fp100 fr cable - bbccable.com · fp100 ® performance ... methods for current rating “enclosed in...
TRANSCRIPT
A brand of the
l
FP100®
Performance Standards
> 450/750 V and 600/1000 V> BS 6387:1994 Cat C (950±40°C for 180 mins)> BS 6387:1994 Cat W (650±40°C for 30 mins)> BS 6387:1994 Cat Z (950±40°C for 15 mins)> EN 50267-2-2:1999> EN 61034-2:2005> IEC 60331-21:1999> Use in screwed steel conduit to achieve f ire rating> LPCB Approved> Low smoke, zero halogen, flame retardant
Core identification o red o brown o black o yellow o orangeo grey o blue green/yellow
Other core colours available on request
Conductor Plain annealed copper stranded (class 2) conductor.
InsulationMineral ceramic (Mica/Glass) fire resistant tape. 90°C high performance cross linked mineral filled insulation.
Key Applications > Essential safety circuits where the cable is protected by metal conduit.> May be used for emergency lighting, fire alarm systems not requiring a twisted cable or other essential services.
Ref
:FP1
00/1
2/20
17
THE FIRE RESISTANT SOLUTION FOR STEEL CONDUIT
Certificate No 077c, 077p
CABLE DESCRIPTION
FIRE RESISTANT CABLES LOW VOLTAGE
600/1000 V *
FP100®
Temperature Range-25 to +90ºC≠
Bending Radiusup to 8mm diameter r=4D above 8mm diameter r=6D
Mechanical impactRequires protection
Fire PerformanceBSEN60332-1-2
FlexibilitySemi-flexible
Halogen FreeBSEN50267-2-1
Low Smoke EmissionsBSEN61034-2
Fire ResistantIEC 60331-21
BS6387 Category CW Z*EN50200 PH120*BS8434-2 120min**W hen tested in Steel Conduit
Tempreture Range-25 to +90°C
Bending Radiusup to 8mm diameter r=4Dabove 9mm diameter r=6D
Mechanical impactRequires rotection
Fire performanceBS EN 60332-1-2
FlexibilitySemi-flexible
Halogen FreeBS EN 50267-2-1
Low Smoke EmissionsBS EN 61034-2
Fire ResistantIEC 60331-21
BS 6387 Category CWZEN50200 PH120*
> * Sizes 1.5 - 10mm2 are rated at 450/750V.> Installation methods for current rating “Enclosed in conduit on a wall or in trunking” in accordance with BS7671/IEE Wiring Regulations. > Minimum recommended installation temperature -5°C.> The tabulated ratings are based upon a 30°C ambient temperature at 90°C operating temperature.> For other ambient temperatures or where several circuits are grouped together, the following rating factors should be applied.
Notes to table
Temperature ratings factor
Rating Factors for Groupings
Overseas sales enquiriesTel: +44 (0) 23 8029 5481Fax: +44 (0) 23 8029 5465
Overseas technicalTel: +44 (0) 23 8029 5481Fax: +44 (0) 23 8029 5002
Information hotlineTel: +44 (0) 23 8029 5029Fax: +44 (0) 23 8029 5437
Sales enquiriesTel: 0845 767 8345Fax: 023 8029 5465
UK Technical helplineTel: 0845 767 8345Fax: 023 8029 5002
Prysmian Cables & Systems LimitedChickenhall LaneEastleighHampshireSO50 6YUUnited Kingdomwww.prysmiangroup.co.uk
Ref
: FP1
00/1
2/20
17For further information pleasesee our dedicated FP Cables website:www.fpcables.co.uk
