guide to uk subsea capability for the oil and gas industry

This brochure is brought to you by UK Trade & Investment

HELPING YOUR BUSINESS GROW INTERNATIONALLY

A Guide to UK Subsea Capability for the Oil and Gas Industry

© Crown Copyright 2011

You may re-use this information ([not including logos, images and case studies]) free of charge in any format or medium, under the terms of the Open Government Licence. To view this licence visit www.nationalarchives.gov.uk/doc/open-government-licence/ or write to the Information Policy Team, The National Archives, Kew, London TW9 4DU, or email: [email protected]

Where we have identified any third party copyright information you will need to obtain permission from the copyright holders concerned.

Any enquiries regarding this publication should be sent to us at: [email protected] or telephone: +44 (0)20 7215 8000 (Monday – Friday 09.00-17.00)

This publication is also available from our website at www.ukti.gov.uk

Contents

02-03 Companies featured in this directory

04-05 Introduction

06 About this Directory

07 UKTI Overview

08-09 Selected Trade Associations and Business Support Organisations

10-45 Directory of UK Subsea Companies

46-62 Matrix of UK Subsea Capabilities

4 A Guide to UK Subsea Capability

Introduction

AC-CESS Co UK Ltd

ACE Winches

Acteon Group Ltd

Advanced Insulation Systems

AJT Engineering Ltd

Aker Subsea Limited

ALL OCEANS Engineering Ltd

Allied International UK Ltd

AMEC Training & Development Services

A&P Group Ltd

Applied Acoustic Engineering Ltd

Arc Energy Resouces Ltd

Arthur Smith (Grimsby) Ltd

Aubin Ltd

Balltec Ltd.

Balmoral Offshore Engineering

Bartec-Vodec Ltd.

Beauford Engineers Limited

Beck Prosper Limited

BEL Valves Ltd

Bendalls Engineering

Bifold Group

bigHead Bonding Fasteners

Bodycote

Bowtech Products Ltd

Briggs Marine & Environmental Services

Buchan Technical Services Limited

Bureau Veritas

Caparo Dynamics

CCOMM

Coastline Surveys Ltd

CodaOctopus Products Ltd

Cognity

Cordell Group Limited

Cranfield University

CSL

CTC Marine Projects Limited

Cutting Underwater Technologies

DAI Energy

Darron SBO

Deepwater EU Ltd.

DELMAR NORTH SEA LTD

Diamond Hard Surfaces Ltd

Divex

DOF Subsea UK

Doncasters Group Limited

Dunlop Oil & Marine Ltd

Edgen Murray Europe Limited

Energy Alloys UK Ltd

Engineering Technology Applications Ltd. (ETA)

EPC Offshore

Equalizer International Ltd

EW FUEL MANAGEMENT LTD

Exceed (XCD Limited)

Exova

Expro Connectors and Measurements

First Subsea Ltd

Flexitallic Ltd

flexlife

Flowmaster Limited

Forth Steel Ltd

Forum Energy Technologies

Framo Engineering

Fugro Subsea Services Ltd

GE Oil & Gas

GL Noble Denton

GPS PE Pipe Systems

Griffon Hoverwork Ltd

Hertel UK Ltd

Hillfoot Multimetals

Hima-Sella Ltd

HOUGHTON PLC

Hydrasun Limited

Hydro-Dynamics Ltd

IHC Engineering Business Ltd

IHWT Radyne

Independent Forgings and Alloys Ltd

Infield Systems Limited

Innospection Ltd

Inspectahire Instrument.Co. Ltd

Integrated Subsea Services Ltd

Intermodal Innovation

International Paint Ltd

International Piping Products

Invensys Systems (UK) Ltd.

IODS Pipe Clad Ltd.

ITW ROCOL

J+S Ltd

JCE Energy

Jee Ltd

K Controls Ltd

Kongsberg Maritime Ltd

Koso Kent Introl Limited

L&N (Scotland) Ltd.

LHR Marine Ltd

Companies featured in this directory

Linvic Engineering Ltd

Litre Meter Limited

Lone Star LWD Precision Engineering Ltd

MACAW Engineering

Maher Ltd

Marketec

Master Flo Valve UK Ltd

McMurdo Ltd

Measurement Devices Ltd

Mercuri Urval

MLT Group Limited

Modus Limited

Mooring Systems Ltd

National Physical Laboratory

Nautronix

NCA – Norse Cutting & Abandonment Ltd

NCS Survey

Neville Roe Industries Ltd.

Newburgh Engineering

Niche Products Ltd

Nortek UK

NSW Technology Ltd

Nylacast Ltd

Oceanscan Ltd

Offspring International Ltd

Oglaend System UK

Oil States MCS Limited

Oldham Engineering Ltd

Oliver Valvetek Limited

OMB Offshore Applications Limited

Online Electronics

Osiris Marine Services Ltd

Pacson Limited

PDL Solutions (Europe) Limited

PDM Neptec Ltd

Penspen Ltd

Peritus International

Petrofocus Ltd

Pipe Coil Technology Ltd

Precision Polymer Engineering Ltd

Pressure Tech Ltd

Proserv Offshore

Prospect

ProtEx (UK) Limited

QA Weld Tech Ltd

Quadrant EPP UK Ltd

RBG Limited

Responsive Engineering Group

Resys Engineering Services Ltd

RiserTec Limited

Rolled Alloys

RPS

RSL NDT Ltd

Saint-Goabin Isover

Sandvik Materials Technology

Sandwell UK Ltd

Schlumberger Subsea Surveillance

Score Subsea and Wellhead Limited

SEAL-TITE UK LLC

SMD Limited

Solutions

Sonomatic Ltd

Sparrows Baricon

Specialist Subsea Services

Speciality Welds Ltd

Subsea 7

SubSea Consultants International

Subsea Deployment Systems Ltd.

Subsea Supplies

Systech International

Tachart Ltd t/a Bolt & Nut Manufacturing

TE Connectivity

Teer Coatings Limited (Miba Coatings Group)

Titanium Engineers Ltd.

Tracerco

Transvac Systems Limited

Tritech

Tyco Fire & Integrated Solutions (UK) Ltd

TYCO FLOW CONTROL

Unique System (UK) Ltd

Universal Engineering Group

UTEC Survey Construction Services Ltd.

VBC GROUP LTD

Vector International UK Ltd

Viper Subsea Ltd

Vulcan SFM

Webster & Horsfall

Webtool Subsea

Weir Valves & Controls UK

Welaptega Marine UK Ltd.

Well Ops UK

Wellstream International Ltd

WFS Energy & Environment

Wood Group Kenny

Zenith Oilfield Technology Ltd.

Companies featured in this directory

5A Guide to UK Subsea Capability

6 A Guide to UK Subsea CapabilityIn

trod

uctio

n

This journey has seen the UK subsea industry progress from working in water depths of tens of metres to thousands of metres, in every corner of the world, often in the face of severe climatic conditions and mounting economic pressure. In our times, the offshore fields still available tend to have complex reservoirs, inaccessible locations and marginal economics. This calls for creative, cost-effective solutions that are also safe and environmentally benign. Subsea solutions score high in all these areas.

The trend towards subsea development continues, but the UK industry is not following this trend – it is leading the way. UK subsea companies are taking the global industry deeper: colder: cleaner: safer.

It should not be surprising to anyone that the UK has attained such a pinnacle of excellence in subsea engineering. Subsea wells tied back by seabed flowlines were used to produce the UK’s first oil in 1974. The North Sea went on to become the largest market for subsea production, with almost all the hardware needed, including subsea well heads, flexible flowlines, control umbilicals and control systems, being designed and produced in the UK. However, while the lessons of history are important, the UK subsea industry is nothing if not forward looking. The major subsea projects of the future will be in West Africa, South East Asia, South America and the Gulf of Mexico – all places where the UK’s subsea companies are already doing business and where their skills will be increasingly needed.

The ‘pre-Salt’ projects, offshore Brazil, give an indication of the challenges to be faced. These include: complex reservoirs, requiring careful data acquisition and interpretation and cutting-edge well engineering; ultra-deep water mooring for the floating production units; logistics for the gas offtake – pipelines in water depth of more than 2km, over a distance of 300km, with associated problems of paraffin deposition, hydrate and scaling control; high pressure and CO2, which have implications for riser and wellbore materials specification.

UK contractors and suppliers can take these and other issues in their stride. The UK has an all-round design engineering and project management capability in the oil and gas sector that is unequalled anywhere. And UK companies further along the supply chain are extremely able to supply the equipment and services that will be needed. Many of the subsea technologies in general use today were developed for the North Sea. The high levels of expertise gained in that environment make Aberdeen, especially, a centre of excellence for subsea contracting with many global companies running part, or all, of their international operations from there. Over half the commercial remotely operated vehicles (ROVs) used in the global offshore industry were designed and built by a UK company, including workclass ROV systems that can operate down to 3000 metres on ultra-deep drilling programmes. UK companies were also responsible for revolutionising horizontal drilling technology, being first to deploy multi-well production templates, the original underwater manifold centre, and intelligent riser systems.

Introduction

Subsea development has become a worldwide norm for offshore oil and gas fields. This is especially true of mature offshore provinces like the UK Continental Shelf (UKCS), where more than fifty percent of production now comes through subsea wells. The UK subsea industry acquired its world-leading capabilities, firstly, in the development of the UKCS and subsequently in other locations that have proved even more challenging.

© Canyon Offshore Ltd

A Guide to UK Subsea Capability 7Introduction

The UK designs and manufactures a very wide range of high-technology underwater electronics, cameras, sonars and sensors. Developing new technology for the ongoing subsea challenge is a core activity of the UK industry. UK centres of excellence are devoted to the research of new subsea technology, materials engineering and asset management. The UK is developing tools for intelligent completions, HP/HT optimisation, fluid and sand management, autonomous underwater vehicles (AUVs) and mini-ROVs.

Wider issues being addressed by the industry, along with academic partners, include improved seismic resolution, reservoir characterisation, exploration and downhole logging techniques. New production technology is targeted at minimising operating costs and maintaining safety and environmental performance, with novel methods for brownfield infill drilling, asset integrity, inspection, repair, debottlenecking and decommissioning. Innovative solutions include the use of low-cost lasers to detect gas leaks, tools for conducting wireline operations in highly deviated wells, flammable gas sensors, a counter-flow pig, precise subsidence monitoring using GPS and new wet-welding techniques.

The new technologies and techniques being devised by the UK subsea industry will be critical in the finding, extracting and transporting of offshore oil and gas. In future, many subsea developments will be platformless. The UK industry’s track record in pushing the limits of the possible in subsea tie-backs means that oil and gas can now be transported along the seabed over very large distances, allowing production from remote locations, even under ice sheets, direct to shore. UK companies are pioneers in this new era of ‘subsea to beach’.

Over 800 companies form the UK’s subsea oil and gas supply chain, employing 40,000 people, generating revenues in excess of US$9.5 billion with exports accounting for over 50 per cent of products and services by value. This directory provides details of some of those companies. They are among the best in the world and exemplify the key UK strengths of Innovation, Reliability, Adaptability, Sustainability and Knowledge.

If you would like to know more about the UK subsea sector, please make use of the contacts provided on pages 08-09. UK Trade & Investment and industry trade organisations such as Subsea UK stand ready to help you make contact with the subsea company you need to make your project a success. Do not hesitate to get in touch.

Revenues in 2010 of $9.5 billion, equal to 31% of world market

Output growth of 37% in last 3 years, due to domestic and export markets

UK Subsea sector exports worth more than $5 billion in 2010, a rise of 50% over last 3 years

Exports comprise 56.5% of UK sector output

Over 800 companies with a total of 40,000 employees Source: Subsea UK’s Business Activity Review 2010

The UK Subsea Industry at a Glance

© BPP-TECH

8 A Guide to UK Subsea CapabilityA

bout

this

Dir

ecto

ry

This guide

Among the full spectrum of subsea capabilities featured are:

■ Subsea engineering ■ Equipment manufacturers ■ Inspection/testing ■ Software modelling and simulation ■ Pipeline integrity ■ Training ■ Project and asset management ■ Subsea communication and control ■ Diving and ROV services ■ Subsea construction

The organisations are listed in alphabetical order by name, including their website and contact details (where these have been provided), followed by summarised information on the services provided.

Summarised example case studies have been used to illustrate this capability.These case studies have been provided by the companies themselves.

A matrix of key services and products provided by the companies listed in this guide can be found on pages 48-62.

Whilst every care has been taken in compiling the information in this guide, UK Trade & Investment and partners cannot be held liable for mistakes or omissions, and inclusion of any organisation in this guide does not constitute approval or endorsement in any way. The information on specific organisations was provided by the companies themselves, and therefore the opinions and ideas expressed do not necessarily reflect those of UK Trade & Investment.

It is the intention of UK Trade & Investment and partners that this document should continue to be developed as a useful resource.

About this Directory

This guide has been produced by UK Trade & Investment and with the assistance of Subsea UK. It provides information on the Capabilities of some of the UK companies involved in the subsea oil and gas sector.

A Guide to UK Subsea Capability 9

UK Trade & Investment is the Government department that helps UK based companies succeed in an increasingly global economy. Our range of expert services are tailored to the needs of individual businesses to maximise their international success. We provide companies with knowledge, advice and practical support.

UK Trade & Investment also helps overseas companies bring high quality investment to the UK’s dynamic economy – acknowledged as Europe’s best place from which to succeed in global business. We provide support and advice to investors at all stages of their business decision-making.

UK Trade & Investment offers expertise and contacts through a network of international specialists throughout the UK, and in British Embassies and other diplomatic posts around the world.

We can assist at all stages of the business planning cycle, from inception to completion. Here’s an overview of what UK Trade & Investment does to foster companies’ growth:

In The Export Market

■ Support to build export capability. ■ A range of services to assist in

exporting for the first time. ■ Advice and support including the

highly regarded Passport to Export programme that puts together in one simple, responsive process all the tools that exporting companies need to grow their business. The package includes advice from an international trade adviser to help develop an export strategy, identify gaps in international trade skills and then provide assistance with training, help before a visit to an overseas market and post-visit evaluation.

■ Information and opportunities including sales lead and bespoke research carried out by overseas teams that can be accessed via the web. Programmes of face-to-face meetings can also be arranged in-market and with key decision makers brought to the UK.

■ Making it happen by arranging meetings with key business contacts, and financially supporting eligible

companies to travel in groups, or at times alone to tradeshows through our Tradeshow Access Programme (TAP), or on overseas missions. UK Trade & Investment puts companies in touch with carefully selected potential buyers in their sector who are regularly brought in groups to the UK to see the best we have to offer.

Investors To The UK

■ In-depth information provision. ■ Support with doing international

business from the UK. ■ UK Trade & Investment will provide

targeted companies with a range of support including (where appropriate) a client account manager who will help existing investors develop their business. These account managers will advise on appropriate usage of trade services including sales leads and market research.

■ UK Trade & Investment will advise on the UK as a potential business location from the inception of the decision-making process through to detailed exploration of location options.

UK Trade &

Investment

UK Trade & Investment

For further information please visit us at www.ukti.gov.uk

10 A Guide to UK Subsea CapabilitySe

lect

ed T

rade

Ass

ocia

tions

and

Bus

ines

s Su

ppor

t Org

anis

atio

ns

Aberdeen and Grampian Chamber of CommerceGreenhole Place, Bridge of DonAberdeen AB23 8EUTel: +44 (0)1224 343900Email: [email protected]

Aberdeen & Grampian Chamber of Commerce (AGCC) is North-east Scotland’s leading private sector, member-focused, business organisation. The Chamber represents more than 1,200 businesses with 90,000 employees in the private sector covering all industry sectors, ranging in size from sole traders to multi-national corporations. The Chamber works at local, national and international level to provide a comprehensive portfolio of business services, support and advocacy. It is a key player regionally and nationally for lobbying, service provision and setting the business and economic agenda on behalf of our members and the business community.

Our AimOur members at the heart of the Chamber. Our Chamber at the heart of a strong and sustainable economy in the City and Shire. Our region at the heart of a prosperous country.

Aberdeen City Council Marischal College, Broad StreetAberdeen AB10 1ABTel: +44 (0)1224 522940Email: [email protected] Email: [email protected] www.aberdeencity.gov.uk/internationaltradeandinvestment/

Aberdeen City Council’s International Trade and Investment team helps Aberdeen companies internationalise their business by working in partnership to:

■ Promote Aberdeen companies’ capabilities in key international target markets

■ Raise awareness among Aberdeen companies of business opportunities in key international target markets

■ Host visiting industry (NOC/IOC) and Government delegations

■ Host trade clinics and seminars ■ Promote and participate in overseas

trade missions and key conferences and exhibitions

■ Gather and disseminate industry and market intelligence, eg Aberdeen City and Shire Export Survey

■ Facilitate business to business links via the World Energy Cities Partnership and Memoranda of Understanding with global energy regions

Africa Business CentreAberdeen & Grampian Chamber of Commerce, Greenhole Place Bridge of Don, Aberdeen AB23 8EUTel: +44 (0)1224 343928Contact: Julien MasseEmail: [email protected]

The Africa Business Centre (ABC) is an industry-led organisation established to heighten awareness of opportunities in Sub-Saharan Africa’s growing energy sector, promote the UK’s expertise and capabilities and assist its members in entering these difficult markets.

ABC provides its members with the support, information and intelligence necessary to prospect and make informed market entry decisions. It seeks to gather and disseminate African market and country information of all types, works with companies to assist their entry into the market, engages the support of government organisations and leads market visits and trade missions to the region.

ABC’s trade partners provide services such as banking and international trade finance, security, legal and logistical services to companies entering and operating in Sub-Saharan Africa. It is the UK’s largest organisation of its kind and is widely regarded as the leading support mechanism for companies entering African energy markets.

Decom North Sea33 Albyn Place, Aberdeen AB10 1YLTel: +44 (0)1224 452170Email: [email protected]

Decom North Sea is an industry forum set up to maximise the business opportunities presented by North Sea decommissioning. The main objective of the forum is to deliver practical industry support to improve knowledge transfer and stimulate collaborative activities across the North Sea supply chain.

We are working with the North Sea supply chain to create and sustain jobs and prosperity.

We are working with the operators providing reliable, safe and cost-effective solutions to decommissioning challenges.

EEEGR (East of England Energy Group)Beacon Innovation Centre, Beacon Park Gorleston, Great Yarmouth NR31 7RATel: +44 (0)1493 446535Email: [email protected]

The East of England Energy Group (EEEGR) is the industry association for energy in the East of England, representing over 50 members across the supply chain.

As a non-profit, business-led group, EEEGR is committed to the sustained development of the energy sector in the East of England and the continued success of its members.

EEEGR’s objective is to assist members to gain more business and to unite businesses accross the supply chain with a common cause and combined voice.

EEEGR members operate throughout the energy sectors including oil & gas, conventional generation, renewables and nuclear.

Selected Trade Associations and Business Support Organisations

the following organisations information is accompanied by their logo

A Guide to UK Subsea Capability 11Selected Trade A

ssociations and Business Support O

rganisations

NOF Energy1st Floor, Thames House Mandale Business ParkBelmont Industrial Estate Durham DH1 1THTel: +44 (0)191 384 6464Email: [email protected]

NOF Energy is the UK’s most proactive business development organisation working on behalf of companies within the oil, gas, nuclear and offshore renewables sectors.

NOF Energy is a not for profit membership organisation with over 400 members. We actively work to identify global opportunities within the oil, gas, nuclear and offshore renewables sectors and then work with our members to help them secure a share of these opportunities.

With over 35 years’ experience supplying to the North Sea oil and gas industry our members have a global reputation for providing innovative products, services and unique solutions to the highest quality standards. It is NOF Energy’s mission to promote our members’ capabilities and that of the wider energy supply chain to a worldwide audience.

Oil & Gas UKLondon office: 6th Floor East, Portland HouseBressenden Place, London SW1E 5BHAberdeen office: The Exchange 262 Market Street, Aberdeen AB11 5PJTel: +44 (0)20 7802 2400Email: [email protected]

Oil & Gas UK is the leading representative body for the UK offshore oil and gas industry. Membership is open to all companies active in the UK continental shelf, from super majors to large contractor businesses and from independent oil companies to SMEs working in the supply chain.

Its aim is to strengthen the long-term health of the offshore oil and gas industry in the United Kingdom by working closely with companies across the sector, governments and all other stakeholders.

Pipeline Industries GuildF150, Cherwell Business VillageSoutham Road, Banbury OX16 2SPTel: +44 (0)20 7235 7938Email: [email protected]

The Pipeline Industries Guild is the only association world-wide to cater directly for the needs of the pipeline, underground apparatus and infrastructure industries, regardless of engineering discipline or application.

