hiniker ar-2000 shredder parts book new/manuals...hiniker ar-2000 shredder parts book section 1 pto...

Page I

HINIKER AR-2000 SHREDDER

3/13

PART NUMBER 79202348 Rev. C

HINIKERAR-2000 SHREDDER

PARTS BOOK

SECTION 1 PTO SHAFTSSECTION 2 GEARBOXSECTION 3 HITCH ASSEMBLIESSECTION 4 BODY ASSEMBLIESSECTION 5 COMPONENT PARTSSECTION 6 OPTIONAL EQUIPMENT

It is the policy of Hiniker Company to constantly improve its products whenever it is practical to do so.

Hiniker Company must therefore reserve the right to redesign or change its equipment or component parts thereof without incurring the obligation to install or furnish such changes on the equipment previously delivered.

INSTRUCTIONS FOR ORDERING PARTS

1. The reference numbers (Ref. No.) in the illustrations correspond to the same refer-ence numbers (Ref. No.) in the description list. An assembly having a part number can be ordered. All other parts must be ordered individually. The quantity in the (Qty.) col-umn is the number of parts used in this area of the machine. The term “A/R” for number required indicates “as required” where the quantity may vary. Order all parts by their part number and description. Do not use the reference number (Ref. No.).

2. All references to left and right, front and rear apply to the machine as viewed from the rear of the machine, facing forward in the direction of travel.

3. Always mention the identification number of the model and serial numbers found on the name plate of the unit on which the part is to be used. Much delay and confusion can be avoided when correct numbers are specified on parts order and correspondence.

HINIKER COMPANY58766 240th St.P.O. BOX 3407

MANKATO, MN 56002-3407 USAPhone: (800) 433-5620

Fax: (800) 637-3991e-mail: [email protected]

PARTSPart Number 79202348 Rev. C March 2013 Parts Books/Hiniker/79202348RevC


3/13

SEC

1

SECTION 1PTO SHAFTS

PAGE 2 3-POINT HITCH PTO 1 3/8-21PAGE 3 3-POINT HITCH PTO 1 3/4-20PAGE 4 1 3/8-21 1000 RPM CV PTOPAGE 5 1 3/4-20 1000 RPM CV PTOPAGE 6 OVERRUNNING CLUTCH, 1000 RPM


3/13

3-POINT HITCH PTO 1 3/8-21

REF.NO.

PARTNUMBER DESCRIPTION QTY. REF.

NO.PART

NUMBER DESCRIPTION QTY.

123456789

10

520-03158520-03128520-03124520-03159520-03118520-03134520-03129520-03137520-03135520-03138

Yoke 1 3/8 - 21 SplineCross & Bearing KitSpring Pin 10 x 90Inboard YokeOverrunning Clutch (See Section 1 Page 6)Shield Cone 7 RibBearing RingChainScrewOuter Decal

1211122121

111213141516171819

520-03139520-03136520-03140520-03165520-03162520-03163520-03164520-03141520-03142520-02157

Inner DecalSupport BearingGrease ZerkInner ProfileInboard Yoke OuterOuter Shield TubeInner Shield TubeCollar KitCollar KitComplete PTO Shaft Assembly

111111100

DWG. NO. 2509

SEC

1

520-02157 3-Point PTO Shaft Assembly


3/13

3-POINT HITCH PTO 1 3/4-20

REF.NO.


NO.PART


123456789

10

520-03170520-03128520-03124520-03159520-03165520-03127520-03172520-03118520-03134520-03173

Yoke 1 3/4-20 SplineCross & Bearing KitSpring PinInboard YokeInner ProfileInboard YokeOuter ProfileOverrunning Clutch (See Section 1 Page 6)Shield ConeOuter Shield Tube

1221111121

111213141516171819

520-03174520-03129520-03137520-03135520-03138520-03139520-03136520-03140520-03142520-02159

Inner Shield TubeBearing RingChainScrewDanger DecalDanger DecalSupport BearingGrease ZerkCollar KitComplete 3 Point PTO Assembly

121211112

DWG. NO. 2515

SEC

1

520-02159 3-Point PTO Shaft Assembly


3/13

1 3/8-21 1000 RPM CV PTO

REF.NO.


NO.PART


123456789

1011121314

520-03119520-03120520-0312152003230520-03123520-03124520-03144520-03176520-03127520-03118520-03128520-031295200323152003232

Yoke, 1 3/8-21 SplineDouble YokeGrease ZerkInboard Yoke S4Cross & Bearing KitSpring Pin 10 x 90Inner ProfileProfile & Sleeve WeldmentInboard Yoke S5Overrunning Clutch (See Section 1, )Cross & Bearing KitBearing RingOut Shield Tube OVLIn Shield Tube Round

11111111111211

1516171819202122232425262728

520032335200323452003235520-03135520-03136520-03137520-03138520-03139520-03140520032365200323752003242520-03142520-03141

CV Cone & Bearing AssemblyShield Cone 4 RibShield Cone 7 RibScrewSupport BearingSafety ChainOuter DecalInner DecalGrease ZerkLubrication DecalCross & Bearing KitSpring Pin 10 x 75Collar Kit (In Item 10)Collar Kit (In Item 1)

11181111111111

DWG. NO. 5936

SEC

1

79202278 PTO 1 3/8-21 GKN 395564


3/13

1 3/4-20 1000 RPM CV PTO

REF.NO.


