manufacturer’s certification ... - mastercraft® doors · manufacturer’s certification is an...

11
MANUFACTURER’S CERTIFICATION is an ENERGY STAR ® partner. fiberglass entrance doors have been tested by ETC Laboratories, Inc., verified by NAMI, and meet NFRC requirements. fiberglass entrance doors that display a permanent NFRC label on the stile of the door have been tested in accordance with NFRC 100 for U-factor and SHGC. doors that display a permanent NFRC label on the stile of the door, meet ENERGY STAR ® requirements in all fifty states and may qualify for tax credits as defined by the Tax Relief Unemployment Insurance Reauthorization, and Job Creation Act of 2010. Products that earn the ENERGY STAR ® meet strict energy efficiency guidelines set by the US Environmental Protection Agency and the Department of Energy. CERTIFICATION STATEMENT Under penalties of perjury, I declare that I have examined this certification statement, and to the best of my knowledge and belief, the facts presented are true, correct and complete. Kip Stuebs General Plant Manager Mastercraft® Doors ENERGY STAR ® and the ENERGY STAR ® mark are registered US marks. CERTIFIED ENERGY PERFORMANCE RATINGS Inswing or Outswing Door CPD# MID-M-2 Insulated Fiberglass Door PRODUCT DESCRIPTION* Default frame** Wood Individual Option Number ¼ Lite ≤ 410† ½ Lite ≤ 900† ¾ Lite ≤ 1100† Full Lite > 1100† IG/Clear/Air/0.25 IG/Clear/Air/0.75 IG/Clear/Air/0.25 with Grid IG/Clear/Air/ 0.50 ⁄ 0.81 w Blinds IG/0.14 (#2)/LowE/ Air/.0.50 with Blinds IG/0.20(3)/LowE/ Air/.0.75 IG/0.20(3)/LowE/ Air/.0.75 with Grid Triple Panel Decorative Flush / Embossed Air Leakage Manufacturer stipulates that these ratings conform to applicable NFRC procedures for determining whole product Consult manufacturer’s literature for other product performance information. * #glazing layers/spacer type/low-e per NFRC 100 †square inches 1btu/hr*ft2°F e.g., ABC-X-1-00001-00001 or 123-X-1-0001-00001 www.nfrc.org DO NOT REMOVE UNTIL AFTER FINAL INSPECTION 06360-00001 ----- ----- ----- 0.25 0.10 --- --- --- --- --- --- 06488-00001 ----- ----- ----- 0.24 0.10 --- --- --- --- --- --- 06548-00001 ----- ----- ----- 0.25 0.09 --- --- --- --- --- --- ----- 07304-00001 ----- ----- --- --- 0.23 0.14 --- --- --- --- ----- 07306-00001 ----- 07307-0001 --- --- 0.22 0.12 --- --- 0.25 0.21 06640-00001 ----- 06642-00001 ----- 0.22 0.08 --- --- 0.28 0.20 --- --- 06644-00001 ----- 06646-00001 ----- 0.22 0.07 --- --- 0.28 0.18 --- --- 07234-00001 07235-0001 06538-00001 ----- 0.22 0.09 0.25 0.15 0.27 0.21 --- --- 0.16 0.17 0.01 0.01 05447-00001 05446-00001 ≤0.3 cfm/ft 2 Certified in Highlighted Regions. Certificado Certified/Certificado For full information, see label on product. Para información completa, consultar la etiqueta del producto.

Upload: others

Post on 02-Jun-2020

5 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: MANUFACTURER’S CERTIFICATION ... - MASTERCRAFT® Doors · MANUFACTURER’S CERTIFICATION is an ENERGY STAR® partner. steel french patio entrance doors have been tested by ETC Laboratories,

MANUFACTURER’S CERTIFICATION is an ENERGY STAR® partner.

fiberglass entrance doors have been tested by ETCLaboratories, Inc., verified by NAMI, and meet NFRC requirements.

fiberglass entrance doors that display a permanentNFRC label on the stile of the door have been tested in accordance withNFRC 100 for U-factor and SHGC.

doors that display a permanent NFRC label on thestile of the door, meet ENERGY STAR® requirements in all fifty statesand may qualify for tax credits as defined by the Tax Relief UnemploymentInsurance Reauthorization, and Job Creation Act of 2010.

