manufacturer’s certification certi˜ed in all 50 states€¦ · doors listed on this sheet may be...

4
MANUFACTURER’S CERTIFICATION is an ENERGY STAR ® partner. steel decorative glass entrance doors have been tested by ETC Laboratories, verified by NAMI, and meet NFRC requirements. steel decorative glass entrance doors that display a permanent NFRC label on the stile of the door have been tested in accordance with NFRC 100/200/500 for U-factor and SHGC. doors that display a permanent NFRC label on the stile of the door, meet ENERGY STAR ® requirements in Northern US Regions and may qualify for tax credits as defined by the Tax Relief Unemployment Insurance Reauthorization, and Job Creation Act of 2010. Products that earn the ENERGY STAR ® meet strict energy efficiency guidelines set by the US Environmental Protection Agency and the Department of Energy. CERTIFICATION STATEMENT Under penalties of perjury, I declare that I have examined this certification statement, and to the best of my knowledge and belief, the facts presented are true, correct and complete. Kip Stuebs General Plant Manager Mastercraft® Doors ENERGY STAR ® and the ENERGY STAR ® mark are registered US marks. CERTIFIED ENERGY PERFORMANCE RATINGS PRODUCT DESCRIPTION* Default frame** Wood U-Factor/Solar Heat Gain Coefficient (SHGC) Individual Option Number ¼ Lite ≤ 410† ½ Lite ≤ 900† ¾ Lite ≤ 1100† Full Lite > 1100† Deco/Clear/Air 0.313/0.313 O Deco/Clear/Air 0.250/0.250 A IG/Clear/ Air/0.25 Deco/Clear/Air 0.313/0.313 Air Leakage Flush / Embossed Manufacturer stipulates that these ratings conform to applicable NFRC procedures for determining whole product performance. NFRC ratings are determined for a fixed set of environmental conditions and a specific product size. NFRC does not recommend any product and does not warrant the suitability of any product for any specific use. Consult manufacturer’s literature for other product performance information. * #glazing layers/spacer type/low-e emissivity (surface) gap fill/gap width (na=not applicable) **per NFRC 100 †square inches 1btu/hr*ft2°F *** Numbers below the performance ratings are referenced in the NFRC Certified Products Directory. e.g., ABC-X-1-00001-00001 or 123-X-1-0001-00001 www.nfrc.org DO NOT REMOVE UNTIL AFTER FINAL INSPECTION 00319-00001 00320-00001 00321-00001 ----- 0.16 0.09 0.20 0.17 0.22 0.23 --- --- 00365-00001 00366-00001 ----- ----- 0.19 0.10 0.25 0.19 --- --- --- --- 00385-00001 00386-00001 00387-00001 ----- 0.16 0.09 0.20 0.17 0.22 0.23 --- --- 00361-00001 00362-00001 00363-00001 ----- 0.17 0.09 0.20 0.17 0.23 0.23 --- --- ≤0.3 cfm/ft 2 U-Factor 1 0.12 0.00 SHGC 00299/298-00001 Certified in All 50 States Certified/Certificado A 1 2 3 4 5 6 7 B C D Label “D” Decorative All State Inswing or Outswing Door CPD# MID-M-1 Insulated Steel Wood Edge Door IG/Clear/ Air/0.758 IG/Clear/ Air/0.764 A IG/ClearAir/ 0.264/0.264 R 00389-00001 00390-00001 ----- ----- 0.18 0.10 0.23 0.19 --- --- --- --- 00393-00001 00394-00001 ----- ----- 0.19 0.10 0.24 0.19 --- --- --- --- ----- ----- 00403-00002 ----- --- --- --- --- 0.30 0.24 --- ---

Upload: others

Post on 01-Oct-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: MANUFACTURER’S CERTIFICATION Certi˜ed in All 50 States€¦ · Doors listed on this sheet may be eligible to receive an energy tax credit as defined by The Tax Relief, Unemployment

MANUFACTURER’S CERTIFICATION is an ENERGY STAR® partner.

steel decorative glass entrance doors have been tested by ETC Laboratories, verified by NAMI, and meet NFRC requirements.

steel decorative glass entrance doors that display a permanent NFRC label on the stile of the door have been tested in accordance with NFRC 100/200/500 for U-factor and SHGC.

doors that display a permanent NFRC label on thestile of the door, meet ENERGY STAR® requirements in Northern US Regions and may qualify for tax credits as defined by the Tax Relief Unemployment Insurance Reauthorization, and Job Creation Act of 2010.

