hiniker row cultivator series 6000 index new/manuals/parts...page i series 6000 row cultivator 11/10...

Page I

SERIES 6000 ROW CULTIVATOR

11/10

PART NUMBER 81004224 Rev. E

HINIKERROW CULTIVATOR

SERIES 6000INDEX

SERIAL NUMBER ENDING 100 OR HIGHER

SECTION 1 RIGID SERIES ROW CULTIVATORSECTION 2 FOLDING SERIES ROW CULTIVATORSECTION 3 HYDRAULICSSECTION 4 COMPONENT PARTS BREAKDOWNSECTION 5 OPTIONAL EQUIPMENT

It is the policy of Hiniker Company to constantly improve its products whenever it is practical to do so.

Hiniker Company must therefore reserve the right to redesign or change its equipment or component parts thereof without incurring the obligation to install or furnish such changes on the equipment previously delivered.

INSTRUCTIONS FOR ORDERING PARTS

1. The item numbers in the illustrations corre-spond to the same item numbers in the de-scription list. An assembly having a part number can be ordered. All other parts must be ordered individually. The quantity in the “number required” column is the number of parts used in this area of the machine. The term “A/R” for number required indicates “as required” where the quantity may vary. Or-der all parts by their number and name. Do not use the item number.

2. All references to left and right, front and rear apply to the machine as viewed from the rear of the machine, facing forward in the direction of travel.

3. Always mention the identification number of the model and serial numbers found on the name plate of the unit on which the part is to be used. Much delay and confusion can be avoided when correct numbers are specified on parts order and correspondence.

4. Owners, order all parts through your local dealer.

PARTS

5. Dealers must indicate how to ship.

6. Collect phone calls are not accepted.

7. Address parts orders as follows:

HINIKER COMPANY58766 240th St.P.O. BOX 3407

MANKATO, MN 56002-3407 USAPhone (800) 433-5620

Fax (800) 637-3991

INSTRUCTIONS FOR RETURNING PARTS FOR ADJUSTMENT

1. To assure prompt handling of claims, your dealer or distributor should follow standard claim procedure and forward claims within thirty (30) days of any part failure or mal-function believed to be a warranty claim, to Hiniker Company claims department for processing.

2. No returned part will be accepted unless they are transportation prepaid and accompa-nied by the packing list copy of the returned goods authorization form, or the packing list copy of the warranty claim form.

3. Parts returned should have a tag attached with sender’s name and address clearly printed.

Part Number 81004224 Rev. E November 2010 Parts Books/Hiniker/81004224RevE


11/10

SEC

1

SECTION 1RIGID SERIES

ROW CULTIVATOR

PAGE 2 RIGID TOOLBAR 4 ROW 30, 36/38 INCH SERIES 6000 6 ROW 30 6 ROW 36/38 INCH RIGID 6 ROW 40 INCH 8 ROW 30 INCH RIGID 8 ROW 36/38 INCH RIGID 8 ROW 36/40 INCH RIGID (3/8” WALL TOOLBAR) 10 ROW 30 INCH RIGID (3/8” WALL TOOLBAR)


11/10

RIGID TOOLBAR4 ROW 36138, 6 ROW 30, 6 ROW 36/38/40

8 ROW 30, 8 ROW 36/38140

DWG. NO. 3011

SEC

1

REF.NO.

PARTNUMBER DESCRIPTION QTY. REF.

NO.PART

NUMBER DESCRIPTION QTY.

12

345

6

7

8

9

875-001-038810-002-234810-002-235810-002-236810-002-237810-002-23881004338952-001-006951-001-009810-002-080

810-002-079

810-002-085

810-001-920

810-001-284

U-Bolt 3/4Toolbar (170”) (4/36-38)Toolbar (198”) (6/30)Toolbar (246”) (6/36-38)Toolbar (258”) (8/30) 6/40)Toolbar (322”) (8/36-38)Toolbar (338”) 3/8 Wall (8/36-38-40) (10-30)Lock Washer 3/4 InchHex Nut 3/4-10RH Lower Hitch Assy (Includes Items 1, 3 & 4) (See Sect. 4 Pg. 7)LH Lower Hitch Assy (Includes Items 1, 3 & 4) (See Sect. 4 Pg. 7)Upper Hitch Assy (Includes Items 1, 3 & 4)(See Sect. 4 Pg. 7)Parking Stand Assy (Includes Items 1, 3 & 4)(See Sect. 4 Pg. 6)End Plate

1011111

2020

2

2

10111213141516171819202122232425

810-001-475950-002-006951-002-002950-001-003952-001-001951-001-003850-001-354815-001-004850-001-305810-001-473850-001-285850-002-42681004129810041368100418681004181

Block Removing RodWhiz Lock Bolt 5/16 x 3/4Whiz Lock Nut 5/16-18Hex Bolt 1/4-20 x 1Lock Washer 1/4 InchHex Nut 1/4-20SMV SignSMV Mount StrapTape Reflector (Red)Notice DecalTape Reflector (Yellow)Caution Decal6000 DecalHiniker DecalSpacer StrapDecal Bag (Includes Items 18, 19, 20, 21, 22 & 23)

188222112121222


11/10

SEC

2

PAGE 2-3 FOLDING TOOLBAR SERIAL NO. ENDING 100 8 ROW 30PAGE 4-5 FOLDING TOOLBAR SERIAL NO. ENDING 101 OR HIGHER 8 ROW 30PAGE 6-7 FOLDING TOOLBAR SERIAL NO. ENDING 100 8 ROW 36-38 12 ROW 30PAGE 8-9 FOLDING TOOLBAR SERIAL NO. ENDING 101 OR HIGHER 8 ROW 36-38-40 10 ROW 30 12 ROW 30PAGE 10-11 FOLDING TOOLBAR SERIAL NO. ENDING 100 OR HIGHER 12 ROW 36-38 12 ROW 40 16 ROW 30 18 ROW 28

SECTION 2FOLDING SERIESROW CULTIVATOR


11/10

FOLDING TOOLBAR ASSEMBLYSERIAL NO. ENDING 100

8 ROW 30

DWG. NO. 2892

SEC

2


11/10

REF.NO.


NO.PART


12345

6789

1011121314151617181920212223242526272829

810-002-337810-002-351810-002-352810-002-164810-002-085

81002580815-001-004850-001-354875-001-038850-002-426950-001-181850-001-980850-001-30581004136850-001-306850-001-285810-002-157810-002-15681002674845-001-150810-001-255953-003-01781002675810-002-155850-001-200953-003-023953-005-002953-003-002810-002-485

Center Frame WeldmentLH Wing WeldmentRH Wing WeldmentStand WeldmentUpper Hitch Assembly (Includes Items 9, 36 & 37) (See Sec. 4 Pg. 7)3 1/2 x 16 Dia. Cylinder SAE (See Sec. 3 Pg. 3)SMV Mount StrapSMV Sign3/4 U-BoltCaution DecalHex Head Cap Screw 5/8-11 x 8 1/2 Gr. 5Warning DecalTape Reflector (Red)Hiniker DecalWarning DecalTape Reflector (Yellow)LH Link WeldmentRH Link WeldmentTubeSpacerRollerSpring Pin 5/16 x 2Link PinHinge PinHinge PinSpring Pin 5/16 x 3Hair Pin Cotter .178 x 3 9/16Spring Pin 1/2 x 2 1/2Lower Hitch Pin

11121

211612422222244442222222

3031323334353637383940414243444546

47484950

5152535455

230-026-005810-002-284810-001-511955-001-001951-001-022850-002-503951-001-009952-001-006950-001-031951-005-052805-001-784950-002-006951-002-002950-001-003951-001-003952-001-001810-001-920

810-001-473953-003-028951-001-008952-001-00581004182

8100418681004129701-3000481003138953-003-008

Klik PinEnd CoverBlock Removing Road Short (8 Row 30 Fold)Grease FittingHex Nut 1-1/4Eye Bolt 1-1/4Hex Nut 3/4-10Lock Washer 3/4 InchHex Head Cap Screw 3/4-10 x 3 Gr. 5Jam Nut 3/4-1030° Bulkhead PlateWhiz Lock Bolt 5/16 x 3/4Whiz Lock Nut 5/16Hex Head Cap Screw 1/4-20 x 1Hex Nut 1/4-20Lock Washer 1/4 InchParking Stand Assembly (Includes Items 9, 36& 37) (See Sec. 4 Pg. 6)Notice DecalSpring Pin 1/2 x 2 3/4Hex Nut 5/8-11Lock Washer 5/8Decal Bag (Includes Items 10, 12, 13, 14, 15, 16, 47 & 52)Spacer Straps6000 DecalSpring Pin 3/16 x 2 1/4RollerSpring Pin 5/16 x 2 1/4

221242

1212441182222

12

1010

22244

SEC

2


11/10

FOLDING TOOLBAR ASSEMBLYSERIAL NO. ENDING 101 OR HIGHER

8 ROW 30

DWG. NO. 3006

SEC

2


11/10

REF.NO.


NO.PART


123456789

101112131415161718192021222324252627282930313233

810-001-284810-001-47581002580952-001-00781004234810042358100423681004406953-003-00281004351810044828100448181004436810044378100429681004297810042988100430081004301953-003-0098100440081004394953-003-030952-001-005950-001-185950-002-006950-003-009951-001-005951-001-008955-001-001951-002-0028100425181004287

End PlateBlock Removing RodCylinder Assembly 3 1/2 x 16 (See Sec. 3 Pg. 3)Lock Washer 3/8 InchPinRubber CushionStand ShimHinge PinSpring Pin 1/2 x 2 1/2BushingTop Link PinLinch PinRollerPinStopShimLift LinkLower Hitch PinClinch PlnSpring Pin 3/8 x 1 3/4Center Toolbar Weldment 8/30Wing Toolbar Weldment 8/30Spring Pin 1/2 x 3Lock Washer 5/8 InchHex Head Cap Screw 5/8-11 x 2 1/4 Gr. 5Hex Head Flanged Whiz Lock Bolt 5/16-18 x 3/4Carriage Bolt 3/8-16 x 1 3/4 Gr. 2Hex Nut 3/8-16Hex Nut 5/8-11Grease Fitting 1/8-27 NPTFlat Whiz Lock Nut 5/16-18Pivot WeldmentWeight Weldment

212822622211422

1022281246484462822

343536373839

40414243444546474849505152

53545556575859606162

953-003-006951-002-0528100428481003042953-005-001810-001-920

875-001-038952-001-006951-001-009952-001-001951-001-003850-002-4268100412981004136850-001-306850-001-980850-001-285850-001-305810-001-47381004309

81004700701-30022950-001-1088100469781004695850-001-354815-001-004805-001-784805-001-332950-001-003

Spring Pin 1/4 x 1 1/2Jam Nut 3/4-10Latch WeldmentPinHair Pin Cotter .120 x 2 3/8Parking Stand Assembly (Includes Items 40, 41,42) (See Sec. 4 Pg. 6)U-Bolt PlatedLock Washer 3/4 InchHex Nut 3/4-10Lock Washer 1/4 Inch Med Split SAEHex Nut 1/4-20Decal CautionDecal 6000 SeriesDecal HinikerDecal Lift CylinderDecal WarningTape-Yellow ReflectorTape-Red ReflectorDecal NoticeDecal Bag (Includes Items 45, 46, 47, 48, 49, 50, 51 & 52)Tube WeldmentSpring Pin 3/16 x 2Hex Bolt 3/8-16 x 1 1/2Lock Bar WeldmentShimSMV SignSMV Strap30° Bulkhead PlateU-Bolt 5/8Hex Head Cap Screw 1/4-20 x 1 Gr. 2

222222

48822122242211

2242

A/R11112

SEC

2


11/10

FOLDING TOOLBAR ASSEMBLYSERIAL NO. ENDING 1008 ROW/36-38, 12 ROW/30

DWG. NO. 2890

SEC

2


11/10

REF.NO.