Products that earn the ENERGY STAR® meet strict energy efficiency guidelines set by the US Environmental Protection Agency and theDepartment of Energy.

CERTIFICATION STATEMENT Under penalties of perjury, I declare that I have examined this certification statement, and to the best of my knowledge and belief, the facts presented are true, correct and complete.

Kip Stuebs General Plant Manager Mastercraft® Doors

ENERGY STAR® and the ENERGY STAR® mark are registered US marks.

CERTIFIED

ENERGY PERFORMANCE RATINGS

Inswing or Outswing DoorCPD# MID-M-2

Insulated Fiberglass Door

PRODUCTDESCRIPTION*Default frame**

Wood

Individual Option Number

¼ Lite≤ 410†

½ Lite≤ 900†

¾ Lite≤ 1100†

Full Lite> 1100†

IG/Clear/Air/0.25

IG/Clear/Air/0.75

IG/Clear/Air/0.25with Grid

IG/Clear/Air/0.50 ⁄0.81 w Blinds

IG/0.14 (#2)/LowE/Air/.0.50 with Blinds

IG/0.20(3)/LowE/Air/.0.75

IG/0.20(3)/LowE/Air/.0.75 with Grid

Triple PanelDecorative

Flush / EmbossedAir LeakageManufacturer stipulates that these ratings conform to applicable NFRC procedures for determining whole product

Consult manufacturer’s literature for other product performance information. * #glazing layers/spacer type/low-eper NFRC 100 †square inches 1btu/hr*ft2°F

e.g., ABC-X-1-00001-00001 or 123-X-1-0001-00001 www.nfrc.org

DO NOT REMOVE UNTIL AFTER FINAL INSPECTION

06360-00001 ----- ----- -----

0.250.10

------

------

------

06488-00001 ----- ----- -----

0.240.10

------

------

------

06548-00001 ----- ----- -----

0.250.09

------

------

------

----- 07304-00001 ----- -----

------

0.230.14

--- ---

------

----- 07306-00001 ----- 07307-0001

------

0.220.12

------

0.250.21

06640-00001 ----- 06642-00001 -----

0.220.08

------

0.280.20

------

06644-00001 ----- 06646-00001 -----

0.220.07

------

0.280.18

------

07234-00001 07235-0001 06538-00001 -----

0.220.09

0.250.15

0.270.21

------

0.16 0.170.01 0.01 05447-0000105446-00001

≤0.3 cfm/ft2

Certified in Highlighted Regions.Certificado

Certified/Certificado

For full information, see label on product.Para información completa, consultar la etiqueta del producto.

Fiberglass 9" 2018.indd 2 11/1/18 10:20 AM

Page 2: MANUFACTURER’S CERTIFICATION ... - MASTERCRAFT® Doors · MANUFACTURER’S CERTIFICATION is an ENERGY STAR® partner. steel french patio entrance doors have been tested by ETC Laboratories,

MANUFACTURER’S CERTIFICATION is an ENERGY STAR® partner.

steel french patio entrance doors have been tested by ETC Laboratories, verified by NAMI, and meet NFRC requirements.

steel patio entrance doors that display a permanentNFRC label on the stile of the door have been tested in accordance withNFRC 100/200/500 for U-factor and SHGC.

doors that display a permanent NFRC label on thestile of the door, meet ENERGY STAR® requirements in Northern US Regions and may qualify for tax credits as defined by the Tax Relief Unemployment Insurance Reauthorization, and Job Creation Act of 2010.

Products that earn the ENERGY STAR® meet strict energy efficiency guidelines set by the US Environmental Protection Agency and theDepartment of Energy.

CERTIFICATION STATEMENT Under penalties of perjury, I declare that I have examined this certification statement, and to the best of my knowledge and belief, the facts presented are true, correct and complete.

Kip Stuebs General Plant Manager Mastercraft® Doors

ENERGY STAR® and the ENERGY STAR® mark are registered US marks.

