galaxy tab s 10.5 speakers replacement · starting with the right speaker, remove the 10 mm...

Galaxy Tab S 10.5 Speakers ReplacementSpeaker replacement guide for a Galaxy Tab S 10.5.

作成者: Jordan Soto

Galaxy Tab S 10.5 Speakers Replacement 下書き： 2018-08-02ガイド ID: 50661 -

ã “ã ®æ–‡æ›¸ã ¯2019-12-06 06:50:46 AM (MST)ã «ä½œæˆ ã •ã‚Œã ¾ã —ã Ÿã€‚

© iFixit — CC BY-NC-SA jp.iFixit.com ãƒšãƒ¼ã‚¸7ã ®1

はじめにはじめに

This guide will give step by step instructions on how to remove and replace both speakers in aSamsung Galaxy Tab S 10.5.

ツールツール:Tweezers (1)iFixit Opening Tools (1)Phillips #1 Screwdriver (1)Phillips #00 Screwdriver (1)

部品部品:Galaxy Tab S 10.5 Right Speaker (1)Galaxy Tab S 10.5 Headphone Jack

Assembly (1)




https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=Galaxy+Tab+S+10.5+Right+Speaker&_sacat=0&LH_TitleDesc=0&_osacat=0&_odkw=Galaxy+Tab+S+10.5+Right+Speaker

手順手順 1 — Disassembling Galaxy Tab S 10.5 Back Cover

Place the plastic opening tool into the SD card slot or charge port.

Try in an upward motion until you see a separation between the tablet and back cover.

手順手順 2

Work around the entire device bysliding the plastic opening toolaround the rim.

If this is the first time, it will be hardto separate the back cover from thetablet.

The clips are approximately 5 cmapart. While working around thedevice, the clips will make adislocating sound whendisconnected.




手順手順 3

Remove the back cover once alllinks have been separated.

Be careful when touching any of theinternal components of the tablet.

手順手順 4 — Speakers

Starting with the right speaker, remove the 10 mm Phillips #000 screws.

Use the spudger to begin pulling out the speaker.

Wedge the spudger beneath the amplifier to remove it from the adhesive holding it down.




手順手順 5

Remove the two 10mm Phillips #000 screws that hold the left speaker.

手順手順 6

Take a pair of tweezers anddisconnect the left battery.




手順手順 7

Use the same pair of tweezers to begin removing the left speaker.

There are three slots surrounding the speaker that can be used to remove it.

手順手順 8

Pull the speaker out and lay it to the side until the rest of the connections are disconnected.




To reassemble your device, follow these instructions in reverse order.

手順手順 9

There are four slots that are located along the border that can be used to remove the strip that isglued to the side.

Wedge the tweezers in each slot to carefully remove the strip.




galaxy tab s 10.5 speakers replacement · starting with the right speaker, remove the 10 mm...

Documents