hama manual
TRANSCRIPT
-
8/22/2019 Hama Manual
1/21
00057184/03.
07
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted,
and subject to technical changes. Our general terms of delivery and payment are applied.
PO Box 80 86651 Monheim/Germany
Phone: +49 9091 502-0Fax: +49 9091 502-458
http://www.hama.com
-
8/22/2019 Hama Manual
2/21
Wireless Stereo Headset
BSH-240Wireless Stereo Headset
Oreillette Wireless stro
C O M P U T E R
00057184
-
8/22/2019 Hama Manual
3/21
2
Einfhrung
Gerteeigenschaften 2Gertefunktionen 2Packungsinhalt 3Beschreibung der Einzelteile 3Tragen des Headsets 4Einlegen / Entfernen des Akkus 4Aufladen des Akkus 4Informationen zum Akku 4Ein- und Ausschalten des Headsets 4Kopplung des Headsets mitBluetooth-Gerten (Handy, PDA) 5Einen Anruf mit dem Headset ttigen 5Einen Anruf mit dem Headset empfangen 5Fernbedienung 5Das Headset erneut mit einem zuvorverbundenen Gert verbinden 6Scatternet-Verbindung 6Headset-Firmware aktualisieren 6Technische Daten 6Liste der LED-Anzeigen undTastenfunktionen 7
Sicherheitshinweise Verwenden Sie das Bluetooth Stereo Headset niemals
beim Autofahren. Beachten Sie die gesetzlichen Bestimmungen zur
Nutzung von Mobiltelefonen und Freisprechzubehrdes jeweiligen Landes.
Dauerhaftes lautes Musikhren kann zu Hrschden fhren. Die Verwendung eines anderen Akkus als des
vorgesehen Hama-Akkus kann zu Schden,Leistungsverlust, Verletzungen, Stromschlag und sogarzu Brnden fhren.
Berhren Sie niemals Kabel oder Stecker mit nassenHnden und wenden Sie beim Ziehen an Kabel oderStecker keine Gewalt an.
Bitte lesen Sie die Sicherheitshinweise zur
Verwendung der Akkus. Verwenden Sie zum Reinigen keine kratzendenGegenstnde und keine Scheuer- oder Lsungsmittel,da diese die Oberflche dauerhaft schdigen knnten.
Laden Sie den Akku mindestens 2 Stunden vor Gebrauch. Verwenden Sie das Headset nicht in Krankenhusern,
Flugzeugen usw., wo die Verwendung elektronischerGerte untersagt ist.
Setzen Sie das Gert nicht direktem Sonnenlicht,extremen Temperaturen, Feuchtigkeit oderErschtterungen aus
EinfhrungVielen Dank, dass Sie sich fr dieses Bluetooth-Headset vonHama entschieden haben.
Das Hama Bluetooth-Headset BSH-240 ist ein hochwertigeskabelloses Audiogert fr hchsten Musikhrgenuss undbeste Sprachbertragung bei voller krperlicher Bewe-gungsfreiheit.
Angeschlossen an Bluetooth-fhige Audiogerte wie Mo-biltelefone, Computer usw. kann es sowohl als drahtloserKopfhrer wie auch als Freisprechkpfhrer eingesetztwerden.
Wir wnschen Ihnen viel Vergngen bei der Verwendungder einzigartigen Drahtlosfunktionen von Hama
Gerteeigenschaften Sound in CD-Qualitt und beste Sprachqualitt
Untersttzung von A2DP SBC und MP3 fr Stereo-Audio-Streaming Untersttzung der Freisprech- und Kopfhrerprofile
von Bluetooth-Telefonen. Untersttzung von AVRCP fr die Fernbedienung von
Musikabspielfunktionen vom Kopfhrer aus. Abnehmbares Mikrofon Faltbarer Headset-Bgel Ergonomisches, schwungvolles Design Kompakter, wiederaufladbarer und leistungsstarker
Li-Polymer-Akku fr lange Nutzungszeiten. Laden des Akkus ber USB-Anschluss oder Steckdose.
d Bedienungsanleitung
-
8/22/2019 Hama Manual
4/21
3
GertefunktionStereo-Kopfhrer fr Bluetooth-Gerte mit A2DP-Untersttzung (Advanced Audio Distribution Profile).
Freisprechkopfhrer fr Bluetooth-Telefone
Packungsinhalt
Bluetooth Stereo Headset
Netzteil
Akku
Mikrofon
USB Kabel
Bedienungsanleitung
Hinweis:Die Abbildungen in diesem Handbuch dienen nur zurIllustration.
Beschreibung der Einzelteile
Vol +
LED
Multifunktions-taste
Vol - USB Anschluss
Ein-/Ausschalter
Mikrofon
Headset-Bgel
Akku Pack
Akku-Auswurftaste
-
8/22/2019 Hama Manual
5/21
4
Tragen des Headsets
Platzieren Sie den Kopfhrer so, dass der Bgel hinter demKopf verluft und die Ohrbefestigungen ber den Ohren
liegen.
Einlegen/Entfernen des Akkus
To remove, press the Battery Ejector button.
Aufladen des Akkus
Laden Sie den Akku vor dem ersten Gebrauch mindestens2 Stunden lang.
Stecken Sie bei eingesetztem Akku ein Ende des Netzteils ineine Steckdose und das andere Ende in den USB-Anschlussdes Kopfhrers.
Der Akku kann auch geladen werden, indem der Kopfhrerber das USB-Kabel mit dem USB-Anschluss einesComputers verbunden wird.
Informationen zum Akku Ladezustandsanzeige: Der Ladezustand ist anhand der
LED-Farbe ablesbar. Bei niedrigem Batteriestand blinkt dieLED sekndlich rot auf.
LED-Farbe: Whrend des Ladens - rot,voller Ladestand - blau
Ladezeit: < 3 Stunden (Die Ladezeit ist vom Ladezustandabhngig)
Haltbarkeit des Akkus: Standby > 200 Std.,Audio-/Sprachverbindung: > 12 Std.
Da Akkus zu den Verbrauchskomponenten zhlen, ver-krzt sich die Leistungsdauer im Laufe der Zeit. Erwerben
Sie einen neuen Akku, wenn die Leistungsdauer deutlichabgenommen hat. Lassen Sie den Akku nicht fallen, setzen Sie ihn keinen
mechanischen Krften aus, und nehmen Sie ihn nichtauseinander, da dies zu Schden oder berhitzungfhren kann.
Bewahren Sie den Akku nicht in der Nhe von Hitze-quellen oder Mikrowellengerten auf, da er sonstexplodieren kann.
Nicht in Reichweite von Kindern aufbewahren. DieVerwendung schadhafter Akkus sowie der Kontakt mitder Mundschleimhaut knnen gesundheitsschdlich sein.
