italo urban brochure 29-01-2014 small

Italo urban

External Lighting CatalogueOverview

Italoexclusive design

urban

Design

LED LIGHTINGmodel Italo Urban3

Aesthetic design certainly played a signifi-cant role in the design process. The new LED product range is characterized by a defined light-style, as a result of accurate research on forms and light perception. AEC opens up new frontiers in outdoor lighting, promoting design excellence and optimum performance.

2

Great design is all about details. With innovative material selection,

sensible construction techniques and modern aesthetics one can craft a unique design language that sets a new standard.

Design


Aesthetic design certainly played a signifi-cant role in the design process. The new LED product range is characterized by a defined light-style, as a result of accurate research on forms and light perception. AEC opens up new frontiers in outdoor lighting, promoting design excellence and optimum performance.

4

PROTECTION AGAINST OVERVOLTAGE

A lighting device installed in a standard elec-trical system may be subjected to voltagefluctuations and external disturbances due to different factors such as discontinuous loads on the line, faults on the lines (upstream or downstream) and atmospheric electricaldischarges (in outdoor installations). In those LED installations where the electronic com-ponents are predominant, an adequate resis-tance to surges is synonymous with reliability and proper functionality.Thanks to the research and the experimenta-tion performed in its own laboratories, AECoffers its customers customized solutions ac-cording to every specific installation.

CLASS I: protection up to 10kV.CLASS II: protection from 5kV up to 9kV.

For more information about the protection against overvoltage, please download the technical report at

Possibility to install a twilight switch that allows to automatically turn the unit on at sunset and to turn it off at sunrise.

FC (PHOTOCELl) OPTION

Light flux regulation using power line communication.Light flux reduction can be associated with punctual and remote monitoring of the individual device via the power line com-munication remote control. This option, used in conjunction with an LCU (Light Control Unit), makes it possible to control an individual lighting point, allowing the creation of customised lighting scenarios. More complex remote control panels can be used as part of a wireless or GSM/GPRS network, to remotely monitor the energy consumption of the system and provide fault indications as necessary without the need for on-site maintenanceprocedures.

PLM OPTION


Detail

10


materials

12

POLESteel pole in any variety you can imagine...

BRACKET

Post top or brackets mountingin die cast aluminum

HEAT SINK

Heat sink in die cast aluminum UNI EN 1706 with lamellar de-sign.01).

FRAMEFrame and cover in die cast alumi-num alloy UNI EN 1706.

CLOSURE

Closure hook in extruded aluminum with stainless steel spring.

Housing: Extrude aluminium

Ballast Compartment: Extruded aluminium

Heat sink Extruded aluminium

Optic High efficiency metalized polycarbonate

Screen Tempered 4mm th.

Cable clamp PlasticM20x1.5 - IP68

Standard colour Graphite (GGT)

Ordering sequence(Model Name) + (Wattage plus Current) + (Desired Voltage) +

(Optical System) + (Options) + (Color)

110÷277V 50/60Hz

Voltage:

Color:BLT - black texure

WHT - white texture

GGT - graphite grey

BLUT - blue texture

GRNT - green texture

SLT - silver texture* - please remove letter T if flat finish is requested (not recommended)

Control system:- DIM-FIX: Fixed and programmed current

- DIM-AUTO: Automatic dimming profile with integrated timer

- DIM-PROG: Automatic and programmable dimming profile

- PLM: Conveyed wave (Power Line Management)

Optical unit:Solid state optical system made with 18-27-36-45-54 LED

Colour Temperature 6000K, 4000K, 3000K

IES Type II, III, IV, V

Optical unit life:(Ta=25°C)

525 mA≥70.000hr B20L80 (including critical failures)

≥90.000hr L80, TM21

700 mA≥50.000hr B20L80 (including critical failures)

≥70.000hr L80, TM21

Options:PCR - Photocell Receptacle (pole mounted)

HSS - House Side Shield

FG - Frosted glass

LAMP CODE DEFINITION

40 W | 36 LED | 4 K

Lamp wattage

Number of diodes

CoLor temperature


technical sheet

ELECTRICAL CHARACTERISTICS

• Insulation class: I, II.

• Power supply: 230V - 50Hz.

• Ferromagnetic power supplyunit, efficiency EEI = A3.

• Superimposed pulse ignitorwith timer upon request.

• Power factor: > 0.9 (at fullload).

• Connection for cables featuredby a maximum cross section of4mmq.

• Integrated on-load switch forluminaires in class II.

• Anti-burst capacitor.

• Ceramic lamp holder.luminaires in class II.