NO.PART


1

2

3

4

5

6789

10111213141516171819202122232425262728

810-002-132810-002.338810-002-133810-002-349810-002-134810-002-350810-002-16481004129810-002-085

81004342815-001-004850-001-354875-001-038850-002-426701-30004850-001-980850-001-30581004136850-001-306850-001-285810-002-157810-002-156810-001-473950-001-087810-001-255953-003-01781002603810-002-155850-001-200953-003-023953-005-002953-003-002

Center Frame Weldment (12/30)Center Frame Weldment (8/36-38)LH Wing Weldment (12/30)LH Wing Weldment (8/36-38)RH Wing Weldment (12/30)RH Wing Weldment (8/36-38)Stand Weldment 12/30Stand Weldment 8/36-38Upper Hitch Assembly (Includes Items 9, 37 & 37) (See Sec. 4 Pg. 7)4 x16 Diameter Cylinder SAE (See Sec. 3 Pg. 4)SMV Mount StrapSMV Sign3/4 U-BoltCaution DecalSpring Pin 3/16 x 2 1/4Warning DecalTape Reflector (Red)Hiniker DecalWarning DecalTape Reflector (Yellow)LH Link WeldmentRH Link WeldmentNotice DecalHex Head Cap Screw 5/8 x 1 1/2 (8 Row 36 Only)RollerSpring Pin 5/16 x 2Link PinHinge PinHinge PinSpring Pin 5/16 x 3Hair Pin Cotter .178 x 3 9/16Spring Pin 1/2 x 2 1/2

111111221

21161442222221844222222

293031323334353637383940

41424344454647484950515253

5455565758

810-002-485230-026-005810-001-284810-001-475955-001-001951-001-022850-002-503951-001-009952-001-006950-001-031951-005-052810-001-920

950-002-006951-002-002950-001-003951-001-003952-001-001805-001-332952-001-005951-001-00881003138953-003-008953-003-028810041868100412981004182

950-001-181805-001-784845-001-15081002674810-002-371

Lower Hitch PinKlik PinEnd CoverBlock Removing RodGrease FittingHex Nut 1 1/4Eye Bolt 1 1/4Hex Nut 3/4-10Lock Washer 3/4 InchHex Bolt 3/4-10 x 3Jam Nut 3/4-10Parking Stand Assembly (Includes Items 9, 36 & 37) (See Sec. 4 Pg. 6)Hex Head Flanged Whiz Lock Bolt 5/16 x 3/4Whiz Lock Nut 5/16Hex Head Cap Screw 1/4-20 x 1Hex Nut 1/4Lock Washer 1/4 InchU-Bolt 5/8Lock Washer 5/8 InchHex Nut 5/8RollerSpring Pin 5/16 x 2 1/4Spring Pin 1/2 x 2 3/4Spacer Straps6000 DecalDecal Bag (Includes Items 10, 12, 13, 14, 15, 16, 19 & 53)Hex Head Cap Screw 5/8-11 x 8 1/2 Gr. 530° Bulkhead PlateSpacerTubeSpacer Plate (8 Row 36 Only)

2221242

1212442

B8222488442221

21444

SEC

2


11/10


8 ROW 36-38-40,10 ROW 30, 12 ROW 30

DWG. NO. 3010

SEC

2


11/10

REF.NO.


NO.PART


123456789

101112131415161718192021

22

232425262728293031

810-001-284810-001-47581004342952-001-00781004234810042358100423661004406952-001-0058100448181004482953-003-00281004289810042908100429681004297810042988100430081004301953-003-00981004401810044028100439381004392953-003-030951-002-002950-001-185950-002-006950-003-009951-001-005951-001-008955-001-00181004251

End PlateBlock Removing RodCylinder Assembly 4 x 16 (Sec 3 Page 5)Lock Washer 3/8 Inch Medium Split SAEPinRubber CushionStand ShimHinge PinLock Washer 5/8 Inch Medium Split SAELinch PinTop Link PinSpring Pin 1/2 x 2-1/2RollerPinStopShimLift LinkLower Hitch PinClinch PinSpring Pin 3/8 x 1-3/4Center Toolbar Weldment 8/36-38-40Center Toolbar Weldment 12/30Wing Toolbar Weldment 8/36-38-40Wing Toolbar Weldment 12/30Spring Pin 1/2 x 3Flanged Whiz Lock Nut 5/16-18Hex Head Cap Screw 5/18-11 x 2 1/4 Gr. 5Hex Head Flanged Whiz Lock Bolt 5/16-18Carriage Bolt 3/8-16 x 1-3/4 Gr. 2Hex Nut 3/8-16Hex Nut 5/8-11Grease Fitting 1/8-27 NPTPivot Weldment

212822626112422

1022281122484844622

32333435363738

39404142434445464748495051

52535455565758596061

81004702953-003-006951-005-0528100428481003042953-005-001810-001-920

875-001-038952-001-006951-001-009952-001-005951-001-003850-002-4268100412981004136850-001-306850-001-980850-001-285850-001-305810-001-47381004309

850-001-354815-001-004805-001-784805-001-33281004700701-30022950-001-1088100469781004695950-001-003

Weight WeldmentSpring Pin 1/4 x 1-1/2 Jam Nut 3/4-10Latch WeldmentPinHair Pin Cotter .120 x 3 3/8Parking Stand Assembly (Includes Items 39, 40, 41)U-Bolt PlatedLock Washer 3/4 Inch Medium Split SAEHex Nut 3/4-10Lock Washer 1/4 Medium Split SAEHex Nut 1/4-20Decal CautionDecal 6000 SeriesDecal HinikerDecal Lift CylinderDecal WarningTape-Yellow ReflectorTape-Red ReflectorDecal-NoticeDecal Bag (Includes Items 44, 45, 46, 47, 48, 49, 50 & 51)SMV SignSMV Strap30° Bulkhead PlateU-Bolt 5/8Tube WeldmentSpring Pin 3/16 x 2Hex Head Cap Screw 3/8-16 x 1 1/2Lockbar WeldmentShimHex Head Cap Screw 1/4-20 x 1 Gr. 2

2222222

22222122242211

11112242

A/R2

SEC

2


11/10


12 ROW 36/38 & 16 ROW 30, 18 ROW 28

DWG. NO. 3020

SEC

2


11/10

REF.NO.


NO.PART


123

456789

1D

1112131415161718192021

22

2324252627282930313233

810-001-284810-001-4758100258181004872810030428100423481004235810042368100424681004251810042578100430481004284810047028100428981004290810042968100429781004298810043008100430181004302810043068100430581004308810043078100485281004853850-002-503865-001-042950-001-185950-002-006030-16071951-001-005951 001-008951-001-022951-002-002951-005-052952-001-005

End PlateBlock Removing RodCylinder Assembly 5 x 16 (Sec 3 Page 6)Cylinder Assembly 5 x 16 (Sec 3 Page 6)PinPinRubber CushionStand ShimHinge PinPivot WeldmentStrap Weldment (16 Row 30) (18 ROW 28)Strap Weldment (12 Row 36/38)Latch WeldmentWeight WeldmentRollerPinStopShimLift LinkLower Hitch PinClinch PinPinCenter Toolbar Weldment 12/36-38Center Toolbar Weldment 16/30 & 18/28Wing Toolbar Weldment 12/36-38Wing Toolbar Weldment 16/30Left Wing Toolbar Weldment 18/28Right Wing Toolbar Weldment 18/28Eye Bolt 1 1/4-7Control Arm Link PinHex Head Cap Screw 5/8-11 x 2-1/4 Gr. 5Hex Head Flanged Whiz Lock Bolt 5/16-18 x 3/4Carriage Bolt 3/8-16 x 1 3/4 Gr. 5Hex Nut 3/8-16Hex Nut 5/8-11Hex Nut 1 1/4-7Hex Head Flanged Whiz Lock Nut 5/16-18Jam Nut 3/4-10Lock Washer 5/8 Inch

21222226222222422

10222211221122484464826

3435363738394041424344454647484950515253545556575859606162

636465

666768

952-001-007953-003-002953-003-003953-003-006953-003-009953-003-030953-005-001955-001-001850-001-036810-001-4738100413681004129850-002-426805-001-784815-001-004951-001-003952-001-001850-001-354950-001-003810046978100302081004695850-001-285850-001-30581004311875-001-035952-001-006951-001-00981004237

8100448281004481850 001-98081004309

81004700701-30022950-001-108

Lock Washer 3/8 InchSpring Pin 1/2 x 2 1/2Spring Pin 1/4 x 1 3/4Spring Pin 1/4 x 1 1/2Spring Pin 3/8 x 1 3/4Spring Pin 1/2 x 3Hair Pin Cotter .120 x 2 3/8Grease Fitting 1/8-27 NPTWarning DecalNotice DecalHiniker Decal6000 DecalCaution Decal30° Bulk Head PlateSMV Mount StrapHex Nut 1/4-20Lock Washer 1/4 InchSMV SignHex Head Cap Screw 1/4-20 x 1Lockbar WeldmentU-Bolt 5/8ShimTape Yellow ReflectiveTape Red ReflectiveParking Stand Assembly (Sec 4 Page 6)U-Bolt 3/4Lock Washer 3/4 InchHex Nut 3/4-10Upper Hitch Assembly (Includes Items 61, 62 & 63)Top Link Pin Cat IIILinch PinDecal WarningDecal Bag (Includes Items 42, 43, 44, 45,46, 57, 58, 59 & 67)Tube WeldmentSpring Pin 3/16 x 2Hex Bolt 3/8-16 x 1 1/2

8242

124242122111221221

A/R222

A/RA/RA/R

1

114

224

SEC

2


11/10

SECTION 3HYDRAULICS

PAGE 2 HYDRAULIC PLUMBING 170 DEGREE WING LIFT ALL FOLDING MODELS WING LIFT CYLINDERSPAGE 3 PRINCE 3.5 INCH DIA. X 16 INCH STROKEPAGE 4 PRINCE 4.00 INCH DIA. X 16 INCH STROKE P/N AM-111SPPAGE 5 PRINCE 4.00 INCH DIA. X 16 INCH STROKE P/N AR-264PAGE 6 PRINCE 5.00 INCH DIA. X 16 INCH STROKE LIFT ASSIST CYLINDERSPAGE 7 TEXAS HYD. 3.00 INCH DIA. X 8 INCH STROKEPAGE 8 PRINCE 3.00 INCH DIA. X 8 INCH STROKE

SEC

3


11/10

*NOTE: TO HAVE POSITIVE LOCK ON TOOLBAR WING LOCK, AN OPTIONAL NEEDLE VALVE IS OFFERED NO. 81004701. THIS WILL INSURE THE LIFT CYLINDER WILL NOT CLOSE, AND DISENGAGE WING LOCK.

