FORM-ADVISOR

C3P Engineering Software International, All Rights Reserved 2012FORM-ADVISOR, STAMP-ENGINEER, CAST-DESIGNER, CAST-ENGINEER, GEO-DESIGNER is a trademark of C3P Engineering

Software International Co.,Limited. All other logos, trademarks used herein are the property of their respective owners.

30 minutes

1 hour

1 day{

Upfront design & analysis software for stamping process design

to validate a design solution

to compare 4 to 5 solutions

to design one stamping process

Why Form-Advisor?

Built-in process design capabil it ies for rapidly

creating, validating and comparing design solutions.

The 1st increment-based CAE solution fully integrated

with the MCAD environment, simulating all stamping

phenomenon in a few clicks.

The easiest, fastest, powerful solution to bringing CAE

validation to daily design process. The software is

based on the familiar CAD environment for all design

activates and CAE simulation, eliminating the gap of

CAD and CAE and reducing the learning curve to

minimum. No CAE background required.

Unique for design:

Unique for validation:

Unique for engineer:

Form-Advisor is fully integratedinto the MCAD systems (suac asPTC's Creo system) .After the partand/or die face design, one buttoncan shift between Form-Advisor'sprocess design and designvalidation interface. Alloperations are in the sameenvironment.

Form-Advisor uses the templatetechnology to define the objectsand process parameters, reducingthe workload for operations to theminimum. A few clicks to define allthe objects and properties in theMCAD environment.

PowerView is used to display thesimulation results . It is apowerful, flexible and easy-to-usetool for stamping process analysis.

Why MCAD System Integration?

Synchronous design and validation is necessary in a

business where ‘ ’ is key.

Works within the modern 3D MCAD systems and

user’s native assemblies for simulation. Reduce

learning curve for new system.

CAD driven simulation. When you make a design

change in your MCAD system, you will see the change

instantly in Form-Advisor.

Allows for the design, simulation and engineering

decisions to be handled by the same person from day

one of the project.

Time to Market

3 Steps from design to validation

1

2

3

The first increment-based design and CAE solution for sheet metal forming fullyintegrated with MCAD systems, providing most accurate and feasible results forautomotive and progressive stamping.

FORM-ADVISOR for MCADThe Form-Advisor, an unique sheet metal forming solution for automotive andprogressive stamping base on the incremental technology, now directly workswithin MCAD environments. It is the new generation metal forming CAE systembuilt from day one specifically for integration within the design process.

This integration not only improves the consistency of design data in CAD andsimulation system, but also greatly improves the speed and efficiency of designand engineering cycles.

This innovative software puts metal flow, thinning and wrinkle, stress and strain,springback analysis into the hands of the same people who are responsible fordeveloping the stamping product, mould and making engineering decisions.

Simulation driven by CAD data

With Form-Advisor, your CAD geometry drives thesimulation process. When you make a design change inCAD system, you see the change instantly in Form-Advisor in a few clicks. It's hassle free.

The user does not have to be an expert in simulation andthe time required for evaluating a stamping design isremarkably quick. In other word, Form-Advisor can helpthe industry achieve the target of 'Time to Market'.

The Stamping Process Works (SPW) module, specialized for processplanners and tooling designers, enables rapidlycreating a stampingprocess design and generating a die face for the complete stampingprocess. SPW is not only used for typical one stage stamping widely butalso very useful for progressive die design. The application of SPWincludes automotive, electronics, consumer applications and manyothers.

SPW can speed up the process design ten times the speed of thetraditional CAD method. As a result, process planners or die designercan generate several different tooling concepts and stages plans at avery early stage and send them to CAE system for validation. With SPWin Form-Advisor, 4 to 5 design solutions can be designed and validatedin a single working day.

The first increment-based design and CAE solution for sheet metal forming fullyintegrated in MCAD systems, providing the most accurate and feasible results,requiring only 2 hours to compare two design solutions.

Form-Advisor in CATIA

Plan ASingle Stage

Plan B2 Stages

Stamping Process Works

Form-Advisor in NX Form-Advisor in Solidworks

A 3D part of automotive industry Filling the part holes and addendumof following stages

Define the drawing feature of the first stage and generate the dieface for validation. With its powerful Boolean operation functions,SPW caneasily and directly extract features from 3D part.

The designed holding face and addendum for the second stage of drawing.SPW helps generate the die face. Key parameters , such as drawing depth,draft angle and fillet radius are fully defined in parametrically. The totallead time of modeling was less than 30 mins.