NO.PART


123456789

1011121314

520-03143520-03120520-0312152003230520-03123520-03124520-03144520-03176520-03127520-03118520-03128520-031295200323152003232

Yoke, 1 3/4-20 SplineDouble YokeGrease ZerkInboard Yoke S4Cross & Bearing KitSpring Pin 10 x 90Inner ProfileProfile & Sleeve WeldmentInboard Yoke S5Overrunning Clutch (See Section 1, Page 6)Cross & Bearing KitBearing RingOut Shield Tube OvalInn Shield Tube Round

11111111111211

15161718192021222324252627

520032335200323452003235520-03135520-03136520-03137520-03138520-03139520-03140520032365200323752003242520-03142

CV Cone & Bearing AssemblyShield Cone 4 RibShield Cone 7 RibScrewSupport BearingSafety ChainOuter DecalInner DecalGrease ZerkLubrication DecalCross & Bearing KitSpring Pin 10 x 75Collar Kit

1118111111112

DWG. NO. 5937

SEC

1

79202277 PTO 1 3/4-20 GKN 396073


3/13

OVERRUNNING CLUTCH 1000 RPM

REF.NO.


NO.PART


12345

520-03146520-03147520-03148520-03149520-03150

Clutch HousingKeyLeaf SpringSupporting RingRetaining Ring

12221

678

520-03151520-03121520-03142520-03118

Hub, 1 3/4 - 20 SplineGrease ZerkCollar KitComplete Overrunning Clutch Assembly

111

DWG. NO. 2512

SEC

1

520-03118 Overrunnig Clutch


3/13

SEC

2SECTION 2GEARBOX

PAGE 2 GEARBOX ASSEMBLY, 1000 RPM


3/13

GEARBOX ASSEMBLY, 1000 RPM

DWG. NO. 5938

REF.NO.


NO.PART


123456789

400-17205400-172065010648850106489601-05002601-02075601-05001601-03003650-06056

Casting (Tapped Holes)Casting (Thru Holes)Pinion Shaft/GearCross Shaft/GearBearing Cup (Large) #3720Bearing Cone (Large) #3782Bearing Cup (Small) #25520Bearing Cone (Small) #25581Seal (1 3/4 Shaft)

111111323

10111213141516

702-05093950-011-032203-51156203-51074203-50308601-020017920141251700216

Retaining Ring (1 3/4 Shaft)Socket Head Cap Screw 3/8-16 x 2 1/4Plug, 1/2 NPT Socket Head HexBushing, 1/2 NPT - 1/8 NPTPressure ReliefCone Timken #25580Plug 1/4 NPTGearbox Assembly

11211111

SEC

2

51700216 1000 RPM Gear Box Assembly


3/13

SEC

3

SECTION 3HITCH ASSEMBLIES

PAGE 2 TRAIL HITCH ASSEMBLYPAGE 3 3 - POINT HITCH ASSEMBLYPAGE 4 TRAIL HITCH ASSEMBLY 30 FT.


3/13

TRAIL HITCH ASSEMBLY

REF.NO.


NO.PART


123456

035-420657920099379201772031-06459952-001-009951-001-011

Cotter Pin, 1/4 x 1 3/4Hitch PinBar LevelHex Head Cap Screw 1-8 x 3 Gr. 5Lock Washer 1 InchHex Nut 1-8

422222

789

1011

7150517279201776850-001-28585501787850-001-305

Decal, “Warning”Hitch AssemblyTape-Yellow ReflectorDecal, “Caution”Tape-Red Reflector

11111

DWG. NO. 3174

SEC

3

79201775 Trail Hitch Assembly


3/13

3-POINT HITCH ASSEMBLYNOT AVAILABLE ON 30 FT. MACHINE

REF.NO.


NO.PART


123456789

101112

792033262501031979203173117-010-008117-010-009875-001-123890-001-00979200965952-002-0107920099079200964035-42064

3-Point Hitch WeldmentKlik PinLower Pin AssemblySmall SpacerLarger SpacerTop Link PinSpacerSpacer CollarFlat Washer 1 InchPTO Chain AssemblyCenter Link PinCotter Pin 1/4 x 1 1/2

142222122114

1314151617181920212223

7920088079200881034-05172950-001-147792009937920108379201081953-002-021953-005-001850-001-305850-001-28579203325

Top LinkLinkStover Lock Nut 5/8-11Hex Head Cap Screw 5/8-11 x 2 1/2 Gr. 5Lower Trail Hitch PinStand Mount WeldmentStand Tube WeldmentClevis Pin 5/8 x 3 1/2Cotter Pin .120 x 2 3/8Tape Red Reflector (Side Opposite)Tape Yellow Reflector Complete 3-Point Hitch Assembly

12221111111

DWG. NO. 2494A

SEC

3

79203325 3-Point Hitch Assembly


3/13

TRAIL HITCH ASSEMBLY 30 FT.

REF.NO.


NO.PART


123456789

1011

79203529792035458550152785501526950-001-192951-003-010950-001-1210620417920263879203434950-001-200

Trail Hitch Weldment, 30 Ft ARPTO Shaft HolderHitch CTD PPI-331-VHDouble Clevis 1 3/8Hex Head Cap Screw 3/4-10 x 5 1/2 Gr. 5Nut-Nylon Insert 3/4-10Hex Head Cap Screw 1-8 x 6 1/2 Gr. 8Nut-Nylon Insert 1”Mount PlateHose StopHex Head Cap Screw 5/16-18 x 1 1/4 Gr. 5

11111122111

1213141516171819202122

950-002-009951-005-00379203444953-001-007850-001-28585501787850-001-305951-005-064000-0406779203583953-001-010

Hex Head Flange Bolt 3/8-16 x 1Lock Nut 3/8-16 Mac LocCompression SpringCotter Pin 3/16 x 1 1/2 EP Square CutTape-Yellow ReflectorDecal CautionTape-Red ReflectorLock Nut 5/16-18, 2-WayRatchet Jack AssemblyHandle Extension1/4 x 1 1/2 EP Square Cut

22111111111

DWG. NO. 689179203546 Trail Hitch Assembly 30 FT.