HYDRAULIC PLUMBING 170 DEGREE WING LIFT

REF.NO.


NO.PART


1

23

4

56

7

8

956-004-002

957-002-014956-007-003

81002580

81004342

81004872

956-005-002956-008-024

956-008-025

957-001-009957-001-017

957-001-018

957-001-021

957-001-056

957-001-004957-001-009

Reducer Bushing 1/2 Male NPT to 3/8 Female NPT3/8 Inch Hose Assembly 48 InchesBulkhead Tee 9/16 Male JIC To 9/16 Male JIC To 9/15 Male JIC3.50 Inch Diameter x 16 Inch Stroke Cylinder 8 Row 304.00 Inch Diameter x 16 Inch Stroke Cylinder 8 Row 36-38-40, 10 Row 30, 12 Row 305.00 Inch Diameter x 16 Inch Stroke Cylinder 10 Row 36-38, 12 Row 36-38, 16 Row 30, 18 Row 2890° Elbow 9/16 Female JIC to 9/16 Male JICRestrictor Fitting 3/4 Male SAE O-Ring to 9/16 Male JIC 3.50 & 4.00 CylinderRestrictor Fitting 7/8 Male SAE O-Ring to 9/16 Male JIC 5.00 Cylinder3/8 Inch Hose Assembly 50 Inch 8 Row 303/8 Inch Hose Assembly 72 Inch 8 Row 36-38-403/8 Inch Hose Assembly 79 Inch 10 Row 30,12 Row 303/8 Inch Hose Assembly 102 Inch 10 Row 36-38, 12 Row 36-383/8 Inch Hose Assembly 108 Inch 16 Row 30 & 18 Row 283/8 Inch Hose Assembly 29 inch 8 Row 303/8 Inch Hose Assembly 50 inch 8 Row 36,38,40

2

22

2

2

2

44

4

11

1

1

1

11

8

9

10

1112

957-001-014

957-001-057

957-001-019

957-001-006

957-001-015

957-001-018

957-001-021

957-001-056

957-001-014957-001-057

957-001-020

957-001-054

957-001-023

81004701956-003-022

3/8 Inch Hose Assembly 60 Inch 10 Row 30,12 Row 303/8 Inch Hose Assembly 86 Inch 10 Row 36,38, 12 Row 36, 383/8 inch Hose Assembly 92 inch 16 Row 3018 Row 283/8 Inch Hose Assembly 41 Inch 8 Row 30& Row 283/8 inch Hose Assembly 68 Inch 8 Row 36,38,403/8 Inch Hose Assembly 79 Inch 10 Row 30,12 Row 303/8 Inch Hose Assembly 102 Inch 10 Row 36,38, 12 Row 36, 383/8 Inch Hose Assembly 108 inch 16 Row30 & 18 Row 283/8 Inch Hose Assembly 60 Inch 8 Row 303/8 Inch Hose Assembly 86 Inch 8 Row 36,38,403/8 Inch Hose Assembly 96 Inch 10 Row 30,12 Row 303/8 Inch Hose Assembly 120 Inch 10 Row36, 38, 12 Row 36, 383/8 Inch Hose Assembly 126 Inch 16 Row30 &18 Row 283/8 Needle Valve (Optional)Straight Adapter 3/8 MNPT to 1/2 MNPT(Optional)

1

1

1

1

1

1

1

1

11

1

1

1

11

DWG. NO. 3215

SEC

3


11/10

PRINCE 3.5 INCH DIAMETER X 16 INCH STROKECYLINDER 3/4 O-RING PORTS

SEC

3

REF.NO.


NO.PART


123456789

1011

81002605855-001-404850-001-794855-001-413856-001-25281002604855-001-387856-001-254850-001-796**

Piston Rod#8 SAE PlugTubeButtGlandPistonLock Nut 7/8-14 Uni-TorqueHex NutTie RodO-RingO-Ring

11111114421

1213141516171819

*****850-001-804840-001-206856-001-239856-001-25881002580

Backup WasherO-RingU-CupBackup WasherWiperClevis PinHair Pin ClipClevis AssemblySeal Kit Includes Items 10, 11, 12, 13, 14, 15 & 16Complete 3 1/2 x 16 Cylinder Assembly*NOTE: Items marked “*” are available in seal kit.

21121121

DWG. NO. 2301Cylinder Identification Hiniker P/N 81002580Prince Pin SAE-9316A-5P


11/10

PRINCE 4 INCH DIAMETER X 16 INCH STROKECYLINDER 3/4 O-RING PORTS

P/N AM-111SP

REF.NO.


NO.PART


123456789

101112

861-001-222855-001-404861-001-223855-001-426855-001-425850-001-809951-005-034855-001-42481002578***

Piston Rod#8 SAE PlugTubeButtGlandPistonLock Nut 1 1/4-12 UNF Uni-TorqueHex NutTie RodO-RingO-RingBack Up Washer

111111144212

13141516171819

****850-001-818840-001-206855-001-402855-001-429

O-RingU-CupBack Up WasherWiperClevis PinHair Pin ClipClevis AssemblySeal Kit (Includes Items 10, 11, 12, 13, 14, 15 & 16)Complete 4 x 16 Cylinder AssemblyOrder 81004342* NOTE: Items marked “*” are available in seal kit.

1121121

DWG. NO. 2298Prince P/N AM-111SP

SEC

3


11/10

PRINCE 4 DIAMETER X 16 INCH STROKECYLINDER 3/4 O-RING PORTS

P/N AR-264

REF.NO.


NO.PART


123456789

1011

8100434385501736861-001-223855-001-4268100434481004345951-005-0348100451681002578880-001-35881004346

Piston RodBearing Ring *TubeButtGlandPistonLock Nut 1 1/4-12Cotter Pin (Not Shown)Tie Rod AssemblyO-Ring *Crown Seal *

11111114421

121314151617181920

850-001-814880-001-360855-001-4218100434781004348840-001-206855-001-40281004350810043518100435281004342

O-Ring *U-Cup Seal *Bu-Washer *Wiper *Clevis PinHairpin ClipClevis AssemblyPort PlugsBushing* = Included In Seal KitComplete 4.0 X 16 Inch Stroke Cylinder

112112132

DWG. NO. 2938ACylinder Identification Hiniker P/N 81004342Prince P/N AR-264

SEC

3


11/10

1817 4

2

7

15

1011

12

136

9 1 314

16 58

19

20

SEC

3

PRINCE 5 INCH DIAMETER X 16 INCH STROKE CYLINDER 7/8 O-RING PORTS

REF.NO.


NO.PART


123456789

101112

840-001-18981002593840-001-1918100259281002591840-001-194951-005-034855-001-42481002590

Piston Rod#10 SAE PlugTubeButtGlandPistonUni-Torque Lock Nut 1 1/4 -12Hex NutTie RodO-RingO-RingBU-Washer

111111144212

13141516171819

20

81004348840-001-206810025858100259481002581

81004351

O-RingU-Cup SealBU-WasherWiperClevis PinHairpin KlipClevis AssemblySeal Kit (Includes Items 10, 11, 12, 13, 14, 15 & 16)Complete 5 x 16 Cylinder Assembly 1999 & Earlier*Note: Items Marked “*” Are Available In Seal KitBushing

1121121

2

DWG. NO. 2935Cylinder Identification Hiniker P/N 81002581 1999 & EarlierPrince P/N SAE9516

REF.NO.


NO.PART


123456789

10

81004885840-001-19181004884810048738100487481004875810025858500350181004878840-001-206

Piston RodTubeTie RodButtGlandPistonClevisLock Nut 1 1/2-12Clevis PinHair Pin Clip

1141111112

11121314151718

81002593******8100487681004872

Port Plug 7/8-14Crown SealO-RingO-RingBu WasherWiperBearing RingSeal Kit (Includes Items (12, 13, 14, 15, 16, 17 & 18)Complete 5 x 16 Cylinder Assembly 2000 & Later

3121211

5 x 16 Cylinder

DWG. NO. 6186Prince P/N 35016SP


11/10

SEC

31

2 345

67

8

91011

12

13

1415 16

17

18

19

2021225

TEXAS HYDRAULIC 3 INCH DIAMETER X 8 INCH STROKECYLINDER 3/4 O-RING PORTS

REF.NO.


NO.PART


123456789

101112

805038528050385180503850805038498050384780503846805038458050384480503831805038438050384280503841

RodTubeHeadBase ClevisClip PinClevisNutCap ScrewO-RingClevis PinClevis PinLocknut

111141111111

13141516171819202122

805038408050383980503838805038378050383680503835805038348050383380503832805038488050385380503830

PlugNutLock NutTie RodWiperUni-RingU-CupBack-Up WasherO-RingPistonSeal Kit Includes Item 9, 17, 18, 19, 20 & 21Complete 3 x 8 Cylinder

1444111221

DWG. NO. 2305Texas Hydraulic P/N CHA3022E080-04


11/10

SEC

3

PRINCE HYDRAULIC 3 INCH DIAMETER X 8 INCH STROKECYLINDER 3/4 O-RING PORTS

REF.NO.


