Before You Scan

ZYTOcompass.com

A guide for setting up your tablet and Compass system

Congratulations on your ZYTO Compass purchase! Included in your shipment:

(1) ZYTO Hand Cradle with USB cable (1) NuVision tablet

(1) Micro-USB on-the-go (OTG) cable (1) USB cable and wall charger

Setting up Internet connection

1. Tap or click the Wi-Fi icon in the taskbar. If you do not see it, you might have to tap the up arrow to make it visible.

2. Tap or click the desired Wi-Fi net work and tap or click the Connect button. You can also check the box that says “Connect automatically” if you don’t want to manually reconnect next time.

3. Enter the Wi-Fi password and tap or click Next.

That’s it! You are now ready to set up Windows 10 and install the software!

Setting up Windows 10

1. When you first turn the tablet on, you will notice that it looks slightly different than a typical Windows 10 operating system.

2. The first recommended step will be to turn “Tablet Mode” off. Swipe the screen from left to right, which will pull up a side menu bar. Once you tap on the “Tablet Mode” tile, the desktop will start looking more familiar.

3. Next, it’s important to run a Windows Update. To do so,click or tap on the Windows logo on the bottom left-hand side, then click on “Settings”. (It will have an icon of a gear next to it.)

4. Click or tap on “Update & Security”.

Setting up Windows 10 continued

5. Click or tap on “Check for updates”.

6. Windows will automatically check for updates and install them. Once the updates are installed, click or tap “Restart Now”. (You may need to scroll down in order to see this.)

Now you‘re ready to install the ZYTO Compass software!

Installing the ZYTO Compass Software

1. Go to ZYTOcompass.com/install and click or tap on “Download”.

2. Click or tap on “Install”.

3. Once the initial installation process is complete, the software will ask you to log in using your email and password. Note: You may not see the cursor, but it will show up as you type.

Installing the ZYTO Compass Software continued

4. Once you log in, the software will go through the installation and ask you to accept the terms and conditions. Click “Accept” to proceed.

5. Next, install the Hand Cradle drivers. At this time, be sure you do not have the cradle plugged in before clicking “Next”.

6. The software will prompt you to plug in the Hand Cradle. Be sure to use the USB cable that came in the Hard Cradle box. Plug the cable into the USB port on the side of the key board.

Installing the ZYTO Compass Software continued

7. If you do not have the keyboard on hand, you may also use the OTG cable and plug the Hand Cradle into the side of the tablet.

*Note: The software will not recognize the Hand Cradle if you use the long white micro USB cable.

8. Lastly, install Adobe Reader X. You will be prompted for permission to proceed. Click “Yes” and the installation will begin.

When you see the screen that has the “New Client”, “Returning Client”, and “Administrative Setting” options, your setup is complete!

If you have any questions or would like assistance setting up your tablet or software, please call our Technical Support Department at +1 801-919-3813, option 3.