• Anti-burst capacitor.

• Ceramic lamp holder.

14

technical sheet

LED LIGHTINGmodel Italo Urban1716Gamma Angles

cd/klm

180 120

105

90

75

60

45

105

90

75

60

45

30 3015 150

100

100

200

300

400

500

Gamma Angles 180 120

105

90

75

60

45

105

90

75

60

45

30 3015 150

150

150

300

450

600

750 cd/klm


105

90

75

60

45

105

90

75

60

45

30 3015 150

150

150

300

450

600

750 cd/klm


105

90

75

60

45

105

90

75

60

45

30 3015 150

150

150

300

450

600

750 cd/klm


105

90

75

60

45

105

90

75

60

45

30 3015 150

90

90

180

270

360

450 cd/klm


105

90

75

60

45

105

90

75

60

45

30 3015 150

150

150

300

450

600

750 cd/klm

DIMMING OPTIONS

LED technology offers easy and reliable light flux adjustment. The devices are equipped with an electronic power sup-ply capableof adjusting light emission by directly regulating the optical assembly LED in-put current. The standard version of the device issupplied with a constant LED input cur-rent of 525mA or 700mA.The following options are available:

DA (DIM-AUTO) OPTIONAutomatic light flux regulation

DAC OPTION (DIM-AUTO custom pro-file)The power supply is configured using a dimming profile totally customizable by the user (up to 5 levels in 4 steps).

PLM OPTIONLight flux regulation using power line communication

LCU OPTIONLight control unit

OPTIONS ON REQUEST:

D10 (DIM-10) OPTIONFlux adjustment via 1-10V analogue con-trol

DALI OPTION (Digital Addressable Light-ing Interface)Flux adjustment via digital interface

DB (DIM-BIP) OPTIONBi-power light flux adjustment with pilot cable

DR (DIM-REG) OPTIONLight flux adjustment with flux controllers

ADDITIONAL OPTIONS

FLC OPTIONLED light flux recovery

FR (FULL RANGE) OPTION - Extended in-put voltage range

FC (PHOTOCELl) OPTIONPossibility to install a twilight switch that allows to automatically turn the unit on at sunset and to turn it off at sunrise.

SSymmetric optic


105

90

75

60

45

105

90

75

60

45

30 3015 150

80

80

160

240

320

400 cd/klm

Rotosymmetrical optic for ur-ban and parking areas lighting.

TSStreet optics for road center

Asymmetrical optic for street lighting (suspended mounting).

STWWide emission street optic

Asymmetrical optic for wide streets and wet asphalt. Specif-ic optic for roadways where the width corresponds to 1,2 times the pole height.

STU-SUrban street optic

Asymmetrical optic for street and cycle path lighting. Specific optic for roadways where the width corresponds to 0,8 times the pole height.

STU-MUrban street optic

Asymmetrical optic for street and cycle path lighting. Specific optic for roadways where the width is equivalent to the pole height.

STE-SSuburban street optic

Asymmetrical optic for street and motorway lighting. Specif-ic optic for roadways where the width corresponds to 0,8 times the pole height.

STE-MSuburban street optic

Asymmetrical optic for street and motorway lighting. Specif-ic optic for roadways where the width is equivalent to the pole height.

mountings

Luminaire Flux¹(Ta=25°, 4000K, lm)

modules525mA 700mA

STE-M/STE-S/STW Optic

1 2060 2600

2 4120 5170

3 6180 7760

4 8240 10350

5 10300 12940

6 12360 15520

7 14410 -

8 16470 -

modules STU-M / STU-S Optic

1 1550 1940

2 3090 3880

3 4640 5830

4 6180 7760

5 7730 9710

6 9270 11640

7 10820 13590

8 12360 15520

9 13900 -

Rated LED Flux²(Ta=85°, 4000K, lm)

525mA 700mA


2445 3057

4890 6114

7335 9171

9780 12228

12225 15285

14670 18342

17115 -

19560 -

STU-M/STU-S Optic

1814 2239

3628 4478

5442 6717

7256 8956

9070 11195

10884 13434

12698 15673

14512 17912

16326 -

Rated Luminaire Power¹(Ta=25°, VIN=230 Vac, W)³

modules525mA 700mA


1 20 26

2 39 53

3 59 79

4 79 105

5 98 131

6 118 158

7 138 -

8 158 -

modules STU-M/STU-S Optic

1 15 20

2 30 40

3 44 59

4 59 79

5 74 99

6 89 119

7 103 138

8 118 158

9 133 -

Rated LED Power²(Ta=85°, W)

525mA 700mA


17 24

35 47

52 71

70 94

87 118

105 141

122 -

139 -

STU-M/STU-S Optic

13 17

26 34

39 51

52 69

65 86

78 103

91 120

104 137

116 -

The tables below describe the flux and output power of the available versions. These parameters are necessary in order to guarantee a correct comparison of the luminaire performance. In particular, the luminaire efficiency (expressed in lm/W) must be calculated as the ratio between the output luminous flux of the luminaire and the power absorbed by the input power supply unit. For the sake of completeness the tables also show the data of the nominal flux and power of the used LED.