Sollte Sie in Kontakt mit ausgetretener Akku-Flssigkeitkommen, splen Sie die betroffenen Stellen 1-2 Minuten
unter flieendem Wasser ab. Verwenden Sie den Akku nicht mit anderen Gerten, da
dies zu Schden fhren kann.
Ein- und Ausschalten des Headsets Einschalten: ON/OFF drcken und 3-4 Sekunden lang
gedrckt halten bis die LED schnell blau aufblinkt. Dannloslassen.
Ausschalten: ON/OFF drcken und 3-4 Sekunden langgedrckt halten bis die LED schnell rot aufblinkt. Dannloslassen.
Platzieren Sie zum Einsetzen die Erhebung des Akkus in derVertiefung des Kopfhrers. Sobald die Kontakte des Akkusund des Kopfhrers sich berhren, drcken Sie den Akku an,um ihn vollstndig einzurasten.
Drcken Sie zum Entfernendie Akku-Auswurftaste.
-
8/22/2019 Hama Manual
6/21
5
Kopplung des Headsets mit Bluetooth-Gerten (Handy, PDA) Stellen Sie vor dem Koppeln des BSH-240-Headset mit
einem Bluetooth-Gert sicher, dass das andere Gert eineder folgenden Funktionen untersttzt. A2DP, AVRCP, Freis-prech- und Kopfhrerprofile.
Drcken Sie bei eingesetztem Akku gemeinsam dieTastenVol Up & ON/OFF und halten Sie sie fr 4 Sekun-den gedrckt. Lassen Sie die Tasten los, wenn dieLED abwechselnd rot und blau zu blinken beginnt. DieLED blinkt dann weiterhin rot und blau. Dieser Kop-plungsmodus hlt eine Minute lang an. Erfolgt innerhalbdieses Zeitraums keine Kopplung zwischen den Gerten,
kehrt das Headset in den Standby-Modus zurck. Schlieen Sie die Kopplung des Bluetooth-Gerts mithilfeder Tasten oder Mens ab. (Beachten Sie dazu die jewei-lige Bedienungsanleitung, da der Vorgang von Gert zuGert unterschiedlich sein kann). berprfen Sie, dassdas BSH-240 oder eine entsprechende Bluetooth-Adressein der Liste der zu suchenden Gerte enthalten ist. Wirddas Gert nicht gefunden, wiederholen Sie den Vorgang.
Wenn Sie zur Eingabe des PIN-Codes aufgefordert wer-den, geben Sie 0000 ein. Dies ist der voreingestellte PIN-Code fr BSH-240 Stereo Bluetooth Headset.
Einen Anruf mit dem Headset ttigen Stellen Sie sicher, dass sich Headset und Handy im
Verbindungsmodus befinden, und dass das Mikrofon inden USB-Anschluss des Headsets eingesteckt ist. Um ein Gesprch zu fhren, whlen Sie die gewnschte
Nummer mit dem Handy. Wenn Sie den Whlton hren,drcken Sie einmal die Multifunktionstaste, um das Ge-sprch an das Headset zu bergeben.
Um das Gesprch zu beenden, drcken Sie einmal die TasteON/OFF. Bei Mobiltelefonen, die nur ber ein Headset-Profilverfgen, kann das Gesprch sowohl mit der Multifunktions-
taste wie auch mit der ON/OFF-Taste beendet werden. Bei Bluetooth-Telefonen, die ber ein Freisprechprofil
verfgen, fhrt ein langes Drcken der Multifunktions-taste zur Wahlwiederholung der letzten empfangenenoder gewhlten Nummer.
Zur Wahlwiederholung whrend des Musikhrens ber einA2DP-Gert, drcken Sie lang auf die Multifunktionstaste.
Hinweis: Diese Funktion wird nicht von allen Telefonenuntersttzt. Der Vorgang der Wahlwiederholung kannje nach Gert abweichen. Bei einigen Telefonen wirddurch das lange Drcken der Multifunktionstaste zuerstdie Liste der zuletzt gewhlten und empfangen Nummernangezeigt. Bei anderen Telefonen erfolgt direkt die Wahl-wiederholung der zuletzt empfangenen oder gewhltenNummer. Bei einigen anderen Telefonen wird dieSprachwahl aktiviert.
Wenn Sie eine Sprachwahl durchfhren wollen,stellen Sie zunchst sicher, dass Ihr Telefon dieseFunktion untersttzt, dass sie aktiviert ist, und dass Voice-Tags gespeichert sind. Drcken Sie im Freisprechmoduseine Sekunde lang die ON/OFF-Taste.
Um whrend eines Gesprchs ein Dreiergesprch zufhren, drcken Sie kurz die Multifunktionsfunktionstaste,um das zweite Gesprch anzunehmen. Um zwischen demersten und zweiten Gesprch und umgekehrt zu wech-seln, drcken Sie kurz die Multifunktionstaste.
Hinweis: Zur Nutzung dieser Funktion mssen Sie beieinem entsprechenden Dienst angemeldet sein.
Einen Anruf mit dem Headset empfangen Um einen Anruf empfangen zu knnen, mssen sich
Headset und Handy im Verbindungsmodus befinden unddas Mikrofon muss in den USB-Anschluss des Headsetseingesteckt sein.
Bei einem eingehenden Gesprch, luten sowohl dasHeadset wie auch das Handy und die LED des Headsetsblinkt schnell blau auf. Das Gesprch kann ber dasTelefon angenommen werden oder durch einmaligesDrcken der Multifunktionstaste ber das Headset.
Bei Mobiltelefonen, die nur ber ein Headset-Profilverfgen, wird die ON/OFF-Taste zum Annehmen einesGesprchs verwendet.
Um das Gesprch zu beenden, drcken Sie einmal die Taste
ON/OFF. Bei Mobiltelefonen, die nur ber ein Headset-Profilverfgen, kann das Gesprch sowohl mit der Multifunktion-staste wie auch mit der ON/OFF-Tastebeendet werden.
Wenn der Gesprchspartner das Gesprch beendet, gehtdas Headset automatisch in den Standby, ohne dass Siedas Gesprch mit der ON/OFF-Taste beenden mssen.Um ein Gesprch abzuweisen, drcken Sie kurz dieON/OFF-Taste.
Fernbedienung Das Headset kann zur Fernbedienung von Abspielfunk
tionen genutzt werde, wenn das Headset mit einem Audio-Gert verbunden ist, das A2DP und AVRCP untersttzt. Zum Abspielen des nchsten Titels drcken Sie die Taste
Vol Up und halten Sie sie eine Sekunde lang gedrckt. Zum Abspielen des vorherigen Titels drcken Sie dieTaste Vol Down und halten Sie sie eine Sekunde langgedrckt.