ENERGY PERFORMANCE RATINGS

French Patio Entrance DoorsInswing or Outswing Door

CPD# MID-M-3Insulated Steel Wood Edge Door

PRODUCTDESCRIPTION*Default frame**

Wood

Individual Option Number¼ Lite ½ Lite ¾ Lite Full Lite

R: CLR Air Deco

I: CLRAirDecoCaming

Caming Air CLR,

Manufacturer stipulates that these ratings conform to applicable

any product and does not warrant the suitability of any product

*** Numbers below the performance ratings are referenced in the

DO NOT REMOVE UNTIL AFTER FINAL INSPECTION

----- ----- -----

------

------

------

0.310.30

----- ----- -----

------

------

------

0.310.29

----- ----- -----

------

------

------

0.280.31

----- ----- -----

------

------

------

0.240.26

Air Leakage

CERTIFIED

Certified in Highlighted Regions.

Certified/Certificado

Certificado

For full information, see label on product.Para información completa, consultar la etiqueta del producto.

Page 3: MANUFACTURER’S CERTIFICATION ... - MASTERCRAFT® Doors · MANUFACTURER’S CERTIFICATION is an ENERGY STAR® partner. steel french patio entrance doors have been tested by ETC Laboratories,

MANUFACTURER’S CERTIFICATION is an ENERGY STAR® partner.

steel french patio entrance doors have been tested by ETC Laboratories, verified by NAMI, and meet NFRC requirements.

steel french patio entrance doors that display a permanent NFRC label on the stile of the door have been tested in accordance with NFRC 100/200/500 for U-factor and SHGC.

doors that display a permanent NFRC label on thestile of the door, meet ENERGY STAR® requirements in Northern US Regions and may qualify for tax credits as defined by the Tax Relief Unemployment Insurance Reauthorization, and Job Creation Act of 2010.

Products that earn the ENERGY STAR® meet strict energy efficiency guidelines set by the US Environmental Protection Agency and theDepartment of Energy.

CERTIFICATION STATEMENT Under penalties of perjury, I declare that I have examined this certification statement, and to the best of my knowledge and belief, the facts presented are true, correct and complete.

Kip Stuebs General Plant Manager Mastercraft® Doors

ENERGY STAR® and the ENERGY STAR® mark are registered US marks.

Certified in Highlighted Regions.Certificado

Certified/CertificadoFor full information, see label on product.

Para información completa, consultar la etiqueta del producto.

ENERGY PERFORMANCE RATINGS

French Patio Entrance DoorsInswing or Outswing Door

CPD# MID-M-3Insulated Steel Wood Edge Door

PRODUCTDESCRIPTION*Default frame**

Wood

Individual Option Number¼ Lite ½ Lite ¾ Lite Full Lite

Manufacturer stipulates that these ratings conform to applicable

any product and does not warrant the suitability of any product

*** Numbers below the performance ratings are referenced in the

----- ----- -----

------

------

------

0.270.20

Air Leakage

CERTIFIED

DO NOT REMOVE UNTIL AFTER FINAL INSPECTION

----- ----- -----

------

------

------

0.290.20

Page 4: MANUFACTURER’S CERTIFICATION ... - MASTERCRAFT® Doors · MANUFACTURER’S CERTIFICATION is an ENERGY STAR® partner. steel french patio entrance doors have been tested by ETC Laboratories,

MANUFACTURER’S CERTIFICATION is an ENERGY STAR® partner.

steel center hinge patio entrance doors have been tested by ETC Laboratories, verified by NAMI, and meet NFRC requirements.

steel center hinge patio entrance doors that display a permanent NFRC label on the stile of the door have been tested in accordance with NFRC 100/200/500 for U-factor and SHGC.

doors that display a permanent NFRC label on thestile of the door, meet ENERGY STAR® requirements in Northern US Regions and may qualify for tax credits as defined by the Tax Relief Unemployment Insurance Reauthorization, and Job Creation Act of 2010.

Products that earn the ENERGY STAR® meet strict energy efficiency guidelines set by the US Environmental Protection Agency and theDepartment of Energy.