NO.PART


123456789

1011

8100450481004505810045068100450781004508810045098100451081004511810045128100451381004514

Piston RodTubeTie Rod AssemblyButtGlandPistonClevis AssemblyLock NutClevis PinHairpin ClipPort Plug 3/4-16

11411111221

1213141516171819

******810045158100451681004517

81004503

Crown SealO-RingO-RingBack-Up WasherU-CupWiperPort PlugCotter PinSeal Kit* = Items Included In Seal KitComplete 3 x 8 Cylinder Assembly

12121124

DWG. NO. 3012Cylinder Identification Hiniker P/N 81004503Prince Hyd. P/N SAE 33008SP


11/10

SEC

4TILLAGE UNIT AND COMPONENTSPAGE 2 & 3 TILLAGE UNIT ASSEMBLYPAGE 4 COULTER ADJUSTING STRAP ASSEMBLYPAGE 4 GAUGE WHEEL 4 X 16 TIRE ASSEMBLYPAGE 5 COULTER HUB ASSEMBLY 3 INCH WIDEPAGE 5 COULTER HUB ASSEMBLY 41NCH WIDE

TOOLBAR COMPONENTSPAGE 6 PARKING STAND ASSEMBLYPAGE 6 TILLAGE UNIT MOUNTING HARDWAREPAGE 7 BOLT ON UPPER HITCH ASSEMBLYPAGE 7 BOLT ON RH & LH LOWER HITCH ASSEMBLY

SECTION 4COMPONENT PARTS

BREAKDOWN


11/10

TILLAGE UNIT ASSEMBLYSERIAL NO. ENDING 101 OR HIGHER

DWG. NO. 3018

SEC

4


11/10

REF.NO.


NO.PART


12

3

456789

101112131415

16A1617181920212223242526272829303132333435363738394041424344454647484950

810040188100400081005573810040018100557481004003810040108100401581004008810040198100403325010376953-003-009810045648100400581004435810040938100409781004425953-003-01881004083953-003-019810040828100407681004098810040908100407281004075950-001-202810040708100443281004044810040438100441881004067805-001-001805-001-015810040618100440781004080810044148100404881004052810040548100405381004049950-001-229950-001-225950-001-264950-001-153950-001-273950-001-023950-001-132

Upper Parallel Link WeldmentRH Angle (For 5/8 U-Bolt)RH Angle (For 3/4 U-Bolt)LH Angle (For 5/8 U-Bolt)LH Angle (For 3/4 U-Bolt)Extension SpringLower Link WeldmentHandle WeldmentInner BushingFlange BearingTube8” Hinge PinSpring Pin 3/8 x 1 3/4Pivot LinkSpacerMast WeldmentPinPoint Weldment 6 1/4 LongPoint Weldment 7 1/4 LongSpring Pin 1/4 x 1 1/4PinSpring Pin 1/2 x 2Disc Plate WeldmentStrap WeldmentCompression SpringWasherAdjusting Link WeldmentLink WeldmentHex Head Cap Screw 3/4-10 x 2 1/4 Gr. 5Bottom PinShank WeldmentRH Gauge Wheel Arm WeldmentLH Gauge Wheel Arm WeldmentSweep Support WeldmentSleeveCoulter 18 InchBack-Up WasherBushingHub Assembly (3 Wide) See Section 4 Page 5Adjusting Strap Assembly - See Section 4 Page 4Support WeldmentGauge Wheel Pull StrapTire And Rim Assembly 4 x 16 - See Section 4 Page 4RH Side Plate WeldmentLH Side Plate WeldmentPivot BushingHex Head Cap Screw 3/4-10 x 8 Gr. 5Hex Head Cap Screw 3/4-10 x 11 Gr. 5Hex Head Cap Screw 3/4-10 x 9 1/2 Gr. 5Hex Head Cap Screw 3/4-10 x 7 1/2 Gr. 5Hex Head Cap Screw 3/4-10 x 12 Gr. 5Hex Head Cap Screw 5/8-11 x 2 Gr. 5Hex Head Cap Screw 5/8-11 x 1 3/4 Gr. 5

11111211481221211116122222111111111112111121112111132

5152535455565759606162636465666768697071727374757677787980818283848586

87

88899091929394959697

950-001-165950-001-259950-001-060950-001-135950-001-231031-0620881004434950-001-117951-002-001951-005-003950-001-125950-007-001950-003-028952-001-004951-001-00781004112952-004-003950-011-035952-002-007952-002-008951-005-044951-005-037951-005-0521030481004028950-001-112033-12013810040258100402981004031810040308100402781004032950-003-024805-001-33281003020875-001-038875-001-0358100403481005577952-001-005951-001-0088100448481004057810-002-10081104486950-001-033**81004802

6026

Hex Head Cap Screw 5/8-11 x 7 1/2 Gr. 5Hex Head Cap Screw 1/2-13 x 8 Gr. 5Hex Head Cap Screw 1/2-13 x 5 Gr. 5Hex Head Cap Screw 1/2-13 x 2 3/4 Gr. 5Hex Head Cap Screw 1/2-13 x 1 Gr. 5Hex Head Cap Screw 1/2-13 x 2 1/4 Gr. 5Lift Arm WeldmentHex Head Cap Screw 1/4-20 x 3/4 Gr. 5Whiz Lock Nut 1/4-20Mac-Lock 3/8-16Hex Head Cap Screw 1/2-13 x 1 1/2 Gr. 5Plow Bolt 3/8-16 x 1Carriage Bolt 1/2-13 x 1 1/4 Gr. 5Lock Washer 1/2 InchHex Nut 1/2-13Flat SpringMachine Bushing 25/32 x 1 1/4 x .075Flat Head Screw 3/4-10 x 3 Gr. 8Flat Washer 5/8 InchFlat Washer 3/4 Inch2-Way Lock Nut 5/8-112-Way Lock Nut 3/4-10Jam Nut 3/4-102-Way Lock Nut 1/2-13TubeHex Head Cap Screw 1/2-13 x 2 Gr. 5Flat Washer 3/4 Inch SAE PlatedPivot BushingTubeTubeTubeTubeTubeCarriage Bolt 3/8-16 x 3/4U-Bolt 5/8 (Fits 7 x 7)U-Bolt 5/8 (Fits 5 x 7)U-Bolt 3/4 (Fits 7 x 7)U-Bolt 3/4 (Fits 5 x 7)Support Plate (For 5/8 U-Bolt)Support Plate (For 3/4 U-Bolt)Lock Washer 5/8 InchHex Nut 5/8-11Pivot Link Anchor KitSupport WeldmentHub Assembly (4” Wide) Section 4 Page 5Coulter Holder Bolt Kit (1 Row)Hex Head Cap Screw 3/4-10 x 4 1/2 Gr. 5Shank Flat Bar WeldmentSweep Support WeldmentDust Cap* Not Sold Separately* Must Order 81004418 For Complete UnitComplete 6000 Tillage Unit Assembly

21216111161444414124781

1311421132422222114411111

2

SEC

4


11/10

SEC

4 2

1

5

6

64

4

3

COULTER ADJUSTING STRAP

DWG. NO. 2878

1

2

2

3

4

5

GAUGE WHEEL 4 X 16 TIRE ASSEMBLY

DWG. NO. 2879

REF.NO.


NO.PART


123

810041238100319681004002

Tire 4 x 16Half WheelBearing With Outer Bushing

121

45

950-001-232951-005-064

Hex Head Cap Screw 5/16-18 x 5/8 Gr. 52-Way Lock Nut 5/16-18

77

REF.NO.


NO.PART


123

510040478100404681004050

Coulter Pull StrapStrapAdjusting Washer

116

456

953-003-01981004078953-003-017

Spring Pin 1/2 x 2SpringSpring Pin 5/16 x 2

212


11/10

SEC

4

32

1

34

65

4

7

COULTER HUB ASSEMBLY 2 INCH WIDESERIAL NO. ENDING 101 OR HIGHER

DWG. NO. 3016

32

1

34

65

4

7

COULTER HUB ASSEMBLY 3 INCH WIDESERIAL NO. ENDING 100

DWG. NO. 3017

REF.NO.


NO.PART


1234

810-002-101810-002-034600-02009950-003-028

4 Bolt Hub WeldmentSpacerBearing 3/4Carriage Bolt 1/2 x 1 1/4

1124

567

952-001-004951-001-007810-002-100

Lock Washer 1/2 InchHex Nut 1/2-13Hub Assembly

441

REF.NO.


NO.PART


1234

8100441081004409600-02009950-003-028

4 Bolt Hub WeldmentSpacerBearing 3/4Carriage Bolt 1/2 x 1 1/4

1124

567

952-001-004951-001-00781004407

Lock Washer 1/2 InchHex Nut 1/2-13Hub Assembly

441


11/10

SEC

4

STORAGE OFPARKING STAND

5

4

6

3

24

5

75

4

1

PARKING STAND ASSEMBLY

DWG. NO. 1384A

WARNING 7

6000

HINIKER

3

2

1

ROW UNIT

312

1

4

5

WARNING

HINIKER

6000

3

2

6

SERIAL NO. ENDING 100OR HIGHERBOLT ON UPPER HITCH

SERIAL NO. ENDING 1008/30, 8/36, 12/30

SERIAL NO. ENDING 101OR HIGHER8/30, 8/36-38-40, 12/30

SERIAL NO. ENDING 10012/36-38-40, 16/30

TILLAGE UNIT MOUNTING HARDWARE

DWG. NO. 3015

REF.NO.


NO.PART


1

2

3

805-001-332875-001-03881004034810055778100418681005600

U-Bolt 5/8 (Fits 7 x 7)U-Bolt 3/4 (Fits 7 x 7)Support Plate (For 5/8 U-Bolts)Support Plate (For 3/4 U-Bolts)Spacer Strap (Fits 5/8 U-Bolt)Spacer Strap (Fits 3/4 U-Bolt)

A/RA/RA/RA/RA/RA/R

456

7

810-002-371950-001-08781003020875-001-035950-001-230

Spacer Plate (8/36 Only)Hex Head Cap Screw 5/8 x 1 1/2 (8/36 Only)U-Bolt 5/8 (Fits 5 x 7)U-Bolt 3/4 (Fits 5 x 7)Hex Head Cap Screw 5/8 x 9 1/2

48

A/RA/R

4

REF.NO.