Fr die Funktion Pause drcken Sie die Multifunktionstaste MFB whrend des Abspielens einmal.
Um das Abspielen fortzusetzen, drcken Sie die Multifunktionstaste MFB erneut einmal.
Fr die Funktion Stop drcken Sie die Taste ON/OFFwhrend des Abspielens einmal.
Fr die Funktion Replay, drcken Sie dieMultifunktionstaste MFB einmal.
-
8/22/2019 Hama Manual
7/21
6
Das Headset erneut mit einem zuvor verbundenen Gertverbinden
Wenn das Headset bereits mit einem Bluetooth-Telefon,-PDA oder -Computer gekoppelt und verbunden wurde,kann es per Tastendruck erneut mit diesem Gertverbunden werden.
Stellen Sie sicher, dass die Bluetooth-Funktion desanderen Gertes eingeschaltet wurde.
Um eine erneute Verbindung mit dem Freisprechprofilherzustellen, schalten Sie das Headset ein. Daraufhin wirdautomatisch eine Verbindung mit dem Freisprechprofilhergestellt.
Wenn Sie eine erneute Verbindung mit A2DP herstellenmchten, um Musik zu hren, drcken Sie kurz die Multi-funktionstaste. Daraufhin wird eine Verbindung mit A2DPhergestellt. Drcken Sie zum Abspielen von Musik erneut
die Multifunktionstaste.Scatternet-Verbindung Scatternet-Verbindung bedeutet, dass ein Bluetooth-Gert
in der Lage ist, gleichzeitig mit zwei Gerten verbunden zuwerden, also beispielsweise die gleichzeitige Verbindungdes Headsets mit einem Bluetooth-Telefon und einemUSB-Dongle.
Das oben genannte Szenario ist nur mglich, wenn dasBluetooth-Telefon sowohl Freisprech- wie auch Kopfhr-erprofile untersttzt. Eine Scatternet-Verbindung kannnicht mit Bluetooth-Telefonen hergestellt werden, dieA2DP untersttzen, da A2DP- fhige Telefone sowohlA2DP wie auch Freisprech- wie auch Kopfhrerprofileber das Headset verfgbar machen.
ber eine Scatternet-Verbindung knnen Sie von einemBluetooth-Telefon eingehende Anrufe annehmen, whrendSie gleichzeitig ber ein anderes Audio-Gert, wie einen miteinem USB-Dongle verbundenen Computer, Musik hren.
Zum Herstellen einer Scatternet-Verbindung koppeln undverbinden Sie zuerst das Headset mit dem Bluetooth-Telefon, um die Kopplungsinformationen fr das Headsetim Telefon zu speichern.
Als nchstes trennen Sie das Headset vom Telefon undkoppeln das Headset mit dem anderen Gert, beispiels-weise mit dem Computer per USB-Dongle.
Bei Kopplung und Verbindung mit dem Computer per A2DPstellen Sie eine Verbindung zwischen Headset undBluetooth-Telefon (Sprachverbindung) vom Telefon ausher. Jetzt ist das Headset mit dem Computer per A2DP(Stereo) verbunden und mit dem Telefon ber SCO(Sprache).
Bei einem eingehenden Anruf bei gleichzeitigem Audio-Stream vom Computer wird die Musik unterbrochen undes folgt der Klingelton. Drcken Sie zum Annehmen desGesprchs einmal die Multifunktionstaste.
Um das Gesprch zu beenden, drcken Sie einmal die TasteON/OFF. Wenn der Gesprchspartner das Gesprch been-det, brauchen Sie die Taste ON/OFF nicht zu drcken. Wenn
das Gesprch beendet ist, spielt automatisch wieder Musik.Headset-Firmware aktualisieren Um das bestmgliche Zusammenspiel zwischen Blue-
tooth-Gerten sicherzustellen, steht beim BSH-240 eineUSB-Schnittstelle fr das Aktualisieren der Firmware zurVerfgung.
Eine Anleitung fr das Aktualisieren der Firmware desBSH-240 finden Sie auf unserer Website www.hama.com,von der Sie auch das Programm fr den FirmwareUpgrade und das Handbuch herunterladen knnen..
Technische Daten
Standard Bluetooth-Spezifikation V 1.2
RF Frequenzbereich 2402 ~ 2480 MHz
Untersttzte Profile A2DP, AVRCP, Freisprechen,Kopfhrer
Sendeleistung 0.25 ~ 2.5mW (Klasse 2)
Empfnger-empfindlichkeit < -80dBm (PER 1%)
Entfernung 10m (im Freien)
Audio-Frequenz- 20 Hz ~ 22 kHzbereich
Rauschabstand > 80dB
Klirrfaktor (THD) < 0.1%
Audio Ausgangsleist. > 20m Wrms
Haltbarkeit des Standby > 200 hrsAkkus Audio- oder Sprachverb. > 12 Std.
Ladezeit < 3 Std.