CERTIFICATION STATEMENT Under penalties of perjury, I declare that I have examined this certification statement, and to the best of my knowledge and belief, the facts presented are true, correct and complete.

Kip Stuebs General Plant Manager Mastercraft® Doors

ENERGY STAR® and the ENERGY STAR® mark are registered US marks.

CERTIFIED

ENERGY PERFORMANCE RATINGS

Center Hinge Patio Entrance DoorsInswing or Outswing Door

CPD# MID-M-3Insulated Steel Wood Edge Door

PRODUCTDESCRIPTION*Default frame**

Wood

Individual Option Number¼ Lite ½ Lite ¾ Lite Full Lite

R: CLR Air Deco

I: CLRAirDecoCaming

Caming Air CLR,

DO NOT REMOVE UNTIL AFTER FINAL INSPECTION

----- ----- -----

------

------

------

0.230.21

----- ----- -----

------

------

------

0.310.30

----- ----- -----

------

------

------

0.310.29

----- ----- -----

------

------

------

0.280.31

----- ----- -----

------

------

------

0.240.26

Air Leakage

Manufacturer stipulates that these ratings conform to applicable

any product and does not warrant the suitability of any product

*** Numbers below the performance ratings are referenced in the

Certified in Highlighted Regions.

Certified/Certificado

Certificado

For full information, see label on product.Para información completa, consultar la etiqueta del producto.

Page 5: MANUFACTURER’S CERTIFICATION ... - MASTERCRAFT® Doors · MANUFACTURER’S CERTIFICATION is an ENERGY STAR® partner. steel french patio entrance doors have been tested by ETC Laboratories,

MANUFACTURER’S CERTIFICATION is an ENERGY STAR® partner.

steel center hinge patio entrance doors have been tested by ETC Laboratories, verified by NAMI, and meet NFRC requirements.

steel center hinge patio entrance doors that display a permanent NFRC label on the stile of the door have been tested in accordance with NFRC 100/200/500 for U-factor and SHGC.

doors that display a permanent NFRC label on thestile of the door, meet ENERGY STAR® requirements in all fifty statesand may qualify for tax credits as defined by the Tax Relief UnemploymentInsurance Reauthorization, and Job Creation Act of 2010.

Products that earn the ENERGY STAR® meet strict energy efficiency guidelines set by the US Environmental Protection Agency and theDepartment of Energy.

CERTIFICATION STATEMENT Under penalties of perjury, I declare that I have examined this certification statement, and to the best of my knowledge and belief, the facts presented are true, correct and complete.

Kip Stuebs General Plant Manager Mastercraft® Doors

ENERGY STAR® and the ENERGY STAR® mark are registered US marks.

ENERGY PERFORMANCE RATINGS

Center Hinge Patio Entrance DoorsInswing or Outswing Door

CPD# MID-M-3Insulated Steel Wood Edge Door

PRODUCTDESCRIPTION*Default frame**

Wood

Individual Option Number¼ Lite ½ Lite ¾ Lite Full Lite

----- ----- -----

------

------

------

0.270.20

----- ----- -----

------

------

------

0.270.17

----- ----- -----

------

------

------

0.290.20

Air Leakage

Manufacturer stipulates that these ratings conform to applicable

any product and does not warrant the suitability of any product

*** Numbers below the performance ratings are referenced in the

Certified in Highlighted Regions.Certificado

Certified/CertificadoFor full information, see label on product.

Para información completa, consultar la etiqueta del producto.

CERTIFIED

DO NOT REMOVE UNTIL AFTER FINAL INSPECTION

Page 6: MANUFACTURER’S CERTIFICATION ... - MASTERCRAFT® Doors · MANUFACTURER’S CERTIFICATION is an ENERGY STAR® partner. steel french patio entrance doors have been tested by ETC Laboratories,

MANUFACTURER’S CERTIFICATION is an ENERGY STAR® partner.

sliding patio entrance doors with grids have been tested by ETC Laboratories, verified by NAMI, and meet NFRC requirements.

sliding patio entrance doors with grids that display a permanent NFRC label on the stile of the door have been tested in accordance with NFRC 100/200/500 for U-factor and SHGC.

doors that display a permanent NFRC label on thestile of the door, meet ENERGY STAR® requirements in all fifty statesand may qualify for tax credits as defined by the Tax Relief UnemploymentInsurance Reauthorization, and Job Creation Act of 2010.