Time: 0:25 Time: 1:45

Time: 1:05

Time: 0:50

Time: 1:30

Time: 2:15

Corner Crack Part Safe

Part

Time: 0:00

Fill Holes

Time: 0:10

Extremely simple user interface, fullyintegrated into MCAD environment, fullyassociative and regenerative to drasticallyreduce downstream design changes

Using template design technology, processsetup is very simple and logical. The user canfocus on the stamping process andengineering improvements rather thangrappling with using software.

Simplicity in defining progressive stampingand multiple-stage forming. Suitable for allstamping processes

It is well known the traditional numerical simulation iseither not suitable or too expensive for the conceptualstage. The data to run a numerical simulation is usuallynot available yet, e.g. the full die face geometry. This isusually requires several hours or even days. Setting upthe whole simulation model is also a difficult job.

Form-Advisor balances robust functionality with easy of use, allowinguser to solve at least 90% of problems encountered in the engineeringindustries in an express and effective manner.

Form-Advisor provides the userwith unstricted capabilities andcan handle more than 90%industry’s needs in the MCADenvironment. However, someusers would seek a fuller solutionwith advanced functionality formore complicated jobs, and for thiswe present Form-AdvisorProfessional.

Form-Advisor Professionalprovides a stand-alone interfacespecialised for more advanced jobsor complicated processes. Thesoftware houses a powerful 3DCAD and meshing system, and also

comes with a multitude ofadvanced modules such as:

S :provides geometry compensationcapability for springback in die face

: provides the solidelements capabilities for specialapplications, such as ironing orlight forging

:provides part level stampinganalysis capability and quick blanksheet prediction

pringback compensation

Solid Forming

Local flange & One step analysis

Upfront Analysis vs Traditional Simulation

Tonnage estimationDraw-slit analysisAsymmetric holding calculationBending Springback calculationForming margin estimationLaser welded blank formingBlanksheet outline optimizationStamping feature simulationDrawbead computationSpringback alertSplit and crack alertsStiffness analysisMaterial flow analysisLubrication suggestionSurface defects alertsMaterial formalities studyStabilization of progressive stamping

A Resultsnalysis

Wrinkle tendencyUndercutStrain pathDraw inThickness & thinningMaterial flow vectorSpringback zones &magnitudeSkid lineUser defined diagramStiffness analysis

Flatness predictionStrain and StressContact forceNormal pressureSectionsProcess animationBlank outline optimizationForming limited diagram

Best Class of Form-Advisor

Design, Meshing and Model Setup

Solver Technology

Built-in, next generation fully automaticmeshing technology,

.

Built-in SPW (Stamping Process Works)technology,

A complete solution chain, from metalforming part, to process design creationand die face generation, to numericalsimulation in the very early stage.

Suitable for any type of CAD datawith powerful CAD defect repairing.

ten times faster thantraditional CAD methods.

NO MESH CONCEPTTO USER

Based on incremental technology ratherthan one step simulation.

The built-in solver kernel includes Impactand Aster technologies, the merits of whichhave been proven by the industry widely inthe past 20 years. Built-in Stamp-Engineeradvanced solver technology.

Couples explicit incremental solver andimplicit solver together, performing thewhole range simulation of metal forming,includes gravity, holding/closing,stamping/forming and springback

Special design for automotive stamping andprogressive stamping process, support thinblank and thick blank forming, suitable forcomplex 3C parts.

Accurate physics modeling, efficientcalculation of the formability based on the diedesign.

Rich simulation result. Includes safety zones,forming zones, FLD analysis, splitting,thinning, wrinkling, thickening, material flowand draw-in, stress, strain, optimal blankshape, light strip and skid mark, flatness andspringback etc.

Initial blank Forming progress Formed part FLD Trimming Springback

Form-Advisor Professional Industrial Capabilities

FORM-ADVISOR SUPPORT MCAD SYSTEM

CAD SYSTEM

PTC/CREO

SIEMENS/NX

SolidWorks

SUPPORT VERSION

WF V4 - Creo 2

V5 - V8.5

2009 - 2012

Software language: English, Japanese, Korean, Chinese

Stamping feature study is an uniquefunction of Form-Advisor Professional forprecision stamping. It can study the detailparameters of stamping features and usefor progressive stamping widely.