Netzadapter Eingang AC 90 ~ 250V
Gewicht 76g (einschl. Akku)
Betriebstemp. & -10 ~ +50 C,rel. Feuchtigkeit rel. Feuchtigkeit 0 ~ 95%
Taste Vol Up fr Lauter und
berspringen
Taste Vol Down fr Leiser undVorherige Titel
Multifunktionstastefr Pause
und Replay
ON/OFF Taste frStop
-
8/22/2019 Hama Manual
8/21
7
Liste der LED-Anzeigen und Tastenfunktionen
Wiedergabe 'MFB' kurz drcken
A2DP-Verbindung Nchster Titel 'VOL UP' 1 Sekunde lang drcken und
mit einem PC oder gedrckt halten
A2DP-fhigem Vorheriger Titel 'VOL DOWN' 1 Sekunde lang drcken
Gert und gedrckt halten
Pause 'MFB' einmal kurz drcken
Stop 'ON/OFF' einmal kurz drcken
Lautstrke + 'VOL UP' einmal kurz drcken
Lautstrke - 'VOL DOWN' einmal kurz drcken
Verbunden Bei Verb. mit einem anderen Bluetooth-Gert Aus
Handsfree Nicht verbunden od. Aktiv aber nicht mit einem anderen Blaues Blinken fr 3 Minuten
Operation with im ruhenden Zustand Bluetooth-Gert verbunden und danach aus
Bluetooth phone Akku leer Schwaches Blaues od. Rotes Blinken
Laden Im Ruhemodus (bei Nichtgebrauch) Rot mit regelm. blauen Blinken
Laden Im Verbindungsmodus (bei Gebrauch) Dauerhaft Rot
Laden Vollstndig Blaues Blinken
BSH-240 MODUS AKTION LED-ANZEIGE/Anmerkungen
Kopplung 'VOL UP' und ' ON/OFF' zusammen Langsames rotes und blaues Blinken
4 Sekunden lang drcken
Einschalten 'ON/OFF' 4 Sekunden lang drcken Schnelles blaues Blinken
Grundfunktionen Ausschalten 'ON/OFF' 4 Sekunden lang drcken Schnelles rotes Blinken
Anruf annehmen 'MFB' einmal drcken Schnelles blaues Blinken u. Klingelton
Anrufen 'MFB' nach dem Wahlton einmal drcken
Anrufen whrend 'MFB' lang drcken Abhngig vom Telefon. DieseFunktion
des Musik hrens wird nicht von allen Tel. untersttzt.Freisprech- Gesprch beenden 'ON/OFF' einmal drcken
funktionen im Anruf ablehnen 'ON/OFF' einmal kurz drcken
Betrieb mit Wahlwiederholung 'MFB' lang drcken
Bluetooth- Sprachwahl 'ON/OFF' einmal kurz drcken Im ruhenden Freisprechmodus
Telefon 'MFB' kurz drcken, um das Gesprch
Dreiergesprch anzunehmen und um zwischen den
Gesprchsteilnehmern zu wechseln
Lautstrke + 'VOL UP' einmal kurz drcken
Lautstrke - 'VOL DOWN' einmal kurz drcken
BSH-240 MODUS AKTION LED-ANZEIGE/Anmerkungen
-
8/22/2019 Hama Manual
9/21
8
Contents
Safety Instructions 9
Introduction 9
Product Features 9
Product Functions 10
Whats included in the Package 10
Description of Parts 10
Wearing the Headset 11
Mounting / Removing battery 11
Charging the battery 11
Battery Information 11
Switching the Headset ON/OFF 11
Pairing Headset with Bluetooth Devices
(Phone, PDA) 12
Using the Headset to Make a Call 12
Using the Headset to Answer a Call 12
Remote Control Function 12
Reconnecting Headset with Previously
Connected Device 13
Scatternet Connection 13
Upgrading Headset Firmware 13
Specifications 13
Summary of LED Indication andButton Presses 14
Safety Instructions Never use the Bluetooth Stereo Headset while driving. Check the laws and regulations on the use of mobile
phones and handsfree equipments in areas you intendto use.
Continuous listening of music at high volume maycause hearing defects.
Use of non-hama batteries may result in damage,performance degradation, injury, electric shock andeven fire.
Never touch the electric cord or plug with wet handsand never use force to pull the cord or plug.
Please read the precautions on the use of battery. When cleaning, do not use any type of abrasive pad,
scouring powder or solvents as these may render thefinish dull permanently.
Charge the battery for at least 2 hours before using. Do not use in places like hospitals, airplanes etc.
where use of electronic devices is prohibited. Do not expose components to the extremes of sunlight,
temperature, moisture or vibrations.
Introduction
Thank you for purchasing our hama Bluetooth-Headset.
hama Bluetooth-Headset BSH-240 is a high qualitywireless audio device that provides users with audioentertainment and voice functions at its best while givingcomplete freedom from physical wires.
It functions as Wireless Stereo Headphone when linkedto Bluetooth-enabled audio devices such as MobilePhones, PCs etc. and as Handsfree Headset withBluetooth Phones or PC.
We hope you enjoy the unique wireless features providedby hama.
Product Features CD Quality Sound and High Quality Voice
Supports A2DP SBC, MP3 for stereo audio streaming Supports Headset / Handsfree profiles for handsfree
operation with Bluetooth phones Supports AVRCP for Remote Controlling of music
playback functions from Headphone Detachable Microphone Collapsible and Fashionable Neckband Ergonomic and Dynamic Design Compact, Rechargeable, High Density Li-Polymer
battery for long lasting play Charging via USB or Power Supply
d Bedienungsanleitungg Operating Instruction
-
8/22/2019 Hama Manual
10/21
9
Product FunctionsStereo Headphone for Bluetooth Devices SupportingA2DP (Advanced Audio Distribution Profile)
Handsfree Headset for Bluetooth PhonesWireless Headset for PC using Audio Streamer
Whats included in the Package
Bluetooth Stereo Headset
AC/DC Adapter
Batterie
Microphone
USB Cable
Manual
Note :Images seen in this manual are for illustrations only andsizes and colors of actual product may not be the same
Description of Parts
Vol Up
LED
MFB
Vol Down USB Port
On/Off
Microphone
Neckband
Battery Pack
Battery Ejector Button
-
8/22/2019 Hama Manual
11/21
10
Wearing the Headset
Place the Headset such that the neckband goes behind
the head and the ear hangers rest over the ears.
Mounting/Removing battery
To remove, press the Battery Ejector button.
Charging the battery
Charge battery at least 2 hours before use at the time ofpurchase
With battery mounted onto Headset, plug one end ofAC/DC adapter into AC power supply and the other intoUSB port of Headset.
Battery can also be changed by connecting Headset toUSB port of PC using the USB cable.
Battery Information Battery Level Indicator: Battery level can be checkedby color of LED. When battery level is low, LED flashesred every second.
LED color : During charging - Red, Fully charged - Blue Charging time : < 3hours
(Charging time varies with battery level) Battery Life : Standby > 200hrs, Audio /Voice
Connection : >12 hrs
Because of its consumable nature, battery life cyclegradually degrades over time. Purchase new battery ifbattery life has degraded significantly.
Do not drop battery, subject it to force or disassembleit as it may result in damage or overheating.
Do not place battery near burner or microwave oven asit may explode.
Keep away from the reach of children. Can beharmful when damaged battery is used or if placed inthe mouth.
When exposed to battery liquid, clean the exposedarea under running water for 1-2 minutes.
Do not use the battery with other devices as it maycause damage.
Switching the Headset ON/OFF
To switch on the Headset, click and hold ON/OFF for 3-4
seconds until LED flashes blue rapidly and then releasebutton.
To switch off the Headset, click and hold ON/OFF for 3-4seconds until LED flashes red rapidly and then releasebutton.
To mount battery, place hook of battery into groove ofHeadset and when the terminals of battery and Headset are
touching, press battery downwards to lock completely.
-
8/22/2019 Hama Manual
12/21
11
Pairing Headset with Bluetooth Devices (Phone, PDA)
Before pairing the BSH-240 Headset with BluetoothDevices, please make sure the host device supports anyof the following profiles : A2DP, AVRCP, Headset/Hands-free profiles.
