg 96 x 100 mg
738440.025M 738440.050M 738440.100M 1
CHROMABOND® C6H11 ec adsorbent
730631 100 g
Other column sizes and sorbent weights on request · Take advantage of our SPE service on page 232
3021
50
Australia & New Zealand: Winlab Pty Ltd www.winlab.com.au email: [email protected] or call +61 (0)7 3205 1209
MN
MN products for SPEMN products for SPE
Standard phases for solid phase extraction
202
C6H5 phenyl silica
base material silica, pore size 60 Å, particle size 45 µm,specific surface 500 m2/g, pH stability 2 – 8phenyl phase, carbon content 8 %
– polarity similar to C8– in addition to hydrophobic interactions more selective
adsorption is possible by π-π interactions due to theelectron density of the phenyl ring
recommended application: aflatoxinscaffeinephenols
Ordering information
NO2 nitrophenyl silica
base material silica, pore size 60 Å, particle size 45 µm,specific surface 500 m2/g, pH stability 2 – 8nitrophenyl phase, carbon content 5.5 %
recommended application: aromatics
Ordering information
Volume Adsorbent weight Pack of
CHROMABOND® C6H5 polypropylene columns100 mg 200 mg 500 mg
1 ml 730083 1003 ml 730411 730084 50
CHROMABOND® C6H5 glass columns100 mg 500 mg
1 ml 730083 G 1003 ml 730084 G 50
CHROMAFIX® C6H5 cartridges0.4 ml / 200 mg 0.8 ml / 400 mg 1.8 ml / 900 mg
731810 731811 731812 50
CHROMABOND® MULTI 96 C6H5
96 x 25 mg 96 x 50 mg 96 x 100 mg
738025.025M 738025.050M 738025.100M 1
CHROMABOND® C6H5 adsorbent730606 100 g
Volume Adsorbent weight Pack of
CHROMABOND® NO2 polypropylene columns500 mg 1000 mg
3 ml 730143 506 ml 730142 30
CHROMABOND® NO2 glass columns500 mg
3 ml 730143 G 50
CHROMAFIX® NO2 cartridges
0.8 ml / 400 mg
731826 50
On request, CHROMABOND® columns are also available in special versions for lab and flash robots
Australia & New Zealand: Winlab Pty Ltd www.winlab.com.au email: [email protected] or call +61 (0)7 3205 1209
MN
MN products for SPEMN products for SPE
Standard phases for solid phase extraction
203
NH2 aminopropyl silica
base material silica, pore size 60 Å, particle size 45 µm,specific surface 500 m2/g, pH stability 2 – 8aminopropyl phase, carbon content 3.5 %
– polar, weak anion exchangerrecommended application: trace elementslipids
DMA dimethylaminopropyl silicabase material silica, pore size 60 Å, particle size 45 µm,specific surface 500 m2/g, pH stability 2 – 8dimethylaminopropyl phase, carbon content 3.5 %
– polar, weak anion exchangerrecommended application: similar to NH2 – slightly weaker anion exchanger
Ordering information
Volume Adsorbent weight Pack of
CHROMABOND® NH2 polypropylene columns100 mg 200 mg 500 mg 1000 mg
1 ml 730031 1003 ml 730413 730033 506 ml 730180 730626 30
CHROMABOND® NH2 glass columns100 mg 500 mg 1000 mg
1 ml 730031 G 1003 ml 730033 G 506 ml 730180 G 730626 G 30
CHROMABOND® LV-NH2
100 mg 500 mg
15 ml 732031 732033 30
CHROMAFIX® NH2 cartridges0.4 ml / 200 mg 0.8 ml / 400 mg 1.8 ml / 900 mg
731813 731814 731815 50
CHROMABOND® MULTI 96 NH2
96 x 25 mg 96 x 50 mg 96 x 100 mg
738031.025M 738031.050M 738031.100M 1
CHROMABOND® NH2 adsorbent730603 100 g
CHROMABOND® DMA polypropylene columns100 mg 500 mg
1 ml 730041 1003 ml 730043 50
CHROMABOND® DMA glass columns100 mg 500 mg
1 ml 730041 G 1003 ml 730043 G 50
Other column sizes and sorbent weights on request · Take advantage of our SPE service on page 232
