inflating padding antifracture girdle et 493-01 senior project design fall 2014 stephen t. calvert...
TRANSCRIPT
Inflating Padding Antifracture GirdleET 493-01 Senior Project Design Fall 2014
Stephen T. Calvert
Advisor
Dr. Patrick McDowell
Trochanteric(hip) PaddingMust be capable of covering • Shoulders.• Sides.most importantly • Hips
A shirt/coat would best cover all areas
Mostly handy-work, this has been contracted out.
Cartridge* & TriggerFor the purpose of inflating the Airbags in the garment. This device must maintain a reservoir of pressurized gas. This would either be filled every so often, or provided with cartridges.
One design employs a 12g CO2 cartridge
Alternate design creates reservoir of air.
Fall detection components
Arduino microcontroller.
• LCD keypad shield
• Accelerometer
• Ultrasonic Rangefinder
• Wires-etc.
Construction of fall detecting mechanism• First sewing the sensors onto strips of
fabric• Pinning Sensors onto vest• One range finder under front left pocket• Second Range finder on back with
accelerometer and microcontroller• Tools for work
Tasks Obtain appropriate sensors(accelerometers, gyros, etc.)(done)
Build experimental setup for fall detector.(done)
Test fall detector, modify as necessary(progress)
Determine appropriate trigger mechanism(purchase if modifiable version is available)(progress)
Test and modify
Build girdle with CO2 bladders(accounted for)
Assemble all parts
Test prototype
Make modifications as necessary
Write up on device
Schedule
October November December January February March April MaySelect remaining components
Build experimental setup
Assemble the fall detector
Write fall detection code
Add trigger to device
Add Girdle
Final modifications
Current time