With battery mounted onto Headset, click and hold VolUp & ON/OFF buttons together for more than 4 seconds.When LED starts to flash red and blue alternately, re-lease the two buttons. LED will then flash red and bluecontinuously. This pairing mode will last for 1 minute andif no pairing is made within this period, the Headset will
return to standby mode. Manipulate the buttons or menus of Bluetooth device
to complete pairing (Refer to devices manual as theinstructions may differ from device to device). Checkif the BSH-240 or corresponding Bluetooth Address isdisplayed in the list of searched devices. If device is notfound, repeat pairing procedure.
When prompted to enter pinkey, enter 0000 which is thefixed pinkey for BSH-240 Stereo Bluetooth Headset.
Using the Headset to Make a Call
Make sure Headset and mobile phone are in connectionmode and microphone plugged into USB port of Head-
set. To make a call, dial from the mobile phone and when dial
tone is heard, click MFB once to switch over to Head-set.
To end a call, press ON/OFF button once. For mobilephones supporting headset profile only, either MFB orON/OFF button may be used to end call.
For Bluetooth phones that support Handsfree Profile,clicking the MFB button in a long manner will activate thephone to redial to the last number received or called.
To redial while listening to music from an A2DP device,long click MFB.
Note : Some phones do not support this feature. For re-dialing, the procedures may differ from one device toanother. For some phones, clicking the MFB in a longmanner will first activate the phone to display the list ofthe last numbers received or called. For others, clickingthe MFB in a long manner will redial to the last numberreceived or called directly. And again on others it willactivate Voice dialing.
To voice dial, make sure your phone supports voice dial-ing and that it is activated and voice tags have been re-corded. Press the ON/OFF button for one second in idlehandsfree mode.
To make a 3 way call, while on a call, short click MFB toanswer second call. To switch from second call to firstcall and vice versa, short click MFB.
Note : This function can only be used if user has sub-scribed for such service.
Using the Headset to Answer a Call
To be able to answer a call, the Headset and mobilephone must be connected and microphone plugged intoUSB port of Headset.
On an incoming call, bell will ring from both Headset andmobile phone and LED on Headset will flash blue rapidly.Call can be answered from phone or from Headset bypressing MFB once.
For mobile phones supporting only headset profile, theON/OFF button is used to answer incoming call.
To end call, press ON/OFF button once. For mobilephones supporting only headset profile, either MFB orON/OFF button may be used to end call.
If the other party ends the call first, Headset will auto-matically enter into standby mode without the user hav-ing to press ON/OFF button to end the call.
To reject call, short click ON/OFF button.
Remote Control Function
Headset can be used to remote control playbackfunctions if Headset is connected to audio devicesupporting A2DP and AVRCP.
To play Next song, click and hold Vol Up button for1 sec.
To play Previous song, click and hold Vol Down
button for 1 sec. To Pause, click MFB once during play. To Resume, click MFB once in Pause mode. To Stop, click ON/OFF button once during play. To Replay, click MFB once.
-
8/22/2019 Hama Manual
13/21
12
d Bedienungsanleitung
Vol Up button forVolume Up andSkip functions
Vol Down button for Volume Downand Previous
MFB for Pauseand Replayfunctions
ON/OFF button forStop function
Reconnecting Headset with Previously Connected
Device If the Headset has been paired and connected withBluetooth Phone, PDA or PC, then it can be reconnect-ed to the previously connected device via button press.
Make sure the Bluetooth function of the device to bereconnected has been powered on.
to reconnect to handsfree profile, simply power onheadset and it will automatically connect to handsfreeprofile.
to reconnect to A2DP for listening to music, short clickMFB and it will connect to A2DP. To play music, shortclick MFB once again.
Scatternet Connection
Scatternet connection refers to the ability of oneBluetooth device to connect to two devices simultane-ously. This means for instance connecting the Headsetto Bluetooth phone and USB dongle at the same time.
The above scenario is only possible if the Bluetoothphone supports headset and/or handsfree profiles.Scatternet connection cannot be realized with Blue-tooth phones supporting A2DP because A2DP enabledphone will make use of both A2DP and Headset/Hands-free profiles available from headset.
Via scatternet connection, you can answer incomingcall from a Bluetooth phone while listening to musicfrom another audio device like PC linked to USB dongle.
To establish Scatternet Connection, first pair and con-nect Headset with Bluetooth phone to save Headsetpairing information in phone.
Next, disconnect Headset from phone and pair Headsetwith the other device, for instance to PC via USB dongle.
When paired and connected to PC via A2DP,establish connection between Headset and BluetoothPhone(voice link) by connecting from phone. Nowthe Headset is connected to PC via A2DP(stereo) andphone via SCO(voice).
On an incoming call while streaming audio from PC,music will stop followed by bell ring. Click MFB once toanswer the call.
To end the call, press ON/OFF button once. If the otherparty ends the call first, then you dont have to pressON/OFF button. When call is ended, music will playautomatically.
Upgrading Headset Firmware To maintain maximum interoperability among Bluetooth
devices, the BSH-240 provides USB interface forfirmware upgrading.
For the instructions on how to upgrade firmware ofBSH-240, please visit our website, www.hama.com todownload the Firmware Upgrade program and manual.