SEC

3


3/13

SEC

4

SECTION 4BODY ASSEMBLIES

PAGE 2 15, 18, & 20 FT. BODY ASSEMBLYPAGE 4 25 FT. BODY ASSEMBLYPAGE 6 30 FT. BODY ASSEMBLYPAGE 8 ROTOR BEARING 2 3/16” SHAFT


3/13

15, 18, & 20 FT BODY ASSEMBLY

DWG. NO.5945

SEC

4


3/13

REF.NO.


NO.PART


123456789

1011

12131415161718192021222324252627282930313233343536373839404142

434445464748495051

000-20179000-20192000-24063952-004-067792023217920232079202318000-64011000-65186000-652237920097679201071000-65627950-003-054031-06113034-05168034-05170034-0517279202337952-001-004035-60063203-51251203-51254400-27039400-340745170021679203223

6040052460400525203-5000371505170792023297920232871504133715-03174850-001-305850-001-2857920302371504126715051717150413171504136792023417920232571505168720-02399953-001-0027920307779203259792008367920086079200866792009117920091379200914

1 3/8 Machinery BushingAdapter Fitting 1/4-28 To 1/8 NPTLock NutFlat Washer 1/2 Inch SAEV-Belt 4 Rib BandedSheave 5VL 15” DiameterCylinder Sheave 5VL 7 1/2” DiameterShield PlateSpring AnchorThreaded HandleFlipper Shield Rod (15 Ft Shredder)Flipper Shield Rod (18 Ft Shredder)Flipper Shield Rod (20 Ft Shredder)Carriage Bolt 3/8-16 x 3/4 Short Shank Gr. 5Hex Head Cap Screw 3/8-16 x 3 Gr. 5Lock Nut 3/8-16 Uni-TorqueLock Nut 1/2-13 Uni-TorqueLock Nut 5/8-11 Uni-Torque“AR-2000” DecalLock Washer 1/2 Inch1/2 x 2 3/4 Woodruff Key45° Elbow Lube Line 1/4-28 To 1/8 NPT45° Elbow 1/8 NPT To 1/8 NPTQ.D. Hub Type “E” 2” BoreJack1000 RPM Gearbox Assembly2” Spherical Bearing W/Lock CollarFlange Bearing 2 3/16” Shaft (See Page 8, Sec 4)Relube Flange W/O FittingRelube Flange W/FittingZerk 1/4-28 NPT StraightWarning DecalWasher 2 3/16 x 10 GaWasher 2 3/16 x 16 GaImportant DecalLift Here DecalTape-Red ReflectorTape-Yellow ReflectorBelt Tension DecalImportant DecalWarning DecalDanger DecalImportant DecalEnd Flipper Shield (18 Ft Shredder)End Flipper Shield (20 Ft Shredder)“Hiniker” Decal3/8 Cable ClampSquare Cut Cotter Pin 1/8 x 1” Rotor Guard WeldmentGrease DecalSplined Coupling W/FittingBearing SupportTake-Up Bar15’ Solid Line Shaft (15 Ft Shredder)18’ Solid Line Shaft (18 Ft Shredder)20’ Solid Line Shaft (20 Ft Shredder)

2A/R45222

A/R24222622

3216284

A/RA/R21144445135123321212224468

A/R222222

5253

5455

5657585960

616263646566676869

707172

73747576777879808182838485868788899091

79200920792009237920337779202287792017947920181879201820792017587920230279200967950-002-02979201793792018177920181979202331792023307150413279201780715041297150516979202299520-031387920325079202336792023357920177979201778792032497920319579203196953-001-01079201037792023047920230379202316792023017920229379201120950-001-111950-001-112950-001-301952-003-006950-001-024950-002-009950-002-010950-002-014950-003-028951-005-003792012137920121879201216

Shield RodBottom Cover (7” Wide Drive Shield)Bottom Cover (8” Wide Drive Shield)Hose Shield RH (Shown)Inside Shield Assembly (15 Ft Shredder)Inside Shield Assembly (18 Ft Shredder)Inside Shield Assembly (20 Ft Shredder)Bearing SupportBelt Idler AssemblyLower Hitch PinHex Head Flanged Whiz Lock Bolt 3/8-16 x 2Outer Shield Assembly (15 Ft Shredder)Outer Shield Assembly (18 Ft Shredder)Outer Shield Assembly (20 Ft Shredder)Shield Spacer 1/16”Shield Spacer 1/8”Warning DecalCylinder LugCaution DecalWarning DecalAR-2000 DecalOuter Decal15’ AR-2000 Body Weldment18’ AR-2000 Body Weldment20’ AR-2000 Body WeldmentRH Line ShieldLH Line ShieldRotor Assembly 5/16 Knife (15 Ft Shredder)Rotor Assembly 5/16 Knife (18 Ft Shredder)Rotor Assembly 5/16 Knife (20 Ft Shredder)Square Cut Cotter Pin 1/4 x 1 1/2Shield Assembly 1000 RpmRH Cover AssemblyLH Cover AssemblyGrease Hose 27 1/2”QD Hub SF Type 2 3/16Hose Shield LHShield BumperHex Head Cap Screw 1/2-13 x 1 1/4 Gr. 5Hex Head Cap Screw 1/2-13 x 2 Gr. 5Hex Head Cap Screw 1/2-13 x 4 1/4 Gr. 5Flat Washer 3/8 Inch SAEHex Head Cap Screw 5/8-11 x 2 1/2 Gr. 8Hex Head Flanged Whiz Lock Bolt 3/8-16 x 1 Hex Head Flanged Whiz Lock Bolt 3/8-16 x 1 1/2Hex Head Flanged Whiz Lock Bolt 3/8-16 x 1 1/4 Carriage Bolt 1/2-13 x 1 1/4Mac Lock Nut 3/8-16Rockshaft Repair Kit 15 Ft.Rockshaft Repair Kit 18 Ft.Rockshaft Repair Kit 20 Ft.