Membership comprises those with interests in pipelines transporting hydrocarbon products, energy, chemicals, cables, water, wastewater, and other products, both on and offshore, world-wide; including operators, contractors, manufacturers, service & supply companies.

A calendar of conferences, seminars, professional, technical and social events is organised by the Guild. There are 3 technical panels for offshore, onshore and utilities sectors; and there are few pipeline-engineering problems that its members cannot solve.

The young professionals network concentrates on leadership, management and presentation skills and the Guild’s international panel focuses on business development, international projects and industry innovation.

Subsea UKThe Innovation Centre, Exploration Drive Bridge of Don, Aberdeen AB23 8GXTel: +44 (0)845 505 3535Email: [email protected]

Subsea UK is the champion for the UK subsea industry. We act for the entire supply chain bringing together operators, contractors, suppliers and people in the industry.

With some 40,000 employees, over £4 billion worth of services and products and over 800 companies, the UK subsea industry sector leads the world in experience, innovation and technology. The UK will maintain a leading technological edge by sustaining and expanding this important business sector.

Whether you are a company looking to join and reap the benefits or an individual looking to develop your career in the subsea industry, explore our website or contact us to find out how Subsea UK can help you, your business and your industry.

The National Metals Technology CentreSwinden House, Moorgate Road, Rotherham South Yorkshire, Rotherham S60 3ARTel: +44 (0)1709 724990Email: [email protected]

The National Metals Technology Centre (NAMTEC) is the leading business support organisation for companies which produce and process metals in the manufacture of high added-value components and systems. NAMTEC provides support and services in the following areas:

Training and Skills We provide a wide range of technical courses encompassing the production and processing of metals and alloys and their application in the major market sectors. Technical Recruitment.

With extensive links into the engineering sector and the associated knowledge base. NAMTEC implements a rigorous pre-selection programme to identify technical candidates who best fit the profile.

Consultancy We provide a broad range of technical consultancy and market analysis to assist companies with resolving technical problems and in evaluating market growth and diversification opportunities.

the following organisations information is accompanied by their logo

12D

irec

tory

of U

K Su

bsea

Com

pani

esA Guide to UK Subsea Capability

13A Guide to UK Subsea Capability

Directory of UK Subsea Companies

The UK’s subsea capability includes over 800 companies and 40,000 experts who create over $9.5 billion worth of services and products

Directory of U

K Subsea Companies

14 A Guide to UK Subsea CapabilityD

irec

tory

of U

K Su

bsea

Com

pani

es

AC-CESS Co UK LtdTyrebagger WorksClinterty, KinellarAberdeen AB21 0TTTel: +44 (0)1224 790100Contact: Callum MageeEmail: [email protected] www.ac-cess.com

AC-CESS is a world leading manufacturer of remotely operated vehicles (ROV) and underwater inspection systems and products for the remote visual inspection (RVI) of open and confined spaces. We deliver underwater inspection solutions to the global subsea, oil and gas, military, marine and research industries. AC-CESS is at the forefront of shallow and deep water ROV design. As manufacturer of the AC-ROV 100 Underwater Inspection System and the AC-ROV 3000 Fly Out System we enable unrivalled ROV inspection and ingress capabilities.

ACE WinchesTowie Barclay WorksTurriff, AberdeenshireAB53 8ENTel: +44 (0)1888 511600Contact: Linsey CrudenEmail: [email protected]

ACE Winches is a global leader in the design, manufacture and hire of hydraulic winches, marine deck machinery and associated personnel for the offshore oil and gas, marine and renewable energy and construction markets. The company’s unique project solution offering is underpinned by four divisions, ACE Manufacturing, ACE Hire Equipment, ACE Hire Personnel and ACE Winch Academy. These complementary divisions enable ACE Winches to manage the complete project, from design through to manufacture, testing, installation, commissioning, operation, training and ongoing customer support.

Acteon Group LtdFerryside, Ferry RoadNorwich, NorfolkNR1 1SWTel: +44 (0)1603 227019Contact: Paul AlcockEmail: [email protected]

The Acteon Group has an assembled outstanding portfolio of complementary products and services for the subsea marketplace. The experience shared by Acteon’s companies opens the opportunity for a fresh approach to subsea services. The group comprises four primary operating areas: – Foundations and Moorings – Back of Boat Services – Risers, Conductors and Flowlines – Subsea Electronics and Instrumentation Learn more about Acteon at www.acteon.com

Advanced Insulation Systems Quedgeley West Business Park GL2 4PATel: +44 (0)1453 511600Contact: Asaf HisherikEmail: [email protected]

Advanced Insulation Systems is a leading UK manufacturer and supplier of certified integrated HT/HP Insulation systems ContraTherm® for fixed structures and pipelines up to 2500m in depth. In addition AIS Ltd providing C.TAG/ a High visibility anti-fouling subsea markers. AIS Ltd offer survey and application services for all our products coupled with the ability to execute work anywhere in the world. ContraTherm® C55/C25 a resilient insulation material capable of tolerating HP/HT conditions up to 2500m C.TAG/ High visibility anti-fouling subsea markers system.

AJT Engineering LtdCraigshaw CrescentWest Tullos Industrial EstateAberdeen AB12 3TBTel: +44 (0)1224 871791Contact: Bill BoydEmail: [email protected]

AJT Engineering Ltd., Aberdeen, offers Clients a comprehensive, multi-disciplined engineering workshop service incorporating mechanical fitting and pressure testing, extensive machining capability, welding including GTAW cladding stations, fabrication and cold extruding facilities. Overhead craneage is available to 40 tonnes with an extensive storage yard. Divisions in East Kilbride and Port Glasgow offer salt-bath furnace heat treatments and Electrolytic Nickel and Chromium plating respectively. All divisions of the Company are accredited to BS EN ISO 9001:2008 and BS EN ISO 14001:2004.

Aker Subsea LimitedHowe Moss AvenueKirkhill Industrial EstateDyce, AberdeenAB21 0NATel: +44 (0)1224 255000Contact: Harry KulasingheEmail: [email protected]

A global provider of subsea and sub-surface technologies, solutions and services.

The following companies featuring in this directory have company logos to accompany them. Some of the companies listed have case studies which then also have images to accompany the case studies. Also there are several subsea related images throughout this section.

A Guide to UK Subsea Capability 15D

irectory of UK Subsea Com

paniesA

ALL OCEANS Engineering LtdTyrebagger Works, ClintertyAberdeen AB21 0TTTel: +44 (0)1224 791001Contact: Brian AbelEmail: [email protected]

ALL OCEANS Engineering Ltd MECHANICAL HANDLING UNDERWATER All Oceans Engineering Limited (AOE) was established in December 1985 and specialises in providing underwater mechanical handling solutions to marine, underwater and harsh environment operators and equipment manufacturers. A specialist global player, AOE design and supply diving and diver-less intervention solutions in support of underwater construction, oceanography, nuclear, military, security, aquaculture and all underwater markets.

Allied International UK LtdAllied Buildings, Earls RoadGrangemouth FK3 8XGTel: +44 (0)1324 667488Contact: Michael R DuncanEmail: [email protected]

Allied International are the leading manufacturer and supplier of steel pipes, fittings and flanges in all grades of steel. Manufacturing plants are based in the UK and Italy, specialising in high pressure, exotic material grades utilised in Subsea applications. The Company offers extensive support to its customers and is in its own right accredited by BSI to ISO9001:2008. It is registered in the Achilles Verify Register in respect of SHEQ requirements, and is further registered under FPAL to enable participation particularly in the UK Offshore Sector.

AMEC Training & Development ServicesCity Gate, Altens Farm Rd, NiggAberdeen AB12 3LBContact: Reilly MontgomeryEmail: [email protected]/training

AMEC Training & Development is a world leader in the design, development, and delivery of site-specific operations and maintenance training programs for the oil and gas industry. We have the expertise to create a best-in-class training program that enables your workforce to possess the knowledge, skills, and confidence to safely and effectively perform their job. Our deliverables include: training needs analysis, workforce nationalization programs, competency assurance frameworks, operations manuals & procedures, online training content, instructor-led training programs, OperatorSuiteT LMS.

A&P Group LtdWagonway Road, HebburnTyne and Wear NE31 1SPTel: +44 (0)191 430 8600www.ap-group.co.ukwww.ap-group.co.uk/jobs

A&P Group is built on a strong marine engineering background and has emerged as one of the world’s foremost providers of engineering related solutions. We deliver projects across a wide range of sectors and have developed a global client base that benefits from our ‘can do’ approach to marine based challenges. The A&P Group’s expertise in marine engineering, ship repair conversion and fabrication means we understand, and more importantly, have the flexibility and capability to partner with a range of sectors including the shipping, oil and gas, and renewable energy sectors offering support for both on and offshore projects. Our fabrication and engineering resources, situated across the North East and South West coastline of the UK, and are perfectly positioned to deliver subsea structures and marine infrastructure for a wide variety of projects.

We have an experienced and approachable team who welcome the opportunity to show you our engineering strength so contact us to discuss your needs.

CASE STUDY – A&P

A&P group recently loaded out two Mid Water Arches (MWAs), fulfilling a contract awarded in December 2010 for the USAN development in West Africa.

Demonstrating an ability to complete the project to the tight timescales was key to A&P being awarded the contract by Trelleborg Offshore for the two buoyant subsea structures bound for the USAN oilfield, which lies off the coast of Africa close to Nigeria.

The USAN FPSO (Floating Production Storage and Offlocading vessel) is the biggest in the world, measuring 320 metres long, 61 metres wide, 32 metres deep and weighing a massive 114, tonnes. It has a capacity of two million barrels of oil.

The structures A&P Group were contracted to build were Mid Water Arches (MWAs) made from steel and polymer materials.

The arches are buoyant support structures, tethered to the seabed, that support the pipelines on their way up from the oil wellheads to a moored FPSO.

A&P cut, shaped, welded and assembled the 12 metre high by 25 metre long structures around large polymer buoyancy units. The company also installed and fabricated the sea fastenings that the arches sit on to hold them secure during the voyage from A&P’s site to Africa.

As well as successfully completing the project in the tight timescale allocated the contract earned a zero rated incident on it’s health and safety report, in line with A&P’s ongoing health and safety commitment and also important to many clients from within the sector.


irec

tory

of U

K Su

bsea

Com

pani

es

Applied Acoustic Engineering LtdMarine House, Marine ParkGapton Hall Road, Great Yarmouth NR31 0NBTel: +44 (0)1493 440355Contact: Susan MeekenEmail: [email protected]

Designer and manufacturer of acoustic systems for positioning and tracking of underwater equipment and moving targets, and marine seismic survey equipment for sub-bottom profiling. Products in use worldwide in offshore oil, gas and renewable energy sectors, academic institutions and defence industries. Extensive network of overseas partners and service centres provide cutting-edge technologies, after sales training and technical support on a global scale. Winner of Queen’s Award for Enterprise, International Trade Category 2010.

Arc Energy Resources LtdUnit 12 Eastington Industrial EstateEastington, Stonehouse, GloucestershireGL10 3RZTel: +44 (0)1453 823523Contact: Vince WheelerEmail: [email protected]

Arc Energy Resources is a leading specialist in weld overlay cladding and fabrication services. Our heavy-duty corrosion resistant coatings are used to protect equipment from damage caused by contact with corrosive or abrasive materials in hostile environments. Our quality management system is certified to ISO 9001:2008, as well as the stringent specialist welding demands of ISO 3834-2. We are proud holders of ASME U&R Stamps, and have an environmental system certified to ISO 14001:2004. We have the knowledge and experience to engineer the perfect solution to the most complex of challenges.

Arthur Smith (Grimsby) LtdRoyal Dock Chambers, Flour Square Grimsby DN31 3LWTel: +44 (0)1472 345221Contact: David SmithEmail: [email protected]

Arthur Smith (Grimsby) Ltd is based in the Humber ports of Grimsby and Immingham and supplies a number of port and marine services. Ships Agency covers all types of vessel, whether in dock or at anchorage. Experienced stevedores handle over 10 million tonnes of bulk, unitised and specialist heavy lift project cargo per year. Port and terminal solutions are provided to clients specifications. Crew, cargo, supplies and pot water transfers are made to vessel, barge or gas rig. Vessels and tugs are also provided for divers, guard duty, buoy maintenance and recovery, dredging and construction projects. Reliable, efficient and flexible services are provided using a wealth of local knowledge allowing the customer to concentrate on their core business. The company was established in 1936 and is still family owned.

Aubin LtdUnit 1 Castle StreetCastlepark Industrial EstateEllon, Aberdeenshire AB41 9RFTel: +44 (0)1358 724361Email: [email protected]

Aubin is an independent supplier of specialist chemicals to the oil & gas industry. The company designs, develops, manufactures and supplies high-quality chemical technology for a wide range of oil field applications. We have a strong focus on research and development and have invested heavily to develop patented products for pipeline pigging, subsea insulation, buoyancy and installation and decommissioning services.

Balltec Ltd.Keerbridge Business ParkWarton Road, Carnforth LA5 9HATel: +44 (0)1524 733 388Contact: Ray Fox / Russell BensonEmail: [email protected]

Balltec Ltd design,assemble and test high load, high integrity mechanical connection, lifting and handling tools for the offshore oil and gas industry. Our products include Mooring Connectors, Pipeline Recovery Tools, Heavy Lifting Tools, Bend Stiffener Connectors, Pile Handling Tools and Coiled Tubing Handling Tools Balltec tools provide a simple, robust and reliable solution for connecting and disconnecting high loads to lifting devices and mooring systems.

Balmoral Offshore EngineeringBalmoral Park, Loirston, Aberdeen AB12 3GYTel: +44 (0)1224 859000Contact: Jim HamiltonEmail: [email protected]

With 30 years’ experience in polymer and elastomer design, engineering and manufacturing, Balmoral provides a global service from concept development through detailed design, manufacturing and testing. Products used around the world include rigid and dynamic riser buoyancy, ROV/AUV and subsurface buoyancy, thermal insulation, elastomer cable protectors, bend restrictors, stiffeners, clamps and riser protection guards. The company also operates its own hydrostatic test centre in Aberdeen which accommodates a variety of products from small systems through to the largest rigid riser modules.

Bartec-Vodec Ltd.Parkview, Lockwood CloseNottingham NG5 9JNTel: +44 (0)115 967 5240Contact: David SageEmail: [email protected]



paniesA

-B

BARTEC VODEC designs, manufactures and supplies wired telecommunication systems for reliable operation in severe climatic and harsh operational environments, including potentially explosive atmospheres and life safety critical applications. The company is IS09001/2008 accredited, has the Queens Award for International Trade and specialist ATEX certification approvals on a number of innovative products to enable safe, secure usage in hazardous areas.

Beauford Engineers LimitedBelle Vue WF1 5EQTel: +44 (0)1924 371870Contact: Tom CairnsEmail: [email protected]

Beauford Engineers specialise in the design, manufacture and commissioning of Technical Fabrications and Structural Assemblies for the Offshore Oil and Gas industry. t Designed to ensure optimum production, low maintenance and ease of operation, Beauford’s product range utilises the latest state-of-the-art technology and the Company’s unique knowledge of material selection used in the most rigorous sub-sea conditions. Furthermore, Beauford’s Engineering Department includes a team of engineers, who take particular pride in their ability to design, develop and manufacture bespoke machinery.

Beck Prosper LimitedBuilding 67, Third AvPensnett Estate, KingswinfordWest Midlands DY6 7FATel: +44 (0)1384 400321Contact: Joanne JonesEmail: [email protected]

Beck Prosper Limited specialise in the manufacture and distribution of high integrity fasteners and machined components for the petrochemical, subsea, nuclear and wind industries. We supply fully traceable studbolts, nuts and other fasteners with a focus on quality, service and on-time deliveries at the right price. As part of the Beck Industries Group we have access to huge amounts

of stock in all materials, carbon, stainless and exotic and can offer for standard and customer specific components.

BEL Valves LtdSt Peters, Newcastle-upon-TyneNE6 1BSTel: +44 (0)191 265 9091Contact: Alison EnnisEmail: [email protected]

BEL Valves is one of the leading designers and manufacturers of high-integrity valves for the oil and gas industry worldwide. We have a specific focus on high-pressure and high-integrity applications, including HIPPS, deepwater, high H2S, sweet or sour service, zero leakage and high-pressure, high-temperature HP/HT applications. The range is field-proven with 50 years’ experience and over 48,000 valves installed. Designs are specifically engineered to customer requirements, including: Through conduit gate valves Expanding gate valves Ball valves Globe, Check, Needle & Rotary Disk valves.

Bendalls EngineeringBrunthill RdCA3 0EHTel: +44 (0)1228 815350Contact: Norman AddisonEmail: [email protected]

Design and manufacture of pressure vessels, specialist steel fabrications and marine tidal turbines for the global Oil, Gas, Petrochemical, Nuclear and Renewable Energy Industries. QA Certification includes ISO 9001:2008/ASME U/NQA-1.

Bifold GroupGreenside Way, MiddletonManchester, Lancashire M24 1SWTel: +44 (0)161 345 4777Email: [email protected]

The Bifold Group of Companies are leading manufacturers of the widest range of switching instrument valves and pumps in the oil and gas sector. Enhanced by a lean and integrated manufacturing policy, alongside a unique business model, has provided peace of mind to contractors, installers and end users for over a century. Our innovative range of high-tech valve and pump products and accessories for the upstream and downstream oil and gas industries, specifically designed and developed with the customer in mind, have gained worldwide approval and credibility for the onerous conditions as found in hazardous (classified) locations, hostile and subsea environments.

bigHead Bonding FastenersUnits 15-16 Elliott RoadWest Howe Industrial EstateBournemouth BH11 8LZTel: +44 (0)1642 662 400Tel: +44 (0)1202 574 601Contact: Martin CowellEmail: [email protected]

bigHead manufactures marine grade steel fasteners ideal for subsea applications. Uniquely designed for use with adhesives, bigHead fasteners avoid the need for welding. bigHead fasteners can also be embedded in composites and plastics. Specified by many companies in the Oil & Gas market bigHead has become well known during its 40 year history for providing secure, simple and versatile fastening solutions. Made in UK in accordance with Lloyds Register QA ISO 9001:2008 standards, bigHead offers a fast and flexible design and manufacturing service. Please contact us with your enquiry.

BodycoteSpringwood Court,Springwood Close Tytherington Business ParkMacclesfield, Cheshire SK10 2XF Tel: +44 (0)1625 505300Contact: Lisa DeanEmail: [email protected]

Bodycote, the world’s leading thermal processing company, provides manufacturers with vital heat treatments,


irec

tory

of U

K Su

bsea

Com

pani

es

metal joining, hot isostatic pressing and coatings services, offering an extensive range of surface engineering solutions for the oil & gas industry. Thermal processing is a vital part of any manufacturing process and includes a variety of techniques and specialised engineering processes which improve the properties of metals and alloys and extend the life of components. Contact Bodycote to find out how we can make your products work harder for longer.

Bowtech Products LtdHowe Moss Crescent, Kirkhill Industrial Estate, Dyce, Aberdeen AB21 0GNTel: +44 (0)1224 772345Contact: Mike WinstanleyEmail: [email protected]

Bowtech designed and manufactured cameras include Survey, Observation, Inspection Quality High Definition, Ultra Low Light, Low Cost Colour and Monochrome Cameras complimented by AquaVision LED Underwater Lights and Lighting Systems. We also supply Video Control Systems, Xenon Strobes, Fiber Optic Multiplexers, Pan and Tilts, Electrical Slip Rings and Fiber Optic Rotary Joints. Custom products include an Anchor Retrieval Monitoring System for semi submersible rigs, bespoke Diver Video Inspection Systems, Leak Detection Systems and Riser Replacement Inspection Systems.

Briggs Marine & Environmental ServicesSeaforth House, Seaforth PlaceBurntisland, Fife KY3 9AXTel: +44 (0)1592 872939Contact: Sarah LeightonEmail: [email protected]

With over 40 years’ experience in the marine sector, the Briggs Group has achieved an enviable reputation in the installation and maintenance of submarine cables. We provide turnkey solutions for complex submarine cable installation and repairs. The Briggs fleet of 30 platforms range from D.P. vessels and crane barges to pontoons and versatile spud leg multicats with a proven track record in providing cable installation, repair and support operations.