Australia & New Zealand: Winlab Pty Ltd www.winlab.com.au email: [email protected] or call +61 (0)7 3205 1209
MN
MN products for SPEMN products for SPE
Standard phases for solid phase extraction
204
CN cyanopropyl silica
base material silica, pore size 60 Å, particle size 45 µm,specific surface 500 m2/g, pH stability 2 – 8cyanopropyl phase, carbon content 5.5 %
– polar to mid-polar– in addition to weak hydrophobic interactions selective in-
teractions are possible due to the high electron densityof the CN group
recommended application: cyclosporinscarbohydrates
Ordering information
Volume Adsorbent weight Pack of
CHROMABOND® CN polypropylene columns100 mg 200 mg 500 mg
1 ml 730061 1003 ml 730420 730063 506 ml 730421 30
CHROMABOND® CN glass columns100 mg 500 mg
1 ml 730061 G 1003 ml 730063 G 506 ml 730421 G 30
CHROMABOND® LV-CN
200 mg
15 ml 732062 30
CHROMAFIX® CN cartridges
0.4 ml / 200 mg 0.8 ml / 400 mg 1.8 ml / 900 mg
731822 731823 731824 50
CHROMABOND® MULTI 96 CN
96 x 25 mg 96 x 50 mg 96 x 100 mg
738061.025M 738061.050M 738061.100M 1
CHROMABOND® CN adsorbent
730607 100 g
On request, CHROMABOND® columns are also available in special versions for lab and flash robots
Australia & New Zealand: Winlab Pty Ltd www.winlab.com.au email: [email protected] or call +61 (0)7 3205 1209
MN
MN products for SPEMN products for SPE
Standard phases for solid phase extraction
205
OH diol silica
base material silica, pore size 60 Å, particle size 45 µm,specific surface 500 m2/g, pH stability 2 – 8diol phase, carbon content 5.5 %
– polar – properties similar to SiOH
recommended application: antibioticsprostaglandins
Ordering information
Volume Adsorbent weight Pack of
CHROMABOND® OH polypropylene columns100 mg 200 mg 500 mg
1 ml 730051 1003 ml 730417 730053 506 ml 730418 30
CHROMABOND® OH glass columns100 mg 500 mg
3 ml 730053 G 50
CHROMABOND® LV-OH
100 mg 500 mg
15 ml 732051 732053 30
CHROMAFIX® OH cartridges
0.4 ml / 200 mg 0.8 ml / 400 mg 1.8 ml / 900 mg
731819 731820 731821 50
CHROMABOND® MULTI 96 OH
96 x 25 mg 96 x 50 mg 96 x 100 mg
738051.025M 738051.050M 738051.100M 1
CHROMABOND® OH adsorbent
730605 100 g
Other column sizes and sorbent weights on request · Take advantage of our SPE service on page 232
Australia & New Zealand: Winlab Pty Ltd www.winlab.com.au email: [email protected] or call +61 (0)7 3205 1209
MN
MN products for SPEMN products for SPE
Standard phases for solid phase extraction
206
SiOH unmodified silica
unmodified, weakly acidic silica, pore size 60 Å, particlesize 45 µm, specific surface 500 m2/g, pH stability 2 – 8
– very polar – adsorbs humidity from air, for this reason it should be
kept well closed and if necessary dried before use– due to its high affinity for polar compounds it should not
be conditioned with polar (e. g. methanol) or water-con-taining solvents
recommended application: aflatoxinschloramphenicolpesticidessteroidsvitamins
Ordering information
Volume Adsorbent weight Pack of
CHROMABOND® SiOH polypropylene columns100 mg 200 mg 500 mg 1000 mg 2000 mg 5 g 10 g 50 g
1 ml 730071 1003 ml 730214 730073 506 ml 730070 730075 730107 30
15 ml 730217 2045 ml 730406 2070 ml 730072 10
150 ml 730473 10
CHROMABOND® SiOH glass columns100 mg 200 mg 500 mg 1000 mg 2000 mg
1 ml 730071 G 1003 ml 730214 G 730073 G 506 ml 730070 G 730075 G 730107 G 30