• Power supply:110÷277V - 50/60Hz.

• LED current: 525/700mA.

• Power Factor: >0.9 (at full load).

• Connection for cables featured by a maximum cross section of 4mmq.

• Optional fuse

• Optical unit lifetime525mA:>70.000hr B20L80(included critical failures);>90.000hr L80, TM-21;700mA:>50.000hr B20L80(included critical failures);>70.000hr L80, TM-21.

• Available dimming options:DA: automatic dimming.DAC: customizable DAprofile.PLM: power linecommunication light fluxadjustment.

Installation rep.L/H

ITALO 2 URBAN ITALO 2 URBAN ITALO 2 URBAN

H

L1.5 STW

H

L1.25 STW

STU-M STW

H

L1 STE-M STU-M

H

L0.75 STE-S STU-S

STU-S STE-M

H

L0.5

UNI EN 13201Lighting categories

CEO

ME1

CE1

ME2

CE2

ME3

CE3

ME4

CE4

ME5

CE5

ME6

CE6

S1 S2 S3 S4 S5 S6

MEW 1

MEW 2

MEW 3

MEW 4

MEW 5

Street Application Cycle path ApplicationStreet Application

WET Class

SELECTION OF THE OPTICS ACCORDING TO UNI EN 13201 LIGHTING CATEGORIES

582 mm | 22 7/8”

470 mm

| 18 1/2”

Ø 60 | 2 3/8”

582 mm | 22 7/8”

526 mm

| 22 3/4”

685 mm | 27”

121 mm

| 4 3/4”

542 | 21 3/8” mm

526 mm

| 22 3/4”

542 mm | 21 3/8” mm

264 mm

| 10 3/8” mm

542 mm | 21 3/8” mm

526 mm

| 22 3/4”

Ø 6-12 mm

542 mm | 21 3/8” mm

302 mm

| 22 7/8”

Ø 60 mm | 2 3/8”76 mm | 3” optionalØ

582 mm | 22 7/8”

470 mm

| 18 1/2”

Ø 60 | 2 3/8”

582 mm | 22 7/8”

526 mm

| 22 3/4”

685 mm | 27”

121 mm

| 4 3/4”

542 | 21 3/8” mm

526 mm

| 22 3/4”

542 mm | 21 3/8” mm

264 mm

| 10 3/8” mm

542 mm | 21 3/8” mm

526 mm

| 22 3/4”

Ø 6-12 mm

542 mm | 21 3/8” mm

302 mm

| 22 7/8”

Ø 60 mm | 2 3/8”76 mm | 3” optionalØ

582 mm | 22 7/8”

470 mm

| 18 1/2”

Ø 60 | 2 3/8”

582 mm | 22 7/8”

526 mm

| 22 3/4”

685 mm | 27”

121 mm

| 4 3/4”

542 | 21 3/8” mm

526 mm

| 22 3/4”

542 mm | 21 3/8” mm

264 mm

| 10 3/8” mm

542 mm | 21 3/8” mm

526 mm

| 22 3/4”

Ø 6-12 mm

542 mm | 21 3/8” mm

302 mm

| 22 7/8”

Ø 60 mm | 2 3/8”76 mm | 3” optionalØ

ITALO URBAN 2 MAIN CHARACTERISTICS

Applications: Street and urban lighting.

Optic:STE-M/S: Asymmetrical optic for street lighting - subur-ban application (0F).STU-M/S: Asymmetrical optic for street and cycle path lighting - urban application (0F2H1).STW: Asymmetrical optic for wide roads and wet asphalts (0F).Colour temperature: 4000K (optional 3000K).CRI > 70.Photobiological safety class: EXEMPT GROUP.CIE Photometrical classification: Semi cut-off.IES Photometrical classification: Full cut-off.LED source efficiency: 130lm/W @ 700mA, Tj=85°C, 4000K.

Insulation class: II (I optional).

Protection degree: IP66.Impact protection: IK 08.