Buchan Technical Services LimitedUnit 7, Fisher Offshore BaseNorth Meadows, Oldmeldrum Aberdeenshire AB51 0GQTel: +44 (0)1651 871450 Contact: Pauline PatersonEmail: [email protected]

Buchan Technical Services Limited supply rental equipment and day rate personnel to support the oil and gas industry. Our customer base includes Oil & Gas Majors, Pipeline Commissioning & Testing, Well Servicing, Well Testing, Well Control, Diving, Industrial Cleaning and Environmental Companies. Our success is based on our ability to understand our client requirements and deliver appropriate economic solutions to get the job done. The Company is ISO 9001:2008, ISO 14001:2004 and OHSAS 18001 registered and pursues rigorous Safety, Environmental and Personnel Development policies.

Bureau VeritasCraigshaw Business ParkCraigshaw Road, TullosAberdeen AB12 3ARTel: +44 (0)1224 892100Email: [email protected]

Established in 1828, Bureau Veritas is a professional services company providing clients with corporate compliance solutions to help manage risk and improve performance. One of our key sectors is the oil and gas industry and from our Aberdeen and Great Yarmouth offices, Bureau Veritas services the North Sea oil and gas sector. The North Sea is a mature region and Bureau Veritas has been involved in operations during the last 30 years for compliance, verification, integrity management and maintenance support activities on over 120 platforms.

Caparo DynamicsPO Box 36 Corngreaves RoadCradley Heath, West MidlandsB64 7DQTel: +44 (0)1384 563220Contact: Andrew DugganEmail: [email protected]

Caparo Dynamics design and manufacture a range of high performance shock and anti-vibration mounts for defence & industrial applications. Caparo Dynamics mounts comply with international specifications and are manufactured in the UK to industry’s exacting standards. Product quality is partnered with superior technical support. The use of unique calculation software enables Caparo Dynamics to verify the selection of mounts employed to isolate shock and vibration. A schematic design service to predict the response and positioning of mounts ensures customers take delivery of the optimum solution.

CCOMM1 Berry Street AberdeenAB25 1HFTel: +44 (0)1224 677 055Contact: Paul CookeEmail: [email protected]

The question every leading engineer and project manager asks is “how can I make this better?” That is the question that CCOMM ask when we approach any project. We bring in-house skills, knowledge and ingenuity to the demanding environments associated with the Oil & Gas Sector. CCOMM are visual technology specialists who provide technology solutions; Streaming Technology – video, audio and data (serial, keyboard & mouse) transport using multiplexed lossless compression. Visual display systems. Video and graphic processing, manipulation and display. Bespoke robustly engineered solutions.



paniesB

-C

Coastline Surveys Ltd1 Marine House, Falmouth MarinaNorth Parade, Falmouth TR11 2TDTel: +44 (0)1642 662 400Tel: +44 (0)1326 311220Contact: David HitchcockEmail: [email protected]

Coastline is an established marine geoscience contractor specialising in multidiscipline coastal & offshore geotechnical, geophysical, hydrographic & environmental surveys with worldwide deployment capability. Services are provided using vessels of opportunity, Client vessels or our own fleet, including the COWRIE compliant 24m multirole MV FlatHolm & MCA approved coastal survey vessels.

CodaOctopus Products LtdAnderson House, 1 Breadalbane StreetEdinburgh EH6 5JRTel: +44 (0)131 553 1380Email: [email protected] www.codaoctopus.com

Specialising in underwater technologies for imaging, survey, mapping, construction and defence, CodaOctopus supplies customers worldwide. Our comprehensive geophysical product range includes Coda systems offering feature rich productivity solutions as well as low cost alternatives in the Octopus range, which combine simplicity of operation with reliable performance in one-box solutions. Revolutionary underwater 3D imagery in real-time is uniquely provided by the Coda Echoscope delivering enhanced subsea visualisation in a wide range of applications.

CognityDavidson HouseAberdeen Science & Technology Park Balgownie Road, Bridge of DonAberdeen AB22 8GTTel: +44 (0)1224 335870Contact: Vikki RiddellEmail: [email protected]

Cognity is an independent professional engineering consultancy offering a range of advanced engineering services that can be combined seamlessly to meet your specific needs. We deliver high-quality mechanical design, advanced finite element analysis (FEA), structural design, draughting & 3D Cad. We specialise in mechanical design and robust engineering analysis – working with clients to develop their engineering concepts into finalised designs ready for manufacture. You can outsource your complete project, or sub-project, with absolute confidence.

Cordell Group Limited159-160 High StreetStockton-On-TeesTS18 1PLTel: +44 (0)1642 662 400Contact: Tony StangroomEmail: [email protected]

The Cordell Group is a multi-disciplined Project Management, Design and Construction Contractor. The Cordell Group provides engineering design, manufacturing and construction resources in the fields of Electrical, Control & Instrumentation, Software Systems Design & Engineering, Structural, Mechanical, Piping, Civil and Building. Cordell provide true turnkey solutions from concept to completion whilst maintaining a close relationship with the end user through a single point of contact. This makes Cordell an attractive partner to work with on both small and large scale offshore projects.

Cranfield University School of Applied SciencesCranfield University, Cranfield Bedfordshire MK43 0ALTel: +44 (0)1234 754086Contact: Dr Fuat KaraEmail: [email protected]/sas/oot

Cranfield University develops the expertise of subsea engineers through a range of specialist short courses and an IMarEST accredited MSc in Offshore and Ocean Technology (option in Subsea Engineering). The MSc programme focuses on the deepwater and ultra-deep water issues of oil and gas exploitation, addressing both the hardware used subsea, such as wellheads and separators, as well as covering important issues such as field layout, flow assurance, installation and maintenance.

CSL Exchange No 162 Market StreetAB11 5PJTel: +44 (0)1642 662 400Tel: +44 (0)1224 285566Contact: Neil KnowlesEmail: [email protected]

CSL delivers a complete range of project management services across the full lifecycle of oil and gas fields. Our core skills, expertise and established processes enable us to effectively provide: Field Development Planning (concept selection and project definition). Project Delivery. Operations & Maintenance. Decommissioning Established in 2000, CSL has a team of around 170 skilled offshore professionals and has had direct technical involvement in more than 250 field developments. CSL has offices in Aberdeen, London and Stavanger.


irec

tory

of U

K Su

bsea

Com

pani

es

CTC Marine Projects Limited Coniscliffe House, Coniscliffe Road Darlington, County Durham DL3 7EETel: +44 (0)1325 390 500Contact: Thomas HowardEmail: [email protected]

CTC Marine Projects is a leading provider of subsea installation, cable lay and trenching services for international offshore oil and gas, telecommunication and renewable markets. The company owns and operates the world’s largest and most technically advanced fleet of marine trenching vehicles (ploughs, jet trenching ROVs and mechanical trenchers)and operates a fleet of DP2 multi role construction support vessels and installation spreads.

Cutting Underwater TechnologiesCUT HQ, Aberdeen Science and Energy Park, Claymore Drive, Bridge of Don Aberdeen, Aberdeenshire AB23 8GDTel: +44 (0)1224 222950Contact: William CappelloEmail: [email protected]

The Tecnospamec Diamond Wire Cutting System has a 20 year track record of almost 600 successful projects, over 3200 cuts globally, 85 platforms and 850 pipelines removed. The system is diver and ROV friendly with no limitations for sizes, depth or materials.

DAI Energy8 Queens GardensAberdeen AB15 8UDTel: +44 (0)1224 624422Contact: Colin TaylorEmail: [email protected]

DAI Energy has been providing industrial automation solutions to the Oil & Gas sector from our Aberdeen base since the early 80’s. We now regularly supply and support custom project solutions to the Global Subsea Market in the following areas:- integrated ESP management systems – subsea control systems (PLC/SCADA, DCS, and ICSS) – subsea condition monitoring systems – subsea performance monitoring systems DAI Energy places high value in long term partnerships with our customers. This ensures we go the extra mile to deliver full customer requirements on original time and budget.

Darron SBOWest Bawtry RoadRotherhamS60 2XLTel: +44 (0)1709 722600Contact: Richard RhodesEmail: [email protected]

Darron SBO, part of the Schoeller Bleckmann group of companies since September 2000, provides complete manufacturing services and an extensive range of drilling products utilised in the oil and gas sectors.

Deepwater EU Ltd.3 Huxley Road, Surrey Research ParkGU2 7REContact: Timothy BrittonEmail: [email protected]

Deepwater designs and manufactures cathodic protection systems for offshore and marine assets, specializing in the development of innovative retrofit technology for aging assets in need of life extension. Founded in 1986, Deepwater is a full-service offshore corrosion control company, supplying the oil and gas industry with expertise in cathodic protection and asset integrity management. Using our own proprietary product designs, Deepwater has always focused on innovative methods and new products to improve lagging industry standards.

DELMAR NORTH SEA LTD7 Queens Gardens FF8Aberdeen AB15 4YDTel: +44 (0)1224 619212Contact: David CouttsEmail: [email protected]

© Canyon Offshore Ltd



paniesC-D

Delmar North Sea Ltd, offers complete Offshore Mooring Services and Subsea Installation and Recovery Services – Mooring Services Covering – Mooring Analysis Rig Move Procedures Tow Masters / Supervision Supply of Mooring Equipment (Included specialist equipment) Subsea Services – Delmar are able to offer the deployment and recovery of Subsea Structures utilising Anchor Handling Vessels and equipment associated with mooring, this enables us to install / recover – Subsea Trees Manifolds Control Pods THS Installation Jumpers Wet Parking of Structures Umbilicals Flow Lines Pipeline Support.

Diamond Hard Surfaces LtdCaswell Science and Technology ParkTowecester, Northants NN12 8EQTel: +44 (0)1327 354330Contact: Chris WalkerEmail: [email protected]

Diamond Hard Surfaces Ltd is a technology company and solution provider to high endurance applications of a unique amorphous diamond material; AdmT which gives extended life in high temperature, chemically aggressive and abrasive environments. Using our unique patented process we are able to coat substrates from steel to thermoplastics giving components enhanced friction, wear resistance and load carrying characteristics over and above traditional materials and other coated surfaces. We are experienced at coating many critical components to extend life and endurance of subsea applications.

Divex Enterprise Drive, Westhill, Aberdeenshire United Kingdom AB32 6TQTel: +44 (0)1224 740145Contact: Debbie AllanEmail: [email protected]

Divex are world leaders in diving equipment technology. Our vision is to be the first choice of international underwater operators for diving equipment, support services and technology. With over 11,000

products and systems we are the world’s largest manufacturer and supplier of professional diving equipment. Divex are also embracing the offshore renewable opportunity that is gathering momentum by applying our wealth of engineering experience in the offshore environment.

DOF Subsea UKGeo House, Commerce StreetAberdeen AB11 5FNTel: +44 (0)1224 285999Contact: Garry MillardEmail: [email protected]

DOF Subsea UK Ltd, part of the DOF Subsea ASA Group, provides Construction, IRM, Survey, Vessel, ROV and Integrated subsea technology services to customers in the Oil and Gas, Marine Telecommunications and Hydrographic Survey markets. DOF Subsea is today a world-class offshore subsea construction support, project management and engineering, IRM and survey contractor. The company covers regions such as Norway, the UK, West Africa, the Mediterranean, the Baltic, Russia, the Americas, Canada and the Far East.

Doncasters Group Limited Millennium Court, First AvenueDE14 2WHTel: +44 (0)7760 174145Contact: Ian Jones – Doncasters SettasEmail: [email protected]

Doncasters Settas is part of the Centrifugal division of the Doncasters Group Limited. Settas manufacture TITANIUM sand and investment castings serving the Marine, Offshore and Subsea markets with high intergrity cast products. Settas centrifugally pour castings with mechanical properties more commonly seen on forged products. Settas has an unrivalled level of quality approvals and flexible manufacturing processes to suit clients project needs from special one off manufacture to medium/high volume. Clients are turning to Settas as a viable alternative forged and machined from solid options.

Dunlop Oil & Marine LtdMoody Lane, PyewipeGrimsbyDN31 2SYTel: +44 (0)1472 359281Contact: Dr. A.R. Kambiez ZandiyehEmail: [email protected]

Dunlop Oil & Marine, a part of Continental ContiTech, is a world-leading manufacturer of floating and subsea hoses for the offshore oil, gas and petrochemical industries worldwide. We have been responsible for the key innovations in offshore hoses, including the world’s first double carcass anti-pollution floating and submarine hoses Saflote and Safgard, and we have an unrivalled supply record for these hose types in the industry. We continue to be at the forefront of hose technology and quality, becoming the first manufacturer to have hoses qualified to the new OCIMF guidelines GMPHOM 2009.

Edgen Murray Europe LimitedNewbridge Industrial EstateNewbridgeEdinburgh EH28 8PJTel: +44 (0)131 333 3333Contact: Alan CurrieEmail: [email protected]

Edgen Murray provides the energy sector with high performance steel products and a unique combination of engineering knowledge and global logistics infrastructure and support. We have the resources, materials, and expertise coupled with globally positioned strategic locations to fulfil any of your material supply chain needs, particularly when manufacturing and engineering requirements are complex and demanding. Through strong vendor relationships, a global stocking and distribution network, and outstanding service, Edgen Murray works to deliver the materials you need when you need them.


irec

tory

of U

K Su

bsea

Com

pani

es

Energy Alloys UK LtdAdvantage House, Poplar WayRotherham S60 5TRTel: +44 (0)1709 788 000Contact: Ivan GutierrezEmail: [email protected]

Energy Alloys is an established and trusted provider, partner and problem-solver for oilfield metals to global oil and gas manufacturers and service companies. We’re specialists, staffed by professionals who understand the equipment you are making and help you meet your customer’s needs in ways that save time and money. We offer Large oilfield industry-specific inventory of API and AISI/ASTM mechanical bar and tube-grade metals Stainless steels, general engineering steels and metal products. Value-added machining operations that offer finished and semi-finished parts and materials.

Engineering Technology Applications Ltd. (ETA)108 The Hundred, RomseyHampshire SO51 8BYTel: +44 (0)1794 521215Contact: James AllanEmail: [email protected]

Engineering consultancy specialising in submarine cable installations, providing engineering design, cable handling and burial equipment, project management and personnel for cable related projects worldwide.

EPC Offshore7 Albyn TerraceAberdeen AB101YPTel: +44 (0)1224 656990Contact: Keith WallaceEmail: [email protected]

EPC Offshore is a progressive, independent company providing dynamic project delivery services to assist with the control, definition and management of oil & gas projects. By combining the extensive experience of our management team with a project process and system driven approach, we have a reputation for turning development opportunities into commercially successful projects. We have a team of 40 project specialists and technical experts focused on achieving bankable projects. EPC services are categorised in three main areas: Project definition Project management Project services.

Equalizer International LtdEqualizer House, Claymore Drive Aberdeen AB23 8GDTel: +44 (0)1224 701970Contact: Ian SpillerEmail: [email protected]

UK manufacturer of high quality flange spreading and alignment tools, working to ISO9001:2008. Using state-of-the-art technology, Equalizer International has produced tools which simplify complex and problematic tasks. Equalizer flange alignment, flange spreading and vertical lifting tools are quick and easy to use. All products are supported by a straightforward step by step instruction manual. Advice and training is available from Equalizer International or any of our highly trained distributors worldwide.

EW FUEL MANAGEMENT LTD27 Kneesworth StreetSG8 5ABTel: +44 (0)1763 248 650Contact: Noel CooperEmail: [email protected]

Subsea swivels for removal of torque when laying flexible pipelines, PLETS, PLEMS and Wyes. Test pressure to 7500 psi, bores up to 18 inch at depths of 3000 meters. Metal sealing technology supplemented by 4 further seals for subsea security. DQT by DNV. Mooring buoy swivels LNG Connectors and safebreaks.

Exceed (XCD Limited)12 Bon Accord SquareAberdeen AB11 6DJTel: +44 (0)1224 577 940Contact: Angela WighamEmail: [email protected]

Exceed is a leading provider of deepwater wells project management and performance improvement services for the Energy Sector. DEEPWATER – Our deepwater project management solution is designed for NOCs and independent operators; we cover the spectrum from design & exploration through to completion. CONTINUOUS IMPROVEMENT – Our performance improvement coaches offer a unique “blended” approach, combining technical expertise with a focus on leadership, measurement and a more traditional continuous improvement approach. The results usually exceed an ROI of 5:1. Questions? Visit www.xcd.com



paniesE-F

Exova6 Coronet Way, Centenary ParkSalford M50 1RETel: +44 (0)161 787 3291Contact: Lisa HurleyEmail: [email protected]

Exova is one of the world’s leading independent specialists in the testing of materials and structures for the Oil and Gas industry. With more than 30 years of unrivalled experience in support of operators and their entire supply chain throughout exploration, development, operations and downstream operations, Exova is renowned for providing world class testing services. Our people understand the need to go the extra mile and we have a hard earned reputation underpinned by the depth of our expertise, unmatched capacity and technical support.

CASE STUDY – Exova

Exova has been engaged by Technip to investigate the effect of High Pressure Corrosion Fatigue on the life of the tensile armour wire component of pipes.

Flexible oil and gas pipelines/risers are used to connect subsea installations to floating production facilities. The flexible nature of dynamic riser systems has been a key driver in allowing the industry to move away from traditional fixed platform systems, to develop fields in deeper waters with floating production technology.

Operating in deep and ultra-deep waters can give rise to challenging environmental conditions for flexible pipe systems. Consequently, the oil and gas industry has demanded exacting testing capabilities. Exova has responded by developing bespoke facilities capable of corrosion fatigue testing at elevated temperature and pressure.

Exova have specifically designed test machines that are able to conduct testing at up to 50 bar and 150ºC in simulated sour oilfield environments. These new test facilities allow investigation of properties over a wide range of service environments; this includes continuous gas bubbling even at pressure to more closely simulate the annulus environment. The data generated will contribute towards the technological advancement of flexible pipelines and risers, which can be deployed in ever more hostile locations.

Expro Connectors and MeasurementsSubsea Excellence CentreUlverston LA12 9EETel: +44 (0)1229 485000Email: [email protected]

Expro has an established global reputation for the manufacture and delivery of market-leading subsea connector and measurement technology. We also offer surveillance on demand utilising our sonar-based clamp-on metering technology and services. The Tronic product name is recognised throughout the global subsea oil and gas industry as leading in the design, manufacture and installation of reliable subsea mateable electrical and optical connection systems. Our technology provides the industry’s most reliable way of communicating in deepwater developments.

First Subsea LtdEngineering House Lune Industrial Estate New Quay RoadLancaster LA1 5QPTel: +44 (0)1524 387777Contact: Brian GreenEmail: [email protected]

The UK’s leading supplier of subsea connection systems, First Subsea Ltd is an innovator in subsea mooring systems for deepwater platforms, Spars, FPSOs, and subsea field buoys. The first company to develop and deploy ball and taper-based connector technology, First Subsea’s Ballgrab connection system is currently used for subsea moorings, buoy pull-in tools, diverless bend stiffener connectors for production risers and umbilicals, pipeline recovery tools, Autoswage pipeline repair tools and hose connectors.

Flexitallic LtdScandinavia MillHunsworth Lane Cleckheaton BD19 4LNTel: +44 (0)1274 851 273Contact: Kathryn PayneEmail: [email protected]

The Flexitallic Group is the international leader in the manufacture and supply of high quality, high value, sealing products. Flexitallic have now launched their unique FRG-SS (Flange Rescue Gasket) for Subsea applications. The FRG-SS is capable of preventing corrosion in new installtions and adapting to corrosion damaged flange faces. FRG-SS features additional functionality with an integrated, removable handle for safe and easy sub-sea installation. For more information visit www.flangerescuegasket.com


irec

tory

of U

K Su

bsea

Com

pani

es

flexlifeExcel Centre, Exploration Drive Bridge of Don, AberdeenAB23 8GXTel: +44 (0)1224 617900Email: [email protected]

flexlife is an innovative consultancy focused on providing customers with practical solutions based on technical expertise and experience. flexlife is an industry leader in delivering subsea integrity management and subsea project management projects through a worldclass team with extensive knowledge of subsea project management, delivery and integrity management. flexlife has developed patented solutions to common problems faced by the oil & gas sector. Key markets are users of floating production vessels in North Sea, Brazil and Asia Pacific.

Flowmaster LimitedThe Maltings, Pury Hill Business ParkAlderton Road, Towcester, NorthantsNN12 7TBTel: +44 (0)1327 306000Contact: Rob ColesEmail: [email protected]

Flowmaster is a global software company providing solutions to simulate thermo-fluid systems quickly, simply and accurately; in maintenance and development. Flowmaster® V7 is 1D Computational Fluid Dynamics software that allows thermo-fluid system engineers to model and analyse the fluid mechanics and pipe flow in complex systems earlier in the development process. By simulating pressure surge, temperature and fluid flow rates system-wide, Flowmaster V7 helps understand how design alterations, component size, selection and operating conditions will affect the overall fluid systems performance.