CHROMABOND® LV-SiOH
100 mg 200 mg 500 mg
15 ml 732071 732072 732073 30
CHROMAFIX® SiOH cartridges
0.4 ml / 200 mg 0.8 ml / 400 mg 1.8 ml / 900 mg
731828 731829 731830 50
CHROMABOND® MULTI 96 SiOH
96 x 25 mg 96 x 50 mg 96 x 100 mg
738071.025M 738071.050M 738071.100M 1
CHROMABOND® SiOH adsorbent
730608 100 g
On request, CHROMABOND® columns are also available in special versions for lab and flash robots
Australia & New Zealand: Winlab Pty Ltd www.winlab.com.au email: [email protected] or call +61 (0)7 3205 1209
MN
MN products for SPEMN products for SPE
Standard phases for solid phase extraction
207
PCA propylcarboxylic acid cation exchanger based on silica
base material silica, pore size 60 Å, particle size 45 µm,specific surface 500 m2/g, pH stability 2 – 8propylcarboxylic acid modified silica
– weakly acidic cation exchanger
recommended application: strong cations
Application: enrichment of heterocyclic compounds with cation exchangers
Compounds investigated: Desisopropylatrazine, desethyl-atrazine, atrazine, prometryn, chlorpromazine
Column types: CHROMABOND® SA, 6 ml, 500 mg, Cat. No. 730425CHROMABOND® PSA, 6 ml, 500 mg, Cat. No. 730463CHROMABOND® PCA, 6 ml, 500 mg, Cat. No. 730483CHROMAFIX® 400-PS-H+, 0.8 ml, 400 mg, Cat. No. 731861
Sample pretreatment: 200 µg desisopropylatrazine, 100 µgdesethylatrazine, 100 µg atrazine, 100 µg prometryn, and200 µg chlorpromazine are dissolved in 10 ml methanol,the solution is given in 200 ml dist. water.Column conditioning: 2 column volumes methanol, 2 col-umn volumes acetic acid (1%)Sample application: Aspirate the sample with about 700mbar through the column.Elution: 10 ml acetonitrile / 0.1 M K2HPO4 (1:1)
Subsequent analysis: HPLCColumn: CC 250/4 NUCLEOSIL® 100-5 C18
Cat. No. 721 622.40Eluent: A) water, B) methanolGradient: 3 min 40 % B, in 1 min to 60 % B, in 3 min to
90 % B, in 4 min to 100 % BFlow rate: 1 ml/minDetection: UV, 280 nmRecovery rates:
Ordering information
CHROMABOND® CHROMAFIX® PS-H+SA PSA PCA
Desisopropyl-atrazine
51 % 54 % 3 % 49 %
Desethylatrazine 64 % 67 % 3 % 54 %Atrazine 94 % 98 % 8 % 62 %Prometryn 96 % 97 % 10 % 41 %Chlorpromazine 71 % 99 % 15 % 35 %
Volume Adsorbent weight Pack of
CHROMABOND® PCA polypropylene columns500 mg 1000 mg
3 ml 730482 506 ml 730483 730484 30
CHROMABOND® PCA glass columns500 mg
3 ml 730482 G 50
CHROMABOND® LV-PCA
100 mg 200 mg 500 mg
15 ml 732480 732481 732482 30
CHROMABOND® MULTI 96 PCA
96 x 25 mg 96 x 50 mg 96 x 100 mg
738480.025M 738480.050M 738480.100M 1
CHROMABOND® PCA adsorbent
730629 100 g
Other column sizes and sorbent weights on request · Take advantage of our SPE service on page 232
3021
30
Australia & New Zealand: Winlab Pty Ltd www.winlab.com.au email: [email protected] or call +61 (0)7 3205 1209
MN
MN products for SPEMN products for SPE
Standard phases for solid phase extraction
208
SA benzenesulphonic acid cation exchanger based on silica
base material silica, pore size 60 Å, particle size 45 µm,specific surface 500 m2/g, pH stability 2 – 8benzenesulphonic acid modified silica
– strongly acidic cation exchangercapacity ~ 0.9 meq/g
– adsorbent with hydrophobic and π-π interactions (ben-zene ring)
– ion exchange of organic compounds from aqueous ma-trix
– elution of interesting compounds with solvent systems,which compensate the ionic and nonpolar interactions,e. g. methanolic HCl