Products that earn the ENERGY STAR® meet strict energy efficiency guidelines set by the US Environmental Protection Agency and theDepartment of Energy.

CERTIFICATION STATEMENT Under penalties of perjury, I declare that I have examined this certification statement, and to the best of my knowledge and belief, the facts presented are true, correct and complete.

Kip Stuebs General Plant Manager Mastercraft® Doors

ENERGY STAR® and the ENERGY STAR® mark are registered US marks.

Aluminum Clad Wood FrameSliding Patio Door

0.30

0.50 ≤ 0.3------

0.27

55

Additional Performance Ratings

Manufacturer stipulates that these ratings conform to applicable NFRC procedures for determining whole product performance. NFRC ratings are determined for a fixed set of environmental conditions and a specific product size. NFRC does not recommend any product and does not warrant the suitability of any product for any specific use.Consult manufacturer's literature for other product performance information.

www.nfrc.org

Energy Performance RatingsU-Factor (U.S. /I-P) Solar Heat Gain Coefficient

Condensation Resistance

Visible Transmittance Air Leakage (U.S. / I-P)

Dual Glazed LowE Arg/Air(90/10) FilledGrids Less Than 1”

CPD# MID-M-10-00029-00002

ENERGY STAR® Certified in All 50 States

Certified

Page 7: MANUFACTURER’S CERTIFICATION ... - MASTERCRAFT® Doors · MANUFACTURER’S CERTIFICATION is an ENERGY STAR® partner. steel french patio entrance doors have been tested by ETC Laboratories,

MANUFACTURER’S CERTIFICATION is an ENERGY STAR® partner.

sliding patio entrance doors, no grids, have been tested by ETC Laboratories, verified by NAMI, and meet NFRC requirements.

sliding patio entrance doors, no grids, that display a permanent NFRC label on the stile of the door have been tested in accordance with NFRC 100/200/500 for U-factor and SHGC.

doors that display a permanent NFRC label on thestile of the door, meet ENERGY STAR® requirements in all fifty statesand may qualify for tax credits as defined by the Tax Relief UnemploymentInsurance Reauthorization, and Job Creation Act of 2010.

Products that earn the ENERGY STAR® meet strict energy efficiency guidelines set by the US Environmental Protection Agency and theDepartment of Energy.

CERTIFICATION STATEMENT Under penalties of perjury, I declare that I have examined this certification statement, and to the best of my knowledge and belief, the facts presented are true, correct and complete.

Kip Stuebs General Plant Manager Mastercraft® Doors

ENERGY STAR® and the ENERGY STAR® mark are registered US marks.

Aluminum Clad Wood FrameSliding Patio Door

Dual Glazed LowE Arg/Air(90/10) FilledNo Grids

0.30

0.56------

0.30

55

CPD# MID-M-10-00029-00001

Additional Performance Ratings

Manufacturer stipulates that these ratings conform to applicable NFRC procedures for determining whole product performance. NFRC ratings are determined for a fixed set of environmental conditions and a specific product size. NFRC does not recommend any product and does not warrant the suitability of any product for any specific use.Consult manufacturer's literature for other product performance information.

www.nfrc.org

Energy Performance RatingsU-Factor (U.S. /I-P) Solar Heat Gain Coefficient

Condensation Resistance

Visible Transmittance

ENERGY STAR® Certified in All 50 States

Certified

≤ 0.3Air Leakage (U.S. / I-P)

Page 8: MANUFACTURER’S CERTIFICATION ... - MASTERCRAFT® Doors · MANUFACTURER’S CERTIFICATION is an ENERGY STAR® partner. steel french patio entrance doors have been tested by ETC Laboratories,

MANUFACTURER’S CERTIFICATION is an ENERGY STAR® partner.

sliding patio entrance doors with blinds have been tested by ETC Laboratories, verified by NAMI, and meet NFRC requirements.

sliding patio entrance doors with blinds that display a permanent NFRC label on the stile of the door have been tested in accordance with NFRC 100/200/500 for U-factor and SHGC.

doors that display a permanent NFRC label on thestile of the door, meet ENERGY STAR® requirements in all fifty statesand may qualify for tax credits as defined by the Tax Relief UnemploymentInsurance Reauthorization, and Job Creation Act of 2010.