22212222224222

A/RA/R1

A/R12221111122241114214884

486

264

122052111

SEC

4


3/13

25 FT BODY ASSEMBLY

DWG. NO.6458

SEC

4


3/13

REF.NO.


NO.PART


123456789

101112131415161718192021222324252627282930313233343536373839404142434445464748495051

79203071000-20179000-24063715-03174792029367920296579202966000-64011000-65186000-6522379203081950-003-054031-06113034-05168034-05170034-051727920308279203083035-60063950-001-111203-51254400-27039400-340745170021679203223

6040052460400525203-50003951-003-0047920232979202328792030807920288979202868394-002-11579203086792030847920308579202803950-001-284850-001-305720-02399850-001-2857920181979203076792030777920083679200860792008667920307879203115

Housing Weldment 25’1 3/8 Machinery BushingLock NutLift Here DecalV-Belt 5 Rib BandedSheave 5 Groove 15 ODCylinder Sheave 5 Groove 7.5 ODShield PlateSpring AnchorThreaded HandleRod 25’Carriage Bolt 3/8-16 x 3/4 Gr. 5Hex Head Cap Screw 3/8-16 x 3 Gr. 5Lock Nut 3/8-16 Uni-TorqueLock Nut 1/2-13 Uni-TorqueLock Nut 5/8-11 Uni-TorqueRH Bracket GuardLH Bracket Guard1/2 x 2 3/4 Woodruff KeyHex Head Cap Screw 1/2-13 x 1 1/4 Gr. 545o Elbow 1/8 NPT To 1/8 NPTQ.D. Hub Type “E” 2” BoreJack1000 RPM Gearbox Assembly2” Spherical BearingFlange Bearing 2 3/16” Shaft (See Page 8 Sec 4)Relube Flange W/O FittingRelube Flange W/FittingZerk 1/4-28 NPT StraightLock Nut 1/2-20 Fine Thread, NylonWasher 2 3/16 x 16 GaWasher 2 3/16 x 10 GaMid Shield 25’Rotor Shaft WeldmentCoupler, Case HardenedO-RingBearing Support Plate WeldmentRotor Assembly 5’ BalancedRotor Assembly 7’ BalancedFlange Bearing 2 7/16 ShaftHex Head Cap Screw 1/2-13 x 4 3/4 Gr. 5Tape-Red Reflector3/8 Cable ClampTape-Yellow ReflectorOutside Shield AssemblyInside Shield AssemblyRotor Guard WeldmentSplined Coupler W/FittingsBearing SupportTake-Up Bar25’ Splined Line Shaft25’ Shaft (Keyway Both Ends)

12

102222

30242622

664114

24A/R21164665

24A/RA/R24242224834322

1622222

5253

54555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899

7920092079200923792033777920228779202293792017587920307979200967792017807920177879201779792011207920103779202304792023037920231679202301953-001-010953-001-002952-003-006952-004-067952-001-004951-005-003950-003-028950-002-014950-002-010950-002-009950-001-024950-001-301950-001-112792031057920311179203112950-008-0017150412671504131715051717150516879202337520-03138792030237920229971505169715051707150412971504133715041327920325971504136

Shield RodBottom Cover (7” Wide Drive Shield)Bottom Cover (8” Wide Drive Shield)Hose Shield RH (Shown)Hose Shield LHBearing SupportIdler AssemblyLower Hitch PinCylinder LugLH Line ShieldRH Line ShieldShield BumperShield Assembly 1000 RpmRH Cover AssemblyLH Cover AssemblyGrease Hose 27 1/2”QD Hub SF Type 2 3/161/4 x 1 1/2 Square Cut Cotter Pin1/8 x 1” Square Cut Cotter PinFlat Washer 3/8 Inch SAEStandard Flat Washer 1/2 Inch HardenedLock Washer 1/2 InchMac Lock Nut 3/8-16Carriage Bolt 1/2-13 x 1 1/4Hex Head Flanged Whiz Lock Bolt 3/8-16 x 1 1/4Hex Head Flanged Whiz Lock Bolt 3/8-16 x 1 1/2 Hex Head Flanged Whiz Lock Bolt 3/8-16 x 1Hex Head Cap Screw 5/8-11 x 2 1/2 Gr. 8Hex Head Cap Screw 1/2-13 x 4 1/4 Gr. 5Hex Head Cap Screw 1/2-13 x 2 Gr. 5Chain CouplingCoupling 1 3/4 Spline Weldment, Hardened2” Shaft Coupling Weldment, HardenedSocket Head Set Screw 3/8-16 x 3/8 Knurled CupImportant DecalDanger DecalWarning DecalHiniker Decal“AR-2000” DecalOuter DecalBelt Tension DecalAR-2000 DecalWarning DecalWarning DecalCaution DecalImportant DecalWarning DecalGrease DecalImportant Decal

222114222114111

10246898

4932174

2444822241124222222111

A/R2

SEC

4


3/13

30 FT BODY ASSEMBLY

DWG. NO.6894

SEC

4

* See Section 5, Page 5 For Hub And Bearing Information.


3/13

REF.NO.