LED modules: removable

Tilt angle: Post-top: 0°, +5°, +10°, +15°, +20°. Bracket: 0°, -5°, -10°, -15°, -20°.

Weight: 11,5 kg

Exposed surface: Side: 0.06m2. | Top: 0.25m2.

Mounting: Bracket or Post-top Ø33mm ÷ Ø60mm. | Ø60mm ÷ Ø76mm (optional).

Gear tray: Removable plate

Main reference standards: EN 60598-1, EN 60598-2-3, EN 62471, EN 55015, EN 61547, EN 61000-3-2, EN 61000-3-3.

Italo urban 2LED LIGHTINGmodel Italo Urban19

Note: The characteristics of the product listed above are subjected to change. They will have to be confirmed in case of order. Values indicated in this technical sheet are to be considered rated values subject to a toler-ance of +/-5%.

Data listed above are subject to change without notice.1: Rated data obtained in laboratory.2: Rated data extrapolated from LED manufacturer datasheet.

18

mountings

Luminaire Flux¹(Ta=25°, 4000K, lm)

modules525mA 700mA


1 1400 1840

2 2940 3690

3 4410 5540

4 5870 7370

LED S Optic

10 1630 2050

20 3270 4110

30 4810 6070

Rated LED Flux²(Ta=25°, 4000K, lm)

525mA 700mA


1814 2239

3628 4478

5442 6717

7256 8956

STU-M/STU-S/SV Optic

2010 2550

4020 5100

6030 7650

Rated Luminaire Power¹(Ta=25°, VIN=230 Vac, W)³

modules525mA 700mA


1 14 20

2 30 40

3 45 59

4 59 79

LED S Optic

10 18 22

20 35 45

30 53 69

Rated LED Power²(Ta=25°, 4000K, lm)

525mA 700mA


13 17

26 34

39 51

52 69

S Optic

14 20

29 39

43 59

The tables below describe the flux and output power of the available versions. These parameters are nec-essary in order to guarantee a correct comparison of the luminaire performance. In particular, the lumi-naire efficiency (expressed in lm/W) must be calculated as the ratio between the output luminous flux of the luminaire and the power absorbed by the input power supply unit. For the sake of completeness the tables also show the data of the nominal flux and power of the used LED.


• Power supply:110÷277V - 50/60Hz.

• LED current: 525/700mA.

• Power Factor: >0.9 (at full load).

• Connection for cables featured by a maximum cross section of 4mmq.

• Optional fuse

• Optical unit lifetime525mA:>70.000hr B20L80(included critical failures);>90.000hr L80, TM-21;700mA:>50.000hr B20L80(included critical failures);>70.000hr L80, TM-21.

• Available dimming options:DA: automatic dimming.DAC: customizable DAprofile.PLM: power linecommunication light fluxadjustment.

Installation rep.L/H

H

L1.25

STU-M

S

H

L1 STU-M

STU-M

S

H

L0.75 STU-S

STU-S

S

H

L0.5

STU-S

S

UNI EN 13201Lighting categories

CEO

ME1

CE

1

ME2

CE

2

ME3

CE

3

ME4

CE4

ME5

CE

5

ME6

CE

6

S1 S2 S3 S4 S5 S6

MEW 1

MEW 2

MEW 3

MEW 4

MEW 5

Street Application Cycle path ApplicationStreet Application

WET Class

SELECTION OF THE OPTICS ACCORDING TO UNI EN 13201 LIGHTING CATEGORIES

ITALO 2 URBAN TP ITALO 2 URBAN TP

582 mm | 22 7/8”

470 mm

| 18 1/2”

Ø 60 | 2 3/8”

582 mm | 22 7/8”

526 mm

| 22 3/4”

685 mm | 27”

121 mm

| 4 3/4”

542 | 21 3/8” mm

526 mm

| 22 3/4”

542 mm | 21 3/8” mm

264 mm

| 10 3/8” mm

542 mm | 21 3/8” mm

526 mm

| 22 3/4”

Ø 6-12 mm

542 mm | 21 3/8” mm

302 mm

| 22 7/8”

Ø 60 mm | 2 3/8”76 mm | 3” optionalØ

582 mm | 22 7/8”

470 mm

| 18 1/2”

Ø 60 | 2 3/8”

582 mm | 22 7/8”526 m

m | 22 3/4”

685 mm | 27”

121 mm

| 4 3/4”

542 | 21 3/8” mm

526 mm

| 22 3/4”

542 mm | 21 3/8” mm264 m

m | 10 3/8” m

m

542 mm | 21 3/8” mm

526 mm

| 22 3/4”

Ø 6-12 mm

542 mm | 21 3/8” mm

302 mm

| 22 7/8”

Ø 60 mm | 2 3/8”76 mm | 3” optionalØ

ITALO URBAN TP MAIN CHARACTERISTICS

Applications: Street and urban lighting.