Products that earn the ENERGY STAR® meet strict energy efficiency guidelines set by the US Environmental Protection Agency and theDepartment of Energy.

CERTIFICATION STATEMENT Under penalties of perjury, I declare that I have examined this certification statement, and to the best of my knowledge and belief, the facts presented are true, correct and complete.

Kip Stuebs General Plant Manager Mastercraft® Doors

ENERGY STAR® and the ENERGY STAR® mark are registered US marks.

CERTIFIED

ENERGY PERFORMANCE RATINGSPRODUCT

DESCRIPTION*Default frame**

Wood

U-Factor/Solar Heat Gain Coefficient (SHGC)Individual Option Number

¼ Lite≤ 410†

½ Lite≤ 900†

¾ Lite≤ 1100†

Full Lite> 1100†

Deco/Clear/Air0.313/0.313 O

Deco/Clear/Air0.250/0.250 A

IG/Clear/Air/0.25

Deco/Clear/Air0.313/0.313

Air Leakage

Flush / Embossed

Manufacturer stipulates that these ratings conform to applicable NFRC procedures for determining whole productperformance. NFRC ratings are determined for a fixed set of environmental conditions and a specific product size.NFRC does not recommend any product and does not warrant the suitability of any product for any specific use.Consult manufacturer’s literature for other product performance information. * #glazing layers/spacer type/low-eemissivity (surface) gap fill/gap width (na=not applicable) **per NFRC 100 †square inches 1btu/hr*ft2°F*** Numbers below the performance ratings are referenced in the NFRC Certified Products Directory.

e.g., ABC-X-1-00001-00001 or 123-X-1-0001-00001 www.nfrc.org

DO NOT REMOVE UNTIL AFTER FINAL INSPECTION

00319-00001 00320-00001 00321-00001 -----

0.160.09

0.200.17

0.220.23

------

00365-00001 00366-00001 ----- -----

0.190.10

0.250.19

------

------

00385-00001 00386-00001 00387-00001 -----

0.160.09

0.200.17

0.220.23

------

00361-00001 00362-00001 00363-00001 -----

0.170.09

0.200.17

0.230.23

------

≤0.3 cfm/ft2

U-Factor1 0.12 0.00SHGC00299/298-00001

Certi�ed in All 50 States

Certi�ed/Certi�cado

A

1

2

3

4

5

6

7

B C D

Label “D”Decorative All StateInswing or Outswing Door

CPD# MID-M-1Insulated Steel Wood Edge Door

IG/Clear/Air/0.758

IG/Clear/Air/0.764 A

IG/ClearAir/0.264/0.264 R

00389-00001 00390-00001 ----- -----

0.180.10

0.230.19

------

------

00393-00001 00394-00001 ----- -----

0.190.10

0.240.19

------

------

----- ----- 00403-00002 -----

------

------

0.300.24

------

Page 2: MANUFACTURER’S CERTIFICATION Certi˜ed in All 50 States€¦ · Doors listed on this sheet may be eligible to receive an energy tax credit as defined by The Tax Relief, Unemployment

MANUFACTURER’S CERTIFICATION is an ENERGY STAR® partner.

steel decorative glass entrance doors have been tested by ETC Laboratories, Inc., verified by NAMI, and meet NFRC requirements.

steel decorative glass entrance doors that display a permanent NFRC label on the stile of the door have been tested in accordance with NFRC 100/200/500 for U-factor and SHGC.

doors that display a permanent NFRC label on thestile of the door, meet ENERGY STAR® requirements in all fifty statesand may qualify for tax credits as defined by the Tax Relief UnemploymentInsurance Reauthorization, and Job Creation Act of 2010.

Products that earn the ENERGY STAR® meet strict energy efficiency guidelines set by the US Environmental Protection Agency and theDepartment of Energy.

CERTIFICATION STATEMENT Under penalties of perjury, I declare that I have examined this certification statement, and to the best of my knowledge and belief, the facts presented are true, correct and complete.

Kip Stuebs General Plant Manager Mastercraft® Doors

ENERGY STAR® and the ENERGY STAR® mark are registered US marks.