Forth Steel Ltd28 South Gyle AvenueEdinburgh EH12 9EBTel: +44 (0)131 316 4360Contact: Neil EadieEmail: [email protected]

We are part of the Murray Metals Group and specialise in the supply of plate and profiles for subsea equipment, with over 30 years experience in the North Sea Sector. We are ISO 9001 approved and operate 24 hours a day to offer you an unparalleled response. We supply most plate grades, including S355K2+N, S355G3+N, S355G8+N, 355EMZ, EH36, S460G2+Q, 3.1 & 3.2 DNV. Our plate is sourced from leading Western European manufacturers, to provide you with quality steel, clear documents and excellent material warranty. We stock large area plate from 6mm to 350mm thick, to minimise welding and scrap.

Forum Energy TechnologiesConcorde House, Arnhall Business ParkAB32 6UFTel: +44 (0)1224 748340Contact: Shirley TaylorEmail: [email protected]

Forum Energy Technologies Inc. is a global provider of manufactured technologies and applied products to the energy industry. The Subsea Solutions division custom manufactures ROVs, intervention tooling, control systems and integrated system solutions. These items are also available for rental as well as personnel and training services, seabed coring, geoscience project management and subsea pipeline joint coating. Forum’s pioneering Rovdrill system and VMAX simulation software are providing innovative ways to drill smarter and deeper. Turn to Forum to take your subsea project to a new level.

Framo Engineering1 St Swithin RowAB10 6DLTel: +44 (0)1224 355550Contact: Tony LaingEmail: [email protected]

Framo Engineering was established in 1983 with the vision of developing leading-edge technology for the oil and gas industry, and to address the challenges of “brown” and “green” field developments. We have been the world’s leading manufacturer of multiphase technology for more than 25 years. Today, Framo Engineering provides a wide range of products that are engineered, manufactured, tested, installed and commissioned as turnkey enhanced recovery systems or modules. These products include multiphase pumps, multiphase and wet gas flow meters, multiport selector manifolds, sampling units, wet gas compressors and swivel stack systems. Framo Engineering is recognized the world over and is synonymous with enhanced recovery systems.

Fugro Subsea Services LtdFugro House, Denmore RdBridge of Don, Aberdeen AB23 8JWTel: +44 (0)1224 257600Contact: David NicolEmail: [email protected]

Based in Aberdeen, Fugro Subsea Services Ltd. operates within the geographical region of the North Sea, the Mediterranean and West Africa and are part of the global Fugro Subsea Services Group. We operate a modern and diverse fleet of ROV systems and ROV vessels, supporting our clients in a wide range of offshore projects. Our experienced team of Project personnel, Subsea Engineers and ROV operators ensure our Clients receive a first class service delivered both safely and on time. Currently we operate a fleet of 3 modern ROV support vessels and will add a new vessel to our fleet in May 2011.



paniesF-G

GE Oil & Gas2 High Street, NailseaBS48 1BSTel: +44 (0)1275 810100Contact: Jo ShailesEmail: [email protected]/oilandgas

GE Oil & Gas (www.ge.com/oilandgas) is a world leader in advanced technology equipment and services for all segments of the oil and gas industry, from drilling and production, LNG, pipelines and storage to industrial power generation, refining and petrochemicals. GE Oil & Gas also provides pipeline integrity solutions, including inspection and data management, and design and manufacture wire-line and drilling measurement solutions for the oilfield services segment. GE Oil & Gas employs more than 12,000 people worldwide and operates in over 100 countries.

GL Noble Denton39 Tabernacle StreetLondon EC2A 4AATel: +44 (0)20 7812 8700Email: [email protected]

GL Noble Denton is a global independent technical advisor to the oil and gas industry. With offices in over 30 countries, we offer expert advice and practical assistance onshore and offshore to help ensure that regardless of scale or complexity – projects and ongoing operations are both safe and profitable. GL Noble Denton offers assurance, advanced engineering, marine operations, consulting, and project execution across the entire asset life-cycle.

GPS PE Pipe Systems35 St Peters Road, Huntingdon Cambridgeshire PE29 7DATel: +44 (0)7788 567628Contact: Paul HughesEmail: [email protected]

GPS is a manufacturer of plastic liner systems regularly used for water injection flowlines. Since 1994 we have supplied projects operated by several leading oil companies including Shell, BP E & P, Statoil and others. GPS will s launch in 2011 a high temperature PE liner for operating temperatures to 85 deg In addition GPS specialises in a range of low pressure/temperature plastic barrier pipes for transportation of unprocessed crudes. GPS products include a range of high temperature hydrocarbon resistant plastic liners e.g Polyamide.

Griffon Hoverwork LtdMerlin QuaySO19 7GBTel: +44 (0)2380 686 666Contact: Mark BlundenEmail: [email protected]

Griffon Hoverwork Ltd has pioneered the development of the hovercraft and has been involved in the manufacture and operation of hovercraft since they were first conceived over 40 years ago. The World’s first hovercraft operation was set up by the founders of the business, alongside Sir Christopher Cockerell, the inventor of the hovercraft. We are the design authority for the original and subsequent British Hovercraft Corporation designs and we have an unsurpassed knowledge base. We offer the largest range of hovercraft available in the world today and are better placed than anybody in the world to meet our customers’ needs.

Hertel UK LtdUnit 3, Dunottar HouseHowemoss Drive, Dyce AB21 0GLTel: +44 (0)1224 225540Contact: Bob JackEmail: [email protected]

Hertel are a global industrial services company, providing a multi-discipline capability for maintenance, repairs, shutdowns, overhauls, installation and plant construction. Our services include access/scaffolding,rope access, asbestos removal, cladding, coatings, decommissioning, electrical and instrumentation, equipment fabrication, fireproofing, insulation, lifting, modular accommodation, non-destructive testing, pipework fabrication, structural steel, thermography and trace heating.

© Wellstream International Ltd


irec

tory

of U

K Su

bsea

Com

pani

es

Hillfoot MultimetalsHerries RoadS6 1HPTel: +44 (0)114 233 1133Contact: Diane HiltonEmail: [email protected]

Hillfoot Multimetals offers service throughout the UK, and to customers worldwide. Our capacity to part-machine and heat treat, process and fabricate gives us the flexibility to deliver to exacting client specifications. With the full range of carbon alloy, case hardening, nitriding, engineered steels, tool steel grades, aluminium special and standard extrusions including sheet and plate, Hillfoot Multi Metals is an essential supply chain partner for industry. We source our products from the best mills, smelters and extruders in the world, so we can guarantee quality. Our own metallurgical experts add to this quality with their knowledge of engineering metals, providing solutions to customers’ requirements with a value added approach.

Hima-Sella LtdCarrington Field StreetSK1 3JNTel: +44 (0)161 429 4500Contact: Janet SmithEmail: [email protected]

Hima-Sella has been designing and supplying safety critical systems up to SIL3 for over 35 years and has a wealth of knowledge and experience, backed up by unrivalled system support, post-installation. We offer individual solutions to protect assets and ensure the safety of employees by delivering systems which are tailored to end user requirements. Our open integrated safety systems are scaleable and fit for purpose. We provide systems either on their own or as part of a multiple safety system, which incorporates a combination of different safety solutions.

HOUGHTON PLCHoughton Plc, Trafford ParkManchester M17 1AFTel: +44 (0)161 874 5000Contact: Dave McGinlayEmail: [email protected]

The additives used in the development of our offshore products have been selected to balance both environmental demands with performance demands. Aqualink Sub Sea Hydraulic Control Systems Aqualink water based hydraulic control fluids are biodegradable and environmentally acceptable. They have been formulated to meet the operating and technological demands of existing and future subsea oil and gas production fields. The range of Aqualink products provides individual performance characteristics for use in conventional and high temperature wells together with formulations that also provide stability in well bore brines. The Aqualink development programme compliments the efforts being made by Houghton to introduce a range of new improved subsea control fluids for the Offshore Industry.

Hydrasun LimitedGateway Business ParkMoss Road Aberdeen AB12 3GQTel: +44 (0)1224 618618Email: [email protected]

Hydrasun has grown to become Europe’s leading provider of a wide range of fluid transfer, power & control solutions to the energy industry. Specific expertise covers: Fluid Transfer Solutions Instrumentation & Process Control Hydraulic Power & Control Umbilicals & Subsea Connectors Integrity Management Engineering & Technical Support Our product and service offering is driven by customer requirements for improved safety, quality, technical integrity, reliability, environmental awareness & value for money.

Hydro-Dynamics Ltd111 Shore Road Anstruther FifeKY10 3DZTel: +44 (0)7941 016191Contact: Shane PenningtonEmail: [email protected]

Underwater Operations/Engineering Specialists. Oil and Gas Renewables Telecoms Inshore/Nearshore.

IHC Engineering Business LtdBroomhaugh HouseNE44 6EGTel: +44 (0)1434 682800Contact: Ben WebsterEmail: [email protected]

IHC Engineering Business (EB) has developed an extensive track record in designing, building and supplying elegant engineering solutions for the offshore oil and gas, submarine telecom and renewables industries. EB not only completes tailor-made pipelay systems, but also designs and manufactures trenching equipment and specialist handling systems and provides consultancy services and outstanding life cycle support, including equipment modification, upgrades and spares packages. EB operates an Offshore Support Base well positioned at the Port of Tyne to service its manufacturing activities.

IHWT Radyne Thermatool HouseCrockford Lane BasingstokeHampshire RG24 8NATel: +44 (0)1256 33 55 33Contact: Mr David CaseEmail: [email protected]/content/3/1/3/



paniesH

-I

A division of the internationally based Inducotherm Group of companies – and as global specialists in the design, development, manufacture and installation of superior induction heating technology – IHWT Radyne’s Pipe Processing Group has provided the international Oil, Gas and Water industries with a multitude of induction coating and stress relieving solutions for over 50 years. IHWT Radyne can design, manufacture and supply complete fixed and portable coating systems for both on and offshore installations around the world, often tailored to meet particular user requirements.

Independent Forgings and Alloys LtdVictoria Forge, Livesey StreetSheffield S6 2BLTel: +44 (0)114 234 3000Contact: Alison Copley, Supply Sales ManagerEmail: [email protected]

IFA are a specialist open die forging, ring and precision bar product manufacturer. We offer fast track supply of machined or unmachined semi finished products into the offshore energy market. We offer nickel base, superalloy, titanium, specialty steel and carbon and alloy steel product manufactured on a range of fast acting hydraulic presses, forging hammers, GFM rotaty forge, ring rolling mills, heat treatment, machining, testing and inspection facilities. Approvals include ISO / AS9100; Cameron; GE Energy; ABB; FMC; NORSOK. IFA were the recipients of the Queens Award for Enterprise in 2008.

Infield Systems LimitedSuite 502, 1 Alie StreetLondon E1 8DETel: +44 (0)20 7423 5000Contact: Quentin D’A WhitfieldEmail: [email protected]

Infield Systems is an fully integrated independent energy research and analysis firm that is dedicated to the provision of accurate and up-to-date information, databases, research, market forecasts, mapping, commercial market due-diligence, transaction support, and business strategy and analysis to the global offshore oil, gas, renewable energy and associated marine industries. Infield Systems has developed industry models covering the subsea sector and provides valuable market intelligence to all of the major players in the subsea sector.

Innospection LtdUnit 1, Howemoss AvenueKirkhill Industrial EstateDyce, AberdeenAB21 0GPTel: +44 (0)1224 724744Contact: Andreas BoenischEmail: [email protected]

Innospection Ltd is a specialist in electromagnetic inspection technologies such as Eddy Current and SLOFECT and has delivered advanced NDT solutions for over 10 years. Our advanced subsea inspection tools are customised for the condition assessment of risers, caissons and structures, including through neoprene and Monel coating. MEC-FITT is a newly developed flexible riser inspection tool using our patented technology. The alliance with Fugro Subsea Services Ltd enables MEC-FITT to be interfaced with a ROV to deliver a technically advanced inspection solution during offshore operations.

Inspectahire Instrument.Co. LtdUnit 11 Whitemyres Business CentreWhitemyres Avenue AB16 6HQTel: +44 (0)1224 789692Contact: Fergus CaldwellEmail: [email protected]

Inspectahire provides a diverse range of remote visual inspection equipment, services and associated NDT techniques. We operate globally and have a base in Brisbane, Australia. Instruments are available for hire or can be accompanied by our qualified technicians. A number of small ROV’s are available for undertaking inspections tasks in confined spaces such as potable water tanks, with larger units undertaking surveys of Rig legs, Outfalls, and other subsea assets. Cameras, lasers, sonar, all form part of our portfolio.

Integrated Subsea Services LtdOcean Spirit House33 Waterloo QuayAberdeenAB11 5BSTel: +44 (0)1224 857 711Contact: David GaultEmail: [email protected]

Integrated Subsea Services (ISS) is an independent survey, diving and ROV contractor with an extensive track record of supporting the construction and maintenance of offshore oil, gas and renewables projects world wide. We have access to DP2 vessels and own a large


irec

tory

of U

K Su

bsea

Com

pani

es

fleet of work-class ROVs, observation ROVs and dive systems. Our Andrews Survey division has provided survey and positioning services to the offshore market for 30 years. ISS is an active member of IMCA, we are certified by DNV to ISO 9001 and ISO 14001 standards and we operate an independently-audited Safety Management System.

Intermodal InnovationUnit 50 Thetis roadLA1 5QPTel: +44 (0)1524 230400Contact: Mark Pett-RidgeEmail: mpettridge@intermodal-innovation.co.ukwww.intermodal-innovation.co.uk

UK based design and manufacturing company specialising in equipment for the oil & gas industry, with many years of experience in producing offshore containers and baskets to DNV 2.7-1 standard. As well as catering for larger volume production, we understand the operational requirements for more elaborate and bespoke engineered equipment that we produce in our dedicated UK facility. Over the recent years we have manufactured a wide range of offshore certified equipment. We would be interested in looking into any project so that we can demonstrate our engineering and fabrication capabilities.

International Paint LtdStoneygate LaneGateshead NE10 0JYTel: +44 (0)191 402 2625Contact: Ian FletcherEmail: [email protected]

International Paint provides a range of products for the subsea market including high temperature resistant coatings, highly abrasion resistant anti-corrosive coatings and insulation products to maintain flow assurance for Christmas trees, manifolds and jumpers. We also provide specialist coatings to prevent the build-up of marine fouling on subsea structures to aid ROV

inspections. Our products are available worldwide and are all made to the same consistent high quality standards.

International Piping ProductsBarton Business ParkBarton-Under-NeedwoodStaffordshire DE13 8BXTel: +44 (0)1283 722 000Contact: Neil McNeeneyEmail: [email protected]

IPP are a UK based TUV ISO 9001 and NORSOK M650 approved manufacturer of butt weld fittings; elbows, tees, reducers and end caps. Product is manufactured in accordance with the latest International standards as well as client specific requirements. With our in house heat treatment and high levels of testing and inspection ensures that we are able to fully control the manufacturing process and ensure we deliver high quality product on a delivery schedule to suit the client. Our extensive stocking programme of complementary pipe, fittings and flanges enables us to offer a complete piping package, often on very short lead times. We pride ourselves in being one of Europe’s largest manufacturers and stockists of duplex and nickel alloy piping product. Our core strength materials include Duplex, Super Duplex and the high nickel alloys such as Inconel, Incoloy, Monel, Hastelloy, Nickel and Titanium.

Invensys Systems (UK) Ltd.Manor Royal, CrawleyWest Sussex RH10 9SJTel: +44 (0)1293 643351Email: [email protected]

Invensys Operations Management is a leading provider of automation and information technology, systems, software solutions, services and consulting to the global manufacturing and infrastructure industries. Our solutions, which are used by more than 40,000 clients around the world in more than 200,000 plants and facilities, are delivered under several prominent industry

brands, including Avantis, Eurotherm, Foxboro, IMServ, InFusion, SimSci-Esscor, Skelta, Triconex and Wonderware. We help clients collaborate across systems and enterprises in real time to make faster, better decisions.

IODS Pipe Clad Ltd.2 Kelvin park SouthG75 0RHTel: +44 (0)1355 593530Contact: Dick van BeusichemEmail: [email protected]

IODS Pipe Clad are International Manufacturers of turnkey clad pipe and piping products to the highest standard for the Oil & Gas industry. In short, we have 14 pipe cladding stations, capable of cladding up to 13m lengths, from 4” ID to 40” OD. We also have 10 vertical cladding stations for valves, bonnets, blocks and pipe fittings such as tees, reducers and flanges. Complementing this, we have a fabrication facility where we can fully manufacture and test pipe spools.

ITW ROCOLROCOL HouseSwillingtonLeeds LS26 8BSTel: +44 (0)113 232 2600Email: [email protected]

Based in Leeds, ROCOL manufactures a wide range of products designed to meet the needs of the oil and gas industry, including innovative greases, lubricants, wire rope and ROV cable dressings, anti-corrosion coatings, coiled tubing protection, aerosol paints, and anti-slip floor coatings. We pride ourselves on producing technically advanced products with industry needs at the core. Each and every product has been developed in the spirit ROCOL is renowned for: Trusted Superior Performance, Problem Solving, High Quality, Technical Innovation, Excellent Technical and After-Sales Support.



paniesI-K

J+S LtdLombard Centre, Kirkhill PlaceAberdeen AB21 0GUTel: +44 (0)1224 773435Contact: Matt BlairEmail: [email protected]

We are an independent engineering and support company, providing a range of subsea engineering and operational support services on hardware and peripherals primarily related to subsea control systems. We design and manufacture electrical and hydraulic subsea distribution units, umbilical terminations, break-out boxes, pulling heads, stab plates, and other related seabed equipment. We operate Project Management and support contracts comprising subsea and control systems engineering, workshops, materials management, storage and maintenance. We operate a 24/7 service for all products and system.

JCE EnergyBlackburn Business ParkAberdeen AB21 0PSTel: +44 (0)1224 798600Contact: Jim CraigEmail: [email protected]

JCE Energy is an innovative division of the JCE Group of Companies. We specialise in the design, manufacture, installation and maintenance of control systems for use with tidal, solar, wind, biochemical power and other renewable energy sources. Using knowledge and expertise, we strive to deliver a customised product developed to the highest standard which is supported by their base in Aberdeen.

Jee LtdHildenbrook HouseThe SladeTonbridge Kent TN9 1HRTel: +44 (0)1732 371 371Contact: Jonathan FranklinEmail: [email protected]

Jee is an independent firm of engineers that specialises in pipeline, riser, subsea & cable engineering services & training for the oil & gas & renewables industries. Established in 1988, Jee has offices in London, Aberdeen & Abu Dhabi & provides services to clients worldwide. Jee’s expertise lie in design projects, integrity management, decommissioning planning & support & cable engineering for offshore wind farm projects. Jee’s training courses are built on the company’s engineering expertise. Regular public courses are held worldwide. In-company courses are tailored to client needs.

K Controls Ltd2 Crown WayCrown Business Centre West Drayton Middlesex UB7 8HZContact: David YatesEmail: [email protected]

K Controls products for sub-sea use are used to accurately monitor the position of on/off or modulating valves. Applications where the products are used include rig positioning, sub-sea emergency shut down or manifold valves and tanker loading or balancing. Enclosures are either coated carbon steel or stainless steel. Most units are designed for depths to 150 metres and special pressure balanced units are available for depths to 2500 metres. Proximity switches can be fitted together with 4-20mA, HART®, PROFIBUS® or FOUNDATIONT fieldbus position transmitters.

Kongsberg Maritime LtdCampus 1, Science & Technology ParkBalgownie RoadBridge of Don, AberdeenAB22 8GTTel: +44 (0)1224 226500Contact: Catriona FergusonEmail: [email protected]

Kongsberg Maritime are world leading manufacturers of marine electronics and subsea instrumentation, providing innovative and reliable solutions to customers engaged in the offshore, subsea and merchant marine industries. The company operates from 25 countries worldwide, employing over 3000 people globally. In the UK, the company is headquartered in Aberdeen with offices also in Wick, Portsmouth, Southampton and Great Yarmouth. Within the Subsea sector, Kongsberg Maritime provides key technology aimed at increasing operational efficiency for a wide range of Subsea applications.

© TSMarine Ltd


irec

tory

of U

K Su

bsea

Com

pani

es

Koso Kent Introl LimitedArmytage RoadBrighouseWest Yorkshire HD6 1QFTel: +44 (0)1484 710311Contact: Simon TattersallEmail: [email protected]

KKI’s subsea service includes project engineering, management, life of field support and tooling packages for choke and control valve packages. Our team of highly skilled and experienced engineers are based in Yorkshire, UK, from where all subsea projects are directed. As well as standard subsea choke and subsea processing valves our engineering team produces bespoke valve solutions which include HPHT and ultra-deep water service applications. Our subsea product range meets with international standards, specifications and legislation. All programmes are fully surveyed by Lloyds Register EMEA.

