ayl soundfit speaker replacement - the-eye.eu guides/ayl soundfit speaker... · introduction use...

6
AYL SoundFit Speaker Replacement Replace the speaker in your AYL SoundFit. Written By: Sajal Kherde AYL SoundFit Speaker Replacement © iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 6

Upload: lamnhi

Post on 07-Oct-2018

224 views

Category:

Documents


0 download

TRANSCRIPT

AYL SoundFit Speaker ReplacementReplace the speaker in your AYL SoundFit.

Written By: Sajal Kherde

AYL SoundFit Speaker Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 6

INTRODUCTION

Use this guide to replace the speaker of the AYL SoundFit.

TOOLS:Heavy-Duty Spudger (1)

Phillips #0 Screwdriver (1)

Soldering Workstation (1)

2.5 mm Hex Bit (1)

Solder (1)

Soldering Station (1)

Pro Tech Toolkit (1)

AYL SoundFit Speaker Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 6

Step 1 — Motherboard

Unscrew the four hex screws on thetop of the device using a 2.5mm hexscrewdriver.

Step 2

Place a spudger between the blackplastic cover and the green case.

Pry the black cover away from themain casing and remove the cover.

AYL SoundFit Speaker Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 6

Step 3

Place the spudger tool between theblack housing, which contains thewoofer, and the outer rubber casing.

Pry the housing away from the bodyto reveal the motherboard, speaker,and battery.

Step 4

Remove the two Phillips screws which are holding the battery casing on the housing using a PH00Phillips screwdriver.

Remove the battery case to reveal the battery.

AYL SoundFit Speaker Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 6

Step 5

Using a soldering iron, heat up andremove the positive and negativebattery contacts from themotherboard.

Step 6

Remove the three Phillips screws which are holding the motherboard to the base using a PH00Phillips screwdriver.

The motherboard can now be wiggled free from the base.

AYL SoundFit Speaker Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 6

To reassemble your device, follow these instructions in reverse order.

This document was last generated on 2017-06-22 04:15:25 PM.

Step 7 — Speaker

Using a soldering iron, heat up andremove the positive and negativewire contacts from the motherboard.

Step 8

Remove four Phillips #1 screws todetach the speaker form the module.

Extract the speaker from the body ofthe AYL SoundFit.

AYL SoundFit Speaker Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 6 of 6