Specifications
Standards Bluetooth Specification V 1.2
RF Frequency Range 2402 ~ 2480 MHz
Profiles Supported A2DP, AVRCP, Headset, Handsfree
Transmission Power 0.25 ~ 2.5mW (Class 2)
Receiver Sensitivity < -80dBm (PER 1%)
Distance 10m (in open space)Audio Frequency 20 Hz ~ 22 kHzRange
Audio S/N > 80dB
Audio THD < 0.1%
Audio Output Power > 20m Wrms
Battery Life Standby > 200 hrsAudio or Voice Connection > 12 hrs
Charging Time < 3 hrs
Adapter AC Input AC 90 ~ 250V
Weight 76g (incl. battery)
Oper. Temp. & -10 ~ +50 C,
Rel. Humidity Rel. Humidity 0 ~ 95%
-
8/22/2019 Hama Manual
14/21
13
g Operating Instruction
Summary of LED Indication and Button Presses
BSH-240 MODE ACTION LED INDICATION/Remarks
Pairing Click and hold 'VOL UP' an' ON/OFF' Slow Red an Blue flash
together for 4 seconds
Basic Features Power on Click 'ON/OFF' for 4 seconds Quick Blue flash
Power off Click 'ON/OFF' for 4 seconds Quick Red flash
Answer call Click 'MFB' once Quick Blue Flash with bell tone
Make call Click 'MFB' once after dial tone
Make call while Long click 'MFB' Dependent on phone. Some phones
listening to music do not support this feature
Handsfree End call Click 'ON/OFF' once
Operation with Reject call Short click 'ON/OFF'
Bluetooth phone Redial Long click 'MFB'
Voice dial Short click 'ON/OFF' In idle handsfree mode
Short click 'MFB' to answer
3 Way call second call and to switch
between calls
Volume up Short click 'VOL UP'
Volume down Short click 'VOL DOWN'
BSH-240 MODE ACTION LED INDICATION/Remarks
Play Short click 'MFB'
A2DP connection Next Song Click and hold 'VOL UP' for 1 second
with PC or A2DP Porevious song Click and hold 'VOL DOWN' for 1 second
device Pause Short click 'MFB'
Stop Short click 'ON/OFF'
Volume up Short click 'VOL UP'
Volume down Short click 'VOL DOWN'
Connected When linked to another BT device Off
Handsfree Disconnected or Powered on but not linked to any Blue flash for 3 minutes an then off
Operation with idle state BT device
Bluetooth phone Low battery Dim Blue or Red flash
Charging During idle mode (when device is Red with periodic Blue flash
not in use)
Charging During connection made (while Constant Red
device is in use)
Charging Complete Blue flash
-
8/22/2019 Hama Manual
15/21
14
Caractristiques du produit 14Fonctions du produit 15Que contient lemballage 15Description des pices dtaches 15Port du casque 16Mise en place/retrait de la batterie 16Charge de la batterie 16Information sur la batterie 16Mise sous/hors tension du casque 16Couplage du casque avec un appareilBluetooth (tlphone, PDA) 17Utilisation du casque pour effectuer un appel 17Utilisation du casque pour rponde un appel 17Fonction tlcommande 17Reconnexion du casque avec un appareildj connect dans le pass 18Connexion Scatternet 18Mise jour du microprogramme du casque 18Spcification 18Aperu des tmoins DEL et des touches 19
Consignes de scurit Nutilisez pas le casque au volant dun vhicule. Vrifiez les lois et rglements relatifs lutilisation de
tlphones portables et dquipements mains libres de la
rgion o vous les utilisez. Lcoute continue de musique un volume lev peutavoir une incidence nfaste sur votre oue.
Lutilisation de batteries autres que les batteries Hamadorigine est susceptible de dtriorer lappareil, dendiminuer les performances, doccasionner des blessures,des dcharges lectriques, voire mme un incendie.
Ne touchez en aucun cas le cordon lectrique ou la priseavec des mains mouilles et ne tirez pas avec force surle cordon ou la fiche.
Veuillez lire les prcautions dutilisation des batteries. Nutilisez pas dponge surface abrasive, de poudre
rcurer ou de solvants pour nettoyer lappareil ,ces produits sont susceptibles de ternir la surface de
lappareil de manire irrversible. Chargez la batterie au moins 2 heures avant la premire
utilisation. Nutilisez pas lappareil dans un hpital, un avion, etc.,
partout o lutilisation dappareils lectroniques estinterdite.
Nexposez pas les composants aux rayons directs dusoleil, aux tempratures extrmes, lhumidit ou auxvibrations.
IntroductionNous vous remercions de lintrt que vous portez nosproduits et pour lachat du casque Bluetooth stro de Hama.
Le casque Bluetooth BSH-240 de Hama est un appareil audiosans fil de qualit suprieure fournissant aux utilisateurs desfonctions audio et vocales haut de gamme et une compltelibert de mouvements grce labsence totale de cbles.
Lappareil fonctionne comme casque tlphone strosans fil quand il est reli des appareils audio compatiblesBluetooth, tels que tlphones portables, ordinateurs, etc.et comme casque mains-libres avec des tlphones ou desordinateurs Bluetooth.
Nous esprons que vous prendrez plaisir utiliser les fonc-tions uniques des produits sans fil de Hama.
Caractristiques du produit Son qualit CD et haute qualit vocale
Supporte A2DP SBC, MP3 pour la lecture audio stroen continu Supporte les profils casque / mains libres pour uneutilisation en mode mains libres avec des tlphoneBluetooth Supporte AVRCP pour une tlcommande de la lecturemusicale partir du casque Microphone amovible Serre-tte design repliable Design ergonomique et dynamique Batterie Li-Polymer haute densit, compacte,rechargeable pour une longue dure de lecture. Charge via port USB ou alimentation lectrique
f Mode demploi
-
8/22/2019 Hama Manual
16/21
15
Fonctions du produitCasque stro pour appareils Bluetooth supportant le profilA2DP (Advanced Audio Distribution Profile)
Casque mains libres pour tlphones BluetoothCasque sans fil pour PC utilisant audio en continu
Que contient lemballage
Casque stro Bluetooth Headset
Adaptateur CA/CC
Kit batterie
Microphone
Cble USB
Manuel
Remarque :les images de ce manuel sont des photos-types ; les tailleset les couleurs sont susceptibles de diffrer
Description des pices dtaches
3 Vol +
5 DEL
1 MFB
4 Vol - 6 Port USB
2 On/Off
Microphone
Serre-tte
Kit batterie
7 Touche djection de labatterie
-
8/22/2019 Hama Manual
17/21
16
Port du casque
Placez le casque de telle sorte que le serre-nuque passederrire la tte et que les attaches des oreillettes passent au
dessus des oreilles.
Mise en place/retrait de la batterie
Charge de la batterie
Chargez la batterie pendant au moins 2 heures avant la 1reutilisation.
Une fois la batterie installe dans le casque, insrez uneextrmit de ladaptateur CA/CC dans une prise de courantet lautre extrmit dans le port USB du casque.
La batterie peut galement tre charge en connectant lecasque au port USB dun ordinateur laide du cble USB.
Information sur la batterie
Indicateur de niveau de la batterie permettant de vrifierle niveau de charge laide de la couleur de la DEL : laDEL clignote en rouge une fois par seconde lorsque leniveau est faible.
Couleur de la DEL : pendant la charge - rouge, batterietotalement charge - bleu
Dure de charge : < 3 heures (le temps de charge dpenddu niveau de la batterie)
Autonomie de la batterie : veille > 200 heures, audio/connexion vocale : >12 heures .
Du fait de sa nature de produit consommable, la durede vie de la batterie diminue avec le temps. Achetez unenouvelle batterie ds quelle ne remplit plus sa fonction.
Ne laissez pas tomber la batterie, ne lui appliquez aucuneforce, ne louvrez pas ; risques de dtrioration ou desurchauffe.
Ne placez pas la batterie proximit de cuisinires oumicro-ondes ; risques dexplosion.
Placez la batterie hors de porte des enfants. Peut trenocif lorsque des batteries uses sont utilises ouplaces dans la bouche.
En cas de contact avec du liquide schappant dunebatterie, nettoyez grande eau pendant 1-2 minutes.
Nutilisez pas la batterie sur dautres appareils ; risquesde dtrioration .
Mise sous/hors tension du casque
Appuyez sur la touche ON/OFF pendant 3-4 secondesjusqu ce que la DEL clignote rapidement en bleu, puirelchez la touche afin de mettre le casque sous tension.