Products that earn the ENERGY STAR® meet strict energy efficiency guidelines set by the US Environmental Protection Agency and theDepartment of Energy.

CERTIFICATION STATEMENT Under penalties of perjury, I declare that I have examined this certification statement, and to the best of my knowledge and belief, the facts presented are true, correct and complete.

Kip Stuebs General Plant Manager Mastercraft® Doors

ENERGY STAR® and the ENERGY STAR® mark are registered US marks.

Page 9: MANUFACTURER’S CERTIFICATION ... - MASTERCRAFT® Doors · MANUFACTURER’S CERTIFICATION is an ENERGY STAR® partner. steel french patio entrance doors have been tested by ETC Laboratories,

MANUFACTURER’S CERTIFICATION is an ENERGY STAR® partner.

steel decorative glass entrance doors have been tested by ETC Laboratories, verified by NAMI, and meet NFRC requirements.

steel decorative glass entrance doors that display a permanent NFRC label on the stile of the door have been tested in accordance with NFRC 100/200/500 for U-factor and SHGC.

doors that display a permanent NFRC label on thestile of the door, meet ENERGY STAR® requirements in Northern US Regions and may qualify for tax credits as defined by the Tax Relief Unemployment Insurance Reauthorization, and Job Creation Act of 2010.

Products that earn the ENERGY STAR® meet strict energy efficiency guidelines set by the US Environmental Protection Agency and theDepartment of Energy.

CERTIFICATION STATEMENT Under penalties of perjury, I declare that I have examined this certification statement, and to the best of my knowledge and belief, the facts presented are true, correct and complete.

Kip Stuebs General Plant Manager Mastercraft® Doors

ENERGY STAR® and the ENERGY STAR® mark are registered US marks.

CERTIFIED

ENERGY PERFORMANCE RATINGSPRODUCT

DESCRIPTION*Default frame**

Wood

U-Factor/Solar Heat Gain Coefficient (SHGC)Individual Option Number

¼ Lite≤ 410†

½ Lite≤ 900†

¾ Lite≤ 1100†

Full Lite> 1100†

Deco/Clear/Air0.313/0.313 O

Deco/Clear/Air0.250/0.250 A

IG/Clear/Air/0.25

Deco/Clear/Air0.313/0.313

Air Leakage

Flush / Embossed

Manufacturer stipulates that these ratings conform to applicable NFRC procedures for determining whole productperformance. NFRC ratings are determined for a fixed set of environmental conditions and a specific product size.NFRC does not recommend any product and does not warrant the suitability of any product for any specific use.Consult manufacturer’s literature for other product performance information. * #glazing layers/spacer type/low-eemissivity (surface) gap fill/gap width (na=not applicable) **per NFRC 100 †square inches 1btu/hr*ft2°F*** Numbers below the performance ratings are referenced in the NFRC Certified Products Directory.