A brand of the
Nominal cross
sectional area
mm2
Approximate cable
weight
kg/km
Maximum conductor resistance
at 20°C
Ω/km
Current rating
DC or single phase AC
Amps
Current rating Three
phase AC
Amps
Volt drop DC
mV/A/m
Approximate overall
diameter
mm
Short circuit rating(1 sec)
Amps
Volt drop Single
phase AC
mV/A/m
Volt drop Three
phase AC
mV/A/m
Single Core1 .5* 3.5 26 12.1 215 23 20 31 31 27
2.5* 4.1 38 7.41 360 31 28 19 19 16
4* 4.6 54 4.61 570 42 37 12 12 10
6* 5.2 75 3.08 860 54 48 7.9 7.9 6.8
10* 6.6 120 1.83 1425 75 66 4.7 4.7 4
16 7.7 180 1.15 2275 100 88 2.9 2.9 2.5
25 9.0 270 0.727 3375 133 117 1.85 1.9 1.65
35 10.0 360 0.524 5000 164 144 1.35 1.35 1.15
50 11.7 490 0.387 7150 198 175 0.99 1.05 0.9
70 13.2 680 0.268 10000 253 222 0.68 0.75 0.65
95 15.3 940 0.193 13575 306 269 0.49 0.58 0.5
120 16.8 1160 0.153 17150 354 312 0.39 0.48 0.42
150 18.7 1440 0.124 21450 393 342 0.32 0.43 0.37
185 20.8 1800 0.0991 26450 449 384 0.25 0.37 0.32
240 23.5 2350 0.0754 34325 528 450 0.19 0.33 0.29
300 27.3 3000 0.0601 42925 603 514 0.155 0.31 0.27
400 32.5 3970 0.0470 57225 683 584 0.120 0.29 0.25
500 36.0 4980 0.0366 71525 783 666 0.093 0.28 0.24
630 40.0 6340 0.0283 90125 900 764 0.072 0.27 0.23
Ambient Temperature°C 25 30 35 40 45 50 55 60
Rating factor 1.02 1.00 0.96 0.91 0.87 0.82 0.76 0.71
Number of circuits 2 3 4 5 6 7 8 9
Rating factor 0.80 0.70 0.65 0.60 0.57 0.54 0.52 0.50
3rd
June, 2009
TO WHOM IT MAY CONCERN
Dear Customers,
Approval for Single Core Fire Resistant Cable – BS6387 C,W,Z
(FP100, FP300)
This letter is to advise you that our single core fire resistant cable, FP100 (insulated only)
and FP300 (insulated and sheathed) is accredited to BS6387 C,W,Z with LPCB certificate
077c and 077e respectively. This is also recognised by the Hong Kong Fire Services
Department.
Since single core fire resistant cable is not published with BS standard, both FP100 and
FP300 could not be type tested with BASEC. Therefore, there is no BASEC product
certificate available for single core fire resistant cable.
Both of the FP100 and FP300 are under the guarantee policy of Prysmian.
Yours sincerely,
Stephen Lam
Area Manager
Prysmian Hong Kong Holding Limited
Room 1010-11, Lu Plaza T (852) 2311 1554
2 Wing Yip Street F (852) 2366 1227
Kwun Tong
HONG KONG
BF1345 Rev. 0.2 Page 1 of 3 © BRE Global Ltd, 2014
This Certificate is maintained and held in force through regular surveillance activities and subject to the corresponding ISO 9001 Certificate being maintained.
David Hoare 16 September 2014 13 May 2013 Signed for LPCB Certification Scheme Manager Date of Issue Date of First issue
This certificate and appendix remain the property of BRE Global Ltd and is issued subject to terms and conditions (for details visit www.redbooklive.com/terms).
To check the validity of this certificate and appendix please visit www.redbooklive.com/check, scan the QR tag or contact us.