recommended application: amino acidschlorophyllPCBs
Ordering information
Volume Adsorbent weight Pack of
CHROMABOND® SA polypropylene columns100 mg 200 mg 500 mg 1000 mg
1 ml 730076 1003 ml 730275 730077 506 ml 730212 30
CHROMABOND® SA glass columns100 mg 200 mg 500 mg
1 ml 730076 G 1003 ml 730275 G 730077 G 50
CHROMABOND® LV-SA
100 mg 500 mg
15 ml 732081 732083 30
CHROMAFIX® SA cartridges
0.4 ml / 200 mg 0.8 ml / 400 mg 1.8 ml / 900 mg
731831 731832 731833 50
CHROMABOND® MULTI 96 SA
96 x 25 mg 96 x 50 mg 96 x 100 mg
738141.025M 738141.050M 738141.100M 1
CHROMABOND® SA adsorbent
730609 100 g
On request, CHROMABOND® columns are also available in special versions for lab and flash robots
Australia & New Zealand: Winlab Pty Ltd www.winlab.com.au email: [email protected] or call +61 (0)7 3205 1209
MN
MN products for SPEMN products for SPE
Standard phases for solid phase extraction
209
PSA propylsulphonic acid cation exchanger based on silica
base material silica, pore size 60 Å, particle size 45 µm,specific surface 500 m2/g, pH stability 2 – 8propylsulphonic acid modified silica
– very strong cation exchanger – contrary to the SA phase no π-π interactions
recommended application: weak cations
Please note application 302130 ”Enrichment of heterocycliccompounds with cation exchangers“ on page 207.
Ordering information
Volume Adsorbent weight Pack of
CHROMABOND® PSA polypropylene columns100 mg 500 mg 1000 mg
1 ml 730460 1003 ml 730462 506 ml 730464 30
CHROMABOND® PSA glass columns100 mg 500 mg 1000 mg
1 ml 730460 G 1003 ml 730462 G 506 ml 730464 G 30
CHROMABOND® LV-PSA
100 mg 200 mg 500 mg
15 ml 732460 732461 732462 30
CHROMAFIX® PSA cartridges
0.4 ml / 200 mg 0.8 ml / 400 mg 1.8 ml / 900 mg
731710 731711 731712 50
CHROMABOND® MULTI 96 PSA
96 x 25 mg 96 x 50 mg 96 x 100 mg
738460.025M 738460.050M 738460.100M 1
CHROMABOND® PSA adsorbent
730630 100 g
Other column sizes and sorbent weights on request · Take advantage of our SPE service on page 232
Australia & New Zealand: Winlab Pty Ltd www.winlab.com.au email: [email protected] or call +61 (0)7 3205 1209
MN
MN products for SPEMN products for SPE
Standard phases for solid phase extraction
210
SB quaternary ammonium anion exchanger based on silica
base material silica, pore size 60 Å, particle size 45 µm,specific surface 500 m2/g, pH stability 2 – 8silica modified with quaternary amine
– strongly basic anion exchangercapacity ~ 0.6 meq/g
– not suited for very strong anions such as sulphonic ac-ids, because these are difficult to elute
recommended application: organic acidscaffeinesaccharin
Ordering information
Volume Adsorbent weight Pack of
CHROMABOND® SB polypropylene columns100 mg 200 mg 500 mg 1000 mg
1 ml 730078 1003 ml 730322 730079 506 ml 730426 730323 30
CHROMABOND® SB glass columns100 mg 200 mg 500 mg 1000 mg
1 ml 730078 G 1003 ml 730322 G 730079 G 506 ml 730426 G 30
CHROMABOND® LV-SB
100 mg 200 mg 500 mg
15 ml 732086 732087 732088 30
CHROMAFIX® SB cartridges
0.4 ml / 200 mg 0.8 ml / 400 mg 1.8 ml / 900 mg
731834 731835 731836 50
CHROMABOND® MULTI 96 SB
96 x 25 mg 96 x 50 mg 96 x 100 mg
738101.025M 738101.050M 738101.100M 1
CHROMABOND® SB adsorbent
730610 100 g
Other column sizes and sorbent weights on request · Take advantage of our SPE service on page 232
