how to setup scan to folder on hp
TRANSCRIPT
HOW TO SETUP SCAN TO FOLDER ON HP LJ 9050 MFP
STEP 1: Go to your web browser and type the IP address of the copier/printer.
(157.87.65.17) or just click this link
https://157.87.65.17/hp/device/this.LCDispatcher
Note: If this message appear just click “Proceed Anyway”
STEP 2: Click Digital Sending
STEP 3: On Digital Sending click “Send to Folder Settings”.
STEP 4: On Send to folder setting click “Receiving Copier” then “Edit”.
1
2
STEP 5: On the “QUICK SET MEMBERS”click “Receiving Copier” then
“Edit”
1
2
STEP 6: Change the Username and Password, make
sure that the user have an access on,
Then click “Test Folder Access”
If the User don’t have enough access to this destination path:
Just try another username and password.
Note: Don’t forget to click “OK” after verifying folder access.
STEP 7: Change the Username and Password, then apply.(same as the username and password that has been verified
earlier)
NOTE: Don’t forget to click “APPLY”
STEP 8: You can now try the Scan to Folder on your machine.