iou series manual - green furniture conceptgreenfc.com/sites/default/files/iou_manual_2.pdf · iou...

IOU SeriesManual

Index

p3-5

p6

p7-10

p11-13

p14-16

Product description

Recycling

Assembly instructions|IOU Back

Assembly instructions|IOU Bench

Maintenance & Repair

IOU Series Green Furniture Concept3

Ribs

Metal legs

Metal strip

Metal legsMetal strip

Ribs

IOU Back module

IOU Bench module

Product descriptionParts


IOU Back can be made to any curvature between 0-45 degrees, both concave and convex. Stand-ard modules are straight and convex /concave 45 degrees.

By opening the drawbolt catch the bench modules can be easily moved for annual cleaning or for reconfiguration.

Product descriptionApperance

The bench modules are snapped together and locked with a draw-bolt catch.


IOU ribs

The ribs are treated with hard wax oil which gives surface protection and color. Standard or custom colors can be chosen as well as color mixes. Special fire retardant treatment can be added.

The ribs are made of beech or maple veneer with a surface veneer of oak or other wood of choice. The table tops are made of massive beech, oak or other wood of choice.

Product descriptionApperance


Glides are made of PE and are sorted as plastic.

Recycling

The ribs are made of wood and are sorted as combustible.

Legs, strips, and small parts are madeof steel and are sorted as metal.


IOU Back Leg x2 IOU Back rib x17 IOU Seat rib x17

IOU Glides x4

Drawbolt Catch x1

IOU Back metal strip x2

Bolt A x20

Screw B x12

Screw A x90

Note: If you have a curved bench you will have two back metal strips in different lenght.

Note: Due to that the assembly of this bench mostly is done with the ribs upside down we recommend you to use a blanket or similar to prevent damage to the ribs and metal parts.

Assembly instructionsIOU Back

IOU Seat metal strip x2

Note: If you have a curved bench you will have two seat metal strips in different lenght.

Bolt B x8

Nut A x8


Use bolt A to attach glides to the legs.

Use screw A to attach seat metal strips to theseat ribs. Do not attach the outermost rib on each side.



.


2b 2c

3a 3b

1 2a

Use screw A to attach back metal strips to theback ribs. Do not attach the outermost rib on each side.



Use bolt A to attach the back to the legs. Do not attach bolts in the center holes, use the upper and lower holes on each metal strip.

Use bolt B and nut A to attach the seat to thelegs. Use the wider holes and make sure that

Use screw B to attach the last back ribs.


5 6

8a

3c 4


nut A is mounted from the bottom.

Use screw B to attach the last seat ribs.

7

Use bolt A to attach drawbolt catch. Attach thelock in the inner holes. When buildning a series of benches make sure to put each lock on the same side of the benches.


Assembly instructionsIOU Bench

8b 9

Use the drawbolt catch to snap the benches together.

Use bolt A to attach drawbolt catch. Attach thehook in the outer holes. When buildning a series of benches make sure to put each lock on the same side of the benches.


IOU Bench Leg x2 IOU Seat rib x17 IOU Glides x4

Drawbolt Catch x1

Note: If you have a curved bench you will have two seat metal strips in different lenght.

Note: Due to that the assembly of this bench mostly is done with the ribs upside down we recommend you to use a blanket or similar to prevent damage to the ribs and metal parts.


IOU Seat metal strip x2

Bolt A x12

Screw B x8

Screw A x60

Bolt B x8

Nut A x8


Use bolt A to attach glides to the legs.


2b 2c

3 4

1 2a




Use bolt B and nut A to attach the seat to thelegs. Use the wider holes and make sure that nut A is mounted from the bottom. Use screw B to attach the last seat ribs.



5a

Use the drawbolt catch to snap the benches together.

6

5b

Use bolt A to attach drawbolt catch. Attach thelock in the inner holes. When buildning a series of benches make sure to put each lock on the same side of the benches.

Use bolt A to attach drawbolt catch. Attach thehook in the outer holes. When buildning a series of benches make sure to put each lock on the same side of the benches.


Background

The IOU Series wooden ribs are treated with hardwax Rubio Monocoat Oil Plus 2C, a maintenance series that is environmentally sound. We recommend that you use the Rubio Monocoats (Rubio) products for oiling to cleaning and maintenance, as these products are environmentally friendly and designed to be compatible at each stage.

Weekly cleaning

First cleaning can be done within six days after the original treatment. 1 Brush ribs from dirt and dust. 2 Immerse a cotton cloth or microfiber towel in a solution of Rubio Monocoat Soap. (Mixing ratio: 150ml RMC Soap per 10 liters of water. Wring out to semi-wet cloth) 3 Wipe 2-4 square meters of ribs. 4 Rinse the cloth in the bucket with clean water and wring out thoroughly.

Cleaning with RMC Soap helps to preserve the surface protection and helps to keep the matte surface

Maintenance/Repair


Note The product may NOT be diluted!Cloths, saturated with oil, may spontaneously combust. After usage, they need to be soaked in water before disposal.

1: Dark Oak rib 2: Scratched Dark Oak rib 3: Clean area with sandpaper or cloth

4: 5: Spread out a small quantity ofthe mix with a cloth. 6: Let the oil absorb during a few minutes.

7: Remove all excess oil with a dry cloth. 8: Treated Dark Oak rib. Let dry for at least 12h.

Touch up / Maintenance

Scratches can be touched up by local treatment with Rubio Monocoat Oil Plus 2C, with color according to the original treatment, giving no joints, making the damage less visible and gives the injured surface back it’s surface protection. Maintenance cycle depends on rate of use/wear.

Maintenance/Repair


Tightening the screws

Depending on humidity, screws and bolts may need to be tightened 3-6 months after delivery, otherwise the construction may become loose (applies to all wooden structures). Check the screws and bolts once a year.

Replace rib

If for any reason you need to change any of your ribs, it's easy to do.

Unscrew the four screws that belongs to the damaged rib or ribs.

Add the new rib or ribs. Screw the new rib or ribs in place.

Remove the damaged rib or ribs.

Maintenance/Repair

1 2

3 4

greenfc.com

iou series manual - green furniture conceptgreenfc.com/sites/default/files/iou_manual_2.pdf · iou...

Documents