NO.PART


123456789

10111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879

7920348279203218000-2406379203523792035287920351479203515000-6401179203512000-6522379203503950-003-054031-06113034-05168034-05170034-051727920308279203083035-60063950-001-111203-5125479203525792035245170021679203217792032196040052460400525203-50003951-003-0047920232979202328792035207920288979202868394-002-11579203086792030847920350279202803950-001-28471504132720-0239979203505034-0517579203129792030777920083679200860810045007920349979200920792033777920228779202293792017587920356779200967792017807920351679203580792011207920092579202304792023037920231679202301953-001-010953-001-002952-002-007952-004-067952-001-004951-005-003950-003-028950-002-014950-002-010950-002-009950-001-024950-001-124

Body Weldment 30 Ft. ARFlange Bearing 2” ShaftLock Nut, Grease HoseSpring Cage WeldmentV-Belt Goodyear 6/5VL794Sheave 6 Groove 5V 15 ODSheave 6 Groove 5V 7 1/2 ODShield PlateCompression SpringThreaded HandleFlipper Shield RodCarriage Bolt 3/8-16 x 3/4 Gr. 5 SSHex Head Cap Screw 3/8-16 x 3 Gr. 5Lock Nut 3/8-16 Uni-TorqueLock Nut 1/2-13 Uni-TorqueLock Nut 5/8-11 Uni-TorqueRH Bracket GuardLH Bracket Guard1/2 x 2 3/4 Woodruff KeyHex Head Cap Screw 1/2-13 x 1 1/4 Gr. 545 Degree ElbowQD Bushing Type F 2” BoreTubular Mount Jack1000 RPM Gearbox AssemblyBearing 2” SphericalFlange Bearing 2 3/16” ShaftRelube Flange W/O FittingRelube Flange W/FittingZerk 1/4-28 Tapered Thread StraightLock Nut 1/2-20 NylonWasher 2 3/16 x 16 GaWasher 2 3/16 x 10 GaRod WeldmentRotor Shaft WeldmentCoupler, Case HardenedO-Ring #139-70 Buna-NBearing Support Plate WeldmentRotor Assembly 5’ BalancedOuter Rotor Assembly 10’ BalancedFlange Bearing 2 7/16 ShaftHex Head Cap Screw 1/2-13 x 4 3/4 Gr. 5Decal Warning3/8 Cable ClampLine Shaft Shield AssemblyLock Nut 1-8Wire HolderRotor Guard WeldmentSplined Coupler W/FittingsBearing SupportRingLine Shaft, 30 Ft. ARShield RodBottom CoverHose Shield RH (Shown)Hose Shield LHBearing SupportIdler AssemblyLower Hitch PinCylinder LugHitch Pin, End TransLine Shaft ShieldShield BumperShield 1000 RPMRH Cover AssemblyLH Cover AssemblyGrease Hose 27 1/2”QD Hub SF Type 2 3/16Cotter Pin 1/4 x 1 1/2 Square CutCotter Pin 1/8 x 1” Square CutFlat Washer 5/8Flat Washer 1/2 Standard HardenedLock Washer 1/2Lock Nut 3/8-16 Mac LocCarriage Bolt 1/2-13 x 1 1/4Hex Head Flange Bolt 3/8-16 x 1 1/4Hex Head Flange Bolt 3/8-16 x 1 1/2Hex Head Flange Bolt 3/8-16 x 1Hex Head Cap Screw 5/8-11 x 2 1/2 Gr. 8Hex Head Cap Screw 1/2-13 x 4 Gr. 5

14

102222

36242826

844114

22421144445

24A/RA/R24242224814621

16221222116222124111

102

1084

168

522464

3844

8081828384858687888990919293949596979899

100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158

950-001-112951-001-008950-001-272951-003-0107920357679203518031-06212030-16132955-001-010951-005-064400-11027030-16041715041337150412979203259715-03174520-0313871505171850-001-305850-001-285715051687920233771504126715041317920354871504136952-003-010951-005-089950-001-233792033927920335179203368850-001-39685501557953-001-007792026697920341979203216850-002-669855015377920350779203436792034447920268179202368950-001-097957-001-017956-005-002956-007-02479203549950-001-166034-05173950-001-092792035597920351179203560950-001-12536100000792027257920312836100001956-008-036957-028-0118550153938809034950-001-132060756031-0600679203378956-007-023956-006-002957-001-035956-005-0017920341479203433952-002-010955-001-0027920335279203527

Hex Head Cap Screw 1/2-13 x 2 Gr. 5Hex Nut 5/8Hex Head Cap Screw 3/4-10 x 6 3/4 Gr. 5Nut-Nylon Insert 3/4-10End Trans Hitch WeldmentJack Clevis WeldmentHex Head Cap Screw 1/2-13 x 3 1/4 Gr. 5Carriage Bolt 1/2-13 x 1 1/2 Gr. 5Grease Fitting 1/8-27 NPT 90 DegreeLock Nut 5/16-18 2-WayBracketCarriage Bolt 5/16-18 x 3/4 Gr. 5Decal ImportantDecal CautionDecal GreaseLift Here DecalOuter DecalWarning DecalTape-Red ReflectorTape-Yellow ReflectorHiniker DecalAR-2000 DecalImportant DecalDanger DecalDecal Spring InstallationDecal ImportantFlat Washer 1/4 Inch SAENut 1/4-20 2-Way Gr. AHex Head Cap Screw 1/4-20 x 5/8 Gr. 5Operator Manual CanisterTire & Rim Assembly 9.5L x 15 12 PlyRim 8” x 15, 6 BoltTire ValveCylinder PinPin-Cotter 3/16 x 1 1/2 EP Square CutFront Wheel Leg AssemblyCylinder Stop WeldmentWheel Leg Assembly W/Hub9.5L x 15 Tire 8 PlyTire & Rim Assembly 9.5L 15Rear Wheel Leg Weldment (Does Not Include Hub)LatchCompression SpringPinHydraulic Cylinder 3 x 8Hex Head Cap Screw 5/16-18 x 2 1/2 Gr. 5Hose Assembly 3/8 x 72”Fitting Elbow 90 DegreesFitting Tee 3/4 ORB x 9/16 JICRear Trans Pivot WeldmentHex Head Cap Screw 3/4-10 x 2 Gr. 5Lock Nut 3/4-10 Uni-Torque Gr. BHex Head Cap Screw 3/8-16 x 1 3/4 Gr. 5Rockshaft Bearing CapBracket Pivot ClampBearing Rockshaft End TransHex Head Cap Screw 1/2-13 x 1 1/2 Gr, 5Light, Implement, LH AssemblyLight BracketLight BarLight, Implement, RH AssemblyConnector ISO Male Hydraulic 3/4 ORBHose Assembly 3/8 x 150”Safety Chain 10,000 LbHarness Lighting 30’ WindrowHex Head Cap Screw 5/8-11 x 1 3/4 Gr. 5Nut Lock 5/8-11 Nylon InsertHex Head Cap Screw 1/4-20 x 1 Gr. 5Front WeldmentFitting Tee Bulkhead 9/16 WCFitting Elbow 90 Degrees BulkheadHose Assembly 3/8 x 186”Fitting Elbow 90 Degree 9/16 JIC M x 3/4 ORBHydraulic Cylinder Control SegmentsCylinder Pin ExtendedWasher Flat 1 WRTGrease Fitting 1/4-28Tire 9.5L x 15, 12 PlyWheel Leg Assembly 30 Ft. AR

