laser assisted forming dieter schuöcker alexander kratky, department of nonconventional processing,...
TRANSCRIPT
Laser Assisted Forming
Dieter Schuöcker
Alexander Kratky,
Department of Nonconventional Processing, Forming and Laser Technology Vienna University of Technology / Austria
(European Union)
Content
• Introduction• Bending• Wire Drawing• Deep Drawing• Outlook
Introduction
source : Doege/Meyer-NolkemperSaeed Fließkurvenatlas metallischer Werkstoffe
Bending
• avoiding cracks and rupture
• reduce springback effect
• increase angle of bend
• reduce bend radius
Wire Drawing
Deep Drawing
• drawability
• depth of draw
• finish drawing
• influence material flow
Deep Drawing Tool
• diameter punch 48mm
• isolating layer on blankholder and die
Deep Drawing Dilas
• flat temperature profile
• limited temperature
Deep Drawing Fiber
Deep Drawing Fiber
Deep Drawing Laser Finger
Deep Drawing Laser Finger
Outlook• Bending: suitable for industrial use• Wire drawing: finishing the
experimental setup• Deep Drawing:
– lubricants,
– testing different materials,
– tailored blanks,
– diodes into the tool
Laser Assisted FormingEND