L&N (Scotland) Ltd.Walton RoadKirkhill Industrial Estate DyceAberdeen AB21 0GZTel: +44 (0)1224 722544Contact: Stuart McIntyreEmail: [email protected]

L&N (Scotland) Ltd. is an independent engineering company located in Aberdeen. Aberdeen is recognised as the oil capital of Europe and is increasingly exporting products, and more importantly expertise to the wider world oil & gas industry. Ideally located to service this industry we offer a comprehensive range of products & services. We are also experienced in exporting our resources, equipment and manpower to various locations across the world.

LHR Marine LtdUnit 4 Minto PlaceAB12 3SNTel: +44 (0)1224 248821Contact: Steve CarruthersEmail: [email protected]

LHR Marine Ltd was established in 1998 by the present management and is a provider of one of the UK’s largest ranges of (Feuebo)mooring and working at height equipment. LHR provides innovative systems design and are leaders in the field of safety. LHR continually reaches for new horizons, be it working at height, anti slip, marine personnel transfer or the latest grade 5 mooring accesories. Our dedicated team is on hand to answer and solve any safety related issues.

Linvic Engineering LtdHickman AveWolverhamptonWV1 2DWTel: +44 (0)1902 456333Contact: Simon DuffenEmail: [email protected]

Linvic make and supply pipe, flanges, fittings and associated products and excels at supplying difficult to source items with exacting specifications when delivery time is crucial. Linvic believe in exceeding customer expectations and service starts with a quick quotation, clarifying queries at an early stage, followed by continued customer contact leading to on-time delivery. All items are supplied within Linvic’s internal quality system to BS EN ISO9000 and the company holds many blue chip customer approvals. Part of the Accura Group; Specialists in gun drilling, deep hole boring, cnc machining and milling for the manufacture of business critical precision metal components.

Litre Meter LimitedHart Hill Barn Granborough Road North Marston MK18 3RZTel: +44 (0)1296 670200Contact: Charles WemyssEmail: [email protected]

Litre Meter specialise in the design, manufacture and supply of flowmeters; most of these are supplied to the Oil & Gas industry. The VFF rotary piston positive displacement is mostly used for chemical injection where it’s range of unique features make it the most wanted chemical injection meter in the world. Flow meters within our range are suitable for offshore, onshore, topsides and subsea applications. Custom designs, special connections, hydraulics and chemicals are our speciality.



paniesK-M

Lone Star LWD Precision Engineering LtdUnit 2, Airedale Industrial EstateKitson Road, LeedsWest YorkshireLS10 1NTTel: +44 (0)113 205 6020Contact: Jon CollingeEmail: [email protected]

A manufacturer of critical subsea components and assemblies in Low Alloy Steels, Stainless Steel and High Nickel Alloys. Operations carried out by our fully skilled workforce include CNC turning & milling, waterjet cutting, spark & wire eroding, honing, grinding and lapping. The company also has an in-house coating and plating facility allowing the supply of a full turn key product to our customers. These include Xylan, Molybdenam Disulphide, Electroless Nickel, Phosphate and Epoxy paint as well as various surface treatment processes such as Shot Peening in glass or steel and vapour degreasing.

MACAW Engineering1 Park Road, Gosforth Business Park Newcastle NE12 8DGContact: John HealyEmail: [email protected]

MACAW Engineering is a leading independent engineering consultancy working closely with global operators of oil & gas production facilities, pipelines and utility systems to reduce risk, maintain integrity and extend the service life of client assets. Based in Newcastle (UK), MACAW Engineering employs over 50 full time staff comprising of Principal Consultants, Senior Engineers and Engineers covering a multitude of disciplines including Mechanical Engineering, Corrosion Engineering, Materials Engineering and Welding.

Maher Ltd2 Brightside WayS9 2RQTel: +44 (0)114 2909200Contact: Lucy OveryEmail: [email protected]

Founded in 1932, Maher Ltd is a steel stockholder and processor specialising in high-strength, high-performance alloys. Maher holds a comprehensive range of nickel and copper based alloys, maraging steels, titanium and PH grades. Product forms supplied include bar, billet, plate and forgings. Our in-house machining capacity means that, alongside first stage machining, we can also supply semi finished and finished components. We also have in-house NDT facilities so can offer Ultrasonic and Dye Penetrant testing at short lead times.

MarketecUnit 5, 50 Cotton StAB11 5EETel: +44 (0)1224 574758Contact: Bruce AdamEmail: [email protected]

Marketec design and build physical models and system visualisation tools which provide a versatile and powerful addition to training exercises or work group planning sessions. Understanding the configuration and extent of a pressurised system is crucial to safe working practices. Similarly, understanding the consequences of operational actions or decisions, within the context of the system as a whole, is fundamental to the safety and integrity of the operation. A bespoke design and manufacturing process ensures that particular equipment configurations can be accurately represented.

Master Flo Valve UK LtdBlackness RoadAB123LHTel: +44 (0)1224 878999Contact: S Taylor Email: [email protected]

Master Flo Valve Inc. is a technological leader and world-class manufacturer of chokes, specialty control valves and supporting actuation. Master Flo’s choke valve design is ideal for any production, injection or dump applications where product performance and valve reliability are crucial. All valves utilize the superior performance proven by the cage with external sleeve trim design. With 30 years of experience, continuous testing and design improvements, this trim design excels in all applications.

McMurdo LtdSilver Point, Airport Service RoadPO3 5PBTel: +44 (0)2392 623 900Contact: Ross WilkinsonEmail: [email protected]

McMurdo Ltd leads the way in the design and manufacture of emergency location beacons. We manage every aspect of the business, from initial product design and engineering, on to production, sales and marketing, to customer service and repairs from our offices in Portsmouth in the South of England. All of our products are of the highest quality, made utilising the latest technology, and are sold via our McMurdo, Kannad Marine and Kannad Aviation brands.


irec

tory

of U

K Su

bsea

Com

pani

es

Measurement Devices LtdSilverburn Crescent, Bridge of Don Aberdeen AB23 8EWTel: +44 (0)1224 246700Contact: Keith S. ParkEmail: [email protected]

With more than 25 years’ experience, MDL is a global pioneer and world leader in laser measurement technology and positioning and navigation systems used by businesses which have reached the forefront of their industry by increasing their efficiency and providing the best technologies for their staff. MDL’s Fanbeam® system is a laser based positioning sensor designed for repetitive, high accuracy range and bearing measurements from offshore support vessels and other marine structures. The system is primarily used as a dynamic positioning (DP) reference sensor.

Mercuri Urval14a Rubislaw TerraceAB101XETel: +44 (0)1224 618390Contact: Blair JossEmail: [email protected]/shortcut_xx

From its Swedish origins in 1967, Mercuri Urval has grown organically into a major international consulting firm employing more than 700 professionals throughout 80 offices, that are spread across 25 countries, and 5 continents. As pioneers in predicting the impact of behaviour on business results we have always understood the value of employing the right people. Today we offer our significant client portfolio a full range of recruitment, talent management, business transformation and executive and board services. All are supported by best-in-class intellectual property and tools.

MLT Group LimitedGrange Lane, Brinsworth, Rotherham S60 5AETel: +44 (0)1142 617979Contact: Owen HallEmail: [email protected]

MTL Group is a global supplier of high strength steel fabrications. Handling multi-million pound contracts for customers who manufacture large subsea structures for the offshore and renewable energy sectors. We have more than 30,000 sq m of manufacturing space,allowing us to handle complex and large fabrications up to 400 tonnes. We have European qualified welding engineers and supply parts to the following standards: EEMUA 158 NORSOK M101 ISO EN 3834.

Modus LimitedBeaumont House, Beaumont Street Darlington DL1 5RWTel: +44 (0)1325 387 480Contact: Karen WebbEmail: [email protected]

Modus specialises in marine trenching, ROV support and construction survey operations; providing a comprehensive service for subsea infrastructure protection and IRM (inspection, repair and maintenance). Operating a fleet of state of the art trenching and work class ROV spreads and equipment, the Modus objective is to provide technical and operational excellence through professional, safe, innovative and cost effective services to the offshore construction community. Our multi-disciplined team have extensive experience ensuring continuous client focus and successful project delivery.

Mooring Systems Ltd1 Queens Terrace, AberdeenAB10 1XLTel: +44 (0)1224 624666Contact: Doug DavidsonEmail: [email protected]

Mooring Systems Limited (MSL) is an Aberdeen based company providing mooring systems, spooler rental and engineering services to the offshore industry. The company is the patent holder for the Tri-Catenary mooring system, TCMS®, a flexible and effective station-keeping and production system for mooring FPSO vessels and floating storage tankers in marginal fields in water depths from ultra-shallow water (55m) to ultra-deepwater (over 800m). The MSL Spooler Rental Division is a one-stop-shop for engineers and project managers who require reliable, efficient and adaptable systems for a specific project.

National Physical LaboratoryHampton RoadTW11 0LWTel: +44 (0)20 8943 6385Contact: Ray ChegwinEmail: [email protected]

NPL is the leading metrology laboratory for underwater acoustics in the world, and NPL facilities for underwater acoustics are unique within Europe. These include state-of-the-art laboratory tanks with precision positioning systems, an acoustic pressure vessel which can simulate ocean conditions in the laboratory, and an openwater facility located on a reservoir. NPL has an active research programme in the field of underwater acoustics, including research into novel techniques for measurement of underwater radiated noise.



paniesM

-N

NautronixHowe Moss AvenueKirkhill Industrial EstateDyce, Aberdeen AB21 0GPTel: +44 (0)1224 775700Contact: Lynne AduEmail: [email protected]

Nautronix is a marine technology company specialising in Subsea Acoustics and Positioning for the Offshore Industry. Headquartered in Aberdeen, with offices in Houston and Rio, Nautronix utilise their unique ADS² (Acoustic Digital Spread Spectrum)signalling technology to overcome the limitations of traditional acoustic systems in a range of applications. Nautronix’ main product lines are NASNet®, NASCoM and Vessel Systems. For more information on Nautronix and its products please visit www.nautronix.com

NCA Norse Cutting & Abandonment LtdUnit 1 Howemoss DriveKirkhill Industrial EstateDyce, Aberdeen AB21 0GLTel: +44 (0)1224 722555 Contact: Jamie StewartEmail: [email protected]

NCA is a global provider of Well Abandonment and Decommissioning Services for the offshore oil and gas industry. NCA has the capability to take on complex projects with fit for purpose engineering, multiple services and subcontracting in specialist area’s like Rigless P&A’s, Well Abandonment, Subsea Wellhead Removals and Conductor Slot Recoveries.

NCS Survey14 Abercrombie CourtAB32 6FETel: +44 (0)1224 749499Contact: Andrew McMurtrieEmail: [email protected]

NCS Survey is the leading independent UK survey company providing survey and positioning services to the offshore O & G and renewable energy sectors on a global basis. The company comprises a group of highly experienced onshore and offshore staff. It has carried out over 600 projects in 35 different countries. The company works closely with its clients to provide cost effective and technically advanced solutions that are tailored to meet project requirements, including the low logistics AUVs and 3D real-time subsea visualisation.

CASE STUDY – NCS Survey

In June 2010, NCS Survey was contracted by NAM (Shell Netherlands) to perform a scour survey around the legs of the jack-up drilling rig GSF Monarch.

Previous scour surveys were performed by a small manned vessel with a hull-mounted MBES (multi-beam echo sounder). Such methodology required the outflow lines associated with drilling to be raised, thus disrupting drilling operations while the small vessel sailed under the jack-up drilling rig. There are obvious safety implications for such a vessel operation, not to mention the impact on the drilling schedule.

Instead, NCS Survey mobilised on board a standby vessel that was able to maintain a position outside the exclusion zone of the platform/drilling rig, whilst the AUV (Autonomous Underwater Vehicle) was launched, performed its mission and returned to the vessel. Not only did this methodology have no impact on drilling operations, it removed a hazardous vessel operation.

The AUV mission took a little over 2 hours, with several lines runs between the legs of the jack-up drilling rig, and between the stern legs and the platform.

Shell Netherlands has subsequently contracted NCS Survey to perform three additional jobs at the same location plus others – demonstrating the benefits of using AUVs.

Neville Roe Industries Ltd.Euro Works, Liverpool StreetSheffield S9 2PUTel: +44 (0)114 2430395Contact: Spencer RoeEmail: [email protected]

Providing a Grinding and Hard Chrome Plating service to the Engineering, Oil and Food sectors. Surface finishing to both new and worn components. The UK’s largest bore-grinding capacity and formidable cylindrical, surface and universal grinding expertise. Hard Chrome Plating up to 5.5M long.

Newburgh EngineeringBessemer Way, Rotherham S60 1FBTel: +44 (0)1709 724260Contact: Matthew JewittEmail: [email protected]

Founded in 1939 Newburgh Engineering is an ISO 9001, ISO 14001, Achilles UVDB, and “Investors in People” accredited contract manufacturer of larger high specification engineering component parts and assemblies. Our service ranges from the production of low volume non repeating items and special purpose equipment through to long-term partnerships for the supply of precision components and assemblies in customer dedicated manufacturing cells. Newburgh supplies a total manufacturing solution from 2 production sites (Rotherham and Bradwell, Derbyshire) producing critical components and assemblies for global projects.


irec

tory

of U

K Su

bsea

Com

pani

es

Niche Products LtdWalter Leigh Way, Moss Industrial EstateLeigh Lancashire WN7 3PTTel: +44 (0)8452 967751Contact: Peter EcclesEmail: [email protected]

Niche Products supply the Pelagic range of subsea control fluids to the offshore industry. Pelagic 100 is our high technology environmentally superior subsea production control fluid and Pelagic 50 is our high performance environmentally superior BOP Fluid. All subsea control fluids supplied by Niche are designed with the environment in mind and our mission is to supply the most environmentally acceptable fluids possible with no compromise in technical performance.

Nortek UKTresanton House, Bramshott CourtGU30 7RGTel: +44 (0)1428 751953Contact: Gordon Jones, Ramsay LindEmail: [email protected]

Nortek are market leaders in sea-bed wave and current profiling, surface and bottom current measurements and precision monitoring of turbid waters. We pride ourselves on being innovative in product development and production processes. We have a number of technological ‘firsts’ and several of our products are protected by US patents. We have a well established, world-wide, design, manufacture and support network through our offices located in Norway, the UK, France, Holland,the USA and China.

NSW Technology LtdUnit G8, The Enterprise CentreExploration Drive, Aberdeen AB23 8GXTel: +44 (0)1224 339880Contact: Scott GardenEmail: [email protected]

NSW Technology Ltd, a subsidiary of Norddeutsche Seekabelwerke GmbH, is a manufacturer of subsea cables for carrying power, signals and communications. The challenges and potential of the offshore industry continue to grow apace. At the same time our customers have very special requirements. As the recognised experts in offshore subsea cables NSW can offer these solutions by meeting the stringent industry requirements. Cables manufactured by NSW include: Control Cables Electro Optical Cables Power Cables ROV Main Lift and Tether Cables Plough and Trencher Umbilicals Air Gun Umbilicals.

Nylacast Ltd200 Hastings RoadLE5 0HLTel: +44 (0)116 276 8558Contact: Howard BradfieldEmail: [email protected]

With the ability to manufacture and machine a wide range of engineering polymers Nylacast are recognised as a market leader in the supply of Offshore and Subsea components. Nylacast has the knowledge and facilities to provide a full range of engineering polymer solutions supported by a full R&D and testing facility. Furthermomre, Nylacast are FPAL registered and adopt the frameworks of best practice in quality to ISO 9001:2008 / TS 16949.

Oceanscan Ltd Denmore Road, Bridge of DonAberdeen AB23 8JW Tel: +44 (0)1224 707000 Tel: +44 (0)1502 509247Contact: Jon Bancroft Email: [email protected]

Oceanscan is a leading international equipment and personnel company providing the latest cutting edge, underwater and inspection equipment to the Oil and Gas, Defence, Aerospace, Renewables, Automotive and Telecomms markets from its bases in Aberdeen, Sheffield and Lowestoft. With our global partnering network, we ensure our customers get the fastest, most reliable support; whenever or whereever they need it. Consisting of 3 divisions – Products, Rental and Personnel, we offer a 1-stop shop for all our customers requirements.

Offspring International LtdUnit 8, Castle Court 2, Castlegate Way Dudley, West Midlands DY1 4RHTel: +44 (0)1384 453880Contact: David RowleyEmail: david.rowley@offspringinternational.comwww.offspringinternational.com

Offspring International Limited (OIL) is a leading supplier of single point, offtake buoy mooring systems and deepwater polyester rope mooring systems for floating production platforms, Spars, submerged turret loading buoys and floating production, storage and offtake (FPSO) vessels. A dedicated team of mooring professionals, OIL staff are active members of the Oil Companies International Marine Forum (OCIMF) where it has contributed to Single Point Mooring (SPM) best practice. The company is also represented on many oil and gas industry’s Joint Industry Projects (JIPs) deepwater mooring committees.



paniesN

-O

Oglaend System UKUnit 24 Springfield Industrial EstateB69 4HH Oldbury West MidlandsTel: +44 (0)121 552 9662 Contact: Andy FoulkesEmail: [email protected]

Oglaend System strives to develop and deliver the best possible cable tray, cable ladder and multidiscipline support solutions to our customers – solutions that contribute to the reduction of the Total System Cost of a project. Our mission is to make our customers competitive through our unique MultiGridT support system and cable trays and cable ladders for electrical cables, instrumentation, telecom, HVAC & piping. Planning, design and installation with our range of support will add value through time reduction, maximised volume utilisation, weight reduction, enhanced life time integrity and improved safety performance.

Oil States MCS LimitedBouthwood RoadLA14 4HBTel: +44 (0)1229 825080Contact: Owen B. OsmotherleyEmail: [email protected]

Oil States MCS Limited provides Hydra-Lok® pile-to-structure connections for subsea structures and jackets and the Hydra-Lok Lite® system for connection of lightweight subsea structures. Allied with the Latch-Lok Levelling System a complete levelling and connection package can be offered. An adaptation of the Hydra-Lok® system has also been developed to repair damaged and corroded caissons. The company also offers an Abrasive Water Jet Cutting system for use in decommissioning (platform removal) and in the fields of repair and maintenance both onshore and offshore.

Oldham Engineering LtdOverens Street, Oldham, LancsOL4 1LATel: +44 (0)161 627 5822Contact: Nigel StaffordEmail: [email protected]

Fabrication, machining, mechanical assembly and turn key projects. Welding to BSEN 15614 & ASMEIX. Materials welded Carbon Steel, Duplex, Super Duplex, Stainless Steel and Nickel Alloys. Experienced in the manufacture of Measure Master Assemblies, Venturies, Reaction Collars,Bend Stiffeners, Tether Clamps Pipe laying A Frames, Slab Valves, Pipe adaptors and Umbilical Steelwork. Customers include FMC, Trelleborg, Forsyths, Clyde Union, Caley Ocean, L & N and Stats Group.

Oliver Valvetek LimitedParkgate Industrial EstateWA16 8DXTel: +44 (0)1565 632 636Contact: Mark WillettEmail: [email protected]

Multi-awarding winning Oliver Valvetek offers an extensive range of engineered-to-order, field proven small bore deepwater hydraulically actuated gates valves, manually actuated gate valves with optional position indication, half turn gate valves, floating and trunnion mounted ball valves & needle valves for subsea completions worldwide. We are fully familiar with the requirements of national, major and independent oil and gas operators, contractors and leading manufacturers and suppliers of subsea production systems, and offer industry leading HSE, quality and delivery performance.

CASE STUDY – Oliver Valvetek Limited

Oliver Valvetek successfully passed unusually rigorous qualification testing on five of their products destined for use in the deep water oil fields off the coast of Angola. The positive result signifies the final approval of an order worth several million pounds to the company.

The five products were; a 1” actuated valve, a ½” actuated valve, a 3/8” half turn gate valve, a 1” check valve and a 1” half turn gate valve. Ordinarily these valves are made out of either stainless steel or duplex, however the order specified Inconel, which has subtle differences in its thermal and tensile qualities so the valves needed to be subjected to requalification testing.

Also, the company would normally have carried out the API 6A PR2 test, the endurance test and the hyperbaric test separately, but in this case the client’s wishes were quite particular.

According to client stipulations the valves were subjected to a 200 cycle API 6A PR2 test at pressures up to 10,000 psi and between -20°F and +250°F, a 1000 cycle endurance test and a 200 cycle hyperbaric test at a simulated depth of 3,000 metres all of which were conducted consecutively.