2441111242

121611

23222332211222

10212

A/RA/R24122

A/R61222444421334226411114411888122462222

SEC

4


3/13

SEC

4

DWG. NO.6736


3/13

SEC

5

SECTION 5COMPONENT PARTS

PAGE 2 KNIFE & ROTOR ASSEMBLYPAGE 3 15, 18, AND 20 FT. IDLER ASSEMBLYPAGE 3 25 FT. IDLER ASSEMBLYPAGE 4 30 FT. IDLER ASSEMBLYPAGE 4 SMV SIGN ASSEMBLYPAGE 5 TIRE, RIM & WHEEL LEG ASSEMBLY


3/13

REF.NO.


NO.PART


1234

7920229079202291950-001-322060756

SS KnifeBushing 3/4”Hex Head Cap Screw 5/8-11 x 2 3/4 Gr. 8Lock Nut 5/8-11 Nylon Insert

A/RA/RA/RA/R

5678

79202889951-003-004394-002-11579202868

Rotor Shaft WeldmentLock Nut 1/2-20 Nylon InsertO-Ring #139-70 Buna-NCoupler Case Hardened

21221

DWG. NO. 5944

KNIFE & ROTOR ASSEMBLY

SEC

5


3/13

15, 18, AND 20 FT. IDLER ASSEMBLY

DWG. NO. 5939

DWG. NO. 6480

REF.NO.


NO.PART


12345

7920308879202935725-03047952-001-005951-005-044

Pivot Idler WeldmentIdler 8 OD x 2” W x 5/8Extension SpringLock Washer 5/8 Med Split SAELock Nut 2-Way 5/8-11

12132

6789

952-003-0038100402579203089950-001-163

Flat Washer 5/8 SAEPivot BushingSpacer Idler CenterHex Head Cap Screw 5/8-11 x 5 1/2 Gr. 5

2111

REF.NO.


NO.PART


12345

7920230051599031725-03047031-06365951-005-037

Idler Weldment8” Idler PulleyExtension SpringHex Head Cap Screw 3/4-10 x 5Lock Nut 3/4-10 2-Way

11111

6789

10

033-12013400-10466951-001-009952-001-00679202310

Flat Washer 3/4SpacerHex Nut 3/4-10Lock Washer 3/4 InchSpacer 5/16 x 3/4 Conduit

12111

SEC

5

79202302 BT Idler Assembly

25 FT. IDLER ASSEMBLY

79203079 Idler Assembly


3/13

SEC

5

2

5

3

4

6

1

SMV SIGN ASSEMBLY

DWG. NO. 2521REF.NO.


NO.PART


1234

400-22083 850-001-354031-10599951-001-002

MountSMV EmblemMachine Screw #10-24 x 1/2 Slotted Round HeadHex Nut #10-24

1122

56

033-22007 715-03056 790-41218

Lock Washer #10Caution Decal Complete SMV Sign Assembly

21

790-41218 Assembly SMV And Mount

30 FT. IDLER ASSEMBLY

DWG. NO.6892

REF.NO.


NO.PART


1234

79203568792035697920357079203571

Idler WeldmentIdler Center Spacer BushingIdlerIdler Outer Spacer Bushing

1122

567

951-005-044203-50003950-001-027

Lock Nut 5/8-11 2-WayGrease Zerk 1/4-28 NPT StraightHex Head Cap Screw 5/8-11 x 6 1/2 Gr. 5

111

79203567 30 Ft. Idler Assembly


3/13

DWG. NO. 6893

TIRE, RIM, & WHEEL LEG ASSEMBLY

SEC

5

REF.NO.


