machined timber guide - coomers · say ‘yes’ to responsibly produced timber: buy fsc-certified...
TRANSCRIPT
TIMBER & BUILDING SUPPLIES
Available from all our branches, we stock a wide range of softwood machined timber in many different sections of Planed All Round (PAR). We also stock door lining sets and a selection of mouldings including architraves, skirtings, cladding, flooring, windowboard and fascia.
Machined timber is perfect for indoor use and provides a suitable surface for your chosen finish.
In Conjuction with SCA Merchant Services
coomers.co.uk
Machined Timber Guide
First for Service
Connect with us
BULLNOSE ROUND19mm x 50mm19mm x 75mm
ARCHITRAVE AND SKIRTING
OGEE25mm x 63mm25mm x 75mm
TORUS/OGEE25mm x 125mm25mm x 150mm25mm x 175mm
SHIPLAP AND CLADDING
PTGV13mm x 100mm16mm x 100mm19mm x 100mm
TREATEDSHIPLAP19mm x 125mm
TREATEDTGV PANELLING19mm x 125mm
REBATED SHIPLAP (PATTERN B)19mm x 125mm19mm x 150mm
HANDRAILS
WALLFIX50mm x 100mm
MOPSTICK50mm x 50mm
FLOORING
REDWOOD 12% KILN DRIED25mm x 125mm25mm x 150mm
DOOR LININGS
DOOR LINING SETS WITH16 x 38mm DOORSTOP(to suit door sizes 2’3” or 2’6” or 2’9”)
NOMINAL FINISHED32 x 115mm 27 x 108mm32 x 138mm 27 x 132mm32 x 175mm 27 x 155mm
WINDOWBOARDS
DOORSTOPS
WINDOWBOARD32mm x 225mm
CHAMFERED19mm x 50mm19mm x 75mm
Always checkthe CERTIFIRE
label!
BWF APPROVED FIRE CHECK DOOR LINING SETS INC.32 x 38mm FIRE CHECK DOORSTOPNOMINAL FINISHED38 x 138mm 30 x 132mm
(Intumescent Groove Size 15mm x 4mm)
FASCIA
DOORSTOPS16mm x 38mm19mm x 38mm
WEATHER MOULD50mm x 63mm
MOULDINGS
All sizes stated on this poster are NOMINAL - please see technical information for finished sizes.All products featured in this guide are FSC-Certified.
WHITEWOOD22mm x 125mm
DADO RAIL
DADO RAIL25mm x 75mm
GROOVED REDWOODFASCIA25mm x 175mm
16mm 12mm
x 38 33
19mm 14.5mm
x 38 33 x 50 44 x 75 69 x 100 95
25mm 20.5mm
x 25 20.5 x 38 33 x 50 44 x 75 69 x 100 95 x 125 120 x 150 144 x 175 169 x 200 193 x 225 218
32mm 27mm
x 38 33 x 115 108 x 138 133 x 150 144 x 225 218
38mm 33mm
x 38 33 x 50 44
50mm 44mm
x 50 44 x 75 69 x 100 95 x 150 144
75mm 69mm
x 75 69
100mm 95mm
x 100 95
Planed SectionsPLANED ALL ROUND SECTIONS (PAR)
NominalSize (mm)
ActualSize (mm)
NominalSize (mm)
ActualSize (mm)
NominalSize (mm)
ActualSize (mm)
NominalSize (mm)
ActualSize (mm)
Our Certified Timber
Technical Information
Sustainable timber? Certified timber? Environment-friendly?If you’ve been asked environmental questions on where your timber comes from, Coomers can help you to answer them. We support the internationally recognised Forest Stewardship Council system (FSC ).
What is the FSC and who supports it?The Forest Stewardship Council is a world-wide, non-profit, non-governmental organisation. It promotes the responsible growing, harvesting and on-going replanting of timber. The FSC system is supported by major environmental and conservation organisations.You may find specifications from local authorities or architects asking for FSC-certified timber: you can obtain FSC timber and wood products from Coomers.
How can FSC help you?Telling your customers that you’re buying FSC-certified timber from a Coomers branch could open up new business. For example local authorities and other government buying departments have sustainability criteria to meet and may value this knowledge.Coomers has FSC ‘chain of custody’ for each of our branches, covering certain timber product lines. We are expanding this range currently to meet your demands.
SAY ‘YES’ TO RESPONSIBLY PRODUCED TIMBER:BUY FSC-CERTIFIED PRODUCTS FROM COOMERS.(All products featured in this guide are FSC-Certified)
Moisture contentTimber, which is a natural product containing moisture, is dried artificially after the initial logging process, causing the wood to shrink. A certain amount of residual drying and shrinkage continues until stabilisation is reached. In a centrally heated home, lateral shrinkage of 2.5 - 3% is quite normal for new machined profiles.
Finished sizesMost sizes quoted are nominal, actual finished dimensions are given in the table inside this leaflet. (All sizes are approximate).
Matching boards and natural shrinkageIn common with the majority of matching, beaded matching & shiplap products available, please be aware that profiles are liable to shrink laterally by 2.5-3% when fitted in a normally centrally heated home. It can be a good idea to allow time for the product to ‘settle in’ before applying any finishing coatings.
Flooring boards and natural shrinkageIn common with most replacement flooring, please be aware that the above products will shrink laterally by 2.5 - 3% when fitted in a normally centrally heated home. This normal occurrence should be considered if the floor is to be a stained or polished feature floor without carpeting.
Coomers 25mm Redwood Flooring is 12% kiln dried to minimise shrinkage.