LPCB is part of BRE Global Ltd, Garston, Watford, WD25 9XX T: +44 (0)333 321 8811 F: +44 (0)1923 664603 E: [email protected]
Certificate of Product Approval Certificate Number: 077p Issue: 04
PRYSMIAN CABLE & SYSTEMS LIMITED
Chickenhall Lane Bishopstoke Eastleigh Hants SO50 6YU United Kingdom
is authorised to use the LPCB mark in association with the product(s) listed in this certificate and appendix having complied with the requirements of the standard(s) detailed below:
Product(s) Standard(s) (see Appendix for details) Cable Types as listed below: FP100 LSOH
See Certificate Appendix for details
BS 6387:2013 (Category CWZ) EN 50267-2-1:1999 EN 61034-2:2005 IEC 60331-21:1999
BF1345 Rev. 0.2 Page 2 of 3 © BRE Global Ltd, 2014
Appendix to Certificate No: 077p Issue: 04 PRYSMIAN CABLE & SYSTEMS LIMITED
This Certificate is maintained and held in force through regular surveillance activities and subject to the corresponding ISO 9001 Certificate being maintained.
David Hoare 16 September 2014 13 May 2013 Signed for LPCB Certification Scheme Manager Date of Issue Date of First issue
This certificate and appendix remain the property of BRE Global Ltd and is issued subject to terms and conditions (for details visit www.redbooklive.com/terms).
To check the validity of this certificate and appendix please visit www.redbooklive.com/check, scan the QR tag or contact us.
LPCB is part of BRE Global Ltd, Garston, Watford, WD25 9XX T: +44 (0)333 321 8811 F: +44 (0)1923 664603 E: [email protected]
Product name LPCB Ref. No.
FP100 LSOH 077p/01
Nominal csa of conductor (mm2) Core Construction BS 6387 EN 50267-2-1 EN 61034-2 IEC 60331-21
1.5 One(1) C,W,Z(2,3) <0.5% HCI >60% Complies(4)
2.5 One(1) C,W,Z(2,3) <0.5% HCI >60% Complies(4)
4.0 One(1) C,W,Z(2,3) <0.5% HCI >60% Complies(4)
6.0 One(1) C,W,Z(2,3) <0.5% HCI >60% Complies(4)
10 One(1) C,W,Z(2,3) <0.5% HCI >60% Complies(4)
Uo/U 600/1000 V
Notes: 1. Stranded conductor only. 2. Where a single cable is fitted in a conduit, only phase to earth voltage was applied. 3. To satisfy the requirements of BS 6387:2013, for Categories C,W,Z testing was conducted using a 20mm
stainless steel conduit as the other metallic element. 4. The FP100 LSOH cables met the requirements of IEC 60331-21:1999 when tested at a temperature of 950ºC
for a duration of 90mins + 15mins cool down, at a voltage rating of 600V.
Cross-Listed products and alternative branding are detailed on page 3.
BF1345 Rev. 0.2 Page 3 of 3 © BRE Global Ltd, 2014
Appendix to Certificate No: 077p Issue: 04 PRYSMIAN CABLE & SYSTEMS LIMITED
This Certificate is maintained and held in force through regular surveillance activities and subject to the corresponding ISO 9001 Certificate being maintained.
David Hoare 16 September 2014 13 May 2013 Signed for LPCB Certification Scheme Manager Date of Issue Date of First issue
This certificate and appendix remain the property of BRE Global Ltd and is issued subject to terms and conditions (for details visit www.redbooklive.com/terms).
To check the validity of this certificate and appendix please visit www.redbooklive.com/check, scan the QR tag or contact us.
LPCB is part of BRE Global Ltd, Garston, Watford, WD25 9XX T: +44 (0)333 321 8811 F: +44 (0)1923 664603 E: [email protected]
LPCB Ref No. Model No. Alternative Model No. Labelled Distributors Cert/Ref No.
077p/01 FP100 LSOH
1.5mm2 - 10mm2
FT SIFER 950i OHLS
1.5mm2 - 10mm2 Draka UK Ltd 1134g/01
TO WHOM IT MAY CONCERN For FP100 077p issue we received the response letter by FSD, we could use on-line certificate to convince FSD officer. http://www.redbooklive.com/search/displaycompany.jsp?sectiontype=1&companyid=352&productgroupid=3074§ionid=24&searchgrouptypeid=13&searchgroupid=0&id=677