mini-p-pp-a-gh-fc · 2018. 10. 16. · mini-p-pp-a-gh-fc mini high bay primary sensor for use with...
TRANSCRIPT
www.begcontrols.com
ControlsB.E.G.
Project name: Type
Catalog number:
Location:
Date:
Comments:
MINI-P-PP-A-GH-FC
Product Code Description Color Part Number
MINI-P-PP-A-GH-FC MINI high bay primary Sensor for use with PP-A-J and PP-1-J power packs white 97184
Accessories
IR-Adapter for Smartphones IR-Adapter for Smartphones (phone by others) to enable use of Smartphone Remote Control App black 92726
MINI-S-PP-GH-FC MINI high bay secondary sensor for use with any PP power pack (requires primary sensor on same power pack) white 97187
‚Size comparison‘
TOP FEATURES
■ Ideal for high-bay applications
■ The smallest, full feature, ceiling mount sensor on the market
■ Spring clips for quick and easy installation in suspended ceilings and light fixtures
■ All settings can be remotely adjusted using our password protected, Android or iOS smartphone apps.
■ Trim rings are removable for field painting! Accessory rings are offered in several popular colors and in two different sizes
■ Can be used as both an occupancy and vacancy sensor
■ Photocell included as standard feature
DESCRIPTION
Small size, big results! At less than 2‘ in diameter, the MINI out performs other 360°, ceiling mounted sensors that are over 5 times its size! And the MINI virtually disappears after it is mounted!Superior passive infrared (PIR) motion detection, an integrated photocell as a standard feature and a small easy-to-mount profile makes the MINI perfect for almost any application.Designed for easy integration with the B.E.G. PP-1-J or PP-A-J power packs, the MINI simply connects to the power pack with a standard RJ12 jack. When used with B.E.G. power packs, the MINI can switch a full 20amp load, send a dry contact signal to HVAC or other systems and be overridden with an off the shelf switch.All of the settings of the MINI can be remotely adjusted using our iOS or Android smartphone app. Through programming when combined with a switch the MINI can be used as a Vacancy sensor.
OPERATION
The MINI with B.E.G. PP-A power pack detects both motion and the ambient light level in the room and then automates the lights according to the parameters set by the building management. The integrated light sensor constantly measures the ambient light and if the light level is sufficient, the light will be switched off. If the ambient light level is below the brightness level the lights will be allowed to come on when the sensor detects movement in the room. When motion is detected in the room, the PP-A‘s axillary dry contact relay will send a signal to HVAC or other systems indicating that the room is occupied. With the integration of simple off the shelf, momentary switches the MINI/PP-A can be used as a vacancy senor or the switches can be used to turn off the lighting before the preset time out period.
ORDERING INFORMATION
www.begcontrols.com
■ Indoor applications: Warehouses Gymnasiums Multipurpose rooms School/University auditoriums and lecture halls Shopping mall atriums Open ceiling retail stores Hotel ballrooms and meeting rooms
■ Vacancy (Manual) operation is achieved by combining the PP-A power pack with a low voltage momentary contact switch. For low mounting applications please refer to MINI-P-PP-A-FC, part number 97180. For outdoor and wet location applications please refer to MINI-P-PP-A-GH-W-FC, part number 97194.
APPLICATIONS
PRODUCT INFORMATION
■ Mini motion sensor and photocell designed for high-bay applications
■ Works with the B.E.G. PP-1-J or PP-A-J or proprietary low voltage system
■ Designed for indoor and dry locations only.
■ Up to 4 Secondary sensors may be connected with a primary sensor to increase motion detection coverage.
■ Spring clips for quick and easy installation in suspended ceilings and light fixtures
■ 5 years limited warranty
■ Masking blinds included
■ All programmable features can be adjusted using our free Android and iOS apps.
■ ROHS and REACH compliant
■ Photocell included as a standard feature
■ Trim rings are removable for field painting. Use paints suitable for polyethylene plastic. Accessory rings are offered in several popular colors and in two different sizes. Please see accessory ordering information for options.
Power supply: 24 V DC from B.E.G. Controls‘ Power Pack PP-1-J or PP-A-J, or compatible power supply by others. Please contact B.E.G. Controls to confirm compatibility with power supplies by others.
Power consumption: < 0.5 W
Detection range: max. Ø 20 ft / 6 m
Recommended Mounting Height: 32.75 ft / 10 m
Dimensions sensor: Ø 1.4 x 1.54 in / 36 x 40 mm
Operating tempe-rature: -13 °F to 122 °F / -25 °C to +50 °C
Housing: UV- and shock resistant 5VA material
Cable length: 9.8 ft / 300 cm
Remote controllable: IR-Adapter with Smartphone App (Android / iOS)
Compliances: ETL listed for the U.S. and Canada (UL STD 60730-1 and CSA STD E60730-1). UL 2043 plenum rated.
Channel 1Daylight Modes:
Full Automatic, Impulse & CdS
Time settings: 1 s - 30 min / 12 h
Brightness value: 1 - 223 fc / 10 - 2400 Lux
Channel 2Motion Detection Modes:
Full Automatic, Impulse
Time settings: 1 s - 30 min / 12 h
TECHNICAL DETAILS
PARAMETER SETTINGS
Open device
Lock device / Save settings
Double lock device
Reset
Activate / deactivate status LED
Test mode
Sensitivity
Light ON / OFF
Automatic
Follow-up Time
Switch-on threshold
Save Brightness
Switch-on delay
www.begcontrols.com
ControlsB.E.G.
Note: Product specifications are subject to change without notice. Please consult the B.E.G. Controls web site for the most recent product specifications.
RANGE DIAGRAM
20ft / 6m
30 ft / 9m
1
Walking across1
1 Walking across
WIRING DIAGRAM
Hot
White
Black
Neutral
BrownOrange
Gray
Red
Y / BY Y / R
HVAC
Load
PB PB PB
Power PackSwitchPP-A-J
LED Switch
RJ 12
RJ 12
RJ 12
6
SSecondary
PPrimary
All Off HVAC Load
Red
Red
120 - 277 VAC
24 VDCmax. 200 mA RJ12 male
to dual RJ12 female splitter
0.6 in.16 m
m0.94 in.24m
m
1.8 in./45mm
1 in.25 mm
DIMENSIONS DRAWING
27-0
5-20
16 –
880
4