6

Q: What are the things needed to be done

before construction?

A: First, get the design apporve by the client to ensure

they know what are we doing then we proceed with the

stage which is get approval from the development

authorities. It can be from local authorities, for here

Kuala Lumpur is under DBKL or it can be Bomba which

is fire authority.

Q: What are the things needed to be done

during construction?

A: I would say the main important consultant will be

architects, C&S, M&E. and of course QS. QS monitor the

cost and ensure the budget is monitored througout the

construction period. Then, Architect we called it as SO

( supervising officer). QS will advice us should there any

additional cost and etc so architect have to monitor it

from the QS’s advices.

Q: What are the things needed to be done

after completion?

A: There is some complains because the buidling is

buildt by human so there will be some mistakes.

Therefore this is the thing that architect have to

monitor, to ensure that all these defects are being

rectified by the contrator

Special thanks to : A&A

ARCHITECTURE SDN BHD

Edited by: Mok Po Yi 0318207

We learned much and gain more specific

knowledge from experienced architect yet we know

more about architect this area.

Taylor’s

University