e.g., ABC-X-1-00001-00001 or 123-X-1-0001-00001 www.nfrc.org

DO NOT REMOVE UNTIL AFTER FINAL INSPECTION

00319-00001 00320-00001 00321-00001 -----

0.160.09

0.200.17

0.220.23

------

00365-00001 00366-00001 ----- -----

0.190.10

0.250.19

------

------

00385-00001 00386-00001 00387-00001 -----

0.160.09

0.200.17

0.220.23

------

00361-00001 00362-00001 00363-00001 -----

0.170.09

0.200.17

0.230.23

------

≤0.3 cfm/ft2

U-Factor1 0.12 0.00SHGC00299/298-00001

Certi�ed in All 50 States

Certi�ed/Certi�cado

A

1

2

3

4

5

6

7

B C D

Label “D”Decorative All StateInswing or Outswing Door

CPD# MID-M-1Insulated Steel Wood Edge Door

IG/Clear/Air/0.758

IG/Clear/Air/0.764 A

IG/ClearAir/0.264/0.264 R

00389-00001 00390-00001 ----- -----

0.180.10

0.230.19

------

------

00393-00001 00394-00001 ----- -----

0.190.10

0.240.19

------

------

----- ----- 00403-00002 -----

------

------

0.300.24

------

Page 10: MANUFACTURER’S CERTIFICATION ... - MASTERCRAFT® Doors · MANUFACTURER’S CERTIFICATION is an ENERGY STAR® partner. steel french patio entrance doors have been tested by ETC Laboratories,

MANUFACTURER’S CERTIFICATION is an ENERGY STAR® partner.

steel decorative glass entrance doors have been tested by ETC Laboratories, Inc., verified by NAMI, and meet NFRC requirements.

steel decorative glass entrance doors that display a permanent NFRC label on the stile of the door have been tested in accordance with NFRC 100/200/500 for U-factor and SHGC.

doors that display a permanent NFRC label on thestile of the door, meet ENERGY STAR® requirements in all fifty statesand may qualify for tax credits as defined by the Tax Relief UnemploymentInsurance Reauthorization, and Job Creation Act of 2010.

Products that earn the ENERGY STAR® meet strict energy efficiency guidelines set by the US Environmental Protection Agency and theDepartment of Energy.

CERTIFICATION STATEMENT Under penalties of perjury, I declare that I have examined this certification statement, and to the best of my knowledge and belief, the facts presented are true, correct and complete.

Kip Stuebs General Plant Manager Mastercraft® Doors

ENERGY STAR® and the ENERGY STAR® mark are registered US marks.

CERTIFIED

ENERGY PERFORMANCE RATINGSPRODUCT

DESCRIPTION*Default frame**

Wood

U-Factor/Solar Heat Gain Coefficient (SHGC)Individual Option Number

¼ Lite≤ 410†

½ Lite≤ 900†

¾ Lite≤ 1100†

Full Lite> 1100†

IG/Clear/Air/0.29

IG/Clear/Air0.313/0.313 O

IG/Low E/Air/0.75 Grids

Deco/Clear/Air0.250/0.250 A

IG/Low E/Air/0.75 Grids

IG/Clear/Air/0.764 A

Deco/Clear/Air0.313/0.313

IG/Low E/Air/0.75

Air Leakage

Manufacturer stipulates that these ratings conform to applicable NFRC procedures for determining whole productperformance. NFRC ratings are determined for a fixed set of environmental conditions and a specific product size.NFRC does not recommend any product and does not warrant the suitability of any product for any specific use.Consult manufacturer’s literature for other product performance information. * #glazing layers/spacer type/low-eemissivity (surface) gap fill/gap width (na=not applicable) **per NFRC 100 †square inches 1btu/hr*ft2°F*** Numbers below the performance ratings are referenced in the NFRC Certified Products Directory.

e.g., ABC-X-1-00001-00001 or 123-X-1-0001-00001 www.nfrc.org

DO NOT REMOVE UNTIL AFTER FINAL INSPECTION

----- ----- 00302-00001 -----

------

--- ---

0.290.26

------

----- ----- ----- 00322-00001

------

------

------

0.250.31

----- ----- ----- 00312-00001

------

------

------

0.260.28

----- ----- ----- 00312-00004

------

------

------

0.260.26

----- ----- 00395-00001 -----

------

------

0.280.26

------

----- ----- ----- 00388-00001

------

------

------

0.250.31

----- ----- ----- 00312-00002

------

------

------

0.260.26

----- ----- ----- 00364-00001

------

------

------

0.260.30

≤0.3 cfm/ft2

Certi�ed in Highlighted Regions

Certi�ed/Certi�cado

A

1

5

2

3

6

4

7

8

B C D

Label “N”Northern Zone LabelInswing or Outswing Door

CPD# MID-M-1Insulated Steel Wood Edge Door

Page 11: MANUFACTURER’S CERTIFICATION ... - MASTERCRAFT® Doors · MANUFACTURER’S CERTIFICATION is an ENERGY STAR® partner. steel french patio entrance doors have been tested by ETC Laboratories,