The successful testing Oliver’s products validates the company’s involvement in deepwater operations offshore West Africa and sends a clear message that their valves will last the lifetime of the installation.

OMB Offshore Applications LimitedSuite 12A castleCroft Business centreTom Johnston Rd, Dundee DD4 8XDTel: +44 (0)1382 772992Contact: Martin PhillipsEmail: [email protected]

OMB is a key supplier of Subsea Isolation Valves World Wide. Specializing in the supply of high pressure metal to metal Ball Valves with zero leakage, ideal for SSIV applications. Our range of High Integrity Ball, Gate and Swing Check Valves provide RELIABILITY in sealing through out the range. Size and Pressure Range 2” to 60” NB, 150# to 15000 psi.


irec

tory

of U

K Su

bsea

Com

pani

es

To compliment our standard range our extensive variety of Double barrier, modular and double block and bleed valves offer high end security Subsea.

Online Electronics266 Auchmill RoadAB21 9NB Tel: +44 (0)1224 714714Email: [email protected]

Online Electronics Ltd (OnlinE) specialise in the design and manufacture of pipeline pig monitoring equipment and pipeline data communication systems. The product range covers acoustic, electromagnetic, magnetic and ultrasound technologies. These technologies cover subsea and land applications with an innovative approach to pig locating, signalling, data logging, through pipe wall communications and data transfer to remote locations. OnlinE also specialise in “one-off” design projects and ATEX compliant products. Products can be supplied or hired at short notice.

CASE STUDY – Online Electronics

More and more subsea pipelines are being laid and exploration and production are taking place in ever-deeper waters with operations down to 5,000 metres now expected. This creates new challenges for providers of offshore pigging services.

Pre-commissioning pigs may be pre-installed into launchers months and sometimes a year in advance of flooding, cleaning, gauging and testing operations. Subsea pigging service provider Online Electronics Limited (OEL) says that pressure rating, battery life and delayed-activation techniques are among the key parameters that need to be addressed to ensure that the quality of pigging equipment matches up to its intended use. The exceptionally high quality of OEL’s equipment was demonstrated in its work on the Hybrido field.

In 2009 Petrobras began developing the Hybrido gas field, offshore Brazil, 2000 metres deep and over 100km from shore. The field development involved the installation of 141km of flexible and rigid lines.

OEL supplied pig-tracking, signalling and data logging equipment that enabled proof of launch, proof of receipt, and a means of tracking pigs. All products delivered met the battery-life requirement by incorporating pressure-switch activation where appropriate while also complying with the necessary pressure rating.

Petrobras’ safety standards require that any subsea pipeline be fully tested to one-and-a-half times its operating pressure. OEL’s temperature and pressure subsea data-logging system was used to monitor, record and report pressure and temperature data for each pipeline hydrotest. Its function was to secure the data while freeing up the support vessel to continue to the next phase of operations.

Osiris Marine Services LtdUnit 3 Hawshaw LodgeLothersdaleWest Yorkshire BD20 8HPTel: +44 (0)1535 631 141Contact: Debbie FeeneyEmail: [email protected]

Osiris Marine Services is one of the UK’s leading subsea engineering and commercial diving organisations, Osiris specialise in providing total engineering solutions to the offshore wind farm energy sector and environments of difficult access. With over 25 years experience, the services provided range from Bespoke design Fabrication and manufacturing Installation and construction Inspections and surveys Repairs and demolition Osiris Marine Services was set up by Managing Director Aiden West in 1996, based in North Yorkshire, the business operate both nationally and internationally.

Pacson LimitedUnit F, Claverhouse Ind. ParkDundee DD4 9UATel: +44 (0)1382 513655Contact: Derek MasonEmail: [email protected]

Pacson Valves is a key supplier of high integrity valves to the global Oil & Gas market. The company is a leading developer of valves for severe service and highly critical applications. A privately owned Scottish company, with its headquarters and state-of-the-art manufacturing facilities based in Dundee, Scotland, Pacson Valves also has sales offices in every major oil and gas producing country in the world. We pride ourselves on the quality of our products and services. With total in-house capability for the design and manufacture of surface and sub-sea valves and pressure control products up to 16 inch / 400mm bore, or up to 25,000 psi working pressure.

PDL Solutions (Europe) Limited1 Tanners Yard, HexhamNorthumberlandNE46 3NYTel: +44 (0)1434 609 473Contact: Paul CharltonEmail: [email protected]

PDL is a leading provider of advanced engineering design and analysis consultancy services to clients operating in predominantly the nuclear, defence and the energy market sectors. PDL engineers utilise the following engineering toolsets to deliver robust engineering solutions: Mathcad STAAD Pro structural analysis CAESAR II pipe stress analysis OrcaFlex global dynamic analysis ANSYS Professional FEA ANSYS Structural FEA ANSYS Mechanical FEA ANSYS LS-DYNA (Penetration and Impact) dynamic FEA ANSYS AutoDYN (Blast and Fragmentation) dynamic FEA ANSYS CFX Flo Computational Fluid Dynamics (CFD).



paniesO

-P

PDM Neptec Ltd4-6 Alton Business CentreOmega Park GU34 2YUTel: +44 (0)1420 85848Contact: Gary KellyEmail: [email protected]

Here at PDM Neptec, we supply underwater connectors, cable harnesses and associated engineering services for harsh environments. With over 25 years’ experience in subsea engineering, our design team offers solutions for all connectivity issues. New products for 2011 include the compact Omicron fibre optic connector, and a new portable jointing kit for the refurbishment, termination and moulding of cable and connector tails. The official Teledyne Impluse distributor for UK and Europe, we operate under ISO 9001:2008, and are committed to finding cost effective solutions combined with quality.

Penspen Ltd3 Water Lane, Richmond upon Thames Surrey TW9 1TJTel: +44 (0)20 8334 2700Contact: Helen RickettsEmail: [email protected]

Penspen is an international yet independent engineering company which has provided engineering and management services to the oil and gas industry worldwide for over 55 years and has 1,600 professional staff. Penspen’s Offshore Business Stream has engineering centres in Aberdeen, Abu Dhabi, Bangkok and London. This Business Stream also trades under the well known and respected subsea and pipelines name, Andrew Palmer & Associates. Penspen provides a fully integrated service for every stage of oil and gas facilities including subsea and pipeline projects.

Peritus International5th Floor, Export HouseCawsey Way, Woking GU21 6QXTel: +44 (0)1483 312800Contact: Graham TaylorEmail: [email protected]

Peritus provides advanced subsea and floating systems engineering and project management services, with a focus on difficult and deepwater environments for: Subsea Systems. Subsea Pipelines. Risers. Floating Systems. Flow Assurance. Advanced Engineering Our network of regional engineering centres enables skills, knowledge and expertise to be shared globally, cutting the duplication of resources to deliver lower cost, technically superior subsea solutions. Our team features industry leaders supported by senior personnel with considerable experience in subsea and floating systems.

Petrofocus LtdJames Gregory Centre Balgownie Drive Bridge of Don AB22 8GUTel: +44 (0)1224 704700Contact: Ian DouglasEmail: [email protected]

Established in 1998, Petrofocus provides software solutions to the drilling and well completion sectors of the oil industry. Most UK operators and an increasing number of overseas clients use our core product, Completions Manager. Completions Manager allows well engineering teams to design and maintain engineering quality well schematics in a controlled and standardized manner. Using comprehensive symbol libraries, internal database, automated drawing features and optional modules, engineers can create and amend drawings and data quickly and easily without compromising on quality.

Pipe Coil Technology Ltd2nd Floor Pametrada BuildingOceana Business ParkDavy Bank NE28 6UZTel: +44 (0)191 295 9910Contact: Chris SprattEmail: [email protected]

Pipe Coil Technology Limited design and supply several types of coiling, winding and handling machinery for use in the manufacturing and installation of flexible risers, flexible flow-lines, control umbilical and power cable. Equipment is supplied to meet the technical and commercial requirements of individual customers. We work closely with clients throughout projects to ensure compatibility of equipment with overall manufacturing processes and timely project completion.

Precision Polymer Engineering LtdGreenbank RoadGreenbank Industrial EstateBlackburn, Lancashire BB1 3EATel: +44 (0)1254 295400Contact: Donna MaskellEmail: [email protected]

Precision Polymer Engineering (PPE) specialises in high performance, elastomer seals for offshore oil and gas applications. Over the past 25 years, PPE has supplied O-rings and custom seals for systems operating in the most inhospitable subsea environments in the world at temperatures from -46°C (-51°F) up to +327°C (+621°F). The ENDURA® range of oilfield elastomers has been specifically developed by PPE for use in downhole, surface and subsea oilfield equipment and offers excellent explosive decompression (ED) resistance. The range includes material grades that provide the ultimate in chemical resistance and low temperature performance for use in Arctic conditions.


irec

tory

of U

K Su

bsea

Com

pani

es

Pressure Tech LtdUnit 3, Rossington PlaceGraphite Way HadfieldGlossop SK13 1QGTel: +44 (0)1457 899 307Contact: Steve Yorke-RobinsonEmail: [email protected]

Pressure Tech is a highly innovative manufacturer of stainless steel pressure regulators for use in the oil and gas and process industries. Based in Glossop, Derbyshire, the company focuses on market-leading design, quality products, competitive prices and working closely with customers to meet their needs exactly. Altogether, Pressure Tech offers analyser, high pressure and process ranges plus custom solutions. Typical of Pressure Tech’s innovation is the LF-690 hydraulic regulator with Shuttle Ball that improves efficiency, cuts costs and lasts five times longer than competitors.

Proserv OffshoreTumulus Way, Midmill Business Park Kintore, Aberdeenshire AB51 OTGTel: +44 (0)1224 632020Contact: Kevin IngramEmail: [email protected]

Proserv Offshore is a global leader in subsea maintenance abandonment and decommissioning services. With over 30 years experience in the international oil and gas market, we provide flexible and reactive engineering solutions from the installation and maintenance of the structure through to decommissioning at the end of field life.

CASE STUDY – Proserv Offshore

Proserv Offshore were awarded a major subsea cutting contract by SapuraAcergy, for the decommissioning of the Iwaki platform off the north-east coast of Japan. Situated in 154m (505ft) of water, the eight-legged, 20,735-metric

ton (22,856-ton) platform was the largest in the region scheduled for decommissioning.

Proserv Offshore supplied all the cutting equipment and services required, which included Jetcut Water Abrasive Cutting Systems, Diamond Wire Cutting Systems and Friction Disc Cutters. Whilst some of the tooling already existed, Proserv Offshore had to develop the 24” to 42” Saddle Pipe Cutter, Launch Runner Cutting Tool and 62” to 80” Diamond Wire Cuting Tool. Each of these tools had to meet demanding design parameters set by the client which included fully integrated fly-to-site capabilities with SapuraAcergy’s Work Class ROV’s. All the new tooling was designed and developed within 14 weeks using Proserv Offshore’s in-house engineering and manufacturing capabilities.

Once the trials were complete, the equipment was prepared at each regional base and mobilised to the S3000 heavy lifting vessel so the cutting operations could commence. A total of 34 structural cuts were performed which were completed successfully for the client on time and within budget.

Prospect28 Carden Place AB10 1UPTel: +44 (0)1224 651831Email: [email protected]

Prospect is an innovative engineering solutions provider to the worldwide energy industries. Whether developing a new concept, working through detailed designs or optimising ongoing operations, Prospect’s wealth of practical engineering experience and array of advanced engineering technologies adds value to your project and wider business activities.

ProtEx (UK) Limited2 Ellerbeck CourtTS9 5PTTel: +44 (0)1642 714181Contact: Ms Sarah WilliamsEmail: [email protected]

Sub sea systems design: design, installation, commissioning certification, audits risk assessments inspection, maintenance & testing training sub sea high integrity pressure protection systems hydraulic power units and systems sub sea power and communications systems design safety related systems design: SIL determination FMEA & FMECA inspection, installation & testing certification & maintenance asset management: RAM studies performance standard development integrity audits.

QA Weld Tech LtdBowes Road, Riverside Park Ind. Est. Middlesbrough TS2 1LUTel: +44 (0)1642 222831Contact: Charles TigheEmail: [email protected]



paniesP-R

QAWT offer specialist welding, inlay and machining of products for the offshore, nuclear, power generation, petro-chemical and engineering industries in carbon & low alloy steels through to duplex s/s, nickel alloys and inconel cladding. It has over 500 pre-qualified welding procedures and extensive weld cladding capacity using the latest computer controlled welding equipment together with pipe fabrication capacity in segregated workshops for both low alloy and duplex steels. The company is a world leader in the manufacture of flowbends for subsea equipment for the oil & gas industry.

Quadrant EPP UK LtdWoodhouse RoadTodmordenLancs OL14 5TPTel: +44 (0)1706 811000Contact: John watkinsEmail: [email protected]

Quadrant’s Monocast cable sheaves are being used extensively on offshore equipment due to their reduced weight, corrosion resistance and kindness to wire ropes, leading to longer rope life. Sheaves, rings and discs up to 3 metres in diameter can be produced as one piece castings, while larger diameters can be provided in segmented form. Quadrant also produces track plates for ROV’S, scoring two firsts in 2008 with the manufacture and supply of 2metre-plus plates for the world’s two largest Rock Trenchers on two separate contracts. Quadrant is the world’s largest manufacturer of engineering plastic products.

RBG LimitedNorfolk House, Pitmedden RoadDyce, Aberdeen AB21 0DPTel: +44 (0)1224 722 888Contact: Nigel WilmottEmail: [email protected]

RBG is the leading provider of Inspect, Assess and Repair (IAR) services to the global energy industry and has an unrivalled portfolio of marine and subsea services from fabrication to test and

deployment. RBG’s integrated service offering means the company can fully support quayside and subsea construction, repair and upgrade programmes and deliver expert services including subsea intervention, fabrication, IRM & upgrades and bolt solutions. RBG’s breadth of capability differentiates the company in a competitive marketplace and ensures that it offers clients a truly flexible solution.

Responsive Engineering GroupKingsway South, Team ValleyGateshead NE11 0SHTel: +44 (0)191 4973400Contact: Joseph ButlerEmail: joe.butler@responsive-engineering.comwww.responsive-engineering.com

Responsive Engineering Group has a business model rarely, if ever, replicated within the UK. Through one portal, customers can access high precision CNC machining, specialist welding & fabrication, pressing, assembly & test operations as well as profiling using the latest waterjet & laser technologies. Each set of processes is embedded within it’s own division & customers have the option to access single divisions or the services of all four according to their needs. Each division is responsible for it’s own performance and meeting group KPI’s.

Resys Engineering Services Ltd5 Bennachie Rise, AlfordAberdeenshire AB33 8FGTel: +44 (0)7500 703 505/606Contact: Nigel ForsythEmail: [email protected]

Resys Engineering Services specialise in the design, build and installation of hydraulic, electro hydraulic and electrical control systems and offer associated hydraulic consultancy, project engineering and management services both on and offshore, across a wide range of industries including marine, subsea, oil and gas, power generation and lifting equipment.

RiserTec Limited Westhill Business CentreAberdeen AB32 6UFTel: +44 (0)1224 330 520Contact: Jonathan JuryEmail: [email protected]

RiserTec, formed 2003, is an independent Aberdeen design and engineering consultancy, specialising in riser and subsea projects for a wide range of international clients; providing technically advanced analysis, practical based experience, prototype development, bespoke solutions and sub-contract manufacture. An extensive proprietary range of polyurethane accessories has been developed for the demanding subsea applications of risers, cables and umbilicals. Products include: Static + Dynamic Bend Stiffeners (DBS) Bend Restrictors. Sealing + Clamping Systems.

Rolled AlloysUnit 16 Walker Industrial ParkBlackburn, Lancs BB1 2QETel: +44 (0)1254 582 999Contact: Mike DunnEmail: [email protected]

Rolled Alloys is the global leader in speciality alloys, offering heat and corrosion resistant, aerospace, titanium, and stainless alloys. From locations in North America, Europe, and the Pacific Rim we serve customers of all sizes, supplying and processing high performance metals to the thermal process, chemical process, power generation, aerospace, oil and gas, pulp and paper, and desalination markets. Rolled Alloys vast inventory includes more than two dozen grades of nickel, stainless, duplex, titanium and super alloys in plate, sheet, bar, pipe and fittings, and welding materials.


irec

tory

of U

K Su

bsea

Com

pani

es

RPS309 Reading RoadHenley-on-Thames RG9 1EL Tel: +44 (0)1491 415400Contact: Liane ButcherEmail: [email protected]

RPS is a global multi-disciplinary consultancy, providing expert advice on the exploration and production of energy and other natural resources, the development of land, property and infrastructure and the management of the environment and the health and safety of people. Our Energy team provides integrated technical, commercial and project management support services in the fields of geoscience, engineering and HS&E to the energy sector from offices in North & South America, Europe, Australia, South East Asia and the Middle East.

RSL NDT LtdUnit 9, Murcar Commercial ParkBridge Of Don, Aberdeen AB23 8JWTel: +44 (0)1224 822600Contact: Scott Stephen General ManagerContact: Andrew Anderson, Managing DirectorEmail: [email protected]

We supply a comprehensive range of NDT equipment and consumables specifically designed for Subsea use. These include Flooded Member Detection Sysems, Subsea MPI Systems and Subsea Digital Ultrasonic Flaw Detection Systems.

Saint-Goabin IsoverSaint-Gobain IsoverUK Commercial CentreGotham Business ParkLeake Road GothamNottinghamshire NG11 0LBTel: +44 (0)115 969 8009Contact: Alistair MacphersonEmail: [email protected]

Since 1665, Saint-Gobain has consistently demonstrated its ability to invent products that offer solutions to the major challenges of energy efficiency and environmental protection. With a presence in 64 countries some of the best known and respected companies are part of Saint-Gobain. Together these businesses offer an unrivalled range of products and innovative material solutions meeting the most exacting performance and legislative standards. Saint-Gobain’s businesses form a robust, integrated supply chain partner that has the strength and flexibility to support the most diverse range of customer requirements. As well as fast, efficient access to a comprehensive range of products, we can provide specialist technical expertise and resources.

Sandvik Materials TechnologyManor way, HalesowenB62 8QZTel: +44 (0)121 504 5151Contact: Sergio QuattrocchiEmail: [email protected]

Sandvik Materials Technology it’s a global manufacturer of stainless steel and high alloys, for demanding application such us O&G upstream, downstream, process plants, nuclear, power generation and green energy. Its 9000 workforce , will assist the customer beginning from the material selection.The main shape in which Sandvik offer it tubular, billet, bar hollow bar tube and pipe, supplied from stock or thru mill run SMT is able to provide strip, wire, welding consumables, power babased product (HIP), fitting and flanges and welded pipe, produced inhouse or outsourced.

Sandwell UK Ltd2 Foundry PlaceTowcesterNorthants NN12 6FPTel: +44 (0)1327 350205Email: [email protected]

Sandwell UK Ltd are specialists in Shot Peening and anti corrosion coatings. It has developed novel methods for shot peening complex components both externally and internally as well as enhancing thread performance in areas of high contact loads. The company works closely with engineers and designers to develop engineering solutions using shot peening to increase component life and performance. The coatings division specialises in low friction and anti corrosion coatings to improve performance at component level and can offer a range of application specific coatings.

Schlumberger Subsea SurveillancePitmedden South Units 18-22 Kirkton Av DyceAberdeen AB21Contact: Domitille GuillonEmail: [email protected]/surveillance

Subsea Surveillance provides communication and monitoring systems for structural integrity, flow assurance and process optimization of subsea assets, including risers, pipelines, flowlines and other critical elements of the subsea infrastructure.

Score Subsea and Wellhead LimitedShed 3, WellbankPeterheadAberdeenshire AB42 3GLTel: +44 (0)1779 485250Contact: Phil NicolsonEmail: [email protected]

As part of the renowned Score Group of companies, Score Subsea and Wellhead Limited, situated in Peterhead, Scotland offer our global Oil and Gas Industry clients the following services from their new multimillion pound (GBP) facility. Uniquely engineered fast-track Topsides to Subsea Valve & Actuation solutions to support the specialised needs of the Major and Independent Operator’s Marginal and Deepwater field Developments. Our dedicated and technically qualified team of engineers



paniesR-S

and project managers also offer independent and impartial advice on the optimum choice of valve for any Subsea service to provide project stability from conceptual design though to completion.