Australia & New Zealand: Winlab Pty Ltd www.winlab.com.au email: [email protected] or call +61 (0)7 3205 1209
MN
MN products for SPEMN products for SPE
Standard phases for solid phase extraction
211
PS-RP / PS-OH– / PS-H+ / PS-Ag+ / PS-Ba2+ phases for ion chromatography
base material: high purity polystyrene-divinylbenzenecopolymers (PS/DVB), pore size 100 Å, particle size100 µm
– very low degree of swelling, thus very well suited forchromatography
– reliable function over the whole pH range from 0 to 14different modifications for different applications fromelimination of nonpolar compounds up to the removal ofspecific polar components
recommended applications: – removal of interfering compounds
→ improves chromatographic separation, if the interfer-ing components overlap with the analyte in the chroma-togram (see below)→ improves lifetime of the chromatographic column,since interfering components can irreversibly block thecolumn packing
– enrichment of the analytes
Properties of the individual modifications:
Ordering information
PS-RP hydrophobic PS/DVB copolymer removal of organic interfering components from waterPS-OH– strong PS/DVB anion exchanger, OH– form removal or concentration of anions from water
increasing the pH value in acidic samplesPS-H+ strong PS/DVB cation exchanger, H+ form removal or concentration of cations from water
decreasing the pH value of basic samplesPS-Ag+ strong PS/DVB cation exchanger, Ag+ form removal of halide ions from waterPS-Ba2+ strong PS/DVB cation exchanger, Ba2+ form removal of sulphate ions from water
Volume Adsorbent weight Pack of
CHROMAFIX® PS cartridges0.4 ml / 200 mg 0.8 ml / 400 mg
PS-RP 731877 731875 50PS-OH– 731868 731860 50PS-H+ 731867 731861 50PS-Ag+ 731866 731865 50PS-Ba2+ 731871 731870 50
0 5min 0 5min 0 5min
1
22
1 2
original sample fraction 2 control Application: removal of halides from aqueous samples shown for the trace analysis of nitrate besides an excess of bromide
Original sample: 20 ppm nitrate besides 500 ppm bromideControl: 20 ppm nitrate besides 5 ppm bromideSample preparation: SPE
Column type: CHROMAFIX® 400-PS-Ag+
0.8 ml / 400 mg, Cat. No. 731865Column conditioning: 1 ml dist. waterSample application and elution: apply 4 x 1 ml sample frac-tions to the cartridge, discard 1st ml, collect 2nd, 3rd and 4thml separatelyChromatograms of fractions 3 and 4 correspond to that offraction 2.Analysis: HPLC
Column: CC 250/4 NUCLEOSIL® Anion II,Cat. No. 721451.40
Eluent: 2 mM potassium hydrogen phthalate pH 6Flow rate: 2 ml/minDetection: indirect UV, 280 nmPeaks: 1. bromide, 2. nitrate30
2750
Australia & New Zealand: Winlab Pty Ltd www.winlab.com.au email: [email protected] or call +61 (0)7 3205 1209
MN
MN products for SPEMN products for SPE
Standard phases for solid phase extraction
212
Alox A / Alox N / Alox B Aluminum oxide, acidic, neutral, basic
Aluminium oxide, high purity, pore volume 0.90 ml/g,particle size 60 – 150 µm, specific surface 150 m2/gAlox A: aluminium oxide, acidic, pH value 4 ± 0.3Alox N: aluminium oxide, neutral, pH value 7 ± 0.5Alox B: aluminium oxide, basic, pH value 9.5 ± 0.3
recommended application: together with phase SA for PCBs and pesticides
Ordering information
Phase Volume Adsorbent weight Pack of
CHROMABOND® Alox polypropylene columns100 mg 500 mg 1000 mg 4000 mg