Appuyez sur la touche ON/OFF pendant 3-4 secondesjusqu ce que la DEL clignote rapidement en rouge, puisrelchez la touche afin de mettre le casque hors tension.
Installation de la batterie : placez le crochet de la batteriedans la rainure du casque ; poussez la batterie vers le basds que les terminaux de la batterie sont en contact avecceux du casque
Appuyez sur le boutonpour jecter la batterie.
-
8/22/2019 Hama Manual
18/21
17
Couplage du casque avec un appareil Bluetooth(tlphone, PDA) Avant de coupler le casque BSH-240 avec un appareil
Bluetooth, assurez-vous que lappareil hte supporte udes profils suivants : A2DP, AVRCP, profils casque/mainslibres.
Appuyez et maintenez la pression sur les touches VolUp & ON/OFF pendant 4 secondes (aprs avoir installla batterie dans lappareil). Relchez les deux touchesds que la DEL commence clignoter alternativementen rouge et bleu. La DEL clignote alternativement enrouge et bleu en permanence. Ce mode de couplage est
conserv pendant 1 minute ; le casque retourne en modeveille si aucun couplage nest ralis dans cet intervalle. Utilisez les touches ou les menus de lappareil Bluetooth
afin de terminer la procdure de couplage (consultez lemanuel dutilisation de votre portable ; il est possible queles instructions diffrent dun appareil lautre).
Saisissez 0000 ds que vous tes invit saisir le codePIN ; 0000 est le code fixe pour le casque stroBluetooth BSH-240.
Utilisation du casque pour effectuer un appel Assurez-vous que le casque et le tlphone portable sont
en mode de connexion et que le microphone a tbranch dans le port USB du casque.
Pour effectuer un appel, composez le numro sur letlphone portable et, ds que vous entendez la tonalit,cliquez une fois sur la touche MFB pour transfrerlappel vers le casque.
Pour terminer un appel, appuyez une fois sur la toucheON/OFF. Utilisez sur les tlphones portables supportantuniquement le profil casque, soit la touche MFB , soit la
touche ON/OFF afin de mettre fin un appel. Avec les tlphones Bluetooth supportant le profil mains
libres, appuyez sur la touche MFB de manire prolonge afin de recomposer le dernier numro reu ouappel.
Appuyez longuement sur la touche MFB afin de recomposer un numro pendant que vous coutez de la
musique sur un appareil A2DP. Remarque : Certains tlphones ne supportent pas cettefonction. La procdure pour recomposer un numro peutdiffrer dun appareil lautre. Sur certains tlphones,le fait dappuyer longuement sur la touche MFB entranera dabord laffichage sur le tlphone de la listedes derniers numros reus ou appels. Sur dautres
tlphones, appuyer longuement sur la touche MFB entranera la recomposition directe du dernier numroappel ou reu. Sur dautres encore, cette manipulationactivera la reconnaissance vocale.
Avant dutiliser la reconnaissance vocale, assurez-vousque votre tlphone supporte bien cette fonction, quelleest active et que les noms de vos correspondants ont tenregistrs. Appuyez sur la touche ON/OFF pendant uneseconde en mode mains libres inactif.
Pour parler un troisime correspondant pendant uneconversation active, appuyez brivement sur la touche MFB ds que lappel est entrant. Appuyez brivementsur la touche MFB afin de commuter dun appel lautre.
Remarque : Cette fonction est active uniquement dans lecas o vous lavez slectionne auprs de votre fourniseur de services.
Utilisation du casque pour rpondre un appel Pour pouvoir rpondre un appel, le casque et le portable
doivent tre connects et le microphone doit tre branchdans le port USB du casque.
Pour pouvoir rpondre un appel, le casque et le portabledoivent tre connects et le microphone doit tre branchdans le port USB du casque.
Utilisez la touche ON/OFF sur les portables supportantuniquement le profil casque afin de rpondre un appelentrant.
Appuyez une fois sur la touche ON/OFF afin de terminer unappel. Utilisez, sur les tlphones portables supportantuniquement le profil casque, soit la touche MFB , soit la
touche ON/OFF afin de mettre fin un appel. Si votre interlocuteur termine le premier lappel, le casque
commutera automatiquement en mode veille sans quelutilisateur doive appuyer sur la touche ON/OFF pour
terminer lappel. Appuyez brivement sur la touche ON/OFF afin de rejeter
un appel.
Fonction tlcommande Le casque peut tre utilis afin de tlcommander les
fonctions de lecture dans le cas o le casque est connect un appareil audio supportant A2DP et AVRCP. Appuyez sur la touche Vol + et maintenez-la enfonce
pendant 1 s afin de sauter au prochain titre Next .
Appuyez sur la touche Vol + et maintenez-la enfoncependant 1 s afin de lire le titre prcdent Previous Appuyez une fois sur la touche MFB en cours de
lecture afin de faire une Pause . Pour reprendre la lecture ( Resume ), appuyez une
fois sur la touche MFB en mode Pause . Pour arrter la lecture, appuyez une fois sur la touche
ON/OFF au cours de la lecture. Appuyez une fois sur la touche MFB afin de rpter
un titre.
-
8/22/2019 Hama Manual
19/21
18
d Bedienungsanleitung
Reconnexion du casque avec un appareil dj connectdans le pass
Dans le cas o le casque a dj t connect un por-tableBluetooth, un PDA ou un ordinateur, ce dernier peuttre reconnect lappareil auquel il a dj t connectdans le pass en appuyant sur une touche.
Assurez-vous que la fonction Bluetooth de lappareilauquel le casque doit tre reconnect a bien t active.
Pour rtablir la connexion au profil mains libres, mettez lecasque sous tension. La connexion se fera alors automa-
tiquement. Pour rtablir la connexion au A2DP afin dcouter de la
musique, appuyez brivement sur la touche MFB .Pour lancer la lecture musicale, appuyez nouveaubrivement sur la touche MFB .
Connexion Scatternet
La technique scatternet fait rfrence la capacitdappareils Bluetooth de pouvoir se connectersimultament deux appareils, ce qui signifie que vouspouvez, par exemple, connecter simultanment votrecasque un portable Bluetooth et un dongle USB.
Le cas de figure dcrit ci-dessus est possible uniquementdans le cas o le tlphone Bluetooth supporte les profilscasque et/ou mains libres. La fonction Scatternet ne peutpas tre ralise avec des tlphones Bluetooth supportant A2DP car les tlphones A2DP utiliseront les deuxprofils (A2PD et casque/mains libres) disponibles partirdu casque.