Optic: STU-M/S: Asymmetrical optic for street and cycle path lighting - urban application (0F2H1).S: roto-symmetrical optic for parking and urban areas lighting (0H).Colour temperature: 4000K (optional 3000K).CRI > 70.Photobiological safety class: EXEMPT GROUP.CIE Photometrical classification: Semi cut-off.IES Photometrical classification: Full cut-off.LED source efficiency: 130lm/W @ 700mA, Tj=85°C, 4000K.

Insulation class: II (I optional).

Protection degree: IP66.Impact protection: IK 08.

LED modules: removable

Tilt angle: Post-top: 0°, +5°, +10°, +15°, +20°. Bracket: 0°, -5°, -10°, -15°, -20°.

Weight: 12 kg

Exposed surface: Side: 0.06m2. | Top: 0.25m2.

Mounting: Post-top Ø60mm

Gear tray: Removable plate

Main reference standards: EN 60598-1, EN 60598-2-3, EN 62471, EN 55015, EN 61547, EN 61000-3-2, EN 61000-3-3.

Italo urban TPLED LIGHTINGmodel Italo Urban2120

Note: The characteristics of the product listed above are subjected to change. They will have to be confirmed in case of order. Values indicated in this technical sheet are to be considered rated values subject to a toler-ance of +/-5%.

Data listed above are subject to change without notice.1: Rated data obtained in laboratory.2: Rated data extrapolated from LED manufacturer datasheet.

0

5

10

15

20

1

2

3

4

5

6

7

[m] [ft]

0

5

10

15

1

2

3

4

5

[m] [ft]6

0

5

10

15

20

[ft]

1

2

3

4

5

6

7

[m]

0

5

10

15

[ft]

1

2

3

4

5

6[m]

LED LIGHTINGmodel Italo Urban

MOUNTINGS

2524

Colour: BlackCode: BKT

Colour: GrayCode: GYT

Colour: WhiteCode: WHT

Colour: YellowCode: YLT

Colour: RedCode: RDT

Colour: BlueCode: BUT

Colour: TealCode: TET

Colour: SilverCode: SLT

Colour: GreenCode: GNT

...and much more is available

LED LIGHTINGmodel Italo Urban

Colours

Italo Urban is available in a range of standard and non-standard colors.

DDL8 - 8 step powder-coat processwith phosphochromate dipping resistant to corrosive and saline environments

Stage 1 Alk Clean

Stage 2 Rinse

Stage 3 Rinse

Stage 4 Chrome Phos

Stage 5 Rinse

Stage 6 Seal

Stage 7 Recirc DI

Stage 8 Fresh DI

Aluminum, like many non-ferrous and plas-tic substrates, requires a mild microscopic surface etch prior to coating to promote im-proved adhesion. This can be accomplished simply and safely, with the right chemistry additives in your pretreatment chemistry. The industry standard chemistries used to micro-scopically etch aluminum have been primari-ly acids such as Phosphoric, Sulfuric or Chro-mic acids, many times used in combination, somewhere in the pretreatment process with a fluoride containing additive to promote the etch. Sigma uses the highest standard chem-icals enviro-friendly to achieve the best pos-sible results.

The Seal is many times the last process ap-plied prior to a low conductivity, Deionized, Distilled or Reverse Osmosis conditioned wa-ter rinse. The purpose of the Seal process is to completely passivate and seal any micro-scopic voids on the surface from the environ-ment prior to coating. This helps to addition-ally improve adhesion and inhibit corrosion. The Seal process can be accomplished in many ways with today’s technological ad-vancements. In some of the latest pretreat-ment technologies, the seal and passivation steps are accomplished in a single step during the conversion coating application process. Tri-valent chrome (which is thought to be a safe alternative to the hexavalent chrome), non-chromic seal such as molybdate and other organic, inorganic and nano-polymer products are used depending on an applica-tion.

2726

AEC LIGHTING 2455 Dixie Rd.Mississauga - ON L4Y 2A1Canada

Web: www.aeclighting.comTEL +1647 247 1680

28

© 2008-2009 Sigma-Lux Group Corp. Not to be reproduced wholly or in part without written permission.

italo urban brochure 29-01-2014 small

Documents