NO.PART


123

81006028805-001-847875-001-038875-001-035

Stand WeldmentMounting Bracket WeldmentU-Bolt 3/4 x 7 13/16 Inch Center (Fits 7 x 7)U-Bolt 3/4 x 7 13/16 Inch Center (Fits 5 x 7)

1122

4567

952-001-006951-001-009953-002-021953-005-001

Lock Washer 3/4Hex Nut 3/4-10Clevis Pin 5/8 x 3 1/2 LongHair Pin Cotter .120 x 2 3/8 Long

4411


11/10

SEC

4

BOLT ON UPPER HITCH ASSEMBLY

DWG. NO. 1694

1

2

34

5

67 SMALL HOLE

R.H. SHOWN

8

BOLT ON RH AND LH LOWER HITCH ASSEMBLY

DWG. NO. 2880

REF.NO.


NO.PART


12

34

875-001-038810-002-456810-002-457230-026-005952-001-006

3/4 inch U-BoltRH Lower Hitch WeldmentLH Lower Hitch Weldment (Not Shown)Klik PinLock Washer 3/4 Inch

21114

5678

951-001-009953-003-002805-003-553810-002-052

Hex Nut 3/4-10Spring Pin 1/2 x 2 1/2Lower Hitch PinPin Assembly (Includes Items 6 & 7)

411

REF.NO.


NO.PART


1

23456

875-001-038875-001-035810-002-086810-002-087875-001-123230-026-004890-001-009

U-Bolt 3/4 (Fits 7 x 7)U-Bolt 3/4 (Fits 5 x 7)RH Upper HitchLH Upper HitchTop Link PinBushingSpacer

2211111

789

101112

950-001-170230-026-005951-001-011952-001-009951-001-009952-001-006

Hex Head Bolt 1-8 x 4 1/2Linch PinHex Nut 1-8Lock Washer 1 InchHex Nut 3/4-10Lock Washer 3/4 Inch

111144


11/10

SEC

5

SECTION 5OPTIONAL EQUIPMENT

PAGE 2 SWEEP SHARES ADJUSTABLE RIDGERSPAGE 3 NH3 COIL SHANK & BRACKET ASSEMBLY NH3 DISC CLOSER ASSEMBLYPAGE 4 COULTER SCRAPERS LIQUID FERTILIZER TUBE PAGE 5-6 SINGLE LIFT ASSIST ASSEMBLYPAGE 7 HYDRAULIC PLUMBING SINGLE LIFT ASSISTPAGE 8 HYDRAULIC PLUMBING DUAL LIFT ASSISTPAGE 9 TELESCOPING REAR HITCH (FOR SINGLE LIFT ASSIST)PAGE 10 TELESCOPING REAR HITCH (FOR DUAL LIFT ASSIST)PAGE 11 TELESCOPING REAR HITCHPAGE 12-13 RIGID TOOLBAR MOUNTING ROLLING SHIELD AND ROTARY HOE WHEELPAGE 14-16 FOLDING TOOLBAR MOUNTING ROLLING SHIELD AND ROTARY HOE WHEELPAGE 17 ROLLING SHIELD & ROTARY HOE WHEELPAGE 18 CUT AWAY HOE SHIELDPAGE 19 CUT AWAY HOE SHIELD AROUND TELESCOPING REAR HITCHPAGE 20 CONCRETE BLOCKS DOWN PRESSURE SPRING ASSEMBLYPAGE 21 VERTICAL WING FOLD STOP ASSEMBLYPAGE 22 CUT AWAY DISCPAGE 23 CAT #2 HITCH PIN WITHOUT QUICK HITCHPAGE 24-25 TUNNEL SHIELDPAGE 28 PLASTIC SHIELDPAGE 27 CUTAWAY DISC SHIELDPAGE 28 WARNING LIGHT KIT


11/10

SEC

5

47

6

5

11

23

SWEEP SHARES

DWG. NO. 2875

13

478

129

11

7

13

5

17

10

118

19

1614

11

5

6

10

15

2

14

9 11/16 9 3/8

Serial No. Ending 101 Or Higher Serial No. Ending 100ADJUSTABLE RIDGERS

DWG. NO. 2857

REF.NO.


NO.PART


123456789

101112

810-002-12481004231810-002-125810-002-126030-16132950-003-025030-16067952-004-059951-001-00710304951-002-003952-001-004

Ridger WingsSupport Weldment Serial No. 100LH SupportRH SupportCarriage Bolt 1/2-13 x 1 1/2 Gr. 5Carriage Bolt 1/2-13 x 2 Gr. 5Carriage Bolt 3/8-16 x 3/4 Gr. 5Flat Washer 9/16 x 1 3/4 x .250Hex Nut 1/2-13Lock Nut 1/2-13Whiz Lock Flange Nut 3/8-16Lock Washer 1/2 Inch

211131422242

13141516171819

81004143951-001-005950-001-108810044228100449981004500950-001-10581004125

81004447

Ridger Support WeldmentHex Nut 3/8-16Hex Head Cap Screw 3/8-16 x 1 1/2 Gr. 5Support Weldment Ser. No. 101 or HigherClevis PinRingHex Head Cap Screw 3/8-16 x 1 Gr. 5Complete 6000 Ridger Option (2 Row Box)Serial No. 100Complete 6000 Ridger Option (2 Row Box)Serial No. 101 or Higher

1221112

REF.NO.


NO.PART


1

25033-155033-175033-195033-215033-255033-275033-33

5044-15

* The Double Edge Shares Are Not Sold Separately. They Are Sold As A Two Row Set Which Contains: 4 Double Edge Shares. See Item 2 For Order No.Standard Harden Share15 Inch Double Edge Share17 Inch Double Edge Share19 inch Double Edge Share21 Inch Double Edge Share25 Inch Double Edge Share27 Inch Double Edge Share33 Inch Double Edge ShareHard Faces Shares15 Inch HF Double Edge Share-One Row

222222

34567

5044-175044-195044-215044-255044-275044-33950-007-001951-005-003950-001-125103048100409781004425

17 Inch HF Double Edge Shares-Two Row19 Inch HF Double Edge Shares-Two Row21 Inch HF Double Edge Shares-Two Row25 inch HF Double Edge Shares-Two Row27 Inch HF Double Edge Shares-Two Row33 Inch HF Double Edge Shares-Two RowPlow Bolt 3/8-16 x 1Mac Lock Nut 3/8-16Hex Head Cap Screw 1/2-13 x 1 1/2 Gr. 52-Way Lock Nut 1 1/2-13Point Weldment 6 1/4 LongPoint Weldment 7 1/4 Long

441111


11/10

SEC

5

3

4 1

3

3

9

2

7

5 82

6

NH3 COIL SHANK AND BRACKET ASSEMBLY

DWG. NO. 2881

2

3

4

5 6

1

1

NH3 DISC CLOSER ASSEMBLY

DWG. NO. 2876

REF.NO.


NO.PART


1234

8100412281004132953-003-003950-001-293

Disc AssemblyCable Tube WeldmentSpring PinHex Hed Cap Screw 1/2-13 x 2 1/2 Gr. 8

2121

56

951-001-007952-001-00481004120

Hex Nut 1/2-13Lock Washer 1/2 InchComplete Anhydrous Disc Closer Assembly

11

REF.NO.


NO.PART


12345

950-001-284950-001-15910304951-005-044950-001-147

Hex Head Cap Screw 1/2-13 x 4 3/4 Gr. 5Hex Head Cap Screw 1/2-13 x 2 1/2 Gr. 52-Way Lock Nut 1/2-132-Way Lock Nut 5/8-11Hex Head Cap Screw 5/8-11 x 2 1/2 Gr. 5

28 811

6789

8100449081004228810044898100410881004113

Saddle Bracket WeldmentSide PlateTop PlateCoil ShankComplete Coil Shank W/Mount Bracket (1 Row)

1211


11/10

SEC

5

13

4

2

5

7

7

55

6

6

5

7

6

6

Serial No. Ending 101 Or Higher Serial No. Ending 100

COULTER SCRAPER

DWG. NO. 2882

21

Serial No. Ending 101 Or Higher Serial No. Ending 100

LIQUID FERTILIZER TUBE

DWG. NO. 2877

REF.NO.


NO.PART


1 81004446 Fertilizer Tube Weldment With Instruction Sheet

1 2 81004119 Liquid Fertilizer Tube Assembly With Instruction Sheet

1

REF.NO.


NO.PART


1234

8100411481004115950-006-002951-005-064

Flat SpringRotary ScraperHex Head Shoulder Bolt 5/16-18 x 5/82-Way Lock Nut 5/16-18

2222

567

951-005-003950-003-0248100412181004118

Lock Nut 3/8-16Carriage Bolt 3/8-16 x 3/4 Gr. 5Rotary Scraper AssemblyComplete Rotary Scraper Assembly (1 Row)

442


11/10

SEC

5

1

2

3

4

5

6 78 9

10

11

12

13

14

15

16

17

18

7

21 22

2324

25

20

1921

17

926

SINGLE LIFT ASSIST ASSEMBLY

REF.NO.


NO.PART


123456789

101112

13

81002664810042038100415381002661880-001-071810026608100264781002648953-003-01781004503950-001-186950-001.168950-001-210951-001-024

Rear Mast WeldmentFront Mast WeldmentMount Strap WeldmentRear Guide WeldmentCompression SpringFront Guide WeldmentLink Arm WeldmentCylinder Arm PinSpring Pin 5/16 x 2Hydraulic Cylinder 3 x 8 (See Sec. 3 Page 8)Hex Head Cap Screw 1-8 x 6 Gr. 5Hex Head Cap Screw Fits 7 x 7Hex Head Cap Screw 7/8 x 10 Gr. 5 Fits Twin 5 x 7Hex Nut 1-8

11212121412882

14151617181920212223242526

952-001-009952-001-008951-001-010955-001-001850-001-568950-008-00981002607805-001-105810-002-18881002655034-05173951-001-022

6013

Lock Washer 1 InchLock Washer 7/8 InchHex Nut 7/8-9Grease FittingTire And Rim Assembly 9.5L x 15 (See Sec. 5 Pg. 6)Square Head Set Screw 1/2-13 x 1Caution DecalStern CollarSleeveSpring Guide WeldUni-Torque Lock Nut 3/4-10Hex Nut 1 1/4-7Caster Stem Spindle And Hub Ass’y (See Sec. 5 Pg. 6)Complete Single Lift Assist

28831

4122222

DWG. NO. 2883


11/10

SEC

5

HUB AND SPINDLE/TIRE AND RIM

DWG. NO. 3014

HUB SUB-ASSEMBLY

DWG. NO. 1698

REF.NO.


NO.PART


1234

850-001-157850-001-164850-001-154950-011-006

Hub Assembly W/Bearing CupsSeal Triple Lip C/R #16286Inner Bearing Cone JL69349Wheel Bolt 1/2 x 1

1116

5678

955-001-001850-001-159850-001-158850-001-555

Grease FittingInner Bearing Cup JL 69310Outer Bearing Cup LM 67010Wear Sleeve

1111

REF.NO.