Alox A 3 ml 730452 50Alox A 6 ml 730453 730017 30Alox A 45 ml 730455 20Alox N 3 ml 730446 50Alox N 6 ml 730447 730139 30Alox N 45 ml 730250 20Alox B 1 ml 730427 100Alox B 3 ml 730429 50Alox B 6 ml 730466 730020 30Alox B 45 ml 730467 20CHROMABOND® Alox glass columns
100 mg 500 mg 1000 mgAlox A 3 ml 730452 G 50Alox A 6 ml 730453 G 30Alox N 3 ml 730446 G 50Alox N 6 ml 730447 G 730139 G 30Alox B 1 ml 730427 G 100Alox B 3 ml 730429 G 50Alox B 6 ml 730466 G 730020 G 30CHROMABOND® LV-Alox
1000 mgAlox A 15 ml 732210 30Alox N 15 ml 732091 30Alox B 15 ml 732205 30
CHROMAFIX® Alox cartridges0.4 ml / 300 mg 0.8 ml / 700 mg 1.8 ml / 1700 mg
Alox A 731766 731767 50Alox N 731843 731844 731845 50Alox B 731761 731762 50CHROMABOND® MULTI 96 Alox
96 x 100 mgAlox A 738253.100M 1Alox N 738251.100M 1Alox B 738252.100M 1
CHROMABOND® Alox adsorbentsAlox A 730642 100 gAlox N 730641 100 gAlox B 730640 100 g
On request, CHROMABOND® columns are also available in special versions for lab and flash robots
Australia & New Zealand: Winlab Pty Ltd www.winlab.com.au email: [email protected] or call +61 (0)7 3205 1209
MN
MN products for SPEMN products for SPE
Standard phases for solid phase extraction
213
Florisil® magnesium silicate
Matrix magnesium silicate (MgO-SiOH 15:85), high pu-rity, particle size 150 – 250 µm
– Florisil® is a product and registered trademark of FloridinCompany, USA.
recommended application: organic tin compoundsaliphatic carboxylic acidsPCBs, PAHs
Ordering information
Volume Adsorbent weight Pack of
CHROMABOND® Florisil® polypropylene columns100 mg 200 mg 500 mg 1000 mg
1 ml 730089 1003 ml 730457 730081 506 ml 730238 730082 30
CHROMABOND® Florisil® glass columns100 mg 200 mg 500 mg 1000 mg
3 ml 730457 G 730081 G 506 ml 730082 G 30
CHROMABOND® LV-Florisil®
100 mg 200 mg 500 mg
15 ml 732200 732201 732094 30
CHROMAFIX® Florisil® cartridges
0.4 ml / 200 mg 0.8 ml / 400 mg 1.8 ml / 900 mg
731846 731847 731848 50
CHROMABOND® MULTI 96 Florisil®
96 x 25 mg 96 x 50 mg 96 x 100 mg
738081.025M 738081.050M 738081.100M 1
CHROMABOND® Florisil® adsorbent
730622 100 g
Other column sizes and sorbent weights on request · Take advantage of our SPE service on page 232
Australia & New Zealand: Winlab Pty Ltd www.winlab.com.au email: [email protected] or call +61 (0)7 3205 1209
MN
MN products for SPEMN products for SPE
Standard phases for solid phase extraction
214
PA polyamide 6
matrix polyamide 6, unmodified, high purity, particle size40 – 80 µm
recommended application: flavonoids, PAHs
Ordering information
Volume Adsorbent weight Pack of
CHROMABOND® PA polypropylene columns100 mg 200 mg 500 mg 1000 mg
1 ml 730383 1003 ml 730384 730126 506 ml 730007 730127 30
CHROMABOND® PA glass columns100 mg 200 mg 500 mg 1000 mg
1 ml 730383 G 1003 ml 730384 G 730126 G 506 ml 730007 G 730127 G 30
CHROMABOND® LV-PA
100 mg 500 mg
15 ml 732009 732097 30
CHROMAFIX® PA cartridges
0.4 ml / 125 mg 0.8 ml / 250 mg 1.8 ml / 600 mg
731849 731850 731851 50
CHROMABOND® MULTI 96 PA
96 x 25 mg 96 x 50 mg 96 x 100 mg
738121.025M 738121.050M 738121.100M 1
CHROMABOND® PA adsorbent
730660 100 g
Other column sizes and sorbent weights on request · Take advantage of our SPE service on page 232
Australia & New Zealand: Winlab Pty Ltd www.winlab.com.au email: [email protected] or call +61 (0)7 3205 1209