mechanicalviva
TRANSCRIPT
The ultimate guide to mechanical
engineering viva questions
Here are some machine design viva
questions to make your profession in
mechanical engineering and these
mechanical engineering questions will be
very much required for you to groom
yourself.
1. Segment or Circular disc with uniform
thickness is the form used to make sunk key
and it is known as:
a) Woodruff key
b) Feather key
c) Kennedy key
2. In the assembly of pulley, key and shaft:
a) Key is made the strongest
b) All the three are designed for equal
strength
c) Key is made the weakest
d) Pulley is made the weakest
3. In a steam engine, piston rod and the
crosshead are usually connected by means
of:
a) Ball Joint
b) Cotter Joint
c) Universal Joint
4) The distribution of force along the length
of the key in a parallel sunk key is:
a) varies exponentially, being more at the
torque input end
b) varies exponentially, being less at torque
output end
c) Varies linearly
5) The key of a rectangular section and with
the help of shaft it is connencted to a spur
gear transmitting power. Stresses developed
in the key is fare:
a) Both shear and bearing stresses
b) Bearing stress alone
c) Shear stress alone
Our CAD CAM training institute is more than
enough for you to make your profession in
this field.