NO.PART


12345

805-001-096

850-001-153802-000-007951-005-002

Axle WeldmentHub Sub-Assembly (See Below)Outer Bearing Cone LM 67048WasherSlotted Nut 7/8-14 UNF

11111

6789

10

850-001-155953-001-017850-001-004850-001-093850-001-396

Hub CapCotter Pin 5/32 x 1 1/2Tire-6 Ply 9.5L x 15”Rim-6 Bolt 8 LB. x 15”Tire Valve

11111


11/10

SEC

5

DIRECTIONOF FLOW

30O

1

2

3

4

6

8

7

9

10

5

1

1

11

HYDRAULIC PLUMBING SINGLE LIFT ASSIST WHEEL

REF.NO.


NO.PART


123456

956-004-002957-002-015956-005.00381004503957-002-016921-001-145

Reducer Bushing 1/2-14 MNPT To 3/8-18 FNPTHose Assembly 3/4 x 108 Inch LongElbow 90o 1/2-14 MNPT To 9/16-18 Male 37o JICCylinder 3 x 8, 3/4-16 O-Ring Ports (See Sec. 3 Pg. 8)Hose Assembly 3/8 x 126 Inch LongPlastic Cable Tie 21 Inches Long

311113

789

1011

921-001-144956-003-020956-007-002956-008-022956-005-001

Plastic Cable Tie 14 Inches LongStraight Adapter 3/4-16 O-Ring To 1/2-14 MNPTTee 1/2-14 FNPTRelief Valve 3/8-18 FNPTElbow 90o 3/4-16 O-Ring To 9/16-18 Male 37o JIC

31111

DWG. NO. 2861A


11/10

SEC

5

NOTE: PIVOT ITEMS 9 (TEE) 30° TO THE RIGHT.6

10

9

81

7

11

6

10

11

7

9

18

4 5

3

332

1

1

23

4

5

DIRECTIONOF FLOW

DIRECTIONOF FLOW

30°

30°

BULKHEAD BRACKET

HYDRAULIC PLUMBING DUAL LIFT ASSIST

REF.NO.


NO.PART


123

456

956-004-002957-002-014956-007-003

957-001-017957-001-05881004503

Reducer Bushing 1/2-14 MNPT To 3/8-18 FNPTHose Assembly 3/8 x 48 Inches LongBulkhead Tee 9/16-18 Male 37o JICTo 9/16-18 Male 37o JIC On Run 9/16-18 Male 37o JIC Bulkhead On BracketHose Assembly 3/8 x 72 Inches LongHose Assembly 3/8 x 82 Inches LongStroke Cylinder 3 Inch Diameter x 8 Inch With3/4-16 O-Ring Port (See Sec. 3 Page 8)

422

222

789

1011

956-005-003956-003-020956-007-002956-008-022956-005-001

Elbow 90o 1/2-14 MNPT To 9/16-18 Male 37o JICStraight Adapter 1/2 MNPT To 3/4 Male ORBStreet Tee 1/2 FNPTRelief Valve 3/8 FNPTElbow 90o 3/4-16 Male ORB To 9/16-18 Male 37o JIC

22222

DWG. NO. 2925


11/10

SEC

5

TELESCOPING REAR HITCH (FOR SINGLE LIFT ASSIST)

REF.NO.


NO.PART


12345678

950-001-141810-001-526810-001-518952-001-005951-001-008952-002-010810-001-527953-003-003

Hex Head Cap Screw 5/8-11 x 3CollarHitch Plate WeldmentLock Washer 5/8 InchHex Nut 5/8-11Flat Washer 1 InchSpringSpring Pin 1/4 x 1 3/4

12111111

91011121314

810-001-522810-001-580950-001-151952-001-006951-001-009810-001-5786314

Handle WeldmentAnhydrous Hitch WeldmentHex Head Cap Screw 3/4-10 x 9 Gr. 5Lock Washer 3/4 InchHex Nut 3/4-10Mount WeldmentComplete Anhydrous Hitch Assembly

114441

DWG. NO. 1051


11/10

SEC

5

TELESCOPING REAR HITCH (WITH DUAL LIFT ASSIST)

REF.NO.


NO.PART


123456789

810-001-206810-002-334810-002-328875-001-035950-001-229810-001-518950-001-008810-001-526952-001-005

Anhydrous Hitch WeldmentMount PlateCross TubeU-Bolt 3/4Hex Bolt 3/4-10 x 8 Gr. 5Hitch Plate WeldmentHex Bolt 5/8-11 x 3 Gr. 5CollarLock Washer 5/8 Inch

121481121

10111213141516

951-001-008810-001-522810-001-527952-002-010951-001-009952-001-006953-003-0035025

Hex Nut 5/8-11Handle WeldmentSpringFlat Washer 1 InchHex Nut 3/4-10Lock Washer 3/4Spring Pin 1/4 x 1-3/4Complete Anhydrous Hitch Assembly

1111

16161

DWG. NO. 1667


11/10

SEC

5

TELESCOPING REAR HITCH

REF.NO.


NO.PART


1234567

89

101112

81004163810-002-212810041538100416181004136810-001-522810-001-551

810-001-526810-001-527952-002-010953-003-003875-001-038

Hitch WeldmentSupport WeldmentMount Strap WeldmentHitch Plate WeldmentDecalHandle WeldmentShield Mount Strap (Used With Rotary Hoe Wheel And Rolling Shields)CollarSpringFlat Washer 1 InchSpring Pin 1/4 x 1 3/4U-Bolt

1221214

4111

131415161718192021222324

952-001-005951-001-008952-001-008951-001-010952-001-006951-001-009950-001-147950-001-168950-001-141950-003-02181004690950-001-21081004116

Lock Washer 5/8 InchHex Nut 5/8-11Lock Washer 7/8 InchHex Nut 7/8-9Lock Washer 3/4 inchHex Nut 3/4-10Hex Head Cap Screw 5/8-11 x 2 1/2 Gr. 5Hex Head Cap Screw 7/8-9 x 3 Gr. 5Hex Head Cap Screw 5/8-11 x 3 Gr. 5Carriage Bolt 5/8-11 x 1 1/4 Gr. 2Lock PlateHex Head Cap Screw 7/8-9 x 10 Gr. 5Complete Hitch Assembly

21414884482828

DWG. NO. 2862


11/10

SEC

5

30"

2 7/8"TYP.

7

2

3

4

5

1

6

5

4

WELD SHIELD MOUNTSTRAP (ITEM 7) TOHITCH SUPPORT (ITEM 6)TELESCOPING

REAR HITCH

36"

1 5/8" TYP.

WELD SHIELD MOUNTSTRAP (ITEM 7) TOHITCH SUPPORT (ITEM 6)

6

TELESCOPINGREAR HITCH

1

7

2

5

4

54

3

24

5

1

5

4

38"

1 1/8" TYP.

TELESCOPINGREAR HITCH

37

WELD SHIELD MOUNT STRAP (ITEM 7) TOHITCH SUPPORT (ITEM 6)

6ON ALL 38" MODELS

ON ALL 36" MODELS

ON ALL 30" MODELS

MOUNTING ROLLING SHIELD AND ROTARY HOE WHEEL

RIGID TOOLBAR MOUNTING ALL SERIAL NO. MODELS

REF.NO.


NO.PART


1234

810-002-363810-002-364950-003-021951-001-008

LH Mount BracketRH Mount BracketCarriage Bolt 5/8-11 x 1 1/4Hex Nut 5/8-11

2288

567

952-001-005810-002-212810-001-551

Lock Washer 5/8 InchHitch Support WeldmentShield Mount Strap

824

DWG. NO. 2888


11/10

SEC

5

30"

LIFT ASSIST

3

1

254

LIFT ASSIST

3

36"

2

14 5

2

4 5

LIFT ASSIST

38"

1

3

ON ALL 36" MODELS

ON ALL 38" MODELS

ON ALL 30" MODELS


RIGID TOOLBAR MOUNTING ALL SERIAL NO. MODELS

REF.NO.


NO.PART


123

810-002-364810-002-363805-001-332

RH Mount BracketLH Mount BracketCenter U-Bolt 5/8 x 7 5/8

224

45

951-001-008952-001-005

Hex Nut 5/8-11Lock Washer 5/8 Inch

88

DWG. NO. 2889


11/10

SEC

5

8, 11, 12910

5, 6, 7

38" ALL MODELS

36" ALL MODELS

30" ALL MODELS

267

30

2

67

36

RIGHT SIDE HINGE SHOWN

2

38

76

5

5

5

NOTE: POSITION OF SLOTMUST BE ON INSIDE


ROLLING SHIELDS & ROTARY HOEWHEEL MOUNT BRACKETS, WITH ORWITHOUT TELESCOPING REAR HITCHOR LIFT ASSIST.

1

1

1

44

3

3

33

3

4

4

4

4

3

13TOP VIEW

RIGID TOOLBAR MOUNTING FOLDING TOOLBAR MOUNTING8/30, 8/36-38,12/30 SERIAL NO. ENDING 100

REF.NO.


NO.PART


12345678

810-002-310810-002-311810-002-364810-002-363950.001-087952-001-005951-001-008950-001-029

Mount PlateMount Bracket WeldmentRH Mount BracketLH Mount BracketHex Head Cap Screw 5/8-11 x 1-1/2Lock Washer 5/8Hex Nut 5/8-11Hex Head Cap Screw 3/4-10 x 1-3/4 Gr. 5

22

A/RA/R16

A/RA/R

4

910111213

952-002-008810-002-421952-001-006951-001-009805-001-329

Flat Washer 3/4 InchBushingLock Washer 3/4 InchHex Nut 3/4-10Spacers* NOTE: Spacers Used To Align Shields Over The Row

2244

A/R

DWG. NO. 2868


11/10

SEC

538" ALL MODELS

36" ALL MODELS

30" ALL MODELS

67

30

67

36


38

76

5

5

5



1

1

1

4

3

3

3

4

4

WARNING

3

4

4

3

40

4

3

1

76

5 40" ALL MODELS

5

2

8

6

7

WARNING

5

8

2

WARNING

5

8

2

WARNING

5

8

2

7

6

6

74

3

4 6

73

5

5

5

5

9 & 10

9 & 10

67

6

7

RIGID TOOLBAR MOUNTING FOLDING TOOLBAR MOUNTING8/30, 8/36-38,12/30 SERIAL NO. ENDING 101 OR HIGHER

REF.NO.