CERTIFIED

ENERGY PERFORMANCE RATINGSPRODUCT

DESCRIPTION*Default frame**

Wood

U-Factor/Solar Heat Gain Coefficient (SHGC)Individual Option Number

¼ Lite≤ 410†

½ Lite≤ 900†

¾ Lite≤ 1100†

Full Lite> 1100†

IG/Clear/Air/0.29

IG/Clear/Air0.313/0.313 O

IG/Low E/Air/0.75 Grids

Deco/Clear/Air0.250/0.250 A

IG/Low E/Air/0.75 Grids

IG/Clear/Air/0.764 A

Deco/Clear/Air0.313/0.313

IG/Low E/Air/0.75

Air Leakage

Manufacturer stipulates that these ratings conform to applicable NFRC procedures for determining whole productperformance. NFRC ratings are determined for a fixed set of environmental conditions and a specific product size.NFRC does not recommend any product and does not warrant the suitability of any product for any specific use.Consult manufacturer’s literature for other product performance information. * #glazing layers/spacer type/low-eemissivity (surface) gap fill/gap width (na=not applicable) **per NFRC 100 †square inches 1btu/hr*ft2°F*** Numbers below the performance ratings are referenced in the NFRC Certified Products Directory.

e.g., ABC-X-1-00001-00001 or 123-X-1-0001-00001 www.nfrc.org

DO NOT REMOVE UNTIL AFTER FINAL INSPECTION

----- ----- 00302-00001 -----

------

--- ---

0.290.26

------

----- ----- ----- 00322-00001

------

------

------

0.250.31

----- ----- ----- 00312-00001

------

------

------

0.260.28

----- ----- ----- 00312-00004

------

------

------

0.260.26

----- ----- 00395-00001 -----

------

------

0.280.26

------

----- ----- ----- 00388-00001

------

------

------

0.250.31

----- ----- ----- 00312-00002

------

------

------

0.260.26

----- ----- ----- 00364-00001

------

------

------

0.260.30

≤0.3 cfm/ft2

Certi�ed in Highlighted Regions

Certi�ed/Certi�cado

A

1

5

2

3

6

4

7

8

B C D

Label “N”Northern Zone LabelInswing or Outswing Door

CPD# MID-M-1Insulated Steel Wood Edge Door

Page 3: MANUFACTURER’S CERTIFICATION Certi˜ed in All 50 States€¦ · Doors listed on this sheet may be eligible to receive an energy tax credit as defined by The Tax Relief, Unemployment

Manufacturer’sCertification Midwest Manufacturing 5311 Kane Rd., Eau Claire, WI 54703

Steel Decorative entrance doors for all US States have been tested by ATI Laboratories, verified by NAMI, and meet NFRC requirements. Steel Decorative entrance doors for all US States that display a permanent NFRC label on the stile of the door have been tested in accordance with NFRC 100/200 for U-factor and SHGC. This manufactur-er’s certification statement is for Mastercraft® inswing and outswing insulated Steel Decorative doors for all States that were purchased on or after January 1, 2011 through December 31, 2016. Doors listed on this sheet may be eligible to receive an energy tax credit as defined by The Tax Relief, Unemployment Insurance Reauthorization, and Job Creation Act of 2010.

Under penalties of perjury, I declare that I have examined this certification statement, and to the best of my knowledge and belief, the facts are true, correct and complete.