NO.PART


123456789

1011121314

7920321079200827951-001-008952-001-005950-001-023850-001-164850-001-154850-003-053955-001-001950-011-006850-001-153802-000-007951-005-002953-001-017

Wheel Leg Weldment (See Drawing Above)Clamp PlateHex Nut 5/8-11 Lock Washer 5/8 Hex Head Cap Screw 5/8-11 x 2 Gr. 5Triple Lip SealCone JL69349Hub W/Wear Sleeve (Includes 16, 17, 18)Grease Fitting 1/8-27 NPT Wheel Bolt 1/2-20 x 1 Cone LM67048Flat Washer 7/8 InchSlotted Nut 7/8-14Square Cut Cotter Pin 5/32 x 1 1/2

11666111161111

1516171819

2021

2223

850-001-155850-001-159850-001-555850-001-158850-001-82879203368850-001-396805-001-154850-002-66979203513950-001-1417920321679203527

Dust CapRear Cup JL 69310Wear SleeveFront Cup LM 670105” x 15 Rim - 6 Bolt Black (Not Part Of Assembly)Rim 8” x 15”, 6-Bolt (Not Part Of Assembly)Tire Valve (Not Part Of Assembly)7.6 x 15 Tire 8 Ply9.5L x 15 Tire 8 PlySpacerHex Head Cap Screw 5/8-11 x 3 Gr. 5Wheel Leg Assembly (Includes Items 1-18)Wheel Leg Assembly (Includes Items 1-18, 22, 23) 30 Ft. Only

11111111126


3/13

SEC

6

SECTION 6OPTIONAL EQUIPMENT

PAGE 2 RATCHET JACK ASSEMBLYPAGE 2 GRASS DIVIDERPAGE 3 MANUAL END TRANSPORT KITPAGE 4 MANUAL HUB & SPINDLE ASSEMBLYPAGE 4 HYDRAULIC CYLINDER STOP BLOCK SETPAGE 5 HYDRAULIC END TRANSPORTPAGE 6 PTO SHAFT HOLDERPAGE 7 SAFETY LIGHTING FIELD USE ONLYPAGE 7 SAFETY LIGHTING END TRANSPORT/FIELD USEPAGE 8 SKID PLATE KITPAGE 9 HYDRAULIC LIFT KIT 15’, 18’, 20’, AND 25’PAGE 10 HYDRAULIC CYLINDER 2 1/2 X 8 CYLINDERPAGE 10 HYDRAULIC CYLINDER 3 X 8 CYLINDER


3/13

RACHET JACK ASSEMBLY

DWG. NO. 2502

GRASS DIVIDER

DWG. NO. 3172

REF.NO.


NO.PART


12

79201851 950-002-013

Grass Divider WeldmentHex Head Flanged Lock Bolt 1/2-13 x 1 1/2

11

34

031-06208 951-005-055

Hex Head Cap Screw 1/2-13 x 2 1/4 Gr. 5Mac Lock Nut 1/2-13

12

REF.NO.


NO.PART


1 000-04067 Complete Rachet Jack Assembly 1

SEC

6

000-04067 Ratchet Jack Assembly

79201854 Grass Divider Assembly


3/13

1

�

�

�

�

�

�

��

�

�

1�

1�

11

11

11 1�

111�

REF.NO.


NO.PART


123456

792010407920188779200977850-001-309000-20255950-001-246

Transport Tongue AssemblyFront Transport Mount WeldmentRear Transport WeldmentHitch Pin AssemblyClevis Pin AssemblyHex Head Cap Screw 1/2-13 x 7 1/2 Gr. 5

111212

789

101112

950-001-166034-05170034-05173952-003-00479201044850-001-828

Hex Head Cap Screw 3/4-10 x 2 Gr. 5UNI-Torque Lock Nut 1/2 -13 UNI-Torque Lock Nut 3/4-10 SAE Flat Washer 1/2 InchEnd Transport Spindle Assembly (Sec. 6 Page 4)5” x 15” Rim - 6-Bolt

323422

DWG. NO. 3186

MANUAL END TRANSPORT KIT15’ ALL SN

(18’ SN 2001-0011-100 AND BELOW)(20’ SN 2002-0065-100 AND BELOW)

SEC

6

1751 End Transport Kit


3/13

REF.NO.


NO.PART


1234567

79201028850-001-164850-001-154850-003-053955-001-001950-011-006850-001-153

Spindle End TransportTriple Lip SealCone JL69349Hub W/Wear Sleeve (Includes Item 12)Grease Fitting 1/8-27 NPT Wheel Bolt 1/2 - 20 x 1Cone LM67048

1111161

89

101112

802-000-007951-005-002953-001-017850-001-155850-001-55579201044

Washer 7/8 Slotted Nut 7/8-14Square Cut Cotter Pin 5/32 x 1 1/2 Dust CapWear SleeveComplete Spindle Assembly

11111

DWG. NO. 2519

MANUAL END TRANSPORT HUB & SPINDLE ASSEMBLYSEC

6

HYDRAULIC CYLINDER STOP BLOCK SET

DWG. NO. 6857

REF.NO.


NO.PART


1 79203414 Hydraulic Cylinder Stop Block Set 1


3/13

SEC

6REF.NO.


NO.PART


123456789

10111213141516171819202122

79202985792026697920335179202987792033887920297879203378792029887920236879203419957-021-001955-001-002956-007-023957-029-00379202989956-003-001921-001-144956-008-03662301179202990950-001-16579202967

Rear Wheel Leg AssemblyFront Wheel Leg AssemblyTire & Rim Assembly 9.5L-15 x 12 PlyWld, Jack ClevisEnd Trans Hitch W/Decal AssemblyRear Transport Pivot WeldmentFront WeldmentBracket, Pivot ClampHydraulic Cylinder 3 x 8 (See Sec 6 Pg 10) LionCylinder StopHose Assembly 1/4 x 54”Grease Fitting 1/4-28Bulkhead Fitting-Tee, 9/16 JICHose Assembly 1/4 x 84”Rockshaft BearingStraight Adapter 9/16 To 3/4 .297 ID14” Plastic Cable TieMale Hydraulic 3/4 ORB Connector ISOLynch Pin 5/16 x 2 3/4Rockshaft Bearing CapHex Head Cap Screw 5/8-11 x 7 1/2 Gr. 5Hitch Pin