SEAL-TITE UK LLCUnit 10 Airside Business ParkAB21 0GTTel: +44 (0)1224 773838Contact: Jed DoubenmierEmail: [email protected]

Seal-Tite International provides engineered leak analysis and repairs. Seal-Tite uses a Proprietary pressure-activated sealant technology to cure leaks downhole, subsea and on control systems without the use of a rig. Seal-Tite has offices worldwide. Keywords Safety Valve leaks, Wellhead leaks, Tubing leaks, Casing leaks, Valve leaks, Actuator leaks, Control line leaks, Umbilical leaks, Tubing hanger leaks, Casing hanger leaks, Microannular leaks, PBR leaks, Subsea wellhead leaks, Subsea control line leaks.

SMD LimitedTurbinia Works, Davy BankNE28 6UZContact: Victoria BosiEmail: [email protected]

SMD is one of the world’s leading manufacturers of remote intervention equipment, working in hazardous environments worldwide. The product portfolio includes the world’s largest range of subsea remotely operated vehicles (ROVs) and specialist trenching vehicles; as well as tidal generation devices, subsea mining equipment and specialist equipment for use in nuclear decommissioning. Customers span a range of sectors: Renewables, oil & gas, nuclear, telecoms, mining, naval / military and scientific. SMD is headquartered near Newcastle, with offices in Yorkshire, Singapore, the US and Brazil.

SolutionsBridge House, 56-68 Bridge Street Aberdeen AB11 6JNTel: +44 (0)1224 213033Contact: Cerri McDonaldEmail: [email protected]

IT Support Provider Solutions have developed a portfolio of web based Oil & Gas related applications and systems for Logistics, Personnel, Competency, Asset & Service Tracking worldwide. Onboard Solutions is a customised fully integrated range of software that helps overcome industry challenges using web technology for: Crew & Team Planning People on Board Logistics Travel Planning Certification & Training Compliance Asset & Equipment Tracking Certification Compliance Performance Monitoring Downtime Analysis Service & Maintenance Emergency Contacts HR Management Training & Competency QHSE.

Sonomatic LtdUnit 1 The Energy Development Centre Claymore DriveBridge of Don AB23 8GDTel: +44 (0)1224 823960Contact: Ryan PhippsEmail: [email protected]

Sonomatic® is the market leader in the development and provision of ultrasonic inspection services and products serving the oil and gas, power generation and defence sectors. Sonomatic® is a specialist supplier to the offshore industry for more than 25 years, for example pioneering the use of techniques such as Time of Flight Diffraction (TOFD) and corrosion mapping, providing independent pigging verification of upstream oil and gas pipelines

CASE STUDY – Sonomatic Ltd

Sonomatic is a market leader in the development and provision of automated non-destructive ultrasonic inspection for subsea operations, a fact they were able to demonstrate recently to BP.

BP needed a high-resolution inspection system capable of carrying out zero degree corrosion mapping on the bottom half of a buried 14-inch pipeline with a further 2” piggyback line standing 4” above it. The pipelines were situated in the Southern North Sea at a depth of approximately 45 metres, and although this is not beyond diver accessibility, strong currents meant that an inspection using an ROV (Remotely Operated Vehicle) would be necessary.

Sonomatic responded by developing an ROV-deployed automated inspection system. Once specific areas of concern had been identified, and the area excavated and cleaned, Sonomatic deployed the tool directly onto the pipeline. It was held in position by hydraulic clamps and then controlled by Sonomatic’s technicians working in tandem with ROV pilots.

The inspection tool was connected to a control system – or pod – located on the ROV, and all data transferred back to the surface via the ROV umbilical. This allowed real-time review of the inspection data and real-time analysis allowed decisions on any further high-resolution scanning to be made quickly, so that all the requirements could be addressed in one operation.

Although the ROV-iT 2000 was developed to meet BP’s specific requirements, the design team created a flexible tool that could be easily adapted, and Sonomatic is already applying the technology to meet the requirements of other clients.


irec

tory

of U

K Su

bsea

Com

pani

es

Sparrows BariconSeton House, Denmore RoadBridge of Don, Aberdeen AB23 8JWTel: +44 (0)1224 704868Contact: Mike GibbEmail: [email protected]

Sparrows Baricon is a global supplier of pipe and cable handling equipment for the storage, deployment and recovery of subsea pipelines, flow lines, control lines and cables. Services include:

Design & build solutions for: ■ Complete pipe and cable lay systems;

carousels, tensioners, reel drives & under-rollers

■ Project management from design through to manufacture, installation, test, commissioning, operation & maintenance

■ Tensioner Hire Equipment – 3Te-36Te (2 and 4 track) – Operation & maintenance – Spare parts supply

Specialist Subsea Services31-33 St Clements Street AB11 5FUTel: +44 (0)1224 569910Contact: Dave EllisonEmail: [email protected]/

Specialist Subsea Services Ltd (S³) has been founded upon a successful period of development which started in 2007. The management team with investor support are continually looking to take the Company forward on a strong footing. Through S³’s expertise and core capabilities in ROV’s, Survey, geotechnical and Subsea Intervention Management including Ship Management, it offers the following services within the offshore oil and gas and renewables industry on an international basis: Offshore installation and construction support services encompassing route and site surveys. IRM services. Decom.

Speciality Welds LtdUnit 1, Rawfolds WayCleckheaton BD19 5LJTel: +44 (0)1274 879867Contact: David J. KeatsContact: Email: [email protected]

Underwater welding consultants and specialist welder training providers for welding above and below the waterline. Manufactures of welding equipment and consumables. Official Zurich welding surveyors.

Subsea 7Subsea 7 East Campus, Arnhall Business Park, Prospect Road WesthillAberdeenshire AB32 6FETel: +44 (0)1224 526000Email: [email protected]

Subsea 7 enables its clients to access a high-end, well diversified fleet, comprising 42 vessels supported by extensive fabrication and onshore facilities able to deliver the full spectrum of subsea engineering, construction and services.

SubSea Consultants International Portencross, West KilbrideAyrshire KA23 9QATel: +44 (0)1294 823355Contact: Robert McKeeEmail: [email protected]

Subsea Consultants International has 28 years of active experience in the subsea, underwater and marine industry. At Subsea Consultants International we provide our clients with a range of subsea services that includes: consulting, engineering, project management, operations support and subsea asset integrity management services. We focus on and specialize in projects/activities in the subsea, underwater and marine environment.

Subsea Deployment Systems Ltd.10 Beechwood Gardens, WesthillAB32 6YEEmail: [email protected]

SDS Ltd. offers a low cost method of installing large subsea structures without using a Heavy Lift Vessel. It can also install larger structures, in greater water depths and in more environmentally hostile locations than is possible with a conventional lifted installation. The main benefits are:- Largely failsafe and low tech. Low sensitivity to weather (wave & ice). Installation capacity of up to several 1000t. Suitable for water depths of up to 3000m. Potentially greater availability compared to HLVs. Low cost. A step change for the installation of subsea structures.

Subsea SuppliesUnit 27, Murcar Commercial ParkDenmore Road, Aberdeen AB23 8JWTel: +44 (0)1224 705181 Contact: Andy SmithEmail: [email protected]/

Subsea Supplies is an independent company that specialises in supplying vital electrical components/equipment to the subsea commercial, oceanographic and defence sectors. With a combined industry experience exceeding 60 yrs, our staff represent the world`s leading manufacturers of proven subsea products across a broad spectrum of underwater activity including Nexans Norway AS (for ROV umbilicals/tethers), Cooper-Interconnect (for Burton & Electro-Oceanics connectors), AK Industries (for Hydrovolt connectors), Masto (for wire lubrication systems), Sun-Star (for submersible motors) & Clear-Com.



paniesS-T

Systech InternationalChapter House, 18-20 Crucifix Lane London SE1 3JWTel: +44 (0)20 7940 7656Contact: Geoff AnsellEmail: [email protected]

Systech International provides full project lifecycle support offering contractual, project controls, risk management, planning and scheduling, claims, expert witness and dispute resolution services on global energy projects from our key energy offices in Houston, London, Doha and Singapore. We have significant experience within the offshore oil and gas and renewable energy sectors having worked on an array of projects from subsea tiebacks to off-shore wind farms. We represent a range of stakeholders including NOCs, IOCs, energy companies, international contractors and specialist contractors and our teams have access to a wide range of support tools including cutting edge visualisations.

Tachart Ltd t/a Bolt & Nut ManufacturingWhite Lea Road, SwintonRotherham S64 8BHTel: +44 (0)1709 570212Contact: Mr Patrick HinderEmail: [email protected]

Tachart Ltd manufacters special fasteners and bespoke machined components for critical applications including components & fasteners for subsea & Marine environments. Special Fasteners and Machined Components. Quantities from 1-2000. Components made from high performance & exotic alloys. Fully traceable and Certified Components. ISO 9001 accredited. Components of the Highest Quality. Competitive Pricing. Same day Production & Delivery for Urgent situations. High quality certification. Highly experienced in the Oil & Gas, Defence and Energy sectors.

TE ConnectivitySite H,Faraday Road – DorcanWiltshire, Swindon SN3 5HHTel: +44 (0)7712 078870Contact: Martyn CookEmail: [email protected]/ADM

TE is focused on the offshore and marine industries and is technologically equipped to meet your toughest challenge. We offer a broad portfolio of products, including wire and cable, connectors, heat shrink tubing, fiber optics, relays, and labeling. Our Rochester and Raychem brand cables are designed and manufactured for specific harsh environment applications and have a proven pedigree in performance, reliability and quality. Newer technologies have focused on optical fiber for data transmission.

Teer Coatings Limited (Miba Coatings Group)West Stone HouseBerry Hill Industrial Estate, Droitwich Worcestershire WR9 9ASTel: +44 (0)1905 827 550Contact: Dr Kevin CookeBusiness Development ManagerEmail: [email protected]

Teer Coatings Ltd, part of Miba Coating Group, provides high performance physical vapour deposited coatings and coating equipment. Applications include anti-galling, self-lubrication, wear resistance, anti-erosion and corrosion protection. These coatings have excellent adhesion, providing outstanding protection even under high mechanical loads. The coating process easily creates graded compositions and mechanical properties. Previously incompatible metal or alloy systems can be combined and complex multi component ceramics (e.g. oxides or nitrides) can be deposited with low interfacial stress.

Titanium Engineers Ltd.Unit 1 Coleshill Trade ParkStation Road, ColeshillBirmingham B46 1ATTel: +44 (0)1675 464200Contact: Tony LawrenceEmail: [email protected]

Titanium Engineers specialises in the development and manufacture of components in high strength titanium alloys such as Ti-6-4, Ti 6-2-4-6 and Beta C. Applications include downhole oilfield components and undersea pressure housings. Parts can be manufactured on a turnkey basis for both prototype and production from stocks of raw material held in our Birmingham warehouse. Technical support is available from qualified metallurgists and engineers to assist in the application of the unique characteristics of titanium.

TracercoPavilion 11Belasis Hall Business ParkBillingham TS23 4EATel: +44 (0)1642 375500Email: [email protected]

Tracerco is a world leading industrial technology company, providing unique and specialised detection, diagnostic and measurement solutions, to petroleum industry customers throughout the world In the subsea sector, the Company provides a range of advanced, non-intrusive inspection services to provide operators with vital condition based measurements helping them to determine real-time flow conditions and verify the integrity of their assets.


irec

tory

of U

K Su

bsea

Com

pani

es

Transvac Systems LimitedMonsal House DE55 4RHTel: +44 (0)1773 831100Contact: David AingeEmail: [email protected]

Transvac is a world leader in Ejector technology solutions for the subsea industry. Using IP gained over 35 years supported by a new state-of-the-art research, development and functional test facility, Transvac can provide innovative Ejector technology for subsea processing applications. With no moving parts and no maintenance Transvac’s Ejector technology is an ideal solution for subsea processing. All Transvac subsea Ejectors are designed, manufactured and tested in-house. Transvac supplied the first subsea processing Ejector on the TORDIS project for Statoil.

CASE STUDY – Transvac Systems

In August 2010, Transvac Systems, were awarded a major contract by FMC technologies for the supply of pressure boosting and flushing Jet Pumps for Petrobras’ Marlim subsea separation project.

Marlim is a Petrobras operated field, 110 km offshore Rio de Janeiro under 650 to 2,600 metres of water. It was once the world’s largest subsea development, with 129 wells and 8 floating production units. Marlim has now been operating for 20 years and is producing an increasing amount of water and sand. This limits the oil handling capacity of the surface facilities.

FMC was contracted to supply a subsea separation and pumping system for the Marlim field, to debottleneck the floating production facility and increase production by removing unwanted water from the production stream, at the seabed. The system will also use water re-injection to increase reservoir pressure and boost production.

FMC turned to Transvac for a custom designed ‘Ejector Solution’ and not for the first time. The two companies had worked before on the TORDIS project – the World’s first full-field subsea separation system with boosting and injection, for which Transvac supplied a super duplex Ejector.

Transvac Jet Pumps for Marlim include special ceramic wear resistant internals and will undergo full flow performance mapping using Transvac’s R&D facility flow loop system.

Tritech Peregrine RoadWesthill Aberdeen AB32 6JLTel: +44 (0)1224 744111Contact: Suzanne MenziesEmail: [email protected]

Tritech International Limited [Tritech] specialises in the production of high performance acoustic sensors, sonars, video cameras and mechanical tooling equipment for professional underwater markets including; defence, energy, engineering, survey and underwater vehicles. Tritech remains the industry leader in the provision of sensors and tools for ROV and AUV markets. Tritech is based in Westhill, Aberdeenshire, Scotland, with its design and manufacturing base located in Ulverston, Cumbria, UK. In 2006, Tritech became part of Halma p.l.c., a global safety, health and sensor technology group.

Tyco Fire & Integrated Solutions (UK) LtdOcean Trade CentreMinto AvenueAltens Industrial EstateAberdeen AB12 3JZTel: +44 (0)1224 293500Contact: Graham MarshallEmail: [email protected]

At Tyco Fire & Integrated Solutions we utilise our extensive experience and technical ability to supply control systems and chemical injection packages to the energy industry worldwide. We can provide complete design, supply, installation and commissioning for wellhead, process & control and chemical injection packages. Service agreements can be tailored to meet client specific needs, whether on or offshore, and our dedicated manpower teams and equipment ensure that we have the resources to support this. We offer ‘through-life’ support customised to specification, timescale & budget.



paniesT-U

Tyco Flow ControlCrosby RoadMarket Harborough Leicestershire LE16 9EEContact: David SinsouEmail: [email protected]

Tyco Flow Control is a leading manufacturer and marketer of valves, actuators and controls, providing market leading products, services, and solutions for the most challenging applications throughout the oil and gas industry.

Unique System (UK) LtdUnit 1&2 Murcar Commercial ParkDenmore RoadBridge of DonAberdeen AB23 8JWTel: +44 (0)1224 853999Contact: Rob PhillipsEmail: [email protected]

Unique System (UK) Ltd offers an extensive range of products, services and turnkey solutions to the diving and survey industries in the North Sea. Established in 2009, Unique System (UK) is part of the Unique Maritime Group, a leading global provider of specialist integrated services for hydrographic survey, offshore construction, oceanographic, environmental, non-destructive testing, ROV and diving equipment sales and rentals.

Universal Engineering Group18 Cumberland Drive, DT4 9TDTel: +44 (0)1305 783525Contact: Mark BlundenEmail: [email protected]

Our subsea activities range from front end design to system fabrication, assembly, commissioning, testing and Project Management. Universal Engineering has a proven track record for supplying subsea systems on time, within budget and to the highest quality standards. Subsea fabrications supplied include: Subsea Distribution Units Umbilical Termination Assemblies Hydraulic Distribution Modules Electrical Distribution Units Subsea Control Module Bodies SCM Guide Funnels Mudmats Shipping Baskets We also have nsite radiographic facilities. At Universal Engineering, safety is paramount.

UTEC Survey Construction Services Ltd.49/51 Ann StreetAB25 3LH Tel: +44 (0)1224 636 677Contact: Colin ErskineEmail: [email protected]

UTEC Survey, one of the world’s largest independent offshore survey companies, provides a wide range of offshore survey and geotechnical services to clients worldwide. Headquartered in Houston, with offices in Aberdeen, Singapore and Perth, the company enjoys a reputation for providing highly professional, customer-focused services and innovative solutions for both deep and shallow water applications.

VBC Group Ltd12 Pavilion WayLoughborough LE11 5GWTel: +44 (0)1509 218008Contact: Paul WilkinsonEmail: [email protected]

Manufacturer and distributor of specialist welding and joining materials and equipment. Materials meet exacting requirements (quality acceptance based on aerospace industry requirements) and are fully technically supported.

Vector International UK LtdBaglan Industrial ParkUnit 16, Port TalbotWest Glamorgan SA12 7BYTel: +44 (0)1639 822 555Contact: Chris LeeEmail: [email protected]

Vector is a major single source supplier of compact sealing solutions for the Oil & Gas subsea and topside markets. It’s core products : the OPTIMA Subsea ROV operable subsea connector, the SPO Compact Flange and the TECHLOK Clamp connector. All 3 products use our metal-to-metal sealing technology offering a very high integrity and therefore making it the most reliable connectors in today’s market. Other important benefits are minimisation of weight and space, installation time and maintenance cost. The Optima subsea connector and SPO Compact Flange both cover pressure classes up to 15,000psi.


irec

tory

of U

K Su

bsea

Com

pani

es

Viper Subsea LtdUnit 8 Middle Bridge Business ParkBristol Road, Portishead BS20 6PNTel: +44 (0)1275 390008Contact: Neil DouglasEmail: [email protected]

Viper Subsea is a developer of class leading controls and distribution solutions and supplier of expert consultancy for the subsea oil and gas and offshore renewables industries. Viper offers complete distribution solutions, including mechanical, hydraulic, electrical and optical engineering covering all aspects from design through to equipment delivery. In the key field of asset integrity management, including controls maintenance, obsolscence management and subsea electrical integrity management, a comprehensive solution is offered including a range of innovative proprietary products.

Vulcan SFMSheffield Forgemasters International Ltd. Brightside Lane Sheffield S9 2RWTel: +44 (0)114 244 9071Contact: Nick HartleEmail: [email protected]

The leading supplier of large castings and forgings to the Offshore Oil & Gas industry. Structural Components for Fixed and Floating Production and Drilling Units. Riser System Stress,Keel, Tension and Transition Joints Mooring Systems Pad Eyes, Connectors Tendon, Systems LAJ’s, Tendon Connectors and Porches Subsea Processing Systems Pump components, Wyes, Wellhead components.

Webster & HorsfallHay Mills B25 8DWTel: +44 (0)121 772 2555Contact: Vaida RinkeviciuteEmail: [email protected]

Webster & Horsfall are one of the UK’s leading manufacturers of Wire and Strip providing bespoke products to a diverse range of clients throughout Europe, North America and Asia. Based in the city of Birmingham the industrial heartland of England, Webster & Horsfall have been at the forefront of Wire & Strip manufacturing for three centuries. Webster & Horsfall combine their wealth of experience with state of the art modern technology to manufacture and supply the highest quality Wire & Strip products for the world we live in today.

Webtool SubseaRoyal Works, Atlas StreetClayton Le MoorsLancashire BB5 5LWTel: +44 (0)1254 615100Contact: Keith ElliotEmail: [email protected]

Webtool (a tradename of Allspeeds Ltd.) design and manufacture subsea and topside cutting and gripping tools for intervention and decommissioning projects. We have over 25 years experience supplying solutions worldwide to subsea operators. Our standard range of ROV operable tools includes: Wire rope cutters up to 250mm diameter. Flexible riser and umbilical cutters up to 350mm diameter. Soft line cutters up to 135mm diameter. Wire gripping and lifting up to 200mm diameter, with 20 tonne lift capacity We also design and manufacture bespoke products to suit customer specific applications.

Weir Valves & Controls UKBritannia HouseHX5 9JRTel: +44 (0)1422 282000Contact: Mark Grayson WoodEmail: [email protected]

Weir Power & Industrial delivers end-to-end whole plant solutions to nuclear, fossil-fired and renewable power stations, as well as industrial activities. We specialise in the provision of products and services that enhance performance, increase efficiency and reduce downtime.

Our capabilities span all aspects of plant life, from new build, through to life extension and plant upgrades. Our portfolio of internationally accredited safety and control valves and pump equipment is complemented by a comprehensive range of engineering service solutions.