Kip StuebsMidwest ManufacturingPrehung Door PlantGeneral Manager

Mastercraft® Inswing or Outswing Insulated Steel Decorative Door CPD# MID-M-1 Window Size Size Thickness Grid U-Factor SHGC Flush 0.11 0.01 Embossed 0.12 0.01Decorative Steel Door with 1/4 Lite ≤ 410 1” O: Clear Deco 0.17 0.09Decorative Steel Door with 1/4 Lite ≤ 410 1” Wrought Iron Clear Deco 0.18 0.09Decorative Steel Door with 1/4 Lite ≤ 410 1” R: Clear Deco 0.17 0.09Decorative Steel Door with 1/4 Lite ≤ 410 1” M: Clear Deco 0.16 0.09 Decorative Steel Door with 1/4 Lite ≤ 410 1” A: Clear Deco 0.17 0.08Decorative Steel Door with 1/4 Lite ≤ 410 1” I: Clear Deco 0.17 0.09 Decorative Steel Door with 1/4 Lite ≤ 410 1” R: LowE Deco Clear 0.17 0.09Decorative Steel Door with 1/4 Lite ≤ 410 1” I: SG 500 Deco Clear 0.16 0.07Decorative Steel Door with 1/2 Lite ≤ 900 1” O: Clear Deco 0.21 0.16Decorative Steel Door with 1/2 Lite ≤ 900 1” Wrought Iron Clear Deco 0.24 0.18Decorative Steel Door with 1/2 Lite ≤ 900 1” R: Clear Deco 0.21 0.17Decorative Steel Door with 1/2 Lite ≤ 900 1” M: Clear Deco 0.20 0.16 Decorative Steel Door with 1/4 Lite ≤ 900 1” A: Clear Deco 0.21 0.16Decorative Steel Door with 1/2 Lite ≤ 900 1” I: Clear Deco 0.20 0.16 Decorative Steel Door with 1/2 Lite ≤ 900 1” R: LowE Deco Clear 0.21 0.16Decorative Steel Door with 1/2 Lite ≤ 900 1” I: SG 500 Deco Clear 0.19 0.14Decorative Steel Door with 3/4 Lite ≤ 1100 1” O: Clear Deco 0.23 0.21Decorative Steel Door with 3/4 Lite ≤ 1100 1” Wrought Iron Clear Deco 0.27 0.23Decorative Steel Door with 3/4 Lite ≤ 1100 1” R: Clear Deco 0.24 0.22Decorative Steel Door with 3/4 Lite ≤ 1100 1” M: Clear Deco 0.23 0.21 Decorative Steel Door with 3/4 Lite ≤ 1100 1” A: Clear Deco 0.23 0.21Decorative Steel Door with 3/4 Lite ≤ 1100 1” I: Clear Deco 0.23 0.21 Decorative Steel Door with 3/4 Lite ≤ 1100 1” R: LowE Deco Clear 0.24 0.21Decorative Steel Door with 3/4 Lite ≤ 1100 1” I: SG 500 Deco Clear 0.21 0.18Decorative Steel Door with Full Lite > 1100 1” I: SG 500 Deco Clear 0.24 0.24

Page 4: MANUFACTURER’S CERTIFICATION Certi˜ed in All 50 States€¦ · Doors listed on this sheet may be eligible to receive an energy tax credit as defined by The Tax Relief, Unemployment

Manufacturer’sCertification Midwest Manufacturing 5311 Kane Rd., Eau Claire, WI 54703

Decorative Steel entrance doors for northern States have been tested by ATI Laboratories, verified by NAMI, and meet NFRC requirements. Decorative Steel entrance doors for northern States that display a permanent NFRC label on the stile of the door have been tested in accordance with NFRC 100/200 for U-factor and SHGC. This manufactur-er’s certification statement is for Mastercraft® inswing and outswing insulated Decorative Steel entrance doors for northern States that were purchased on or after January 1, 2011 through December 31, 2016. Doors listed on this sheet may be eligible to receive an energy tax credit as defined by The Tax Relief, Unemployment Insurance Reauthorization, and Job Creation Act of 2010.

Under penalties of perjury, I declare that I have examined this certification statement, and to the best of my knowledge and belief, the facts are true, correct and complete.

Kip StuebsMidwest ManufacturingPrehung Door PlantGeneral Manager

Mastercraft® Inswing or Outswing Insulated Decorative Steel Door CPD# MID-M-1 Window Size Size Thickness Grid U-Factor SHGC Decorative Steel Door with Full Lite > 1100 1” O: Clear Deco 0.28 0.29Decorative Steel Door with Full Lite > 1100 1” Wrought Iron Clear Deco 0.28 0.30Decorative Steel Door with Full Lite > 1100 1” R: Clear Deco 0.26 0.28Decorative Steel Door with Full Lite > 1100 1” M: Clear Deco 0.27 0.27Decorative Steel Door with Full Lite > 1100 1” A: Clear Deco 0.26 0.28Decorative Steel Door with Full Lite > 1100 1” I: Clear Deco 0.28 0.28Decorative Steel Door with Full Lite > 1100 1” R: LowE Deco Clear 0.28 0.28Decorative Steel Door with Full Lite > 1100 1” I: SG 500 Deco Clear 0.28 0.26