NO.PART


12345

810-002-31081004288810-002-364810-002-363950-001-087

Mount PlateMount BracketRH Mount BracketLH Mount BracketHex Head Cap Screw 5/8-11 x 1 1/2

22

A/RA/R18

6789

10

952-001-005951-001-008805-001-3328100433581004336

Lock Washer 5/8 InchHex Nut 5/8-11U-Bolt 5/8 x 7 5/8RH Angle (Right Side Wing)LH Angle (Left Side Wing)

A/RA/R

222

DWG. NO. 2974


11/10

SEC

5

12 ROW 38"

12 ROW 36"

16 ROW 30"

67

30

38

76

5



1

4

3

3

4

6

3

7

5

41

5

1

2

2

2

MOUNTING AROUNDHITCH PLATES

36

&

&

40

12 ROW 40"

12 ROW 38"

12 ROW 36"

16 ROW 30"


WARNING

3

4

4

3

12 ROW 40"

5

8

9

6

7

WARNING

12

9

8

WARNING

5

9

8

WARNING

5

9

8

7

6

6

74

3

4 6

73

5

5

5

5

10 & 11

10 & 11

67

6

7

13

FOLDING TOOLBAR MOUNTING ROLLING SHIELD AND ROTARY HOE WHEEL12/36-38,12140, 16/30 SERIAL NO. ENDING IN 100 AND HIGHER

REF.NO.


NO.PART


1234567

810-002-31081003020810-002-364810-002-363950-001-087952-001-005951-001-008

Mount Plate5/8 U-BoltRH Mount BracketLH Mount BracketHex Bolt 5/8-11 x 1 1/2Lock Washer 5/8 InchHex Nut 5/8-11

2A/RA/RA/RA/RA/RA/R

89

10111213

81004288805-001-3328100433581004336950-001-14781004317

Mount BracketU-Bolt 5/8 x 7 5/8RH Angle (Right Side Wing)LH Angle (Left Side Wing)Hex Head Cap Screw 5/8-11 x 2 1/2Spacer

222288

DWG. NO. 2926


11/10

SEC

5

1836 34

3940 34

3434

31 3031

3434

34

39

4029

342623 19

172627

11

2732

3227

2831

1441

4131282732

3227

10

262319

33 192325

2523 19

9

2237

5

21

38

8

13

416

15

2 112

3242023

19

19

2024

35

636

37

387 22

23

ROTARY HOE OPTIONLIVE AXLE ROLLING SHIELD OPTION

ROLLING SHIELD AND ROTARY HOE WHEEL

REF.NO.


NO.PART


123456789

1011121314151617

18

1920

805-001-332810-002-364810-002-363810-001-487810-001-497810-001-500850-002-403810-002-357810-001-179810-001-499810-001-498810-001-490810-002-361810-001-590950-001-060950-001-131950-001-259

950-001-274

951-001-007951-001-008

U-Bolt 5/8 x 7 5/8 Inch CenterRight Mount BracketLeft Mount BracketBracket WeldmentSpring BracketRodCompression SpringOuter Channel WeldmentInner Channel Assembly (Includes Items 33 & 41)Left Rolling Shield WeldmentRight Rolling Shield WeldmentSpacerTubeAxle (Rolling Shield Only)Hex Head Cap Screw 1/2-13 x 5 Gr. 5Hex Head Cap Screw 5/8-11 x 4 1/2 Gr. 5Hex Head Cap Screw 1/2-13 x 7 Gr. 5(Rolling Shield Option Only)Hex Head Cap Screw 1/2-13 x 10 Gr. 5(Rolling Shield Option Only)Hex Nut 1/2-13Hex Nut 5/8-11

21111111111211211

1

55

2122232425262728

29303132333435363738394041

950-001-125950-008-008952-001-004952-001-005952-002-005952-004-059952-002-010952-003-005

810-002-462810-002-461515-301-012810-001-591955-001-002810-002-463953.005.002953.001-010828-001-005810-001-493810-002-467810-002-466515-301-004

Hex Head Cap Screw 1/2-13 x 1 1/2 Gr. 5Square Head Set Screw 1/2-13 x 3/4Look Washer 1/2 InchLock Washer 5/8 InchFlat Washer 1/2 InchFlat Washer 9/16 x 1 3/4 x .250Flat Washer 1 Inch (Rolling Shield Option Only)Flat Washer 1 Inch SAE (Rolling ShieldOption Only)Axle Tube (Rotary Hoe Option Only)Sleeve Axle Bearing (Rotary Hoe Option Only)Dust CapSpacer (Rolling Shield Option Only)Grease Fitting 1/4-28 UNFAxle Spacer (Rotary Hoe Option Only)Hair Pin Cotter .178 x 3 9/16Cotter Pin 1/4 x 1 1/2Lock CollarSpring Cap WeldmentWheel Assembly With Washer WeldmentWasher Weldment (Service Replacement Part)Bronze Bearing

22552252

1124181122242

DWG. NO. 1855


11/10

SEC

5

26

ROW

SERIES 6000

67

1 9/16 FOR 36/38"9/16 FOR 30" ROWS

15

9

23

2316

25

12

3

27

21

18

22

20

17

24

1314

22

4

248

11

25

10

24

5 19

AGGRESSIVE

1,2

NOTE:

ROTARY HOEPOSITION

6,7 TEETH

PASSIVE

SEE DETAIL A

DETAIL A

28

29

31

30

32

15

34

33

37

38

3536

SEE DETAIL B

DETAIL B

CUTAWAY HOE SHIELD

REF.NO.


NO.PART


123456789

10

111213141516171819

81004573810045748100457881004649810046528100458381004584810046548100465381004569810045828100465081004549810045718100457781004572950-001-126950-001-075950-003-034950-001-105

RH Wheel AssemblyLH Wheel AssemblySpring AssemblyInner Mount Tube WeldmentTube WeldmentRH Bottom Plate WeldmentLH Bottom Plate WeldmentRH Mount PlateLH Mount PlateMounting ChannelMount Tube (22” Narrow Row)Mount Tuba (28” Wide Row)PinInner Tube 2 7/16 LongSpacer 2 1/16 LongDiagonal U-BoltHex Head Cap Screw 1/2-13 x 4 1/2 Gr. 5Hex Head Cap Screw 1/2-13 x 3 1/2 Gr. 5Hex Head Cap Screw 1/2-13 x 3 Gr. 5Clevis Pin 1/2 x 1 1/4

11222111121122242222

20212223242526272829303132333435363738

950-003-029952-001-007951-001-007953-003-00110304951-002-003951-001-005035-420648100458181003538953-003-0198100407881004570810042178100433381004216950-002-00781004565951-002-002

Hex Head Cap Screw 3/8-16 x 1 Gr. 5Carriage Bolt 3/8-16 x 1 Gr. 5Lock Washer 3/8 Inch Med Split SAEHair Pin .120 x 2 3/8Lock Nut 1/2-13Hex Flanged Whiz Lock Nut 3/8-16Hex Nut 3/8-16Cotter Pin 1/4 x 1 3/4Guide StrapSpacer 2 11/16 LongSpring Pin 1/2 x 2Compression SpringWasherHub FlangeShaft BearingHub Flange With HoleHex Head Flanged Whiz Lock Bolt 5/16-18 x 1Disc Wheel CoverHex Flanged Whiz Lock Nut 5/16-18

2244682221112111414

DWG. NO. 3155


11/10

SEC

5

2 1

3

4

5

CUTAWAY HOE SHIELD AROUNDTELESCOPING REAR HITCH

REF.NO.


NO.PART


123

81004639950-003-03081004640

Mount PlateCarriage Bolt 3/8-16 x 4 1/2 Gr. 2Mounting Tube Weldment

282

45

952-001-007951-001-005

Lock Washer 3/8 InchHex Nut 3/8-16

88

DWG. NO. 3156


11/10

SEC

5

1

CONCRETE BLOCKS

DWG. NO. 1666

7

13

5

18

64

2

ASSEMBLED VIEW OF EXTRA DOWN PRESSURE ASSEMBLY

DOWN PRESSURE SPRING ASSEMBLY

DWG. NO. 2887

REF.NO.


NO.PART


12345

8100410261004106810041038100410481004105

WasherTop Slide AnchorTubeCoverDouble Torsion Spring

21111

678

031-30078950-001-2591030481004117

Slotted Hex Self Tapping Screw #8 x 1/2 ABHex Head Cap Screw 1/2-13 x 8 Gr. 5Lock Nut 1/2-13Down Pressure Spring Assembly (2 Row)

411

REF.NO.


NO.PART


1 810-001-176 Concrete Blocks 2


11/10

SEC

5

CENTER SECTION

4" CYL=10 5/16 LG5" CYL=8 7/16 LG

6

WING SECTION

CYL CLEVIS

1 1/2 REF.

73,4,5

1

(IN STORAGEPOSITION)

2

44

8

VERTICAL WING FOLD STOP ASSEMBLY8/36-38-40,12/30 SERIAL NO. ENDING 101 OR HIGHER

12/36-38,12/40,16/30 SERIAL NO. ENDING 100 OR HIGHER

REF.NO.


NO.PART


123456

8100437581004379875-001-038952-001-006951-001-00981004377

Wing Stand WeldmentPin AssemblyU-Bolt 3/4-10 x 7 3/4Lock Washer 3/4Hex Nut 3/4-10, 81004377Cylinder Spacer 2-5/8 O.D. x 8 7/16(Fits 5 x 16 Cylinder)

224882

78

81004445

950-008-001953-005-00281004355

Cylinder Spacer 2 3/8 O.D. x 10 5/16(Fits 4 x 16 Cylinder)Hex Socket Head Set Screw 3/8-16 x 3/8Hair Pin Cotter .178 x 3 9/16Complete Vertical Wing Fold Stop Assembly

2

222

DWG. NO. 3013


11/10

SEC

5

12

9

1415

11

10

174

2

3

13

183

1

8

56

7

8

16

1920

1420

SEE DETAIL A

DETAIL A

CUTAWAY DISC

REF.NO.