MANUFACTURER’S CERTIFICATION is an ENERGY STAR® partner.

steel commodity glass entrance doors have been tested by ETC Laboratories, Inc., verified by NAMI, and meet NFRC requirements.

steel commodity glass entrance doors that display a permanent NFRC label on the stile of the door have been tested in accordance with NFRC 100/200/500 for U-factor and SHGC.

doors that display a permanent NFRC label on thestile of the door, meet ENERGY STAR® requirements in all fifty statesand may qualify for tax credits as defined by the Tax Relief UnemploymentInsurance Reauthorization, and Job Creation Act of 2010.

Products that earn the ENERGY STAR® meet strict energy efficiency guidelines set by the US Environmental Protection Agency and theDepartment of Energy.

CERTIFICATION STATEMENT Under penalties of perjury, I declare that I have examined this certification statement, and to the best of my knowledge and belief, the facts presented are true, correct and complete.

Kip Stuebs General Plant Manager Mastercraft® Doors

ENERGY STAR® and the ENERGY STAR® mark are registered US marks.

CERTIFIED

ENERGY PERFORMANCE RATINGS

Label “C”Commodity LabelInswing or Outswing Door

CPD# MID-M-1Insulated Steel Wood Edge Door

PRODUCTDESCRIPTION*Default frame**

Wood

U-Factor/Solar Heat Gain Coefficient (SHGC)Individual Option Number

¼ Lite≤ 410†

½ Lite≤ 900†

¾ Lite≤ 1100†

Full Lite> 1100†

IG/Clear/Air/0.75

IG/Clear/Air/0.75 Grids

IG/Clear/Air/0.29

IG/Clear/Air0.25 Grids

IG/Clear/Air/0.29 Grids

IG/Low E/Air/0.75

IG/Low E/Air/0.75 Grids

IG/Low E/Air/0.813 Blinds

IG/Clear/Air0.50 Vent

IG/Clear/Air/0.758

IG/Clear/Air/0.75 Grids

IG/Clear/Air/0.25

Air Leakage

Manufacturer stipulates that these ratings conform to applicable NFRC procedures for determining whole productperformance. NFRC ratings are determined for a fixed set of environmental conditions and a specific product size.NFRC does not recommend any product and does not warrant the suitability of any product for any specific use.Consult manufacturer’s literature for other product performance information. * #glazing layers/spacer type/low-eemissivity (surface) gap fill/gap width (na=not applicable) **per NFRC 100 †square inches 1btu/hr*ft2°F*** Numbers below the performance ratings are referenced in the NFRC Certified Products Directory.

e.g., ABC-X-1-00001-00001 or 123-X-1-0001-00001 www.nfrc.org

DO NOT REMOVE UNTIL AFTER FINAL INSPECTION

00300-00001 ----- ----- -----

0.190.10

--- ---

------

------

----- 00307-00002 ----- -----

------

0.240.18

------

------

00300-00002 ----- ----- -----

0.190.10

------

------

------

00315-00001 ----- ----- -----

0.190.10

------

------

------

----- 00301-00002 ----- -----

------

0.250.18

------

------

----- 00310-00001 ----- -----

------

0.210.16

------

------

----- 00310-00003 ----- -----

------

0.210.14

------

------

----- ----- ----- 00336-00001

------

------

------

0.280.17

----- 00337-00001 ----- -----

------

0.200.19

------

------

00389-00004 ----- ----- -----

0.180.10

------

------

------

----- 00301-00001 ----- -----

------

0.250.19

------

------

00315-00002 ----- ----- -----

0.190.10

------

------

------

≤0.3 cfm/ft2

Certi�ed in All 50 States

Certi�ed/Certi�cado

A

1

5

2

6

3

7

4

8

9

10

11

12

B C D