1121111222422264825231

23242526272829303132333435363738394041424344

950-001-152060756034-05173950-001-097951-005-03679202681950-001-092951-005-051950-001-125950-001-023950-001-166034-05170921-001-490921-001-48779203524400-11027030-1604185501557953-001-007792034447920343679202686

Hex Head Cap Screw 3/4-10 x 6 Gr. 5Lock Nut 5/8-11 Nylon InsertLock Nut 3/4-10 Gr. B Uni-TorqueHex Head Cap Screw 5/16-18 x 2 1/2 Gr. 5Lock Nut 5/16-18 Mac LocPinHex Head Cap Screw 3/8-16 x 1 3/4 Gr. 5Lock Nut 3/8-16 2 WayHex Head Cap Screw 1/2-13 x 1 1/2 Gr. 5Hex Head Cap Screw 5/8-11 x 2 Gr. 5Hex Head Cap Screw 3/4-10 x 2 Gr. 5Lock Nut 1/2 Gr. B StoverGreen Cable TieRed Cable TieTubular Mount Jack 10” TravelBracketCarriage Bolt 5/16-18 x 3/4 Gr. 5Cylinder PinPin-Cotter 3/16 x 1 1/2 EP Square CutCompression SpringLatchCylinder Stop

1544824442348811224222

DWG. NO. 6858

HYDRAULIC END TRANSPORT KIT(18’ SN 2001-0012-101 AND UP)(20’ SN 2002-0066-101 AND UP)(25’ SN 2003-0001-101 AND UP)

For Bearing Info See Section 5, Page 579202993 Hydraulic End Transport Kit


3/13

SEC

6

REF.NO.


NO.PART


12345678

950-003-012951-005-051952-001-004952-004-067951-005-0367920274079202638031-06110

Carriage Bolt 3/8-16 x 2 1/4 Gr. 5Lock Nut 3/8-16 2-WayLock Washer 1/2 InchFlat Washer 1/2 InchLock Nut 5/16-18 Mac LocPTO HolderMount PlateHex Head Cap Screw 3/8-16 x 2 1/4 Gr. 5

13221112

9101112131415

792026397920343479203444950-001-200950-001-13579202739953-005-001

PTO HolderHose StopCompression SpringHex Head Cap Screw 5/16-18 x 1 1/4 Gr. 5Hex Head Cap Screw 1/2-13 x 2 3/4 Gr. 5PinHair Pin

1111211

DWG. NO. 6382

PTO HOLDER


3/13

SEC

6

SAFETY LIGHTING FIELD USE ONLY

DWG. NO. 5940

END TRANSPORT/FIELD USE SAFETY LIGHTING PACKAGE

DWG. NO. 6506

REF.NO.


NO.PART


12345

7920312479203125400-1102738809035367-001-014

Light Assembly LeftLight Assembly RightBracketLighting HarnessCable Tie, Black 8 Inch

1111

20

6789

030-1604179203129951-005-03679203128

Carriage Bolt 5/16-18 x 3/4 Gr. 5Wire HolderMac Lock Nut 5/16-18Long Light Bar

6161

REF.NO.


NO.PART


1234

36100000361000013880902879202294

Light, Implement, LH AssemblyLight, Implement, RH AssemblyHarness, LightingLight Bracket

1112

567

367-001-014031-06006951-005-089

Cable Tie, Black 8 InchHex Head Cap Screw 1 /4-20 x 1 Gr. 5Lock Nut 1/4-20, 2-Way

1288

79203126 Safety Light Package


3/13

SEC

6

SKID PLATE KIT

DWG. NO. 5941

REF.NO.


NO.PART


12

79202281950-001-029

Skid WeldmentHex Head Cap Screw 3/4-10 x 1 3/4 Gr. 5

28

3 951-005-097 Lock Nut 3/4-10 Mac-Lock 8

79202306 Skid Plate Kit


3/13

SEC

6

HYDRAULIC LIFT KIT 18’, 20’, AND 25’

DWG. NO. 5943

REF.NO.


NO.PART


123

79202351956-003-001957-022-014957-022-017

Hydraulic Cylinder 2 1/2 x 8 (See Sec 6 Pg 10)Straight Adapter 9/16 M To 3/4 M .297IDHose Assembly 1/4 x 126” (18’ & 20’)Hose Assembly 1/4 x 156” (25’)

2444

4567

956-007-023957-028-011956-008-036921-001-144

Fitting-Tee Bulkhead 9/16 JICHose Assembly 3/8 x 150”Connector ISO Male Hydraulic 3/4 ORB14” Plastic Cable Tie

2228

79202349 Hydraulic Lift Kit 18’ and 20’79203021 Hydraulic Lift Kit 25’

HYDRAULIC LIFT KIT 15’

DWG. NO. 6531

REF.NO.


NO.PART


12

79202368956-005-001

3 x 8 Cylinder Assembly (See Sec. 6, Page 10)90° Elbow

12

34

957-004-006 957-004-007

Hose Assembly 3/8 x 156” Hose Assembly 3/8 x 172”

11

79201616 Hydraulic Cylinder Package


3/13

SEC

6

REF.NO.


NO.PART


1 79202366 Seal Kit 1 2 79202351 2 1/2 x 8 Cylinder Assembly

2 1/2 X 8 CYLINDER

DWG. NO. 656779202351 2 1/2 x 8 Cylinder

REF.NO.


NO.PART


1 79202380 Seal Kit 1 2 79202368 3 x 8 Cylinder Assembly

3 X 8 CYLINDER

DWG. NO. 594979202368 3 x 8 Cylinder

hiniker ar-2000 shredder parts book new/manuals...hiniker ar-2000 shredder parts book section 1 pto...

Documents