Via scatternet, vous pourrez rpondre un appel entrantsur un tlphone Bluetooth pendant que vous coutez de
la musique sur un autre appareil audio comme unordinateur connect un dongle USB. Pour tablir la connexion scatternet, couplez et connectez
premirement le casque au tlphone Bluetooth afin desauvegarder les informations de couplage du casquedans le tlphone.
Dconnectez ensuite le casque du tlphone et couplez lecasque lautre appareil, un ordinateur via dongle USB,par exemple.
Etablissez la connexion entre le casque et le tlphoneBluetooth (voice link) partir du tlphone ds que le
couplage et la connexion lordinateur est tablie viaA2DP. Votre casque est alors connect lordinateur viaA2DP (son stro) et le tlphone via SCO (voix).
Lors dun appel entrant, alors que la lecture audio encontinu est active sur lordinateur, la musique sarrteraet une sonnerie retentira. Appuyez sur la touche MFB pour rpondre lappel.
Appuyez un fois sur la touche ON/OFF afin de terminerlappel. Si votre interlocuteur termine le premier lappel,vous ne devrez pas appuyer sur la touche ON/OFF. Lalecture de la musique reprendra automatiquement dsque lappel est termin.
Mise jour du microprogramme du casque Pour garantir une parfaite interoprabilit entre les dif-
frents appareils Bluetooth, votre BSH-240 vous fournitune interface USB permettant la mise jour du micropro-gramme.
Pour toutes informations concernant la mise jour du mi-croprogramme de lunit BSH-240, veuillez consulter notresite, www.hama.com afin de tlcharger le programme de mise jour du microprogramme ainsi que le manuel.
Spcification
Standards Bluetooth-Specification V 1.2
Plage de frquence RF 2402 ~ 2480 MHz
Profils supports A2DP, AVRCP, casque, mains libresPuissancede transmission 0.25 ~ 2.5mW (classe 2)
Sensibilit derception < -80dBm (pour 1%)
Porte 10m (espace libre)
Plage de frquence 20 Hz ~ 22 kHzaudio
Audio S/N > 80dB
Audio THD < 0.1%
Puissance sortie audio > 20m Wrms
Autonomie de la Veille > 200 hrs
batterie Connexion audio ou vocale > 12 hrsTemps de charge < 3 hrs
Adaptateur AC AC 90 ~ 250V
Poids 76g (batterie comprise)
Temp. de service & -10 ~ +50 C,humidit rel. Humidit rel. 0 ~ 95%
Touche Vol + pour augment-er le vol. Et les fonctions
sauts functions
Vol Down button for Volume Down andPrevious functions
MFB pourfonctionsPause
et Replay
Touche ON/OFF pourla fonction Stop
-
8/22/2019 Hama Manual
20/21
19
g Operating Instruction
Aperu des tmoins DEL et des touches
Play Clic bref sur 'MFB'
Connexion A2DP Titel suivant Clic et maintien 'VOL +' pedant un ordinateur ou 1 seconde
en appareil Vorheriger Titel Clic et maintien 'VOL -' pedant compatible A2DP 1 seconde
Pause Clic bref sur 'MFB'
Stop Clic bref sur 'ON/OFF'
Volume + Clic bref sur 'VOL +'
Volume - Clic bref sur 'VOL -'Connect Lorsque connect un autre appareil BT Eteintes
Handsfree Dconnect ou Sous tension mais non connect un Clignotement bleu pendant 3
Operation with tat inactif appareil BT minutes, puis teinte
Bluetooth phone Batterie faible Clignotement bleu/rouge faible
Charge En mode inactif (lorsque lappareil nest Rouge clignotement bleupas en service) priodique
Charge En mode de connexion (lorsque Rouge, allume en permanence
lappareil es en service)
Charge Complte Clignotement bleu
BSH-240 MODE ACTION INDICATION DEL/Remarques
Couplage Clic et maintien des touches 'VOL+' Clignotement lent rouge/bleu
et 'ON/OFF' pedant 4 secondes
Cartristiques Mise sous tension Clic sur 'ON/OFF' pedant 4 sec. Clignotement rapide bleu
de base Mise hors tension Clic sur 'ON/OFF' pedant 4 sec. Clignotement rapide rouge
Rpondre appel Un clic sur 'MFB' Clignotement rapide bleu avec sonnerie
Effectuer appel Un clic sur 'MFB' aprs sonorit
Effectuer appel Long clic sur 'MFB' Dpend du tlphone. Certains
pedant lecture tlphones ne supportent pasmusicale cette fonction
Freisprech- Terminer appel Un clic sur 'ON/OFF'
funktionen im Rejeter appel Clic bref sur 'ON/OFF'
Betrieb mit Recomposition Long clic sur'MFB'
Bluetooth- Reconnaissance vocale Clic bref sur 'ON/OFF' En mode mains libres inactif
Telefon Clic bref sur 'MFB' pour rpondre
Appel confrence un 2me appel et commuter dun
appel lautre
Volume + Clic bref sur 'VOL +'
Volume - Clic bref sur 'VOL -'
BSH-240 MODUS ACTION INDICATION DEL/Remarques
-
8/22/2019 Hama Manual
21/21
20
d Die Konformittserklrung nach der R&TTE-Richtlinie99/5/EG finden Sie unter www.hama.com
g See www.hama.com for the declaration of conformity withR&TTE Directive 99/5/EC.
f La dclaration de conformit la directive R&TTE 99/5/CEse trouve sur www.hama.com
e La declaratin de conformidad segn la directiva R&TTE99/5/EC la encontrat en www.hama.com
o De verklaring van overeenstemming conform deR&TTE-richtlijn 99/5/EC vindt u onder www.hama.com
i La dichiarazione di conformit secondo la direttiva R&TTE99/5/EC disponibile sul sito www.hama.com
p A declarao de conformidade, de acordo com a DirectivaR&TTE 99/5/CE, pode ser consultada em www.hama.com
s Konformitetsfrklaringen enligt R&TTE-riktlinjen 99/5/EGfinns hos www.hama.com
m Radio- ja teleptelaitteita koskevan direktiivin 99/5/EYmukainen vaatimustenmukaisuusvakuutus lytyyosoitteesta www.hama.com
q Deklaracja zgodnoci wedug dyrektywy R&TTE 99/5/EG
mona znale na stronie www.hama.com
h Komfortfokozata megfelel a 99/5/EG - R&TTE-irnyelveknekwww.hama.com
c Prohlen o shod podle R&TTE smrnice 99/5/EGnaleznete na strnkch www.hama.com
v Prehlsenie o zhode poda R&TTE smernice 99/5/EGnjdete na www.hama.com
k 99/5/ (R&TTE) www.hama.com
u
R&TTE 99/5/EG . www.hama.com
u R&TTE Direktifi 99/5/EGye gre uygunluk beyan iinwww.hama.com adresine baknz.