NO.PART


1

234

5

6789

8100461481004615953-002-034953-005-00181004616810046178100462281004637950-001-159950-001-075951-001-007951-005-037

RH Inner Tube WeldmentLH Inner Tube WeldmentClevis Pin 1/2 x 1 1/4Hair Pin .120 x 2 3/8LH Shank WeldmentRH Shank WeldmentCross Tube Weldment (Narrow Row)Cross Tube Weldment (Wide Row)Hex Head Cap Screw 1/2-13 x 2 1/2 Gr. 5Hex Head Cap Screw 1/2-13 x 3 Gr. 5Hex Nut 1/2-132-Way Lock Nut 3/4-10

112411112282

1011121314151617181920

805-001-476805-001-002950-003-017703-00209952-004-00381004620952-001-004950-001-069703-0013881004623600-02009

Hub CapConcave DiscCarriage Bolt 1/2-13 x 1 Gr. 2Locking PinWasher 1 1/4 O.D. x 25/32 I.D.Hub AssemblyLock Washer 1/2 InchHex Head Cap Screw 3/4 - 10 x 3 1/4 Gr. 5Clevis PinHub WeldmentBall Bearing

2282

10282224

DWG. NO. 3170


11/10

SEC

5

CAT #3 PINSSTORAGE POSITIONTIE UP WITH WIRE

1

1

2

3

34

5

6

619"

1 1/8 DIA.

1" DIA.

CAT. #2 HITCH PINSWITHOUT QUICK HITCH

REF.NO.


NO.PART


123

810044988100449381004494

Inside BushingLower PinRetaining Ring

424

456

81004495875-001-12381004496

Lower BushingTop Link Pin Cat. IIBushing

212

DWG. NO. 3157


11/10

SEC

5

18

19

19

18

13

10

4

8

1014

5

1215

16

1

2

3

9

15

16

6

13

17

1310 1

2

7

11

9 1/4

TUNNEL SHIELD

REF.NO.


NO.PART


123456789

031-21035034-051178100467381004666810049718100467781004672950-001-105950-001-226

Square Head Set Screw 3/8-16 x 1 3/4 CupHex Jam Nut 3/8-16LH Mount WeldmentTunnel Shield Assembly 48”Mount Tube 30’ RowsChainRH Mount WeldmentHex Head Cap Screw 3/8-16 x 1 Gr. 5Hex Head Cap Screw 1/2-13 x 5 1/2 Gr. 5

221212122

1011121314151617

951-001-005951-001-007952-001-004952-001-007952-002-003952-002-005952-004-057953-005-002

Hex Nut 3/8-16Hex Nut 1/2-13Lock Washer 1/2 Inch Med Split SAELock Washer 3/8 Inch Med Split SAEFlat Washer 3/8 Inch WRTFlat Washer 1/2 Inch WRTLock Washer 1/2 Int - ExtHair Pin Cotter .178 x 3 9/16

22222442

DWG. NO. 3125


11/10

SEC

5

9

7

10

9

8

9

4 6

3

2

6

1

8 4

10

6

5

9

9 1

TUNNEL SHIELD PARTS BREAKDOWN

REF.NO.


NO.PART


12345

810-001-640810-001-649810-001-6508100466581004670

Tunnel ChannelReinforcement Strap3/8 U-Bolt 1 7/8 CenterStrap Weldment PivotTunnel Shield 48”

22222

6789

10

950-001-124950-003-029951-001-005951-005-023952-007-007

Hex Head Cap Screw 1/2-13 x 4 Gr. 5Carriage Bolt 3/8-16 x 1Hex Nut 3/8-16Mac Lock Nut 1/2-133/8 Inch Lock Washer

44848

DWG. NO. 3118


11/10

SEC

5

FRONT

13

17

2511

18

1218

8

1

SEE DETAIL A

DETAIL A

21

3

4,5

20

16

3

21

62

6

23

15

19

10

14

914

19

22

1

30

33

32

33

32

28

27

34

29

26

35

7

9

24

27

31

NO SLOT

20"

PLASTIC SHIELD

REF.NO.


NO.PART


123456789

101112131415161718

700-14403601189953-001-007810-001-834810-001-8358100454081002707810027098100271581002741810045248100452981004530950-001-084950-002-008950-001-113030-12046951-002-002

Hex Slot Head Self Tapping Screw #10 x 1/2Extension SpringCotter Pin 3/16 x 1 1/2RH Shield (Shown)LH ShieldRigid Link WeldmentTop ChannelChainBushingU-Bolt 3/8 x 1 7/8 CenterRod WeldmentFrame Weldment/Skid AssemblyPlastic SkidHex Head Cap Screw 3/8-16 x 4 Gr. 5Hex Head Flanged Whiz Lock Bolt 3/8-18 x 3/4Hex Head Cap Screw 5/16-16 x 3/4 Gr. 5Carriage Bolt 5/16-18 x 2 Gr. 2Hex Head Flanged Whiz Lock Nut 5/16-18

424114224422262426

1920212223242526272829303132333435

951-002-003952-002-002952-002-008953-005-00281004538805-001-725950-005-020950-001-246952-001-004951-001-0078100468281004683950-001-060031-21035034-051478100467181004686

Hex Head Flanged Whiz Lock Nut 3/8-16Flat Washer 5/16 Inch WRTFlat Washer 3/4 Inch WRTHair Pin Cotter .178 x 3 9/16Stop PlateChain ConnectorHex Head Self Tapping Screw #10-16 x 3/4Hex Head Cap Screw 1/2-13 x 7 1/2 Gr. 5Lock Washer 1/2 InchHex Nut 1/2-13RH Mount WeldmentLH Mount WeldmentHex Head Cap Screw 1/2-13 x 5 Gr. 5Set Screw Square Head 3/8 x 1 3/4 Cup PointJam Nut 3/8-16Mount Tube 30 RowSpacer Tube

204622261331122211

DWG. NO. 3171


11/10

SEC

5

WARNING LIGHT KIT6000 ROW CROP CULTIVATOR

REF.NO.


NO.PART


123456789

031-06007951-001-2303610000036100001921-001-145388090298100302081003404034-05150

Hex Head Cap Screw 1/4 x 1 1/4 Gr. 5Hex Nut 5/8-16Implement Light LH AssemblyImplement Light RH AssemblyBlack Cable Tie 21 InchesCultivator Lighting Harness 16’ (Includes 10 & 11)5/8 U-Bolt 7 5/8 CenterWarning Light BracketStover Lock Nut 1/4

8411

161228

1011121314151617

3845000238400004952-001-005950-001-230624960810035278100352881003529

Connector Plug 7 PinStrain Relief SpringLock Washer 5/8 InchHex Head Cap Screw 5/8-16 x 9 1/2 Gr. 5Cord CarrierRH Warning Light BracketLH Warning Light BracketInstruction Warning Lights (Not Shown)

11842111

DWG. NO. 3601


11/10

SEC

5

CUTAWAY DISC SHIELD 1999

REF.NO.


NO.PART


123456789

101112131415161718192021

81004654810046538100354181004649810046528100458381004584950-002-003951-002-00181004569810042168100454981004571810045778100457281003363950-001-142950-001-075953-003-034950-001-105950-003-029

RH Mount Plate (1996 Only)LH Mount Plate (1996 Only)Disc Spring AssyInner Mount Tube WeldmentTube WeldRH Bottom Plate WeldmentLH Bottom Plate WeldmentHex Head Flanged Whiz Lock Bolt 1/4-20 x 3/4Hex Flanged Whiz Lock Nut 1/4-20Mounting ChannelHub Flange With HolePinInner TubeSpacerDiagonal U-Bolt18” DiscHex Head Cap Screw 1/2-13 x 3 1/2 Gr. 5Hex Head Cap Screw 1/2-13 x 3 Gr. 5Clevis Pin 1/2 x 1 1/4Hex Head Cap Screw 3/8-16 x 1 Gr. 5Carriage Bolt 3/8-16 x 1 Gr. 5

112221166212224122222

222324252627

282930313233343536373839

952-001-007953-003-00110304951-002-003951-001-0058100340681003368

951-005-089031-060078100353981003538953-003-0198100407881004570810042178100433381004216950-001-12681004582

Lock Washer 3/8 Med Split SAEHair Pin .120 x 2 3/8Lock Nut 1/2-13Hex Flanged Whiz Lock Nut 3/8-16Hex Nut 3/8-16Disc Assembly (Includes Items 8, 9, 16, 35, 36, 37)End Shield Assembly Not Shown (Includes Items 8,9,16,35,36,37)2 Way Lock Nut 1/4-20Hex Head Cap Screw 1/4-20 x 1 1/4 Gr. 5Guide Strap HTSpacer HTSpring Pin 1/2 x 2Compression SpringWasherHub FlangeShaft BearingHub Flange With HoleHex Head Cap Screw 1/2-13 x 4 1/2 Gr. 5Mount Tube

4478242

121111211121

DWG. NO. 3860A


11/10

SEC

5

CUTAWAY DISC SHIELD 2000

REF.NO.


NO.PART


123456789

1011121314151617181920

950-001-075950-001-1598100354181004649810046528100458381004584950-002-003951-002-00181004569810042168100454981004571810045778100457281003363950-001-142950-001-075953-003-034950-001-105

Hex Head Cap Screw 1/2-13 x 3 Gr. 5Hex Head Cap Screw 1/2-13 x 2 1/2 Gr. 5Disc Spring AssemblyInner Mount Tube WeldmentTube WeldmentRH Bottom Plate WeldmentLH Bottom Plate WeldmentHex Head Flanged Whiz Lock Bolt 1/4-20 x 3/4Hex Head Flanged Whiz Lock Nut 1/4-20Mounting ChannelHub Flange With HolePinInner TubaSpacerDiagonal U-Bolt18” DiscHex Head Cap Screw 1/2-13 x 3 1/2 Gr. 5Hex Head Cap Screw 1/2-13 x 3 Gr. 5Clevis Pin 1/2 x 1 1/4Hex Head Cap Screw 3/8-16 x 1 Gr. 5

22222116621222412222

21222324252627

2829303132333435363738

950-003-029952-001-007953-003-00110304951-002-003951-001-0058100340681003368

951-005-089031-060078100353981003538953-003-019810040788100457081004217810043338100421681004866

Carriage Bolt 3/8-16 x 1 Gr. 5Lock Washer 3/8 Med Split SAEHair Pin .120 x 2 3/8Lock Nut 1/2-13Hex Flanged Whiz Lock Nut 3/8-16Hex Nut 3/8-16Disc Assembly (Includes Items 8, 9, 16, 35, 36, 37)End Shield Assy Not Shown (Includes Items8, 9, 16, 35, 36, 37)2 Way Lock Nut 1/4Hex Head Cap Screw 1/4 x 1 1/4 Gr. 5Guide Strap HTSpacer HTSpring Pin 1/2 x 2Compression SpringWasherHub FlangeShaft BearingHub Flange With HoleCross Tube Weld (Narrow Row)

24478242

12111121111

DWG. NO. 3861A

hiniker row cultivator series 6000 index new/manuals/parts...page i series 6000 row cultivator 11/10...

Documents