Jabo-2

JABO-series Remote Control Bait Boat has won of CE and Rosh. Our product has been exported to over 30 countries and is well received by fishing fans for its integrated design, accurate control, stable performance and simple operation.

Authentication

circuit

The hull is made from tough durable ABS and is waterproof at all parts by sealing rings. JABO-2 Remote Control Bait Boat can send your bait and hook to wherever you want. With its 3 directional lights, it will always be in your control even at night. Jabo-2B has the additional function of wireless fish-finding, fish-tempting, water depth/temperature detecting, all of which make it a world- leading bait boat. Main Function and Characteristics

Specification

Dimension: 600mm×240mm×180mm Weight: 4.25 Kg (including storage battery) Power supply: 1.2v/4.3 Ah Continuous working time: 3 hours Operating range: 300m Speed: 2 m/s Boat Battery: lead acid (chargeable) Radio frequency: 433 MHz (British standard) &315 MHz (American standard) Max Bait capacity: 2kg Depth detecting range: 1-32m (Jabo-2B) Temperature detecting range:0-50℃(Jabo-2B) Fish-tempting light: 3-5w (Jabo-2B)

Notice

Please read the content below before sailing. 1. Please fasten all the screws and charge the boat battery before each sailing. 2. The battery is fully charged when the indicating light turns green. It takes 10-14hours to charge the battery to the full 3. Battery of the remote control must be full. 4. Please pay attention to the anode and cathode of the battery before putting

them into the remote control 5. Don’t overload the bait container. 6. Please charge the battery when hearing the low-battery buzz. 7. Please turn off the switch after each usage of the remote control. 8. Please charge the boat battery every two months when not using it for a

long time. 9. Please keep the boat in a dry place and take out the batteries of the remote

control. 10. Don’t exceed the max operating range.

Pre-use Inspection

JABO Remote Control Bait Boat will be strictly tested after assembling. However, to ensure the sailing stability pre-use check is necessary. 1. Automatic ID learning：Put the boat on a flat board, turn on the switches of both boat and remote control. Press any button of the remote control; the boat will start to learn the unique id of remote control when the power light is flashing, the power light will stop flashing when it finishes learning. 2. Sailing forward: Press the forward button, the 3 directional lights are on the condition of normal operation. 3. Turning: press the left and right button separately to check if each of the motors works well. 4. Stop: Press the stop button, the boat is in the mode of stop. 5. Bait & hook dropping: Make sure that the boat is in the mode of stop, Press the hooking button, and hop will flick over and the fishing line rolled on the electromagnet switch will be released. Showing of storage battery Installation

1 Please open the cabin with a Philips screw driver.

2 Plug the power supply into the outlet on the circuit board, and keep the grooved surface upward.

3 Connect the power of the storage battery. Notice: Connect the black wire to the cathode junction column and connect the red wire to the anode junction column.

4. Put the storage battery into the cabin. Fix the battery well to prevent the cabin from damage caused by battery’s sliding.

5. Cover the cabin cap, fix waterproof gum ring, and then tighten the hopper.

6. Remove the protective cap. The power light will turn red when the boat is switched on . Please charge the battery when hearing the low-battery buzz.

Showing of position of bait and hook 饵料放仓鱼线挂钩示意图

Showing of Sailing

Showing of Charging

Instruction for Remote Control –Style A

Forward Button

Hooking Button

Stop Button

Signal Directional Light

Antenna

Charging Socket

Power Switch

Right-turning Button Left-turning Button

Instruction for Remote Control –Style B

Manual for Remote Control

1. Water temperature, ID code display. 2. Voltage of boat and Remote control display. 3. Fish symbol display. 4. Electricity of boat display. 5. Electricity of remote control display.

6. Water depth display. 7. Supersonic wave display. 8. Boat state display. 9. Movement of bait container display. 10. Fish-tempting lamp display. 11. Fish-tempting lamp display 12. Location of fish display. 13. Fish-tempting lamp button. 14. LCD backlight button. 15. LCD content demo button 16. Settings button 17. Left-turning button 18. Forward button 19. Right-turning button 20. Stop button 21. Baiting-releasing button 22. Power switch of remote control 23. Data- 24. Data+ Using sonar technology, the fish finder can detect fish from 1 to 32m under water.

Fish Finder Button Function Instruction Water Temperature, ID code Display: Displays water temperature and ID code. Voltage display : Display voltage of power battery (SHIP signal flashes), or voltage of

remote control battery (TR signal flashes). Water Depth display : Displays data about water depth. Boat State Display : Display state of the boat currently. Lamp button : Fish-tempting lamp switch Backlight button : LCD backlight switch Demo button : Fish finder display demonstration Set button : Press+button or -button to set ID code and sensitivity of supersonic

Detecting. Press SET button, and addr on LCD flashes. Then press data+ button or data- button to set address code.

Before launching, ID code of the boat should be adjusted according to the remote control. You can choice any number among 1—255 freeely through setting function. When there are two or more boats in the same water area, different ID codes should be set to different boats, so the boats won’t be interfered one another. Please do not reset ID code of the remote control after launching, or the boat can’t receive the operating signals.

Press SET button, and >>>> flashes. Then press +button or - button to set the sensitivity of supersonic detecting

Different water depth,quality etc. will effect supersonic sonar detecting, so sensitivity of supersonic detecting should be adjusted properly. Set lower sensitivity if in shallow water, high sensitity in deep water.

Left-turning button : Used to control left-turning movement of the boat. The boat will stop movement immediately since you remove your fingers from the button.

Forward button : Used to control forward movement of the boat. If you remove your fingers from this button, the boat will stop 30 seconds. So press Stop button if you want to stop the boat at once.

Right-turning button : Used to control right-turning movement of the boat. The boat will stop movement immediately since you remove your fingers from the button.

Stop button : Used to stop movement of the boat. Bait-releasing button : Press stop button before the operation of bait-releasing, then press the

bait-locating button. Power Switch of Remote Control : Remote Control switch

Fish-tempting light Display LCD Demo (不用)

Supersonic Sensitivity Setting Boat State Display Bait cabin State Display

Boat Battery Display Remote Control battery Display Water Temperature Display

Water-depth Display Boat Low battery warning Remote Control Low battery warning

Fish location Display 不要 不要