High Speed NCM (HS-NCM)

HS-NCM Overview

Supports 200 nodes No limitations when using a DVC to page over the

network Two node addresses per HS-NCM Compatible only with Onyx series panels (8th and

9th edition) 8th edition products can only be used in retrofit

applications

HS-NCM Overview

NFN on IP based VDSL Network (Very High Data Rate Subscriber Line)•Does not use ARCnet protocol

The HS-NCM is NOT compatible with the standard NCM Noti-Fire-Net Network.

Supports NUP (Notifier Universal Protocol)Can be configured as a network repeater by setting

address to 0Installs in same single module bay as NCM

HS-NCM Overview

Each HS-NCM has:• Two NUP Ports

ONYX FACP, NCA-2, DVC, Veri-Fire Tools and/or Gateway

• Two USB Connections One Host Standard A and One On-The-Go Mini AB Veri-Fire Tools

• External Power Connection (Remote Repeater)

• Ethernet Port for Future Diagnostics

HS-NCM Part Numbers

High Speed NCM (HS-NCM) • HS-NCM-MF Multimode Fiber• HS-NCM-MFSF Multimode/Singlemode Fiber• HS-NCM-SF Singlemode Fiber• HS-NCM-W Wire• HS-NCM-WMF Wire/Multimode Fiber• HS-NCM-WSF Wire/Singlemode Fiber• HS-GW-EM Embedded Gateways

BACNET-GW-3NWS-3NFN-GW-EM-3

VDSL Data Rate 12Mb (Variable 3Mb-24Mb Future)

Supports twisted pair wire• 18AWG- 14AWG•Maximum Distance 3,000 ft.

NFPA Style 4 (Class B) or Style 7 (Class A)

Data is regenerated at each node

HS-NCM-W

HS-NCM-W

Channel A Connection

Channel B Connection

Ground Fault Detection Switches S1 = CH A S2 = CH B

USB Connections

NUP Ports

External Power

Connection

HS-NCM-W Wire Requirements

MUST be Twisted Pair Prefer a Data Grade Cable (Belden) Non-Shielded Wire for High Speed Communications 200 Nodes at 3,000’

• Belden 5320UJ 18/2 FPL• Belden 5320UM 18/2 FPLR• Genesis 4050 18/2 FPL• Genesis 4631 18/2 FPLP• Genesis 4433 14/2 FPLR• Genesis 4633 14/2 FPLP

HS-NCM-W Wire Requirements

200 Nodes at 2,000’• Genesis 4431 18/2 FPLR

200 Nodes at 1,000’• Genesis 5500 18/2 FPLR• Genesis 5502 16/2 FPLR• Belden 5220UM 16/2 FPLR

200 Nodes at <1,000’• Genesis 5504 14/2 FPLP

This cable did not pass the test for 200 nodes at distances even less than 1,000’ and therefore should not be used as a network segment cable

HS-NCM-MF (Multi-Mode Fiber)

Data Rate of 100Mb Supports Fiber Optic Cable

• 62.5/125 10dB Limit• 50.0/125 6.5 dB Limit

NFPA Style 4 (Class B) or Style 7 (Class A)

Data is regenerated at each node

Fiber Connectors: LC Style

HS-NCM-SF (Single-Mode Fiber)

Data Rate of 100Mb Supports Fiber Optic Cable

• 9/125 30dB Limit NFPA Style 4 (Class B) or

Style 7 (Class A) Data is regenerated at each

node Fiber Connectors: LC Style

HS-NCM-SF (Single-Mode Fiber)

NO CONVERTERS REQUIRED !!!

Previous singlemode fiber segment required two NCM-F, two 14507714-001 singlemode converters and mounting kit.

HS-NCM Hybrids (Wire to Fiber)

HS-NCM-WSF HS-NCM-WMF

Multi-Mode fiber to Single-Mode fiber converter not shown

ONYXWorks™

Intel 2.0 GHz Pentium IV microprocessor

1 GB RAM80 GB hard drive1.44 MB floppy drive24/10/40X CD-RW drive19” Flatscreen LCD monitor

Microsoft Windows XP

HS-NCS

High Speed ONYXWorks•ONYXWORKS-HNMF (High Speed NFN Multi-mode Fiber)

•ONYXWORKS-HNSF•ONYXWORKS-HNW

High Speed card for ONYXWorks Add-On (Upgrade current ONYXWorks)•NFN-GW-PC-HNMF•NFN-GW-PC-HNSF•NFN-GW-PC-HNW

HS-NCS Cards for ONYXWorks

HS-NCS-MFHS-NCS-SF

HS-NCS-W

• NOT compatible with the NCS Workstation

For ONYXWorks only

HS-NCM Applications

NUP NUP

USB USB

NFN NFN

HS-NCM2 Node

Addresses

HS-NCMHS-NCM

Veri-Fire Tools

100

DVC,NCA-2,Gatewayor another FACP

HS-NCM Applications

NUP NUP

USB USB

NFN NFN

HS-NCM1 NodeAddress

HS-NCMHS-NCM

Veri-Fire Tools200

Veri-Fire Tools

(either/or connection)

HS-NCM USB Limitations

USB connection for the HS-NCM is NOT supported on the fire panels until the following releases:• NFS2-3030 Release 14.1• NFS2-640/NFS-320 Release 15.0

USB Connections not supported on NFS-640 or NFS-3030

Do not use the USB Mini On-The-Go connection on the fire panel