Form-Advisor vs Traditional CAD & CAE

2D Templates

The user interface of Form-Advisor Professional,

with OPEN CASCADE technology

Traditional

CAD + CAEForm-Advisor

Process design +

Die face generation

(i.e. for 2 stages)

>5h 30 mins

CAE Modeling & Setup 1h 10 mins

CAE simulation time 5h 1.5h

Design #1 >1 day 2 hours

Modify geometry 3h 20 mins

CAE Modeling & re-setup 1h 10 mins

Re-run the 2nd route

simulation5h 1.5h

Design #2 1 day 2 hours

Try 4-5 cycles 5 days 1 day

Partnerships

With the combination of software development, advanced analysis, extensive product developmentexperience and cost effective local human resources, C3P Engineering Software International Co., Limitedprovide industry and manufacturing business with comprehensive solutions and engineering services on aglobal basis to meet their expectation in high quality, on-schedule delivery within cost target. Our businessscope covers software development, professional engineering service and application software integration.More info please visit: www.c3p-group.com | www.cast-designer.com

About C3P Software

Material Database

Over 300 kinds of traditional stamping materials are integrated,including aluminum alloy, stainless steel, soft steel, HSS & toolsteel, all generated from material makers.

Multiple steel indexes are complemented such as JIS, DIN, UN &SEA. User defining is supported without limits.

Progressive Die

Stamping velocity and multi-stages are the key factors in theprogressive stamping field, but small features and highaccuracy requirements in progressive die processes needs amore robust and more fast simulation engine.

With parallel calculation shortening the simulation time greatly,Form-Advisor accumulates over 15 years of experiences in theprecision stamping field.

Springback Compensation

The powerful dual-solver of Form-Advisor offers both explicit &implicit methods to solving the springback problems. The newgeneration of solver technology is optimized for different typesof processors that the accuracy and work rate touch topattitude.

Auto Penal Springback for Coffee Machine Casing Progressive Stamping Frame Part

Die Compensation Auto PillarSurface quality, Wrinkle and Scratch

HONGKONG (Asia Pacific, HQ)

12/F AT Tower180 Electric RoadNorth Point, Hong Kong

Tel: +852 2566 8109Fax: +852 2234 5811Email: C3PHK@c3p-group.com

NEW YORK OFFICE

9631 Field Stone ct,Painted post, New York,14870, USA

Tel: +1 607 330 4772Fax: +1 607 330 4776Email: C3PNY@c3p-group.com

Maryland OFFICE

3360 North Chatham Rd., Suite L,Ellicott city, MD 21042, USA

Tel/Fax:+1 410 465 7865Email:C3PNY@c3p-group.com

SUPPORT CENTER

Unit 603, Info Building,No.111Science Avenue GSC,GZ, 510663

Tel: +86 20 3229 3257Fax: +86 20 3205 3354

CNEmail: C3P @c3p-group.com

Deep drawing of motorcycle oil panel

for Agent

Ref. ModulesFA01-V31

Form-AdvisorStandard for MCAD

FA04-V31

Form-AdvisorProfessional

FA05-V31

Form-Advisor

professional forAutomotive

FA06-V31

Form-Advisor

professional forElectronic

FAP-01-V31 Form-Advisor Kernel (Can not be soled alone) ● ● ● ●

Form-Advisor Kernel for MCAD system

Advance meshing capabilitySPW for stamping process design

Meshing & Setup modules

Powerview for postprocess

Job sumitter and monitor

MCAD

FAM-01-V31 Form-Advisor for NX □ A □ B □ B □ B

FAM-02-V31 Form-Advisor for CREO □ A □ B □ B □ B

FAM-03-V31 Form-Advisor for CATIA □ A □ B □ B □ B

FAM-04-V31 Form-Advisor for SOLIDWORKS □ A □ B □ B □ B

FAM-05-V31 Form-Advisor for AutoCAD INVENTOR □ A □ B □ B □ B

FAO-01-V31 Form-Advisor professional user environment ● ● ●

FAO-02-V31 Springback Compensator □ ● □

FAO-03-V31 Inverse mould for one step □ □ □

FAO-04-V31 Stamping Feature □ □ ●

Solver

FAS-01-V31 Standard solver, for 1 CPU(s)/Core(s) ● ● ● ●

FAS-02-V31 Upgrade Standard solver to multi CPU(s)/Core(s) □ □ ● □

Form-Advisor V3.1 Packages and Modules

Nots for below:

A: Get one only from the list to match the MCAD system

B: Get one only from the list for the MCAD ststem

System Advice & Requirements

Display

Mouse

Harddisk

:

:

: 2

Support1280*1024 andabove resolution and 128MB displaymemory is required.

Three-button engineermouse is required.

00GB or above free harddisk space

O.S.

Processor

Memory

:

:

:

Windows XP (32bits), Vista,Windows 7 (both 32 bits & 64 bits)

Intel core i3, i5, i7 and above orAMD 2.0G and above

4GB and more memorycan get a good performance

DVD-ROM with writable capability for data backup is also an optional.

Version: FA2012R1301