Tel: 246.427.1133

Fax: 246.427.1131 Products About Us

Contact Us

Sensor Introductory

 

• Reduces energy costs by up to 80%

• Universally compatible with all A/C units

• Mains powered (110-230 V)

• Easy installation

• Built in comfort night sensor

• Tamper proof infra red connectivity

• Tamper proof lockable key pad

 

Our Occupancy Sensors are stand-alone units that can interface with most split systems. They are Dual Sensors, using both Motion and Passive Infrared detection to sense when a space is occupied.

 

Ecosense 4000 is universally compatible with any A/C that can be operated by remote controller. Unlike the 2000 version, Ecosense 4000 is mains powered.

 

This model can be fitted directly adjacent to your A/C unit therefore no connecting cables will be visible. Ecosense uses Passive Infra Red (PIR) technology to scan the room for occupancy. PIR will only detect body heat and will not therefore be affected by items such as ceiling fans, curtains etc. When no movement has been detected it will send a signal to the A/C unit to switch it off. There is a red LED light that flashes to indicate detection of movement.

 

Function controls & settings

 

TIMER

After the occupant has left the room, Ecosense will continue to scan the room for a pre –set time – 15,30 or 45 mins before sending the signal to turn off the A/C.

 

LEARN/TEST

Once Ecosense has copied the infra red (IR) signal from the A/C remote controller, by pressing the ‘test’ button, you can test the unit to ensure the IR signal has been copied correctly.

 

NIGHT SETTING

Should you not require Ecosense to control your A/C during the hours of darkness there are 2 night setting options.

 

Comfort Plus - allows the A/C to continue operating for one hour after darkness has been detected, after which time Ecosense 4000 will switch off the A/C.

Night Setting - Ecosense 4000 will go to sleep and not interfere with the operation of the A/C during the hours of darkness.

 

CLEAR MEMORY

If at any time you wish to clear settings, there is a clear memory function to allow the unit to revert to factory default.

 

They are Wide View Sensors that can be wall mounted in any room configuration. They detect small motion up to 40 feet and larger motion up to 70 feet. In addition to Passive Infrared detection, they utilize motion technology requiring both motion and temperature to indicate occupancy, so a blowing curtain won’t turn the AC on.

 

Continual viewing with Time Delay means the Sensor is continually looking for occupancy. Every time occupancy is seen the time delay circuit is re-activated. This eliminates the need for door switches or other components and maximizes Energy Efficiency without any Guest complaints.

 

Applications are varied, as our Sensors can be used with thermostats, PTAC systems, Lighting …truly anywhere that you would desire to reduce energy consumption while spaces are vacant.

 

For further information please feel free to contact our office.

Ecosense 4000 SECOND GENERATION Occupancy Sensors