Welaptega Marine UK Ltd.Unit 6, Bourtree ComplexMinto Drive, Altens Industrial EstateAberdeen AB12 3LWTel: 1 902 422 8303Contact: Mr. Alastair TrowerEmail: [email protected]

Welaptega Marine UK’s ground-breaking underwater technologies have been adapted for use in demanding offshore environments to protect personnel, the environment, production, and the reputation of offshore operators. Welaptega provides 2 types of service – Mooring integrity technologies to ensure the long term security of permanently installed mooring systems, through quantitative in-water inspection. – Advanced post-incident response; unique in-water 3D-Modeling capabilities to assess geometry of damaged subsea architecture, assisting with repair, operation and replacement strategies.



paniesV-Z

Well Ops UKHelix House, Kirkton DrivePitmedden Rd Ind Est, DyceAberdeen AB21 0BGTel: +44 (0)1224 351800Contact: Iain W. Morrice Business Acquisition ManagerEmail: [email protected]

Well Ops is the established market leader in rigless well intervention; providing fast, flexible & high quality subsea well management solutions. Well Ops is a business unit of Helix Energy Solutions an international services and oil & gas production company. With specialist well intervention/saturation diving vessels and rigless intervention systems worldwide, Well Ops ensures maximum productivity and efficiency of the Operators subsea well through well maintenance and production enhancement. Well Ops focus is to provide a complete turn-key service; vessels, equipment & project management.

Wellstream International LtdWellstream HouseWincomblee Road, Walker RiversideNewcastle upon Tyne NE6 3PFTel: +44 (0)191 295 9000Contact: Laura StoutEmail: [email protected]

Wellstream is a leading designer and manufacturer of bespoke offshore flexible pipeline products, systems and solutions for oil and gas transportation. Our pipeline portfolio includes established product lines such as dynamic flexible risers and static flowlines for deep and ultra-deepwater environments, and high temperature/high pressure products for drilling applications. Wellstream’s product portfolio is further enhanced by varied installation offerings, delivering innovative cost effective solutions to meet the most demanding of project needs.

WFS Energy & Environment7 Houstoun Interchange Business ParkEH54 5BZTel: +44 (0)845 862 6600Contact: Ian CrowtherEmail: [email protected]

WFS is the world’s leading supplier of through-water and through-ground wireless radio frequency (RF) systems for communication, navigation and power transfer. Wireless connectivity products and services deliver cost savings and new capabilities to the subsea Oil & Gas industry. WFS is working with world leaders to deliver value in the areas of subsea control modules, wireless sensors and connectors, subsea and subsurface telemetry, AUVs and ROVs, condition monitoring and integrity management.

Wood Group KennyCaledonian House, 234 Union StreetAberdeen AB10 1TNTel: +44 (0)1224 538400Contact: Patrick O’BrienEmail: [email protected]

Wood Group Kenny has five subsidiary businesses, namely J P Kenny, MCS Kenny, MSi Kenny, Wood Group Integrity Management (WGIM) and SgurrEnergy. The three Kenny businesses specialise in subsea engineering and project management. WGIM specialises in all-of-asset integrity management, and SgurrEnergy is a leading renewable energy consultancy. The combined Wood Group Kenny organisation provides engineering technology, management and integrity solutions throughout the life cycle of oil & gas and renewable energy projects from concept phase through detail design into operation and abandonment. Wood Group Kenny has over thirty years experience in the oil and gas industry. We currently have approximately 1700 personnel, largely engineering professionals and project and asset management specialists, in 20 offices worldwide.

Zenith Oilfield Technology Ltd.Thainstone Business ParkInverurie AB51 5GTTel: +44 (0)1467 628866Email: [email protected]

Zenith designs, develops and delivers pioneering technology to enable optimum recovery from customer wells through the gathering and analysis of downhole data and the design of generic and bespoke completion equipment. Providing state-of-the-art technology Zenith enables customers to access reserves in the most efficient and profitable manner. Since inception over seven years ago, Zenith has rapidly become the independent leader in downhole monitoring systems.

A Guide to UK Subsea Capability 49Subsea Com

panies Key Services

Subsea CompaniesKey Services

Targeted exploration led to over 60 exploration and appraisal wells drilled in the UK Continental Shelf during 2010. One third of these were successful, adding up to 400 million barrels of oil and gas to UK reserves

50 A Guide to UK Subsea CapabilitySu

bsea

Com

pani

es K

ey S

ervi

ces

Acoustic Positioning, Control & Monitoring Equipment and ServicesAC-CESS Co UK Ltd P12

Applied Acoustic Engineering Ltd P14

Bartec-Vodec Ltd. P14

CCOMM P16

Coastline Surveys Ltd P17

Hima-Sella LtdTrue P24

Invensys Systems (UK) Ltd. P26

Kongsberg Maritime Ltd P27

National Physical Laboratory P30

Nautronix P31

NCS Survey P31

Nortek UK P32

Online Electronics P34

Tritech P42

Unique System (UK) Ltd P43

WFS Energy & Environment P45

Subsea Companies Key Services

C

A B

Asset Integrity ManagementActeon Group Ltd P12

AMEC Training & Development Services P13

Bureau Veritas P16

DAI Energy P18

Deepwater EU Ltd. P18

flexlife P22

GL Noble Denton P23

MACAW Engineering P29

ProtEx (UK) Limited P36

Schlumberger Subsea Surveillance P38

Solutions P39

Sonomatic Ltd P39

SubSea Consultants International P40

Tracerco P41

Viper Subsea Ltd P44

Well Ops UK P45

Buoyancy/Flotation Aubin Ltd P14

Balmoral Offshore Engineering P14

Offspring International Ltd P32

Oldham Engineering Ltd P33

Bend Stiffeners/RestrictorsBalltec Ltd. P14


Cognity P17

First Subsea Ltd P21

Oglaend System UK P33


PDM Neptec Ltd P35

Quadrant EPP UK Ltd P37

RiserTec Limited P37

Vulcan SFM P44

Cables and Protection Equipment and ServicesBalmoral Offshore Engineering P14

Caparo Dynamics P16

CTC Marine Projects Limited P18

Engineering Technology Applications Ltd. (ETA) P20

Integrated Subsea Services Ltd P25

J+S Ltd P27

JCE Energy P27

Modus Limited P30

NSW Technology Ltd P32


PDM Neptec Ltd P35


Subsea Supplies P40

TE Connectivity P41

Webster & Horsfall P44


panies Key Services

D

Coating SystemsAdvanced Insulation Systems P12

AJT Engineering Ltd P12

Bodycote P15

Darron SBO P18

Diamond Hard Surfaces Ltd P19

Exova P21

Forum Energy Technologies P22

Hertel UK Ltd P23

IHWT Radyne P24

International Paint Ltd P26

ITW ROCOL P26

Lone Star LWD Precision Engineering Ltd P29

Sandwell UK Ltd P38

Teer Coatings Limited (Miba Coatings Group) P41


Corrosion Management, Monitoring, ControlAC-CESS Co UK Ltd P12

Cranfield University P17


Diamond Hard Surfaces Ltd P19

Exova P21

Flexitallic Ltd P21

Hertel UK Ltd P23

HOUGHTON PLC P24


IODS Pipe Clad Ltd. P26


Osiris Marine Services Ltd P34

Sandwell UK Ltd P38

Sonomatic Ltd P39

Cryogenic Equipment and ServicesBodycote P15

EW FUEL MANAGEMENT LTD P20


TYCO FLOW CONTROL P43

DecommissioningActeon Group Ltd P12

Aubin Ltd P14


Buchan Technical Services Limited P16

Bureau Veritas P16

CSL P17

Cutting Underwater Technologies P18

EPC Offshore P20

Equalizer International Ltd P20

Hertel UK Ltd P23

Hydro-Dynamics Ltd P24

Jee Ltd P27

NCA – Norse Cutting & Abandonment Ltd P31

Oil States MCS Limited P33


PDL Solutions (Europe) Limited P34

Proserv Offshore P36

Resys Engineering Services Ltd P37

SEAL-TITE UK LLC P39


Subsea Deployment Systems Ltd. P40

Webtool Subsea P44

Well Ops UK P45


bsea

Com

pani

es K

ey S

ervi

ces


D

Design and Conceptual Study ServicesCognity P17

CSL P17

Edgen Murray Europe Limited P19


EPC Offshore P20

Forth Steel Ltd P22

Fugro Subsea Services Ltd P22

GL Noble Denton P23

Intermodal Innovation P26

Jee Ltd P27

Koso Kent Introl Limited P28


OMB Offshore Applications Limited P33


PDM Neptec Ltd P35

Penspen Ltd P35

Peritus International P35

Petrofocus Ltd P35

Prospect P36

Sparrows Baricon P40


Wood Group Kenny P45

Diving/ROV/Submersible Services continuedInspectahire Instrument.Co. Ltd P25


Modus Limited P30


Oceanscan Ltd P32


RBG Limited P37


Specialist Subsea Services P40

Speciality Welds Ltd P40

Subsea 7 P40


Subsea Supplies P40

TE Connectivity P41


Well Ops UK P45


Drilling & Well Intervention

Cognity P17

Exceed (XCD Limited) P20

Hillfoot Multimetals P24

Independent Forgings and Alloys Ltd P25


Newburgh Engineering P31

Niche Products Ltd P32

Petrofocus Ltd P35

Precision Polymer Engineering Ltd P35


Titanium Engineers Ltd. P41

Transvac Systems Limited P42


Well Ops UK P45


Diving/ROV/Submersible ServicesAC-CESS Co UK Ltd P12

ALL OCEANS Engineering Ltd P13

Arthur Smith (Grimsby) Ltd P14

Bowtech Products Ltd P16

CCOMM P16



Divex P19

DOF Subsea UK P19





panies Key Services

Education & TrainingAMEC Training & Development Services P13





Jee Ltd P27

Marketec P29

Mercuri Urval P30

RPS P38

Solutions P39


Systech International P41

Electrical Connection/Distribution EquipmentCaparo Dynamics P16

Cordell Group Limited P17

Expro Connectors and Measurements P21

J+S Ltd P27

JCE Energy P27



PDM Neptec Ltd P35

Subsea Supplies P40

TE Connectivity P41


Emergency Planning and ResponseBriggs Marine & Environmental Services P16

McMurdo Ltd P29

RPS P38

Solutions P39

Equipment Rental ServicesACE Winches P12

Buchan Technical Services Limited P16



Griffon Hoverwork Ltd P23

Inspectahire Instrument.Co. Ltd P25


Measurement Devices Ltd P30

Modus Limited P30

Mooring Systems Ltd P30

Oceanscan Ltd P32


Tritech P42

Tyco Fire & Integrated Solutions (UK) Ltd P42


E


bsea

Com

pani

es K

ey S

ervi

ces

F


Failure & Forensic InvestigationExova P21



Sandwell UK Ltd P38

Flow Assurance Equipment and ServicesAdvanced Insulation Systems P12

Aubin Ltd P14

Beck Prosper Limited P15

Flowmaster Limited P22

GL Noble Denton P23


Master Flo Valve UK Ltd P29

Pacson Limited P34

Penspen Ltd P35


Prospect P36


Score Subsea and Wellhead Limited P38

Tracerco P41

Weir Valves & Controls UK P44


Fabrication & MachiningACE Winches P12


Allied International UK Ltd P13

Arc Energy Resouces Ltd P14

Beauford Engineers Limited P14


Bendalls Engineering P15

Bodycote P15


Darron SBO P18

Doncasters Group Limited P19


Forth Steel Ltd P22

Hertel UK Ltd P23

IHC Engineering Business Ltd P24


International Piping Products P26

L&N (Scotland) Ltd. P28

Linvic Engineering Ltd P28


Maher Ltd P29

MLT Group Limited P30

Neville Roe Industries Ltd. P31


Nylacast Ltd P32


QA Weld Tech Ltd P36


Responsive Engineering Group P37

Rolled Alloys P37

Sandwell UK Ltd P38

Tachart Ltd t/a Bolt & Nut Manufacturing P41

Titanium Engineers Ltd. P41


Universal Engineering Group P43

Vector International UK Ltd P44

Vulcan SFM P44

Geohazard and Site InvestigationApplied Acoustic Engineering Ltd P14


RPS P38

UTEC Survey Construction Services Ltd. P43

G


panies Key Services

I

H

Geophysical / Geotechnical ServicesApplied Acoustic Engineering Ltd P14



CodaOctopus Products Ltd P17

NCS Survey P31


Hydraulic Equipment & ServicesACE Winches P12



Caparo Dynamics P16



HOUGHTON PLC P24

Hydrasun Limited P24

Neville Roe Industries Ltd. P31


Pressure Tech Ltd P36



Sandvik Materials Technology P38



Tritech P42




Webtool Subsea P44

Inspection, Repair and MaintenanceAC-CESS Co UK Ltd P12



Bodycote P15

Briggs Marine & Environmental Services P16

Bureau Veritas P16

CSL P17

DOF Subsea UK P19

flexlife P22



Hertel UK Ltd P23


Innospection Ltd P25



ITW ROCOL P26

JCE Energy P27




LHR Marine Ltd P28


Modus Limited P30


Oceanscan Ltd P32






RBG Limited P37


bsea

Com

pani

es K

ey S

ervi

ces

I


Installation & CommissioningAubin Ltd P14



CCOMM P16


DELMAR NORTH SEA LTD P18

DOF Subsea UK P19



GPS PE Pipe Systems P23

Hima-Sella Ltd P24



JCE Energy P27


Pipe Coil Technology Ltd P35




Subsea 7 P40

Subsea Deployment Systems Ltd. P40


Integrity Management & MonitoringBowtech Products Ltd P16


DAI Energy P18



flexlife P22

Hima-Sella Ltd P24


Jee Ltd P27


Marketec P29


Solutions P39

Sonomatic Ltd P39

Welaptega Marine UK Ltd. P45

Wellstream International Ltd P45


Zenith Oilfield Technology Ltd. P45

Marine/Subsea handling & Mechanical Connection Systems


Balltec Ltd. P14


bigHead Bonding Fasteners P15










M

Inspection, Repair and Maintenance continuedResponsive Engineering Group P37

RSL NDT Ltd P38



Sonomatic Ltd P39



Subsea 7 P40

Tracerco P41






panies Key Services

Maritime Security


Measurement/Metrology/NDT Equipment and ServicesInspectahire Instrument.Co. Ltd P25


Oceanscan Ltd P32

RSL NDT Ltd P38





Medical / Emergency Response Equipment and ServicesN/A

Mooring/ Buoy SystemsACE Winches P12

Acteon Group Ltd P12


Balltec Ltd. P14





LHR Marine Ltd P28

Mooring Systems Ltd P30

Nortek UK P32

Nylacast Ltd P32

Offspring International Ltd P32


Penspen Ltd P35


Vulcan SFM P44



Marine/Subsea handling & Mechanical Connection Systems continuedIODS Pipe Clad Ltd. P26



SMD Limited P39



Vulcan SFM P44

N

Naval Architecture Caparo Dynamics P16



Forth Steel Ltd P22

GL Noble Denton P23

Prospect P36

Navigation Equipment and ServicesCaparo Dynamics P16

McMurdo Ltd P29

NCS Survey P31


Tritech P42


bsea

Com

pani

es K

ey S

ervi

ces


Pipelines Rigid / Flexible SupplyAllied International UK Ltd P13

Dunlop Oil & Marine Ltd P19







Nylacast Ltd P32



Positioning ServicesCoastline Surveys Ltd P17




McMurdo Ltd P29

Measurement Devices Ltd P30

Nautronix P31

NCS Survey P31



Project Management ServicesBriggs Marine & Environmental Services P16


CSL P17

DAI Energy P18


Energy Alloys UK Ltd P20


EPC Offshore P20


flexlife P22

GL Noble Denton P23





Prospect P36


RPS P38


Subsea 7 P40


Systech International P41

Well Ops UK P45

Pipeline Rigid/Flexible Design, Inspection & Testing ServicesBowtech Products Ltd P16


DOF Subsea UK P19

Exova P21

flexlife P22

Innospection Ltd P25

Jee Ltd P27

Nylacast Ltd P32


Penspen Ltd P35


Prospect P36



Sonomatic Ltd P39



P


panies Key Services

Q

Quality, Health, Safety and EnvironmentAMEC Training & Development Services P13


Bureau Veritas P16


EPC Offshore P20


GE Oil & Gas P23

Marketec P29


RPS P38

Solutions P39

R

Remotely Operated VehiclesAC-CESS Co UK Ltd P12



CCOMM P16


DOF Subsea UK P19




HOUGHTON PLC P24



Modus Limited P30


Oceanscan Ltd P32



RBG Limited P37

SMD Limited P39


Subsea Supplies P40

Subsea Control & Monitoring Equipment and ServicesAdvanced Insulation Systems P12

Aker Subsea Limited P12


BEL Valves Ltd P15

Bureau Veritas P16

CCOMM P16

DAI Energy P18



Framo Engineering P22

GE Oil & Gas P23


Hima-Sella Ltd P24

HOUGHTON PLC P24

J+S Ltd P27

JCE Energy P27


Nautronix P31



Oliver Valvetek Limited P33

Pacson Limited P34



Tracerco P41


Weir Valves & Controls UK P44



S


bsea

Com

pani

es K

ey S

ervi

ces


Subsea Handling Equipment and ServicesACE Winches P12



Balltec Ltd. P14


Divex P19








Marketec P29


Pacson Limited P34


RBG Limited P37



Webtool Subsea P44

Subsea Instrumentation and SensorsAker Subsea Limited P12

BEL Valves Ltd P15


Divex P19


GE Oil & Gas P23



J+S Ltd P27

K Controls Ltd P27


Litre Meter Limited P28


Nortek UK P32



Pressure Tech Ltd P36

Subsea Supplies P40

Tracerco P41

Tritech P42



Subsea Mechanical Connection SystemsBalltec Ltd. P14

bigHead Bonding Fasteners P15

Cognity P17







PDM Neptec Ltd P35




S


panies Key Services

T

Subsea Production SystemsAker Subsea Limited P12


BEL Valves Ltd P15

Forth Steel Ltd P22


GE Oil & Gas P23

Infield Systems Limited P25




Marketec P29

Master Flo Valve UK Ltd P29










TE Connectivity P41






Test FacilitiesAJT Engineering Ltd P12

Applied Acoustic Engineering Ltd P14


Exova P21








Thermal InsulationAdvanced Insulation Systems P12

Aubin Ltd P14



Saint-Goabin Isover P38

Thrusters & Propulsion SystemsDoncasters Group Limited P19



SMD Limited P39


bsea

Com

pani

es K

ey S

ervi

ces

W

U


Underwater Cutting equipment and ServicesActeon Group Ltd P12

Divex P19






RBG Limited P37


Webtool Subsea P44

Welding Products, Equipment and ServicesAJT Engineering Ltd P12

Allied International UK Ltd P13

Arc Energy Resouces Ltd P14


Bodycote P15



Darron SBO P18

Forth Steel Ltd P22





Responsive Engineering Group P37

Rolled Alloys P37



VBC GROUP LTD P44


Umbilical/Riser Equipment and ServicesActeon Group Ltd P12

Advanced Insulation Systems P12

Aker Subsea Limited P12







HOUGHTON PLC P24


J+S Ltd P27




Nylacast Ltd P32




Penspen Ltd P35



Rolled Alloys P37


Subsea 7 P40

TE Connectivity P41

Vulcan SFM P44

HELPING YOUR BUSINESS GROW INTERNATIONALLY

A range of UK Government support is available from a portfolio of initiatives called Solutions for Business (SfB). The “solutions” are available to qualifying businesses, and cover everything from investment and grants through to specialist advice, collaborations and partnerships.

UK Trade & Investment is the Government Department that helps UK-based companies succeed in the global economy, and is responsible for the delivery of the SfB product “Helping Your Business Grow Internationally”.

We also help overseas companies bring their high-quality investment to the UK’s dynamic economy – acknowledged as Europe’s best place from which to succeed in global business.

UK Trade & Investment offers expertise and contacts through its extensive network of specialists in the UK, and in British embassies and other diplomatic offices around the world. We provide companies with the tools they require to be competitive on the world stage.

For further information please visit www.ukti.gov.uk or telephone +44 (0)20 7215 8000.

Whereas every effort has been made to ensure that the information given in this document is accurate, neither UK Trade & Investment nor its parent Departments (the Department for Business, Innovation and Skills, and the Foreign and Commonwealth Office) accept liability for any errors, omissions or misleading statements, and no warranty is given or responsibility accepted as to the standing of any individual, firm, company or other organisation mentioned.

The paper in this document is made from 50 per cent recycled waste pulp with 50 per cent pulp from well-managed forests. This is a combination of Totally Chlorine Free and Elemental Chlorine Free. The inks are vegetable oil-based and contain resins from plants/trees and the laminate on the cover is sustainable, compostable and can be recycled.

Published July 2011 by UK Trade & Investment © Crown Copyright URN 11/1203

guide to uk subsea capability for the oil and gas industry

Documents

spo compact flange

diamond hard surfaces

arc energy resouces

iods pipe clad

uk continental shelf

ew fuel management

selected trade associations

teer coatings limited